Applied Material Science and Related Technologies

Selected, peer reviewed papers from the 2014 3rd International Conference on Intelligent System and Applied Material (GSAM 2014), January 18-19, 2014, Taiyuan, China
Erscheinungsjahr 2014
ISBN: 978-3-03835-036-1
Verlag: Trans Tech Publications

Buch, Englisch, 1000 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1800 g

Collection of selected, peer reviewed papers from the 2014 3rd International Conference on Intelligent System and Applied Material (GSAM 2014), January 18-19, 2014, Taiyuan, China. The 218 papers are grouped as follows: Chapter 1: Advanced Technologies in Materials Science, Materials Processing and Metallurgical Technologies, Chapter 2: Biomaterials, Pharmacology and Technology of Tissue Engineering, Chapter 3: Building Materials and Technologies in Construction, Chapter 4: Exploration and Mining of Mineral Resources, Chapter 5: Materials and Technologies in Environmental Engineering, Chapter 6: Robotics, Control and Measurement Technology

Autoren/Hrsg.

Wu, J.H.

Huang, X.Y.

Fachgebiete

• Technische Wissenschaften Elektronik | Nachrichtentechnik Elektronik
• Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde
• Technische Wissenschaften Verfahrenstechnik | Chemieingenieurwesen | Biotechnologie Metallurgie
• Technische Wissenschaften Bauingenieurwesen Bauingenieurwesen

