Sonstiges, Englisch, Band Volume 575, 1006 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Sonstiges, Englisch, Band Volume 575, 1006 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Applied Mechanics and Materials
ISBN: 978-3-03795-836-0
Verlag: Trans Tech Publications
The 182 papers are grouped as follows:
Chapter 1: Advanced Materials Engineering and Materials Processing Technologies,
Chapter 2: Mechanical Engineering and Dynamics, Liquids and Gases Mechanics, Applied Mechanics in Technological Processes, Structural Design,
Chapter 3: Instrumentation, Measurement and Testing Technologies, Analysis and Calculations Methodology,
Chapter 4: Technologies of Power Systems, Energy and Thermal Engineering, Its Applications,
Chapter 5: Mechatronics and Robotics,
Chapter 6: Control Technologies, Automation and Simulation of Manufacturing,
Chapter 7: Data Mining, Detection, Monitoring and Fault Diagnosis Technologies,
Chapter 8: Networks and Information Technologies, Systems Design,
Chapter 9: Product Design, Planning, Projects Management and Industrial Engineering
Autoren/Hrsg.
Fachgebiete
- Technische Wissenschaften Bauingenieurwesen Bauingenieurwesen
- Technische Wissenschaften Technik Allgemein Mess- und Automatisierungstechnik
- Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde
- Technische Wissenschaften Maschinenbau | Werkstoffkunde Produktionstechnik
Weitere Infos & Material
Modeling of TiN Coating Thickness Using ANFISEffect of Secondary Cooling Configuration on Microstructure of Cast in Semi-Continuous Casting of Copper and BrassOptimization of Products Yields from the Pyrolysis of Palm Kernel Shells Using Response Surface MethodologyStudy on the Effect of Wear Resistant Materials Applications in Reducing Wear Damage of Gas Turbine Combustor ComponentsType of Failure of Zirconia-Based Ceramics in Dental Laboratory in Misurata, LibyaSurface Morphology and Mechanical Properties of Chitosan Film Incorporated with Marine Macroalgae by Casting MethodEffect of Thermodynamic Properties on Porosity of Ceramic Membrane Prepared by Phase InversionGreen Synthesis of Silver Nanoparticles Using Elaeis guineensis (Palm Leaves): An Investigation on the Effect of Reaction Time in Reduction Mechanism and Particle SizeEnergy Balance in Al-Co Open-Celled Foam of Transpiration CoolingEffect of Fiber Treatment on Stress-Strain Behavior of Kenaf Fibers Reinforced Thermoplastic Polyurethane CompositesPotential of Integrated Membrane Bioreactor in Batik Dye Degradation - A ReviewEffect of Calcination Temperature on Synthesis of N-Fe-TiO2 for Photocatalytic Degradation of Methylene Blue under Visible LightDye Decolourization of the Remazol Dye in Textile Effluent by Using Bambusa heterostachyaThe Potential Use of Tacca leontopetaloides as Green Material in Manufacturing Automotive PartNumerical Simulation on Moulded Thin-Walled Parts via Injection Moulding ProcessFeedstock Characterization of Elemental Nickel and Titanium Powders Mixture for Metal Injection Moulding ProcessMaterials Development and Hardness Properties of Aluminum AlloyThe Effect of Zr Content in the U-ZrHx Alloy Powder on Density, Heat Capacity, and MorphologyEffect of Co Doping on the Properties of Ce0.75Zr0.25O2 NanocatalystOverview: Modification of Cerium Oxide in Three-Way CatalystsSpecific Heat and Volumetric Heat Capacity of Granular Materials as Affected by Moisture and DensityWavelet-Based FDTD and High Resolution Spectral Estimation for Calculation of Band Structures in Two-Dimensional Phononic CrystalsThe Accurate Prediction Method of Tension Modulus for Nylon Cord/Rubber Composite MaterialStudy on the Grinding Process of Ceramic Zirconia Oxide RodRheological Study of Nanosilica Based Drilling FluidEffect of Chemical Vapor Deposition Process Parameters on Graded SiC-SiO2 CoatingThe Theoretical Study of TM Transmittance and Contrast Ratio for Sub-Wavelength Metallic GratingsEffect of Auxiliaries on Pore Structure of Foam GlassChemical and Thermal Characterization of Dilute Sulfuric Acid Hydrolysis of Coconut DregsMicrowave-Alkali Activation on the Morphology and Structure of Bamboo Activated CarbonEffect of Powder