Mechatronics and Applied Mechanics II
Erscheinungsjahr 2013
ISBN: 978-3-03785-651-2
Verlag: Trans Tech Publications
Selected, peer reviewed papers from the 2nd International Conference on Mechatronics and Applied Mechanics (ICMAM2012), December 6 – 7, 2012, Honkong, December 8 – 9, 2012, Taipei
Buch, Englisch, 1800 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 3300 g
ISBN: 978-3-03785-651-2
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
- Technische Wissenschaften Elektronik | Nachrichtentechnik Elektronik Robotik
- Technische Wissenschaften Sonstige Technologien | Angewandte Technik Signalverarbeitung, Bildverarbeitung, Scanning
- Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde
- Technische Wissenschaften Technik Allgemein Mess- und Automatisierungstechnik
- Mathematik | Informatik EDV | Informatik Informatik Bildsignalverarbeitung
- Technische Wissenschaften Maschinenbau | Werkstoffkunde Produktionstechnik
- Technische Wissenschaften Elektronik | Nachrichtentechnik Nachrichten- und Kommunikationstechnik Regelungstechnik
- Technische Wissenschaften Maschinenbau | Werkstoffkunde Maschinenbau Mechatronik, Mikrosysteme (MEMS), Nanosysteme
- Technische Wissenschaften Sonstige Technologien | Angewandte Technik Medizintechnik, Biomedizintechnik
Weitere Infos & Material
Preface, Committees and Sponsors
Chapter 1: Manufacturing Technology and Processes, Design, Modelling, Simulation and Mechanical Engineering
Simulation of Microbubbles Drag Reduction on Nonsmooth Surface with Hydrophobic Property
The Research on Rake-Car’s Driving System of Ore Reclaimer
The Sequence Injection Analysis of Automobile Air Inlet Grille Plastic Part
Research on the Simulation of Self-Synchronization of Dual Mass for Vibrating System with Two-Motor Drives
Current Situation of and Development Strategy for Non-Road Multi-Cylinder Diesel Engine with a Small Power
Effect of End of Injection Angle on Performance and Emission Formation for a Gasoline Engine
Mechanical Performance Simulation Model Based on PDM
Hierarchical Pipe System Disassembly Sequence Planning by Dynamic Self-Adaptive Tree Based Motion Planning
Development of Hydraulic Oil-Fired Deicing System for Aircraft Deicing Vehicle
Architecture Design and Realization for Virtual Manufacturing Oriented CAPP System
AGV Scheduling Optimizing Research of Collaborative Manufacturing System Based on Improved Genetic Algorithm
Aerodynamic Characteristics Analysis of High-Speed Train on Cutting under Crosswinds
Investigation on the Simulation of Nonlinear Switch Load in Three Phase Coordinate System
Research of Chaotic Phenomenon for a Synchronous Reluctance Motor
CMMI Based System Software Process for Industrial Manufacturing System
A Knowledge Based Approach for Product Variant Design
The Dynamic Software Development Process for Industrial Manufacturing System
Developing an Audio News System Based on Android
Dynamics Analysis and Power Allocation Strategy Research for a New Hybrid Electric Urban Rail Vehicle
Multidisplinary Optimization of Crank-Link Mechanism of HCPE Based on iSIGHT
Experimental Study on Combustor Outlet Temperature Field of Gas Turbine
Research on Low Voltage Ride-Through Technique in DD-PMSG Wind Power Generator System
3D Reconstruction Method of Bent Tube with NURBS Curve
Comparison of LES and RANS Models in Compartment Fires Simulation
WSN System Based on Weight Adjust for Machinery Manufacturing Machine Monitoring
Blanking of Plastic Forming Simulation and Analysis Based on the DEFORM
Study on Simulation of Ocean Wave Generation System Based on SIMULINK
Single-Row Facility Layout Based on Manufacturing Costs
Ship Cabin Layout Optimization Design Based on the Improved Genetic Algorithm Method
Experiment Research and Model on Drilling Force of CFRP
Retrieval and Clustering for Multiple Disciplines Design Knowledge Based on Ontology and Semantic
The Simulation Study for Energy-Absorbing Properties of the Railway Vehicle’s Anti-Climber with Different Vertical Offsets
The Study of Marine Gas Turbine Power System Simulation Software Development
