Sonstiges, Englisch, 2750 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Sonstiges, Englisch, 2750 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
ISBN: 978-3-0357-1966-6
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Charged Defect Formation Energies in TiO2 Using the Supercell ApproximationEquilibrium and Non Equilibrium Vaporization Processes of CeramicsComputational Phase Studies of Oxide CeramicsDSC Kinetic Studies on Glass Ceramic System Crystallizing Indialite (Mg2Al4Si5O18)The Crystallisation of B-Phase Glass-CeramicsSelf-Propagating High-Temperature Synthesis: Non-Equilibrium Processes and Equilibrium ProductsThermodynamic Sintering and Microstructure of Nickel Ferrite Based MaterialInfluence of Co-Doping on the Sintering Map of an Ultra Fine and Ultra Pure Alpha Alumina PowderModels, Methods & Madness: Ceramic Components Made with Highly Reactive Lithium HydrideThe Instability of Li2O-Containing Celsian in BAS/Si3N4 CompositesSr2+ - Mn4+ Doped SiAION CeramicsPreparation of Synthetic Cordierite by Solide-State-Reaction with Addition of DolomiteModelling of the Generation of Residual Stresses of Thermal Origin in Ceramic MaterialsSimulation of the Thermoelastic Properties of Sintered CeramicsFracture Resistance of Ceramics: Direct MeasurementsSize Effect in Fracture Toughness Determination of Brittle MaterialsCross-Property Relations between Elastic and Thermal Properties of Porous CeramicsElectrical Resistivity, Thermopower and Magnetic Susceptibility of Nonstoichiometric BaVS3On Thermal Conductivity of Porcelain Glaze with a Few Added ComponentsDevelopment of Monolayered Low Friction PVD Ceramic Coatings for Application on Tools and Mechanical ComponentsMicrostructural Aspects of Ceramic-Metal Composites Performance in Erosive MediaThe Wear of Alumina Matrix Particulate Composites at Different EnvironmentsCorrosion of Si3N4-Ceramics in Acids and BasicsCorrosion of Glazes Coated with Functional Films in Detergent SolutionsEffect of Dense Layer Formation on Dissolution Rate of MgO-C Refractory in Molten SlagCorrosion of Mullite in Contaminated Water Rich Gas Mixtures at High Temperatures: The Effect of Impurity DiffusionCorrosion Behaviour of Structural Ceramics in Supercritical WaterCorrosion Behaviour of Vitrified Heavy Metals from Industrial WasteHydrothermal Synthesis of Advanced Ceramic PowdersMorphology of Zirconia Nanopowders Crystallised under Hydrothermal ConditionsPreparation and Characterization of Copper-Doped Tin Oxide Nanopowder via Hydrothermal RouteTiO2 Nanopowders for Sensing Applications; A Comparison between Traditional and Hydrothermal Synthesis WayNovel Synthetic Clays for Cation ExchangeSynthesis of ZrW2O8 Ceramics and Composites from Aqueous Sol-Gel PrecursorsSynthesis of Gamma-Alumina Nanoparticles by Freeze DryingYAG Powder Synthesis and CharacteristicsSynthesis of Undoped ZnO Nanoparticles by Spray PyrolysisSynthesis, Characterization and Sintering Behavior of Nanocrystalline Cordierite CeramicsCharacterization of Indium Oxide Nanoparticles Prepared by Soft Chemistry RouteNovel Synthesis for Ultrafine Barium Titanate Powders Using Peptized Titania Nano-SolStudy of Pseudoboehmite Synthesis by Sol-Gel ProcessFormation Mechanisms of Sol-Gel Derived CordieriteSynthesis of Cr-Doped Sphene Ceramic Pigments by Spray DryingCeramic Pigments with Perovskite StructureThermal Plasma Processing of Functional Ceramic MaterialsPreparation of Nano-Sized TiO2 Particles by Self-Propagating-High-Temperature SynthesisLaser Synthesis of Oxide NanopowdersSiC Powder for Casting from Aqueous Suspension
