Tang | Micro-Nano Technology XV | Sonstiges | 978-3-03795-766-0 | sack.de

Sonstiges, Englisch, Band Volumes 609-610, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g

Reihe: Key Engineering Materials

Tang

Micro-Nano Technology XV

Sonstiges, Englisch, Band Volumes 609-610, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g

Reihe: Key Engineering Materials

ISBN: 978-3-03795-766-0
Verlag: Trans Tech Publications


Collection of selected, peer reviewed papers from the 15th Annual conference and 4th International Conference of the Chinese Society of Micro-Nano Technology (CSMNT 2013), November 3-6, 2013, Tianjin, China.
Volume is indexed by Thomson Reuters CPCI-S (WoS).
The 260 papers are grouped as follows:
Chapter 1: Micro/Nano Materials, Technologies and Application,
Chapter 2: Micro/Nanofluids Research and Technologies,
Chapter 3: Micro/Nano Research, Design and Fabrication,
Chapter 4: Measurements, Sensors and MEMS,
Chapter 5: Micro Actuators and Devices,
Chapter 6: Optical Research,
Chapter 7: Energy and Power Research and Technologies,
Chapter 8: Bioresearch and Bioinformatics,
Chapter 9: MEMS/Nano Applied Research
Tang Micro-Nano Technology XV jetzt bestellen!

Autoren/Hrsg.


