Buch, Englisch, 2818 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 4900 g
Buch, Englisch, 2818 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 4900 g
ISBN: 978-3-03785-194-4
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preface and Committees
Chapter 1: Materials Properties
Study of the Sealing Characteristic of Polytetrafluoroethylene-Coated O-Ring Applied in Gas-Tight Deep-Sea Water Sampler
Self-Assemble Behavior of Amphiphilic Diblock Copolymer of Methoxy Poly (Ethylene Glycol)/Polyester
Preparation of Controlled Microporous High Speed Steel and its Composite Self-Lubrication Materials
Research on In Situ Anionic Polymerization of PA6/PI Alloy
Simplified Method for Considering Dynamic Second-Order Effects of Elastic SDOF System under Earthquakes
Volatilization of MgO from Ludwigite in Carbothermal Reduction-Nitridation Process
Study on Thermal and Mechanical Properties of Natural Rubber Latex Modified by Trichlorobromomethane
Study of Fibre Tourmaline/PVA Nanofibre Prepared by Electrospinning
The Application of Multi-Axial Warp Knitted Fabrics in Wind Turbine Blade
Research on Diamond Wheel’s Specialties during ELID Ulterprecision Grinding of Silicon Nitride
Present Situation and Development Perspective of Soft-Contact Electromagnetic Continuous Casting Technology
Studies on Multihollow PUA-EMA-St Crosslinked Copolymer Beads: Synthesis and Hollow Structure
Synthesis and Characterization of Novel Functional Polymers from Hemicelluloses
Production of Size-Selected CuXSn1-X Nanoclusters
Synthesis and Properties of a New Diarylethene Bearing n-Hexyl for Holographic Optical Recording
Test Research on the Surface Residual Stress of Dimensional Ultrasonic Vibration Grinding for Al2O3/ZrO2(n)
Study of Latex Migration Mechanism during Coating Consolidation
Study on Volatile Substances of Different Provenances Teak(Tectona Grandis L.f) Wood by TGA
Preparation of Magnetic Expanded Graphite by Sol-Gel Method and its Electromagnetic Properties
Preparation and Performance of TiC Whisker Toughening Alumina Ceramic Cutting Tool Composite
The Effect of Plasma Treatment on the Performance of Poly(lactide-Co-Glycolide) Fiber
Study on the Relationship between Tensile Sample Lamination and Inner Quality of Q345 Slabs
Study on Efficiency-Reinforcement Design Methods for Elastomeric Hydraulic Reciprocating Sealing
Researches on the Properties of Stearate-Carboxymethyl Konjac Glucomannan Ester Prepared by Microwave Method
Preparation and Ferroelectromagnetic Characteristics of Bi2SrNdNb2FeO12 Ceramic
The Study on Gelatinization Pressure of Starch by Ultra-High Pressure Processing
Study on Spheroidization of Tungsten Powders by RF Plasma Processing
The Effect of Carbon Nanotubes on the Tribological Behaviors of PEEK Composites
Structure and Magnetostrictive Properties of Tb0.2Pr0.8(Fe0.4Co0.6)1.9Bx Alloys
Structure Characterization of Mg-Al Spinel Synthesized from Industrial Waste
Synthesis of Silver Nanowires and Investigation of their Optical Limiting Properties
a–Pinene Isomerization Catalyzed by a Nanometer Solid Superacid
Thermo-Mechanical Properties and Microstructure of Al2O3-SiC-SiAlON Composites
Study on the Durability of Concrete with Mineral Admixtures to Sulfate Attack by Wet-Dry Cycle Method
Sol-Gel Combustion Synthesis of Nanocrystalline Cerium (IV) Oxide Powders
Study on Microstructure of Quenched Martensite in W6Mo5Cr4V2 Steel
Silica Nanowires Decorated with Cryptophane-A for Sensing Methane
Study on Fire Resistance Design Parameters of RC Structure
Study on Fast-Releasing Calcium Phosphate Cement for Accelerating the Release of Antibiotic
Research on Surface Cracks of Thin Slab
Study on Seismic Performance of Single Pylon Cable-Stayed Bridge at High Intensity Seismic Region
Study on Technique of Induction Cladding Alloy Layer in Steel Tube Outer Wall and Property of Alloy Layer
Synthesis, Optoelectronic Properties of a New Photochromic Diarylethene Bearing Benzothienyl and Malononitrile Group
Synthesis, Optoelectronic Property and Application in Optical Memory of a Novel Type Diarylethene Based on a Six Unit
Sythesis of a Novel Unsymmetrical Photochromic Diarylethene Compound Bearing a Six-Membered Aryl Unit
Photochromism and Optical Storage of a Novel Unsymmetrical Diarylethene Based on Pyrazole and Benzofuran
Synthesis, Properties and Application in Optical Memory of a Photochromic Diarylethene Based on Benzene Ring
Photochromism of a New Unsymmetrical Diarylethene Bearing both Thiazole and a Methoxyl Group
Synthesis,Properties and Application in Optical Memory of a Novel Photochromic Diarylethene Bearing a Six-Membered Aryl Unit
The Influence of Seismic Motion Input Direction and Damping on the Dynamic Analysis of Mega Steel-Frame Structure
Study on Laser Welding Technology of Diamond Core Drill Bit
Study on Earthquake Response Analysis of Reinforced Concrete Masonry Structure
Preparation and Electromagnetic Properties of Poly(o-Toluidine)-BaAl2Fe10O19 Composites
Wear and Mechanical Properties of Fe-28Al and Fe-28Al-10Ti Alloys
Synthesis and Characterization of Polymethylsiloxane with Pendant Fluorocarbon Side Chains
Research on Defect Detection Technology of C/C Composite
Robust Adaptive Control for Gun Control System of Tank
Synthesis and Light-Emtting Diodes Properties of Two New Fluorene Based Copolymers
Water-Based UV-Curable Polyurethane Based on Wheat Straw Lignin Obtained by Ethanol Extraction
Production of Nanosilica from Iron Tailing and Characterization
Preparation and Characterization of Hydrophilic PVDF Membrane via Graft Modification by Maleic Anhydride
Study on the Compression Performance of CFRP Confined GFRP Short Column
The Configuration and Evolution of Ti-Si-N Island on TiN(001) Surface: Ab Initio Study
The Influence of Si Content on the Microstructure of Rapidly Solidified AlMnSi Foil