Particle Size of Tin Based Alloy Sintered via Hybrid Microwave and Conventional FurnaceEffect of Hydrochloric Acid (HCl) Treatment on FTIR Profile of Agarwood Waste from Hydrodistillation ProcessCorrosion Resistance by Sodium Metavanadate for AZ91D Magnesium AlloySynthesis and Characterization of CuO/SnO2 NanocompositesEffect of Ultrasonic and Sonothermal Treatment on Weight Reduction and Particles Size Distribution of Raw Palm Oil Mill Effluent (POME)Evaluation of Buckling Performance of Fibre Metal Rectangular Plates: Experimental and Numerical InvestigationRemoved at authors request.Study on Resistivity Changes of Local Material Silicon Wafer Doped with Neutron Transmutation Doping (NTD) Using Multi Purpose Nuclear Reactor (MPR-30)Automated Metamaterial Design with Computer Model Emulation and Bayesian OptimizationComparative Inhibition Effect of Synthesized Fatty Amides Mixture, Pyridine and Pyrrole on Carbon Steel in Saline EnvironmentStudy on the Impact of Welding on the Corrosion Properties of AA 6061 T6Development of Maskless-Curing Slurry Stereolithography for Fabricating High Strength Ceramic PartsSurface Properties and Cell Response of Bioactive Thermally Grown TiO2 NanofibersEffects of Fibre Loading and Interfacial Modification on Physical Properties of Rice Husk/PE CompositesThermal Stability of an Axial-Compressed Open-Tip Carbon NanoconeEffects of Ca Addition on Chemical Composition, Microstructure and Dielectric Properties of BaTiO3Research on the Microstructure and Performance of Asphalt after the Salt Freezing CycleThe Application of Anti-Corrosion Materials in the Oil and Gas Field DevelopmentLinear and Angular Displacement Relationship of Natural Rubber Engine IsolatorOptimization in Synthesis of ITO Thin Films Fabricated by DC Magnetron Sputtering MethodCharacteristics of Electrophoretic Deposition-Assisted Polishing Using Bamboo CharcoalOptimum Shape and Dies Design for New Thin Metal Gasket by Using Simulation ExperimentThickness Increasing Characteristics of Steel Pipe during Die FormingEstimating Correlation of Effective Thermal Conductivity on the Spherical Packed Bed Porous MediaParameters Design of Shaving Cutter with Novel Relief PortionDiamond like Carbon (DLC) Thin Films: Preparation and CharacterizationApplication of Finite Element to Spur Gear Stress Reduction Using Stress Relieving FeatureParametric Study of Drag Force on a Formula Student Electric Race Car Using CFDComparative Study of Motorcycle Helmets Impact PerformanceNovel Design of Valve Stem to Eliminate BucklingEffect of Annealing Temperature on Microstructures and Properties of Warmly Deformed SCRAM SteelThermal Characteristics of a Circular Finned Thermosyphon Using Different Working FluidsStatic Analysis of Variable Cross-Section Beam Carrying a Moving Heavy LoadThe Design Research of Millimeter-Wave Homing Empty - Empty Ammunition BallisticsStructural-Acoustic Topology Analysis Based on Evolutionary Structural OptimizationExperimental Evaluations of High/Ultra-High Speed Grinding of Tungsten CarbideInfluence of Gas Condensability on Labyrinth Seal's SealabilityOptimum Design Based on Damage Tolerance for Overall Beam StructureCascade Aerodynamic Loss Correlations Accounting for Turbine Disk InclinationMechanism of the Strip Surface Chatter Marks with 1220 Cold Rolling MillStudy of Hygrothermal Environment Effect on Compressive Strength of Stiffened Composite PanelPreliminary Design and Computational Analysis of a C-D Nozzle with By-Pass SystemOn the Kinematic and Meshing Efficiency Analysis of Planetary Gear Reducer with Two Ring GearsTensile, Hardness, and Torsion Behavior of Welded AAResearch on Hydrodynamic Performance of Three-Dimensional Airfoil with Tubercles on Leading-EdgeEffect of Geometric Parameters on Mass Transfer Characteristics for Pulsatile Flow in Wavy-Walled TubesCharacterization of Interfacial Stresses of a Coating/Substrate System due to Underneath Periodic EigenstrainsPerformance of Transient Temperature in Hot Spot IgnitionOn the Influence of the Speed-Feed Interaction on the Wear Rate and Life of Multiple Coated Carbide Inserts Considering Rough Turning ProcessOptimization