Sonstiges, Englisch, Band Volumes 488-489, 865 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Key Engineering Materials
Sonstiges, Englisch, Band Volumes 488-489, 865 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Key Engineering Materials
ISBN: 978-3-03795-043-2
Verlag: Trans Tech Publications
This collection of peer-reviewed papers covers a wide range of topics: Fracture Mechanics, Failure analysis, corrosion, Creep, Non-linear problems, Dynamic Fracture, Residual Stress, Environmental effects, Crack Propagation, Repair Techniques, Composites, Ceramics, Polymers, Metallic and concrete materials, Probabilistic Aspects, Risk Analysis, Damage Tolerance, Fracture Control, Computer Modelling Methods (Finite Elements, Boundary Elements and Meshless), Microstructural and Multiscale Aspects. The work thus offers a timely survey of these subjects.
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Corrosion-Fatigue of High Strength Steel Bars: Evolution of Crack Aspect RatioLamb-Wave Based Technique for Impact Damage Detection in Composite Stiffened PanelsThe Measurement of Residual Stresses in Thermal Barrier Coated Model AerofoilsDevelopment of Predictive Models for Fatigue Crack Growth in RailsFracture Analysis of a First Stage Turbine Blade by FRANC3DFully Reversed Uniaxial Tension-Compression High Cycle Fatigue Behaviour of Shot-Peened SteelsSolutions for Impact over Aerospace ProtectionThe Effect of Mesh Density in Lattice Models for Concrete with Incorporated MesostructureCalibration of Constitutive Law and Ductile Failure Criterion for Very Thin Rectangular Al2024-T3 Aluminum Alloy SpecimenFlexural Wave Scattering by Double Elliptic Holes in an Infinite Thin PlateAdvanced Finite Element Analysis to Predict Off-Axis Crushing Behaviour of Composite Aero-StructuresFatigue Fracture Mechanism of Extruded Al Alloy 7075-T6 in High HumidityValidation of Modified Lemaitre?s Anisotropic Damage Model with the Cross Die Drawing TestProbabilistic Fracture Resistance of a Forged Quality Medium Carbon Alloy SteelSpatial Statistical Analyses for Time-Dependent Corroded Surfaces of Uncoated Weathering Steel Plates in Various Corrosive EnvironmentsCorrosion Inhibition of Stress Corrosion Cracking and Localized Corrosion of Turbo-Expander and Steam/Gas Turbines MaterialsThe Effect of Lamb Wave Interaction with Fatigue Crack in Thin Al SheetModeling Ductile Fracture Using the Discontinuous Velocity Domain Splitting MethodNotched Specimens Fracture Prediction with an Advanced GTN ModelDynamic Characteristics of Composite Materials Body for Bi-Modal TramComparison between 3D FEM and Standard ISO Tooth Root StressesCrystallographic Analysis of Specimens Used for Calibrate a Failure Model for an Al 6061 ? T6 AlloyCyclic Mixed-Mode Crack Propagation due to Time-Dependent Multiaxial Loading in Jet EnginesCrack Growth Rates and Corrosion Fatigue of Austenitic Stainless Steels in High Chloride SolutionsRolling Contact Fatigue Crack Growth Prediction by the Asperity Point Load MechanismMechanical Characterization of Friction Stir Channels under Internal Pressure and In-Plane BendingNumeric Simulation of Fatigue Crack Growth in a Material Graded StructureLifetime Determination of the Raceway of a Large Three-Row Roller Slewing BearingAnalysis of Combined Adhesive and Cohesive Cracking at Roughened SurfacesPerformance of Different Metal-Foam Stuffed Whipple Shield against Hypervelocity Impact of Space DebrisDevelopment of a Low-Constraint SE(T) Toughness TestModelling of Crack Bifurcation in Laminar Ceramics with Large Compressive StressFinite Element Analysis of Composite Flywheel with Two-Layer Pre-Stressed Rotor StructureIdentification of Slant Cracks in a Cantilever Beam Using Design of Experiment and Neuro-Genetic TechniqueNon-Linear Behaviour of Base-Isolated Building Supported on Flexible Soil under Damaging EarthquakesCoupling Infrared Thermography and Acoustic Emission Measurement to Quantify the Shakedown State of Shape Memory AlloysModeling Fracture of Fiber Reinforced PolymerModeling Radiation Effects on the Fracture Process in Simplified Nuclear GlassCrack Growth Modeling in a Specimen with Polymer WeldBasic Modes of Crack Propagation through the Interface in a Polymer Layered StructureEffect of Notched