Selected, peer reviewed papers from the 2nd International Conference on Energy, Environment and Sustainable Development (EESD 2012), October 12-14, 2012, Jilin, China
Buch, Englisch, 2080 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 3800 g
ISBN: 978-3-03785-551-5
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preface and Conference Organization
Chapter 1: Engineering Thermophysics
Particle Motion in the Vicinity of the Wall of Circulating Fluidized Beds
Simulation of Supercharged Boiler Combustion Optimization Control Based on Radiant Energy Signal
Based on the Principle of Approximate Model Established Model Test Rig Simulation of the Actual Test Bench
Design Optimization of Convective Heat Transfer Surface of Pressurized Oxy-Fuel Coal-Fired Boiler
Investigation of Lignite Combustion Characteristics with Thermal Analysis
Precipitation Characteristics of Crystallization Fouling on Metal Surface from 0.5mmol/l CaCO3 Solution at 35°C
Study on Thermodynamic Evaluation Index of Combined Cooling Heating and Power (CCHP) System
Study on the Technology of Increasing Combustion Efficiency and Decreasing NOx Emission of Blending Coals
Co-Combustion Mechanism Analysis of Oil Shale Semi-Coke and Rice Straws Blends
Process Simulation of Oil Shale Circulating Fluidized Bed Boiler Based on Aspen Plus
Effects of Hydrothermal Dewatering on Kinetics and Mechanism of Brown Coals Pyrolysis
Flow Characteristic of a New Type of Double-Channel Air Burner in Direct Flow Pulverized Coal Boiler
Thermodynamic Performance of an Actual Thermo-Acoustic Refrigeration Micro-Cycle
Relationship between Heating Value and Proximate Analysis of Oil Shale
Numerical Study on the Premixed Combustion in Porous Media Burner
Numerical Simulation of Condenser Throat Combining with Low-Pressure Exhaust Hood for 600MW Thermal Power Unit
The Exhaust Steam Enthalpy of Steam Turbine Cognitive Modeling Based on Simplify Evidential Regression Multi-Model
The Research on Malfunction Diagnosis of Thermal Power System of Steam Turbine Based on Structure Theory
Combustion Experimental Study on Spouted Bed for Daqing Oil Shale Semi-Coke
Numerical Simulation of the Last Stage in the Nuclear Half-Speed Turbine
Study on Co-Combustion of Oil Shale Semi-Coke and Corn Stalk
Co-Combustion Characteristics of Oil Shale Semi-Coke and Corn Stalk
Pyrolysis Characteristics of Oil Sands
Fuel Control Technology during FCB Process of W-Shape Flame Boiler Unit
Study on Factors Influencing Pulverized Coal Ignition Time
The Combustion Analysis of Coal under Deflagration
Development of Combined Cooling and Power System with NH3-H2O Absorption Cycle Driven by Solar Energy
Simulation of Circulating Fluidized Bed (CFB) Boiler Oxygen-Enriched Combustion
Numerical Exploration on HCCI Combustion Characteristics under NVO Strategy
Study on Gas/particle Flows in a Down-Fired Boiler with Swirl Burners: Influence of Different Outer Secondary Air Vane Angle
The Analysis Research of Thermal System of Coal-Fired Power Plant and Examples of Applications
Thermal Calculation on SAGD Steam Delivery System
Chapter 2: Applied Thermal Engineering
Three-Dimensional Numerical Study on Thermal Performance in a Natural Draft Wet Cooling Tower
Two-Phase Flow Heat and Mass Transfer Model Construction and Experiment Study of the Fuel Evaporation Progress
Flow and Heat Transfer in Microchannels of the MTPV Systems
Air Preheaters Operating Situation and Analysis in Coal-Fired Generators
The Stability of Evaporating Thin Liquid Film Containing Insoluble Surfactant on Heated Substrate
Selection of Working Fluids for Different Temperature Heat Source Organic Rankine Cycle
Investigation on the Performance of a Trombe Wall Driven by Thermal Pressure
Coupled Heat Transfer Analysis of Piston Crown, Piston Rings and Cylinder Liner
Numerical Simulation of Temperature Field in the Cyclone
Diagnostic Method Research on the Dirty Level of the Water Side Tube and the Tightness of Vacuum System of Condenser