Weitere Infos & Material


Microstructure and Millimeter-Wave Attenuation Performance of Exfoliated Graphite with Different Expanding VolumeInfluence on Friction Material Performance of Nano-MMT Composites of PF by In Situ MethodEffects of Different Preparation Parameters on the Properties of MAO CoatingsCharacterization of Ag-TiO2 Electronic Structures and Nanotubes Based on First-Principles CalculationImproved Study on the Performance of Polyacrylamide/Attapulgite Clay Composite Material Removing Copper (II) Ions from Aqueous SolutionThe Experiment Research of Gas-Assisted Ion Etching NanogratingDesign and Fabrication of a Micro Spring with Steel Structures for the Microtensile Testing of Thin FilmsComparative Photocatalytic Properties of Cu2O from Octahedron to Sphere StructuresResearch on Air-Media Mixed Substrate Technology of GaAs Based Millimeter Wave AntennaA Novel Nanoparticles Activation Technique for Electroless Plating on ABS PlasticEffect of Electrolytic Temperature on Nano-Hydroapatite Deposition on ASD Bioceramic FilmsPreparation and Microstructure of Layered Hydroxyapatite Nanorods on Bioceramic Coatings Using Plasma Electrolytic Oxidation TechniquePreparation and Characterization of Nanofibriled Cellulose via High Frequency Ultrasonication from CornstalkZnO/Graphene Composites: Synthesis, Characterization and Optical PropertiesThe Study of SiC Thin Films Produced by Magnetron SputteringSurface Modification of Nano-Titanium and its Effect on the Antibacterial Property of Waterborne Wood CoatingDesign and Deposition of Infrared Antireflection Protection Film on Magnesium Fluoride Substrate for 3~5 ?mDesign and Fabrication of Mult-Wave Band Yellow Laser Filter FilmDesign and Evaluation of a High-Accuracy Measurement System for Sheet Resistance of Thin FilmsOptical and Electrical Properties of P-Type N-Doped ZnO FilmPerformance of Wood Flooring UV Coatings Interfacial Modified by Nano-SilicaEffect of RuO2 on Piezoresistive Properties of CB/MVQ Composite MaterialsInfluence of Nano Abrasive on Chemical Mechanical Ultra-Precision Machining of Sapphire Substrate SurfacesThe Componential and Morphological Characteristics of Cu3N Induced by Femtosecond Laser PulsesVisible Light Photocatalytic Degradation of Methylene Blue over N-Doped TiO2Study on the Influence of N-Doping to the In Situ Growth TiO2 Film Photocatalytic CharacterEvaluation of Annealing Effects on TiO2 Nanorod Arrays for Dye-Sensitized Solar Cells by Equivalent Circuit AnalysisGraphene Synthesis on Specified LocationExperimental Investigations of the Detonation Synthesis of Micron Al2O3 by the Precursor of Thermal DecompositionStudy on Preparation and Resistive Switching Characteristics of SnO2 Films?Double Junction? of Ag-Doping TiO2 NanotubesSynthesis and Characterization of Highly Dispersed and Homogeneous Nano Zinc Oxide RodsEffect of Milling Time on Properties of Ti-48at%Al Composite Powder Prepared by High Energy MillingDirectly Writing Nanodots on Silicon Surface by Combined-Dynamic Dip-Pen NanolithographyThe Effective Thermal Conductivity of Porous Polymethacrylimide FoamsDesign and Fabrication of BaTiO3 Crystal Thin-Film WaveguidesExperimental Investigation of Microstructure and Piezoresistive Properties of Phosphorus-Doped Hydrogenated Nanocrystalline Silicon Thin Films Prepared by PECVDResearch on Graphene Preparation by Liquid Phase Ultrasonic Exfoliation and Antifriction Performance in WaterTribological Properties of Nano-MMT/In Lubricant Additive on 45#Steel Tribo-PairEffects of Electrolyte Composition on the Properties of Micro-Arc Oxidation Coatings Formed on 6063 AlloyEffect of Size of Graphite Flakes on the Physical Properties of the Graphite MaterialsResearch on the Preparation of Antimony Nanoparticles by Mechanical Ball MillingPreparation and Photocatalytic Properties of Rod-Shaped TiO2 Based on Salix FiberDeposition and Characterization of Mg Doped CuCrO2 Films by DC Magnetron SputteringFabrication and Phase-Transition Characteristic Investigation of Nanocrystalline VO2 Thin FilmControllable Self-Assembly of 9,10-Diphenylanthracene into Micro-Nanostructures from 0-Dimension to 3-Dimension by Simple Post-Drying Thermal Annealing MethodStudy on the Improvement of Microprism Retroreflective MaterialResearch on the Sol-Gel Method of Preparing Ternary Nano SiO2-Al2O3-TiO2 MaterialsSynthesis of Nanosized NaY Molecular Sieve under Dynamic Hydrothermal CrystallizationPreparation of Nano Silicon Dioxide with Sol-Gel