Metal Forming 2016

Erscheinungsjahr 2016
ISBN: 978-3-03835-704-9
Verlag: Trans Tech Publications

Buch, Englisch, 1030 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1850 g

This volume of Key Engineering Materials contains papers presented at the 16th Metal Forming International Conference held in Kraków, Poland on September 18-21, 2016. Metal Forming 2016 is the 16th in a series of International Conferences organized by AGH University of Science and Technology since 1974. From 1994 to 2010 the Conference was organized biannually, jointly with the University of Birmingham, UK. The latter was replaced by the University of Toyohashi in 2010, when the Conference went, for the first time, to Japan. Metal Forming 2012 was organized in Kraków by AGH University of Science and Technology, together with the University of Toyohashi and, for the first time, by the University of Palermo, Italy, which had joined the Organization team, and hosted the Conference in 2014.
The papers published in this volume represent the state-of-the-art in the field of metal forming science and technology. The contents of papers submitted by authors representing universities, research institutes and industry from all over the world demonstrate the results of a very wide spectrum of research topics, from micro- and nano- forming, to the numerical modelling of processes and systems. Manuscripts cover a wide range of materials from metal powders, titanium and magnesium alloys to advanced high strength steels and multiphase materials.

Autoren/Hrsg.

Szeliga, Danuta

Muszka, Krzysztof

Fachgebiete

• Technische Wissenschaften Verfahrenstechnik | Chemieingenieurwesen | Biotechnologie Metallurgie
• Technische Wissenschaften Maschinenbau | Werkstoffkunde Produktionstechnik Fertigungstechnik
• Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde Materialwissenschaft: Metallische Werkstoffe

