Sonstiges, Englisch, Band Volumes 455-456, 1722 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Advanced Materials Research
Sonstiges, Englisch, Band Volumes 455-456, 1722 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Advanced Materials Research
ISBN: 978-3-03795-125-5
Verlag: Trans Tech Publications
These 278 peer-reviewed papers selected from the SSITE International Conference on Future Material Research and Industry Application (FMRIA 2011), held on December 1-2, 2011, in Macau (China), are grouped into the chapters: industrial engineering and materials science, applied chemical engineering, mechanical engineering and computer science, biomaterials science and environmental engineering, applied mechanics and structural engineering. The work is an excellent guide to the current state-of-the art of these subjects.
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Research on Melting and Solidification Process of Phase Change Storage Energy MaterialsInvestigation into Hardness and Young?s Modulus of Thin Films of Lead Germanium TellurideEfficient Synthesis, Properties of a Novel Unsymmetrical Photochromic Diarylethene Based on Benzothiophene and Thienyl GroupSynthesis, Photochromism and Fluorescence of a Novel Diarylethene Having Thiazole UnitSynthesis and Property of a New Photochromic Diarylethene Bearing both an Isoxazole Unit and a Methoxy GroupSynthesis, Properties and Application in Optical Memory of a New Photochromic Diarylethene Based on a Chlorine AtomSynthesis, Photochromism and Optical Recording of a New DiaryletheneEfficient Synthesis and Photochromic Properties of a New Diarylethene Bearing a Condensed Aromatics MoietyEfficient Synthesis of a New Unsymmetrical Photochromic Diarylethene for Optical Recording StorageSynthesis, Properties and Application in Optical Memory of a Photochromic Diarylethene Bearing Pyridine UnitModes Excitation by Input Field of Different Positions in Three-Mode Photonic Crystal WaveguidesFabrication of Nano-Al2O3/Ni Composite Particle with Core-Shell Structure by a Modified Electroless Plating ProcessFeasible Study of Fire-Resisting Wood Material in Habitability Design of Large Surface VesselsStudy on Mechanism of Molybdenum Concentrate RoastingImpact of Immersion Depth of Ultrasonic Horn on Acoustic Field Distribution Using Thermoelectric ProbeA Research on Separation Mechanism of Cylindrical HydrocycloneNumerical Simulation of Heat and Mass Transfer of Lump Coal Falling in the Freeboard Zone of COREX Melter-GasifierPreparation and Characterization of Cuprous Chloride Catalyst for Direct Synthesis of TriethoxysilaneFabrication of Lignin-Wrapped Carbon Nanotubes and its Dispersion in ABS ResinEffect of Siderite on Reverse Flotation of Dong Anshan Iron Ore Containing CarbonatesEnhancement of Absorption of Injected Gas in New Type Mechanical Stirring Injection Refine EquipmentSome Theoretical Problems Analysis of Melting High Nitrogen Stainless SteelsSynthesis, Characterization and Photocatalytic Activity of Nb-Doped TiO2 NanoparticlesPreparation and Surface Modification of Fe3O4@Sio2 Composite MicrospheresA Numerical Study on the Temperature Field of Oscillatory Flow Reactor with Conic Ring BafflesA Novel Process Employing Dividing Wall Column and Double Effect DistillationEffects of NaF on Mould Flux Properties for Thin Slab Continuous CastingPerformance of a Solar Drying System Driven by a Hybrid Power SystemStudy on the Strategy for Failure Diagnosis of Wall-Flow DPF Based on Pressure Drop CharacteristicsMolecular Dynamics Simulations of Coupling between Flow and Heat Transfer in a NanochannelFrequency and Pressure Characteristics of a Helmholtz-Type Valveless Self-Excited