Advanced Materials Researches, Engineering and Manufacturing Technologies in Industry

Selected, peer reviewed papers from the 2013 2nd International Symposium on Materials Science and Engineering Technology (ISMSET 2013), July 27-29, 2013 Singapore
Erscheinungsjahr 2013
ISBN: 978-3-03785-802-8
Verlag: Trans Tech Publications

Buch, Englisch, Format (B × H): 170 mm x 240 mm, Gewicht: 200 g

Collection of selected, peer reviewed papers from the 2013 2nd International Symposium on Materials Science and Engineering Technology (ISMSET 2013), July 27-29, 2013 Singapore. The 208 papers are grouped as follows: Chapter 1: New and Advanced Materials and their Technologies; Chapter 2: Micro/Nano Materials and Technologies; Chapter 3: Manufacturing and Industry Engineering, Processes and Design, Geo-engineering Applications; Chapter 4: Applied Mechanics; Chapter 5: Control and Automation, Fault Diagnosis; Chapter 6: Information Technologies and Networks Engineering, Computational Methods and Management.

Autoren/Hrsg.

Tan, Hong Hua

Fachgebiete

• Technische Wissenschaften Technik Allgemein Computeranwendungen in der Technik
• Mathematik | Informatik EDV | Informatik Angewandte Informatik Computeranwendungen in Wissenschaft & Technologie
• Technische Wissenschaften Elektronik | Nachrichtentechnik Nachrichten- und Kommunikationstechnik Regelungstechnik
• Technische Wissenschaften Technik Allgemein Mess- und Automatisierungstechnik
• Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde

Inhaltsverzeichnis

Preface and Organizing Committees
Chapter 1: New and Advanced Materials and their Technologies
Direct Synthesis of Titanium Phosphates Functionalized Ordered Mesoporous Materials (SBA-15)
Research on Application Performance of Surface Anti-Corrosion Technology of Corrugated Steel Beam Guardrails
Structure of Ni80Fe20 Films Deposited on SiO2/Si(100) by Direct Current Magnetron Sputtering System with the Oblique Target
Microstructures and Properties of AISI 304L Stainless Steel Irradiated by High-Current Pulsed Electron Beam
Multi-Channel Metamaterial Sensor Based on Split Ring Resonator
Electrochemical Investigation of the Adsorption Behaviour of Guanine on Copper in Acid Medium
Microstructure Evolution of 2024 Aluminum Alloys Subjected to Thermal Cycling in Simulated LEO Space Environment
Tris (2, 2, 2-Trifluoroethyl) Phosphate (TFP) as Flame-Retarded Additives for Li-Ion Batteries
Preparation and Characterization of Activated Carbon from Palm Shell by Catalytic Activation with Steam
Study on the Preparation and Particle Size Control of Silica Sphere in a Sol-Gel Process
Synthesis of Spherical LiFePO4/C Composites as Cathode Material of Lithium-Ion Batteries by a Novel Glucose Assisted Hydrothermal Method
An Investigation on Surface Sol-Gel Silica Film
Research on Non-Linear Power Coal Blending Model and its Algorithm
Efficacy of Resinous Polypropylene (PP) Fibers on Strength Behavior of Reinforced Soils
Effects of Magnesium on Inclusions in Consumable Electrode of H13 Die Steel
Structural and Electrical Properties of Network Ni Films Sputter-Deposited at 300 K and 573 K
Technical Economic Analysis of Bioethanol
Mixed-Template Molecularly Imprinted Technique and its Application Research
Wood-Based Panels’ Properties when Subject to Temperature and Humidity Variation
Potentials and Limits of Oxidative Photocatalysisand Possible Applications in the Field of Cultural Heritage
Adsorption of Organic Substances on Modified Montmorillonite, Cloisite 10A, 15A, 20A, 25A, and 30B
The Removal of Rubber Particles from Skim Rubber Latex by Batch Adsorption Technique Using Organoclay
Compressive Strength Prediction of T300/QY8911 Composite Subjected to Moisture and Temperature Environment Condition
Lightweight Concrete Incorporating Waste Expanded Polystyrene
Investigation of Ultrasonic Effects in Cotton Dyeing Processing
Rapid Thermal Annealing on GaSb Thin Films Grown by Molecular Beam Epitaxy on GaAs Substrates
Polycalixresorcinarenes as Solid Polyelectrolytes
The Effect of Additives on the Microstructure and Properties of BaTiO3 Ceramics
Studies of Preparation and Stability of Liposomes Formed by 1,1'-[(3,5-didodeciloxycarbonyl-4-phenyl-1,4-dihydropyridine-2,6-diil)-dimethylen]Bispyridinium Dibromide
Comparison of Spectrophotometry, FAAS and ICP-OES Methods for the Determination of Trace Iron in Solar Glass
The Effects of Depositing Sn-Ag-Cu-S Systems at Different Temperatures on Silver Substrates
Mutation Analysis of a Thermostable Exo-ß-D-Glucosaminidase from the Hyperthermophilic Archaeon Pyrococcus Horikoshii and Comparison with Two Mesophilic Exo-ß-D-Glucosaminidases
Disk-Shaped Colloids: The Synthesis and Applications of ZrP Crystals
Catalytic Pyrolysis of Rice Husk via Semi-Batch Reactor Using L9 Taguchi Orthogonal Array
Synthesis and Characteristics of Thermo-and pH-Sensitive PNIPAAm/PVP Hydrogels
Preparation and Properties of Emulsion Type Sizing Agent for Carbon Fiber
A Fatigue Life Prediction Method for Composite Lamina
Synthesis and Crystal Structure of (1E,2E)-1,2-Di (-3-Nitrobenzylidene) Hydrazine under Micromave Irradiation
Synthesis and Crystal Structure of 9,9-Dipropionitrilefluorene
Effectiveness of some Nonionic Surfactants As Corrosion Inhibitors for Carbon Steel in Hydrochloric Acid Solution
Investigation of the Inhibitive Effect of Hexatriethanolamine Derivatives on Corrosion of Carbon Steel Pipelines in 1M HCI
Improving Oil well Cement Slurry Performance Using Hydroxypropylmethylcellulose Polymer
Preparation of PEI Ultrafiltration Membrane with Excellent Thermal Resistance
Effect of Holding Time on the Microstructure of Mg-3Si-1.70Sn Alloy during Semisolid Isothermal Heat Treatment
Molecular Docking Studies Involving Transitional Metal Complexes (Zn(II), Co(II), Cu(II), Fe(II), Ni(II) with Cholic Acid (AC) as Ligand against Aurora A Kinase
Synthesis and Characterization of well Defined Polychloroprene by RAFT Polymerization
Effect of Selective Solvents on Self-Assembly of Cationic Amphiphilic Triblock Copolymers Q-PVBC-b-PS-B-Q-PVBC
Alkali-Activated Matrix Based on Metakaoline with Lightweight Aggregate
Microstructural Refinement of Pure Copper by Friction Stir Processing
Effects of Variations in Annealing Temperature and Annealing Time on the Spectral and Solid State Properties of Nickel Oxide (NiO) Thin Films
Strain Induced Anomalous Magnetic Ordering in Epitaxial TbMnO3 Thin Films
A Comprehensive Research to Find Suitable Acid for Sandstone Acidizing
Optical Characterization of Novel Crystal Na5Bi (WO4)2(MoO4)2:Yb3+
Effect of Milling Time on Mechanical Properties of Fly Ash Incorporated Cement Mortars
