Buch, Englisch, 1396 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 2700 g
Buch, Englisch, 1396 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 2700 g
ISBN: 978-3-03785-201-9
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preface, Organizing Committees
Part 1
I. Structural Materials
Study on the Sewage Treatment by SBBR-BAF Filled with Ceramic Filling
Research on Drag Reduction Effect of Concave Non-Smooth Surface in Air
Numerical Analysis of Hydrodynamic Lubrication on Water-Lubricated Rubber Bearings
The Effect of CF Modification on the Flexural and Tribological Properties of PTFE Composites
Evaluation of the Friction and Wear Properties of PEI Composites Filled with Glass and Carbon Fiber
Research on Process Parameters Optimization of Squeeze Casting for AZ91D Magnesium Alloy
Research on Energy Absorption Characteristics of Honeycomb Sandwich Panels
Corrosion and Protection Studies of N80 Steel in CO2 Solution
Study on Distribution of TiC Particles in Molten Steel under Electromagnetic Stirring Condition
Characterization and Analysis of Ethylene-Propylene Copolymers
Negative Thermal Expansion of Gd2Fe16.5Cr0.5 Compound with Th2Ni17-Type Structure
Local Stress-Strain Method for the Effects of Scratch on Fatigue Performances of Cabin Glass
Research on Substitution of Molybdenum by Manganese in Low Alloyed Bainite Ductile Iron
Effect of Minor Compressive Deformation in Austenite on Martensitic Transformation in Modified 9-12%Cr Ferritic Steel
The Investigation on the Non-Contact Treatment of the Metal Surface Layer by Using Strong Pulse Electromagnetic Field
The Phase-Field Simulation of the Grain Growth under External Field
Advanced Stab Resistance Fabrics Utilizing Shear Thickening Fluids
Influence of High Current Pulsed Electron Beam Irradiation on Ni-P Electroless Plating
Properties of Nanocrystalline Aluminium Fabricated by Warm-Vacuum-Compaction Method
Evaluation of the Friction and Wear Properties of PA6 Composites Filled with Nano-SiO2
Dynamic Strain Aging Induced by Cyclic Deformation in Two Magnesium Alloys
Superplasticity of AZ91 Alloy ECAPed with Different Routes
Study of Epoxy Resin Emulsion by Emulsion Graft Polymerization
The TPB and Tribological Properties of Short Carbon Fiber Reinforced Polyimide Composite
Preparation of High Surface Area Anatase TiO2 by a Low Temperature Hydrothermal Process
Numerical Simulation on the Surface Subsidence Effect during Shield Tunneling Construction
Calculation of Statistical Values (S') of Phase Structure Formation Factor (S) and Application to Solidification Theory of Cast Iron
Synthesis and Properties of Cerium Oxide Nanoparticles
The Study on Precipitation Characteristics in 6082 Aluminum Alloy with Cu Addition
Effect of Asynchronous Rolling on Deforming Texture in Al Alloy 6111
Effects of Heating Methods on Recrystallization Texture of an Al-Mg-Si Alloy
Experimental Research on the Fracture Properties of Roller Compacted Steel Fiber Recycled Concrete
Microstructure and Mechanical Properties of Al-Mg-Sc Alloy Processed by Semi-Solid Continuous Casting-Extrusion
Research on the Nanophase Reinforce Cu Alloy
Calculation of Statistical Values of Phase Interface Valence Electron Structure Parameters of Cu-Zn Alloy
Analysis of the Effect of Nitrogen on Cold Shortness Behavior of Steel with the Electron Structure Parameters of Phase Interface
Effects of the Valence Electron Structures of Nitride on Cold Shortness in Steel
Influence of Different High Temperature and Heated Time on Properties of Concrete
Effect of Process on Microstructure and Elevated Temperature Mechanical Behavior of Multi-Phase NiAl-Fe(Nb) Alloy