Pulse CombustorResearch on Permeability of Coal Samples with and without the Effect of Supercritical CO2The Function of Sba-15 over Ni/Mo2C Catalysts for Carbon Dioxide Reforming of MethaneFatigue Simulation and Analysis on Planetary Gear of Megawatt Wind Power Yaw ReducerContact Simulation and Analysis on Planetary Gear of Megawatt Wind Turbines Yawing ReducerOptimal Design Research of Post-Processing Technology Based on Settlement ControlTwo-Stage Optimal Design of Small Pile Composite Foundation Based on Consolidation Degree and Bearing Capacity ControlApplication of Lodrigues Matrix in Coordinate Transformation of Similar Material Simulation ExperimentADRC Applied in Micro Grid of Wind Turbine with FlywheelTest System for Mechanical Property of Geotextile Material Based on PCI-1714Castor Capsule Sheller Key Component Design and Experimental ResearchCFD Simulation of Spraying with Air JetStudy on Whole Life Cycle Management of Cutting ToolThe Experimental Investigation and Theoretical Analysis on Transcritical Carbon Dioxide Heat Pump CycleThe Internal Resistance Characteristics of Lithium-Ion Battery Based on HPPC MethodThermodynamic Analysis of Solar Driven Vuilleumier Cycle Heat PumpFormulation of a New Type of Electrolytes for LiNi1/3Co1/3Mn1/3O2 Cathodes Working in an Ultra-Low Temperature RangePreparation and Properties of Zno/Vermiculite Composite ParticlesKinetic Characteristic of the Dust Particles around the InsulatorsNumerical Simulation for Heat Storage Study of the Microencapsulated Phase Change Material Slurry in a Horizontal Rectangular EnclosureThe Energy-Saving Optimization of the Organic Heat Transfer Material HeaterThe Quenching Characteristics of Gas Deflagration Flame in Narrow ChannelNumerical Study of Performances of Vertical Axis Tidal TurbinesThe Speed Coefficient Method Based Nuclear Main Pump Design and CFD AnalysisMechanical Properties of Forged Ti-6Al-4V Structure by Electron Beam WeldingNumerical Simulation of the Nuclear Main Pump in the SblocaResearch on Effects of Diameter and Arrangement of Nozzles on Combustion and Emissions in CylinderInvestigation of Shapes and Extinction Limits of Premixed Flames in Large Centrifugal Acceleration FieldNumerical Simulation on Small Scale Straight-Blade and Twisted-Blade Vertical Axis Wind TurbineEffects of Fuel Octane Number on Homogeneous Charge Compression Ignition (HCCI) Combustion with Rapid Compression MachineComputation of Turbulent Flows in Natural Gas Pipes with Different RectifiersEffects of Difference Leading Edge Shapes on Numerical Simulation of Centrifugal CompressorNumerical Simulation of Flow and Heat Transfer Characteristics in Rectangular Channel with Novel Longitudinal Vortex GeneratorsNew Shape-Controlled Nanocrystalline SrSiO3 Photocatalyst: Template-Free Syntheses and Photocatalytic ActivityStudy on Effect of Hydrogen Environment on Stress Corrosion Cracking of Retaining Ring in Hydrogen-Cooled GeneratorNumerical Calculation and Simulation on Melting and Solidification Time Periods of a Phase Change MaterialResearch on Mechanism of Sodium Silicate on Gas Quenching Steel Slag CementAerodynamic Optimization Design of a Turbocharger Compressor ImpellerVibration Characteristics Analysis of Tubing String in Three-High Gas WellMechanism Analysis of Jet Drilling Rock by Numerical Simulation and ExperimentPrediction of Hardness in Heat Affected Zone of 9%Ni SteelDiffusion Combustion Characteristics of H2/Air in the Micro Porous Media CombustorDifferent Solar Cell Performance under the Concentrator ConditionsInfluence of Chemical Modification of Activated Carbon Surface on Performance of SupercapacitorsModeling the Glass Transition Temperature of