Inhaltsverzeichnis

Preface
Chapter 1: Advanced Technologies in Materials Science, Materials Processing and Metallurgical Technologies
Study on Effects of Organic Matter Concentrationon Engineering Ceramics Grinding
Second Order Two-Scale Method for Composite Plate with 3-D Periodic Configuration under Condition of Coupled Thermoelasticity
Optical Properties and SERS Activities of Thin Au Half-Shell Nanofilms on Glass and Silicon Substrate
Porous Anodic Aluminum Oxide Decorated with Gold Nanoparticles for Surface-Enhanced Raman Scattering
Influence of Ultrasonic Vibration on Grain Refinement of Pure Aluminum
Hydrothermal Synthesis and Photocatalytic Properties of TiO2/SnS2 Nanocomposite
Effect of the Ratio between Tension and Bending Vibration Loads on the Fatigue Behavior and Failure Mode of Titanium Alloy TA11
Effects of Annealing on Properties of (Na,Mg):ZnO Thin Films Deposited by Sol-Gel Method
Synthesis of PCEC-CaO-SiO2 Hybrid Materials by Sol-Gel Method
Development in Mechanics Research of Diamond Coatings/WC Interface Based on Molecular Dynamics Simulation
Wear Resistance of NiCoCrAlY Alloy Coating by Cold Spraying
Effects of NiO/TiO2 Mixed Nanoparticles on Quasi-Solid Dye-Sensitized Solar Cells
Synthesis, Characterization and Catalytic Performance of Titanium-Modified TUD-1 in the Hydrodesulfurization of FCC Diesel
Effect of [Al]s, [Mg], [Ca] in Molten Steel on Inclusion Content for High Speed Wheel Steel during LF-VD Process
Preparation and Characterization of Scalable and Multi-Functional High Conductivity Polymer Electrode Material
Hot Ductility Behaviors of HRB600 Vanadium-Containing Steel Rebar
Study on Hot Deformation Behavior and Constitutive Relation of Cr-77.5Nb Alloy
A Novel Oxynitride Phosphor Sr3-2ySiO5-6xN4x: yCe3+, yLi+ for White LED
Preparation of Solvent-Free Moisture Curable Heavy Anti Corrosion PU Coating
Analysis of the Mineralogical Characteristics at Different Temperature in the Process of Roasting Vanadium Slag
Synthesis and Characterization of a Novel Dendronized Polymer Bearing Azobenzene Moieties in the Side Chain
Hydrogen Storage Properties of LiNH2/MgH2 Complex Materials with Ti Catalyst by Mechanical Alloying
Study on Toughening of Chinese Herb Residue Fiber/Recycled ABS Composites
Effect of Tackifier on Thermal Oxidation Kinetics and Effective Storage Time of Raw Natural Rubber
Effects of Nanoclay and CO2 Content on Foaming Behaviors of PP/PS Alloys
Prediction of Tensile Properties of CNF/Epoxy Composites Using Artificial Neural Network
Research on a Zinc Flow Cell Prototype
I-V Characterization Study of Porous Silicon Formation by Doubled-Cell Electrochemical Etching
Anode-Supported LSGM Films Prepared by Slurry Spin Coating
Preparation and Characterization of NiO-LSCM/LSCM Dual Composite Anode for IT-SOFC
Preparation of Porous Silica Microspheres by Polymerization-Induced Colloid Aggregation Method
Research on the Numerical Simulation of Hot Stamping for High Strength Steel
The Preparation of Modified ZSM - 35 and its Catalysis Effect Analysis on N-Butene Isomerization
The Conductive of Composites Made from Polypyrrole and PBA-g-PMMA-GMA
Study on Polyphenol Oxidase Activity in Different Parts of Purple Sweet Potato
Study on the Process of the Reaction Catalyzed by Polyphenol Oxidase from Purple Sweet Potato
Progress in the Study of Flame Retardant Home Textiles
Nucleation Mechanism of IGF in the HAZs of Ti-Killed HSLA Steel
Influence of Overlapping Ratio on Microstructure and Mechanical Properties of Hardened Layer
Microstructures in Solidification Simulation of Electron Beam Scanning with MC in Molten Pool
Fabrication of Hexagonal Ni Micro/Nano Plates by a Facile Hydrothermal Reduction Route
Preparation of Epoxy Grafted Acrylate Composite Latex and its Film Property
Study on the Corrosion Resistance of Slag a-Sialon Ceramics to NaOH and HNO3
Experimental Study on Conduction Heating of Ultra-High Strength Boron Steel
The Uniform Elongation Experiment of Web and Flange of H-Beam
H-Beam Cross Sectional Microstructure Influence on its Mechanical Properties
The Rolling Deformation Characteristics of Rail with Corrugated Web
The Influence of Rolling Parameters on Metal Flow Law of H-Beam
Study on the Residual Stress in the Blooming Process of Large-Sized H-Beam
Study on Mechanical Properties of the Corrugated Waist Rail with the Dynamic Finite Element Method
Study on the Flange Spread of H-Beam
Structure Optimization of the Housing Fillet Using SA Combined with FEM