Sintering Process of Mullite- Corundum Insulation Material with Nano Crystals
Synergistic Effect between Montmorillonite Intercalated by Melamine and Intumescent Flame Retardant (IFR) on Polypropylene
The Oxidation of Co-5Al Alloys in 1 Atm of Pure O2 at 700 and 800 OC
Study on Microorganisms’ Immobilization by Different Support Materials in the UASB System
Preparation of TiO2 -Pillared Montmorillonite as Application to the Control of Blue Green Algae Growth in Eutrophic Water
The Enhanced H2S Sensing Behavior of Ag-Doped Porous SnO2 Nanopowders Prepared by Template Method
Solvothermal Synthesis of the SnO2 Nanomaterial for Highly Reversible Lithium Storage
Optimum Gate Design of the Injection Mold on Plastic Air Intake Manifold of Engine Based on CAE Technique
The Non-Combustibility of PTFE Fabric
Studies on Diamond Brazing Process (Part one)
Research and Development of a New Grouting Material for Blast Furnace
Self Adaptive Modeling and Deposited Metal Property of Rapid GMAW Forming
Synthesis of VO2(A) Nanostructures by a Hydrothermal Method and their Transition to VO2(M)
Synthesis, Characterization and Optical Properties Based on a Novel Re(I) Emitter with Bulky Building Block
The Rockburst Experiment Usage of Similar Material and the Mechanism of the Energy Releasing
Pultrusion Technology Optimization for Hybrid Fiber Composites Based on DSC and Mechanical Property Testing
Synthesis and Characterization of Chitosan Based Ultraviolet Absorber with Groups of Benzophenone
Study on Formation and Exfoliation Mechanism of Alloy TP347H’s Oxide Scale in Supercritical Boiler
The Thermo-Mechanics Coupled Model of Polycrystalline Aggregates Based on Plastic Slip System in Crystals and their Interfaces
Structure and Properties of Calcium-Magnesium-Silicate Ceramic Fiber with Nd2O3
Study of Construction Management Maturity Model
The Finite Element Analysis of Effect Factor about the Shear Behavior of Cold-Formed Steel Composite Wall
Ultrafine a-Fe2O3 Nanoparticles: Facile Synthesis, Characterization and their Catalytic Activity on Ammonium Perchlorate
Synthesis and Crystal Structure of a New 2D Coordination Polymer [Ce(3,4-pydc)2]•H2O(3,4-pydc = pyridine-3,4-dicarboxylate)
Shearer Shaft Roundness Error of Signal Processing
Sintering Kinetics of Self-Lubricating Ti-48%Al-2%Nb-2%Cr Alloys with Fluoride Lubricants
Proportion Design of Concrete with Gravel-Crushed Proto-Machine-Made Sand
The Effects of Hydrothermal Time on the Microstructure of Hollow Sphere Boehmite
The Influence of Humidity on Burning Perfectibility of Molded Combustible Cartridge Case
Study Situation and Key Technology of Mobile Humanoid Robot
Study on the Shear Strength Parameters for Municipal Solid Waste with Higher Content of Organic Matter
Study on Properties of Collagen/Chitosan Composite at Different Mass Ratios
Thermodynamic Calculation of Al-Cu Eutectic Alloy with Microstructure Simulation Using Phase Field Method
Research on Combined Lifting Conceptual Design for Large-Scale Ship
Research on the Synthesis of Titanium Nitride by Carbothermal Reduction Nitriding with Anatase and Flake Graphite
Replacement of Cement with Rice Husk Ash in Concrete
Preparation of Glass Ceramic Made from Fly Ash
Preparation and Features of Nano-ZrO2 / HA Coating on Surface of Titanium Materials in Dental-Implant
Relationship between Microstructures and Mechanical Properties of Ti-6Al-4V Alloy in Centrifugal Casting
The Study of Green Evaluation Support System in Manufacturing Process Based on Multi Agent
Study of Anode Modification and Bias Voltage Treatment on Organic Solar Cells with Rubrene/ C60 Heterojunctions
The Addition of a Nano-SiO2 on the Tribological Properties of PTFE Composite
Quick Spherodizing in GCr15 Steel by Mechanism of Divorced Eutectoid
Process Characterization of 40Cr Steel Roller by Laser Surface Alloying with Rare Earths Oxide Y2O3
Preparation of Pt Colloids via a Wet-Chemical Method for Methanol Sensor
Synthesis and Characterization of Nanosized Phpsphor SrS:Eu2+,Sm3+ by a Hydrothermal Process
Test Research on Preparation of New Wall Material with Iron Tailings in Tangshan Area
Thermally Stable Blue NaBaPO4: Eu2+ Phosphor Synthesized by Combustion Method
The Research on Preparation and Application of a Silicon-Based Efficient Coagulant
Synthesis and Luminescence Properties of Red Emitting Phosphors Na3CaB5O10:Eu3+
Yellow-Orange Upconversion Luminescence in NaYF4:Er3+, Yb3+ Phosphor Synthesized by Microwave Combustion Method
Study on Surface Cermets Reinforced by VC Particles Produced in Situ
Recycling of Pultrusion Production Waste into Innovative Concrete-Polymer Composite Solutions
Study on the Microstructure and Property of Manganese Steel Composites Strengthened by Ceramic
Structural Stability and Mechanical Properties of Ni Nanowires under Different Orientation and Size
The Relationship between the Biodiversity Conservation and the Traditional Beliefs of the Native People in Dalai Lake Biosphere Reserve
Study on Mechanical Property of Al2O3-Based Composite Ceramics Liner of Heavy-Medium Cyclone
The Comparison on Morphology and Histology of the Carassius auratus, Pelophylax nigromaculata and Oryctolagus cuniculus Lens
Progress of Research on Chitosan
Study on Reducing ASR Expansion in Concrete Prepared with Iron Ore Tailings Sand
Research on Fatigue Life of the Casting Crane’s Girder
Study of Ship Propeller Cut and Effecting on Main Engine Running Parameters
Synthesis Aligned ZnS Nanocone and its Photoluminescence
Surface Photovoltage: an Efficient Tool of Evaluation of Photocatalytical Activity of Materials
Simplied Calculation Method for Reinforcement of Rectangular Sectional Flexural Members Considering Crack Width
Research of Plasma Clad Al2O3 Coating
The Analysis on Causes of Rupture for a Sucker Rod Made of 20CrMo Alloy