Polymers via Multipole Moments Using Support Vector RegressionPrediction of Glass Transition Temperature of Polymer by Support Vector RegressionExpression of Anthocyanin Biosynthetic Genes during Fruit Development in ?Fengxiang? StrawberryStudy on the Isolation of High-Quality DNA and RNA from AloeAntibacterial Activities of Antibacterial Proteins/Peptides Isolated from Organs and Mucus of Clarias Gariepinus Reared at High Stocking DensityStudy on Properties of Corn Starch-Based Fat MimicsResearch of Monitoring Deterioration of Milk by Using Surface Tension Coefficient and ViscosityScreening of a L-Lactic Acid Producing Strain of Lactobacillus Casei by Low-Energy Ion ImplantationThe Research for the Extraction of Yeast?S Nucleic Acid with [BMIM] BF4-H2O-KH2PO4 Ionic Liquid Aqueous Two-Phase SystemComparison of Non-Covalent Interactions between a Series of N-Phosphoryl Dipeptide or Methyl Esters and Cytochrome C by Electrospray Ionization Mass SpectrometryAllelopathic Potential and Chemical Components of Aqueous Extract from Soil-Like SubstratePurification and Fractionation of Natural Petroleum Sulfonates by Liquid-Liquid & Soxhlet ExtractionExperimental Study of Purifying Precipitated Silica Produced from Yellow Phosphorus SlagElectrochemical Degradation Pathway of Phenol on Ti/SnO2 AnodeStudy on Mechanical Properties of Nanocompo-Sites Prepared Using Elastomeric Copolymers and Nano-SiO2Electrical Conducting Properties of Unsaturated Polyester/Graphite Nanosheet Composite under Electric FieldStructure Characterization of Unsaturated Polyester/Graphite Nanosheet Composite under Electric FieldStructure Characterization of Polymer/Oriented Graphite Nanosheet Composite by Electric Field-InducementMolar Kinetics in Catalytic Hydrocracking of AsphaltenesKinetics and Selectivity of Cyclohexane PyrolysisSynthesis and Characterizations of Monodispersed Nanotriangle of GoldElectrical Treeing Breakdown Properties for Polyimide Nanocomposite Film in Inverter-Fed MotorsAn Amphiphilic Acrylic Copolymer/Montmorillonite NanocompositeSynthesis and Fluorescence Properties of Pyrazole Oxadiazole DerivativesStudy on Modified Starch by Glutaraldehyde and its Properties and ApplicationStudy on Synthesis and Properties of a Starch-Polyacrylamide Graft Copolymer by HRPPreparation and Properties of Modified Starch with Methoxy Polyethylene Glycol MethacrylatePreparation and Properties of Copolymer of Degraded Starch and CA-HPA Initiated by HRP/H2O2/ACACPreparation and Properties of Polycarboxylate Superplasticizer with Hydroxy Terminated Side ChainsSynthesis of Polycarboxylate Superplasticizer with ?-Cyclodextrins as Side ChainSynthesis and Properties of Copolymer of Gallic Acid and Sulfamic Acid Catalyzing by HRP/ H2O2Study of Reactive Precipitation in Vortex Impinging Streams ReactorThe Synthesized Principle and Property of Several Extraction Agents for GermaniumEnergy-Saving Characteristics of Benzene-Toluene Mixtures in Heat Pump Distillation ColumnSynthesis of L-Azetidine-2-Carboxylic AcidStudy on the Precipitation Polymerization of Acrylamide and Methacrylic Acid in Ethanol by Conductimetry: Phase- Separation Prior to PolymerizationEffects of ZrO2 Fiber on the Mechanical Properties of Nano-ZrO2/Al2O3 Ceramic CompositePreparation of ZrO2 Composite Ceramics with High Thermal Shock ResistanceEfficient Synthesis of Thieno [2,3-d] Pyrimidin-4(4H)-ones by the Aza-Wittig MethodologyPurification of Polyether Polyols Made by Double Metal Cyanide CatalysisA Study of Predominated Pathway of Initial Processes in Chemical Vapor Deposition of Silicon-Carbide from Methyltrichlorosilane and Hydrogen SystemSynthesis and Luminescence Properties of Three Europium Complexes with Phenanthroline Derivatives and ?