Inhaltsverzeichnis

Preface, Committees
Chapter 1: Plenary Lectures
Excellent Formability of Light Metals Sheets by Friction Stir Incremental Forming
Chapter 2: Extrusion and Drawing
Benefits of Using Diamond Dies for Cold Alternate Drawing of Magnesium Alloys
Ductility Improvement of High Carbon Steel Wire by Alternate Wire Drawing
Improvement of Ductility with Maintaining Strength of Drawn High Carbon Steel Wire
Influence of Process Parameters on the Product Integrity in Friction Stir Extrusion of Magnesium Alloys
Manufacture of Magnesium Tubes with Gradient Hardness Distribution Using a Two-Stage Porthole Extrusion Die
Numerical Optimization and Practical Implementation of the Tube Extrusion Process of Mg Alloys with Micromechanical Analysis of the Final Product
Study on Wire Rod Drawing Process Using the Rotating Die
The Effect of Equivalent Strain on Punch Load for Cold Backward Extrusion of Copper Cans
The High Speed Wire Drawing Process of Steel Wires under Fluid Frictions Conditions
Chapter 3: Formability
Evaluation of Press Formability of Pure Titanium Sheets
Formability and Surface Quality of Incrementally Formed Grade 1 Titanium Thin Sheets
Formability of AA6082-T6 at Warm and Hot Stamping Conditions
Formability of Explosive Welded Mg/Al Bimetallic Bar
Investigation on Hardening and Softening Behavior of Steel after Rapid Strain Rate Changes
The Influence of the Punch Shape and the Cutting Method on the Limit Strain in the Hole Expansion Test
Thickness and Microstructure Analysis on Hot Gas Bulged Cup-Shaped Parts of Ti-22Al-24.5Nb-0.5Mo
Chapter 4: Friction and Lubrication
Evaluation of Tribological Performance of Lubricants and Nitrided Die for Hot Forming of Steel Using Tapered-Plug Penetration Test
Extended Conical Tube-Upsetting Test to Investigate the Evolution of Friction Conditions
Identification of Friction Coefficient in Forging Processes by Means T-Shape Tests in High Temperature
Investigation on Friction Conditions during a Severe Bending Deformation on a Thick Plate
Measurement of Coefficient of Friction in Hot Stamping by Hot Deep Drawing Test
Relationship between Molecular Structures of Organic-Sulfur Compounds and Metal Forming Performance
Chapter 5: Micro- and Nano-Forming
Effect of Microstructure and Mechanical Properties Formation of Medium Carbon Steel Wire through Continuous Combined Deformation
Influence of Servo Motion on Forming Limit of Thin Metallic Foils Using Micro Bulge Test
Influence of Strain Gradient on Springback of Thin Pure Titanium Foils in Microbending Assisted by Resistance Heating
Metallic Multilayered Materials Produced by Constrained Compression
Multi-Resolution Material Hardening Law for CPFE Micro-Forming Analysis
Shear Banding in Polycrystalline Aluminium and Copper Pre-Deformed by ECAP and Subsequently Plane Strain Compressed
Chapter 6: Microstructure and Properties
A Method of Determining Unified Viscoplastic Constitutive Equations for Hot Forging Simulations
Deep Drawability and Bendability in Hot Stamping of Ultra-High Strength Steel Parts
Effect of Different Quench Media on the Microstructure and Mechanical Properties of Large-Scale Low Alloy Steel Forgings
Effect of the Time between Last Deformation Pass and Accelerated Cooling on the Mechanical Properties in Nb and Nb-Mo Microalloyed Steels
Effect of Thermomechanical and Austenite Partitioning Processing on Microstructure and Mechanical Properties of 0.4 Carbon Steel Containing Aluminum
Enhancing the Strain-Hardening Behavior of Hadfield Steel Using Ladle Treatment Technique
Examination of the Effect of Variation in Stress Magnitude on the Amount of Transformed Retained Austenite in the Structure of TRIP Steel Wires
Hot Deformation and Microstructural Characteristics of Nitrogen Enhanced 316L Stainless Steel
Investigation of Tensile and Compressive Creep Behaviour of AA2050-T34 during Creep Age Forming Process
Investigation of the Unloading Yield Effect in Aluminum and Magnesium Sheet Metal Alloys at Room Temperature
Investigation of Uniaxial Tensile Properties of AA6082 under HFQ® Conditions
Microstructural Evolution of the Magnesium Alloy AZ31 with and without SiC Particles during Ultrasonic Melt Treatment
Modelling Microstructure Evolution in ATI 718Plus® Alloy
Modelling of Flow Behaviour of Magnesium Alloys
The Onset of the Austenite to Bainite Phase Transformation for Different Cooling Paths and Steel Compositions
Chapter 7: Modelling of Metal Forming Technologies
Analysis of Material Flow in Oval Upsetting Using Mild-Wedged Die
Connection Strength of Additive Manufactured Tool Elements to the Substrate
Design of a Novel End-Effector for Kinematic Support in Incremental Sheet Forming
Determination of Processing Windows for the Hot Stamping of AA7075
Energy Efficient Servo Controlled Roll Levelling Machines
Experimental Investigation on Shape Evolution in Metal Forming Hybrid Process
Improvement of Fatigue Strength of Hole Edge of Ultra-High Strength Steel Sheet by Punching Process Including Thickening
Influence of Burnishing Conditions on Burnishing Force and Application of Coated Roller in Inclined Roller Burnishing
Influence of Cutting Processes on Edge Cracking Sensitivity of Bright Finishing Alloys
Investigation of the Relationship between Material Flow and Rollover in Double-Sided Shearing Using Image Processing
Joining of Stepped Shaft and Disc by Forming
Microstructure and Mechanical Properties of Ti/Cu Clads Manufactured by Explosive Bonding at Different Stand-Off Distances
Optimized Cooling Strategies for Bainitic Forging Steels
Prediction of Failure Mode in Hole Clinching of Al Alloy and Advanced High-Strength Steel