Study on the Application of the New Rock Drifting Technology in Zhangcun Colliery
Study on Control Technology of Transverse Corner Cracks on CC Slab for Automobile Frame Steel Plate
The Tensile Properties of Glass Fiber Reinforced ABS Composites Filled with SiO2
The Mechanical and Tribological Properties of a Polyurethane Composite Filled with CNT
The Staged Construction Plan of Free Way Asphalt Pavement
Preparation of Microcrystalline Cellulose from Cotton Linter Ethanol Pulp
Study on Rutting Resistance of Polyacrylonitrile Fiber Asphalt Mixture
Research on the Load to Ground on Missile Erection and Launching
Study on Cu-Based Catalysts for Synthesis of Indole
Synthesis and Characterization of Ultrafine Nanocrystalline Ti-Al Nanoparticles
The Experiment Study on Making Ultrafine Superfine Nickel Powder by N2H4–KHB Reduction and H2 Reduction
The Die Design and Implementation of the Path Trail about Step-by-Step Forming Section
Solidification Simulation of Huge Rectangular Ingot by Different Intensive Cooling
Study on the Method of Adjustment Skateboard by Dial Indicator to Turning Cone
Oxidation Behavior of 2Cr12NiMoWV Steel in High-Temperature and High- Pressure Water Vapor
Synthesis and Characterization of LiNi0.4Co0.2Mn0.4O2 Cathode Material via Urea Co-Precipitation Method
Study on Practical Calculation Equation of Concrete Strength Criterion under Tension Condition
The Random Calculation Model of Chloride Ion Concentration in Concrete
The Effect on Heterogeneous Nucleation of Solute Segregation
Water Modelling on the Effect of Trapezoidal Nozzle on Vortex during Teeming in Ladle
Thermo-Mechanical Behavior of Fiber Reinforced MMC
Permeability Test Method of Concrete Member under Uniaxial Tension Stress
Static Recrystallization of Magnesium Alloy during TRC-HC Deformation Followed by Annealing
Preparation of Cationic Cellulose Obtained from Wood Pulp Using the Microwave
The Design of Automatic Test System of High Speed PCM Signals
Study on the Preparation of TiN Nano-Particles in a Solidified Low Alloy Steel
Properties and Morphology of Damping Composite Consisting of Polyester-Type Polyurethane/Epoxy Resin
Research Advance in Harmful Effects and Removal of Impurity Fe from Al and Al Alloys
The Study on Pulping and Papermaking Performance of Banana Stem and Leaf
The Study on the Bond Strength between Gunning Formed Lining and Surface of Stave with Anchors
Research of Mechanical Properties of Ni-Ti-Nb Alloys on Low Temperature and Restriction Behavior
Control of Nitrogen Loss during Co-Composting of Banana Stems with Chicken Manure
Study of Substrate Induced Deep Level Defects in Bulk GaN Layers Grown by Molecular Beam Epitaxy Using Deep Level Transient Spectroscopy
Research on Deformation Error of Links of Parallel Robot
Studies on Cutting Forces of High Volume Fraction SiCp/Al Composites with Ultrasonic Vibration High Speed Milling
Preparation of Novel Series of UV Dual Curable Polyurethane-Modified Epoxy Monoacrylates and their Films Properties
Research on the Extraction of Collagen from Scales of Tilapia
Research on New Varying Gear Ratio System
The Thermal and Di-Electric Properties of a Silicone-Based Thermal Pad
The Controlled Synthesis of Single-Crystalline Cd(OH)2 Nanoparticles with Different Morphologies
Study on the Use of Rhodamine Doped Nanocomposite for Latent Fingerprint Detection
The Error Model Analysis in Wireless Network Base on the Network Simulator Tool
The Study on the Early Age Cracking due to the Addition of Silica Fume into Concrete and the Trouble-Shooting Strategy
Study on Cost Modeling Based on Feature Mapping Technology
Precise-Micro PECM System and its Applications Combining Synchronizing Ultrasonical Vibration
Study on the Preparation of Cu/n-SiO2 Composite Particles by Mechanical Milling
Preparation of Graphene/CdS-Nanobelt Nanocomposites
Synthesis and Photocatalytic Properties of Fe-Doped TiO2 Nanobelts
Modelling of Cyclic Plasticity and Viscoplasticity of Directionally Solified DZ125 Superalloy: Part I: Estimating the Parameters of Chaboche Constitutive Equations
Chapter 1: Materials Properties
Combustion Synthesis and Luminescence Properties of NaY1-XTbX(WO4)2 Novel Green Phosphors
Optimization of the Synthesis of Er-Y-Ba-Na Quaternary Fluoride up-Conversion Phosphor and Luminescence Properties
Composition and Microstructure of a Natural Nano-Structure Mineral: Six-Ring Rock
Evaluation of Permeability of Porous Concrete
Interfacial Behaviors in SiC Fiber Reinforced Titanium Matrix Composites during Thermal Exposure
Enhanced Infrared Normal Spectral Emissivity of Microstructured Silicon at 100 to 200°C
Aluminate Green Phosphor with Small Particle Size Used for PDP via Co-Precipitation Method
Investigation of the Corrosion Resistance of Bainitic Steel
Effects of Metallic Ions on Photoluminescence Properties of CdSe/PAMAM Nanocomposites and their Application in Fingerprint Detection
Energy Conservation Study on Integrated Thermal Insulation Buildings Made of Glazed Hollow Beads Mortar
Electrochemical Characterization of Metal Oxynitride Thin Film as New Lithium Storage Materials
Cases Analysis of Nonconformity in Ultrasonic Flaw Detection for Steel Plates
Fabrication of Superhydrophobic Surfaces on Copper Foil with Stearic Acid
Microstructures and Mechanical Properties of Mg-6Al-1Zn-xSn (x=0.5, 1, 2 and 3.5 Wt%) Alloys during Solution Treatment at 420°C
Differential Scanning Calorimetry (DSC) Analysis of Abaca Fibre (Musa Textile Nee) Reinforced High Impact Polystyrene (HIPS) Composites
Analysis on the Cause of Longitudinal Crack on the Hot-Rolled Ribbed Bar Surface
Influence of Temperature on the Absorption Behaviour between Cement and Asphalt Emulsion in CA Mortar
Hydration Kinetics of Aluminate Cement Containing Magnesium Aluminate Spinel