-DiketonatesAdsorption Properties of Dye onto Mg/Al-CO3 Layered Double HydroxideInfluence of Photoinitiator Sensitometric Characteristic on Light-Thermal Sensitive Microcapsule MaterialsAdsorption Behaviour of PEGylated Gold Nanoparticles to Different Surfaces Probed by CV MonitoringBrilliant Blue-Functionalized Reduced Graphene Oxide with Excellent Stability and Solubility in WaterTm3+/Yb3+ Codoped YAG Glass-Ceramic Formed in Silicate Glass SystemComposition of Hydrogenated Vacuum Gas Oil Analysis by Gas Chromatography Mass SpectrometryRapid Fabrication of ZnS Thin Film and Microsphere by Microwave-Assisted Chemical Solution MethodUse Differential Pulse Voltammetry for Determining the 2,6-Ditertbutyl-4-Methylphenol in Jet FuelsUltrasound Changes Solid-Liquid Leaching Equilibrium of Glycyrrhizic Acid from Glycyrrhiza Uralensis in WaterPreparation and Electrochemical Investigation of LiCoPO4 Cathode Material for Lithium Ion BatteriesThree-Dimensional Open-Framework Zinc Phosphite: Synthesis and CharacterizationTwo-Dimensional Neutral Framework Generated from Mixed Organic Ligands: Structure and Magnetic PropertiesSolvent-Free Synthesis and Characterization of the Zn(II) Complexes with Amino Acid Schiff BaseSynthesis, Crystal Structure and Fluorescence Spectrum Studies of Bromocoumarin Derivants: C10H5Br3O and C12H9BrO4Study on Extraction of Shikimic Acid from Pine Needles of Pinus Elliottii Engelm by Means of Microwave PretreatmentAging Behavior of Polyaspartic Polyurea under Salt-Fog Exposure Studied by Electrochemical Impedance SpectroscopyStudies on Surface Preparation Systems for Polyurea Protective Coating of Beijing-Shanghai High Speed Railway Bridge Concrete BeamsThermal Stress Influence on Adhesion of Polyurea Protective Coating Base on Substrate Processing System in High-Speed RailwayStudies the Properties of Polyaspartic Polyurea Coated Concrete under Coaction of Salt Fog and Freeze-ThawPreparation and Investigation on the Adsorption Behavior of Polyethylene Glycol Modified Sodium Alginate Porous Membrane Adsorbent for Cr(III) IonsEffect of Support on the Hydrogenation of Ethyl Lactate over Ruthenium CatalystsConductomery Properties of Mixed Reverse Micelles with Amphiphilic Ionic LiquidsCharacterization and Thermal Degradation of Polyimide Derived from 5-amino-2(p-aminophenyl) Benzoxazole Monomer with Pyromellitic DianhydrideThe Experiment Study on the Void Fraction in PPG SolutionStudy on Thermodynamics of MgO Based DesulphurizerTunable Morphologies of Co2+-Doped Zno/Znal2O4 Composite Films Derived from Co2+-Substituted Layered Double Hydroxide Single Source PrecursorICP-AES Determination of 11 Kinds of Elements in High Grade Pipeline SteelThe Experimental Study of Fennel Oil Separation and Purification Using Response Surface AnalysisRecycling of Lead and Zinc from Gold and Silver TailingsDegradation of ABS in ABS/CaCO3 Composites during ReprocessingFatty Acid-Starch Complex in the Application of Linerboard Surface TreatmentInfluence of Substrate Load on Polyhydroxyalkanoates (Pha) Accumulation by Unenriched Mixed Cultures from Excess Sludge Fermentation LiquidResearch on Solvent Extraction Process of Coal for Direct Carbon Fuel CellsLiquid-Liquid Equilibrium for (Water + Palm Oil Biodiesel + Methanol) Ternary System at Different TemperaturesMacro Kinetics of N-Phosphonomethyliminodiacetic Acid Catalytic OxidationSyntheses of a Green Organic Phosphorescence Materials and Studies on their Photoluminescent PropertiesFast Microwave Synthesis Lithium Vanadium Phosphate Using Peg as a Novel Carbon SourceResearch on Rechargeable Lithium Manganese Battery Material Electrochemical