Prevention of Local Thinning and Springback in Hot Stamping of Thin Sheets
Process Effects in Short Cycle Stretch Forming of Tinplate Can Bodies
Production of Aluminium Based Interpenetrating Phase Composites Using Semi-Solid Forming
Reducing Blanking Vibration with Active Vibration Control Using a Servo Press
The Effectiveness of Cold Rolling for Residual Stress Reduction in Quenched 7050 Aluminium Alloy Forgings
Ultrasonic Wave Propagation Analysis for In-Process Monitoring of Stamping
Ultrasonic-Assisted Metal Staking with 15 kHz Oscillation Frequency
Ultrasonic-Assisted Upsetting of Steel with 15 kHz Oscillation Frequency
Chapter 8: Numerical Analysis and Modelling
A Comparison of Input Data Used to Represent Phase Transformations during the Quenching of a Large Nuclear Forging
A Fast Three-Dimensional Model for Strip Rolling
Analysis of Void Closure during Open Die Forging Process of Large Size Steel Ingots
An Analytical and Numerical Investigation on Flange Wrinkling Behavior in Warm Forming Process of AA5754 Using Macro-Textured Tool Design
A New Approach for Void Closure in Bulk Metal Forming
A New Method Predicting Contact Length and Flattening in Temper Rolling
Computer Simulation of the Combined Process "Helical Rolling-Pressing"
Computer Simulation of Transformation during TRIP Steel Rod Drawing
Constitutive Equation Development to Model the Hot Forging of ZERON®100 Super Duplex Stainless Steel and Associated Microstructural Evolution
Crack Formation and Propagation Mechanism in the Punching Process of High Tensile Strength Steel Sheet
Development of a Process Map for Wire Drawing of Pearlitic Steel by Finite Element Analysis Coupled with Damage Evolution
Development of the Technology of Various Large Bodies Manufacturing Based on Combined Methods of Deformation
Elastic-Plastic Thermomechanical Fatigue Analysis of Forging Dies
Extension of the Freiberger Model of Spread for the Calculation of Material Flow during Rolling of Long Products to a New Material Group of Mg Alloys AZ31, AZ81, WE43
Feasibility Study of Complex Sheet Hydroforming Process: Experimental and Modelling
Finite Element Simulation of Heat Transfer during Cryogenic Asymmetric Sheet Rolling of Aluminum Alloys
Finite Element Simulation of Shear Strain during High-Ratio Differential Speed Rolling of Aluminum Alloy 5083
Influence of Die Geometry on Drawing Force in Cold Drawing of Steel Tubes Using Numerical Simulation
Influence of Material and Tribological Modelling on the Prediction of Big Size Automotive Components Springback
Investigation into the Numerical Model Behaviour of Belleville Washers in Cold Roll Forming
Modelling Central Consolidation during Hot Rolling of Cast Products
Numerical Investigation of the Material Behaviour during Compression Tests for Samples with Rough Surfaces Represented in Different Geometry Scale Factors
Numerical Modelling of AlSi7 Tubular Components Flowformed at Elevated Temperature
Parameters Design of Discontinuous Dot Indenter in Fine Blanking Process with Different Thickness Workpiece
Prediction of Forming Limit Diagram for AA5754 Using Artificial Neural Network Modelling
Prediction of Localized Necking Based on Crystal Plasticity: Comparison of Bifurcation and Imperfection Approaches
Chapter 9: Powder Forming
An Investigation of Direct Powder Forging of Nickel Superalloy FGH96
Exploitation of Field-Assisted Sintering Technology (FAST) to Produce Pre-Forged Billets from Metastable Beta Titanium Alloy Powder
Methodology for Modelling Diffusion Bonding in Powder Forging
Supercritical Debinding of Environmentally Friendly Inconel 718 Feedstock to Metal Injection Moulding Process
Unconventional Methods of Sintering Inconel 718 MIM Samples
Chapter 10: Rolling
A Review of Microstructure and Microtexture of Tertiary Oxide Scale in a Hot Strip Mill
Hybrid Calculations of Bending Deformations for 20 Roll Cold Rolling Mill
Influence of the Deformation Method on the Microstructure Changes in AZ31 Magnesium Alloy Round Rods Obtained by the Rolling Process
Microstructure and Mechanical Properties of Multi-Pass Warm Rolled Ti-6Al-4V Alloy of Different Microstructures
Chapter 11: Sheet Forming
Deep Drawing of One-Sided, Stiffness Increasing Sheet Metal Composites
Effect of Plastic Deformation on Elastic and Plastic Recovery in CP-Titanium
Fabrication of Deep Cup with Flange by In-Plane Stretch Forming Applying Compressive Force in Thickness Direction
Friction Stir Welding of Copper Alloy CuETP
Hot Stamping of Titanium Alloy Sheets into U Shape with Concave Bottom and Joggle Using Resistance Heating
Influence of Geometrical Shapes and Sheet Thicknesses on the Dimensional Accuracy of Single and Assembled Parts
Stability of a Suppression Method of Dent and Spring-Back in Zigzag Bending of Sheet Metal/Plate
Studies on the Hot Forming and Cold-Die Quenching of AA6082 Tailor Welded Blanks
The Influence of Strain Rate and Strain on the Behavior of Stress Relaxation in 980 MPa-Grade Dual Phase Steel Sheets
Chapter 12: Tube and Hydro Forming
Effect of Multistage Deformation during the Pipe Processing on Mechanical Properties of Steels Strength Grade X70-X80
Investigation about the Oil Pressure Rate in the Warm Hydroforming of an Al-Mg Alloy Component
Investigation on the Mechanical Properties and Formability of Ti3Al2.5V Tubes Deformed at Elevated Temperatures
Numerical and Experimental Study on Sheet Hydroforming of 2A12 Aluminum Alloy
Production Technology for Precision Seamless Steel Tubes from the Perspective of Microhardness Changes
T-Shape Connector Hydroforming Process Analysis

Über Autor(innen)

Eds. Danuta Szeliga and Krzysztof Muszka