In Situ Synthesis Process for TiC Whisker Toughening Al2O3-Based Ceramic Cutting Tool Composite
Finite Element Analysis of Interfacial Stress of Mg-Baced Composites Reinforced with Short Fiber
Experimental Study on the Fundamental Characteristics of Recycled Concrete
Microstructure and Properties of High Carbon Equivalent Gray Cast Iron Modified by Rare Earth
Influence of MgO on Properties and Microstructure of Mullite Ceramics Synthesized from Coal Fly Ash
Effects of Mixed RE on Die-Casting Microstructures and Properties of Commercial Mg Alloy
Magnetostriction of Epoxy-Bonded Tb0.22Dy0.48Pr0.3(Fe0.9B0.1)1.93 Composites
A Study of Preference Relation for the Mould Bidding Strategy Based on Rough Set
Enhancing Electrochromic Property of 1,4-Di(thiophen-3-Yl)benzene by Copolymerization with Pyrene
Microstructure Refinement in Non-Quenched and Tempered Vanadium-Nitrogen Steel
Influence of Temperature Rise during Finishing Rolling on the Mechanical Properties of T8 Cord Steel
Influence of Hydrogen on the Plasmas Nitriding Process of 35CrMo Steel
Effect of Yttrium and Magnesium Segregation on Microstructure and Mechanical Properties of Heavy Section Ductile Iron Castings
Numerical Simulation of Flowage and Bath Surface Behavior in Continuous Casting Mold with Electromagnetic Brake
Novel Optical Fiber Gas Sensing System Based on FBG Filtering
A Method for Lamping Atoms into Particles in Particle Dynamic Method
Efficient Synthesis, Photochromism and Application of a Photochromic Diarylethene Bearing a Benzene Unit
Efficient Synthesis, Photochromism and Holographic Optical Recording of a Photochromic Diarylethene with a Isoxazole Unit
Effects of Rare Earth Dopants on Crystal Structures of Bismuth Molybdate Catalysts
A Novel Electron Paramagnetic Resonance Phenomenon in a Barium Stronium Titanate Ceramic
Control of Nitrogen in Al-Killed Steel by Converter Flow
Annealing on the Electrical and Dielectric Properties of Barium Strontium Titanate
New Digital Method of Reverse Engineering about Free from Surface
Efficient Synthesis and Properties of a Photochromic Diarylethene Bearing Thiophene and Isoxazole Moieties
Electro-Generation of 2, 3, 5, 6-TCP in Zn, Ni,P-mSA/mCS Bipolar Membrane Equipped Electrolysis Cell
Deflection Test on CFST Arch Bridge with CFRP Slings
Model Study about the Influence of Superheat on Macrosegregation Formation in Continuously Cast Bloom of Special Steel
Air-Water Interfacial Film of Zirconia and its Heat-Treatment
Effects of Milling Time and Annealing Schedule on Mechanical Activation Synthesis of Brownmillerite Structural Ca2Fe2O5
Microstructures of In Situ Synthesized ZrB2/AZ91 Magnesium Matrix Composite Synthesized by a New Method of Direct Melt Reaction
OH-related Infrared Absorption Spectra in Silicate Glasses
Effect of Hole Distance and Hole Number on Bubble Behavior during Gas Injection with Multi-Hole Orifices
Experiment on Treating the Dying Wastewater with Blast-Furnace Ash and Fenton Reagent
Characterization of Electrochemically Synthesized Pani on Graphite Electrode Use EIS
A Novel CuO-TiO2 Composite Photocatalyst and its Degradation of Methyl Orange under UV Irradiation
A New Photochromic Diarylethene for Optical Storage
Effects of Polypropylene Fiber on Shrinkage of Masonry Cement Mortar
Analysis of CTOD Test for Proving Rings of Large-Scale Fully-Welded Ball Valves
Numerical Simulation of Interaction between Coal Derrick and Foundation in Freeze - Thaw Process
Methods and Equipment of Vacuum and Electromagnetism Suspending Distillation for Fine of Non-Ferrous Metals
A Simple Method of Cyclization of the 2'-Hydroxychalcone with Polystyrene-Pyridine Resine under Mild Conditions
Morphology and Electrical Properties of Nano-Sized LiFePO4 Cathode Materials
Development and Application of Cold-Formed Steel Structure Dwelling System
Influence of La and Ce on Microstructure and Properties of Cu-Cr-Zr Alloy
Optimization Design of Signal Source Based on FPGA
High Overload Penetration Test and Analysis of the Multi-Layer Steel Target
Effects of Gadolinium on Aging Behavior and Mechanical Properties of Mg-5Y-3Nd-Zr Alloy
Long-Term Performance Research on Reinforced Concreted Beams with Pre-Stressed CFRP Plate
Effects of Synthesis-Solvent on Characteristics of Poly(N-Isopropylacrylamide) Hydrogels Synthesized by Frontal Polymerization
Development and Design of Coal Gangue Concrete Filling Material
Effects of Various Plasticizers on the Moisture Sorption and Mechanical Properties of Gelatin-Chitosan Composite Films
Influence of Temperature and Relative Humidity on Perm-Selectivity of PET Packaging Film
APCVD Deposition of Si Film on SiO2 Patterned Si (111) Substrates for Solar Cells
Bending Properties of Three-Layer Biaxial Weft Knitted Fabric Reinforced Composite Materials
Development and Evaluation of a High-Strength and Anti-High Temperature Pre-Crosslinking Gel
DSC and TEM Study of Al-Cu-Mg-Ag Alloy Ageing at Low and Elevated Temperature
Measuring Methods of Cable Tension in Cable-Stayed Bridges
Kinetics of Reductive Dechlorination of DDT in Soil with Zero-Valent Iron
Evaluation of Optical Path Designing on 4x4 Cm2 Er3+/Yb3+ Doped Phosphate Glass Waveguide Substrate
Load-Carrying Capacity Analysis for Sinusoidal Surfaces Hydrodynamic Bearing
Control of Cold Welding Cracks in 30CrMnSi Steel by Welding with Trailing Impacting and Rolling
Crystallization Kinetics of ZrCuAlSiY Bulk Metallic Glass
Influence of Limestone Powder on Immobilization of Chlorine Ion of Portland Cement
Based on CSP Technics, the Experimental Research of Rare Earth Steel Hot-Rolled Deformation Behaviors
New Method of Spherical Surface Defect Detection Based on Machine Vision
In Situ Template Synthesis Titania Nanotube Array Films on Aluminum Plate
Development of Electromagnetic Swirling Flow in Immersion Nozzle in Continuous Casting Process of Steel