Numerical Simulation of Hole Shapes Effect on Film Cooling Effectiveness and Aerodynamics Loss over Flat Plate
Piston Secondary Motion Analysis Considering Head Impact
Thermal Analysis of the Ideal Free-Piston Stirling Engine Model
Quantitative Characterization of 2-D Porous Channels by Using Fractal Random Walk Method
Simulation Study on the Radiant Tube Installation Height for the Gas-Infrared Heated System
The Properties of Heat Transfer Research for the Vacuum Heat Pipe in the Magnetic Field
Abnormal Heat by Thermal Changing in a D-Pd Gas-Loading System
Thermodynamic Analysis and Experimental Investigation of Internal Heat Exchanger Influence on CO2 Trans-Critical Cycle Performance
The Numerical Simulation of the Shell Side Flow and Heat Transfer for 600MW Steam Turbine Condenser
Heat Transfer Investigation of the Circulating Fluidized Bed Evaporator for Concentrating Pineapple Juice
Performance Comparison between Metal Honeycomb and Ceramic Honeycomb in Continuous Waste Heat Recovery
Calculation Method of Attemperation Water Flow in Changing Steam Flow Condition
Numerical Simulation of Heat Transfer in Shell and Tube Heat Storage Fixed Vertical Fins
Orthogonal Experimental Research on Sintering Cooler Transfer Performance
Numerical Simulation of the Liquid Flowing and Heat-Transfer outside the Tube of the Horizontal-Tube Falling Film Evaporator
Control of Magnesium Alloys Two-Roll Strip Cast Cooling System Based on the Fuzzy Model
Impact of Carbonate Scaling on the Efficiency of Used Geothermal Water Reinjection from Low-Middle Temperature Geothermal Fluid in Xianyang Porous Geothermal Field, NW China
Conduction from Longitudinal Fin of Rectangular Profile with Exponential Vary Heat Transfer Coefficient
Numerical Simulation Investigations of DRB-4Z Type Dual Channel Swirl Burner Outlet Flow Field
Development of Micro Rectangular Channel Gas Cooler
Experimental Study on the Temperature Evenness of Heat Pipe Using Magnetic Nano-Fluids as the Working Medium in Permafrost Regions
Chapter 3: Power Machinery and Engineering
Optimization Designing of Jaw Crusher Teeth Plate Shape Based on the FEM Method
Effect of Injection Timing on Combustion Characteristics of a DI Diesel Engine Fuelled with Pistacia chinensis Bunge Seed Biodiesel
Research of the Temperature Decoupling Control for a MCFC/GT Hybrid System
Running Safety of High-Speed Train Equipped with Aerodynamic Brake under Cross Wind
An Experimental Investigation on a New Combustion System of Diesel Engine for Performance Optimization
Drawing Engine Universal Performance Characteristics Map Method Based on MATLAB
Control Strategies for Safe Diesel Particulate Filter Uncontrolled Regeneration during Idle
Research on Engine-Pump Units Adaptability in the Plateau
Simulation of Scavenging Process in a Two-Stroke Gasoline Engine
A New Skeletal Chemical Kinetic Mechanism of Ethanol Combustion for HCCI Engine Simulation
Bubble Lift-Off Diameter Prediction with New Bubble Growth Model
Mechanical Model of Variable Diameter and Screw Pitch for Biomass Screw Feeder
Optimization of No-Load Voltage Waveform in a Large Hydro-Generator by the Schemes which Shift the Damper Winding and Skew Stator Slots
Numerical Simulation on the Effects of Angle of Nozzle on Combustion and Emission for Diesel Engine
Prediction Research on the Failure of Steam Turbine Based on Fruit Fly Optimization Algorithm Support Vector Regression
Research on Signal Simulator at Crankshaft of Motorcycle Gasoline Engine
Preliminary Research for Optimization of Gas-Steam Combined Cycle Cold-End
Fault Prediction in Air-Conditioning Refrigeration System by Wavelet Transform
Large Power Hydraulic Spring Driver with Integrated Valve and Cylinder Used in High Voltage Switch
Control Strategy and Realization of Dual Fuel Engine with Intake Premixed Methanol on Turbocharging Diesel Engine
3D Numerical Simulation and Analysis of Electrically Controlled Injection Device for Gaseous Fuel Engine
Low Pressure Shaft’s Bear Vibration Treatment for a Supercritical Turbine