Research on Temperature Difference Controlling of Hot Rolling H-Beam
Multi-Objective Optimal Design Roller of Y-Type Mill Using Ga Combined with FEM
FEM Research on the Residual Stress of Corrugated Waist Rail in Hot Rolling
Cooling Effects of H-Beam after Rolling on Thermal Stress
Controlled Residual Stress Research of H-Beam
The Profile Curve of Tooth-Shaped Roller Influence on the Rolling Force of Corrugated Web Rail
The Simulation of Rolling Process of Bar
Application of Finite Difference Method in Modeling Quantum Dot Superlattice Silicon Tandem Solar Cell
DEM Analysis of Energy Loss in Elastoplastic Impact between Particles
Research on Different Loading Methods of the Multi-Roller-Pressing Flexible Stretch Forming
Cutting Parameters Effects on Cutting Properties Based on Cutting Temperatures
Effect of Micro-Injection Molding Process Parameters for Warpage in Micro Plate Devices
Chapter 2: Biomaterials, Pharmacology and Technology of Tissue Engineering
Effect of Iron on the Sinterability and Properties of HA/Ti-Fe Composites
Studies on the Way of Obtain Macroion C5H8O+ by the Ring of C7H12O+
Calculation and Study on C3H6+ Fragments by Cyclopentanone Ions of the Ring
Oral Rapid-Dissolving Polymeric Nanoparticles of Acetaminophen Fabricated Using Electrospraying
The Conjecture of Obtain C4H5O+ Fragments by Cyclicketone Ion Excited State
Type IV Dental Stone Incorporated with Antimicrobial Agents and its Physical Properties
Elastin-Like Polypeptides as Thermosensitive Polymer System
Local Delivery System Using Thermosensitive Hydrogel and Drug Loading Microspheres for Cartilage Repairing
Graphene Oxide Reinforced Degradable Polyurethane for Anterior Cruciate Ligament Tissue Engineering
Mixed Self-Assembled Monolayers Modified Electrode for the Detection of Human Neutrophil Elastase
Evaluation of DNA Detection Kit for Authenticity of Unibract Fritillary Bulb Based on Pharmacopoeia Method
Fabrication and Characterization of P34HB Scaffolds with Oriented Microtubules
Preparation and Characterization of Porous PLGA Scaffold for Tissue Engineering
Study on Milk Protein Hydrolysis of Infant Formula
Chapter 3: Building Materials and Technologies in Construction
Application of Energy Saving Technology in Roadbed Materials
Application of Ecological Building Materials in the External Layer Design for Building
Hysteretic Behavior Analysis of Stiffing Steel Plate Deep Beam
Optimization Design of a New Type of Insulation Structure
The Performance Evaluation of Modified Asphalt by Polyphosphoric Acid and SBS
LEFM Analysis of V-Notched Aluminum Plates Using Higher-Order Layerwise Model
Analysis of Plastic and Steel Sleeve Contact Force on ANSYS
Analyzing Remaining Life Non-Probability Reliability and Parameter Sensitivity for Pipeline Subjected to Corrosion
Analytic Study of Structural Stability for H-Section Column Made of Submarine Structural Steels Based on Boundary Conditions and Column Lengths at High Temperature
Microstructural and Microanalytical Study on Cementitious Materials Subjected to the Cyclic Sulfate Environment
Current Situation and Prospect of the Application of FRP in Material Engineering
A New Method to Determining the Strength Parameters of Fractured Rock Mass
Fluidity and Mechanical Behavior of Cement Solidified Lead-Zinc Mine Tailings
Development of Self-Anchored Cable-Stayed Suspension Bridge in China
Chloride Ion Diffusion Coefficient of HPFRCC after Loading
Application Analysis of Finite Element Method in the Calculation of Foundation Pit Excavation
Finite Element Analysis of Uniaxial Compression of Glazed Hollow Bead of Recycled Concrete Short Columns
Research on Factors Affecting Reinforced Concrete Durability
Axial Behavior of Concrete-Filled Double Skin Steel Tubular Stub Columns Filled with Demolished Concrete Lump
Chapter 4: Exploration and Mining of Mineral Resources
Theory and Practice on Non-Artificial Drainage of CBM High-Yielding Well
The Application of Improved Entropy Method in the Sustainable Utilization of Russia Oil Resources
Qingshankou-Formation Gravity-Flow Sedimentation in Early Cretaceous Songliao Basin of Northeast China: Evidences from Seismic Attributions Identification and Drilling Cores
Sedimentary Facies of the First Member of Qingshankou-Formation in Late Cretaceous Songliao Basin of Daqing Oilfield China
Conflict Resolution Strategy on Parameters Optimization in BTA Deep-Hole Processing
Investigation of Rare-Earth Salt Refiner on Purifying Effect of Impure Red Copper