ZnS-Intercalated Montmorillonite: A Low Cost Potentiometric Sensor
Influence of Vacuum Cathodic Arc Etching on Structure and Properties of W-Doped DLC Films
Theoretical Study on Thermal Hazardous Properties of C18H10O11 and C18H18O7 Organic Peroxides
Equibiaxial Extensional Viscosity and Network Formation of Wheat Gluten - Xanthan Gum Dough
Characterization of Kevlar Fiber-Reinforced Absorbing Composites
Use of a Dielectric Glass to Join Dielectric Ceramics for Microwave Filters
Mathematical Model of Agar Gels Rheological Behaviour in Transient/Steady State
Functional Vibro Pressed Pavement with Ecological Benefits
Hot Carrier Energy and Energy Relaxation Length in a-Se Photoconductive Target
Drift Velocity of Hot Carriers in a-Se Photoconductive Target
Interface Layers of Ag-Al Fusing Metals by Casting Processes
Microstructure and Mechanical Properties of Friction Stir Welded Annealed Pure Copper Joints
Experimental Investigation of Notched CCF300/QY8911 Composite Laminates Subjected to Tension Load
Data Mining of Nicotine Demethylase Genes in Modern Tobacoo
Chapter 2: Micro/Nano Materials and Technologies
Formation of Surface Nanoaustenite and Properties of 3Cr13 Steel Induced by Pulsed Electron Beam Irradiation under Melting Mode
Charge Trapping Properties of Au Nanocrystals with Various Sizes for Non-Volatile Memory Applications
Structure and Magnetic Properties of the Co-Ni Alloy Nanowires Prepared by AC Electrodeposition
Structure of Composite Biocompatible Titania Coatings Modified with Hydroxyapatite Nanoparticles
The Preparation of High Quality CIS Films by Spraying Citrate-Capped Cu11In9 Alloy Nanoparticles Ink and RTP Process
The Magnetic Properties of FeCoNbB Nanocrystalline Films
Catalytic Reaction-Nanogold Resonance Rayleigh Scattering Method for the Determination of Trace Tellurium
Resonance Rayleigh Scattering Spectral Determination of Se Using NaH2PO2 as Reducer
Resonance Rayleigh Scattering Determination of Trace Hemin Basing on Aptamer-Modified Nanogold Catalysis of HAuCl4-Vitamine C
Effect of Silver Coating on Barium Titanium Oxide Nanoparticle Toxicity
Study on the Composites Epoxy Resin/Nano-TiO2/Polyester
Review of Mechanical Properties and Durability of Concrete Containing Nano-Particles
Electrochemical Synthesis of CdS on Multi Walled Carbon Nanotubes Paste Electrode
Measurement of Trap Stiffness of Holographic Optical Tweezers with Power Spectrum Method
Synthesis and Characterization of Zinc Oxide Nanowires Grown Hydrothermally on Glass Substrate
Fabrication, Characterization and Drug Release Property of Protein Encapsulated Emulsion Electrospun Nanofibers
Chapter 3: Manufacturing and Industry Engineering, Processes and Design, Geoengineering Applications
Numerical Research on Mooring System of Wave Measuring Buoy
Casting Mold Designing for Double-Chamber Throttle Valve
Heat Treatment Process and Optimization of Shooting Nails
3D Dynamic Simulation and Optimization of Mammoth Desiliconization Converter for High-Quality Stainless Steel
Design of Double-Layer Copper Sheet for RFID Tags Antenna
Study on the Reverse Designing for Engine's Cylinder Head
Feasibility Study on Applying a Single Loop-Based Vehicle Detector
Improvement of Detection Method and Power Supply Device of Vehicle Detector
Numerical Simulation of Aircraft over Run Arresting System
Small Module Design of Ball Mill Main Drive Gear with F2.4×10m
Effect of Increasing Rudder Deflection on Rudder Inflow for LNG Vessel in Shallow Water
CDTAs Based Current-Mode Universal Biquad Filters with Orthogonal Control of Quality Factor and Pole Frequency
Research on Analysis of Linear Texture
An Experimental Study on the Correlation between Spray Dispersion Area and Tip Penetration Using an Edge Detection Technique of Images Captured from Highly Pressurized Cr-Di Fuel Injection
Preparation and Characterization of Nickel-Based Anode-Supported SDC Half Cell by Tape Casting, Laminating and Co-Sintering
The Design and Implement of Acquisition and Recording System for Pulse Radar
Design and Simulation of Servo System of Based on Kalman Filter
New Progress of Ship’s Increment Resistance in Waves
Study on Geometry Filtering Phenomenon and Flexible Car Body Resonant Vibration of Articulated Trains
Modeling and Optimization of Hiper Strut Suspension Based on Adams
Economic and Environmental Analysis for Steam-Driven Induced Draft Fans of 1036MW Ultra Supercritical Units
CAD Analysis of Mechatronic Device Used for Orthopaedics
Finite Element Analysis and Experiment Research on Machine Tool Cutting Force Error
Design of Pitch Curve of Internal-Curved Planet Gear Pump Strain in Type N-G-W Based on Three-Order Ellipse
Study on Molding Processing Method of New Type Shotcrete Machine Helical Blade
Conflict Modeling and Analysis of Agent Federation-Based Rapid Design for Electric Motor
Hertzian Contact Analysis of Ceramic/Metal Functionally Graded Coating
Influences of Machining Parameters on Electrode Wear in Piezoelectric Self-Adaptive Micro-EDM
Study on Application of CAE in a Centrifugal Compressor Impeller