Microstructural Transformations of Al2O3-TiO2 and Al2O3-ZrO2 Powders Induced by High-Energy Ball-MillingMechanosynthesis of Nanocrystalline MgB2 Ceramic Powders in Hydrogen Alloying Mills via Amorphous Hydride IntermediateBismuth Zinc Niobate (Bi1.5ZnNb1.5O7) Nanopowder Derived from High Energy Mechanical ActivationStructure and Magnetic Properties of Strontium Hexaferrite Nanopowders Prepared by Mechanochemical SynthesisNanopowders Characterization Using the Optical Spectroscopy MethodsInterparticle Potentials of Aqueous Alumina SuspensionsRheology of Nanometric PowdersElectrohydrodynamics and Electrokinetics of Colloidal Ceramic Gels: Fundamentals and ApplicationsSurface Modification of Nanopowder by Milling under Electric DischargeDispersion Properties of Polymer Encapsulated TiO2 Nano-Powders in Low Dielectric SolventsDevelopment of Near Net Shape Forming Processes of Ceramic Parts by Colloidal ProcessingColloidal Processing of Powder for Membrane ApplicationsFreeze Casting of Ceramic Components Using Ice Cores and Ice Moulds3-D Structures via Tape Casting and LaminationFreeze Casting of Aluminium NitrideInk-Jet Printing of Ceramic Micro-Pillar ArraysDevelopment of High-Speed Centrifugal Compaction Process of AluminaShape Forming of Alumina-Silica of High Thermal Stability for Space Propulsion ApplicationsTwin-Screw Extrusion ModellingRoll Pressed LZSA Glass-CeramicsInfluence of the Additive Combination on the Aqueous Tape Casting of Barium TitanateNew Polymeric Binders in Ceramic ProcessingRheology of Ceramic Suspensions with Biopolymeric Gelling AdditivesPacking Density and Consolidation Energy of Colloidal Particles through Pressure FiltrationHigh Energy Ball-Milling of Tin Titanate Zirconate for Use in Microwave ApplicationsCharacterization of Particle Alignment in Pre-Sintered Alumina Body Using Birefringence Imaging MicroscopyPhenomenological Theory of Sintering and its Application to SwellingModel Constrained Sintering Experiments: Bi-Layers and Cylinder-Filled RingsSintering of Tailored Powder Components: Multi-Scale Modeling and ExperimentationSintering Simulation at a Scale Lower than the Grain SizeAn Experimental Validation of a 3D Kinetic, Monte Carlo Model for Microstructural Evolution during SinteringMulti-Scale Simulations of Rearrangement Effects and Anisotropic Behaviour during SinteringA Critical Assessment of Porosity Coarsening during Solid State SinteringSintering of Solid Oxide Fuel Cell MaterialsMicrostructure-Property Relationships in Wear Resistant Alumina/SiC "Nanocomposites"Microstructure-Property Relationships in Sintered Alumina CeramicsMicrostructure Evolution in Samples Prepared by Filter Pressing and Sintering of Zirconia NanopowderThe Use of Capability Indices in Process Evaluation of Ceramic MaterialsInfluence of Pressure and Heating Rate on the Mechanical Properties of Mesophase Based Sintered PartsMelting Behaviour and Surface Structure of Glazes Containing Wollastonite and DolomiteMonolithic and Cellular Sintered Glass-Ceramics from WastesDevelopment of an Efficient of Microwave Sintering ProcessHot-Pressing and Hot-Forging of Polycrystalline Powder Particles with Unique MicrostructuresSintering of Mechanically Activated PowdersInfluence of Microstructural Parameters on the Sintering of Transition Metal CarbidesThe Role of the Milling Step on the Sintering Behaviour of Monazite Powder LaPO4 - Densification and Resulting MicrostructurePressureless Sintering of AINBio-Inspired Processing of Ceramic MaterialsNanocrystals Synthesis by MicroreactorsProcessing and Applications of "Oxide Nanoskin"Synthesis and Characterization of Plate-Like Cerium Phosphate via Soft Solution ProcessingEnhancement of Calcia Doped Ceria Nanoparticles Performance as UV Shielding MaterialSoft Solution Synthesis and Characterization of Zinc Oxide Films with Nano-Rods and Nano-Screws SuperstructuresSynthesis and