Contemporary Solutions in Applied Materials and Industry

Selected, peer reviewed papers from the 2013 2nd International Conference on Sport Material, Modelling and Simulation (ICSMMS 2013), January 20-21, 2013, Melbourne, Australia
Erscheinungsjahr 2013
ISBN: 978-3-03785-663-5
Verlag: Trans Tech Publications

Buch, Englisch, 686 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 200 g

The book cover current research results in “Research Efforts in Material Science and Mechanics Engineering” and is divided into 4 chapters: Chapter 1: Material Study, Physical and Chemical Processes in Materials; Chapter 2: Mechanics Engineering, Dynamics and Systems, Manufacturing Design Applications;Chapter 3: Structure Analysis and Mechanical Properties of Materials; Chapter 4: Material Technology and Design of Materials Applications.

Autoren/Hrsg.

Wu, Ming

Wu, Andy

Fachgebiete

• Medizin | Veterinärmedizin Medizin | Public Health | Pharmazie | Zahnmedizin Medizin, Gesundheitswesen Medizintechnik, Biomedizintechnik, Medizinische Werkstoffe
• Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde
• Technische Wissenschaften Sonstige Technologien | Angewandte Technik Medizintechnik, Biomedizintechnik

Inhaltsverzeichnis

Preface and Organizing Committee
Chapter 1: Research of Materials
Atomic Diffusion in the (001) Surface of Cu3Ag Ordered Alloy
Atomic Simulation of Size Effect and Surface Properties of Aluminum Nanoparticles
Research on Synthesizing Phenylic Phenolic Resin of Foundry Binder System
Study on the Effect of Ultrasonic in the Mixing and Cooking of Sizing Material
The Ageing Characteristics and Strengthening Mechanism of a Cu-2.1Ni-0.5Si-0.2Zr-0.05Cr Alloy
The Effects of Sintering Temperature on the Properties of Mg-Mn-Zn Ferrites
Study on the Silicone Coating with Heat Insulation and Resistance
The Prediction Model of the Mechanical Properties of Composite Materials Based on Ant Colony Neural Network
Quantitative Assessment the Physical-Mechanical Properties of Elastic Knitted Fabrics
Synthesis and Characterization of Fe2+-CTS/CA-CNTs Composite and its Magnetic Properties
Study on the Sewing Process of Automotive Seating Fabrics
Experimental Researches Concerning the Manufacturing of Titanium Alloy TA6V Powders Used to Selective Laser Sintering
Extraordinary Properties and New Functions of Nanocomposite Gels and Soft Nanocomposites with Unique Organic/Inorganic Network Structures
Photoluminescence Properties of Cd Doped ZnO Films Obtained by PLD
The Effect of Sputtering Power on the Properties of Zr-Ga Co-Doped ZnO Films by DC Magnetron Sputtering
Liquid-Phase Method Preparation of Water-Soluble ZnS:Cu2+ Nanoparticles and Luminous Performance Research
Health Risk Assessment of Six Heavy Metals in Different Sources of Honey Consumed in China
Effects of Fly Ash on Heavy Metal Uptake of Rice Growing on Multi-Metal Contaminated Acidic Soil
Design and Controllable Synthesis of Starch-Derived Magnetic Carbon Spheres with Hierarchical Pore Structure
Influence of Different Precursors on the Nitrogenation Temperature of Sm2Fe17
Determination of Weight Values for Assessment Indexes of Engineering Materials Based on Fuzzy Pairwise Comparison Method
Analysis of Microstructures and XRD of a Gradient Boron Alloyed Composite Material
Computational Analysis of Woven Fabric Impact Based on Hybrid Element Analysis
Application Research of New Type Fiber in Sports Equipments
Chapter 2: Biochemistry
Molecular Dynamics Optimization of a Computational Model of TACE and its Substrate Peptide
A Highly Sensitive Resonance Rayleigh Scattering Method for Platelet-Derived Growth Factor Using Aptamer-Nanogold Probe as Catalyst of the Cu2O Particle Reaction
An Immunonanosilver Resonance Rayleigh Scattering Spectral Probe for Rapid Assay of Human Chorionic Gonadotrophin
