Selected, peer reviewed papers from the 4th International Conference on Multi-Functional Materials and Structures (MFMS 2013), July 14-17, 2013, Sathorn-Taksin, Bangkok, Thailand
Buch, Englisch, 820 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1520 g
ISBN: 978-3-03785-771-7
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preface, Committees and Sponsors
Invited Paper
The Coexistence and Competition of Natural Fibres with Man-Made Fibres and Future Prospects
Multi-Functional Properties of Wool Fibre Composites
I. Advanced Composites and their Applications
Effect of Organoclay Dispersion on the Barrier Performance and Mechanical Strength of EVA Clay Nanocomposites
Advanced Composites with Multi-Functionality Enhanced by Nanoparticles
Influence of Organomodified Ni-Al Layered Double Hydroxide (LDH) Content on the Thermal Properties and Degradation Kinetics of Polystyrene (PS)/Ni-Al LDH Nanocomposites Prepared via Solvent Blending Method
Effects of Intermediate Layers on Chemical Ordering and Hard Magnetic Properties of L10 FePt Films
Fabrication and Characterization of Shellac/2-Isopropyl-5-Methylphenol Composite Film Patch: Physical and Antimicrobial Properties
Electroactive Epoxy-Titania Hybrid Anti-Corrosive Coatings Prepared by Small Basic Molecule-Catalyzed Sol-Gel Route
Mechanical and Morphological Properties of Silicon Carbide Filled Polypropylene Composites with PP-g-MA as Compatibilizer
Investigation of Flame Retardant Properties of Poly(ethylene Terephthalate)/Silatrane Complex/Montmorillonite Nanocomposites
Mechanical and Fractographic Studies of Surface-Treated Fly Ash Reinforced Polyester Composites
CFRP Strengthening of Reinforced Concrete Frames with Masonry Infill Walls: A Numerical and Parametric Study
Sintered Frictional Materials Based on Cu Powders
Dispersion Enhancement of Multi-Walled Carbon Nanotube (MWCNT) in Nitrile Rubber (NBR)
Nanoclay Gel for Poly(lactic Acid)/Clay Nanocomposite
Toughness and Compatibility Improvement of Thermoplastic Starch/Poly(lactic Acid) Blends
Mechanical, Thermal and Morphological Properties of Poly(butylene Succinate) Filled with Bio-Functional Filler from Eggshell Waste
Effect of Reinforcement on Flexural Properties of Brittle Composites
II. Bio-Materials and Biomimetic Materials
Synthesis of Nanocrystalline Hydroxyapatite by Natural Biopolymers Based Sol-Gel Technique
Properties of Deproteinized Natural Rubber Latex Blended Films with Glycol Penetration Enhancers for Pharmaceutical Applications
Propranolol Hydrochloride Extended-Release Matrix Tablets Using Natural Rubber Latex as Binder
Preparation of Peel-off Mask from Deproteinized Natural Rubber Latex
Effects of Drying Temperature on the Properties of Deproteinized Natural Rubber Latex/Starch Composite Films
Characterization of Lidocaine Transdermal Patches from Natural Rubber Latex
Activity of Ciprofloxacin and Tobramycin-Loaded Natural Peptide Dressing on Biofilms and Planktonic Cells
Biodegradation and Anti-Bacterial Properties of PLA and Wood/PLA Composites Incorporated with Zeomic Anti-Bacterial Agent
Effect of Biopolymer on the Dissolution and Stability of Itraconazole
Immobilization of Naringin onto Chitosan Substrates by Using Ozone Activation
Preparation of Porous Hydroxyapatite as Synthetic Scaffold Using Powder Deposition and Sintering and Cytotoxicity Evaluation
Effect of pH on Stability of Oil-in-Water Emulsions Stabilized by Pectin-Zein Complexes
Ultrasound Effect on Swelling Properties and Drug Release Behaviors of Spray-Dried Tapioca Starch Tablets
Fabrication of Shellac-Based Effervescent Floating Matrix Tablet as a Novel Carrier for Controlling of Drug Release
Behaviour of Lipid-Based Formulations Containing Nifedipine in Aqueous Media as Observed by Small Angle X-Ray Scattering
Preparation of Solid Self-Emulsifying Drug Delivery System of Manidipine Hydrochloride