Fault Tree Analysis of Vehicle Engine Lubricating Oil’s Failure
Instantaneous Storage Availability Model: Considering Spare Parts Degradation before Replacement
Experimental Research on Parameters Identification of Dynamic Characteristic for Parallel Machine Tool
Experimental Study of Atomization Characteristic of Air Blast Atomizer
Short-Term Wind Speed Forecasting Based on Optimizated Support Vector Machine
Simulation of Toothpaste Flavor Transportation in Oral and Nasal Cavity during Respiration
Theory and Technique on Design of Extended Range in Solar Powered Intellective Vehicles
A CO2 Laser Camera
The Simulation Analysis of a Micro Electromagnetic Harvester Based on Vibration Energy
Optimal Channel Choice under Stochastic Demand with Multiplicative and Additive Shocks
Study of V/H/J of Pointing-Lapping for Hypoid Gears
Finite Element Analysis and Optimal Design of Frictional Roller
Optimization of Loss Models for Centrifugal Compressor Performance Prediction Based on Numerical Analysis Results
Conversion CL Data to NC Data Using an Instinctive Method for Non-Orthogonal Table-Type 5 Axis Machines
The Evaluation for Technological Innovation Capability during Product Development of Auto Parts Enterprises
Finite Element Simulation of the Artificial Knee-Joints of Similar Type Pairing
Modeling Methods of Cylindrical Surface Form Error by Precision Turning for Assembly
Analysis on Milling Force Based on AdvantEdge FEM
Discussion on Modeling Approach of 3-Dimensional Models Based on Web3D
Simulation of Two Dimensional Nanoscale Cutting Copper by Quasi-Steady Molecular Statics Method
Research on the Starting Characteristics of the Linear Engine System Using the Eccentric-Slider Starting System
New Collaboration between Engineer and Product Feature Generation in Industrial PLM Systems
Vertical Tail Topology Optimization Design Based on the Variable Density Method with Constraint Factor
Structural Drag Reduction in Taylor-Couette Flow
Simulation Research on Vibration of Valve Mechanism for Diesel Engine Based on AMESim
Simulation of Deployment Process of Junction Box
The Research and Development of VB and Solidworks-Based 3D Fixture Component Library
Design and Optimization of Electromagnetic Structures for Linear ISG Used in Range-Extended Electric Vehicle
Multiple Momentum Term BP Algorithm and its Application in Hot Rolling AGC System
Variant Design Method of Series Products Based on Skeleton
Construction of the Information Model of Ancient Architecture Components Based on BIM - A Case Study of Bracket Sets
The Research on Traction Simulation for a New Hybrid Power Train
Design of Hybrid Electric Bus on Regenerative Braking System
Design of 3D Modeling for the New Wave Power Generation Device and Test
The Rolling Bearing Fault Diagnosis Research Based on Improved Hilbert-Huang Transformation
Chapter 2: Robotic, Automation, Sensors, Detection and Monitoring Technologies
Biomimically Leg-Kinematics on Walking Robots
The Design and Implementation of Hexa-Rotor Aerial Robot
A Low-Cost Stewart Platform for a Radio Telescope
Electro-Mechanical Maximum Power Point Tracking of Photovoltaic System
Analysis on Energy Efficiency of a Rolling-Jumping Robot
Implementation of a High-Precision Ultrasonic Rain Gauge
Development of the Escaping Programming System for Fire Environment
Design of Small Laser Tracking System Based on Four-Quadrant Detector
Design and Implementation Based on ADXL213 of the Digital Inclinometer
Adaptive Interacting Multiple Model Unscented Particle Filter for Dynamic Acoustic Array
Exquisite Design of a CCD Analog Front End Module
Approximate Analytical Solutions of the Pull-In Behavior of an Electrostatically Actuated Clamped-Clamped Micro-Beam
Three-Dimensional Structure Trajectory Guiding Scan and Points Cloud Registration
Digital Closed Loop Fiber-Optic Current Sensor Based on Integrated Optical Phase Modulator
Dynamic Analysis of Eyeball Mechanism on Android Robots
Vision Sensor Application for Intelligent Polishing Robotic Cell