Surface-Enhanced Resonance Raman Scattering Spectral Probe Based on Functional Nucleic Acid and Nanoparticle
Synthesis of Chitooligosaccharide-Selenium and its Antioxidant Activity In Vitro
Chapter 3: Construction
The Fuzzy Reliability Analysis for the Super Wide Box Girder of New Jiujiang Changjiang River Bridge
Seismic Response Analysis for Shallow Tunnel in Different Earthquake Intensity
A Modified Davidenkov Model for Stiffness and Damping Characteristics of Saturated Clayey Soils due to Low-Amplitude Small-Strain Vibrations
Finite Element Analyze on the CFRP Steel Reinforced Concrete Filled with Steel Tube Column under Biaxial Load
Study on the Effect of Porosity on the Reflection Coefficient and Wave Pressure on the Partially Perforated Plates
Dynamic Response of Local Indentation of Sandwich Constructions under Low-Velocity Impact
Seismic Analysis on RC Frame Strengthened with CFRP
Characteristics of Earthquake Damage for High Core and Concrete-Faced Rock-Fill Dams by Shaking Table Tests
Model Test and Field Test of the Stability of Large Ultra-Deep Foundation
Seismic Performance of Moment End-Plate Connections to CFT Column under Cyclic Loading
Performance of an Interior Beam-Column Joint with and without a Slab under Cyclic Load
Analysis of Wave Loads on Pile-Group Foundation
A Comparative Study of Compressive Strength of High Strength Concrete by Replacement Ratio of Recycled Coarse Aggregate
Estimation of Compressive Strength of High-Strength Concrete with Recycled Aggregate Using Ultrasonic Pulse Velocity Method
Flexural Behavior of High Strength Reinforced Concrete Beams by Replacement Ratio of Recycled Coarse Aggregate
Experimental Study on Seismic Performance of the Reinforced Concrete Grid-Mesh Frame Wall
The Experimental Study on Frost Resistance of Gravel Concrete
Numerical Analysis of Frictional Resistance on Embedded Large-Diameter Cylinder
A Numerical Study on Block Shear Strength of Channel Four-Bolted Connections Fabricated with Austenitic Stainless Steel
Structural Behaviours and Curling Influence of Single Shear Cold-Formed Ferritic Stainless Steel Bolted Connections Fastened with Two Bolts
Wooden Buildings by the Fire Damaged of Toxic Gases on Personnel Evacuation Influences
Chapter 4: Industrial Manufacturing
Study on the Coating of Lost Foam Casting for Steel Casting
Setting Analyse of Cycle Time and Buffer Capacity of Car Shops Base on Simulation
Stigmergy in Scheduling Process of Holonic Manufacturing Systems
Research on Modern Technology and Sports Innovation Mechanism
The Research and Application of Utility Boiler Energy Efficiency Test System
The Development Technology Policy of Secondary Oil Recovery in the Overpressure Carbonate Reservoir
Application Research of Numerical Simulation in Physical Modeling Displacement Experiments
Water Locking Mechanics Characteristics and Countermeasures of Low Permeability Gas Reservoir
A High Density Fracturing Fluid System for HPHT Reservoir Stimulation Treatment
Chapter 5: Mechanical Engineering
The Doubly Fed Wind Power Generator Output Characteristic with the Asymmetrical Grid Voltage
Hydrokinetic Analysis of Crankshaft Main Bearings in High-Speed Gasoline Engine
Temperature Field Analysis of High-Speed Gasoline Engine Cylinder Head Based on Fluid-Solid Coupling
Quality Detection of Soybean Oil with Voltammetric Electronic Tongue
Comparison of Infrared Image Pre-Processing Technique on Electronic Power Equipment
3D MRO Job Card Publishing Method for Aircraft
Research on the Reasonable Air Velocity of Blast Furnace Tuyere
Study on Paper Electromagnetic Drying Rate
A Study on Heat Generation Control of a Precision Ball Screw Drive System
Fatigue Life Analysis of Lifting Mechanism Rod Based on Virtual Prototyping and FEM
Comparsion of Machining Stability of Up and Down Milling
Design and Simulation for Key Components of Robotic Flower-Seedling Transplanter