Microstructure and High Temperature Mechanical Property of Directionally Solidified NiAl-Cr(Mo)-W/Nb Alloy
Study on Photocatalytic Performance of F-Doped Nanometer TiO2
Effect of Temperature and Grain Size on the Corrosion Behavior of 316L Stainless Steel in Seawater
Electrochemical Corrosion Behavior of Laser Gas Nitrided Layer on the NiTi Shape Memory Alloy in Hank’s Solution
Microstructure and Hot Corrosion Properties of Laser Cladding of a Co-Base Alloy on the Leaf Surface of Gas Turbine
Study on Wear and Corrosion Properties of Ti6Al4V Alloy by Laser Gas Nitriding
Study of WC Particles Dissolved by Plasma Surfacing
Study on Microstructure and Mechanical Properties of Hot Rolled Steel Plate Strengthened Complexly by Titanium and Molybdenum
Post-Process of Density Streaks Image of Flow Field in Supersonic Jet Device Captured by Laser Dual Hologram Interferometry
Effect of Mineral Mixture of Steel Slag and Blast Furnace Slag on the Properties of Cement
Anticorrosion Conversion Coating Content Lanthanum and Phosphate on Foam Mg Alloy
Microstructure Development of Twin Roll Cast AZ31 Sheet in the Pre-Deformation Deep Drawing Process
Al-0.90%Fe Alloy Sectional Solidified in a Gradient Magnetic Field
Experimental Confirmation of Ni5Al3 Phase in Ni-Al Binary System by Diffusion Couple Technique
Simulation of Grain Growing Process of Zinc-Aluminium Alloy under High Pressure
Influences of Acting Parameters of Electric Pulse Modification on the Al-22%Si-1.5%Cu Alloy
Microstructure and Micromechanical Property of C/C-SiC Composites
Development of 360 MPa Grade Heavy Plate with High Performance
Application on Statistical Value of Phase Structure Formation Factor to Fe-C Phase Diagram
Experiment Study Based on Nano-Ceramic Grinding Wheel Bond
The Vehicle Dynamic Load Indentification under the Excitation of Random Road Surface
Effects of Elastic Modulus Degradation on Simulation of Stretch-Bend Springback of Dual Phase Steel
Influence of Sn Content on the Microstructure and Dry Sliding Wear Behaviour of Hypereutectic Al-20Si Alloy
In Situ Observation of Solidification Behavior in a Q235 Steel by Using Electric Pulse Modification
Study on Inclusions in Ductile Cast Iron
Measurement System of Contact Angle between Molten Steel Droplet and Refractory Material
Crystal Growth during the Solidification Process of Continuous Casting Slab
Control of Liquid-Drop Surface Shape in Melt
Crack Tip Opening Displacement of X100 SAWL Pipe
Effects of Pulse Electric Field on the Clusters of Pb-Sn Molten Alloy
A New Wind Vibration Control Strategy Based on Active Variable Stiffness
Factors Analysis of Non-Aqueous Electrolytic Extraction of Ultrafine Non-Metallic Inclusions
Metallurgical Behavior of Adjusted Converter Slag in Reduction Process
Web Reinforced AZ91 Composites with Enhanced Strength and Plasticity
Effect of Boron on Microstructure and Mechanical Property of High Grade Pipeline Steel
Microstructure and Deformation Characteristics of X80 High Deformability Pipeline Steel
Theoretical Analysis of the Influence of the Electron Pulse Modification on Al-Cu-Mn Alloy Initial Aging Stage with Valence Electron Structure
Corrosion Protection and Composition of Galvanized Steel Substrates by Bis-[3-(triethoxysilyl)-Propyl]Tetrasulfide and Gamma-Aminopropyltriethoxysilane
The Effect of Temperature and Pulling Rate on Young's Modulus of Steel FAS390Q
In Situ Observation of Growth Process of d Phase of 0.15% C Carbon Steel during Solidification
Effect of Pulse Electric Field on the Columnar Crystals Growth of Al-5.6 Wt.%Cu during Unidirectional Solidification