Development of Intelligent Fire Detection Module Using Optic-Sensors
Highway Mechanical and Electrical Engineering Quality Evaluation Methods Discussion
Motion Planning of Lineclimber, a Robot for Inspection of Transmission Lines
Design of Temperature and Humidity Monitoring System for Marine Working Platform
Lower Distortion in Trajectory Planning for a Rigid-Flexible Manipulator Based on PSO Algorithm
Shielding Method for the Capacitive Touch-Sensor
Study on Fault-Tolerant Method of Mobile Robot Integrated Navigation
A Study of Robot Car Positioning System in Small Area Based on Optical Mouse Sensor
Modeling and Development of a Robotized Hand-Hold Bone Cutting Device
Research on Real-Time Vision Detection Method for Sanitary Labels
Monitoring System with Wireless Sensor Network: A Survey
The Indoor Automatic Guided Vehicle with an IR Positioning and Low-Cost Inertial Navigation System
Analysis of Underwater Wet Welding Seam Forming Based on Arc Sensor Information
Research of Facular Energy Distribution for Pulsed Laser Tracking System
Robot Fish with Novel Wire-Driven Continuum Flapping Propulsor
The Summary on Robot Moving Platform
Target Searching of Mobile Robots Using Improved A* Searching Algorithm
Fast and Accurate Event Detection Based on Wireless Sensor Networks Using Fuzzy Logic Method
The Unbalance Current Effect Caused by Non-Uniform Inductors in the Multi Phase Converter with a Single Current Sensor
The Design of Permanent Magnetic Adhesion System for Wall-Climbing Robot
Comparison of the On-Line Power Detection and Prediction System
The Modeling and Simulation of Hexa-Rotor Aerial Robot
Application of Conductive Rubber Filled by Carbon Black for 3-D Force Measurement
An On-Line Monitoring System of Temperature Field in Tire
The Best Path Planning of Home Care Robot by Building a Conceptual CBR Framework
Design and Analysis of a Non-Vision-Based System for Detecting Unstable Gait
Application of Mobile Robot System for Cell Production
Implementation of Sun Tracking for Solar Cell with Maximum Power Point Tracking
Construct Small-Scale Vertical Axis Wind Turbine Monitoring System by Wireless Sensor Networks
Battlefield Awareness Network Research Based on Intelligence Role Division and Wireless Sensor Network
Design and Fabrication of Micro-Coil Sensor Array by Using UV-LIGA Process
Monitoring of Human Driver Behavior by Vehicle Trajectory Reconstruction for Transportation Safety Management
Structural Optimization of MEMS-Based Hydrophones with Perforated Active Membrane
Fault Detection of Robot Control Systems Based on Available Wireless Network Measurements
The Research And Design of Wireless Coal Mine Safety Network Monitoring System On The Basis of ZigBee
Wireless Power and Information Synchronous Transmission Technology Based on Magnetic Resonance
Chapter 3: Development Elecrtonics, Networks, Information Technology and Algorithms in Systems Applications
A New Adaptive Square-Root Unscented Kalman Filter for Nonlinear Systems
Near-Optimality in Stochastic Control of an Capital Accumulation System with Markovian Switching and Poisson Jumps
The Study on the Calculation Method of Bin Actual Coverage Based on the GPU Acceleration
Fault Diagnosis Method of Time Domain and Time-Frequency Domain Based on Information Fusion
Comprehensive Evaluation of Regional Grid Development Level of China under the Smart Grid Construction
A Mixed-Integer Memetic Algorithm Applied to Batch Process Optimization
Method of Data Transmission for Penetration Information Based on Flexible Connecting Cable
A Method to Ascertain Parameters of Samples and their Feature Weights in the Weighted Fuzzy Clustering
The Research of Particle Swarm Algorithm Based on Heuristic Rules for the Layout of Airplane Equipment Cabin
The Web Service Framework for SaaS in Cloud Computing Environment
Porting RT-Thread to Cortex-M3 Processor
Identification of Precision Positioning Stage Based on ARX Model
A New Approach to Flat Form Error and Contact Error Analysis
