Sonstiges, Englisch, Band Volumes 702-703, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Materials Science Forum
Sonstiges, Englisch, Band Volumes 702-703, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Materials Science Forum
ISBN: 978-3-03795-119-4
Verlag: Trans Tech Publications
The proceedings are broadly divided into six sections; the first being a collection of keynote lectures, followed by papers classified under Deformation, Deformation and Annealing, Techniques, Annealing and Materials.
Volume is indexed by Thomson Reuters CPCI-S (WoS).
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
The Cube Texture RevisitedHigh Resolution EBSD-Based Dislocation MicroscopyTextures in Industrial Processes and ProductsAn Efficient Strategy to Take Texture-Induced Anisotropy Point-by-Point into Account during FE Simulations of Metal Forming ProcessesPrecipitation and Texture Formation in Interstitial Free High Strength (IFHS) Steels: A Short ReviewTexture Development during Friction Stir Welding of Magnesium AlloysDeep Drawing of ZK60 Wrought Magnesium AlloysDeformation Temperature Effects on Microstructure and Texture Evolution in High Strain Rate Extrusion-Machining of Mg-AZ31BCharacteristics of Microstructure and Texture in the Stir Zone of Friction Stir Welded Al-12.7Si-0.7Mg AlloyEffects of a High Magnetic Field on Austenite Decomposition in High Purity Fe-1.1C (wt.%) AlloyDirectional Anisotropy in the Mechanical Behavior of Friction Stir Processed and Aged AZ91 AlloyTexture Control of Aluminum and Magnesium Alloys by the Symmetric/Asymmetric Combination Rolling ProcessEffect of Rolling Temperature on the Evolution of Microstructure, Texture, and Mechanical Properties of AZ31 Mg AlloyApplication of Visco-Plastic Self Consistent Approach to Model Deformation Characteristics of Magnesium with Different TexturesMicrostructure and Texture Evolution during Hot Rolling of Mg-9Li-7Al-1Sn Alloy for Aerospace ApplicationDevelopment of Microstructure and Texture in Al5052 Alloy Processed at Room and Cryogenic Temperatures in an ECAP DieMicrostructure Evolution and Mechanical Behaviour of Severe Plastically Deformed CuEvolution of Microstructure and Crystallographic Texture in AA2014 Aluminium Alloy during Equal Channel Angular ExtrusionOn the Bumps and Curves in the Microband Boundaries in a Channel-Die Compressed Goss-Oriented Ni Single CrystalDeformation Induced Percolating Porosity In High Pressure Torsioned (HPT) CopperMetallographic Studies on Deformation Microstructures of ECAE Processed AA 2014 Aluminium AlloyThe Role of Processing Routes on the Evolution of Microstructure and Texture Heterogeneity during ECAP of Al-Cu AlloyThe Role of Structure and Texture Factors in the Ductility and Deformability Improving of Magnesium Alloys Subjected to ECAPTexture Evolution of IF-Steel Sheets Processed by Equal-Channel Angular Sheet Extrusion (ECASE)Microstructural Investigation of Co-Rolled Nanocrystalline Stainless Steel SheetsTexture, Grain Boundaries, Defects and Location of Substitutional Atoms in Cryo-Mechanically Processed Ti-5Ta-1.8Nb AlloyGrain Refinement Mechanisms Oterative during Equal Channel Angular Pressing of AluminiumInteractive Effects of Strain, Strain-Rate and Temperatures on Microstructure Evolution in High Rate Severe Plastic DeformationMicrostructure Refinement During Severe Plastic Deformation (SPD) of FCC Materials: A Texture Based StudyInvestigation of Microstructure of the Commercial Pure Aluminium in the ARB ProcessMechanical Anisotropy of Aluminium