Buch, Englisch, 824 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1600 g
ISBN: 978-3-03785-247-7
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preface and Organizing Committees
Chapter 1: Surface Engineering/Coatings
Mechanical Behaviours of Pumpkin Peel under Compression Test
Effect of Plasticizer of Sizing Agent on the Surface of Carbon Fibers and Interface of its Composites
Design of Gold Bead Chain Machine Based on Modern Design Methodology
Effect of Cold Reduction Ratio and Annealing Temperature on Microstructure and Mechanical Property of 240MPa Grade High Strength if Steel
Characterization of Micro-Arc Oxidation Coatings Formed on Biomedical Ni-Cr-Mo Alloy
Study on TC4 Titanium Alloy by Laser Oxygen-Diffused Hardening Process under Different Gas Atmosphere
Novel Functional Coating: Luminescent Coating
Mechanical Damping Properties of Silicone Rubber Prepared by Nano-SiO2 and AGE-Modified Polysiloxane Blends
Research on Key Technology of Ultra-High 3D Strengthening Heat Transfer in Plow Machining
Study on Properties of Electroless Ni-P Plating on 6063A Aluminum Alloy
Corrosion Resistance of Ni-CeO2 Nanocomposite Coating Prepared by Electrodeposition with Rotating Cathode in an Ultrasonic Field
Effects of Two-Step DC Electrochemical Pretreatment of Fine Grinding WC-Co Tool Surface on Morphology and Quality of Diamond Coatings
Research on Photoelectric Properties of Nanowires Doped DSSC
Design and Performance of the Transverse Rotating Magnetic Field Steered Arc Source Used in Vacuum Arc Deposition
Influence of Technological Parameter on Boehmite Sol Sealing Anodized Al 2024 Alloy
Fatigue Prediction for Pump End of High Pressure Fracturing Pump
Influence of Heat-Treatment on High-Phosphorus Ni–P Plating Coating
Effects of Oxide Powders and Nanocrystalline Particles on the Sintering of Al2O3 Glass-Ceramics
The Relationship between Substrate Roughness and Wettability of Superhydrophobic Metal Carboxylate Surface
Review of Technology and Industry on Inorganic Non-Metallic Materials
Growth Characteristics, Microstructure and Corrosion Resistance of Micro-Arc Oxidation Coatings Fabricated on ZK60 Mg Alloy under Two Steps Voltage-Increasing Mode
Study on a Quinoline Inhibitor Used for Sulfur Corrosion on Carbon Steel: Properties Research and Field Test
Effect of Phosphating Additives on Corrosion Resistance of Phosphate Coatings on AZ91D Magnesium Alloy
Fabrication and Characterization of Cellulose Acetate Ultrafine Fiber Containing Silver Nanoparticles by Electrospinning
The Optical Properties of DLC Films Processed by Laser Radiation
Study on CO2 Emission in the Process of Dealing with Vanadium-Titanium Magnetite
Ni-Induced Lateral Fast Crystallization of Amorphous Silicon Film by Microwave Annealing
Preparation and Performance of Zr(Ca)-Al-O-N Composites by Reaction Sintering of Al-ZrO2(Ca) in N2 Atmosphere
Learning the Distribution Characteristics of Critical Machines in Production Scheduling Problems
Experiments on Preparation of Cutting Tool Edge Using Abrasive Water Jet
The Synthesis of Novel Chiral Organic Light-Emitting Material: 2R,3R-Di(tert-Butanesulfiny)Thiophene
The Evaluation of Storage Lifetime of Vulcanized Nature Rubber Dried by Microwave Using Thermogravimetric Point Slope Method
Effect of Cassava Starch Destructuration to Mechanical Properties of Compostable Blends
Study on Sintering Process of Magnetic Abrasive Particles
Chapter 2: Modeling, Analysis and Simulation of Manufacturing Processes
The Influence of Forming on Collision Performance of TRIP780 and HSLA340 Steel Parts
Simulation of Recrystallization Behavior and Austenite Grain Size Evolution during Hot Deformation of Low Carbon Steel Using the Flow Stress
Morphologies and Mechanical Properties of Epoxy Resin/Polymethyl Methacrylate Interpenetrating Network Modified with Kaolin
Numerical Simulation on Temperature History during Cooling Process of Wire Rod
Numerical Simulation and Defects Analyses of Titanium Aluminide Based Alloys Powder Forging
Material Modeling and Correlative Mechanical Testing on AHSS Sheet Forming Simulation
Time-Varying Characteristics of Bending Deformation of Work-Piece in the Turning Process
The Research for Electro-Hydraulic Servo Control System Based on Fuzzy PID
Research on Hot State of Mould Copper Plate with High Casting Speed
Finite Element Analysis of Pump Casing for Triplex Plunger Pump Based on Abaqus
Analytical Solution on the Relation of Technique Parameters for Continuous Casting with Heated Mould
The Simulation of Compression Performance of Aluminum Foams Base on DEFORM
Improvement of Die-Roll Quality in Compound Fine-Blanking Forming Process