Hydraulic Balance Optimization Calculation and Experimental Research on Model of Fluid Network System
The Identification of Quality Attributes for SaaS in Cloud Computing
Design and Implementation of Virtual Maintenance Training System Based on Ngrain Aviation Equipment
Simulation Test System of CCD Signal Processor Based on FPGA
The Supplier Management Problems and Analyses of The Mechatronic Manufacturing Enterprises
Optimization of Flapper Compliant Mechanism Using Fuzzy Logic Combined Taguchi Method
Fault Diagnosis Method of Rolling Bearing Based on Ensemble Local Mean Decomposition and Neural Network
A Robust P300-Speller Brain-Computer Interface Based on Kernel PCA
A Novel Improved Algorithm of Radial Feature Code Extraction
Embedded Machine Vision System Design Based on Davinci DM355
A Novel Fuzzy Clustering Method with No Outliers Influence
Dynamic License Plate Localization for Vehicles on Multi-lane Using Single Camera
Application of Weighted Projection PM Algorithm in Estimation of DOA
Chapter 4: Mechanics, Thermal and Dynamics Systems, Vibration, Noise, Applied Mechanics and Numerical Simulation Applications
Research on Wavelet Compression and Reconstruction of Wind Turbine Vibration Signal
System-Reliability Evaluation Based on Series Chain Model under Exponential Distribution
A New Method for the Eigenvalue Problem of Structures with Uncertain-but-Non-Random Parameters
Numerical Investigation on the Effects of Sample Wire Motion in a Tube Furnace
Application of Ghost Body-Cell Method on Adaptively Refined Cartesian Grid in Computational Fluid Dynamics
The Study of Blockages Effect at Leading Edge on Rectangular Cavity in Subsonic Flow Using Particle Image Velocimetry (PIV)
Axial Deformation of Ball Screw Considering Contact Angle
A Study of Experimental Method for Mechanical Properties of Solid Propellant under Hydrostatic Compressive Loading
Thermal Analysis of Heating System in Thermosonic Bonding Process
Analysis of Incidence of Rail Failure and Track Composite Irregularity State Forecast
Symmetrical Dynamic Propagation Problems of Mode III Interface Crack
Applications of Statistical Energy Analysis in Influencing Factors Analysis of Aircraft Vibro-Acoustic Response Characteristics
Finite Proximate Method for Simulating Flood Propagation in Complicated River Channel and Flood Detention Area
Tool Orientation Planning for Four-Axis CNC Machines
Optimum Design of Rubber Isolator Based on Nonlinear Finite Element Method
Influence of Liquid Paraffins in Crude Oil on the Friction and Wear Behaviors of the Progressing Cavity Pump`s Stator Rubber
The Beauty of Molecule Motion
Short-Term Wind Speed Forecasting by Using Chaotic Theory and SVM
A Research on Gaussian Process Based Feature Extraction
An Experiment Based Reach Model for Fighter Cockpit Design
Using DOProC Method in Structural Reliability Assessment
Fatigue Analysis for the Aircraft Landing Gear Connecting Parts
Research on the Pressure-Measuring Uncertainty of Standard Internal Crusher Gauge
Mechanical Property Parameters Prediction of Tube Based on RBF Neural Network
Size Effect on Pull-In Behaviors of Electrostatically Actuated Cantilever Micro-Beams
Numerical Analysis of Bubble Motion Characteristics within Vertical Rectangular Micro Channels
The Noise Source Localization of Industrial Sewing Machine by NAH Method
Structural Design of Primary Mirror Subassembly for Space Telescope
Finite Element Numerical Simulation Computation of Kitchen Units under the Condition of Stacking and Horizontal Controlled Impact
PZT Acoustic Energy Harvester Arrays with Dual Top Electrodes
Real-Time Monitoring for Vehicle Brake Temperature Rise in Continuous Long Downhill
Multi-Physical Analysis of Eddy Current Damper (ECD) for Reaction Force Compensation Device
Mobility Deposition Effect of Aerosol Particles in the Boundary Layer
Research on the Theories of Self-Synchronization of Dual Mass for Vibrating System with Two-Motor Drives
Study of Thermal Management System for a Series-Parallel Hybrid Electric Vehicle Using Numerical Simulation