Analysis and Research of Force and Motion of Screw-Type Extrusion Molding Biomass
Study on Reliability Test Method of Heavy Duty Vehicle Based on Proving Ground
The Research and Design of the Expert System of Air Compressor False Diagnosis
Oil Film Properties of Three Oil Wedge Sliding Bearing and its Effect to the Rotor Stability
Resistance Coefficient Research of the Train Air Supply Orifice
Simulation Analysis of Savonius Turbine with Self-Rotating Blades
Analysis of Drive Performance of Servo System for Servo Press
Optimal Design of Preparation Parameters of Hydrous Ethanol Gasoline Fuel Based on Multi-Island Genetic Algorithm
LMS-Based Notch Filter for AMB Unbalance Compensation Control
Study of Flow Field and Filtration Efficiency in DPF
Chapter 4: Fluid Engineering and Machinery
Research for Application of Save Energy Piston Valve for Water Pump Balance Control
CFD Simulation and Experiment of Scroll Expander for Organic Rankine Systems
Study on Ring Gate Closure in still Water Based on ANSYS
Parametric Study of Cylinder Deactivation and Valve Deactivation for Unthrottled Operation
A General Model for Thermal Conductivity and Electric Conductivity of Nanofluids
Numerical Calculation of Centrifugal Fan 9-19No.4A
Simulation of Numerical Wave Based on Fluid Volume Function
The Finite Element Analysis of the Column of Wave-Power Generating Device
Analysis of the Operation Mode and Instability on the Low-Flowrate Running of Hot-Oil Pipeline
Effect of Liquid Velocity on Ultrasonic Propagation Characteristics in Pipeline
Stress Analysis of Opening and Offset Nozzle on a Cylinder
The Influence of Gas Source Conversion on Flow and Reliability of Gas Pipe Network
The Mechanism of Mangrove Tree in Wave Energy Propagation
Circulating Water Resistance Characteristics of the Thermal Power Plant
Flow Field Simulation Analysis of the Inner Stack of Coal-Fired Power Plant
Analysis of Chamber Shape’s Influencing on Axial Force in Hydrodynamic Coupling
Design and Development of Low Subsonic Wind Tunnel for Turning Diffuser Application
Experimental Study on Film Cooling Flow Characteristics of Turbine Stator Blade at Different Setting Angles
2D CFD Simulation of Hydrodynamics of the Dense Zone of a 65t/h High-Low Bed CFB
Effect of Radial Compliance Mechanism on Rotor System and Bearing Load for Scroll Compressor
Numerical Analysis of the Influence of Different-Shaped Square Cylinders on Water Flow
Design on Monitored Control System of Vessel Dynamic Cyclone Oily Water Separator
Study on Hydraulic Characteristic of Aerator with Side-Walls Sudden Enlargement in Free-Flow Spillway Tunnel
Mechanical Quadrature Methods and their Extrapolations for Axisymmetric Flow past the Torus of Anchor Ring
Flow Resistance Characteristics Analysis of Horizontal Shrinked Pipe in Dense Phase Pneumatic Conveying
The Analysis of Severe Accident Induced Steam Generator Tube Rupture and LERF Risk
Chapter 5: HVAC, Air Conditioning and Refrigeration
Automobile Air-Conditioner Control System Based on STC12C5A60S2 Single-Chip Microcontroller
Automotive Air-Conditioning Control System Based on the LIN Bus
Study on Match and Running Features of Heat Multi-Level Shunt Ground Source Heat Pump System in the Hot Summer and Warm Winter Areas
The Energy Consumption Calculation of the Fan Coil Chilled Water System Based on Variable Chilled Water Temperature and Flux
Simulation and Analysis on Operating Characteristics of Central Exhaust System in High-Rise Residential
Experiment Study of Small Composite Desiccant Wheel Based on Ceramic
Application of Heat Pump Water Heating System with Heat Recovery in Ammonia Refrigeration System
Performance Study of DC Compressor for Automotive Air Conditioning System
Analysis on Load-Undertaking of Fan Coil Unit with Fresh Air System
Influence of the Source and Sink Temperatures on the Experimental Research of a CO2 Trans-Critical Refrigeration and Heat Pump System
