Multi-Functional Materials and Structures II

Erscheinungsjahr 2009
ISBN: 978-3-908454-73-1
Verlag: Trans Tech Publications

Sonstiges, Englisch, 2374 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g

With the rapid development of science and technology, the functionalization of structural materials, and the structurization of functional materials are attracting increasing attention in the scientific and engineering fields. The development of multi-functional materials and structures (MFMS), at the micro- and nano-scale levels, has grown rapidly due to the requirement of increasing safety margins for all infrastructure, biomedical and engineering elements. Multi-functional material systems are capable of performing multiple ?primary? functions, simultaneously or sequentially in time, and are specially designed to improve system performance via a reduction in the redundancy between sub-system materials and functions.

Autoren/Hrsg.

Yin, Yan Sheng

Wang, Xin

Fachgebiete

• Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde

Inhaltsverzeichnis

Study on Vibration Band Gap Characteristics of Phononic Crystal Consisted of Ti and RubberStudy on Wheel/Rail Interaction Force Real-Time Monitoring Method Based on Piezoelectric Sensing TechnologyStudy on Thixo-Die-Forging of 37vol.%Al/Al2O3 Composite in Pseudo-Semi-Solid StateNiCr Electrically Conductive Coatings on Cotton Fabric by Electron Beam Evaporated DepositionSelf-Hardening Calcium Phosphate Composite Scaffold for Bone Tissue Engineering Effect of Different Fillers on Microstructure and Mechanical Properties of Ultrahigh Molecular Weight Polyethylene CompositeThe Micro Physical Mechanism Study of Metal Rubber Material on Compressive PerformanceInfluence of Thickness Parameters on 2-2 Cement Based Piezoelectric CompositeNon Destructive Evaluation Based on Impedance Method Using Embedded PZT SensorFactors Influencing Adsorption of PH3 on Modified Activated CarbonSynthesis and Performance Study of Polybasic Starch Graft Copolymerization Function MaterialsA New Way to Manufacture a Carbon Nanotubes SupercapacitorSynthesis of Hydroxyapatite in Microemulsion and its Adsorption Properties for Human Serum AlbuminExperimental Investigation on the Embracing Force of Medical Ni-Ti Memory Alloy Arm-Embracing FixatorMonitoring Beam-Column Joint in Concrete Structures Using Piezo-Impedance SensorsStructural Parameters Identification Using PZT Sensors and Genetic AlgorithmsStructures and Solid-Liquid Phase Transition of High-Density Hydrogen Confined in Single-Walled Carbon NanotubesEffect of Fly Ash and Slag on the Resistance to H2S Attack of Oil Well CementStudy on Filtration Performance of Cylinder Metal Rubber Filtering MaterialTemperature Control Using MR Fan Clutch for Automotive Application Wear Characteristics of Magnetorheological Fluid under Boundary LubricationAnalysis of Water Transport Properties for Plant Structured Textile FabricThe Energy Transition on Superhydrophobic Surface by Electrowetting ControlResistivity Study on Early Hydration Process of Phosphoaluminate Cementitious MaterialChloride Ion Diffusion of Phosphoaluminate Cement ConcreteSystem-Level Modeling of Piezoelectric Energy HarvestersMorphology Characterization and Optical Properties Analysis for Nanostructured Lanthanum Hexaboride PowdersPreparation of Ultra-Fine MgO?Al2O3 Spinel Powder and its Metallurgy Behavior in Medium Carbon SteelStress Corrosion of High Performance Hybrid Fibers Reinforced Expansive Concrete Exposed to Magnesium Sulfate SolutionEffect of Li on Al-Si Alloys Structure and PropertiesResearch on LSCMCo-CDC Composites as Improved Anode Material for IT-SOFCLow-Velocity Impact Characteristics of Carbon Fiber Composites Lattice Core Sandwich StructuresSynthesis of Spherical Mesoporous Co-MCM-41Crack Crazing Patterns