High Polaried Transmission Effects for Double-Layer Metallic Grating Films on GaN Substrate
Effect of Thermomechanical Parameters on the Microstructure and Retained Austenite Characteristics in a Hot-Rolled TRIP Steel
Fabrication and Luminescent Properties of Translucent Ce3+:Lu2SiO5 Ceramics by Spark Plasma Sintering
Ab Initio Calculation of (001) TiAl3/Al Interface
Investigation of Very High Cycle Fatigue Behavior of TC17 Alloy
Microstructures and Properties of Laser Cladding Composite Coating of Nano-Y2O3/Co-Based Alloys
First-Principles Calculations for Electronic Structures of Flourine-Doped ZnO
Influence of the Concentration of La High Doping on Conduction of ZnO
A New Approach to Solving Reliability Optimization Design of Gear Box
Materials and Fabrication Issues of Micro V-Groove for Optoelectronics Packaging
Analysis of the Dry Mortar Produced with Iron Tailings
Numerical Simulation of Canned Hot-Extrusion Process of Mo Powder
Fabrication of Al/SiC Nanocomposite Powders via In Situ Powder Metallurgy Method
Dynamic Analysis of Piezoelectric Smart Structures
Optimization of Steel A20402'Parameters under Pulse Electric Field
Microstructure, Mechanical and Shielding Properties of Fe67.5Ni23.5B9 Coating / 321 Stainless Steel Laminated Composite by the Air-Plasma Spraying Procedure
Effects of Ultrasonic on Ability of Learning and Memory in Kunming Mice
A Study on Dynamics of 2-PRR Parallel Machine Tool Based on the Lagrange Equation
Effects of Microstructure and Mechanics Performance of Laser Clad with Different Base
An Efficient Synthesis of 5-Arylidene Barbiuric and Thiobarbituric Acids Catalyzed by Mg(NTf2)2 in Water
Application and Research of Superfine Wood Powder Disintegrator with Multi- Granularity Based on AR Technology
Natural Convection Heat Transfer of the PCM Microcapsule Slurry for a Solid Phase State in a Horizontal Rectangular Enclosure
Microwave Assisted Synthesis of ZnO Calthrop-Like Nanostructures in Ionic-Liquid
Microstructure and Corrosion Resistant Property Research of Super 304H and TP347H Heat-Resistant Steel Welding Joint
Dielectric Properties of Carbon-Materials-Filled Composites Characterized by Terahertz Time-Domain Spectroscopy
Controlled Fabrication and Properties of Ce0.5Zr0.5O 2 Solid Solutions
Effect of Rare Earth Nano-Oxides on Sintering and Crystallization of Fused Quartz Ceramic Materials
Effect of Substrates on the Characteristics of Silicon Carbide Deposited from Methyltrichlorosilane
Finite Element Analysis on Temperature Field of Laser Brazing
Enhanced Photocatalytic Activity of TiO2 by (Tetracarboxyphthalocyaninatio) Cobalt (II)
Alloying Element Nickel Influence on Microstructure and Properties of Weathering Steels
Analysis on Structural Property and Seismic Performance of the P’ai-Lou Gateways in Xi'an Great Mosque
Decolorization of Methylene Blue Dye Wastewater by Fenton’s Reagent
Electron Transport of Right-Angle Graphene Nanoribbons
Coherent Phonon in Single-Walled Carbon Nanotubes by Using a few-Cycle Pulse Laser
G12V190 Type Diesel Engine Exhaust Muffler Design Based on Transfer Matrix Method
Influence of Ultrasonic Vibration on Preparation for Semi-Solid A356 Alloy
Martensitic Transformation in a Low-Alloy Ultra-High-Strength Steel
Critical Cooling Rate and Design of Mould Cooling System for Hot Forming of High-Strength Sheet
Alloy Design and Practice of High Carbon Alloy Steels with Ultra-Fine Carbide
Microwave Hydrothermal Synthesis of ZrSiO4 Nano-Powders
Experimental Study on the Seismic Performance of Composite Shear Wall Structure with Thermal-Insulation Wall Form
Chemically-Induced Graft Copolymerization of Diethylenetriamine onto Bagasse Celluloses
Experimental Study and Finite Element Analysis of the Seismic Behaviors for Steel Fiber Reinforced High-Strength Concrete Frame Exterior Joints
Effects of Occupation of the Cages on Thermodynamic Stability of SI CO2 Clathrate Hydrate
Influence of Heat Treatment on the Structure and Performance of ATP and its Catalyzer
Mechanical Properties and Applications of Carbon Nanotubes
Effect on Electroless Nickel Coating on Magnesium Alloy by Nickel Electroless Plating Parameters
CuInS2 Thin Films Obtained by Spray Pyrolysis Deposition Using Sodium Dodecyl Sulfate Additive in Precursors Solution
Effect of Die-Swell Ratio on Polyacrylonitrile As-Spun Fiber Formation
A Theoretic Study on Cam-Clamping Device
Effects of Computational Parameters on Solidification Structures Simulated with Phase-Field Method for a Ni-Cu Binary Alloy
Infrared Thermographic Diagnosis Mechnism for Fault Detection of Ball Bearing under Dynamic Loading Conditions
From Layered Ni(OH)2 Thin Films to Ni(so4)0.3(OH)1.4 Nanobelts through so42- Inserting in Colloid-Based Route
A General Sonochemical Approach to Rapid Synthesis of 1D Single-Crystalline MSn(OH)6 (M=Ba, Ca, Sr) Nanostructures
The Sonochemical Fabrication for the CaCO3 Nanocrystals with Different Morphologies
Design Optimization of the Aerial Lift Boom through the Finite-Element Analysis (FEA)
Determination of Ge Fraction and Carrier Concentration in Si1-XGex/Si by Capacitance-Voltage Method
Mechanical and Tribological Properties of Nylon 1212 Modified with Brown Corundum Ash and Solid Lubricants
Chapter 2: Metal Casting Processes and Equipment
A Numerical Study on the Large Deformations of Polymer Foams with Spherical Pores
Study on the Finite Element Method for Three-Dimensional Static Property of Polyurethane Vibration Isolators
Characterization of Ni and Ni-Co Alloy Coatings Prepared by Pulse Current Electroplating
Experimental Study of the Packaging Failure for Optical Fiber Arrays
The Morphology of SiOx Coated PET Film by Ultrasonic Atomic Force Microscopy and Barrier Properties
Springback Simulation in Stretch Bending of Aluminum Extrusions Using Static Implicit and Dynamic Explicit FE Codes