of Milling Process for Aluminum Alloy Frame Part Based on Milling Force AnalysisStudy of Solidification Time and Solidus Velocity on Porosity Formation in High Strength Aluminum Alloy CastingsCharacterization of Local Bolt (C= 0.071%) after Surface Hardened at a Temperature of 400 ?C for 7 Hours with RF Plasma Nitrocarburizing ApparatusTensile Testing of Hybrid Composite JointsA Method of Earth Gravity Environment to Imitate LRV Steering on the Lunar SurfaceApplication of Bispectral Analysis in Vibration Fault Detection: A ReviewUsing CFD Technique to Investigate the Effect of Tire Roiling-Noise with Different Pattern DesignAnalysis of Shape Memory Alloy Hybrid Composite Plates under Low Velocity ImpactResponse Surface Approach for Sensitivity Study of Neck Forces in Restrained Child Occupant during Side-Impact CrashSurface Morphology Study: Effect of Electrolyte pH on the Electrodeposited Sn-Ag-Cu (SAC) Solder AlloyThe Application of Nonlinear Dynamics in Hazard PredictionAn Ensemble Approach of Machine Learning in Evaluation of Mechanical Property of the Rapid Prototyping Fabricated PrototypeFinite Element Analysis of Vacant Tubular Members under Static Loading Considering the Tip Shapes of LoadStructure Based Grading of Kinematic ChainsCharacteristics of Underexpanded Co-Flow JetsApplication of Uniform Design and Kriging Interpolation in Optimization of ITI Dental Implant with Dynamic Chewing LoadsComparison of Thermal Fatigue Test Methods for Die Casting Process: A Finite Element StudyAn Assessment of Carrying Capacity for Substructure of Offshore Modular Drilling RigDetection and Compensation of Positioning Accuracy Based on the Laser InterferometerMeasurement Uncertainty Research on Current Operation Humidity SensorFeasibility Analysis of DC Digital Voltmeter Automatic Test EquipmentThe Design and Implementation of Matlab Simulation in Optical AberrationResearch on the Vibration Characteristics of the Explosion Vessel Using Wigner-Ville DistributionInvestigation of Incoherent Gamma-Ray Scattering Potential for the Fluid Density MeasurementStudy and Design of Checking and Testing Car for Whole CircuitResearch on Project Site Sampling Method of Quality Supervision Sampling Inspection for Corrugated Sheet Steel Beams for GuardrailResearch on Electronic Implementation, Circulation Process in PDM SystemAnalysis of the Concentration of Pollutants Based on Wavelet AnalysisTransport Parameters of Electrons in N2-O2 Streamer DischargeHardware Design of Nature Gas Engine ECU Based on Single ChipFabrication of 1-3 Cement-Based Piezoelectric Ultrasonic Sensors for NDE ApplicationsA New Kind of Texture Synthesis Method Based on Best MatchThe Study on High Way Traffic Capacity Based on the Maximum-Flow AlgorithmMonotonic Convergence Analysis for 2-D Roesser Systems via a LMI ApproachCreation of Coherent Superposition State by Stimulated Raman Adiabatic Passage in Serial Multi-?-Type SystemStudy and Analysis of Power System Stabiliser Performance Using Artificial Neural NetworkTidal Current Turbine and Related Development Problems for IndonesiaGas-Liquid Mixer Design of Multiphase Flow Experimental ApparatusThermal Characterization of Lithium Polymer Battery Module for Electric Vehicle ApplicationBio-Diesel from Almond Oil as an Alternative Fuel for Diesel EnginesBiofuels Produced from Hydrothermal Liquefaction of Rice HuskFaults Location of Cascaded Inverter Based on Artificial IntelligenceA Small Concentrating Solar Power Tower SystemElectricity Generation with Camphor as FuelA Way to Determine the Economic Operation Mode of Substation TransformerSUPEL Scenario for PWR Spent Fuel Direct Recycling SchemeApplication of the Improved Grey Model in Power Load ForecastingPhase Change Material as Pump in an Organic Rankine CycleThe Design of Battery Management System Based on MC9S08DZ60 and the Monitor Backstage Based on VB6.0Numerical Simulation of Heat Transfer for the Ethyl Benzene Dehydrogenation Catalyst in the KilnTo Study Different Losses and Loss Co-Efficient on Solar Flat Plate Collector at 900 Yaw AngleElectrical and Structural Properties of P-Type Monocrystalline Silicon Solar