Interaction Based on Damage CriteriaMicrostructural Morphology and Phase Structure of Rapidly Solidified Hypereutectic Al-Si AlloysEffect of Ti, Al and Mg Addition on the Impact Toughness of Heat Affected Zone in Low Carbon SteelStudy on the Feasibility of Bacterial Cellulose as Tissue Engineering ScaffoldInfluence of Network Structure on Dynamic Mechanical Properties of Cross-Linked Polystyrene / Glass Fiber CompositesMicro Electrochemical Polishing of TiNi Alloy for Medical StentRolling Processes and Performance of Cu-Fe In Situ CompositesResearch of Electromagnetic Wave Absorbing Characteristics of Structures Consisting of LHM and RHMEffect of Rolling Technology on the Microstructure and Properties of High Active Aluminum Alloy AnodeActive Friction Control Based on Electrorheological EffectEffect of Steel Slag Powder on the Durability of High Performance ConcreteEffectiveness of Steel Slag Powder on Suppressing Alkali Aggregate Reaction of ConcreteEffects of Boron, Silicon on Structure and Properties of Fe-Based Superalloy Magnetic Shape Memory Alloy and Application in Structural Vibration ControlMelt Temperature Dependence on Glass Forming Ability of Al-Mg AlloysStudy on the Viscoelastic Property of Soybean Protein FibersMicrostructures of the Fiber-Round Hole of the Chafer CuticleEffects of Electric Pulse Modification with Different Technique Parameters on the Liquid Structure of Pure AluminumInfluence of Aggregate Gradation on Mechanics Performance of Strain-Hardening Cement-Based Composites (SHCC)Properties of Multiple-Functional Cationic Silk FabricsDirect Characterization of Various Deformation Microstructures in Metals by Electron Channeling Contrast Technique in SEMPreparation and Blood Compatibility of Epoxidized Castor Oil-Based Polyurethane/Chitosan Biomedical MaterialsCharacteristics of a Extracellular Bioflocculant from a Serratia plumuthica IsolateStructure and Electrical Properties of PSN-PMN-PZT Piezoelectric Ceramics for Underwater Acoustic TransducerInternal Friction of Ti-Rich Ti-Ni-Cu Melt-Spun RibbonStrength Evaluation of Green Composite with Variation in Cross-Sectional Area of Plant-Based Natural FibersStrengthen of Porous Al2O3 Ceramics by Adding Nanoparticle ZrO2 AdditionFly Ash-Activated Carbon Powder Composites for Dyes and Heavy Metals Removal Simultaneous Adsorption of Methyl Orange and Heavy Metals from Solution Using Fly AshOptochemical Film Sensor for the Determination of Free Chlorine in WaterStudy on the Tribological Properties of the Diesel Engine?s Lubricating Oils Containing NanoparticlesA 300 kHz High-Frequency Underwater TransducerDevelopment of Fiber-PZT Array Sensor SystemInfluence of the Axial Inserted Yarns on the Mechanical Properties of Multi-Angled Filament Wound PipesSynthesis and Characterization of Poly(D,L-Lactide)-Based Shape Memory PolymersHigh-Strength Porous Ceramics Produced by Recycling Glass Fibers in Waste GFRPPreparation Process Optimization and Characterization of an Ultra-Hard Al-Mg-B MaterialVirtual Experimental Studies on Carbon Fiber Smart Materials Resistivity Tomography Research on the Low Temperature Degradation Resistance of TiN/3Y-TZPA New Type of Rubber Sandwich Coated Onto Ship for the Use of Underwater Explosion Shock MitigatingPreparation of MgCl2-Coated Activated Carbon and its Adsorption Behavior of Azo Dye from Aqueous SolutionExtrusion and Evaluation of Saw Dust-Recovered HDPE Composite BarsNickel Ferrite Nanocrystallites Synthesized by Sol-Gel and Coprecipitation Methods: A Comparative StudySynthesis and Electromagnetic Properties of Polyaniline Nanofibers Using Polyglycol as ?Soft? Template in the Aqueous EthanolUltrasonically Assisted Synthesis of Tin Sulfide Nanorods at Room TemperatureNanostructure of 45# Carbon Steel by High Current Pulsed Electron BeamDegradation of MTBE by Using