Feasibility Study on HRS Substituting CRS of Automobile Inner Panels Based on Numerical Simulation and Field Test
CV Control Chart Using GWMA Technique
Effect of the Welding Heat Input on Residual Stresses in Butt-Weld of High-Speed Train
Numerical Simulation on Forced Revolving Moving Boundary Problem Using Incompressible SPH (ISPH)
Multi-Physics Simulation of Amorphous Silicon Thin-Film Deposition in Plasma Enhanced Chemical Vapor Reactors
Numerical Simulation for Thick-Walled Hollow Axle during Cross Wedge Rolling
Integrative Technology Evaluation Model (ITEM) for Selective Laser Melting (SLM)
Studies on Corrosion Behavior of Q235 Steel by Iron Bacteria, Sulfate-Reducing Bacteria and Total General Bacteria in Sedimentary Water of Storage Tank
Characterization the Relationship between Rheology Behavior and Moleculer Weight of Natural Rubber with Different Protein Content
Comparative Study of the Two Bar Billets for Bevel Gear Based on Multi-Objective Comprehensive Assessment
An Optimization of the New Die Design of Sheet Hydroforming by Taguchi Method
Comparison of the Effects of Bias Voltage and Transverse Magnetic Field on the Macro-Particles Distribution on the Surface of TiN Films Prepared by Arc Ion Plating
Simulation Study on the Frame of Pipe End Upsetting Machine and its Structure Optimization
A Numerical Method to Predict Packing Density of Aggregates in Concrete
Chapter 3: Materials Forming/Machining/Joining
Preparation and Characterization of Mesporous ZrO2 Particles
The Research of the Extrusion Hot Embossing Process
A Calculation Method of m Based on Processing Map
Finite-Element Analysis of the Double Lateral Compression of Clad Tube into a Symmetric Square-Tube
Brazing RB-SiC Used in Large Aperture Space Optical System
The Influence of Welding Speed for Aluminum 6063 and Aluminum 7075 by the Friction Stirs Welding
Analysis of Optimal Vertical in Angular U-Bending Process
Optimisation of Die Radius Geometry in Sheet Metal Stamping
The Mechanical Properties of the Superplastic Zn-22Al Alloy at Different Processings
Influence of the Alloying Elements on Phase Transitions of High Strength Steels
Research on the Predicted Model of the Surface Roughness in Dry Turning Hardened Steel
Study on Self-Reinforcement of High-Density Polyethylene Extruded with Vibration in Low Temperature
Application of Finite Element Software in Fatigue Analysis of the Welded Joints
Characteristics of Electrode Displacement and Force in Resistance Spot Welding
Structure and Optical Properties of Mg0.5Zn0.5O Films
Influence of Cutting Conditions on the Cutting Performance of TiAl6V4
The Joining of Oxide Ceramics with Quartz Fiber by Interlayer
Technology on Fabrication of Precise SiC Aspherical Mirror
Interfacial Reaction and Solderability of Zn20SnxCu Solder
Study on Thermoplastic Materials and Absorbing Agent in Laser Transmission Welding
Numerical Simulation of Ti-6Ai-4V Channel Part in Hot Forming Process
Influence of Ultra-Fast Cooling Technology on Microstructure and Mechanical Properties of Ti-Microalloyed Steel
Study on the Solid Edge Banding Cracking of Panel Furniture
Analysis of the Effect of Sand Size and Vibration Time on Surface Roughness in Lost Foam Casting of LM6 Alloy by Design of Experiments
Optical and Electrical Properties of Some Organic Thin Films for Optoelectronic Applications
Mechanical Analysis of Machining Error in Turning Slender Shafts by Reversible Turning Technique
Study on FGH95 Superalloy Prepared by Spray Forming
A Fluidity Study of Semi-Solid Rheo-Slurry of AC4C Aluminum Alloy in Gravity Sand Casting
A Development of Lancing Engineering Method for Lamp-CAN Stamping Process by Using Forming Analysis
Tensile Properties and Microstructure of Butt Weld of Q235A Steel Made by Wet Welding Process
Thickness Distribution and Forming Strategy Analysis for Two Point Incremental Forming with a Male Die
Anti-Extrusion Process in the Performance of Different Parameters on the Analysis of Metals
The Effect of Single Pulse, Double Pulse and ForceArc MIG Welding Technology on Mechanical Properties of Welding Joint for 5083 Aluminum Alloy Used in High-Speed Train Body
Experimental Study on the Influence of Nozzle Diameter on Abrasive Jet Cutting Performance
Novel Method to Strengthening of Polymer by Plane Compression Processing
A Study on the Polishing Mechanism of Silicon Carbide (SiC) Optic Surface
Deflection Analysis of the Thin-Web Workpiece Structure Using Similarity Concept
Development of In-Process Chip Breaking Detection by Using Cutting Force and Temperature Signals
The Properties Research of Hafnium Plate for Control Rod
Design of Plastic Injection Mold for the Crisper Cover
Speed Detection of Rig Lifting System