Cell with Phosphorus Screen-Printed N+ EmitterOptimization Parameters and Synthesis of Fluorine Doped Tin Oxide for Dye-Sensitized Solar CellsThe Quantitative Forecast and Suppression on the Electromagnetic Radiation from Low Voltage Frequency ConverterThe Effect of the Material of the Body of a Solar Still on its PerformanceDesign of a Redundantly Actuated Asymmetric Linear DELTA Parallel Mechanism for Singularity-Free Mode ChangesFabrication and Characterization of IPMC Actuator for Underwater Micro Robot PropulsorDesign and Failure Analysis of Track Tensioner Unit for Mobile Robot Using SolidworksA Preliminary Study of the HPN RobotDevelopment of the Self-Propelled-Gun?s Fire Extinguisher Bottle Test Equipment Based on Pump-Valve Combined Control SchemeExploitation and Verification of the Engine Controller Virtual Test SystemResearch on Inverse Control of Active Magnetic Bearing Based on Fuzzy Inverse ModelCombined CNF with LQR in Improving Ride and Handling for Ground VehicleMechanical Design of Mini Automated Storage and Retrieval Warehouse System for Electronic ComponentsThe Numerical Analysis of the Thermo-Siphon Self-Injection Refrigeration SystemWheel Synchronization Control in Steer-by-Wire Using Composite Nonlinear FeedbackModeling and Optimization of Laser Polishing ProcessResearch of Automobile Driving Simulator Control SystemAir Transport Flight Program Performance of Navigation Based on the Continuous Automatic Control and MonitoringThe Variable Steering Ratio for Vehicle Steer by Wire System Using Hyperbolic Tangent MethodMathematical Modeling of Electromagnetic Levitation Based Active Suspension Using Bond GraphNumerical Simulation of Hydraulic Jump Using the Improved Space-Time Conservation Element and Solution Element MethodIntelligent Detection System of Illegal Appliances? Malignant Load of Campus Electrical GridRemote Monitoring Technology and its Application to Control of Industrial Power SupplyA Bank of Finite Memory Filters for Fault Detection and Adjusting Detection LatencyEffective ACPS-Based Rescheduling of Parallel Batch Processing Machines with MapReduceAnalysis on Bidirectional Reflectance Distribution Function of Rough Earth Surface in Remote Sensing ImagingIntroduction of Fingerprint Recognition Method for Machinery Faults DiagnosisMachine Learning Tools in Machinery Faults Diagnosis: A ReviewExperimental Study of Electric Bicycle Charging Fault SimulationProcess Sequencing Modeled as TSP with Precedence Constraints ? A Genetic Algorithm ApproachResearch on Data Modeling for Management System of Alignment InformationThe Local Approximation Method for Structural OptimizationResearch of Information System EngineeringMeasurement and Analysis Topological Characteristics of Video-Sharing NetworkA Study on the Hardware Configuration Impact on Client-ServerA Novel Application for the Emulation of Sensor Net-WorksDesign and Analysis of Lean Production Planning and Control System for NPF CompanyAn Immune Based Ontology Implementation of Hazard and Operability Analysis in Production SystemsIntegrating AHP Application for Project ManagementAn Investigation for the Potential of Improving the Performance of Pattern Making Process in Steel Foundries: Case StudyThe Effectiveness of Value Stream Mapping (VSM) as an Improvement Tool for the Manufacturing OperationProduct Life Cycle: VAVE Impact in Manufacturing Cost ReductionProblems in the International Standard Model Method and Empirical StudyA Hybrid Discrete Firefly Algorithm for Multi-Objective Flexible Job Shop Scheduling Problems with Maintenance ActivityScheduling with Discretely Compressible Processing Times to Minimize MakespanThree-Dimensional Reconstruction of Three Real Roots Included Periodontal Ligament and Implant StudyEquipment Aging, Aging Detection, and Aging Management: A ReviewThe Design of the Agricultural Equipment Integrated DeviceResearch and Implementation of Electric Power Market Analysis and Forecast SystemElectrolytic Simulation Experiment of Multilateral Horizontal wellThe Head Injury Mitigation of an Adult and Child Pedestrian in a Frontal Vehicle Impact Using Response Surface Methodology