Research of Shrinkage Process for Fe-0.18%C Cast Ingot during Solidification
The Effect of Mixture Parameter on the Properties of SCC
Microstructure Evolution of Cold Rolled Hot Dip Galvanized Dual-Phase Steel during Continuous Heating Process
Experimental Investigation of Formability Enhancement Using Hydraulic Counter Pressure Assisted Warm Deep Drawing
Deformation Behaviour of AZ31 Magnesium Alloy Sheets Produced by Twin-Roll Casting and Sequential Hot Rolling
Effects of Al Addition on the Microstructure of Fe-Mn-Si Ultra-Fine Grain Steel Welded Heat Affected Zone
Micronano Structure and Mechanics Behavior of Mosquito’s Proboscis Biomaterials with Applications to Microneedle Design
Semi-Solid Billets of AZ91D Magnesium Alloy Prepared by Forward Extrusion/Equal-Channel Angular Pressing
In Situ Observation on Fracture Behavior of 800MPa Grade Dual-Phase Steel
Effects of Different Melt Modification Techniques on the Structure and Properties of Silicon Brass
Molecular Dynamics Simulation Study of the Structural Evolution in the Cu-Ni Coalescence Induced by Ni Heterocluster
Effects of Electric Pulse Modification on the Hot Tearing of Al-5%Cu-0.8%Mn Alloy
Effect of Partitioning Temperature on Work Hardening Behavior of Q&P Steels
Influences of Melt Temperature on Casting Structure of Al-Cu-Mn Alloy Treated by Electric Pulse Modification
Non-Symmetrical Load Influence on Aluminum Alloy-Welded Joint Fatigue Limit
Bulk and (001) Surface Properties of TiAl3 Compound
Research on Stress-Strain Relationship Model of Concrete Prism Confined by GFRP
Corrosion Behavior of Zr53.5Cu26.5Ni5Al12Ag3 Bulk Amorphous Alloy in 3.5% NaCl Solution
Effect of Temperature on Geometric Accuracy of AZ31 Profile during Warm Pre-Tension Rotation Bending
II. Functional Materials
Characterization of Ag Doped P-Type ZnO Thin Films Prepared by Electrostatic-Enhanced Ultrasonic Spray Pyrolysis
Methods of Improving Shape Memory Effect of FeMnSiCr Alloy Pipe Joint
Heteroepitaxy of ZnO Films on Epi-GaN/Al2O3(0001) by MOCVD
Magnesium Incorporation in Sol-Gel Derived Apatite Coating on Ti6Al4V Substrate
Synthesis and NLO Properties of Calix[4]Arene Derivatives
The Blue Luminescence of CeCl3 Doped Aluminum Oxide Thin Film
Study on the Effects of the Self-Healing Microcapsules on the Tensile Properties of Polymer Composite
Oxidation Behavior of a New Ni-Base Superalloy in Air at 850°C and 950°C
Injection Molding Preparation and Film Formation Performance of Powders-Modified Polyethylene Biomass Carrier for Aerobic Process
Sensitivity to NO2 of ZnO Film Prepared by Electrostatic-Enhanced Ultrasonic Spray Pyrolysis
Study on Effect of Sintering Temperature on Microstructure and Compressive Property of Porous NiTi Alloys
Microwave Absorbing Properties of FeXCo1-X(x=0.7, 0.8) Alloys with Spherical Nanoparticles
Study on Preparation of SiO2 Optical Fiber Preform by SG Method
Fabrication and Sinter-Ability of Ce3+-Doped YAG Ceramics by Low-Temperature Combustion Method
First-Principles Study on Ga-N Co-Doped P-Type ZnO
Effect of BaO on Thermo-Physical Properties of Lithium Zinc Silicate Glass-Ceramics
In Vitro Behavior of Magnesium Apatite Coatings in Organic Modified Simulated Body Fluid
The PTCR Performance of Nb-Doped BaTiO3-NBT Ceramics
Synthesis and Lithium Storage Performance of Sn-Co/C Composite Anode Materials for Li-Ion Battery
The Magnetocaloric Properties of (Mn1-XFeX)5Sn3 Compounds Prepared in Magnetic Environment
The Magentocaloric Effect of Gd5Si2Ge2-XZnX Alloy
Structural, Electrical and Optical Properties of Li-Doped ZnO Thin Films Influenced by Annealing Oxygen Pressure
Study on Surface Oxidation Behavior of Pourous NiTi Alloy at High Temperature