Photochemical Properties of White Calcia-Doped Ceria Nanoparticles via Soft Solution ProcessesStructure of Yttrium Aluminium Garnet Obtained by the Glycothermal MethodSynthesis of Hexagonal Ferrites by Citric Complex MethodNear-Net-Shape Ceramics by Reactive ProcessingPowder Injection Moulding (PIM) of Mesophase Carbon with Water-Based BindersElectrophoretic Deposition as Shaping Technique - A CAM ApproachFree Form Fabrication of 3D-Ceramic Parts with InkJet-PrintingKinetic Investigation of the Curing and Pyrolysis Procedures Used for the Preparation of Polymer-Derived Boron Nitride FibresNanofibres of Ceramic Compounds by ElectrospinningAdsorption of Biomolecules on Ceramic Particles and the Impact on Biomedical ApplicationsDesign of Nanohybrids from Well Defined NanoBuilding BlocksPhase Separation in Sol-Gel Systems of Organic-Inorganic HybridsNanoceramics-Biomolecular Conjugates for Gene and Drug DeliveryNew Porous Visible Light Active Photocatalysts of MOx-Titanate (M = Cr, Ni) NanohybridsIn Situ and Ex Situ Characterization of PFSA-Inorganic Inclusion Composites for Medium Temperature PEM Fuel CellsWays of Controlling Structure and Properties of Sol-Gel-Derived Hybrid Micro- and Nanocomposite MaterialsA New Fabrication Method of Porous Ceramics Using Unidirectional SolidificationDesigned Construction of Functional Mesostructured Porous MaterialsSynthesis of Highly Monodispersed Core/Shell Mesoporous Silica SpheresBiomorphic Ceramics as Porous Supports for Zeolite CoatingProcessing and Properties of Porous Al2O3 by Slurry Foaming Combined with GelcastingMicrowave Hybrid Sintering of Nanostructured YSZ CeramicsMicrowave-Material Interaction in Oxide Ceramics with Different AdditivesMicrowave Assisted Modification and Coating of Carbon MaterialsMicrowave Processing of CeramicsDielectric Properties of Spark-Plasma-Sintered Strontium NiobatesProduction Scale m3 Batch Furnace for Hybrid-Heating and Microwave SinteringSynthesis of Structure Controlled Magnetostrictive Materials by Use of Microgravity and Magnetic FieldsHigh-Pressure Synthesis of High-Purity and High-Performance Diamond and cBN CeramicsComparison of Conventional and High Velocity Compaction of Alumina PowdersDensification of Nano-Sized Alumina Powders under Radial Magnetic Pulsed CompactionHot Explosive Consolidation of WC-AlNi CompositesShock Compression of Powders by Two-Stage Gasdynamic GunMicrostructural Design for Attaining High-Strain-Rate Superplasticity in Oxide MaterialsSelf-Propagating High-Temperature Synthesis, Dynamic/Quasi-Static Densification, and Superplasticity of Ceramics Development of Elastico-Luminescent Nanoparticles and their Applications Fabrication and Morphological Stability of Aluminium Nanostructures En Route to Nanopatterned Sapphire Application of Fibrous TiO2 as a Photocatalyst in Aqueous Media Conventional and SPS Sintering of a Nanocrystalline Alumina: A Comparative Study Non Conventional Synthesis of Monoclinic Celsian from Ba-Exchanged Zeolite A: Study of the Effect of Residual Na and Forming Pressure Sinterable SHS Powders - Illustrative Examples of the State-of-the-Art Mechanical Activation as a New Method for SHS Combustion Synthesis of a-Si3N4 Powder under Low Nitrogen PressureRecent Advances in Synthesis and Densification of Nanomaterials in Self-Propagating High-Temperature Regime Nanocomposite TiC-TiB2 Powders by SHS through Metastability ApproachExperimental Study on SHS under High Nitrogen PressureSelf-Propagating High-Temperature Synthesis of Dense TiC-TiB2-MeO Ceramics Self-Propagating High-Temperature Synthesis of Carbide- and Boride-Aluminides Synthesis Mechanisms of the Combustion Synthesis of IntermetCers Composites Effect of Al2O3 Diluents on Microwave Assisted-SHS Process of Al2O3-TiC Fabrication of SPS Compacts from Ta, Hf-Containing ZrB2-ZrC Powder Mixtures Synthesized by the MA-SHS in Air ProcessSHS Synthesis of the Materials in the Ti-Al-C-N System Using Intermetallics Dense ?