Preparation and Characterization of Superhydrophobic Polypropylene Surface with Excellent Self-Cleaning Property
Anglicizing Modern High-Rise Building Modeling Design Technique
The Effect of Alkaline Slurry on Low-K Film
Impact of Process Parameters on the Auto Claw-Pole Thixoforming Process
Effect of Floating Die on Tooth Filling of Spur Gear Forging
Effect of Mandrel Exchange on the Precision Forging of Spur Gear
Surface Characteristic of Wheat Straw Treated with Plasma
Formation Mechanism of Linear Explosive Formed Penetrator by Midpoint Initiating Manner
Study on Microstructure and Performance of Bead-on-Plate Weld Metal on 21CrMoV5.11 Steel Continuous Casting Roll by Submerged-Arc Overlaying
Design and Simulation of Molded Interconnect Devices with Two Shot Molding
The Analysis of Tube Spinning Process Parameters on Workpiece Defects
Effect of Acid Treatment on Surface Morphology and Strength of Float Glass under Ultrasonic Wave
Microstructure and Properties of Laser Cladding Co-Based Alloy Coatings
Influence of Inhibition Layer on Adhesion of a Galvanized High Al Dual Phase Steel
Synthesis and Character of Amphiphobic Calcium Carbonate Nanoparticles In Situ
An Alkaline Hydrothermal Method to Synthesize Super-Hydrophobic Wood
In Situ Formation of ZrO2-Y2O3-Containing Ceramic Coating on Magnesium Alloy by Plasma Electrolytic Oxidation
Chapter 3: Forming and Shaping Processes and Equipment
Research about the Crackle-Simulated Coating Technology Applied in the Rice-Straw Board Furniture Surface Decorating
Formability of AZ31B Magnesium Alloy Sheet in Hydro-Bugling by Pulsating Hydraulic Pressure
Effects of the Low Frequency Electromagnetic Field on the Centerline Macrosegregation of 7075 Aluminum Ingots
Effect of Different Modified Mechanism on Mechanical and Cutting Properties of WC-Co(Ni)
Design and Optimization of Technology and Structure Parameters for Sheet Metal Drawing by Orthogonal Experiment
Microstructures and Mechanical Properties of the Mg-5Y- MM Alloys
Effects of Asymmetric Bending on Wear of Rolls in a Six-High Cold Rolling Mill
Analysis of Forward Spinning for Aluminium Alloy Tube
On Formability of MoNiCr Alloy
Dynamic Instability of Spatial Structures under Typical Wind Flow
Proton Transfer in Proton Exchange Membrane Based on RDF
Preparation and Processing of PZT Thin Film by Liquid Mist Microwave Plasma Enhanced Chemical Vapour Deposition
A Feasibility Study on Increasing Surface Hardness of Austenitic Stainless Steels by Pack Co-Deposition of N and Cr
Chapter 4: Material Removal Processes and Machines
Management of Bio-Engineering Equipment - Take Ventilation and Mechanical Agitation Fermenter for Example
Overload Control of Supersonic Missile System
Modeling and Dynamic Simulation of Tracked Vehicle in Vortex
A Steering Wheel System and Controller for the Driving Simulator
Supersonic Missile Control with PI Sliding Mode Method
Analysis of Characteristics of Potential Mud-Rock Flow in Huyu Valley
Consider the Effect of the Variation of Underground Water Level to the Superstructure with the Pile Foundation in Different Burying Depth
Construction of Customer Knowledge Management Platform Based on TRIZ
Micro-Hole Machined by Electrochemical Discharge Machining (ECDM) with High Speed Rotating Cathode
Study on Straight Edge Cutter for Processing Circular Arc Tooth Belt Pulley
Confined Buckling Analysis of a Viscoelastic Ring Subjected to Constant Temperature Difference
Experimental Research on the Screening Efficiency of Particle Impact Drilling Separation System
The Study and Realization of Online Submission and Peer Review System Based on AOP
An Improved Active Queue Management Algorithm Based on Nonlinear Smoothing
To Simulate the Flow Field of Jet Pumps of Plane Model by Using Monte Carlo Method
Role of Shear Strain for a General Modeling of Magnetostrictive Film-Substrate System
Different Management Goal of the Coal Enterprise Marketing Strategy
Decision Model Research of Production Model Based on Fuzzy Theory
The Application of Low-Frequency and Low-Power Ultrasound Algae Removal Technology in Pengxi River in Three Gorges Area
Research on Diamond Polishing Process Based on Rough Set
Optimization of Chlorella pyrenoidosa Removal by Low Frequency Ultrasonic Irradiation Using Response Surface Design
Experimental Research on Impact Force and Erosion Effect of Different Hydraulic Pressure
Deformation Characteristics Research of Large Span Aqueduct under Impounding Conditions
Chapter 5: Joining Processes and Equipment
Study on the Brazing Technology and Mechanical Properties Using bmp7 Filler Metal
Fatigue Behavior of the Low-Strength Steel Welded Joints Treated by TIG Dressing and Ultrasonic Peening Combined Method
The Impact of LPG Storage Tank Steel Specimen Fracture Analysis of Welded Joints
Research on the Effect of Ultrasonic Impact Peening on the Fatigue Property of 7075-T651 Aluminum Alloy
Welding Thermo Cycle and HAZ Softening of CT80 Butt Weld Joint
Numerical Simulation of Welding Residual Stress Considering Phase Transformation Effects
Research on Ultra-High Cycle Fatigue Property of 45 Steel
Study on Microstructure and Performance of Bonding-FSSW Hybrid Joints of AZ31 Magnesium Alloy
Effect of Ar-N2 Mixed Gas on Morphology and Microstructure of Type 316L Stainless Steel TIG Weld Metal
Tensile Property for Friction Welded Aluminum Alloy 7075-T6 and 7075-T6
Mechanical Property of Friction Stir Welded Retardant Magnesium Alloy Joint
Study on DC Double Pulse MIG Welding of Automobile Aluminum Alloy
A Study of Temper Bead Technique on A508 Steel Welds
Chapter 6: Surface Technology
Leveraging Heterogeneity Make Resource Location Efficient in Peer-to-Peer Networks
Microstructure and Damping Property of the Composite Discontinuous NiTi SMA Thin Films Deposited on PZT Substrate