Roasting Performance AnalysisSynthesis of 1-(4-Antipyrine)-3-(3-Nitroaniline)-Triazene and its Color Reaction with Mercury(II)A pH-Sensitive Poly (2-(Acryloyloxy) Propanoic Acid) Hydrogel and its Drug Release BehaviorsPreparation of Soluble Chitosan by Mechnochemistry ProcessMeasurement and Correlation of Solubility of LiBr in Binary Solvents Formed by Acetone and Water Using LIFAC ModelStudy on the Accurate Determination of Polycyclic Aromatic Hydrocarbons in Coal Tar UtilizationQSPR Studies on n-Octanol/Water Partition Coefficient of Polychlorinated Biphenyls by Using Artificial Neural NetworkQSPR Study on the Soil-Water Partition Coefficient of Polychlorinated Biphenyls by Using Artificial Neural NetworkPreparation and Characrization of Tic/C Composite Fiber by Chemical Vapor DepositionAdsorption of Phthalate Esters from Aqueous Solution by Mg?Al Layered Double HydroxideThermodynamic and Kinetic Study on Lithium Bis(Oxalato)Borate Thermal Decomposition ReactionThe Effect of Na-Ion on the Growth and Hydrogen Generation of Hydrogen-Producing Bacteria Yuan-3Carbon Dioxide Reforming of Methane over Ni/Mo/La2O3-SBA-15 ?atalystApplication of Kaolin Solid Acid Catalyst in the Dethiophene from Coking BenzeneA Study on Nox Reduction of SCR System in Heavy-Duty Diesel Engine to Achieve the Euro V Emission LimitsOptimization of Preparation of Jujube Juice by Response Surface MethodologyRole of the Cathode in a Novel Photo-Electro-Chemical Catalytic ReactorThe Study on Ionic Liquids Oil-in-Water Emulsion Enhancing Carbon Dioxide AbsorptionDesulphurization of High Sulfur Coal by Mild Pyrolysis Combination with Magnetic SeparationNumerical Simulation of Interior Flow Field of Reactor Coolant Pump under Station Blackout AccidentModeling of Thermal Effect of Chemical Reactions in Heap Bioleaching of ChalcopyriteCFD Modeling of the Mixing Process in a Curved Baffles CrystallizerPerformance of Denitrifying Phosphorous Removal Process Employing Nitrite as Electron Acceptor and the Characterization of Dominant Functional PopulationsStudies on the Removal of Humic Acid by Electro-Flotation?Photocatalytic Oxidation of Suspended TiO2Research on Features of Domestic Wastewater Treatment and Mechanism of Denitrification in Anaerobic MBBR ReactorStudy of the Interference between the Diffuser Vanes with the Volute TongueStudies on the Integration of 1.5th and 2nd Generation Fuel Ethanol Production from Sweet Sorghum Stalks: Economic Performance, Energy Consumption and Carbon EmissionsMicrostructural of Cr/MWCNT Composites and its Catalysis in Synthesis of BiodieselSynthesis of Ethyl Acetate Catalyzed by Inorganic SaltThe Study on Building Materials? Optimization Based on Fuzzy TechnologyAn Experimental Study of Fatigue Crack Propagation of 16MnR Pressure Vessel Steel in Mode-I Constant Amplitude LoadingResearch on Shear Bearing Capacity of Reinforced Concrete Short Beam in Salt-Fog EnvironmentCritical Knock Diagnosis for Gasoline Engines Based on Neural Network with Wavelet Transform and Fuzzy ClusteringSimulation-Based Analysis of Articulated Steer Grader with Six Motor-Driven WheelsModel Test and Finite Element Analysis for the Pylon of the Jointed Pylon Cable-Stayed BridgeFuzzy Comprehensive Evaluation of Performance of the Natural Gas Driven Vuilleumier Cycle Heat PumpSubmarine Operation Tool and Intelligent DeviceAnalysis of Vehicle?s Kinetic Characteristic after Tire Blow-OutOptimization of Process Parameters of U-Shape Sheet Metal Based on Compensation of Geometric Springback ValuePunching Teeth Layout on Steel Belt of the Box Based on Optimized Simulated Annealing AlgorithmAdaptive Control of Synchromesh Shifting Process for Automated Manual