The Primary and Secondary Analysis of Uncertain Factors in Soil Thermal Properties for GSHP
Intelligent Heat Meter of Monitoring and Controlling System for Heating Supply Based on GPRS Network
Air-Flow Distribution Simulation and Experimental Analysis of a New Testing Room for Refrigerated Display Cabinet
Key Technologies Research of Load Regulation of Central Air-Conditioning Based on the Demand Response
Numerical Simulation on the Characteristic of a Solar Chimney
Chapter 6: Power System and Automation
Study on Effect of Neutral Grounding Mode on Reliability of Distribution Network
Based on Artificial Intelligent Algorithm for Optimization of Urban Radial Distribution Network
The Resonance Compensation Circuit Research to Wireless Power Transfer System
Optimal Capacity-Load-Ratio Research of the Multi-Voltage Distribution Network
Study on the Technical Standards of Distributed Resources Interconnection with Gird
Multiple Bad Data Identification Based on Partition and Partition Re-Combination
Reactive Power Optimization Problem Research Based on Node-Voltage-Based and Branch-Current-Based Hybrid Electric Power Network Equations
Study on Characteristics of Modes Instability in Power System with Close Modes
A Design Method of the Complementary Controller for Multi- Infeed HVDC Transmission Systems Using Singular Perturbation Theory
A Theory of Six-Line Transmission System's Fault Phase Selection Base on Wide Area Measurement System
A Hybrid Predictive Control Strategy for the Coordinated Voltage
IEC 61968 Standard-Based Distribution Systems Integration Solutions and Application Research
Design and Study of Resistance Wave Height Meter
Synthetic Risk Assessment of Catastrophic Event in Power System Based on Uncertainty
Comparative Research on Power Quality Control Technology in Distribution System
A Development Framework of Smart Grid Control System Based on MAS
Application of SVM-RBF to Prediction of Short-Term Load
A Review of Islanding Detection Method of Grid-Connected PV Power System
Study on Optimal Mode of Distributed Generation Accessing to Distribution Network
A Review on Superconducting Magnetic Energy Storage
Hybrid Electrical Storage and Power System for Household Tri-Generation Application
New Method of Measuring the Positive Sequence Parameters of Transmission Lines under Strong Interference Condition
Application of Protection Model in Novel Protection Algorithm Research
The Research Based on Zero Sequence Energy to the Line Selection in Distribution Network
Multi-Period Generation Scheduling Optimization Model and its Application
The Application of Intelligent AC-DC Integrated Power Supply System in 500kV Switching Station
Application of DG-RBFNN in Power Flow Calculation of Distribution Network with DG
The Application of Chaotic Particle Swarm Optimization Algorithm in Power System Load Forecasting
Simulation and Analysis of Synchronous Diesel Generation System Based on PSCAD
The Impact of Hydro-Turbine and its Governor System on Power System Low Frequency Oscillation
Study on the Interactive Service Architecture for Industrial User in Smart Power Consumption
The Simulation of SPWM in Voltage Source STATCOM
Methods of Getting Zero Sequence Current in a Single-Phase-to-Ground Fault
A Novel Detecting Algorithm for Harmonics and Reactive Currents under Unbalanced and Non-Sinusoidal Source Voltages
A Method of Static Security Analysis Based on Section Topology Relation
A Survey on Detecting Methods for Harmonic of Power System
Study on the Distribution Line Condition Monitoring Method Based on Real-Time Measurement Data
Study on Protection for Islanded Micro-Grid
Implement and Development of the Principle on Voltage Quality Control in 110kV-Substation
The Research of a Fast and Effective Splitting Boundary Serarching Method for Power System
A Negative Sequence Directional Element for High-Voltage Line Protections
Design of Technical Support System for Dispatching and Control Integration in Adaptation to Integrated Operation System