a Novel Magnetic Composite TiO2/Fe3O4 Photoreactor DesignStudy on the Preparation Technology of CuO Nanometric Powders by Homogeneous Precipitation in High Intensity Ultrasonic FieldPreparation of F-Zn-Codoped TiO2 Nanoparticles and its Applications in Photodegradation of Methylene BlueTribological and Thermal Properties of Hybrid Kevlar/PTFE Fabric Composite Filled with Nano-TiO2Preparation of La2Ce2O7 Nano-Powders by Molten Salts MethodSelf-Assembled Nano-Structures of Sandwich-Type Mixed (Phthalocyaninato)(porphyrinato) Rear Earth Complexes. Effect of Porphyrin-Phthalocyanine Ligands on Tuning the Inter-Molecular InteractionMechanical Properties of Dental Nanocomposites Reinforced with Polyhedral Oligomeric Silsesquioxane(POSS)Electromagnetic Properties of Nanometer SiC/CNTs CompositeProperties of Carbon Nanofibers Prepared from Polyacrylonitrile/Poly(methyl Methacrylate) BlendPreparation, Characterization and Photocatalytic Performance of Nano-TiO2/DiatomitePreparation and Characterization of Ordered Pb(Zr0.53Ti0.47)O3 Nanotube Arrays by Sol-Gel Template MethodRelative Humidity Sensing Studies of WO3-ZnO Nanocomposite Nano Fabrication Technology of Selective Removal and Optical AssistanceLarge Scale Synthesis of BaTiO3 Nanorods by a Template WayMechanical Nanocrystallization Surface Treatment on the Reheated 400MPa Ultrafine Grained SteelImproved Preparation Technology of Urea Formaldehyde Microcapsules Used in Electrophoretic DisplayPreparation and Characterization of Hollow TiOX Nano-Spheres for Electrophoretic Displays
In Vivo Biocompatibility Studies of Nano TiO2 MaterialsEnhanced Bioactivity of Sandblasted and Acid-Etched Titanium SurfacesMicrostructure and Hardness Characterization of a NiCr/Cr3C2 Coating by High-Velocity Oxy-Fuel Thermal SprayingPreparation of Phosphorylated Chitosan/ Chitosan/ Hydroxyapatite Composites by Co-Precipitation MethodRapid Synthesis of Eu2Zr2O7 Nanocrystals via Salt-Assistant Combustion MethodInvestigation on Recycling Technology of Carbon Fiber Reinforced Epoxy Resin Cured with AmineMicrostructure of Ultrasonic-Electrodepositing Nano-Silver CoatingsMechanical Properties of Carbon Nanotubes Reinforced Natural Rubber CompositesSolvothermal Synthesis of Nanostructured Flakes a-Ni(OH)2 Microspheres for Electrochemical CapacitorsFabrication of Metal Matrix NanocompositesStructure and Wear Properties of Nano-Silicon Dioxide Modified Polyacrylate CompositesSynthesis and Thermal Stability of One-Dimensional Titanate NanotubesWound Healing Based on PU/Hydrogel Nanocompounds Containing FGF-2 and Related Dressings by Radiation MethodThe Application of Nanotechnology/Ultrafining Treatment Technology in the Preparation of Ultrafine ExplosivesNanostructured Ferrite Formation in Borosilicate GlassSynthesis of Ag-Cu-Sn Nanocrystalline Alloys as Intermediate Temperature Solder by High Energy Ball MillingFabrication and Optical Properties of Mn-Doped ZnO NanowiresThree-Dimensional Zinc Oxide Nanorod NetworksEffect of Carbon Fiber Composite Material Casing on Blast Power of Explosive ChargeHydrothermal Synthesis and Characterization of Nanocrystalline Anatase Titania from Ti(OC4H9)4The Rheologyical Effect of Carbon Nanotubes on the Iron Based Metal Powder Injection Molding FeedstockLaser Cladding NiCrBSi+2%B4C Coating on Ti-6Al-4VFabrication of TiAl/B4C Composites from an Al-Ti-B4C System Reinforced by TiC, TiB2In SituFabrication and Photoelectric Properties of CdTe/TiO2 Nanocrystals MultilayerSelf-Assembly of PPV/CdTe Nanocrystal Complex for Photovoltaic DeviceMicrostructure, Mechanical Properties and Thermal Stability of TiAlN/Si3N4 Nano-Multilayer Films Deposited by Reactive Magnetron SputteringSynthesis and Characterization of Methyl-Red/Layered Double Hydroxide (LDH) NanocompositeSurface and Composite Interface of Carbon Fiber Modified