Chapter 5: Materials and Technologies in Environmental Engineering
Preparation of Ammonium Iron Blue from Copperas and Ammonium Sulfate Wasted Liquid
Influence of Fe Doping on Ce-Mn/TiO2-ZrO2 Catalysts for Low-Temperature Selective Catalytic Reduction of NO
Experimental Analysis to Characterizing CO2 Emission of Roller
Review on Prepation and Application of Biochar
The Research on SO2 Desorption Equilibrium Mechanism of Sodium Alkali Desulfurization Regeneration Solution
Adsorption Characteristics of Zinc Ions onto PVDF-PAA Membrane
Photodegradation of Humic Acid and its Effect on the Property of Copper Binding
Treatment of Nitrobenzene Containing Wastewater by Titanium Oxide Photocatalyst
Study on Coaxial Pulsed Electroflocculation Treatment of Cd2+ in Gold Mining Sewage
Evaluation of Environmental Pollution from Asphalt Recycling Technology
Amorphous Zirconium Dioxide as a Potential Sorbent for Selective Removal of Phosphates in Aqueous
Chapter 6: Robotics, Control and Measurement Technology
The Power Smoothing Control of PMSG Based on Superconducting Magnetic Energy Storage
Design of Control System for the Ball Mill
On Multiple Model Adaptive Control Strategy Research of Ball and Plate System
Simulation of Brushless DC Motor Speed Control Using Phase Locked Loop Based on Noise Analysis
Modelling and Simulation of Inverse Kinematics for Planar 3-RRR Parallel Robot Based on SimMechanics
Neural Network Sliding Mode Control of 5DOFs Robotic Manipulator
Application Research of Numerical Control Machining Technology in Mechanical Manufacturing
Research on Automatic Correction Method for Cigarette Making Machine Transmission Device Based on Fuzzy-PID Dual Mode Control
The Design of Numerical Control all Attitude Integrated Gyro Test Turntable
PSO in Two-Wheeled Self-Balancing Robot Control Research
The Development of Control System for a Magnetorheological Finishing Prototype
The Development of Measurement and Control System for a Machine Tool
Dual Hydraulic Cylinders Synchronized Control Strategy
Motion Controller Design for Single Axis
Research on Gait Transition for Quadruped Search Robot Based on Kinetics Analysis
Research on Transmission Mechanism and Dynamic Regulation Mechanism for Quadruped Search Robot
Material Sorting Control System Design Based on Mitsubishi FX2N-48 MT PLC
Design of Bulk Solid Flow Control System
Research on the Micro Scope Condition of End Face of Liquid-Lubricated Mechanical Seals
The Control Strategy Study on Combined Mechanical and Electrical Braking of 8 x 8 Vehicles Driven by Wheel Hub Motor
Linear Analysis of Hydraulic Control System of an Electric-Hydraulic Proportion
Research on Household Intelligent Robot Based on Artificial Psychology
Research on Individual Monitoring System Based on PLC Technology
The Research on Intelligent Agricultural Information Monitoring System Based on Embedded Platform
A Study on Indoor Environment Monitoring System via WSN
Design of X-Ray Vision Automatic Testing System
Measuring System for Pipe-Flow Based on the Doppler Method
Design of High-Precision Measuring and Control System for Refrigerant with MSP430
Developments of X-Ray Grating Imaging Technology
Remote Monitoring System of the Rivers and Lakes' Water Quality Based on GPRS and 3G Technology
A Scheduler Design for Coordinating Network Control System Load with Redundancy
A Fault Tolerant Control for Networked Control System with Continuous Fault Estimation
Research on Power System Fault Diagnosis Technology
A Research on Automatic Detection Device for the Missing of the Roller Chain's Rollers and Sleeves
Study on the Angle Measurement of Laser Shaft Alignment Instrument
Research on the Topology and Control Policy of Composite Energy Feedback Cascaded Multi-Level Inverter
Design of Remote Control System for Water Saving Irrigation
Dynamic Analysis and Optimization for Wafer Handling Robot
Quantum Satellite Telecontrol System
High Voltage Circuit Breaker on-Line Monitoring System
A Monitoring System of Biochar Production Device Based on MCGS
Pulse Frequency Measurement Circuit for Infrared Laser
Controller Design for See-Saw Systems
Segmentations of Liver and Hepatic Tumors from 3D Computed Tomography Abdominal Images
Time-Domain Aeroservoelastic Modeling and Active Flutter Suppression by Model Predictive Control
The Realization of Actuating and Sensing Integrated Gripper System
Dynamic Neural Sliding Mode Control for Uncertain Nonlinear Systems
Neural Network Control for Uncertain Nonlinear Time-Delay Systems