Laminates Produced by ARBUltrafine Grained Microstructure in Al-Cu-Si Alloy Obtained by Accumulative Roll Bonding ProcessCrystallography of the Low Angle Lamellar Band Boundaries in ARB- Processed Aluminum SheetAn Investigation of Microtexture Evolution in an AlMgSi Alloy Processed by High-Pressure TorsionTexture Evolution of HPT-Processed Ni50Mn29Ga21Texture Evolution in ARB Processed Commercial Purity AluminiumTexture Evolution of Armco Iron during Accumulative Roll Bonding ProcessPrediction of the Plastic Anisotropy of Rolled Sheets under a Combined Effect of Texture, Grain Shape and Grain SizeOn the Orientation of Cell Block Boundaries in the Grains of a Rolled F.C.C. PolycrystalA Rate-Independent 'Stack' Model of a Polycrystalline AggregateModeling of Deformation Microstructure - Strain Hardening and Crystallographic Reorientation of Crystallites in a Columnar PolycrystalMicrostructural Modeling of Banding in Single Crystals: 'Stack of Domains' ModelCrystal Plasticity Predictions of Forward-Reverse Simple Shear Flow StressSome Comments on Lattice Rotation in Aspect of Brass-Copper Texture TransitionThe Brass-Type Texture ? How close Are we to Understand it?Microstructural and Crystallographic Aspects of Yield Surface EvolutionNew Model for Twin-Variant Selection in Hexagonal AlloysValidation of the Texture-Based ALAMEL and VPSC Models by Measured Anisotropy of Plastic YieldingCharacterization and Modeling of Twinning in a Titanium Alloy Ti-6Al-4VRolling Texture Transition in FCC Metals Using the Viscoplastic F-Model and Considering Mechanical TwinningOn the Use of EBSD to Study the Heterogeneity of Plastic DeformationClassification of Textures and Microstructure Stability in Rolled F.C.C. Metals with Grain InteractionsTracking the In-Grain Orientation Spreads in Hot-Deformed Polycrystalline Aluminium: Experiment and Finite Element SimulationOn the Role of Local Grain Interactions on Twin Nucleation and Texture Evolution in Hexagonal MaterialsGrain Orientation Spread Values in if Steels after Plastic Deformation and RecrystallizationThe Effect of through-Thickness Texture Inhomogeneity on Roping Behavior in AA6111 Al-Si-Mg AlloyThermal and Mechanical Stability of the Single Component Rotated Brass Texture in a 7010 Aluminum AlloyTexture Evidences of Interaction between Plastic Deformation and Phase Transformations in Zr-Based AlloysFormability Changes of Asymmetrically Rolled AA 3003 Al Alloy SheetsDeformation Behavior of Electro-Deposited Pure Iron with Extremely High R-ValueEvolution of Textures during Cold Rolling of W-26Ni-26Fe-13Co and W-28Ni-12Fe-10Co AlloysEffect of Texture on the Mechanical Properties and Ballistic Performance of an Extruded Al-6063 RodMechanical Property Anisotropy of 7010 Aluminum Alloy Sheet Having Single Rotated-Brass TextureFatigue Failure, Residual Stress and Misorientation - A Possible CorrelationEffects of Grain Orientations on Nanoindentation Behavior in Hexagonal ZirconiumEvolution of Crystallographic Texture in Cold Rolled Al-Zn-Mg Alloys Used in Space ApplicationsUltra-Fine Grained Al-SiC Metal Matrix Composite by Rotary Swaging ProcessNucleation of Recrystallization in Fine Grained AA3104 Alloy Analyzed by SEM and TEM Orientation MappingsMechanical Property Anisotropy of a (CPH) and a? (Orthorhombic) Phases in Binary Ti-Nb AlloysTexture Changes of Asymmetrically Rolled AA 1050 Al Alloy SheetsFormation Process of {001} Texture in Al-Cu Solid Solution during High Temperature Compression DeformationFormation Process of Texture in AZ80 Alloy