MethodFabrication of Bi2Te3 Nanowires Applied in Thermoelectric GeneratorsStudy on the Photocatalytic Degradation of Diesel Pollutants in Seawater by a Prepared Nano Ag-Droped Zinc OxidePhotocatalytic Degradation of Diesel Pollutants in Seawater by Using Nano Li-Doped Zinc Oxide under Visible LightStudy of Birefringence and Mode Field for Hollow-Core Photonic Bandgap FiberPhotoelectric Properties of Metallic Mesh Based on Flexographic PrintingComparable Studies on Photocatalytic Activities of Ag3PO4 Microspheres and PolyhedronsSwitchable Wettability of Silicon Micro-Nano Structures Surface Produced by Femtosecond LaserSynthesis and Luminescent Properties of Eu3+ Doped Lu2O3 Powders Using Micro-EmulsionEquivalent Mechanical Properties of Graphene Predicted by an Improved Molecular Structural Mechanics ModelNanomechanical Properties and Surface Wettability of Carbon Films Prepared by Magnetron SputteringA Study of Abrasive Rotating Velocity Effect on Monocrystalline Silicon in Ultra-Precision Mechanical Polishing via Molecular Dynamic SimulationPreparation of Alumina Nanowires by Etched Method in Acid SolutionPreparation of TiO2 (Au) Nanotubes by Hydrothermal Method for Photocatalytic Reduction of Cd2+ IonsResearch on Multi-Walled Carbon Nanotubes by Fiber Laser IrradiationTheoretical and Experimental Research of CO2 Absorption Enhancement by Carbon Nano-TubeEffect of Balls/Powder Weight Ratio in Milling on Microstructure and Properties of MWCNTs/Cu CompositesMolecular Dynamics Simulation of ZnO Nanowire ManipulationVertically Aligned Carbon Nanotubes Transfer with Glass FritElectromagnetic Induction Heating Bonding between Carbon Nanotubes and Metal ElectrodeChange the Magnetic Properties of Electroplated Core Films to Improve Micro-Fluxgate PerformancePreparation of PLA and PLGA Magnetic Microspheres with T-Shaped Microchannel ReactorCell Immobilization and Detection Using Surface Plasmon Resonance Biochemical Analysis System Based on Nano SiO2 FilmPreparation and Antibacterial Bioactivity of Ti-Base Titania Nanotube ArraysStudy on Preparation of Chitosan Microspheres Loaded with LevofloxacinFenton Degradation of Methylene Blue by CuFeS2 Ultrafine PowdersStudy and Fabrication of Filter Film in Tactical Optical Fiber Communication SystemEmbedded Seal Cavity Fabricated in HTCC MEMS TechnologySelf-Assembly of a Superhydrophobic ZnO Nanorod Arrays Film on Wood Surface Using a Hydrothermal MethodPreparation and Application of Macropore Nanometer Host-Guest CatalystLarge-Area Self-Assembled Monolayer of Silica Microspheres by Convective AssemblyAssessment on the Collection Efficiency of an Aerosol Sampler in Micro and Nanoparticles EnvironmentGlass Frit as a Hermetic Joining Material for Bonding among Three Wafers with Metallic Film Feed-ThroughNumerical Simulation of Microstructure Evolution in AZ31 Magnesium Alloy during Equal Channel Angular PressingFracture Behavior of Cu/Cu?WCP Layered CompositesExperimental Research on Influence of Temperature and Compression on Wrinkle Evolution of Thin Films on Compliant SubstratesInvestigation on Dissolving Process of Secondary Phases and Austenitic Grain Growth in a Microalloyed SteelEvolution in Dislocation Configuration of Deformed Fe-40Ni-Ti Alloy during Isothermal RelaxationViscous Dissipation of Polymer Melt in Micro Channels and Macro ChannelsInfluence of Sonomechanical Treatment on the Structure of Cellulose Micro/Nano FibrilsExperimental Investigation and Numerical Simulation of Pure Copper Foil Springback in Micro-Bending ProcessSmoothness Control of Wet Etched Si{100} Surfaces in TMAH+TritonFabrication, Characterization and Photocatalytic Activity of TiO2/Cellulose Composite AerogelThe Fabrication of High Resistance-Temperature-Coefficient Vanadium Oxide Film by Magnetron Sputtering MethodResearch on the Characterization of Ultra-Smooth K9 Glass Surface Polished by Nanoparticle Colloid Jet MachiningThe Research of Gypsum Investment Mould Used as Forming Micro-CastingsFabrication and Characterization of Transparent ZnO Film Based Resistive Switching DevicesSize Distributions of Mesophase Microbeads Obtained from Heterogeneous and Homogeneous SystemsFabrication of Filter Film Using in Polarized Light Guide Prism SystemExperimental Study on Dispersion Stability of Rutile TiO2 Nano-Particles Suspension of Ammonia-Water SolutionMultilayer Microfluidic Electrokinetic Device with Vertical Embedded ElectrodesResearch of Removable Electrodes Based on Microfluidic ChipEffect