TransmissionModeling Heat and Moisture Transfer within Porous Textiles under High Temperature GradientsResearch on Defining Regional Boundary of the COREX Melter Gasifier by Using Image ProcessingEffect of Complex Agent on Copper Dissolution in Alkaline Slurry for Chemical Mechanical PlanarizationEffect of Colloidal Silica as Abrasive on Low-k Dielectric Materials in Chemical Mechanical PlanarizationCoupled Heat Transfer Simulations of Air-Cooled Turbines with an Algebraic Transition ModelOptimal Design of High Power Linear Permanent Magnet Synchronous Motor for Aircraft LaunchGear Fault Diagnosis with Support Vector MachineStudy on the Inclusion Complex of Rutin/Sulfobutylether-?-CyclodextrinA Improved Method for Study on Biodegradation of Castor Based LubricantsDetermination of Hydrogen Peroxide Residue in Food Using CdS Quantum Dots as Fluorescence ProbesDetermination of Trace Iron in Chinese Herbal Medicine Using CdS Quantum Dots as Fluorescence ProbesPreliminary Evaluation of Antimicrobial and Cytotoxic Activities of Extracts from Actinidia macrospermaImpacts of Uranyl Ion on the Structure and Function of Cytochrome b5 His39Ser MutantSynthesis and Application of a Novel Polymer as an Antimicrobial and Water and Oil Repellent Finishing Agent for CottonSynthesis of Myristyl Sulpho Betaine Type Amphoteric SurfactantInternalization of DMSA-Coated Fe3O4 Magnetic Nanoparticles into Mouse Macrophage CellsTreatment of Waste Phosphoric Acid Containing Metal Ions by ElectrodialysisSeparation of Liquiritin by Two-Dimensional Liquid ChromatographyMathematical Model and Equations of Wash Water Recycling in the Preparation of Layered Double HydroxidesCu (II), Zn (II) Complexes Containing Calix [4] Arene Modified by Salicylaldehyde Acylhydrazone - Synthesis, Properties and ApplicationExergetic Assessment of Biogas Engine-Driven Heat Pump Systems for Using Sewage ResourceBm Lignin Structure and Chemical Compositional Characteristics of SwitchgrassA Novel Application of Combined Bio-Technologies on Chemical Synthesis-Based Pharmaceutical WastewaterComponent Analysis of the Sugar Cane Molasses Stillage SedimentModeling of THMs and HAAs Formation in Distribution System upon ChlorinationReview on Dynamic Membrane Reactor (DMBR) for Municipal and Industrial Wastewater TreatmentThe Progress of Research on Soil Heavy MetalsEffects of N/P Atomic Ratio on the Growth of Alexandrium Tamarense at Various Initial Phosphate ConcentrationsCharacter and Model of Anaerobic Granular Sludge Formation in the Sanitary LandfillEffects of Herbaceous Plants on Hydrodynamic Characters of Runoff Water, and Runoff-Yielding and Sediment-Yielding Processes on Loessial Earth-Road SurfaceSoil Heavy Metal Concentrations and Leaf Accumulation in Four Subtropical Plant Species from South ChinaA Multifunctional Drilling Fluid for Coalbed Methane DrillingComparing the Influence of Two Different Natural Organic Matter Types on Colloid Deposition in Saturated Porous MediumStudy of Device via Combined Filler for Ship Sewage TreatmentImpact of CuO NPs to Alga Microcystis Aeruginosa: Effect of Dissolved Organic MatterPhotodegradation of p-Nitrophenol Catalyzed by ZnO/MWCNTs Composite Catalyst in WaterSulfur Isotope Geochemistry of Sn?Polymetallic Depositsin Dafulou District of Guangxi Province, ChinaGeological Characteristics of the Dafulou Tin?Polymetallic Sulfide Deposits in Guangxi, South ChinaPreparation and Characterization of Nd-Doped Ti/SnO2-Sb2O5 Electro-Catalytic Electrodes Used for Reactive Brilliant Red X-3B Wastewater TreatmentComparison of the Temporal Heterogeneity of Soil Moisture of Different Ecosystems at Red Soil Hillside FieldsOre Genesis of Caixiashan Pb-Zn Deposit in