-Alon Materials Derived from SHS Synthesized Powders SHS Oxide Catalysts: Synthesis, Properties and ApplicationsStructure and Phase Formation in SHS_FGMLaminated and Functionally Graded Ceramics by Electrophoretic Deposition(SiC/Ti3SiC2)n Multi-Layered Coatings Deposited by CVD Mapping of Elemental and Phase Composition in Air-Oxidized Ti3SiC2Thermal and Electrical Conductivity of Composites with Graded InterfacesInfluence of the Architecture on the Mechanical Performances of Alumina-Zirconia-Mullite Ceramic LaminatesApplication of X-Ray Microtomography to the Microstructural Characterization of Al-Based Functionally Graded MaterialsThe Analysis of Stress Concentration in Piezoelectric Ceramic Multilayer ActuatorsFGM's for Biomedical ApplicationsFunctionally Graded Electrode Materials for Thermoelectric DevicesSelective Transmission of Electromagnetic Wave by Using Diamond Photonic Crystals with Graded Lattice Spacing Development of Multi-Layered and Graded Die Coatings for Materials Processing ApplicationsDevelopment and Application of Coated Ceramic Cutting ToolsSuspension Plasma Spraying: From Injection to CoatingAtmospheric Pressure Plasma-Enhanced CVD for Surface Modification: Principles and ApplicationsGrain-Focused Microstructure Simulations: Stress-Induced Evolution of Polycrystalline Films Low Temperature MOCVD-Processed Alumina CoatingsMOCVD Route to the Fabrication of Calcium Copper Titanate (CaCu3Ti4O12) Thin Films Sintering of EPD Ceramic Coatings by Electron BeamMorphological and Structural Characterization of TiN/ZrN Superlattices Deposited by Reactive R.F. Magnetron Sputtering Structure and Electromechanical Properties of Quenched PMN-PT Single Crystal Thin Films Coating of Austentic Stainless Steel with Ti/O Compositionally Gradient Film by Reactive DC Sputtering Microstructural and Mechanical Characterization of Mechanically-Activated Plasma-Sprayed Nanostructured Al2O3-TiO2 and Al2O3-ZrO2 Coatings Thermally Sprayed Coating Composites for Film Heating Devices Improved Mechanical Properties by Nanoreinforced Ceramic Composite HVOF Coatings Coating of Polymer Surfaces by Liquid Phase Deposition of TiO2: A Biologically-Inspired ApproachNanostructured Ceramic Thin Films and Membranes by Wet Chemical Processing MethodsZeolite Coatings on Porous MonolithsThe Influence of PZT Film Thickness on Microstructure in CSD Processing Bioactive Apatite-Mullite Glass-Ceramic Coatings on Titanium Substrates Synthesis and Electrophoretic Deposition of Mullite Precursor Sols for the Oxidation Protection of Carbon Fibre Reinforced Composites Structure and Properties of a+? Titanium Alloy - TixAly Intermetallic Phases Laminate Composite Surface Micromachining of Polyureasilazane Based Ceramic-MEMS Using SU-8 Micromolds Assessment of the Adhesion of Ceramic Coatings FeTiO3/Fe2O3 Multilayered Films for New Magnetic Semiconductors above Room TemperatureResidual Stress Relaxation and Microstructure in ZnO Thin Films Design and Development of Novel Coatings to Inhibit Degradation due to High Temperature Sulphidation Ceramic and Cermet Coatings for Cylinder Liner in Ultra Light Weight Engines - Novel Processing and Manufacturing of Ceramic Layer CompositesWear on SAE 52100 with Nanocoating Al2O3 by MOCVD Process Second Generation High-k Gate InsulatorsOptimization of UHV-CVD Thin Films for Gate Dielectric ApplicationsMagneto-Photonic and Magnonic Crystals Based on Ferrite Films - New Types of Magnetic Functional MaterialsHot Pressing of cBN Ceramics with Al BinderPreparation