during High Temperature Plane Strain Compression DeformationGradient Microstructure of FeCr30Co8 Hard Magnetic Alloy Subjected to Plastic Deformation by Complex LoadingInfluence of Friction Stir Processing Parameters on Anisotropic Behavior Property of 5086-O Aluminum AlloyMicrostructure and Texture Evolution of a Cold Rolled Ni-Cr-W Alloy after AnnealingTexture and Correlation between R-Value and Formability of Aluminum Alloy SheetTexture Analysis for Determining the Rate Controlling Process in the Transient and Steady State Regions of Superplastic FlowKey Microstructural Changes during High Strain Rate Superplastic Deformaion of an Al-Zn-Mg-Cu-Zr Alloy Containing ScRole of Texture in Understanding Creep Flow in HPT-Processed Ultrafine Grained CopperMicrostructural Evolution During Superplastic Forming of Al-Li 8090 AlloyTexture Studies of Superplastically Deformed Electrodeposited Nanocrystalline Ni and Ni-P AlloyNew Insights into Cube Nuclei in Deformed AluminiumFormation and Development of Strong Cube Recrystallization Texture in an Aluminium of Commercial PurityEffects of Initial Parameters on the Development of Cube Texture during Recrystallization of CopperStability of Cube Oriented Grains during Cold-Rolling of Highly Cube-Oriented Polycrystalline NickelEffect of Ultrahigh Straining on the Evolution of Cube Texture ({100}) in High Purity NickelObservations on the Effect of a High Magnetic Field Annealing on the Recrystallized Microstructure and Texture Evolution in Pure CopperPractical Aspects of Texture Analysis in the Aluminum IndustryYield Strength Anisotropy of Steel Sheet Induced by Grain Shape and Crystal AnisotropyOn the Impact of Thermo-Mechanical Processing on Texture and the Resultant Anisotropy of Aluminium SheetTexture Evolution and Softening Processes in an Austenitic Ni-30Fe Alloy Subjected to Hot Deformation and Subsequent AnnealingEffect of Hot-Deformation on Micro-Texture in Ultra-Fine Grained HSLA SteelRecrystallization Kinetics and Texture Evolution during Annealing of Fe-23.2Mn-0.57C AlloyTexture Evolution in Thermomechanically Control Processed Multiphase Medium Carbon Microalloyed Steel: Forged, Rolled and Low Cycle Fatigued MicrostructuresTexture and Microstructure of WE54 Alloy after Hot Rolling and AnnealingTexture Evolution in Titanium and Aluminum Sheets Subjected to Friction Roll Surface Processing and Subsequent AnnealingComparison of Gradients in Orientation and Stress between Experiment and SimulationThe Application of 3D-EBSD for Investigating Texture Development in Metals and AlloysAdvanced Methods and Tools for Reconstruction and Analysis of Grain Boundaries from 3D-EBSD Data SetsDislocation Densities, Slip-System Types and Burgers Vector Populationsinhexagonal and Cubiccrystalsfrom X-Ray Line Profile AnalysisEvaluation of Geometrically Necessary Dislocations Density (GNDD) near Phase Boundaries in Dual Phase Steels by Means of EBSDEstimation of the Full Nye Tensor by EBSD-Based Dislocation MicroscopyObservations of Dislocation Structure in AA 7050 by EBSDInvestigation of Texture Gradients of Semi-Finished Products by Neutrons and PhotonsRecent Advances in Texture Measurement Using Two-Dimensional Detector