PEG-Glu-PEI-Dexamethasone Conjugates: Synthesis, Characterization and In Vitro Gene Transfer Properties
The Influence of Amount of Succinic Anhydride in Chain Extension Reaction on Increasing Molecular Weight of Poly(lactic acid)
The Recovery Effect of the Translationally Controlled Tumor Protein in 2-Hydroxy-Ethyl Methacrylate-Treated Human Dental Pulp Cells
Influence of Bagasse Carboxymethyl Cellulose Addition on the Thermal and Mechanical Properties of PLA Composites
Dissolution Improvement of Itraconazole by a Nanoparticulate System Containing Lecithin-Pectin Complexes
Fabrication and Antifungal Activity of Cellulose Acetate-Based Fibers Encapsulating Natural Neem Seed Oil
Preparation of 3DP Hydroxyapatite/Polycaprolactone Composite by a Novel Sequential Infiltration Technique
Evaluation of PEG-PPG-PEG Copolymer Blends for Using as Resorbable Bone Wax
Effects of Surface Treatments of Polycaprolactone Scaffolds on their Properties
Preparation and Characterization of Plasma-Treated Porous Poly(glycerol sebacate) Scaffolds
Controlled Release of Atractylodes lancea Extract from Rice Starch-Konjac Glucomannan Film
Fabrication and Characterization of Porous Biphasic Calcium Phosphate Scaffolds by Doping TiO2
Effect of Glass Compositions on Crystallization and Mechanical Properties of Lithium Disilicate Glass Ceramics for Dental Crown
III. Intelligent Processing of Materials and Structures
Crystallization Behaviour of Polytetrafluoroethylene over very Large Cooling Rate Domains
Piezoelectric Harvesting Characteristics of BaTiO3 Microstructures for Optimal Nanogenerators
Oxygen Cold Plasma Treatment to Improve Hydrophilicity of HDPE Pellets
IV. Nano-Materials, -Sensors and -Actuators
Characterizations of Mesa Structural Near-Infrared n-Type Nanocrystalline-FeSi2/p-Type Si Heterojunction Photodiodes at Low Temperatures
Removal of Humic Acids in Water by Carbon Nanotubes
Reversible Self-Assembling of Comb-Like Functionalized Dextran Surfactant Polymers as an SPR-Sensing Surfaces
Partially Dynamically Vulcanized Thermoplastic Elastomer Based on Natural Rubber-Polypropylene-Clay Nanocomposites
Synthesis and Characterization of SPEEK/Layered Double Hydroxide Polymer Nanocomposite for Fuel Cell Applications
Tin-Powder Mediated Facile Route for the Reduction of Graphene Oxide
A Facile One-Step Hydrothermal Synthesis of Graphene/CeO2 Nanocomposite and its Catalytic Properties
Electrochemically Preparation of Functionalized Graphene Using Sodium Dodecyl Benzene Sulfonate (SDBS)
V. Engineering and Structural Materials
Studies on Thermal and Mechanical Properties of Polybenzoxazine Modified with Succinic Acid
Nonlocal Elasticity Theory for Free Vibration of Single-Walled Carbon Nanotubes
Finite Element Simulation for Creep Response of Strengthened Wood/PVC Composite
Strengthening of Gravity Load Designed Reinforced Concrete Frames with the External RC Shear Walls
Stochastic First-Ply Failure Analysis of Laminated Composite Plates under in Plane Tensile Loading
Influence of Clay Tile Brick Infill Walls on Seismic Response of Buildings
Confinement Effectiveness of CFRP in Axial Members under Various Loading Conditions
Surface Roughness Model when Machining Aluminum Nitride Ceramic with Two Flute Square End Micro Grain Solid Carbide End Mill
VI. Smart Materials and Structures
Functionalization of Amorphous Chalcogenide and Titanium Oxide Layers by Gold Nanoparticles
High CO2 Adsorption Polymeric Foam from Poly(DVB)PolyHIPE Filled with Maleimide-Terminated Poly(Arylene Ether Sulfone) Oligomers via High Internal Phase Emulsion
VII. Tribology (Surface Engineering)
Mechanical and Wear Properties of Acrylonitrile Butadiene Styrene Polymer Composites
Scratch Resistance and Adhesion Properties of PEEK Coating Filled with h-BN Nanoparticles