of Cu/GDC Cermet Anode by Sintering via Surface Modification with MgO SolMicrostructures and Interfaces in Melt-Growth Al2O3-Ln2O3 Based Eutectic CompositesTailoring the Properties of Ceramic-Based Composites Using Co-Extrusion ProcessingCeramic Composites for Automotive Friction DevicesPolyethylene-Clay Nanocomposites Using Ionomeric CompatibilizerCeramic Matrix Composite with Increased Thermal ConductivitySpark Plasma Synthesis/Sintering of Dense Ceramic, Intermetallic and Composite MaterialsA Study of the Platinum/Alumina InterfaceEffects of Magnetic Powder Loading on Mechanical Properties and Magnetic Properties of Natural RubberAttainment and Characterization of the Thermosetting Polymer Loaded with Barite to be Used in the Manufacture of Isolating Plates to Bar the X-Ray RadiationEvaluation of Mechanical Properties and Comprehensive Modeling of CMC with Stiff and Weak MatricesFatigue and Creep Behaviour of a SiCf/SiC Composite for Nuclear Fusion Reactor ApplicationsCharacterisation of Carbon Fibre Kaolin Matrix CompositesStructure and Properties of Heterophase Nanostructured CeramicsImpact Testing on Al2O3 and Al2O3/ZrO2 Laminated CompositesPercolation Analysis of Electrical Conductivity and Mechanical Properties for CNT-Dispersed Y-TZP NanocompositesLayered Interphases in Ceramic Matrix Composites and Relation with Interfacial BehaviourDegradation of Conductivity and Microstructure under Thermal and Current Load in Ni-YSZ Cermets for SOFC AnodesMeasurement and Simulation of the Oxidation of Carbon Fibers and C/SiC CeramicNanostructured Carbon and Graphite ? Ultra Lightweight Engineering MaterialsCeramic Composites and Thermal Protection Systems for Reusable Re-Entry VehiclesNew Generation of CBN Grinding Wheels Bonded with Glass-CeramicDiffusion of Metallic Species and their Influence on Interfacial Reactions in Glass-Ceramic-to-Metal SealsMicro- and Nano-Scale Wetting of Reactive Metal at Metal/Ceramic InterfaceWetting/Dewetting Phenomena in the CaF2/Ga and CaF2/Ge SystemsInfluence of Oxygen and Titanium Modification of AlN Surface on the Properties of Direct Bonded AlN-Cu JointsResidual Stresses in Ceramic Metal Assembly after Brazing ProcessResidual Stresses in Cast Ni-Cr Alloys-Ceramics Joints with an Intermediate LayerModelling of the Current-Time Characteristics in Anodic BondingTransient-Liquid-Phase and Liquid-Film-Assisted Joining of CeramicsSoldering and Brazing Metals to Ceramics at Room Temperature Using a Novel NanotechnologyTransient Liquid Phase Bonding of Ceramics and Metal Matrix CompositesMetallization of AlN for ElectronicsNew Glass Sealing Method with Lead-Free SoldersNickel Aluminides as a ?Filler? for Joining Ceramics and MetalsProperties Dependency of Alumina - Steel Joints on Bonding TechniqueHigh Temperature Plastic Flow and Ductility in Polycrystalline Oxide Ceramics: Doping Effect and Related PhenomenaGrain Boundary Diffusion in Cation-Doped Superplastic 3Y-TZPAnnealing Effects on Toughened Intra-Type NanocompositesThe Comparative Analysis of the Non-Symmetric Thermal Shock Crack Propagation in Al2O3 and ZrO2 BarsApplication of Fractal Geometry to Fracture Forensics, Research and Production R-Curve Behaviour of Alumina Matrix Ceramics with Long Cracks Electro-Stimulated Piezo-Spectroscopy for Measuring Nano-Scale Residual Stress Fields in Ceramics Fatigue Behaviour of Structural Ceramic CompositesStrengthening of ZrO2 Ceramics due to Nano-Crystallization Influence of Grain Size Distribution on Hardness and Fracture Toughness of Si3N4/SiC Nanocomposites In Situ Investigation of Debinding of Non-Oxide Ceramic Polarization Light Optical Texture Analysis for the Structural Characterization of CIM Components Processing and Sintering of