Sorting Method Based on Rough Sets and its Application in Comprehensive Evaluation of Smart Grid
Model Predictive Control with on-off Input and its Application to Attitude Control
Analysis of Stability of Hopfield Neural Networks and Design of Impulsive Controller
Recognition of GIS Insulating Defect Types Based on Ultrasonic Detection
The Design of Online Water Pollution Monitoring System for Poultry Rearing
The Traceable Data Collection and Transmission Methods for Poultry Processing Quality
The Design of Shafting Condition Monitoring System for Rotating Machinery Based on Fiber Bragg Grating Sensor
A Software Platform for Water Environment Monitoring
Remote Video Web Monitoring System Design of Port Coastal Ships Based on UDP
The Patients Care Status Monitoring Based on the Visual Aids
BP Neural Network for Mobile Robot Self-Tuning PID Controller Design
The Application of 3D Laser Scanning Technology in Ginkgo Landslide Monitoring
The Research and Application of Artificial Intelligence in the Field of Intelligent Robot
Control Algorithms and Circuit of Interactive Mechanical Bionic Intelligent Robot
Research on Elimination of Electric Power System Fault Based on Electrical Engineering Automatic Control Technology
Simulation Experiment of Differential Improvement Based on PID Control Algorithm
Application of Virtual Network Electron Microscopy in Materials Science
Design and Study of Master-Slave Fast Online Monitoring System Based on the PC MUC
Mathematical Model and Algorithm Design of Computer Random Dynamic Nonlinear Force Detection
Smart Control for Wireless Indoor Lighting System Based on ZigBee Technology
Ill-Condition Controlled Maximum Likelihood Registration for Multiple Sensors
Robust Sensor Registration Based on Bounded Variables Least Squares
Dynamic Modeling and Nonlinear Decoupling Control of Inertial Stabilized Platform for Aerial Remote Sensing System
A Micro-Channel Oil Debris Monitoring Sensor Based on a Planar Coil and Two Solenoids
Abnormal State Identification for T Beam Based on Novelty Detection
A New DNA Based GA for Modeling a pH Neutralization Process with Fuzzy Neural Network
Score Model Based on Forward-Reverse Databases for Phosphopeptides Identification
Pre-Processing Influence on Near-Infrared Spectra for Determination of Volatile in Lignite Coal Samples
A Novel Control Algorithm for Maximum Power Point Tracking of Automatic Solar Lighting System
A Discussion of GPS Technology in Highway Bridge Construction
New Stability Condition for Linear Systems with Time-Varying Delay
Noise Analysis of the Photoelectric Detection Circuit and Research on the Error Compensation Method
The Design and Implementation of a New S-Curve Acceleration/Deceleration Algorithm
Design of Automatic Test System on Flight Control Electronics Set Based on PXI Bus
Automotive Fault Diagnosis Based on the Fuzzy Mathematics
Design and Implementation of Intelligent Tester for LED Backlight LCD Display Driving Power
Grid Information Synchronous Monitoring Algorithm under Unbalanced and Distorted Condition
Study on Regenerative Braking Control Algorithm
Modeling and Simulation of BLDCM Double Closed-Loop Control System Based on Matlab
The Design and Implementation of Virtual Digital Oscilloscope
Design of Networked Control System of Vehicle Body Based on Hybrid Scheduling Algorithm
Research of Gear Fault Comprehensive Diagnosis Method Based on Analysis of Vibration Signal
Fuzzy Control Based Study on Energy Management System of Electric Vehicle with Dual-Energy Storage System
Based on Analysis of Fast Simulation Algorithm for Multi-Objective BVR Attacking Fire Control System
Research on Real-Time Monitoring System for Traction Motor of EMUs
Research on the Positioning Technology and Attitude Solution Based on STM32
Vehicle Steering Stability Simulation Based on G-Vectoring Control
Electromagnetic Motion Device Based on LPC2131 of PID Control
Design on Mathematical Model of Genetic Algorithm Based on Artificial Intelligent Control of Mechanical Simulation
Robust Synchronization of Light-Emitting Diodes Networks via Sliding Mode Control
Design of the Counting System Based on Microcontroller
SOPC-Based Motion Controller with NURBS Interpolator
Wireless CNC Motion Controller Designed with PSoC
The Elastic Component Design for Measuring Internal Grinding Force
The Development of Profibus/Modbus Gateway in Aluminum Roasting Draught System
Research on Fault Diagnosis for Roller Bearings Based on MED and Slice Bi-Spectrum