Advances in Innovative Materials and Applications

Erscheinungsjahr 2011
ISBN: 978-3-03785-229-3
Verlag: Trans Tech Publications

Buch, Englisch, 523 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1000 g

Volume is indexed by Thomson Reuters CPCI-S (WoS).This volume is divided into 3 chapters. The first, focused on Materials and Elaboration Techniques, describes various types of material such as composites, polymers, semiconductors, metals, ceramics, bio-materials, inorganic alloys, textile, porous, crystalline, amorphous and hybrids elaborated by various means such as vapor-phase, liquid-phase, plasma, ion-based and laser-assisted techniques, soft chemistry, self- assembly, bonding, sintering, and including bulk, surface, interface, thin-film and nano-materials. The second chapter, on Characterization Techniques and Properties, covers both physical (optical, structural, electrical, mechanical, magnetic, damage, aging…) and chemical (surface and bulk composition, imaging, impurity, reactivity, catalysis, aging, oxidation, corrosion) aspects. The last chapter, Applications, focuses on subjects such as: (i) environment and energy (renewable energy, storage and energy conversion, transport), (ii) health, biomedical and life science, (iii) electronic devices and systems (micro-nano electronics, power electronics, photonics and optoelectronics, systems, storage and heat management) and (iv) cultural heritage (e.g. archeology).

Autoren/Hrsg.