Structural and Optical Properties of Zn1-XCoXO Thin Films Fabricated by Laser Molecular Beam Epitaxy
Recent Developments in Microextraction Related Techniques for Trace Environmental Analysis
Growth and Field Emission Properties of the Carbon Complex Films
Modeling and Simulation Study on the Complex Seepage Mechanism of Porous Electrode for a Proton Exchange Membrane Fuel Cell
Fabrication and Photocatalytic Activity of ZnO-TiO2 Nanofibers
Researches on the Treatment of the Row Hemp
Experimental Study of Heat Pipe Exchanger for High Power LED Cooling System
Study on Properties of Bast Fibers
The Dispersion of CNT and the Conductive Property of PA6/MWNTs Nanofiber Filaments by Electrospinning
Study on the Application of Fringe Curling in Knitwear
Effects of Temperature on the Impedance of PEM Fuel Cell
Microstructure of CrN-Based Nano Composite Solid Lubrication Films
Growth and Application of High Quality ZnO Films Grown on Diamond Substrates
Preparation and Study of Strong Magnetoelectric Coupling on Multiferroic BaTiO3/La0.7Sr0.3MnO3 Bilayer Heterostructure
Investigations on Properties of PE/PET Bicomponent Spunbonded Nonwovens
Ground Movement during Concrete Pipe Piles Jacking in Silt Deposit
Establishment of Ink Penetration Model and the Calculation of Penetration Depth inside Paper
Effects of the Velocity of Ink Distributing Roller on Ink Tack Value
Effect of Thermal Load on Mechanical Properties of Ni/YSZ Anode Support Micro Tubular Solid Oxide Fuel Cell
Gray Cluster Analysis on Thermal-Moisture Comfort of Bamboo Fiber Socks
Pb(II)-Imprinted Polymer Prepared by Graft Copolymerization of Acrylic Acid onto Cellulose
Thickness Dependence of Electrical Properties in Poly(vinylidene Fluoride Trifluoroethylene) Copolymer Thin Films
Definition of Cohesive Zone in COREX Melter Gasifier Using Image Processing Method
Synthesis of NiCr Nano Oxides as Anode Electrocatalysts for Direct Methanol Fuel Cell
Chapter 7: Common Aspects of Manufacturing
Research Progress of Stress Superimposing Method for Residual Stress Determination
Strength and Finite Element Analysis of the Boom System of Truck-Mounted Concrete Pump
Research Progress and Perspective of Reduction Removal of Phosphorus in Steel Slag
Study on the Separation of Waste Polyester-Cotton Fiber with Dilute Acid
Cracking Mechanism of RCC Dam Surface and Prevention Method
Numerical Simulation of Fracture Process of Three-Point Bending Beam of Concrete Based on Modified Mazars Model
Effect of Ultrasonic Vibration on Friction and Wear Properties of GCr15/45# Steel Frictional Pairs under Oil Lubrication
Analysis of a New Magnetic Bearing for Magnetic Levitation Stages
Numerical Simulation of Temperature Field of Direct Laser Metal Deposition Shaping Process of Titanium Alloys
Research on the Dynamic Performance and Mechanical Model of the Single Rod MRD without Accumulator
ADAMS MATLAB Co-Simulation of Dynamics Parallel Manipulator
Failure Analysis of Drill Collar Box Fracture
Study on the Impact of Wind Load on Large Crawler Crane Typical Truss Structure
Reliablity Analysis of Large-Span Undergroud Cavern Stability in Jinchuan Mine
Effect of White Noise and Dichotomous Noise in a Bistable System
Role of Time Delay and Noise Color in Bistable System with Dichotomous Noise
A Continuous Fluxless Purification Technique for Mg Scrap Melt
Acoustic Property Prediction of an Automobile Air Filter with Acoustical BEM
Research on Long-Span Old Bridge’s Dynamic Reliability under Vehicular Load
Towards Simulation of Fresh Granular-Cement Paste Material Behavior
Consistency Assessment Method for Granular- Cement Paste Systems
The Research of Angle Measurement between Cone and Support Rods Located at ICF Target
Study on the Flutter Model of the Imaging Quality of TDICCD Space Camera
Synchronization Analysis of the Double Exciting Motors in Nonlinear Vibration System Based on Reaching Law
Identify for Scroll Compressor Noise Using Vibration Signal Based on Neural Network
Study of Flotation Deinking Efficiency of Old Newspaper and Old Magazine
Numerical Simulation and Analysis of Hydraulic Excitation System Based on Water Hammer by the Method of Characteristics
Numerical Simulation and Experimental Analysis of an Active Hydraulic Excitation System Based on Pulsating Flow
The Investigation of the Influence of Dynamics Parameters on the Friction-Induced Self-Excited Vibration
Effect of Pre-Strain and Roller Working on Torsional Fatigue Properties of a Structural Steel
The Research of the Influence of Damping on Automonile Brake Groan
Potential Routes for Recycling and Reuse of Silicon Kerf
Method to Construct Elementary Dependent Function Based on Weights of Characteristics
An Approach to Real Exhibition of the Yarn Texture in the Simulation of the Fabric Appearance
AR Bispectrum Characteristics of Block Forming Machine’s Vibration Driven by Hydraulic Exciter
Numerical Simulation of Double-Deck Metal Cylindrical Tube Crashed under Inside-Explosive Loading
Grinding Wheel Carriage Mode Analysis of Vertical Glass Edging Machine
The Effects of Rolling and Annealing on the High Speed Impact Deformation Behavior of Mg-3%Li-1%Nd Alloy
Recovery Methods of Germanium
Research on Fault Diagnosis for Rotating Machinery Vibration of Aero-Engine Based on Wavelet Transformation and Probabilistic Neural Network
Effect of Oxygen Partial Pressure and Temperature on Liquidus for the CaO-SiO2-FeOx-Al2O3 System
On the Tensile Stress and Damage Accumulation during Equal Channel Angular Extrusion
Thermodynamic Study on Production of Fe-Si–Mn Alloy from Adjusted Converter Slag
Dynamic Performance of the Bearing-Rotor System in the Ultra-High Speed Electric Spindle with a Additional Supporting System Make up of the Permanent Magnetic Bearings