of Joule Heat on Hydrophily of MicrochannelNucleation and Growth Characteristics of Bubble in Subcooled Flow Boiling in MicrochannelEffects of Wall Slip on Filling Flow for Polymer Melt in Micro Injection MoldingResearch of Magnetic Fluid under the Orthogonal Stationary Magnetic FieldNumerical Simulation of Jetting Instability in Flow Focusing MicrofluidicsImproving the Current Stability through the Bubbles-Free Microfluidic Electro-Spray Ionizing ChipA Microfluidic-Based Trapping and Positioning Method for Single CellsThe Tunable Optofluidics Waveguide Design Based on the Novel Dual Side-Coupled Cavities Plasmonic StructureOrganic Solvent Fumigation Bonding for Multi-Layer Poly(methyl Methacrylate) Microfluidic DeviceSwirl-Based Non-Contact Method of Cell Orientation ControlPreparation and Thermosensitivity of N-Isopropylacrylamide Microgels Containing L-PhenylalanineA Test Droplets Dispensing Solution for Digital Microfluidic Biochip Parallel TestingNumerical Analysis of the Liquid Crystalline Backflow-Driven Effect under a Continuous Square Wave Electric FieldNumerical Simulation of the LCP Hele-Shaw Flow Based on the Injection Molding ProcessDesign and Fabrication of Universal Inertial Switch Based on MEMS TechnologyDesign of Microwave Reconfigurable Equalizer Based on MEMS TechnologyResearch about Flexible PDMS Micro-Perforated Panel Based on MEMS Silicon MoldResearch of Micro-Inertial Device High-Aspect-Ratio Etching ParametersA New Method to Analyze the Stiffness of MEMS AccelerometerNoncircular Tool Fabrication by WEDG Using Electrode Jump Motion and Noncircular Array Holes DrillingArchitectural Design and Simulation of a Fourth-Order Sigma-Delta ModulatorResearch on Fabrication and Electronic Characteristics of Dual-Extended Nano Structure MemristorInteraction Effects of Micronozzle Geometric Parameters on Propulsion PerformanceStudy on Fabrication Process of SU8 Photoresist Microstructures and Evaluation of Stress GradientUltra-Precision Machining of Off-Axis Convex Ellipsoidal Surface Using Two Different Accurate Spiral Tool PathsGraphitization Wear of Diamond Tool in Nanometric Cutting of Single Crystal SiliconFabrication of the Silicon-Based Three-Dimension Neural Probe ArraysTwo Benches PDMS Free Flow Electrophoresis ChipPolarization-Insensitive Holey Fiber with Ultra-Small Mode Areas Using a Cross-Slot-Structure CoreThe Enhanced Raman Scattering from Ag Nanoball/ZnO Hollow Nanosphere Arrays Fabricated by Laser-Induced AnnealingMethod to Design and Fabricate a Novel RF MEMS SwitchThermoelectric Device Based on Vertical Silicon Nanowires for On-Chip IntegrationThe Fabrication of Trans-Scale Micro-Fuze Safety DeviceDesign of Intelligent Meteorological System Based on MEMSUltrasonic Modulating Compound Discharge ? Electrochemical Micro-Fine Machining Technology and its ApplicationsStudy on Parameters of MEMS Planar Zigzag Slot for FuzeCantilever Piezoelectric Micro-Pump Modeling Based on Bond Graph PortStudy on Shock Resistance of MEMS Devices with Different StoppersCorner Effect of Micro-Comb Capacitive StructureThe Vibration Pickup of Micro-Pump Diaphragm Based on MEMS Technology DesignFabrication and Formation Mechanism of Electrospun Spatially Defined Fibrous Patterning Structures on Conductive and Insulating SubstratesEffect of Strain Rate on the Simulation of MEMS Safety and Arming DeviceDesign and Analysis of a Novel Locking Mechanism of MEMS Safety and Arming DeviceCompact Compound Imaging System with Large Target SurfaceSustained-Release Performance In Vitro of BCG/Fe3O4/Chitosan Thermosensitive Gel Integrated Material for Irrigation Therapy of the Bladder TumorThe Influence and Control of Encapsulation Moisture in MEMS GyroscopeA Micromachined Glucose Monitoring Sensor with Diffusion ControlA Solid-Core Photonic Crystal Fiber NanosensorMiniature Stress Test of Miniature Components Based on Piezoresistive Stress Sensors Test CircuitPerformance Test for Nanometer Accuracy Capacitance Displacement SensorDesign of the Digital in Signal Processing Platform of the Gyroscope Based on FPGAStudy on Measurement Method of Dynamic Linearity for High G Micro AccelerometerThe Structure Design and Simulation of the Ring Resonator Based on SOI Planar Optical Waveguide for the Micro Biochemical SensorA MEMS-Based Electrostatic Field Sensor Using Out-of-Plane Thermal ActuationExperiment Research on Array Grouped by MEMS Vector HydrophoneStudy of a Temperature Detection Sensor in Road Surface Sensors