Parameters on Low Cycle Fatigue Life of Shaft under Bending-Torsional LoadingInvestigation of Eigen-Values for Matrix Cracks of Two MaterialsDimensionless Stress Intensity Factors of an Annular Notched ShaftFatigue Crack Shape Prediction Based on the Stress Singularity ExponentExperimental and Numerical Investigation of Fatigue Behaviour of Nodular Cast IronModelling of Nonlinear Creep and Recovery Behaviour of Cortical BoneFinite Element Analysis by Using Hyper-Elastic Properties for Rubber ComponentAssessment of Thermal Damage for Railway Wheel of Long-Term RunningInfluence of Curing Temperature on the Mechanical Properties of Alkali-Activated Bottom Ash Geopolymer MortarInvestigation into Damage of AL-Mesh Bumper under Hypervelocity AL-Spheres ImpactDynamic Antiplane Behavior for a Quarter Infinite Piezoelectric Medium with a Subsurface Circular InclusionA Study on the Fracture Test in Railroad TruckFracture Behavior and Mechanical Properties of Bamboo Fiber Reinforced ConcreteStudy on Welding Deformations of Shipboard of Container VesselVariational Principle and Buckling Analysis of Functionally Graded Plate with Temperature ChangesThe Scattering of SH-Wave Caused by Subsurface Circular Cavities in a Layered Half-SpaceFatigue Damage in On-Axis and Off-Axis Woven-Fiber/Resin CompositeEffect of Hydrogen on Mechanical Properties of Type 310S Stainless SteelFatigue Strength of Radical Nitrided Spheroidal Graphite Cast IronCombined Influence of Expansive and Shrinkage Reducing Admixtures on the Shrinkage Behavior of Ultra-High Performance ConcreteStudy on Gradient-Dependent Nonlocal Damage Constitutive Models of Concrete under Freeze-Thaw ActionEffect of YbCl3-Zn-Epoxy Coating on MIC Behavior of Low Alloy SteelImprovement of MIC Behavior of Ship Plate Steel with LaCl3-Zn Epoxy CoatingComputational Analysis of the AFM Specimen on Mixed-Mode I+II+III FractureMIC Behavior of the Low Alloy Steel with Different Zn-Epoxy Coating in SRB SolutionCrack Initiation Predictions of the AFM-Specimen under Bend and Torsion LoadingNumerical Simulation of Series Experiments of Concrete FractureInfluence of the Type of Silica Fume on the Rheological and Mechanical Properties of Ultra-High Performance ConcreteStrength Enhancement of Bottom Ash-Based Polymer ConcretesPotential of Shape Memory Complex Materials SMC as Welfare Equipment ActuatorPerformance of Nylon Based Polymer Foams at Elevated Temperature under Tensile LoadingEffect of REM Finishing on Fatigue Behavior of a Shot Peened Low Alloy SteelOptimal Elastic Design of CFCsHigh Cycle Fatigue Parameters of High Chromium SteelSlow Crack Growth and Creep Rupture of Ba0.5Sr0.5Co0.8Fe0.2O3 ? dInfluence of Al-Si Diffusion Coating on Low Cycle Fatigue Properties of Cast Superalloy Inconel 738LC at 800 ?CEffect of Friction Stir Welding Condition on Fatigue Limit of Welded Non-Combustible Mg AlloyA Role of Destructive and Non-Destructive Tests in Creep Damage IdentificationSmall Fatigue Crack Growth Behavior from Artificial Notch with Focused Ion Beam in Annealed 0.45% Carbon SteelLoading Frequency Effects on the Fatigue Crack Growth Rate and Fracture Surface Morphology of Low Carbon Steel in Case of Long-Term Use in Hydrogen GasMicromechanical Modeling of Heterogeneous Materials with Irregularly Shaped PoresEdge-Strengthening of Structural Glass with Protective CoatingsResidual Stresses in As-Welded Joints: Finite Element Modeling and Neutron Difraction Stress MeasurementsCellular Automata Multiscale Model of Creep Damage for MetalsExperimental Investigation of Fatigue Crack Growth in the Welding Nugget of FSW Joints of a 6060 Aluminum AlloyExperimental Study on Polymer Mass Used to Repair Damaged StructuresShaking Table Experimental Study on Damage Mechanism of the Disconnecting Switch under Seismic ExcitationPeridynamic Theory for Damage Initiation and Growth in Composite LaminateInelastic Dynamic Analysis and Non-Linear Static Analysis (Push-Over) of 3-Story and 6-Story RC Buildings of Ductile FramesApplication of the T-Method to 3D BEM Analysis of Cracks in Piezoelectric ComponentsThe Influence of the Weld Width on Fracture Behaviour of the Heterogeneous Welded JointSimulation of a Strategy for the Assessment of Damage in Human Bones by Using FEM and Signal ProcessingEffect