Streiff / Stringer / Krutenat | High Temperature Corrosion and Protection of Materials 4 | Sonstiges | 978-3-03859-838-1 | sack.de

Sonstiges, Englisch, 1104 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g

Streiff / Stringer / Krutenat

High Temperature Corrosion and Protection of Materials 4


Erscheinungsjahr 1997
ISBN: 978-3-03859-838-1
Verlag: Trans Tech Publications

Sonstiges, Englisch, 1104 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g

ISBN: 978-3-03859-838-1
Verlag: Trans Tech Publications


Volume is indexed by Thomson Reuters CPCI-S (WoS).
The present book provides a timely update to the current understanding of degradation processes in high-temperature materials, as related to chemical interactions with the environment.
The methods used to combat this degradation - particularly by means of protective coatings and surface treatments - are also analysed in detail.
Streiff / Stringer / Krutenat High Temperature Corrosion and Protection of Materials 4 jetzt bestellen!

Weitere Infos & Material


Mathematical Modelling of Alloy OxidationThe Oxidation of Alumina-Forming AlloysHigh Temperature Oxidation of Single-Crystal Ni-Base SuperalloysHigh Temperature Oxidation of Fe-Cr-Al Alloys Containing Reactive ElementsOxidation ? Haute Temp?rature de Poudres d'Alliages MCrAlY (M=Co, Ni) ? Diff?rentesTeneurs en AluminiumIsothermal and Cyclic Oxidation of Chromia Forming Nickel-Based SuperalloysOn the Oxygen Pressure Dependence of High Temperature Oxidation of CopperThe Air Oxidation of a Cr-5wt% Ag Alloy at 650-750?CSFT Formation and Its Effect on Internal Oxidation of AgCuRelation entre la Pr?sence d'El?ments d'Alliage et les M?canismes de Croissance de la Couche d'Oxydes Form?e sur Aciers Ferritiques AlSl 430. Influence de Mn, Al et TiThe Corrosion of Fe-15wt% Y and Pure Y and Fe in H2-H2S Mixtures under 10-8 atm S2 at 600-800?CA Comparison of High-Temperature Corrosion between Cu/Ni Multilayers and Cu-Ni Alloys with the same CompositionInterfacial Reactions and Diffusion during the Thermal Oxidation of Titanium in Water VapourHigh Temperature Oxidation of Nb-Ti-Al AlloysThe Chemistry of Sulfidation Corrosion-RevisitedThe Nonstoichiometry and Chemical Diffusivity of Iron-Chromium Sulfide (Fe,Cr)1-dSPresentation of an Atlas of Chemical and Electrochemical Equilibria in the Precence of a Gaseous PhaseOxidation of AluminidesInfluence of Palladium on Diffusion Processes in the B2 NiAl PhaseEffect of Palladium and Chromium Additions on the Oxidation Behaviour of ?-NiAl AlloysIsothermal Oxidation of P/M-TiAl AlloysA New Phase in the Ti-Al-O System: Its Significance for TiAl OxidationHigh-Temperature Oxidation Life Characteristics of ODS-Fe3AlHigh Temperature Oxidation Behaviour of Ti3Al-Nb IntermetallicsTEM Investigations Concerning the Effect of Nitrogen on the Oxidation of TiAlHigh Temperature Corrosion Behaviour of Ti-46.6Al-1.4Mn-2Mo in Enviroments of Low Oxygen and High Sulphur Potentials at 750 and 900?COxidation Behaviour of Ti5Si3 at Temperatures between 1400 and 1700 KUse of a Free-Jet Expansion, Molekular Beam Mass Spectrometer to Understand Processes Involving Volatile Corrosion ProductsEffect of Silicon on the Protective Character of Cr2O3 Scales: Analyses by ''In Situ'' XPSHigh Temperature Oxidation of Fe-Al Alloys Stuedied by In Situ X-Ray DiffractionThe Use of Ion Implantation to Study the Influence of Yttrium on the Oxidation Behaviour of PM ChromiumFTIR Study of the Influence of Minor Alloying Elements on the High Temperature Oxidation of Nickel AlloysThe Use of Thin Layer Activation in Cyclic High Temperature Corrosion