Alumina-YAG NanocompositesNanoparticle Bonding Technology for Composite MaterialsAdvances in Ultrasonic Assisted Grinding of Ceramic MaterialsSintering of Dense Silicon Nitride Ceramics at Low Temperature Development of CNT-Silicon Nitrides with Improved Mechanical and Electrical PropertiesLight Weight Ceramic Armor - Influence of Processing on Ballistic PerformanceSintering of Silicon Carbide Ceramics with Additives Based on the (Y2O3-Al2O3-SiO2) System Hard and Tough Boron Suboxide Based Composites Production of Si3N4-Based Articles and their Application in Aerospace IndustryThermo-Structural Analysis of Ceramic Vanes for Gas Turbines Advanced Machining Technology for Gas Turbine and Heat Engine ComponentsCeramic Piston for Hydraulic Brakes: Design Study Fabrication, Wear and Performance of Ceramic Cutting ToolsSiAlON-SiC-Composites for Cutting Tools Electrochemical Ceramic Device for Hydrogen-Phosphate Ion SensorCeramic Materials for Mass-Sensitive Sensors - Detection of VOCs and Monitoring Oil DegradationPorous Ceramic Humidity Sensors Using Sol-Gel Processed ZrTiO4 NanoparticlesCeramic Chemical Sensors: An OverviewSemiconductor Gas Sensors for Environmental MonitoringGas Sensing Properties of TiO2 and SnO2 Nanopowders Obtained through Gel CombustionSensor Sensitivity Study of the Thin and Thick WO3 Films to OzoneSolid Oxide Fuel Cells: Status, Challenges and OpportunitiesSAXS Characterization of Carbon Aerogels for Catalytic SupportsElectrochemical Active Parts at Electrode/Electrolyte Interfaces for Solid Oxide Fuel Cells (SOFCs) by Isotope Labeling-SIMS Analysis Synthesis and Processing of Perovskite Oxides for Solid Oxide Fuel Cells Anode FabricationMicrostructural Control of Composite Anode for Anode Supported Intermediate Temperature Solid Oxide Fuel Cells Single Chamber Solid Oxide Fuel Cell Using BaLaIn2O5.5 Electrolyte Fabrication of Components for Solid Oxide Fuel Cells by Tape Casting and Magnetic Pulsed Compaction Correlation of Electrochemical Properties and Pore Structure for Carbon Nanoarchitectures with Ultrathin, Conformal Poly(o-Methoxyaniline) Coatings Reassembled Octatitanate/Carbon-Fiber Composites as High-Rate Lithium Insertion ElectrodePseudocapacitive Manganese Oxide Prepared by a Spray Pyrolysis/Electrostatic Deposition TechniqueMake Hydrogen while the Sun Shines: The Photoelectrolysis of Water Using Oxide SemiconductorsZirconia Inert Matrix for Plutonium Utilisation and Minor Actinides Disposition in Thermal ReactorsAdvanced Radiation-Resistant Ceramic CompositesThermodynamic Study of Al-Li-O-Zr: Experimental Results and Thermodynamic AssessmentThermochemical and Thermophysical Properties of Advanced Fission Fuel MaterialsMixed Lithium-Boron MaterialsThermodynamic Modelling of the Uranium-Carbon-Oxygen System in the Frame of the Uranium Oxide and Carbon Interaction in the TRISO Fuel Particle of High Temperature ReactorRestructuring of Nuclear Oxide Fuel under High Burnup IrradiationRadiation Damage Effects in Insulators for Fusion Reactors: Microstructure Evolution in MgO-Al2O3 System Oxide CrystalsA First Principles Study of Palladium Impurities in Silicon CarbideElectrical Conductivity of Proton Conductive Ceramics under Reactor IrradiationReducing Hydrogen Penetration through Corrosion Layer Formed on Zirconium Alloys by Iron AdditionProcessing Ceramics for Radioactive Waste ImmobilisationInfluence of Noble Metal Particles on Redox Reactions on Uranium Dioxide SurfacesSingle Phase Ceramic Wasteforms for Plutonium DispositionSynthesis and Characterisation of BaMIV(PO4)2 in the View of Conditioning of the ActinidesImmobilization of Hafnium Surrogates in FluorapatiteApplication of Protonic Conduction in Perovskite-Type Oxides: Mixed Proton-Electron-Conducting