by Grafting of DiethanolamineControlled Fabrication of Nanocomposite with Ni Deposition on the Template of SiO2 Particles and its Magnetic PropertyPreparation and Properties of Fe3O4/PMMA Nanocomposite FilmsPreparation of Nanometer MgO by Ion Exchange Resin MethodFluorescence Silica Nanoprobe as a Biomarker for Rapid Detection of Plant PathogensSynergy Effects of Electrospun Polysulfone/CNTs Hybrid Nanofibers Toughened and Reinforced EpoxyA Novel Low Infrared Emissivity Material by Ni-P-CB Electroless NanocompositeTiO2 Hollow Spheres Obtained under Autogenic Pressure at Elevated TemperaturePreparation of Multifunctional Carbon Nanotubes/Magnetite NanocompositesContaining Manganese DMSs Nanostructures via a Nonaqueous RouteSynthesis and Properties of Acrylic Emulsion with Core-Shell Structure in Antifouling PaintsEffect of Samarium on the Photocatalytic Property of Sm-TiO2/CNFs CompositesRole of Alkali Treatment on Mechanical and Thermal Properties of Bamboo Particles Reinforced Polyvinylchloride CompositesUltrasonic Effect on Refinement of Mg2Si and Mechanical Properties of In Situ Al-Mg-Si CompositesPreparation and Mechanical Properties of Epoxy Resin Reinforced with Jeffamines-Grafted Carbon NanotubesMulti-Functional Nanoscaled Film Deposited on PET Non-Woven by SputteringSynthesis and Electrochemical Properties of Nanorod Polyaniline/Activated Carbon Composites for Electrochemical CapacitorFabrication of SiO2@Au Core-Shell Multi-Functional Nanoparticles (MFNPs) for Imaging and ThermotherapySynthesis and Characterization of a-Al2O3 Nanocrystalline Powders by Low Temperature Combustion MethodThe Effect of Heat Treating on the Microstructure and Mechanical Properties of Cr-Cu-N Nanocomposite Thin FilmsBending Strength of Sandwich Beams with Nanocomposites CoreFabrication and Characterization of Titanium Based NanotubesMethane Catalytic Cracking to Make COx Free Hydrogen and Carbons (Nanotubes, Microfibers, Microballs)ZnS:Ag Luminescent Nanoparticles Synthesized with Different Molar Ratio of S/ZnRietveld Refinement of the BaTiO3 from X-Ray Powder DiffractionHydrothermal Synthesis and Characterization of CeO2:Eu3+ NanopowdersSynthesis and Characterization of Cu2O/TNTs NanocompositesAnti-Wear and Friction-Reducing Behavior of Nano-ZrO2 AdditiveStudy on the Surface Modification and Dispersion of Multi-Walled Carbon NanotubesFirst-Principles Study of Lithium Absorption in Boron- or Silicon-Doped Single-Walled Carbon NanotubesHydrothermal Synthesis of BaTiO3 Nanotubes on Ti SubstratesFacile Synthesis of ZnO Nanorod and NanosheetCharacterization of Diamond-Like Carbon Coating on 16Cr-1C Martensitic Stainless Steels Effect of Al2O3 Powders on Properties of Electrodeposited Ni MatrixEffect of Sputtering Input Power of Co on Structure and Magnetic Properties of Fe-Co-N Thin FilmsAlkylphenol Modified Phenolic-Latex Film and Effect of Humidity and Temperature on Tensile Property of Coating FiberglassLow Carbon Steel Surface Pretreated by Silane Coupling Agents for Preparing PE CoatingsDecomposition of Toluene at Optimal TiO2 Thin Film Photocatalytic Process Using the Taguchi MethodPhotocathode Protection Properties of TiO2/V2O5 CoatingEffect of Thicknesses on the Optical and Electrical Properties of Ag Films on PET SubstratesA Novel Acrylic Resin Containing Methoxysilane Moiety and its Application in Antifouling CoatingEffect of TiO2 Nanoparticles on the Hydrophilicity of Sulfonated-PolyethersulfonePreparation and Characterization of Antibacterial Electrospun Polyurethane Fibers Containing TiO2-Ag NanoparticlesEffect of the Amorphous Silica Coating Derived by Sol-Gel Processing on the Oxidation Behavior of NiExperimental Investigation to the Displacement Instability of TGO Near Surface Groove in TBCs due to Thermo-Mechanical CyclesPreparation of Uniform SiO2 Films on