StudiesHigh Temperature Oxidation Behaviour of Laser Alloyed Ferritic SteelsThermal Oxidation Resistant Surface Alloys Processed by Laser Alloying on Z38CDV5 Ferritic SteelFundamental Aspects of Reactions at the Metal/Scale Interface During ScalingAtomic Transport in Cr2O3 and Al2O3 Scales: Growth Mechanism and Effect of YttriumThe Stress State in Thermally Grown NiO ScalesDetermination of Stress Gradients in a Thermally Grown Oxide Layer Using X-Ray DiffractionThe Effects of Stress on the Internal Oxidation of Ni-Cr and Ni-Al AlloysStresses in Thin Fe Cr Al Foils Related to OxidationHigh Temperature Oxidation of Thin FeCrAl StripsSpallation of Oxide Scales from NiCrAlY Overlay CoatingsLocal Analysis of the Stress Development in Alumina Scales on NiAl and FeCrAlStresses in Cr2O3 Scales Developed on Ni-30CrThe Effect of Yttrium and Sulfur on the Oxidation of FeCrAlStudy of the Reactive Element Effect in ODS Iron-Base Alumina FormersThe Effects of Reactive Element Additions, Sulfur Removal, and Specimen Thickness on the Oxidation Behaviour of Alumina-Forming Ni-and Fe-Base AlloysEffect of Impurities (Carbon and Manganese) on Iron Oxidation at High Temperature: Impurities-Rare Earth Element (Cerium) InteractionsHigh Temperature Corrosion Behaviour of Coated F17Ti Stainless SteelSol-Gel Methods for the Application of Reactive Elements on Iron-Based AlloysThe Influence of Yttrium on the Interfacial Fracture Resistance in Oxide Film/Ni-25Cr Alloy SystemsNickel Based Alloy Intergranular Embrittlement in Relation with Oxidation MechanismsContraintes de Croissance dans l'Alumine au Cours de l'Oxydation ? 1300?C d'un Alliage FerritiqueEffect of the Ordering of Metal/Oxide Interface on the Thermomechanical Behaviour of High Temperature Oxidized Metal FilmsInvestigation into the High Temperature Wear Properties of Alloys Contacting against Different CounterfacesThe Behaviour of Oxide Scales on Metals Under Erosion-Corrosion at High TemperatureSome Practical Aspects of Corrosion and Coatings in Utility Gas TurbinesCorrosion of Metallic Materials in Waste IncineratorsHigh Temperature Corrosion in Waste Incinerators Due to Deposits of Molten ChloridesCorrosion of High Alloy Steels and Fe-Cr-Alloys Beneath Deposits from Waste Incinerator PlantsThe Effect of Chemical Composition of Ash Deposit on the Corrosion of Boiler Tubes in Waste IncineratorsMaterials Issues in Coal-Fired Combined Cycle Power Generation Systems: Laboratory versus Plant TestingLimiting Factors for Fe-Cr-Al and NiCr in Controlled Industrial AtrmospheresThe Effect of Pre-Oxidation with Ceria on the Carburisation of Incoloy 800HTHigh Temperature Reaction of Chromium with Multi-Oxidant AtmospheresThe Effect of Chlorine on Mixed Oxidation/Sulfidation of Stainless Steels Below 600?CBehaviour of Fecralloy and Iron Aluminides Alloys in Coal Gasification Atmospheres Containing HCICorrosion Behaviour of some Fe-Base Alloys in H2-H2O and H2-H2O-HCI Gas Mixtures at 973 KAgeing Processes of Automotive 3-Way Catalyst Materials at High Temperatures in Sulphur-Bearing Oxidising GasesThe Influence of Si Content upon the Corrosion Resistance of Fe-12%Cr and Fe-12%Cr-12%Ni Alloys Exposed in a Reducing/Sulphidising Atmosphere at 450?CCorrosion of Several Steels afther their Exposure at High Temperature to Oxygen and Sulfur MixturesHigh Temperature Sulfidation of Al-and Mo-Modified 310 Stainless SteelHot Corrosion and its Prevention in High Temperature Heavy Oil Firing Gas TurbinesMechanisms of Hot Corrosion in Coal Fired Boilers Gas T91 and EM12 SteelsHot Salt Stress Corrosion Cracking and Corrosion Fatique of Titanium