Carrier-Diffusion Wave and Thermal Wave in a Semiconducting Microcantilever Generated by Optical Excitation
Exploration of Specialty Talents Training Program for Measuring and Control Technology and Instrumentation with the Core Features of Detection Technology
Operating Analysis and Data Mining System for Power Grid Dispatching
Research on Sedimentary Microfacies of Sandstone Group I in Putaohua Oil Reservoir of Gu83 Block in Gulong Oilfield
Seepage Stability Analysis for Surrounding Rock Mass of Diversion Tunnel by FEM
Study on Power Loss in Transformerless Grid-Connected Inverter
Analysis of Rail Traffic Measured Vibration Based on Hilbert-Huang Transform
Application of Hartmann Acoustic Generator in Source of Underwater Pyrotechnic Combustion
A Kind of Convenient Method for Testing Strength of Combined Tubing String
The Research on Sequence Stratigraphy of Shahezi Formation in Xujiaweizi Depression
Temperature Distribution and Polarization Curve Sensitivity in the Proton Exchange Membrane Fuel Cell Single Cell
Study on Volcanic Facies of Yingcheng Formation in Yaoshen Area
Analysis on the Reservoir Heterogeneity of North Lake Oilfield under Jurassic Badaowan Formation
Numerical Modelling of the Thermal Process in the Aquatic Environment
Polarization Configuration and Control Method of Micro-Raman Spectros Copy for in-Plane Strainmeasurement by Using Carbon Nanotube Sensor
Internal Energy of the Non-Spinning Black Holes
Study of Influence of Fans Arrangement to Offshore Platform Noise
The Temperature Field Distribution in Thermal Recovery and the Study on Residual Oil Distribution Laws
Analysis of Magnetic Field in Dry-Reed Relay Application Circuit
The Effect of Piston Skirt Profile on EHD Lubrication in an Internal Combustion Engine
The Role of Wind on Double Skin Facades in High Rise Office Building
The Types of Sedimentary Facies and Rock Characteristics of Xujiaweizi Fault Depression in Songliao Basin
The Influence of Microscopic Pore Structure on Microscopic Residual Oil in Sandstone Reservoir
Filter Technology in the Switching Power Supply
Analysis of Energy Efficiency in Construction Solutions at the Fac¸ade-Slab Connection
Designing a BSC Knowledge-Based Strategic Planning System
Chapter 4: Applied Mechanics
Morphology Analysis of Mixed Mode Fatigue Crack Growth in a Low Alloy Steel
Statistical Analysis on Shear Wave Velocity of Soils in Bohai Gulf
Peak-To-Peak Change in Magnetization Caused by Fracture
Numerical Simulation Analysis of the Effect on the One-Dimension Assumption in Different Diameter SHPB Pressure Bar by Two Kinds of Loading Waveform
Three Kinds of Gear Transmission Nonlinear Dynamics Models
Seismic Tests on RC Building Exterior Joints with Wide Beams
Research on the Resistance Acting on the Bucket during Shovelling
Analysis of Pitch Curve of Internal-Curved Planet Gear Pump
Numerical Analysis of Thermoelastohydrodynamic Behavior of an Elliptical Tow-Lobe Bearing
Effects of Concentration and Temperature on Rheological Properties of Mixture of HPMC and CMC Solutions
Damping Induced from the Interaction between a Vibrating Cantilever and its Surroundings
Random Vibration Analysis of Rivets on Payload Structure
Analysis and Research of Luo River Inverted Siphon Structure
Simulation Analysis for Homogeneous Earth Dam of Qijiadian Reservoir
Simulation Analysis of Bridge-Type Reinforced Concrete Inverted Siphon
Three-Dimensional Finite Element Analysis of Clay Core Wall Earth Dam
Fatigue Test Studies on Reinforced Concrete Hollow Slab Girder
RC Beam Bridge’s Fatigue Cumulative Damage Rule Research
Chapter 5: Control and Automation, Fault Diagnosis
An Inproved GA and its Application to DRP
Fault Location Based on Artificial Bee Colony Algorithm for Distribution Network with Distributed Generators
T-S Fuzzy Model Establishment and Control of Discrete Chaotic System
Adaptive Back-Stepping Control for Wheeled Robot with Uncertainty
Reading Process of Integrated Circuit Layout Debugging: Evidence from Eye Movements
Research on Control Method of Grid-Connected Inverter Suppressing Grid-Voltage Background Harmonics
Design of the Centralized Control Circuit for Large Ship Borne Squid Jigging Machine
Design of an Adaptive Neural Network Controller for Robot Manipulators
Fault Diagnosis of Grounding Grid Based on Principal Component Analysis and Fuzzy Clustering
Speed Ratio Control Study on CVT with Electrical Control and Motor as Actuator (EM-CVT)
Exponential Stability Criteria for Neutral System with Mixed Time-Varying Delays and Nonlinear Perturbations
Optimization of Level Set Segmentation with Nonlinear Coherent Diffusion
Fault Section Location in Distribution Network with DG Based on Voltage Sag Correlation Coefficient
Fault Diagnosis for Grounding Grids Based on Genetic Algorithm and Support Vector Machine
Effect of Poles to the Automatic Control System
Dynamical Behaviors of Stochastic Reaction-Diffusion Hopfield Neural Networks
Linear Capacity and Heuristic Algorithms for Multicommodity Flow in Computer Networks Engineering
A Region-Growing Adaptation-Based Algorithm for the Smart Detection of Remote Sensing Images