SystemDesign of Road Condition Sensor Based on Multiple Frequency Detecting TechnologyDesign of Charge Pump for Inertial Sensor Drive CircuitControl System of an Electromagnetic Vibrating Ring GyroscopeA New Readout System for LC Resonant SensorsA High-Resolution Lowpass Sigma-Delta Modulator Applied in Micro-GyroscopeStudy on MEMS Capacitive Differential Pressure SensorA Novel Passive Wireless Humidity Sensor Based on a Dual-Metal InductorMixed Mode Driving Circuit of Quartz Gyroscope Interface CircuitResearch on the Phase Difference Extraction Algorithm of the Free-Drive Three-Axis MEME Gyroscope Used in Spinning ProjectilesThe Impact of Typical Aerosol Types on Polarization Sensitive Spectral for Bionic Micro-Nano Polarization SensorA Wireless Power-Free Pressure Sensor for Real-TimeIn VivoGastrointestinal Pressure MonitoringA Readout System Design for LTCC-Based Piezoresistive AccelerometerDesign and Experiment of Ultrasonic Anemometer Using TDC-GP2 Time-to-Digital ConverterAFM Fast Tip Approach Based on Fiber Optic SensorThe Delta-Sigma Modulator of Fractional-N Frequency Synthesizer for Wireless Sensors Network ApplicationsResearch for the Resonator Structure Process Technology of Resonant Pressure SensorsDesign of Water Pressure Sensor Applied to the Eye Aqueous Humor DetectionThe Design and Simulation of Vibratory Ring GyroscopeA SOI-MEMS Based Resonant Barometric Pressure Sensor with Differential OutputDesign of Guided Shell Inclination Measurement and Display System Based-on MEMS AccelerometerResearch on Zero Bias Characteristic of MEMS Accelerometer in FBWThe Design and Simulation of Wide Range Pressure Sensor Based on HTCC for High-Temperature ApplicationsSilicon Thermal Flow Sensor Based on Ceramic SubstrateFabrication and Characteristics of the 2D Magnetic Sensor Based on the MOSFET Hall DeviceThe Design of Gm-C Low-Pass Filter for Micromachined GyroscopeA 16 Bits Sigma-Delta Modulator Applied in GyroscopeCharacteristics Research of Hall Magnetic Sensor Based on Nano-Polysilicon Thin Film TransistorsFabrication and Characteristics of Silicon Bridge Magnetic Sensor Based on Cantilever BeamThe Design and Experiment of a Two-Dimensional Position Sensitive Detecting (PSD) Sensor Based on Avalanche BreakdownFabrication and Characteristics of Silicon Bridge Magnetic Sensor Based on Nano-Polysilicon TFTsDesign and Optimization of Sigma-Delta AccelerometerDesign, Fabrication and Test of In-Plane MEMS Piezoresistive High-g AccelerometerThe Design of Lead Compensator for S? Micromachined AccelerometerHigh Precision Double-Interferometry for Large Step-Height On-Line Measurement Using Waveform Transforming TechnologyAccuracy Analysis of Quality Factor Measurement Based on Time Domain Method for MEMS ResonatorsA Novel Noise Reduction Algorithm of MEMS Gyroscope Based on Compressive Sensing and Lifting Wavelet TransformMicro-Machined Gyroscope Mathematical Model and Error AnalysisFinite Element Analysis on Thermosonic Ball Bonding Process of MEMS ChipLateral Resolution Test for Confocal Laser Scanning MicroscopeFabrication and Packaging of Electromagnetic 2D MEMS Scanning MirrorTightness Detecting Technique for the Valves of Diaphragm Gas Meter Based on Chromatic Confocal MethodDesign of Third-Order Single-Loop Full Feed-Forward Sigma Delta ModulatorQuartz Crystal Double-Ended Tuning Fork Resonator for High Resolution Force SensingRapid Temperature Measurement of Meteorological Detection System Based on MEMSThree-Dimensional Measurement System Based on Micro StereovisionMicron and Nanometer Measuring Methods Based on Metrological Scanning Electron MicroscopeControl for Multi-DOF Micro-Order Planar Motion Stage Based on Sliding Mode ObserverAnalysis of Influencing on the Ground Calibration for PIG Based on SeasonsError Compensation Technology of Semi-Strapdown MEMS Inertial Measurement SystemThe Triaxial Angular Rate Measurement System Based on Two MEMS Accelerometers Used for Rotating CarrierResearch on MEMS Based Real-Time Measurement System for the Nuclear Fuel Transport CaskCompact Polarization Beam Splitter Based on Surface Plasmon Polariton Silicon WaveguideThe Design and Realization of Micro Induction Heater for the Thermal Bubble GenerationAutomated and Optimal Actuation Voltage Waveform Design for Contact Bouncing Mitigation of MEMS SwitchesThe Research of Industrial Brake Temperature Measurement Based on Nano-Materials and Nano-TechnologyHysteresis Compensation of MSMA Actuators Based on Neural