Soueidan, Maher

Roumie, Mohamad

Masri, Pierre

Fachgebiete

• Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde

Inhaltsverzeichnis

Preface, Sponsors and Committees
Plenary and Invited Speakers
Recent Developments in Nanoscience and Nanotechnology
Design of Functional Polymer and Composite Scaffolds for the Regeneration of Bone, Menisci, Osteochondral and Peripheral Nervous Tissues
New Approaches to In Situ Doping of SiC Epitaxial Layers
Adhesion of Rubber Materials: Surface Modification versus Formulation
Nanoporous Solids: Materials for a Sustainable Development
Poly(3-alkylthiophene) Nanofibers for Photovoltaic Energy Conversion
Fly Ash Particle Reinforced AA6061 Composites Produced by Recycling of Aluminum Chips and Fly Ash Particles
Influence of HfO2 Control Oxide ALD Precursor Chemistry for Nitride Memories
Wide Band Gap Semiconductors Benefits for High Power, High Voltage and High Temperature Applications
IAEA Activities on Cultural Heritage, Archaeology and other Characterization Applications
Chapter I: Materials and Elaboration Techniques
Effects of Aging Heat Treatment on the Microstructure of Ti-Nb and Ti-Nb-Sn Alloys Employed as Biomaterials
Effect of Powder Characteristics on the Densification of Sintered Alumina
Preparation and Characterization of High-Copper Restorative Dental Alloys Corrected
Potential of TaOXNY Thin Films Deposited by Reactive Sputtering as Antireflective Coatings: Composition and Optical Properties
Pulsed Laser Deposition of Tungsten Thin Films on Graphite
Nature and Role of Various Si-Based Sensitizers for Er3+ Ions in Silicon-Rich Silicon Oxide Thin Films
Compliance at the GaSb/GaP Interface by Misfit Dislocations Array
Streamer-Surface Interaction in Heptane with Micro-Gaps
Quantification the Effect of the Thickness of Thin Films on their Elastic Parameters
Influence of Magnetron Effect on Barium Hexaferrite Thin Layers
Effect of Deposition Time on Physical Properties of Nanocrystallized SnS Zinc Blend Thin Films Grown by Chemical Bath Deposition
Improved Endothelialisation on Nanostructured Surfaces
Oxygen-Induced Formation of Nanopyramids on W(111)
A Nano-Particle Synthesis Technology Dedicated to Solar Cells Applications
Effect of the Ball Milling Conditions, under Air, on the Preliminary Hydriding Properties of the Mixtures Mg-x Wt% Graphite. Role of Solvent
Influence of Experimental Parameters on the Synthesis of Gold Nanoparticles by Electroless Deposition
Effect of pH on the Structural and Magnetic Properties of Magnetite Nanoparticles Synthesised by Co-Precipitation
Preparation and Characterization of Transparent Electrodes Based on CNT-s Doped Metal Oxides
Effect of Surface Structure on Heteroepitaxial Growth of Silver Nanoparticles on WO3 Thin Films
Influences of Ball-Milling Time on Gas-Sensing Properties of ZnO-WO3 Nanocomposites
Investigation of the Formation Mechanisms of Pd Nanoclusters Produced Using a Magnetron Sputtering Source
Effect of Oxygen and Water in the CO Photocatalytic Oxidation with TiO2
Promoting Effect of CeO2 Addition on Activity and Catalytic Stability in Steam Reforming of Methane over Ni/Al2O3
The Performance of the Cu-Zn/CeO2 Catalysts in the Steam Reforming of Methanol Reaction
Influence of Shaping on Pd and Pt/TiO2 Catalysts in Total Oxidation of VOCs
Kinetics of Ion-Pair Effect of Aquation of Bromopentaammine Cobalt(III) Complex in Different Dicarboxylate Media
Spectrophotometric Study of Cobalt (II) Chlorocomplexes in Methanol in the Visible Domain
Chapter II: Characterizations Techniques and Properties
Mechanical Study of Copper Bonded at Low Temperature Using Spark Plasma Sintering Process
Effect of the Residual Deformation on the Mechanical Behavior of the Ni-Ti Alloy Charged by Hydrogen
Fatigue Behavior of a/ß Brass
Evaluation of Longitudinal and Transversal Young’s Moduli for Unidirectional Composite Material with Long Fibers
Modeling Shock Induced Plasticity in Copper Single Crystal: Numerical and Strain Localization Issues
From Nanoparticles to Process: An Aberration-Corrected TEM Study of Fischer-Tropsch Catalysts at Various Steps of the Process
TEM Investigation of Horizontal-Grown Silicon Nanowires
Structural Characterization of Nano-Crystalline BaTiO3 Powder Prepared Using Hydrothermal Method
The Crystal Structure of Dibromonitrotoluen (DBNT) C7Br2H5 NO2
Quantitative Evaluation of Strain in Epitaxial 2H-AlN Layers
Defect Interactions and Polytype Transitions
Characterization of Nitrided Gate Oxide Formed by RTP for SiC MOSFET Application
Investigation of Thermo-Oxidative Polyimide Thin Film Aging at High Temperature
Suitable Characterization Methods and Insulating Materials for Devices Operating above 200 °C
Annealing Effects on Electrical and Optical Properties of N-ZnO/P-Si Heterojunction Diodes
Nonlinear Electrodynamic and Optical Properties of Graphene
Effect of ZnO Nano-Oxide Addition on the Superconducting Properties of the (Bi.Pb)2223 Phase
Electrical and Optical Properties of Indium-Modified SeSbTe Thin Films for Low Power Memory Devices
Calculation of Electronic and Optical Properties of Zinc-Blende MGX ZN1-X S
Structural, Optical and Electrical Properties of ZnO Sprayed Thin Films Doped with Fluorine
Segregation and Clustering Effects on Complex Boron Redistribution in Strongly Doped Polycrystalline-Silicon Layers