of an Internal Open Crack on Pipes Wave PropagationOn the Stress Intensity Factors of Cracked Beams for Structural AnalysisCracks Interaction Effect on the Dynamic Stability of Beams under Conservative and Nonconservative ForcesFinite Temperature Nanovoids Evolution in FCC Metals Using Quasicontinuum MethodBone-Cement Interface Micromechanical Model under Cyclic LoadingComparison of Solutions of Stress Field Based on Hertzian and Combined Numerical-Crystallographic Approaches Beneath NanoindenterInfluence of Boundary Conditions on Higher Order Terms of Near-Crack-Tip Stress Field in a WST SpecimenValuation of TMF Lifetime Calculation Methods and their Limitations of UsabilityFatigue Crack Growth Simulation in Railway AxlesEffect on the Alkali-Activator Mixing Ratio of Geopolymer Mortar Using Bottom AshCrack Propagation from Bi-Material Notches ? Matched Asymptotic ProcedureEvaluation of the Fatigue Resistance of Chromium Slurry Coating Steel Substrate Compounds by Means of an Improved Impact Testing ProcedureStress Responses to Large Simple Shear Deformation in Elasticity Based on the Logarithmic StrainSlow Crack Growth by Grain Boundary Dissolution of Hydroxyapatite in WaterResearch on Acoustic Emission Test Method for Metal Fatigue Fracture Based on Wavelet Packets Feature ExtractionThe Study of AE and ESSPI Technique on the CBF CompositeInteraction of SH-Wave on Multiple Linear Cracks near Shallow-Embedded StructureNumerical Simulation of Multiple Fatigue Crack Growth with Additional Crack InitiationStudy on Damage Parameters and its Size Effect of Concrete by Tension TestElastic-Viscoplastic Field at the Mixed-Mode Crack-Tip under Compression and ShearEffect of Rotational Speed on Thin-Rim Gear Bending Fatigue Crack Initiation LifeInvestigation on Damage Tolerance of Carbon/Epoxy Laminate for Aircraft Structural DesignDamage Analysis of Concrete Subjected to Freeze-Thaw Cycles and Chloride Ion ErosionMeasurements of Mode I and Mode III Fracture Toughness of Spring?s SteelNumerical Implementation of Constitutive Material Law for Simulating the Kinkband Formation in Fiber CompositesFatigue Crack Propagation in New Generation Aluminium AlloysAn Effect of Shot Peening on Retardation and Growth of Short Fatigue Cracks in an Aircraft Al-AlloyThe Effect of Nonlinear Matrix on Crack Propagation in the Particulate CompositeOn Effective Properties of Layers in Damaged Composite LaminatesDefect Size Measurement of Wall Thinned Pipe Using Shearography and Digital Image CorrelationFatigue Focused Optimization of Treatment Parameters ? A Case Study about Deep Cryogenic TreatmentFatigue Behaviour of Notched Ti-6Al-4V in Inert EnvironmentA Comprehensive Study of the Performances of PVD WC/C-Coated Racing GearsEffect of Shot Peening on the Fatigue Behavior of some Sintered SteelsEffect of Heat Treatment on Fracture during Bending in AA6016 Aluminium Alloy SheetsFatigue Growth Models for Multiple Long Cracks in Plates under Cyclic Tension Based on ?KI, ?J-Integral and ?CTOD ParameterDeveloped Random Tessellation for Modeling of MicrostructureFracture Analysis of Cube- and Cylinder-Shaped WST Specimens Made of Cementitious Composites with Various Characteristic LengthFinite Element Simulation on Failure Assessment of Toughened Epoxy AdhesivesDynamic Behavior of Granular Mixture SolidsLoad Sequence Effect on Fatigue DamageAn Experimental and Numerical Investigation of the Mixed-Mode Fracture Toughness and Lap Shear Strength of Aerospace Grade Composite JointsNumerical Investigation into Dynamic Fracture of PCBNA Methodological Approach to the Tolerance Problems during the Assembly Process of Deformable BodiesEnergy Absorption Capabilities of a Square Tube SystemEffects of Tolerances on the Structural Behavior of a Bolted Hybrid JointThe Influence of Short Glass and Polypropylene Fibers on First Crack Formation and Toughness of Cement Based Composites after their Exposure to Fire ConditionsCharacterisation of the Fracture Energy and Toughening Mechanisms of a Nano-Toughened Epoxy AdhesiveAPI J55 Steel Casing Pipe with an Initial Surface Crack under Internal Pressure - Determination of Fracture ParametersStructural and Mechanical Properties of CNX and CPX Thin Solid FilmsSimulation of Rubber-Coated Fabric Material