Network ModelA High-Order Sigma-Delta Modulator Applied in Micro-AccelerometerSliding-Mode Control for Piezoelectric Actuators Based on Hysteresis ObserverAn Electromechanical Tunable Grating on Silicon-on-Insulator PlatformSliding Mode Control for Electromagnetic Actuation MOEMS Scanning MirrorOne-Time Use MEMS Metal Bridge Igniter Based Electro-Explosive Solid Off-On SwitchOptimization of Element Parameters for a New OPFC Ultrasonic Phased Array TransducerFocusing Actuating Performance of OPFC Phased Array Transducer Based on DPSMNovel Integrated Demultiplexer with the Bragg Grating Structure Based on Surface Plasmon PolaritonsResearch of Optical Characteristics of Diffuser with Taper Microstructure by Micro Injection MoldingStudy on Measuring System of Automatic Image Alignment Refractive Index Based on New Mathematical ModelThe Precision Observation of Projection Model for Microgripper System Based on Stereo Light MicroscopeResearch of the PZT Polarization for Deformable MirrorAcoustic Noise Energy Scavenger with Noise Reduction EffectThe Influence of Electrodes Position to Alternating Current Annular MicromixerDesign and Research of Dynamical Property Testing System for Nano and Micron Inertial ComponentsKinematic Analysis of Ultrasonic Vibration Assisted Micro End GrindingArtifacts in KPFM in FM, AM and Heterodyne AM ModesResearch on Natural Frequency of MEMS Structure with Meander Suspensions by Mechanical Character AnalysisTolerance Analysis of Comb-Driving Double Ended Tuning Fork Resonator Fabricated by DRIE TechnologyEffects of Structure and Air Damping on Quality Factor under Various Pressure Environments Based on Experimental ResearchEffects of Droplets' Collision on Heat and Mass Transfer between High-Temperature Gas and Micron Water DropletsObservation of Ferromagnetic Resonance in Magnetic Exchange Force Microscopy (MExFM)Investigation on Multi-Piezoelectric Effects from the First Positive Piezoelectric EffectThe Failure of the Novel Solid MEMS Switch in Multi-Physical Coupling FieldStudy on Small PV Intelligent Power Supply SystemResearch of Street Lighting System Based on Piezoelectric Energy GeneratorPower Handling Capability Improvement of Metal-Contact RF MEMS Switches by Optimized Array Configuration Design of Contact DimplesVoltage Reversal of Microbial Fuel Cells Stacked in SerialResearch of a New Type Rectifier and Voltage-Multiplier Piezoelectric Energy Harvester CircuitEffect of Wrinkled Microstructure on Surface Wettability of Ginkgo LeavesPrecise Measurement and Feature Information Extraction of the Key Drag-Reducing Structures of SharksHistogram Based Bacteria Colony Features AnalysisEffects of Nano-Devices on Growth, Quality and Activities of Enzymes in Nitrogen Metabolism of Hydroponic LettuceDesign and Simulation of a Parylene-Based Three-Dimensional Cuff Electrode for Peripheral Nerve StimulationA Transdermal Miniature Syringe Design Based on Port Ontology for Drug DeliveryCalibration of Weights and Weight Sets Based on Micro-Mass Standard Measurement SystemExperiment and Simulation of Hard Cutting System Dynamic CharacteristicsA Nonlinear Approach for Dynamic Responses of a Nano-Beam Based on a Strain Gradient Nonlocal TheoryEffect of Micro-EDM on Diameter Consistency of Micro-Hole ArraysReliability Factors Analysis of MEMS Safety and Arming SystemSimulation of Nanoimprint Based on PSQ-L PolymerRF Performances of MEMS Suspended Inductor under High Overload EnvironmentsResearch on the SINS Algorithm Based on Spiral VectorResearch on Catalyst Penetration Process of Patternless Casting Manufacturing TechniqueExperimental Research on WEDM Machining for Metal Components with Micro/Meso-ScaleHeat Transfer Characteristic of Flat Trapezoid Grooved Micro Heat PipesA New Head Tracking MethodNanotechnologies for Potential Environmental Applications in Groundwater and Soil


Ihre Fragen, Wünsche oder Anmerkungen
Vorname*
Nachname*
Ihre E-Mail-Adresse*
Kundennr.
Ihre Nachricht*
Lediglich mit * gekennzeichnete Felder sind Pflichtfelder.
Wenn Sie die im Kontaktformular eingegebenen Daten durch Klick auf den nachfolgenden Button übersenden, erklären Sie sich damit einverstanden, dass wir Ihr Angaben für die Beantwortung Ihrer Anfrage verwenden. Selbstverständlich werden Ihre Daten vertraulich behandelt und nicht an Dritte weitergegeben. Sie können der Verwendung Ihrer Daten jederzeit widersprechen. Das Datenhandling bei Sack Fachmedien erklären wir Ihnen in unserer Datenschutzerklärung.