In-Situ Texture Measurements by Synchrotron Radiation of TRIP Steel during an Austempering TreatmentQuantifying Damage Accumulation Using State-of-the-Art FFT MethodGeneralized Pole Figures and Stored Energy Distribution Function Obtained by X-Ray DiffractionStudy of Deformation Twinning and Planar Slip in a TWIP Steel by Electron Channeling Contrast Imaging in a SEMEBSD-Based Crystallographic Study on a Ni-Mn-Ga Alloy with Incommensurate 7M StructureHigh Resolution Orientation Distribution FunctionVirtual 3D Microstructures with Specified Characteristics of State Variable DistributionsCommon Region between Euler Subspace and Rodrigues Fundamental Zone for a Cubic Crystal and Orthotropy Sample SymmetryAngular Precision of Automated Electron Backscatter Diffraction MeasurementsIntelligent Microscopy for EBSD ApplicationsStudy of the True Nature of Microband Boundaries in Aluminum with 3D EBSDLocal Strain Calculations Using Electron Backscattered Diffraction (EBSD) Measurements and Digital Image ProcessingImproving the Reliability of EBSD-Based Texture Analysis by a New Large Area Mapping TechniqueCharacterization of Coatings by SEM Based MicrodiffractionTexture and Microstructure Evolution in Friction Stir Welded Cu-Al Sheets Characterized by EBSDMetallographic Preparation for Electron Backscattered DiffractionAbnormal Growth Mechanisms of Goss Grains in Grain-Oriented Electrical SteelsThe Effect of Cold Rolling Direction on the Secondary Recrystallization in Fe-3%Si SteelTexture and Microstructure Evolution during Box Annealing of a Non-Oriented-Grain Electrical SteelModeling of the Particles Pinning Effect on Grain GrowthExperimental Investigation of Texture Gradients in Aluminium/Copper Plates Bonded through Explosive Welding ProcessFacilitated Recrystalization of the Hard-to-Recrystalize Structure in 16% Cr Steel Sheets by one-Pass ECAP Prior to Cold RollingRecrystallization Textures in Aluminum Alloys: Experimental Study and ModellingCellular Automata Simulation of Textural Evolution during Primary Static Recrystallization of IF SteelInfluence of Nb-Ti Composition on Recrystallization of Ferritic Stainless SteelRecrystallization Behavior Immediately after Hot-Rolling in Ferrite Region in Ultra Low Carbon Sheet SteelsProgress of Recrystallisation in Cold Rolled Austenitic Stainless Steel during Cyclic Thermal ProcessStudy on Recrystallization Behavior of Nb-1Zr-0.1C AlloyGrain Boundary Migration and Grain Growth Texture Evolution in Zn in a High Magnetic FieldVertex Dynamics Simulations of Orientation Dependent Recovery in Deformed Aluminium Single CrystalsAn EBSD Study of Texture Variation along Pilger Reduced Titanium Alloy TubesTexture Evolution during Recrystallisation of Cold Rolled TWIP SteelInfluence of Rare Earth Addition on Texture Development during Static Recrystallization and Mechanical Behaviour of Magnesium Alloy SheetsCompromising Effect on Development of Recrystallization Texture in Aluminium Sheet ? A 2D MC Type Simulation ?Study of the Microstructure, Texture and Tensile Properties in as-Extruded AZ91 and ZM21 Magnesium AlloysModelling Static Recrystallisation Textures Using a Coupled Crystal Plasticity-Phase Field TechniqueStudy of Micro-Texture during Recovery and Recrystallisation in Folded BCC and FCC Sheet SamplesCombined EBSD and AFM Study of the Corrosion Behaviour of ETP-CuStudy on Sensitization Susceptibility and Texture of Cold Rolled AISI 304LN Stainless SteelNon-Uniform Strain Hardening of Crystallites within Different Regions of Texture Maxima: Evidences and MechanismsIGSCC of Non-Sensitised Austenitic Stainless Steels in BWR Environment ? Effect of Deformation Mode on Grain Boundary SusceptibilityElectrochemical Characterization of Low Temperature Thermal Aging Embrittlement of Stainless Steel 304L WeldEnd Grain Corrosion: Establishing Microstructural Causes and Preventive StepsStatistical Analysis of Grain Boundaries in the Space of Macroscopic Boundary ParametersImportance of Microscale Texture and Grain Boundary Connectivity to Percolation-Dependent Bulk Properties in Polycrystalline MaterialsEvolution of Grain Boundary Texture in Zirconium AlloysOrigin and Role of S3 Boundaries during Thermo-Mechanical Processing of a Ti-Modified Austenitic Stainless SteelElemental Distribution Characteristics Across ?