Membrane for Hydrogen SeparationStudies in Mesoporous Silicates: Impedance Measurements on SBA-15 Loaded with Sulfonated-Polystyrene and Nafion with SBA-15 FillerCatalytic and Electrical Properties of Electrochemical NOx Reduction SystemDevelopment of Non-Silicate Microporous Membranes with High Chemical ResistanceElaboration of Superhydrophobic Nanoporous Ceramic Membranes - Application to DesalinationAdsorption and Incorporation of Cadmium into a Calcium HydroxyapatiteInfluence of Slurry Formulation on Mechanical Properties of Reticulated Porous CeramicDirect Oxidation of Dry Methane by Pd-Ni Synergy Catalyst Supported on Lanthanum Chromite Based AnodeMethane Reforming Deposit by Suspension Plasma SprayingNovel Approches in Oxidative Catalysis for Diesel Particulate AbatementCatalysts for Wet Air Oxidation Based on Ce-Zr-Pr-O Mixed Oxides Prepared by Soft ChemistryHarvesting and Manipulating Zeolite NanocrystalsOxygen Radicals Occlusion/Release Behavior of Nanoporous Aluminosilicate, Ca12Al14-XSiXO33+0.5X (0?X?4) Structure and Catalytic Testing of Hybrid Al2O3 Systems Deposited on Heat Resisting Steel Substrate by High-Temperature Oxidation and PVD MethodsPhotocatalytic Fiber for Environmental ApplicationSol-Gel Immobilization of Catalytic Molecules and Applications: A ReviewThe Catalysis of NiO-Al2O3 Aerogels for the Methane Reforming by Carbon Dioxide Ceramics as Catalysts and Catalyst Supports for Propulsion Applications - The Objectives and the ChallengesPore Structure of Alumina Derived from the Alkyl Derivatives of BoehmiteDecomposition of Orange II with Si/SiC-TiO2 Fine Open-Cell Photocatalytic FilterSampling Techniques for Respirable Crystalline SilicaCharacterization and Applications of Calcium Ferrites Based Materials Containing Active Oxygen SpeciesEnvironmental Aspects on the Use of Bayer's Process Bauxite Residue in the Production of CeramicsEnvironmental Applications of the Reactive Titania Coatings Elaborated by Suspension Plasma SprayingStructured Catalysts for Environmental and Energetical ApplicationsSol-Gel-Derived Hydroxyapatite and its Application to Sorption of Heavy MetalsDevelopment of Platy Alumina and its Application Improving the Properties of Low Temperature Sintered Alumina Bodies with Granite Reject AdditionsProperties of Wastes-Based Extruded Ceramics FormulationsA Study of Porous Slag with Plasma Arc MeltingDevelopment of Waste-Containing Malayaite Ceramic PigmentsCeramic Brick with High Water Retentivity Prepared from Ceramic Waste and by ProductsOn the Plasticity of Clay Mixtures with Bauxite Residue of the Bayer ProcessNext Generation Carbon-Containing Refractory CompositesMineralizing Spinel Formation with Boron-Containing CompoundsParticle Distribution Design in a Self-Flow Alumina Refractory Castable without CementInfluence of Suspensions Rheology on the Properties of Light Weight High Temperature MaterialsRefractory Materials and Products Based on Natural Wollastonite for Making Ceramic Accessories to be Used in Aluminium IndustryRheological and Thermomechanical Behaviour of Steel Fiber Reinforced Carbon Containing CastablesInvestigation into Hydration Resistance of CaO-Containing MaterialsThe Influence of Starting Mass Grain Size Distribution on Magnesia-Spinel Products MicrostructureCarbon: Its Forms and its New ApplicationsModelling High Temperature Refractory Structures for the Glass FurnaceFabrication and Testing of Corrugated 3D SiSiC Ceramics for Porous Burner ApplicationsNiobate Complex Perovskite Microwave Dieletric Ceramics Ba(Me1/3Nb2/3)O3 (Me= Zn, Co, Ni and Mg)Effect of Thermal Stress on the Microwave Dielectric Properties of (300-X) nm MgTiO3 /(X) nm CaTiO3 Thin FilmsMicrostructural Evolution Model of the Sintering