Coordinated Optimization and Control Technology between Active and Reactive Power
Design and Implementation of Optical Fiber Line Auto Switch Protection for Power System
Based on System Delay Time to Compensate for Harmonic Current Detection Method Research
Study on a Uniform Algorithm for Single-Phase and Three-Phase Load Flow Calculation
Study on Protective Data Flow of Intelligent Substation Based on IEC 61850
Based on the Combined Rule Power Alarm Information Intelligent Analysis Algorithm
Study on Implementation Strategy of Network Reconfiguration in Distribution System
Power Line Measurement Method Based on Vertical Baseline Stereo Camera
A New Mathematical Model to Calculate DC Transmission System’s Operating Parameters
Chapter 6: Power System and Automation
Comprehensive Evaluation Research on Grid-Connected Wind Power Based on Fuzzy Interval Analytic Hierarchy Process
The Study of Intelligent Processing Frame to Alarms in Monitoring Center
Survey of Ambient Excitation Based Power Oscillation Analysis Methods
Optimal Wind&Coal Plant Capacity Distribution among the Sending&Receiving Nodes Based on Quantum PSO Algorithm
Research on a New Control Strategy of Multi-Energy Complementary Isolated Power System
Emergency Power Support and Voltage Stability Analysis of the AC/DC Hybrid Transmission System
SVC Subsection Control Strategy Considering Voltage Stability of Dynamic Load
A Method of Real-Time Data Acquisition and Exchange in Adaptation to Integrated Dispatching Automation System
A Load Allocation Optimization among Turbine-Generators Based on GA-ACO
The Contrast between the Models’ in PSD-BPA and those in PSASP
An Integrated Protection of Micro-Grids Based on Bi-Directional Blocking Principle
New Voltage Sag Frequency Evaluation Method Considering the Satisfaction Degree of Sensitive Customer
Study on a Method of Single – Phase Grounding Fault Locating for Hybrid Transmission Line
The Application of Fixed Circuit Breaker and ATS in 380V Equipment in Substation
Case Study of Voltage Sag in Customer Substation
Black-Start Subsystem Partitioning Based on Nodes Voltage
Research on Closed-Loop Control System Based on Image-Signal Processing of Furnace Flame
Study on Fault Location of Single-Phase-to-Ground for Distribution Network
Chapter 7: High Voltage and Insulation Technology
Research of Ageing and Life Assessment Methods of Power Transformers in Nuclear Power Plants
The Application of Heterogeneous Integrated Network and Security Mechanism Research in High Voltage Transmission Line Monitoring System
The Finite Element Analysis of the Leakage Inductance for High Frequency Switching Mode Power Supply Transformer
The Partial Discharge Characteristics Study of the Insulated Copper Busbar Joint Metal Metal Protrusion Defect
Research on Aging Characteristics and Chemical Composition of Hydrogenated Transformer Oil
A New-Type Contact Structure of Vacuum Interrupters with the Saddle-Shaped Axial Magnetic Field Distribution
Partial Discharge DOA Estimation Based on Ultrasonic Array Sensor and Genetic MUSIC
UAV Based Laser Measurement for Vegetation Control at High-Voltage Transmission Lines
Study of EM Wave Propagation for Transformer PD Monitoring Using FDTD Method
On-Line Condition Monitoring for Power Transformers Based on UHF PD Measurements
Temperature Dependence of on-Line DGA Results for Transformers through Membrane Extraction
A Novel Overhead Ground Wire with Winded Insulated Conductors for Ice-Melting
Study of New Dampers for Application to Overhead Transmission Lines Groundwires
Chapter 8: Motor and Electrical
Structural Optimization of the GaAs-Based Resonant Tunneling Diodes
Direct Torque Control for Brushless Doubly-Fed Machine Based on Fuzzy-PI Regulator
New Implementation of Position Sensorless Control Based on the AC Component of SNP for Brushless DC Motor
Sliding Mode Control with a New-Style Disturbance Observer for Low-Speed Permanent Magnet Synchronous Motor
Research of the Undervoltage Tripper with Overvoltage Protection Function