AlloysInfluence of Temperature, Sulphur Dioxide and Thermal Exchange on Deposit Induced Oxidation/Sulphidation of Alloys for Fluidized Bed CombustorsMetal Dusting of Stainless SteelsEtude des Interactions M?taux Liquides-Mat?riauxCorrosion of Immersed Ceramic Heat Exchanger Tubes in Aluminium Foundry BathsBehaviour of Thermally Sprayed Ceramic Coatings on Steel Structures in Molton Aluminium BathsInteraction of Liquid Zinc with Non-Metallic Coatings on SteelStability of Oxide Films on Liquid Metals under Vacuum: Influence on Wetting of Metals on Ceramic SurfacesCorrosion of Nickel-Chromium Alloys by Molton Glass at 1100?C: An Electrochemical StudyThe Formation and Oxidation Resistance of Boron-Modified and Germanium-Doped Silicide Diffusion Coatings for Titanium and MolybdenumMechanical and Chemical Characterisation of Coated SystemsInfluence d'un Rev?tement de Silice sur la R?activit? d'un Alliage FeCrAlThe Depositon and Oxidation Resitance of Aluminide Coatings on y-TiAlHigh Temperature Oxidation Resistant Coatings on MolybdenumOxidation and Protection of Near-Alpha Titanium AlloysSurface Coatings on Titanium Alloys to Limit Oxygen IngressTransient Oxidation of Al-Deposited Fe-Cr-Al Alloy FoilMeCrAl Coatings Obtained by Arc PVD and Pack Cementation Processes on Nickel Base SuperalloysThe Oxidative and Corrosive Degradation of Vacuum Plasma Sprayed Coatings in Industrial Gas Turbine EnvironmentsAn Assessment of Thermal Spray Coating Technologies for High Temperature Corrosion ProtectionOxidation and Corrosion of Silicon-Based Ceramics and Composites*The Corrosion of Ceramic-Matrix Composites*Oxidation and Corrosion Mechanisms for Silicon Nitride - Based Ceramics in Air and Fused SaltsOxidation Kinetics of Silicon Nitride Ceramics: Influences of the Crystallisation and Additive Enrichment in the Oxide ScaleOxidation and Reduction of Ceramic CompositesOxidation Resistance in Air of 1-D SiC (Hi-Nicalon) Fibre Reinforced Silicon Nitride Ceramic Matrix CompositeAn Oxidation of the Sintered Si3N4+ 1,5% MgO in Water Vapour at Temperatures 1073 - 1273 KHigh Temperature Oxidation of MoSi2-WSi2Solid SolutionsOxidation Kinetics of MgO-SiC CompositesComparison of the Oxidation Behaviour of Three Dense Hiped Materials: Titanium Nitride, Aluminium Nitride Materials and a 50-50 mol.% AIN-TiN CompositeHigh Temperature Oxidation Behaviour of Mullite Coated C/C Composites in AirOxidation of Al2O3-Cu CompositesInteraction between Two Ni-Base Alloys and Oxide Ceramics: SiO2, ZrO2, HfO2, Al2O3Erosion and Foreign Object Damage of Thermal Barrier CoatingsThermophysical Properties of Ceramic Layers in TBC-EBThermocyclic Behaviour of Microstructurally Modified EB-PVD Thermal Barrier CoatingsTEM Investigation on the Adhesion of YPSZ EB-PVD TBCsA Code of Practice for Discontinuous Corrosion Testing in High Temperature Gaseous AtmospheresA New Architecture for a Factual Materials Database on Coatings and High Temperature CorrosionData Management with the Corrosion Databank


Ihre Fragen, Wünsche oder Anmerkungen
Vorname*
Nachname*
Ihre E-Mail-Adresse*
Kundennr.
Ihre Nachricht*
Lediglich mit * gekennzeichnete Felder sind Pflichtfelder.
Wenn Sie die im Kontaktformular eingegebenen Daten durch Klick auf den nachfolgenden Button übersenden, erklären Sie sich damit einverstanden, dass wir Ihr Angaben für die Beantwortung Ihrer Anfrage verwenden. Selbstverständlich werden Ihre Daten vertraulich behandelt und nicht an Dritte weitergegeben. Sie können der Verwendung Ihrer Daten jederzeit widersprechen. Das Datenhandling bei Sack Fachmedien erklären wir Ihnen in unserer Datenschutzerklärung.