Broadband ~1.5µm Emission of Er3+ in Heavy Metal Germanium Tellurite Glasses for Optical Fiber Amplifier
Synthesis of Nano Amorphous In2O3 by Microwave Method and its Photocatalysis
Up-Conversion Luminescence Properties of Gd2O2S:(Yb3+,Er3+) Nano-Particles Synthesized by a Co-Precipitation Method
Synthesis and Growth Mechanism of NbSe2 Nanostructures
Morphology Control of Cobalt Oxalate Particles under the Action of Pulsed Electromagnetic Field
Study on Preparation and Optical Absorption of Ge Doped TiO2 Composite Thin Films by Sol-Gel Method
Influence of Electrical Pulse on Shape Memory Effects and Phase Transition of FeMnSiCrNi Shape Memory Alloy
Study on the Influence of Different Pulse Temperatures on Al-22%Si Alloy Solidification Structure
Effects of Electric Pulse Treatment during Solidification on the Solidification Structure of Al-5%Cu Alloy
Analysis of Structural Condition and Thermodynamics Condition of Graphite Heterogeneity Nucleation in Cast Iron
Preparation of Pd-TS-1 Composite Membrane for Hydrogen Separation
Study on the Activation Energy of Nanocrystallization of Amorphous Fe78Si9B13 Alloy Treated by Low Frequency Pulse Magnetic Field
Fabrication and Characterization of Yttrium Lanthanum Oxide Transparent Ceramics Using Powders Prepared by Different Methods
Theoretical Calculation of ß Transition Temperature of Ti-6Al-4V from Valence Electron Level
The Promotional Effect of Lanthanum Additive on the Apparent Electrocatalysis of Ti/(Ru,Ir)OX Electrode
Hemocompatibility of TiO2 Nanoparticles Composite PTFE Coating for Medical Devices
Effect of Synthesis Conditions on Photocatalytic Activities of Nanoparticulate TiO2
Influence of Processing Parameters on Atmospheric Pressure Plasma Etching of Polyvinyl Alcohol Films
Photoluminescence of (Gd1-x,Dyx)2O2SO4 Phosphors Synthesized by Homogeneous Precipitation Method
Study of Modified Properties on Electrolytic Phosphate Coatings with Nano-Al2O3
Preparation of Special Microstructures by Polystyrene-Block-Poly(methyl methacrylate) Surface Micelles
Fabrication and Luminescent Properties of Eu3+-Doped Yttrium Lanthanum Oxide Transparent Ceramics
The Effect of Sc2O3 on Yb3+-Doped Y2O3 Transparent Ceramics
Spectral Properties of Pr3+:La2O3 Ceramics
The Preparation and Characterization of LaAlO3 Translucent Ceramics
Fabrication and Spectroscopic Properties of (Ho0.01La0.10Y0.89)2O3 Transparent Ceramics
Effect of Y Addition on Mechanical Properties of Ni50Mn28Ga22 Magnetic Shape Memory Alloy
Study on Polyethylene Glycol Acrylate Crosslinked Gels as Phase Change Materials
Study on the Preparation and Properties of PEG Phase Change Materials Fixed by Semi-IPN
High Responsive ZnO Nanowire UV Sensor
A Preliminary Study of Anodization and Electroless Ni–P Plating on AZ80 Magnesium Alloy
Automatic Setting Control of the Raw Slurry Blending Process Based on the Case-Based Reasoning
Study on Preparation of Gradient Porous NiTi Alloys by Powder Metallurgy Method
Effect of Post-Annealing Ambient on Electrical Structural Properties and Optical Properties of ZnO:Al Transparent Films
Surface Treatment of TC4 by Micro-Beam Plasma Arc
Part 2
III. Composite Materials
Investigation on the Wettability between Nb-Al Alloy and Porous Al2O3 Ceramics Prepared by Freeze Casting
Effect of SnO2 Coating on the Low Temperature Extrusion of 6061Al Matrix Composite Reinforced with Aluminum Borate Whisker
Simulating Study on Microwave Assisted Switching of Ferromagnetic Moment for Grains
Influence of Die Angle on the Extrusion Behavior of 6061Al Matrix Composite Reinforced with SnO2-Coated Aluminum Borate Whisker
Effect of Volt