Investigation of the Magnetic Signals for the Ferromagnetic Components after Tensile Fatigue under Weak Magnetic Excitation
The Over-Range Collocation Method for Nonlinear Analyses
Foundation Pit Excavation on Surrounding Buildings Effect Analysis
Experimental Estimation of Shear Wave Velocity Profile Using MASW Method and Inversion Technique
Rough Road Identification Method Based on Engine Speed Variation Rate
Independent Velocity Measurement of Small Underwater High-Speed Moving Body Based on External Turbine
Harmonic Analysis of the High-Speed Winder with Unbalance Masses
Analysis of Modal Properties of Spur Planetary Gears
The Field Inspection and Research of Related Problems about a Kind of Non-API Thread Connections
Analysis of Bifurcations for a Functionally Graded Materials Plate
Research on the Random Vibration Cumulative Fatigue Damage Life Based on the Finite Element Analysis
Simulation Research on Motion Law of Arresting Hook during Landing
Novel Equivalent Circuit Model for Spiral Inductors on Lossy Silicon Substrate
Analysis for the Syngas Composition of Gasifier
Design of Amplifying Circuit for Receiving Weak Signal for Laser Fuze
Determination of Stator Temperature Distribution for a Synchronous Machine
Research on Heat Transfer Regulation of Power-Split Hybrid Electric Vehicle under Silent Watch Operation
Wind Tunnel Experiment and Numerical Simulation of the Pressure Distribution on a Sedan Exterior Surface
Aerodynamic Design and Numerical Simulation Analysis of a Passenger Car’s Defrosting Duct
The Research of Impeller Used in Wave Energy Power Generate Equipment
Free Torsional Vibration Characteristics of a Closed-Form Planetary Gear Set
Experimental Study of Capillary Radiant Cooling System with Parameters Changing
The Influence of Wheel Rotating to FSAE Racing Car Aerodynamic Characteristics
Spectral Clustering Algorithm of Uncertain Objects
An Improved Single-Phase Free-Surface Lattice Boltzmann Model with Surface Tension and Wall Adhesion
The Fatigue Simulation Analysis of Customized Implanted Titanium Plate for Human Mandible Bone Reconstruction
Influence Analysis of Blade Fracture on Hydrodynamic Performance of Ducted Propellers Based on CFD
Experimental Study on the Durability Performance of PPS Filter Media
Settlement Deformation Evaluation Method of High-Speed Railway Cutting under Rebound Effect
Effect of Sample Size of Needle Felt on its Strength Measurement
Effect of Bolt Hole Residual Stresses on Fatigue Performance of Truck Frame Rail Structures
Study on the Temperature Field of U75V Rail in the Cooling Process Based on ANSYS
Shaft Vibration Signal Denoising Based on Wavelet Analysis
XFEM Based Analysis of the Crack Tip Stress Fields on a Three-Point Bending Specimen
P-SS Algorithm for Solving the Eigenvalue Problem of Finite Element System
Comparative Study of the Flow in a Differentially Heated Cavity Using Thermal Lattice Boltzmann Method
Accuracy of Stress Analysis Using Numerical Integration of Elastic Half-Space
Continuum Aeroelastic Model and Flutter Analysis for a Variable-Span Morphing Wing
Meshing Method of Calculating Water-Entry Flow Field at High Speed
Design Method of Dynamic Similarity of the Rotor-Bearing System
Influence of Passive Joint Damping on Modal Space Decoupling for a Class of Symmetric Spatial Parallel Mechanisms
Size Effect on Buckling Behaviors of Gradient Elastic Slender Columns
A Comparison of Two Accelerated Degradation Models with Temperature and Humidity as Accelerating Stresses
Research on Thermal Degradation Kinetics of Polyphenylene Sulfide Filter Media
Sensitivity and Linearity Measuring of Micro-Gyroscope Based on Dynamic Analysis
The Research on the Influences of Exhaust Noise and Engine Performances by Using Cracking Sound Attenuation Coupler
Study on Viscoelastic Plastic Damage Model for Mica-Quartzose Schist
Magnetism and Solid Coupling Vibration of Stator Double-Shell System of Asynchronous Machine
Study and Simulation of Dead-Time Compensation for the Voltage Source SVPWM Inverter