Modeling of the Boron Emitter Formation Process from BCl3 Diffusion for N-Type Silicon Solar Cells Processing
Implantation of Nitrogen Atoms in 4H-SiC Epitaxial Layers: A Comparison between Standard and Plasma Immersion Processes
Weak Localization and Universal Conductance Fluctuations on Epitaxial Graphene Grown on the C-Face of 8°off-Axis 4H-SiC Substrates
Analytical Method to Calibrate Cylindrical LaBr3(Ce) Scintillation Detector
High Frequency Ultrasound, a Tool for Elastic Properties Measurement of Thin Films Fabricated on Silicon
The Low-Lying Excited Electronic States of an Alkali-Earth Compounds
Magnetic Behavior of Barium Hexaferrite Nanoparticles
Determination of Initial Magnetic Permeability of YIG Thin Films Using the Current Sheet Method
Modeling, Fabrication, and Characterization of Planar Inductors on YIG Substrates
Dielectric Properties and Raman Spectroscopy in Ca-Substituted Na0.5Bi0.5TiO3 Ferroelectric Ceramics
On the Characterization of Ultra Thin Al Films Deposited onto SiC Substrate Using PIXE Technique
Compositional Microanalysis of the Obtained Copper Silicide from an Annealed Ternary System Cu/Au/Si by Standard RBS, Microprobe PIXE, XRD and EDS
RBS Study of Multilayer Structure Material of Si/SiO2 Nano Films
On the Characterization of Boron in BGaAs Nano-Films Using IBA Techniques
Swift Quantification of Fenofibrate and Tiemonium methylsulfate Active Ingredients in Solid Drugs Using Particle Induced X-Ray Emission
LIBS for the Analysis of Metallurgical and Solar Grade Silicon
Analyses of under Pressure Polyacetylene Conductivity
FTIR Spectra of some Pyrimidine Derivatives: AM1, PM3 and AbInitio Calculations
New Type of Lime Plaster with Pozzolana Admixture for Renewal of Historical Buildings
Durability of Self-Compacting Concrete
Interaction Deep Excavation – Adjacent Structure: Numerical Two and Three Dimensional Modeling
Relationship between the Compressive and Tensile Strength of Recycled Concrete
Numerical Analysis of Slopes Stability and Shallow Foundations Behavior at Crest under Real Seismic Loading - Reinforcement Effect
Prediction of Creep Behaviour of the Hybrid Composite Material Using the Accelerated Characterisation Method
Study of Mechanical Behavior of Chips Reinforced Concrete
Conception and Construction of Biaxial Apparatus for Identification of Axial Orthotropic Material
Linearization of a Viscoelastic Model for Light-Weight Embankment
Innovative Lime-Pozzolana Renders for Reconstruction of Historical Buildings
The Analysis Stability of Anchor Retaining Wall
Stability of the Walls in Nails Soil
Direct Strain and Slope and Slope Measurement Using 2D DSPSI
Characterization of Building Stones Involved in Historical Masonry
Effect of Slag Content and Hardening Accelerator Dosage on the Physico-Mechanical Properties of Cement and Concrete
Vibration of Bridges under the Passage of Vehicles Simulated as Moving Loads
Probabilistic Analysis of Slope Stability towards the Slip by the Kinematic Method
Chapter III: Applications
DC Characterization of Different Advanced MOSFET Architectures
Characterization and Aging Test Methodology for Power Electronic Devices at High Temperature
Hydrodynamic Study of Terahertz Three-Dimensional Plasma Resonances in InGaAs Diodes
Measurements and Modeling of Conducted EMI in a Buck Chopper
Design of an Accuracy Current Sensor Using Amorphous Fine Wire of FeCoSiB
Side Gate Graphene and AlGaN/GaN Unipolar Nanoelectronic Devices
Low Cost SU8 Based Above IC Process for High-Q RF Power Inductors Integration
U-Patch Antenna for RFID and Wireless Applications
Low-Temperature Joining Technique as Interconnection Technology for Power Electronics
Low Frequency Noise Analysis in Advanced CMOS Devices
Microstrip Bandpass Sensor Based on Distributed Capacitors
Wireless Energy Transfer Using Zero Bias Schottky Diodes Rectenna Structures
Hydrogen Production by Methane Steam Reforming Over Ru and Cu Supported on Hydrotalcite Precursors
Progress in Microbial Fuel Cells Energy Production
IAEA Activities on Application of Nuclear Techniques in Development and Characterization of Materials for Hydrogen Economy
Contribution of the Luminescence Phenomena of nc-Si to the Performances of the Industrial mc-Si Solar Cells
Non-Thermal Plasma Treatment of Contaminated Surfaces: Remote Exposure to Atmospheric Pressure Dielectric Barrier Discharge Effluent
Metabolic Activation of the Organic Fraction Coated-Onto Air Pollution PM2.5 and its Genotoxicity in a Co-Culture Model of Human Lung Cells
Inorganic Chemical Composition of Atmospheric Particulate Matter around Industrial Sites in Northern Lebanon
Analysis of Physical, Chemical and Microbiological Pollution in one Right Click
Submicrometric Iron Particles for the Removal of Pharmaceuticals from Water: Application to b-Lactam Antibiotics
Toxicological Impact of Air Pollution Particulate Matter (PM2.5) Collected under Urban, Industrial or Rural Influence: Occurrence of Oxidative Stress and Inflammatory Reaction in BEAS-2B Human Bronchial Epithelial Cells (Corrected Version)
Study of Biomaterials Acoustic Signature Using Annular Lenses
Use of Cork Waste as Biosorbent for Hexavalent Chromium
Raman Spectroscopic Study on Decorative Glasses in Thailand
Characterization of Thai Amulets: A PIXE Study