Thrust Performance Analysis of Cylindrical Permanent Magnet Linear Synchronous Motor Based on Finite Element Method
Study on Main Magnetic Field in Iron Core of a Yoke-Pressing Configuration Transformer
Finite Element Analysis on Eddy Current Field of a Large Inner Feedback Motor
Modeling and Research on the Electromagnetic Field of UHV Autotransformer Using Finite Element Method
Research on Stand-Alone PMSG Voltage Stabilizing Method Based on Series Resonance
3-D Finite Element Investigation of Flux Regulation Performance of a Novel Hybrid Excitation Brushless Claw-Pole Alternator
Magnetic Field Analysis of a Complex Construction Transformer Using Direct Field-Circuit Coupling Method
Analysis of Influence to Electric Spindle Losses Caused by Carrier Ratio in Frequency Converter
The Development of a New Full-Wave Induced Excitation Synchronous Generator
Fast True RMS Algorithm Using in the High-Voltage General Inverter
Finite Element Analysis of Permanent Magnet Induction Generator
Simulation Research on the Single-Phase Operation of a Line Start Permanent Magnet Synchronous Motor
The Complete Exact Linearization Control of PMSM Chaotic Motions
Mathematical Model Research of Six-Phase PMSM
Piston Stopping Position Detecting System of Gasoline Direction Injection Engine
Structural Amelioration of 920 Nm Optically Pumped Semiconductor Vertical External-Cavity Surface Emitting Laser (OPS-VECSEL)
Chapter 9: Electrical Engineering Principles and Applications
Contrast of Two Shearing Mode for Imaging Polarimeter
Research on Modulation Method and Characteristic Analysis of Faraday DC Optical Measurement System
Arc Fault in Series Detection Technology Based on the Current Rate of Change
Multiple CMOS Intersection Measuring System Modeling and Analysis
Power Transformers Fault Diagnosis Based on Fuzzy-RBF Neural Network
The Design of Railway Wagon Anti-Theft System Based on the CC2430
An Optimization Design Method for Differential-Based Coupling Power-Slit Device
Analysis of Power System Short-Circuit Fault and its Computer Simulation
Research on the MPPT Control Strategy Based on the Former DC Convertor
Research on the Application of Transformer Vibration Model in the Detection of Turn-to-Turn Short-Circuit Fault
Research on on-Load Current Method for Detecting Fault of Transformer Core Based on the Vibration Analysis Method
A Novel MPPT Method Based on the Synthesis of Quasi-Sliding Mode Control and Dynamic Equivalent Impedance Matching Method
Circuit Model of Nonlinear Inductor with Magnetic Core Based on Duality Theory
A Research and the Application of a New Graphite Grounding
Design of Multi-Performance Monitoring and Control System for an Experimental BIPVs/BAPVs
Design of Manchester Codec Based on FPGA
Power System Reactive Power Optimization Based on Improved Genetic Agorithm
Dual-Mode Control MPPT Algorithm Based on Improved Genetic Algorithm and Perturbation and Observation Method
Reactive Power Optimization in Distribution Network with Wind Farm
Research of Intelligent Video Surveillance System Based on the 3G Technology
Distributed Generation Optimal Planning Approach Based on the Planning Platform of the Distribution Network
Study on Electricity-Theft Criterion Based on the Unchanged Line Resistance of the Distribution Network
Nonlinear Numerical Simulation on Galloping of Twin Bundle Conductor Considering the Wake Effect
Research on the Technology of Converting the Existing AC Lines to DC Lines
Application of IEC61850-80-1 in Peer-to-Peer Communication between Feeder Terminal Units
Experimental Simulation on Aerodynamic Character of D-Shaped Iced Conductor
Current Situation of Research on the Application of the Piezoelectric Energy Harvesting Circuit
Simulation of Electric Power Fluctuate Affect Transformer Substation Bus Voltage Wave by PSASP
Hardware Design of a New Instrument to Control the Heat Pulse and Measure the Temperature of Stratum