Existence of Solutions for Elliptic Equation with Critical Sobolev Exponent
Design of Improved Disturbance Observer for Stabilized Platform Servo System
Research of Socket Welds Vibration Fatigue Resistance and Application of Wavelet Transform Method in Damage Detection
Reliability Study about the Approximation Methods of Censored Data in Fatigue
Analysis of Non-Standard Gear Contact Fatigue Life
Nonlinear Dynamic Analysis for the New Whole-Spacecraft Passive Vibration Isolator
Study on the Influence of Gravity Factor on Parametric Resonance of Pipe Conveying Fluid
Chapter 5: Materials Science and Technology, Material Manufacturing Processes
A Precision CNC Turn-Mill Machining Center with Gear Hobbing Capability
Improvement in Elastic Modulus of MWCNT/Epoxy Nanocomposites
Research on Friction and Wear Behavior of Rubber in the Mixture of Crude Oil with Water
Effect of (NaPO3)6 on Sea Water Corrosion Resistance of Micro-Arc Oxidation Ceramic Coatings Formed on Pure Aluminum
Approach to Steel-Bamboo Composite Structure System
The Analysis of the Experiment of Polarized Light in Uniaxial Dichroism Crystal
Cloning and Expression of ß-Glucosidase Gene from Bacillus pumilus
The Application and Analysis of the Risk Assessment Model about BLEVE Accident
Influence of Pattern Coating Thickness on Porosity and Mechanical Properties of Lost Foam Casting of Al-Si (LM6) Alloy
Current Characteristics of AlGaN/AlN Ultraviolet Photodetector with Metal-Semiconductor-Metal Structure
Study on the Mechanical Properties of ABS Enhanced by Magnesium Hydroxide Whiskers
Research on Fine Particles Capture of Baghouse Filter Media
Influence of Repeated Quenching-Tempering on Fisheye Cracks around Tin and Al2O3 Inclusions in SAE 52100 Steel
Discrete Element Method Simulation of Residual Stresses in Grinding of Granite with Single Diamond Grain
Characteristics of Stress Distribution of Micro-Cantilever of Polycrystalline Copper at the Pull-in Voltage
The Effect of the Stirring with a Large Size of Stirrer on Formation of the Composite Joint Reinforced with SiC Particle
Analysis of Application of New Photochromic Materials in Design of Kindergarten
Reinforcement of Polypropylene Using Micro-Fillers
Evaluation of Gamma Radiation on NR/PHBV Blends
Effect of Lanthanum Nitrate on Titanium Alloys Ceramic Membrane Formed by Micro-Arc Oxidation
Evaluation of Cadmium Contamination in the Sediments of Northern Kaohsiung Harbor, Taiwan
Experiment Investigation on Two Filter Medias for Air Filtration
Selective Glycine Polymorph Crystallization by Using Silver Nanoparticles
Experimental Study of Bamboo Fiber Cushion Packaging Materials for the Express Packaging
Polypyrrole Actuator Operating Characteristicsin Electrolyte Solution Mixed with Methanol
Electroosmotic Flow Pump on Transparent Polyimide Substrate Fabricated Using Hot Embossing
Improved Performances of All-Polyimide Fluidic Devices Using Thermal Nanoimprinting
Valveless Micropumps with Dual Polyimide Diaphragms
Fabrication of Au Micro-Electrodes on Polyimide Films Using Transfer Printing Techniques
Single-Ball Rolling Contact Fatigue of 13Cr-2Ni-2Mo Stainless Steels Quenched by Induction Heating Method
Experimental Study on the Fatigue Properties and Reliability for the Steel of Elastic Oil Sump
Evaluation of the Status of Copper Contamination of Surface Sediments of Jen-Gen River Estuary, Taiwan
Ordered Melanin Film Fabricated by the Self-Assembly Technique
An Interpolation Algorithm Based on S-Curve Feedrate Profile and Look-Ahead Function
Research on Compensation Method of Coupled Error in High-Precision Micro-Machining Process
Chapter 6: Control System Modeling and Applications
An Intelligent Cruise Controller for High-Speed Train Operation Based on Fuzzy Neural Network Theory
Adaptive Backstepping Stopping Control of Urban Rail Vehicle
A Digital Peak Current-Mode Control PFC with Bifurcation Control
Robust Control Design and Analysis Using SCILAB
Spacecraft Attitude Tracking Using Second-Order Sliding Mode Control via Backstepping