Fatigue Crack Growth Rates in Friction Stir Welding Joints of 7075-T6 Al Alloy and Fatigue Life Prediction Based on AFGROW
Tandem Gas Metal Arc Welding for Low Distortion Butt Welds
Effect of Heat Input on HAZ Properties and Microstructure of SMA490BW Corrosion Resistance Steel
Study on the Grade-Controlled Filling of Vacuum Counter-Pressure Casting Thin Wall Aluminum Alloy
The Frontier Analysis of RCS for Micro-Nano Particle
Structural and Optoelectrical Properties of Aluminum-Doped Zinc Oxide Thin Films for Organic Photovoltaic Cells
Researches of Warm Extrusion Forming Technology and Property on 42CrMo Steel Cutting Pick
The Research on Lunar Soil Simulant Production System
Effects of Different Fluxes on the Spreadability of Zn-20Sn Solders
Lubricating Performances of Nano Organic-Molybdenum as Additives in Water-Based Liquid during Cold Rolling
Casting of a Wire Inserted Strip Using a Twin Roll Caster Equipped with Two Nozzles
A Study and Analysis on Electromagnetic Compression Forming Processed Aluminum Alloy Tubes
Stiffness Analysis of Spot-Weld Specimen in Finite Element and Experimental Comparison
Effect of Electromagnetic Field on the As-Cast Structure of HMn084 Brass
Foundation and Application of Fluid End’s Vibration Model for Drilling Reciprocation Pump
Study on NC Machining of Parts with Rotational Characteristic
Investigation on the Residual Stress Redistribution under Cyclic Loading
Buckling Analysis of Stitched and Unstitched Glass Epoxy Composites
Effect of Alloying Element Addition on Transition Interface Reaction Zone in Metal Matrix Composite Processing by Cast Infiltration
NOX and Soot Emissions Numerical Simulation of Diesel Engine Fueled with Biodiesel
Root Cause Analysis on Fracture of SN490B Steel Column-Diaphragm Joints Using Elector-Slag Welding
Properties of Hexagonal Wurtzite Mg0.33Zn0.67O Films on Quartz Glass Substrates
A Design for FSS on Curved Band-Pass Radome
Magnetic Pulse Forming of Thin-Aluminum Sheet Using Bar-Forming Coil
Chapter 4: Mechanical Behavior & Fracture
Cause Analysis of Buttress Premium Thread Connection Pullout for a Well
Finite Element Analysis of the Effect of Hardness on Contact Stresses in Port Crane Wheel
Study on Layered Processing Theory of Slender Inner Helical Surface
Study on Calibration for Parameters of Johnson-Cook Constitutive Equation
Study on Bending Mechanical Mechanism of ARB Specimen Based on Randomness
FEM Analysis of Solid Particle Erosion-Wear of 45 Steel
Different Failure Styles for Aluminum-Alloy Strip with Two Holes under Cyclic Tensile Loading
Failure Analysis of U71Mn Rail Welded Joints
Failure Analysis of a Welded Aluminum Alloy Component in High-Speed Train
Fatigue Crack Behavior of Welds in Q460NH Steel
Perforated Functionally Graded Plate with Arbitrarily Radial Variation of Young’s Modulus under Pure Shear
Effect of Emission Points on Ultrasonic Testing Accuracy of Log Internal Decay
Unsymmetrical Cycle Fatigue Analysis of Titanium Alloy Blades under Multi-Level Loading
First Principles Calculation on Adsorption of S on Fe(100)
Modeling and Simulating Long-Stroke Valve-Controlled Asymmetrical Cylinder Based on MATLAB/Simulink
Deep Drawing Formability Analysis of AZ31 Mg-Alloy
Design of the CY7C68013 Firmware Program for Data Collection and Parameter Control
Infrared Changes in the Progressive Failure and Stress Distribution of Bolted Rocks
Finite Element Analysis of Machine Tool Bed
Chapter 5: Tooling Testing and Evaluation of Materials
Influence of Microstructure of TC11 Titanium Alloy on Ultrasonic Velocity and Attenuation
A Study on Strain Properties of Bamboo in Process of Heating and Cooling
Wear Behaviors of PCD Tools in Turning Granite
Study on the Mechanical and Physical Properties of Lotus Kernels
Compare on the Main Physical and Mechanical Properties of Two Bamboo Particle Boards
Scientific Analysis of an Ancient Bronze Mirror Dating of Han Dynasty
The Application of Electrical Contact Resistance Test in Corrosion Characterization
A Study on the Protective Performance of Viscous Organic Layers Based on EIS
The Influence of Water in Fuel Tank Environment on Fatigue Property of Pre-Corroded 7XXX Aluminum Alloy
Study of Assessment Method of Aviation Material Readiness
Material Characterization and Modeling of High Strength PM Steel
Hot Strip Rolling State Analysis Based on Geodesic Distance Spectral Clustering
Experimental Study of Thermal Contact Conductance with Compensation Heater
Study on Mainstream Smoke Characteristics and their Risks of Low Ignite Propensity Cigarettes
The Action Mechanisms of BIMGCS12-3 as Corrosion Inhibitor of Mild Steel for Vitriolic Acid Pickling
Lifting Pipeline Buckling under External Pressure Base on Imperfect Reason