Discriminating Measurement of Temperature and Strain by Using Long Period Grating’s Spectra
Interharmonic Analysis Using MDL and TLS-ESPRIT
The SCR Protection Circuit Evaluation in HV DEMOS Devices
Chapter 10: Power Electronics and Power Drives
Research on Digital Control of Tension Servo System Based on PLC
Simulation of Two AC Motor Coiling Tension Control System
The Research of Infrared Thermometric Techniques of Electric Equipment
MPPT Control for Current Source Converter Based PMSG Wind Energy Conversion System
Fast and Effective Power Modeling for SRAM Compiler
RETRACTED: Enabling Virtual Machines and Scatter/Gather I/O Using ShernCod
Rolling Mill AGC Control System Design Based on Auto Disturbance Rejection Controller
Impacts of TCSC and FSC on the Power-Angle
Comparative Study on Control Strategies of Parallel Hybrid Active Power Filters
Numerical Simulation of a New Adjustable Mixer
The Optimization to Control System of Desulfurization in Furnace of 300MW CFB Boiler
Stability Analysis of Grid-Connected Inverter in Weak Grid Systems
A Generic PWM Scheme Be Used for CSC
Design and Analysis of 2-Stage Pipelining High-Performance SRAM
Selective Harmonic Elimination PWM Method Applied to Three-Level Photovoltaic NPC Inverter
A SVPWM Method Based on Z-Source Three-Level Inverter
Investigation and Improvement of Self-Oscillating Electronic Ballast for Local Fluorescent Emergency Light
Laser Cleaning of Neutral Attenuator Plate Based on Low Power Laser Diode
Implementation and Design of High PSRR Low Dropout Regulator
Comparative Analysis of the Control Rod Drive System
Design of Process Controller Based on PCI Interface and CPLD Technology
Based on ARM Embedded Remote Data Acquisition System
Research on Ripples Reduction of Flux Linkage and Torque for DTC
Highly Heat-Dissipating and High-Voltage SOI-LDMOS Power Device
Research on Control Strategy for the Three-Phase Grid-Connected Inverter
Study on Real-Time Detection for Referential Current of Parallel Generalized Active Power Filter
The Design of Active Power Filter Based on Power Line Carrier Communication
The Design of Automobile Collision Avoidance System Based on ARM
The Slip Frequency Control Based on Fuzzy Adaptive PID Algorithm
Research on Calculation Method of Jumper Conductor in Overhead Power Transmission Line
Development on Rehabilitation Instrument of Genu Varus or Valgum Based on Biomechanics
A Paralleled Integrated Control Device of Squirrel-Cage Induction Wind Generator LVRT
Research on the Control System of the Orthopedic Rehabilitation Bed to Cure Genu Varus or Valgum
Investigation of the Soft-Switched Electron Load
The Research on Ant Colony Algorithm-Neural Networks Model in Fault Diagnosis of Asynchronous Motor
Single Defect in Finite one Dimensional Photonic Crystals
Chapter 11: Smart Grid Technologies
Improved Immune Clonal Selection Algorithm and its Application in Power Network Planning
Research on Power Consumption Model Directing at the Intelligent Residential Quarters
Discussion on Security Protection Technology of Smart Distribution Grid
A Matrix Method for Describing the Power Transmission of Electric Network
Research of the Maintenance Scheduling Optimization Considering the Grid Risk
Protection Scheme for DC Microgrid Distribution System
Application Research on TD-LTE Technology in Communication System of Power Distribution and Utilization Network
Application of Power IoT in Intelligent Community
A Dual-Processor Based Coordinator for Micro-Grid Control and Protection
Research on the Power Balanced Scheduling Model and Methods for the Intelligent Community
Improved DC-Link Voltage Control for Double-Fed Induction Generator during Grid Fault
Distributed Network Power Flow of Distributed Generation
The Development of Load Transfer Decision Assistant System for Regional Power Grid
Study on Classification of Information to Realize Grid Intelligent
Data Storage Strategy of Electric Energy Metering Production and Dispatching Platform under Intensification Mode