-TiAl:TiAlV Diffusion Bond InterfaceRecrystallization Textures of Cross-Rolled 3.3% Si Electrical Steel and 99.99% Copper SheetsCorrelation between Texture at Primary Recrystallized State and Magnetic Properties in Grain Oriented Electrical SteelsEffect of Mn on Texture Evolution in Fe-Si-Mn AlloysModeling the Magnetic Properties of Non-Oriented Electrical Steels Based on Microstructural ParametersGrrain Orientations and their Influence on Precipitation in Hot Compressed Columnar Grains in Electrical SteelStrong Goss Texture in Recrystallized Fe81Ga19 SheetEffect of Cold Rolling Reduction Rate on Secondary Recrystallized Texture in 3%Si-FeEffect of Uni-Axial Tensile Deformation on Microstructure and Magnetic Properties of 3.2% Si Grain Oriented Electrical SteelOrientation Evolutions During Hot Rolling of Electrical Steel Containing Initial Columnar GrainsTexture Evolution during Asymmetrical Warm Rolling and Subsequent Annealing of Electrical SteelThrough-Thickness Shear Strain in Silicon Steel under Asymmetric RollingEffect of Grain Size and Meso-Texture on the Impact Toughness of Ti-Microalloyed SteelCrystallographic Texture as a Factor Enabling Ductile Fracture Arrest in High Strength Pipeline SteelMicrostructure and Texture Evolution in Interstitial-Free (IF) Steel Processed by Multi-Axial ForgingTexture Evolution during Cold Rolling and Annealing in Dual Phase SteelsStrain Localizations in Ultra Low Carbon SteelImprovement of Crystallographic Texture of High Strength Interstitial Free Steels by the Control of Steel Chemistry and Coiling TemperatureRecrystallization Texture of Ferrite Steels: Beyond the ?-FibreAnnealing Behaviour of Ferritic HT-9 SteelTexture Formation in High Strength Low Alloy Steel Reheated with Ultrafast Heating RatesMicrostructure Evolution in Deformed Ultrahigh Carbon Low Alloy (Wootz) SteelStudy of Texture in Ultra Fine Grained Dual Phase Steel SheetsTexture Development in Ferritic Steels during High Temperature Uniaxial Compression DeformationOrientation Relationships of Coarse Pearlite Islands Formed in Tundish Well Clogging DepositsStudy of Recrystallization and Phase Transformation in a Cold-Rolled Dual-Phase Steel: Influence of Temperature and Heating Rate during First Annealing StagesEffects of Grain Size and Texture on the Biocompatibility of Commercially Pure TitaniumDeformation Behaviour of Titanium in TorsionTexture and Microstructure Development during Swaging and Annealing Process of Fabrication of Zircaloy-4 Rod ProductsInfluence of Temperature upon the Texture Evolution and Mechanical Behaviour of Zircaloy-4Plastic Deformation of Textured Zircaloy 2Texture Formation in a-Zr of Zr-1%Nb Alloy under Radial ForgingCurrent Approaches for Reconstructing the Parent Microtexture from that Inherited by Phase TransformationVariant Selection and Texture in an AISI 301LN Stainless Steel