Quasi-Sliding Mode Control for Impulsive Delayed Vehicle Longitudinal Following System with Bounded and Varying Parameters
Design and Implementation of Adaptive Fuzzy Cerebellar Model Articulation Controller for Direct Torque Control System
Physical Modeling of Magneto Hydrodynamic Explosive Munition and Detonation Control
Multidisciplinary Design Optimization of a High-Flow Control Valve
Research on Hydraulic Pitch-Control System of Wind Turbine
Design of Five Axis Cooperation Machine Based on Motion Control Board
Design on the Bearing Forging Spray Cooling Control Device
A Touch-Based Wheelchair Control Interface: Concept and Implementation
Study on Predictive Control Technology Based on Disturbance of Electrically Heated Boiler
Precise Angle Control of Electromechanical Actuator with Fuzzy PID and Genetic Algorithm
Design and Simulation of Fuzzy-PID Vector Control System Based on Mine Hoist
The Speed Control of Immune-Fuzzy Sliding Mode Controller for a Synchronous Reluctance Motor
Engineering Objective Controls Knowledge Driven Product Definition in Industrial Product Development
Research on Improvement Algorithm of Model Free Learning Adaptive Controller
Robust Fixed Point Transformations in the Model Reference Adaptive Control of a Three DoF Aeroelastic Wing
Research on Modeling and Control Characteristics for Electric Power Steering System of Logistics Machine
Stationary Response of Duffing-van der Pol Oscillator with Delayed Feedback Control under Wide-Band Noise Excitation
Driving Performance Advancement for SRM Using a Novel Adaptive Learning Control on Dominant Parameters
Application of DEA-DA Model and Method on Quality Control in Production Process
PID Neural Network Smith Predictive Control for a Control System with Time Delay
An EEG Based Control System for Intelligent Wheelchair
The Research of Digital Display Pump Test Stand Based on IPC
Adaptive Controller Designed for High-Speed Train ATO System with Nonlinear and Uncertain Resistance
Intelligent Power Management of Electric Vehicle with Li-Ion Battery
Robust Controller of Self-Powered Vehicle Active Suspension Based on LMI Design
Influence of Parameters in Coupled Adaptive Self-Organizing Sliding-Mode Fuzzy Controller Using Volumetric Type Bending Machine
Hybrid Projective Synchronization for the Fractional-Order Chen-Lee System and its Circuit Realization
Control Platform for Tubular Permanent-Magnet Linear Synchronous Motor
New Planning of Pipe Cooling in Temperature Control for Mass Concrete
Robust Backstepping Control for Longitudinal Flight Dynamics
Iterative Adaptive Control of a Three Degrees-of-Freedom Aeroelastic Wing Model
A Kind of Design for Intelligent Photoelectric Tracing Trolley
LABTM Control System Based on FPGA
Receding Horizon Control on Automatic Landing Lateral Loop of Carrier-Based Aircraft
Research on Data Reports Based on Experimentation & Test of Traffic Engineering
Chapter 7: Developments in Medical Technologies and Images Processing Technologies
The Effects of Production Performance Model and Competitive Environment of Hospital Systems
The Viscoelasticity of Intestines by Dynamical Mechanical Analysis
Development of a CCD-Based Optical Computed Tomography Scanner Used in 3D Gel Dosimetry
Finite Deformation Analysis and Numerical Simulation of Arterial Wall
The Research of Applying Parallel Streaming Technology on Developing Cloud Computing Platform for Delivering Medical Images
The Illumination of a Electrical Non-Fiberoptic Endoscope of Surgery
Cell Separation Through Ascending and Descending Curvilinear Microchannels
The Influence of Suture Density on Bioprosthetic Heart Valve
Computer Simulation for New Theoretical Model Constructed with Tuberculosis
Color Image Enhancement Methods Based on Matlab
Design and Implementation of Seismic Data Digital Filter
Realization of Car’s Frontal Projected Area Based on OpenCV
Audio-Video Synchronization Method Based on Playback Time
Comparative Analysis of Image Measurement Accuracy in High Temperature Based on Visible and Infrared Vision