Improving Design of Muffler Based on Three-Dimension Numerical Calculation of Fluid and Sound Field
Study on Seismic Response Reduction of a Long-Span Cable-Stayed Bridge by Adding Viscous Dampers at the Different Positions
The Limitation of Evaluating Thermal Shock Resistance of Al2O3-SiO2 Refractory by Measuring Strength Loss Rate
Study of the Multiaxial Fatigue Life Influencing Factors Based on the Critical Plane Approach
Simulation of the Temperature Distribution of Gradient Ti-TiB Composites Prepared by Spark Plasma Sintering Process
Broadband Tunable Infrared Source and its Harmonic Generation
Recycling of Fiber-Metal Laminates
A Modified Implicit Iterative Difference Algorithm for Stiff Chemical Kinetic Equations in Complex Combustion System
Research of Laser Welding for Hot Rolling Strip Steel
Safety Model Comprehensive Judgement Application for Dike Construction Risk Evaluation System Research
Dissimilar Laser Welding of Ti-6Al-4V to Ti-6Al-6V-2Sn
Na-Bentonite Anti-Seepage’s Ecological Technology and Ecological Effects in Urban River Bio-Remediation
Comparison of Dry-Film and Zinc-Phosphate Lubricant for Tube Cold Forming
Parametric Study on Fatigue Life Design of Shaft with Holes
Microstructure and Fracture Behavior of Ceramic Particle Reinforced Composite Bond with the Assistance of Ultrasonic Waves
Policy Planning for Environmentally Sustainable Transport in Beijing, China
Calculation of Sound Radiation Power at Two Ends of Duct System
Effect of Plasma Nitriding on Ultra-High Cycle Fatigue Behaviors of Ti-6Al-4V
Chapter 8: Manufacturing in a Competitive Environment
Synthesis and Characterization of Highly Cross-Link Polysiloxane Based on 2,4,6,8- Tetramethyl-2,4,6,8- Tetravinylcyclotetrasiloxane
Force Calculation of Shunqiao Trench-Buried Inverted Siphon Structure
Research of Stress and Deformation Distributions in Central Incisors Restored with Different Glass Fiber Post Types
CAD/CAM of the SPROCKET and the EFFICIENCY TEST
Simulative Analysis for Reinforced Concrete Face Rockfill Dam of Qianqiao Reservoir
Blast Pressure Analysis of a Pressure Vessel
Stochastic Seepage Field Studies on Main Embankment of Yangtse Rive in Southern Jingzhou Zone of China
Research of FWP Process Deformation Compensation Forecasting on the Basis of TS-FNN
Optimization Study on FRP Bolt-End Structure Parameters
Wireless Monitoring and Scheduling System of Urban Water Supply Network
Concurrent Design of the Petroleum Drilling Machine Based on PDM Platform
Experiment Study on Influence of Knowledge Acquisition Ability on Product Innovation Quality
Research of System of High-Rise Building Steel Structure Construction Based on AHP-Fuzzy Comprehensive Evaluation
Reliability Study on Physical Layer of CAN Bus in Engineering Application
Study on Antenna Structure Technology for Realizing Passing Zenith Tracing
Research on Parametric Design of Dedicated Computer
Optimum Design Study of Hydraulic Hatch Cover on Buckling Strength
PLC Sequence Control System of Special Drill Machine
Based on Pro/E High Speed Milling of Thin-Walled Stents of Research
The Monitoring System of the Hoister Based on Virtual Instrument
An Accurate Exposure Time Measurement Method of CCD Cameras
Finite Element Optimization Design of the Drum of Storage Winch
Research on Virtual Design System for Spindle of High-Speed Machining Center
Simulation of Kinematic Movement for Invert Arch Floor of Plunge Pool with Numerical Manifold Method
An Improved Genetic Algorithm Based on K2(m) Triangulation of Continuous Self-Mapping
A Novel CNC Grinding Method for Relief Surface Based on a CAM System
Structural Optimization Based on Stochastic Finite Element Analysis and Optimality Criteria Methods
Wave-Induced Load Study on a Deck Barge
The Impact of Meshing Transmission of Arc Gear by Hobbing Method and Central Distance Error
Research on Semi Physical Test System of PCU on Satellite
The Virtual Prototyping Design for AKD Rolled Steel Bundling
Mechanical System Dynamics Simulation of Crank Linkage Mechanism Based on Pro/E
Velocity Measurement Based on Alternate M/T Method and Incremental Optical Encoder
Research on Speed Optimization of ESPCP System under Different Conditions Based on Neural Network
Design of Experiment, Approximate Model and Optimization of a Muzzle Brake
Research and Creation of Printing-Like Effect Digital Jacquard Fabric
The SINS Algorithm Simulation Based on GUI
Research on Parametric Design of Customized Products Based on Database
Discussion on the Modeling Design of New Times Table Lamp
The Design of Calibration Software of Sensor Characteristics Based on LabVIEW
Design and Research on New Type Fitness Washing Machine
Research on Brushless Permanent-Magnet DC Motor of Electric Scooter Based on Ansoft
Research on Rapid Detection of Vitamin C with an Optic Sensor
Quadruple-Arc Gear Design, Digital Processing and Carrying Capacity Test
The Application of 2nd Derivative in NIR and MIR Micro-Imaging of Two Plastic Materials
Quality Control in the Process of Drying Forming of Water-Soluble Plastic Film
Fatigue Strength Analytical Study of Truck-Mounted Concrete Pump
Research on the Wireless Multi-Point Temperature Acquisition and SD Card Memory System
Chapter 9: Other Related Topics
Research on Point-by-point Calculation Compensation Algorithm for Scanning Contours of Rapid Prototyping
The Key Technology in Extrusion Tapping of Internal Thread
Analysis of Aromatic Volatiles Utilizing a MEMS-Based Gas Chromatography Column
Effect of B2O3 and CaF2 on Viscosity of Ladle Refining Slag
Effect of Micro Scale on Prediction of Thermal Residual Stresses in Multilayer Ceramic Capacitors (MLCCs)
Application of Six Sigma Method in Improving the Quality of the Spiral Bevel Gear
Method of Spling Weight and Residual Value for Analyzing Bending of Laminated Skew Plates under Complex Stress State