DamageElastic-Plastic FEM Modelling of the Single Overload Effect on the Fatigue Crack Front ShapeEnergy Principle in Crack PropagationInfrared Thermographic Analysis of Railway Brake Disc during BrakingStructure Buckling Reliability Analysis for the Underwater Super-Speed Supercavitating VehicleFinite Element Analysis of Secondary Cracks at a Crack Front under Pure Mode III LoadingOn the Evaluation of the R-Curve Including the Self-Weight Contribution: MortarInfluence of the Secondary Raw Materials on the Mechanical Properties of Multilayer FilmsAnalysis of the Influence of Microstructure Heterogeneity and Mechanical Properties of Welded Joint Constituents on Fracture Toughness for Plane Strain, KIcR-Curve and Size Effect in Quasibrittle Fracture: A Rewriting of the Bazant?s Size Effect LawInteraction of Heat Checks in Aluminum Pressure Casting Dies and their Effect on Fatigue LifeDynamic J-Integral Evaluation of Three-Point-Bend Beams with Various Geometrical DimensionsFracture Behavior of Directional TiAl Lamellar StructuresFailure Mechanisms and Energy Absorption in Composite Elements under Axial CrushExperimental Fracture Behavior of Polypropylene Fiber Reinforced Concrete Specimens with Variable WidthInfluence of the Wall Thickness on the Allowable and Failure Pressures of Two- and Tree-Way Globe Valve BodiesAnalysis of Shear Strength of WoodApplication of Two Methods for Notch Fatigue Life PredictionA Microstructural Sensitivity Study of 316H Austenitic Stainless Steel to Inter-Granular Creep FractureFEA of Fretting Fatigue: A Comparison between ANSYS and ABAQUSFatigue Behavior in Filled Natural Rubber: Study of the Mechanical Damage DynamicsHigh Rate and High Temperature Fracture Behaviour of Polycrystalline DiamondStructural Analysis of Historic Masonry Arch Bridges: Case Study of Clemente Bridge on Savio RiverExplosion and Temperature Resistance of Underground Structures by Free HexagonsApplication of Gradient Based IR Thermography to the GRP Structures InspectionTensile Properties of Random Distribution Short SMA Fiber Reinforced CompositesStudy on Static and Dynamic Mechanical Property of Sandwich Plate with Aluminum Foam Core under Confining PressureStudy on Quasi-Static Growing Crack Field in Visco-Elastic Compressible MaterialFatigue Life Prediction Investigation on Steel Honeycomb Sandwich Beams at High-TemperatureSolving the Equivalent Function of Failure Mode Based on Multiple CorrelationSensitivity Analysis for the Stiffened Plate Structure System with Crack DefectsFailure Conditions from Push Out Tests of a Steel-Concrete Joint: Fracture Mechanics ApproachFailure Conditions from Push-Out Tests of a Steel-Concrete Joint: Experimental ResultsNumerical Stress Intensity Factors Determination for Fabrication Defects in Coronary Stents3-Dimensional Stress Intensity Factor Determination for a Notched Shaft under Mixed Mode LoadingOverview of the Methods for Service Life Prediction on GearsLoad-Rate Sensitivity in 1D Non-Linear Viscoelastic ModelEffect of Tensile Dwell on Low Cycle Fatigue of Cast Superalloy Inconel 792-5A at 800?CAssessment of Existing Concrete BuildingsResidual Fracture Toughness of Concrete Subject to Elevated TemperaturesTaking Full Advantage of Nominal Stresses to Design Notched Components against Variable Amplitude Multiaxial FatigueSemi-Permeable Cracks in Magnetoelectroelastic Solids under Impact LoadingA Three Dimensional Graphical Aid for Fatigue Data AnalysisMeshfree Continuum Damage Mechanics Modelling for 3D Orthogonal Woven CompositesA Novel Methodology for Fatigue Delamination Growth Analysis of CompositesImpact Detection Using Artificial Neural NetworksFailure Analysis of Bolted Composite Joint Based on Extended Finite ElementInfluence of Drawing Straining Path on Hydrogen Damage of Prestressing Steel WiresStructural Integrity of CO2 Transport Pipelines ? A ReviewDamage Mechanics in G/E Tubes under Tension-Torsion Cyclic LoadingAcoustic Damage Analysis of a Gear SystemMeshless Local Integral Equation Method with Analytical Formulation and its Application to Computational Fracture MechanicsExperimental Study to Verify the Fatigue Limit Found by Thermal Analysis of Specimen Surface in Mono Axial Traction TestMeasurement of Deformation on Welding Specimen Using ESPI