H8-Based LQR Control for Flexible Air-Breathing Hypersonic Vehicles with Pole Placement
Method of Detection for Complex Surfaces Based on Industrial Close-Range Photogrammetry
3D Measurement of Anatomic Parameters and Development of a Digital Design to Improve the Outcome of Lower-Extremity Surgery
Fault Locating of Grounding Grids Based on Extreme Learning Machine Elman Neural Network
Study on the Method of Radar Servo System Faults Diagnosis Based on Expert System and Neural Network
Facial Diagnosis of Chinese Medical Syndromes of CHB and its Correlation with Liver Function
Chapter 6: Information Technologies and Networks Engineering, Computational Methods and Management
Rescheduling Problems with Deteriorating Jobs to Minimize the Tardiness Costs under Time Disruptions
Research and Implementation of Time Synchronization Protocol Based on the ZigBee
CANbus Hybrid Scheduling Algorithm Based on DMS and EDF
The Allocation and Statistics of Quota of Teaching-Practicing Normal Graduates: Based on Excel Built-in Function and VBA
Differences in the Usage of Information Systems Applied by the German and Hungarian Micro-Enterprises
Game Analysis on the Shareholders, the Manager and the Auditor in Equity Incentive Process
Selection of Engineering Management University Internship Projects Based on Fuzzy Analytic Hierarchy Process
The (G'/G,1/G)-Expansion Method for Solving the (2+1)-Dimensional Breaking Soliton Equations
Wireless Sensor Network Platform Based on STM32
How to Identify the Real Requirement of Consumers
Single Machine Scheduling with Discretely Compressible Processing Times
An Efficient Image Retrieval Based on Combined Features
Research on Passenger Information System Based on Train Security Detection Sensor Network
The Vegetable Quality and Safety Traceability Model Research in China
An APIT Algorithm Based on DV-HOP Multi-Hop
An Improved DV-HOP on Weighted and Distributed Calculation Method
Energy-Efficient Routing Protocol on Mobile Sink in Wireless Sensor Network
Design and Implement an iOS-Based M-Learning Platform for University Students
Optimal Locating of Misbehavior Node in Wireless Sensor Network
A Model of Three Points for Location Estimation in Wireless Sensor Networks
Determinants for Product and Process Innovation: A Review in the Perspective of TQM Practices
Extended Mapping Approach and Exact Solutions for a (1+1)-Dimensional Benjamin-Boma-Mahony Equation
A Numerical Framework for Free Surface Flow and Wettability Based on Arbitrary Lagrange-Eulerian Method
Bending Response of Exponentially Graded Plates by a Meshless Method
Imputed Estimation For Varying Coefficient Models with Missing Covariates
Attractor and Invariance of a Class of Chaotic Dynamic Systems
Training Sequence Design Based on Channel Estimation