Comparative Studies on Wear Behaviour of Sintered 316L Stainless Steels Loaded with h-BN and MoS2
VIII. Materials for Fuel Cells and Solar Cells
Feasibility for Enhancing Power Conversion Efficiency of P3HT/C60 Polymer Solar Cell by Adding Donor-Acceptor Block Copolymer as a Compatibilizer
Morphology and Conductivity of Electrospun Dehydrochlorinated PVC Nanofibers
Nafion-Silane Modified Mordenite Composite Membrane Synthesis and Characterization for Direct Ethanol Fuel Cell
Gel Polymer Electrolyte from Poly(Acrylamide) Coated on Natural Rubber Latex by Topology-Controlled Emulsion Polymerization for Dye Sensitized Solar Cells Application
Effect of Annealing Temperature on the Optical Parameters of CdS Thin Films Prepared by Thermal Evaporation Method
Structural and Thermoelectric Properties of Zn-Doped Cuprous Aluminate Delafossite
Effect of Photocatalytic Coating on Concentrator Photovoltaic Module
IX. Natural Fiber Composites
Inhibition of Fungal Growth and Material Characteristics of PVC and Wood/PVC Composites Doped with Fungicides
Use of Natural and Synthetic Fibers as Co-Reinforcing Agents on Abrasive Wear Behavior and Flexural Strength of Wood/PVC Composites
Effect of Flame Retardants on Performance of PALF/ABS Composites
Mechanical Properties of Acrylate-Styrene-Acrylonitrile/Bagasse Composites
Microfibrillated Cellulose Reinforced Poly(vinyl alcohol) Composites
Isolation of Nanocellulose from Pomelo Fruit Fibers by Chemical Treatments
Biocomposites from Cassava Pulp/Polylactic Acid/Poly(butylene Succinate)
The Study of Using Bio-Filler from Cassava Pulp in Natural Rubber Composites
Cogon Grass Fiber-Epoxidized Natural Rubber Composites
Physical and Mechanical Properties of Wood-Plastics Composites: Effect of Types and Contents of Wood Flour
Density Reduction and Electrical Conductivity Induction in Wood Plastic Composites
Cellulose Nanofiber Reinforced Ecofriendly Green PMMA Nanocomposites
Composite Panels from Underutilized Wood and Agricultural Fiber Resources
Analysis of the Mechanical Properties of Rice Husk Reinforced Polyethylene Composites Using Experiments with Mixtures
Comparative Studies on the Mechanical and Thermo-Mechanical Performance of Flax Fiber Reinforced Polyester and Polyester-Biopolymer Blend Resins
X. Synthetic Fiber Composites
Fabrication and Characterization of Poly(vinyl Alcohol)/Functionalized Graphene Oxide Nanofibers Produced by Electrospinning Method
Studies on Mechanical Properties of Kevlar Fiber Reinforced Iron (III) Oxide Nanoparticles Filled Up/Epoxy Nanocomposites
XI. Construction and Building Materials
Shaped Textile Reinforcement Elements for Concrete Components
The Effect of Rice Husk Ash on Properties of Aerated Concrete
Estimation of Tensile Capacity of Single Anchors Including Edge Effect Using Neural Networks
An Experimental Study on Reinforced Concrete Infilled Frames with Openings
Strengthening of Reinforced Concrete Frames Not Designed According to TDY2007 with External Shear Walls
The Structural Damages and Collapse Types in Turkey, Observed after the Recent Earthquake
Evaluation of a Gravity Load Designed Reinforced Concrete Structure Failed under its Own Weight due to Creep in Concrete
The Influence of Aluminium Dross on Cement Paste's Porosity
XII. Soft Materials
Antibacterial Efficacy and Mechanical Properties of Silica Reinforced Natural Rubber (NR) with HPQM Based Neusilin
Antibacterial Ability of HPQM Base Neusilin/Natural Rubber Reinforced with Carbon Black
Ozonolysis by High Voltage Power Supply to the Melt-Extrudates of Admicelled Rubber and Natural Rubber
Cure Characteristics, Morphology and Mechanical Properties of Partially Cured NBR Blended with NR
Effect of Mixing Conditions on Phase Morphology of NR/EPDM Blends
Influence of Aromatic Content in Rubber Processing Oils on Viscoelastic Behaviour and Mechanical Properties of Styrene-Butadiene-Rubber (SBR) for Tyre Tread Applications