Middle Tianshan, NW ChinaExperimental Research on Contamination Dissolution-Releasing Characteristic of Coal Gangue in Soaking OperationStudy on Treatment and Reuse of Wastewater from Yunnan Huize Pb-Zn Ore FlotationAn Analysis of the Distribution of Arsenic Groundwater in Northern Suburbs of Zhengzhou, ChinaThe Pb-Zn Deposits and Mineralization during Cambrian in Chongqing Area of Yangtze Platform, ChinaDeformation Characteristics and Mechanism of the West Wall of Beiyi Iron Open-Pit Mine in Hainan ProvinceLead Isotope of Sulfide Minerals from Dachang Ore Field of Guangxi (South China): Characteristic and ImplicationImpact of T8 Transgenic Rice Containing an Isopentenyl Transferase Gene on Soil Bacterial BiomassResearch on the Migration Characteristics of Organophosphorus in ClayResearch on Attenuation Effects of Plasma to Electromagnetic Waves and Influences to the Spacecraft CommunicationExperimental Research on Compressive Age Strength of Ceramisite ConcreteStress Relaxation Damage Analysis for High Temperature BoltingStress Relaxation Continuum Damage Constitutive Equations for Relaxation Performance PredictionDynamic Characteristics of High Speed Vehicle Passing over Railway Turnout on BridgeStrategy of Triangulating Surface of the Hollow CylinderComparison Study of Engine MountsDynamic Properties of Engine Main ComponentsAnalysis of Impact of Tire Tread Groove Depth on Hydroplaning Risk LevelParametric and Controllable Shape Model of the Water-Lubricated Rubber Journal BearingDamage Identification of Beam Structures Based on Genetic Algorithm and Sensitivity AnalysisThe Effect of Centrifugal Force and Coriolis Force on Vehicle-Flexible Bridge Vertical VibrationResearch on Design Methods and Aerodynamics Performance of CQU-DTU-B21 AirfoilDesign Method of the Parameters of Tools for Clinching TechnologyModeling and Predicting Tensile Strength of Tungsten Alloy by Using PSO-SVRA Structure Optimization for Hooklift Arm Device Based on the Genetic AlgorithmStudy on a Pneumatic Automatic-Extendable Crash Energy Absorption SystemIntelligent Multi-Objective Optimization for High Strength Sheet Metal Forming Process of Body PartThe Analysis of Factors Affecting Rock Strength of SandstoneStudy on Duration for Perilous Rock to FormViscous Property of ClayThe Viscoelastic-Plastic Displacement Back Analysis of Rock Mass with Non-Stationary ParametersEvaluation of Rock Mass Permeability Based on Geometry Measuring Method in a Gold MineSamarium-Neodymium and Strontium Systematics Applied to Calcite Veins in Dabashan Thrust and Fold Belt in China: Dating and Tracing of the FluidStability Analysis of Perilous Rock in Views of Damage and Fracture MechanicsExtraction of Gravity Anomalies Associated with Gold Mineralization: A Comparison of Singular Value Decomposition and Bi-Dimensional Empirical Mode DecompositionThe Research of Formation Characters and Bit Optimization of Basalt in Niudong Block of Malang SagMechanical Analysis of Construction Process for Shallow Weaking Surrounding Rock Multi-Arch TunnelResearch on Modeling Method for Freezing Tunnel with Fractured Surrounding RockMechanism and Calculation Research on Excavation Deformation of High Layered Dip Rocky SlopeDetermination of Safe Mud Density for Soft Mudstone Formation in KI11-2 StructureStudy and Engineering Practice on Cracks Control Measures for Concrete Face Slab of High CFRDStudy on Effect of the Modified Hollow Microspheres on the Foam Ability and Stability of Fire Fighting FoamCharacteristics of Circulating Fluidized Bed Evaporator with Vapor-Liquid-Solid Three-Phase FlowResearch on Satellite Platform Vibration Compensation Method Based on Liquid Crystal Steering System