In Situ Observation on the Influence of ? Grain Growth on Texture Evolution during Phase Transformation in Ti-6A-4VNanocrystallization and Texture Transformation in the Surface Layer of Copper Induced by Surface Mechanical AttritionDetermination of the Orientation Relation from Variants Inherited by Phase TransformationDetermination of Crystallographic Elements (Dislocation and Surface Plane) from Automated TEM Orientation DeterminationEvolution of Hot Rolling and Phase Transformation Textures in an a? (Orthorhombic) Phase in Ti-Nb AlloysEvolution of Texture during Directional Solidification of Giant Magnetostrictive Tb0.3Dy0.7Fe1.95 AlloyRestitution of Prior-Austenite Grain Orientation by Microtexture Analysis of Tempered Martensite Structure in 9Cr-1Mo Ferritic SteelTextural Evolution Evaluated by EBSD and XRD after Thermal Treatment in Ni-Ti Shape Memory AlloyMicrostructural Irreversibilities under Thermal Cycling in Ni-Ti-Fe Shape Memory AlloysEvolution of Texture and Microstructure during Cold Rolling and Annealing of Fe-14Mn-6Si-9Cr-5Ni Shape Memory AlloyDeformation Induced Phase Seperation of Ni45Co5 Mn36.7In13.3 Alloy at High TemperatureVariants of Texture Formation by Rolling of Ti-Ni Single Crystals with Shape Memory PropertiesTEM Studies on the Microstructural Changes during Thermo-Mechanical Cycling of NiTi Shape Memory Alloy WireTexture Formation in Thin Tapes from Ni-Based Ternary Alloys with Cr, W, Mo and VTexture of Electrodeposited Nanocrystalline Ni-Fe with Banded StructureAn EBSD Study of Gallium Arsenide NanopillarsInvestigation on Texture Evolution in Plastic Deformation Layer of SMAT IronNanometer Scale Microstructure and Microtexture of Biological Materials Revealed by High Spatial Resolution (15 to 5 kV) EBSDInfluence of Additives on Texture Development of Submicro- and Nanocrystalline NickelA Multi-Scale Modeling Approach to Simulate Intergranular Crack Propagation in Textured Polycrystalline MaterialsDevelopment of Continuously Cooled High Strength Bainitic Steel through Microstructural Engineering at Tata SteelTexture Evolution along the Layer Thickness in a Fe-3%Si Steel under Electropulsing TreatmentEffect of Environment on the Surface Modification by Pulse Laser Irradiation of Al-Si/SiCP MMCsFavorable Effect of Ho Addition on the Microstructure and Magnetostriction of Textured Tb0.3Dy0.7Fe1.95Mesoscopic EBSD Analysis and Mesomechanical Behavior of Ridging or Roping in AA6XXX AlloysMicrostructural Analysis of Type 304 Metal SleeveProcess Parameter Impact on Microstructure of Laser Clad Inconel-Chromium Carbide LayersStructure-Property Correlations in Cathodic Arc Deposited TiAlN CoatingsThe Redistribution and Alignment of Crystalline Flakes in a Bulk Metallic Glass Composite during Thermoplastic FormingUltrasonic Processing and Microstructural Analysis of AZ91 Magnesium AlloyEffect of Modes of Rolling on Mechanical Properties, Texture and Ballistic Performance of Al-7017 AlloyEffect of Modes of Rolling on Evolution of Texture and Yield Locus Anisotropy in a Multifunctional Ti-31Ta-12Nb-2V-8Zr-0.22O AlloyEffect of Roll Diameter and Modes of Rolling on Evolution of Texture in High Purity AluminumA Cross-Sectional TEM Study of Abrasive Water Jet Cut SurfaceFerroelastic Domains and Anisotropy in Lead Free PiezoelectricsEpitaxial Growth of a-Fe2O3 Thin Films on c-Plane Sapphire Substrate by Hydrothermal MethodA Stochastic Optimization for the Optimal Texture of Ferroelectrics for Piezoelectric ApplicationsTextured Multiferroics: 2-D Diffraction and Properties PredictionMicrostructural Characterization of Ferroelectric Bismuth Ferrite (BiFeO3) Ceramic by Electron Backscattered DiffractionStudy of Microstructures in Single Crystalline Chemical Vapor Deposited Diamond Thin Films