XIII. Functional Materials
New Polyimide Based Composite Films for Fuel Cells: Study of the Porous Structure
Anti-Algal Performances for Biocide-Enhanced Low-Density Polyethylene Film
Determining the Co-Efficient of End Constraint of Stretch Formed Microtruss Materials
Electrochemical Reactivity on Conducting Polymer Alloys
Preparation and Properties of Diol Functionalized Epoxidized Natural Rubber
Study on Nonlinear Optical Properties of BSS Material
Anti-Bacterial Efficacies and Discolorations of Polypropylene Doped with HPQM Based Water Solution and Neusilin
Synthesis and Characterization of Supramolecular Elastomers from Polyacids Composed of Vegetable Oils
Functional Modification of Bamboo Rayon (Cellulose) Fabric to Render it Antibacterial and UV Protective
Synthesis of High Quality Graphene Films by Atmospheric Pressure CVD and their Application in Laser Q-Switching
Photocatalytic Recovery of Noble Metals from Waste Solutions Using a Polyoxometallate (POM)-Based Hybrid Photocatalyst
Silica-Reinforced Natural Rubber with Epoxidized Low Molecular Weight Rubber as a Compatibilizer
Investigation of ZnO Buffer for the Optical and Electrical Characteristics of Polymer/Carbon Nanotube Composite Sol Deposited on Flexible Substrates
Comparison of Coupling Effectiveness among Amino-, Chloro-, and Mercapto Silanes in Chloroprene Rubber
Intermetallic Electrode Structure Produced by Thermal Spraying of Water-Atomized Cu-Sn Powders
Influence of Natural Rubber/Poly (3-Trimethoxysilyl Propyl Methacrylate) Core-Shell Compatibilizer on Dynamic, Mechanical and Morphological Properties of PMMA/ENR Blends
Superhydrophobic Silicon Surface with Micro/Nanocomposite Structure Formed by 2-Step Wet Etching
Effect of Heat Treatment on High Purity Nanoporous Silica Formed from Volcanic Ash Deposit Shirasu
Stochastic Nonlinear Free Vibration Analysis of Functionally Graded Beam Subjected to Thermal Loading with Random Material Properties
Effect of Blend Ratio on Phase Morphology and Mechanical Properties of High Density Polyethylene and Poly (Butylene Succinate) Blend
The Synergistic Activity of the Extracts from Mango and Cassia fistula Polysaccharide in Cotton Fabric Finishing
Influences of Coagent Hybrid Ratios and Silanes on Viscoelastic Properties of Silica-Filled HNBR
XIV. Materials Processing, Modeling and Technology
Evaluation of Cadmould Software to Simulate the Filling Phase of a Natural Rubber Compound in Injection Moulding Process
Effect of Reinforcement and Processing Methods in PP/MWCNTs Nanocomposites
Oxygen Storage Capacity of CexZr1-xO2 (0.4=x=0.8) Solid Solution Using Thermogravimetric Analysis
Sintering and Mechanical Properties of Injection Molded Low Cost Ti Alloys
Fabrication of High Resolution Microstructures Using Micro Hot Embossing with a Precision Rapid Tooling
Space-Charge-Limited Bipolar Currents at High Fields in Polymer/C60 Diodes: A Simple Model Description
Rheological Behavior and Extrudate Swell of Polypropylene/Silicon Carbide Composites
Enhancement on Stability of Nanosized Titanium Dioxide in Silicone Suspension Using Diblock Copolymer: Influence of Dispersant Structure
Ba0.9 A0.1TiO3 (A = Al and Mg) Powders Synthesized by Solid State Reaction Technique and their Dielectric Properties
Natural Rubber-Toughened Polystyrene: Effects of Mixing Procedure and Maleic Anhydride Content on Impact Property and Phase Morphology
The Sequential Analysis of Film Deformation Behavior during Successive Biaxial Stretching Process
Effects of Passes on Equal Channel Angular Pressing of 6061 Aluminium Alloy
Fabrication of Fe-36Ni Alloy Powder from its Scrap
Effects of Mold Temperature and Casting Temperature on Hot Cracking in Al-4.5 wt.% Cu Alloy
Flow Properties and Melt Distortion in Molten Rubber Compounds under Capillary Extrusion