Elastic Rod Based Carpet Loop Pile Trajectory Simulation
UG Simulation Design of Electromagnetic Dryer
Heat Insulation Silicone Coating ANSYS Simulation Analysis
Simulation about Panel Edge Light Leakage
3D Dynamic Finite Element Simulation Analysis of Single Abrasive Grain during Profile Grinding with Axial Feed
Numerical Simulation of the Turbulent Flow in Ultra-Precision Aerostatic Bearings
Simulation Study of Heavy Vehicle Road-Friendliness under Bilateral Tracks’ Excitation
Numerical Simulation Study on the Hydrodynamic Performance of Two Blades of Canoes
Development of Canoe Equipments for Strength Training in Rowing Tank
Study on Friction Characteristics According to Drawing Variables in Press Drawing Process
Chapter 6: Mechatronics, Control and Information Technology
Parallel Driving for the Design of Humanoid Robot
A Multipath Cancellation Method Based on TK Operator for BOC Signals
A Simplified Detection Method for PN Sequence Acquisition and its Performance Analysis
Development of a Wearable Biofeedback Emotional Control Vest for Older Adult
Trajectory Planning of Delta Robot for Dynamic Tracking, Pick and Placement
Research on the Simulation of the Charge Mathematical Model of the Vehicle Starting Battery
Design and Application of the Wireless Grain Information Remote Monitor System
A Model Improvement of a Supercritical Unit Coordination Control System
The Application of Adaptive Kalman Filter in Traffic Flow Forecasting
A Study of Spinning Metering Pump Flow Rate Testing System
DFIG Virtual Inertia Frequency Control Strategy
The Simulation of Retinal Inner Plexiform Layer Based on Parallel Algorithm
Study on Numerical Simulation of a Fire on Heavy Oil Tank
The Agorithm Based on the Discrete Fourier Transform of Eye Detecting and Locating
Applying Service-Oriented Composition Process in TPMS
Modeling and Implementation of Inter-Campuses Equipment Optimized Management Based on WebGIS
Research and Performance Analysis on Parallel Computing of Remote Sensing Image Based on MPICH
Application of Electronic Bills of Lading in International E-Commerce
Supply Chain Risk Evaluation Based on Bayesian Network
Reserch on EC Security Problems and Countermeasures
Introduce an Evolutionary Programming Model - A Simulation of the Evolution of DNA Code
The Multi-Resolution Modeling of CTCS-3 Visualization Based on Meta-Model
Simulation of Bungee Jumping System and Open Experiment Teaching Using Simulink
Chapter 7: Medicine and Medical Engineering
Garment Production Process Optimization Based on the Splicing of Knitting and Tatting Fabrics
Outdoor Clothing Ecodesign Using Zipper as Functional Transformation Medium
The Influence on Movement Comfort of Fabrics through Functional Finishing of Natural Dyes
Wavelet Entropy Based Floating Thread Defect Detection for Tufted Carpet
Measure Energy Consumption Combined Heart Rate and Acceleration
The Study of Skeletal Muscle Weight Change on Female Elder Adults
Clinical Classification and Prognosis of Patients with Multiple Sclerosis in Northern China
Influences of Sufentanil Pretreatment on Ischemia-Reperfusion Injury in Rat Cardiac Apoptosis
Effects of Sufentanil Preconditioning on Myocardial Infarction Areas and the Myocardial Enzyme in Myocardial Ischemia- Reperfusion Injury in Rats In Vivo
Effects of Morphine Postconditioning on Myocardial Ischemia-Reperfusion Injury in Rats In Vivo
Epilepsia Partialis Continua Associated with Non-Ketotic Hyperglycaemia
Web-Based Safety-Oriented Healthcare System Using Innovation Process for Patient Safety
Knowledge Management and Semantic Technology in the Health Care Revolution: Health 3.0 Model
Analyses of University Staff Members’ Health Fitness - A Case Study on Asia University
Heart Sound Monitor for Bio-Signal Learning
Calculation of Lumped Parameter of Two-Port Network for Volume Conduction Energy Delivery