Reflections on Driving Force, Connotation and Technical Area of Smart Grid
Overview on Micro-Grid Technology
Design and Application of New Merging Unit Based on Dual CPU
Scheme for on-Line Monitoring System of Converter Transformer
Broken Steel Wire Rope Inspection Based on RBF Neural Network
Bi-Objective Power Dispatch on Micro-Grid System Using Improved Genetic Algorithms
Present Situation of Research on Microgrid and the Necessity of Developing DC Microgrid
A Modified Proportional Fair Scheduling Algorithm for the Electric Power Wireless Private Network
Frequency Control Based on Multi-Agent System in Islanded Microgrid
The Design of an Independent Power Supply Applied to the Isolated Island
The Use of Distributed Energy Storage System in Smart Power Distribution and Utilization Park
Survey of Wind Power and Integration Smart Grid Technologies
The Application of Ucosf Out of Step Criterion to the East China Power Grid
A New Calibration Method for Digital Power Metering System
Internet of Things Based Auxiliary Control System for Smart Substation
Optimal Option Analysis of Distributed Generation Equipments
The Review of Demand Response Programs in Smart Grid
A Practical Method for 10kV Overhead Line Fault Detection and Location Based on Real-Time Online Wave-Recording Devices
Analysis of Rogowski Coil with Passive Compensation
Review on Grid Connection Technologies of DFIG
Microgrid Fault Analysis Based on Multiple Distributed Generations
An Application of Heuristic-Search Based Tree Model in Fault Analysis of Distribution Network
A Fault Line Detection Method Based on Wavelet Packet Analysis in Distribution Network
Modeling and Simulation of Microgrid with Small Hydropower and Wind Generator on Island Operation Mode
New Application of Fibre Optical Current Transformer in Smart Retrofit Substation
Scheme of Intelligent Building Based on Distributed Generation and Micro-Grid
The Research of Subspan Oscillation and Configuration of Spacer for Transmission Line
Leading the Smart Grid Revolution with UHV
Analysis of ACCC Applied in the Capacity Expansion Reformation of Electric Transmission Lines in East China Power Grid
Based on the EMD and PSO-BP Neural Network of Short-Term Load Forecasting
Economic Dispatch of the Microgrid with Electric Vehicles
The Applications of Wireless Sensor Network in Smart Substation
A Meta-Model of the CIM Update Process for Smart Grid Information Integration
Power System Wide-Area Situation Awareness
The Research on Preventing Mal-Operation Algorithms in Distribution Network
Optimal Allocation of Distributed Generation in Micro-Grid Based on the Theory of Life Cycle Cost
Application of Virtual Visualization in Smart Power Distribution System
Chapter 12: Power System Management
Power Demand Side Management Based on the Sensitivity Analysis
District Energy Development: Optimal Selection of CCHP System Scheme
Discussion and Realization on Quality Management Methods of Steam Turbine Unit Installation in Tianjin SDIC Jinneng Power Plant
The Economy and Environmental Benefit of the Microgrid
The Coordination Relationship Analysis of Demand Response and Orderly Power Consumption in the Smart Grid
Technical and Economic Analysis of Promoting the Application of ACCC in China
Application of Public Geographic Data in Power Engineering Survey and Design
Fire Statistic and Prevention Measures for Cables in Power Plant
Study on some Issues of Micro-Grid Commercial Promotion
Study on Key Problems at Power System Black Start
Medium and Long-Term Load Forecast Based on PSO-LS-SVR
The Equilibrium Model of Electricity Market with Consideration of the Pumped Storage GenCo
Research on Integrated Management Method for Intelligent Community
Research and Application of SNMPv3 Security Mechanism in Electricity Network Management System
Application of Critical Chain Project Scheduling Theory in Power Plant Electrical Equipment Maintenance
The Environmental Benefits-Considered Cost Characteristics of Distributed Generation Analysis