Development of Hyperelastic Model for Weldlines Containing Natural Rubber Molded Part
Synthesis of In2O3/BiOCl Composite Photocatalyst and its Photocatalytic Activity for the Degradation of Rhodamine B under Visible Light Irradiation
The Effect of Natural Rubber Toughening on Mechanical Properties of Poly(lactic Acid)/Multiwalled Carbon Nanotube Nanocomposite
XV. Green Materials
Tensile Properties of Polypropylene/Cocoa Pod Husk Biocomposites: Effect of Maleated Polypropylene
Corn Cob Filled Chitosan Biocomposite Films
Effects of Various Co-Surfactants and Oils on Microemulsion Formation in Decylglucoside System
Elaboration and Characterization of a Novel Biobased Poly(Furfurylalcohol)/Silica Nanocomposite
Application of Non-Destructive Testing for Measurement of Strength Development of Biocemented Sand
Influence of Amino Acids on Anti-Oxidative Properties of Green Natural Rubber and Natural Rubber Compound
Biodegradation Studies of Attapulgite Clay Filled Polyvinyl Alcohol/Modified Corn Starch Blend Films: Microbial and Enzymatic
Characterization and Properties of Nucleated Polylactide, Poly(butylene adipate-co-terephthalate), and Thermoplastic Starch Ternary Blend Films: Effects of Compatibilizer and Starch
Comparative Study of the Bio-Disintegration Behavior of Polylactic Acid under Laboratory and Pilot-Scale Composting Conditions
Water Diffusion Mechanisms in New Bio-Nanocomposites Based on Polyhydroxyalkanoates/Nanoclays
Preparation of “Green” Microcapsules for Corrosion Protection: Linseed Oil Encapsulated PF Microcapsules
Bimetallic LaNi1-xCoxO3 (x=0, 0.3, 0.5, 0.7, and 1) Perovskite Catalysts for Tar Reforming to Syngas
Extraction of Keratins from Human Hair at Low Pressure and their Characterization
Evaluation of Mechanical and Thermal Properties of MCC/PLA Composite Compatibilized with Modified Cellulose
Effects of Natural Rubber Origin on Mechanical Properties of Rubber Compound in the Presence of Natural and Commercial Antioxidants
Development and Characterizations of Green Coupling Agent Coated Fly Ash Reinforced Recycled Polypropylene Matrix Composites
Extraction of Keratin from Chicken Feather and Electrospinning of the Keratin/PLA Blends
Papers as Functional Green Materials
XVI. Others
Effects of Frequency and Sonication Time on Ultrasonic Degradation of Natural Rubber Latex
Factors Affecting Formation of Emulsions Containing Soybean Oil
Theoretical Analysis and Verification of Plasticating Screw Characteristics for Injection Molding Machine
Synthesis and Thermal Stability of Cross-Linked Carbazole-Substituted Poly(dimethylsiloxane) for LED Encapsulation
Experimental Investigation of Magnetic Field Assisted Electro Discharge Deposition Process
Study on the Antioxidant Activities of Gel Containing Tagetes erecta (L.)
Morphology and Mechanical Properties of Natural Rubber-PCL Core-Shell/PLA Composites
The Crystallization Kinetics of Polypropylene/Organo Montmorillonite Nanocomposites Modified with Calcium Pimelate
Kinetic Studies on the Curing Reactions of Fluoroepoxy Oligomer and Cycloaliphatic Amine
Fabrication of Porous Copper Layers by Two-Steps Process: Electrodeposition and Combustion
Exterior Calculus: Thermodynamics and Navier-Stokes Dynamics
Radio-Frequency Sensors for Nondestructive Evaluation of Materials
The Evaluation of Mixing Characteristics of Dulmage Screw
Seismic Performance Enhancement of Non-Ductile RC Columns Using Steel Fiber Reinforced Concrete (SFRC)
An Investigation of Optimum Cutting Conditions in Face Milling Semi-Solid Cast 6061 Aluminum Alloy Using Carbide Tool
Phase Structure, Microstructure and Electrical Properties of Lead-Free (1-x) [Na0.515K0.485]0.94Li0.06(Nb0.99Ta0.01)O3 - BiAlO3 Ceramics
Temperature-Induced Shape Memory Characteristics of Epoxy Resin-Based Fabric-Reinforced Composites