Behaviour and Magnetic Properties of NiZn Ferrite NanoparticlesGiant Dielectric Response in Perovskite-Derivative CaCu3Ti4O12 Prepared by Polymerized Complex MethodA High Throughput Search of Dielectric Thin Films for Tunable DevicesPreparation and Characterization of Indium Tin Oxide for Optical Devices by Chemical ProcessSilica Additions and the Performance of PTC ThermistorsResearch on the Fabrication of BaTiO3-Based PTCR Materials and Thermistors by Polyacrylamide Gel ProcessInvestigation of ZnO Based Thin Films as Resistance Materials with Small Temperature CoefficientsGate Materials and Fabrication-Processes of Metal-Ferroelectric-Insulator-Semiconductor Memory FETs with Long Data RetentionNanoscale FerroelectricsLead Doping of Wet-Chem. PZT 95/5 for Enhanced Electrical Performance in Ferroelectric Power Supply ApplicationsFabrication, Microstructure and Mechanical Properties Relations of Ferroelectric Barium Titanate Reinforced with Alumina Micro/Nano ParticulatesRelaxor Single Crystals with Giant k31 ModeElectromechanical Properties of Ferroelectric Thin Films for Piezoelectric MEMS ApplicationsPiezoelectric Ceramics Based on Perovskite Solid Solutions with MPB - Mechanochemical Activation and Texturing for High Sensitivity and PowerNew Advances in Forming Functional Ceramics for Micro DevicesIterative Method in the Characterization of Piezoceramics of Industrial InterestInfluence of Fibre Diameter on the Microstructure and the Piezoelectric Properties of PZT-FibresTime-Dependent Nonlinear Ferroelastic Behaviour of Soft Lead Zirconate Titanate PiezoceramicsCharacteristics of (1-y)[(Na0.5Bi0.5)1-xBax]O3-yBa(Cu1/2W1/2)O3 Ceramics Prepared by Hydrothermal Synthesis RouteSol-Gel Bonded Piezoelectric Lead Zirconate Titanate CeramicsCharacterization of the Aurivillius Type PbBi4Ti4O15 Piezoelectric Ceramic Doped with Eu3+Sol-Gel Transparent PLZT Ferroelectric CeramicsRecent Advances in Pyroelectric Ceramics and Thin Films for Applications in Uncooled Infra-Red Sensor ArraysMagnetoelectric Effect in Multiferroic Perovskite-Oxide CompositesFerromagnetic Homogeneous Polycrystalline Zn1-xCoxO OxidesExchange Bias in CrO2/Cr2O3 Bilayer Thin FilmsAnalysis of the Magnetic Anisotropy in Ba Ferrite ParticlesCompatibility Studies of Z- and Y-Type BaCo Hexaferrites for Low-Temperature Co-Firing with AgLarge Magnetoresistance at Oxide La0.7Ca0.3MnO3 and YBa2Cu3O7 InterfacesStructural, Magnetic and Transport Properties of Layered Cobaltites LnBaCo2O5+xComplex Permeability of Ferrites Correlated with their MicrostructureMagnetoresistance Effect of La0.8Bi0.2MnO3/MgO/Co Heterojunction DeviceSynthesis and Electromagnetic Properties of Ca2MTeO6 (M = Mn, Co, Mg)Development of a Super Broadband RF Splitter Using Bead Type Ferrite Core TransformersFabrication and Characteristic Investigation of Multifunctional Oxide p-n HeterojunctionsMagnetophotonic Crystals: Now and FutureHybrid Ordered Hole-Random Hole Optical FibersComparative Optical Characterization of Transparent Nd-Doped YAG Ceramics and Single Crystals for Laser ApplicationsVanadium Doped Antimony-Tin Oxide Nano-Sols and their Films Produced by a Sol-Coating MethodSize and Surface Control of Optical Properties in Silicon NanoparticlesProcessing and Characterization of Phosphorescent Strontium Aluminate PowdersMagnetization Reversal by Spin-Polarized Current in Magnetic Tunnel Junctions with MgO BarriersFast Photonic Switches with Ferroelectric FilmsGrowth and Property Characterization of Epitaxial MAX-Phase Thin Films from the Tin+1(Si, Ge, Sn)Cn SystemsExperimental Study and Modelling of Combustion Front Velocity in Ti-2B and Ti-C Based Reactant MixturesEquivalent Thermal Conductivity of Insulating Layer in Insulated Metal Substrates