Sapphire Dome by r.f. Magnetron Reactive SputteringSuperhydrophobic and Highly Oleophobic Cotton Textile: Achieved by Silica Particles and PFPESynthesis of Eu(TTA)3phen?H2O-PVP Composite Film and Study of their Luminescence PropertiesHigh Temperature Oxidation Behaviors of Ni-Cr Based Thermal Sprayed CoatingsStudy of the Ion Nitrided Layer on Ti-6Al-4V SubstrateStudy of W Metallic Coating Layer on Diamond Surface by Hydrothermal Method Characterization of Nanostructured ZnO Thin Films Deposited by Sol-Gel Spin CoatingThe Biological Behavior of Endothelial Progenitor Cells on Titanium Surface Immobilized by CD34 AntibodyPreparation of WS2/MoS2/C Composite Films and their Tribological PropertiesDesign of Ultrasonic Vibrator for Conformal Coating Spray in LED Packaging Crystal Orientation and Hardness of Au/NiCr/Ta Films on Si-(111) Substrate Prepared by Magnetron SputteringBiomimetic Artificial PVDF Film Reproduce the Superhydrophobic Property of a Lotus LeafOptimization of Hemocompatibility of Silicon Oxynitride FilmsElectrochemical Behavior of Non-Equilibrium Coatings by Electric Arc SprayingCorrosion-Wear Behavior of TiO2 Films in Hanks? SolutionEffects of Non-Continuous TiO2 Buffer Layers on Structural and Electrical Properties of Indium Tin Oxide Thin FilmsPrepared and Microwave-Absorption Properties Investigation of ?-C-Fe-Si/SiC Coated Fe NanocapsulesThermochromic VO2 Thin Film Prepared by Post Annealing Treatment of V2O5 Thin FilmFabrication of Ni-MF/Al2O3 Ceramic CompositesEffects of the Deposition Temperature on the Structure and Solar Control Performance of TiN Coatings Prepared by APCVDSingle Crystalline SnO2:In Films Prepared on Sapphire by MOCVDStructural and Optoelectronic Properties of Single Crystalline SnO2:Ga Films Deposited on a-Al2O3 (0001) by MOCVDCutting Performance of TiAlSiN Coated Cemented Carbide Tool with Post-Deposition Heat TreatmentTransparent Conducting SnO2:Zn Films Prepared on Sapphire by MOCVDFabrication of Self-Healing Ceramic Coating Against Oxidation for Carbon/Carbon Composite Using Polysilazane and FillersEffects of Nano-Al2O3p on Thermal Shock Behaviors of NiCoCrAlY Coatings by Laser CladdingExperimental Study and FEM Analysis on Ceramic Composite CoatingStudy on Fabrication and Properties of Copper-Tin-Oxide Thin FilmsFabrication of Mesoporous N-TiO2 Membrane and its Spectral Characteristics Effect of CeO2 on Microstructure and Properties of WC/Ni60 Coating by Laser CladdingHigh Li+-Ion Storage Capacity and Multi-Electrochromism Behavior of Electrodeposited Molybdenum Doped Vanadium Oxide FilmsEffect of Heat Treatment on Optical Properties of Cold Spray TiO2 Coated Glass Maleic Anhydride Coating for Strontium Aluminate-Based PhosphorsAppearance of the Mechanical Plating Formed by Zn-Al Compounding Flake Powders and its Anticorrosion
In Vitro Study of Microplasma Sprayed Hydroxyapatite Coatings in Simulated Body FluidAnti-Oxidation Behavior of Alumina Coating on Carbon Fibre by Sol-Gel MethodStudy on Barium Strontium Titanate Thin Films Integrated on Si Substrates by Laser Molecular Beam EpitaxyStudy on Lightweight Composited Electromagnetic Shielding Materials of Flakeboard with Electroless CopperThe Effect of Annealing Atmosphere on Electrical Properties of BST Thin Films Prepared on Copper FoilsPreparation of Cu2ZnSnS4 Thin Film by So-Gel Spin-Coated DepositionPreparation of Super-Hydrophobic Polyethersulphone Membrane by Sol-Gel MethodOptical and Electrochromic Properties of Sol-Gel Deposited Mixed MoO3-WO3 Thin FilmsTailoring Photocatalytic Properties of Tungsten Oxide Thin FilmsA DFT Study on the Geometric Structure and Magnetic Properties of (FeAl)n (n=4) ClustersPreparation and Magnetic Properties Studies of Granular FePt Composite Films for High-Density Magnetic RecordingFabrication of (200)-Textured NiO Films on Glass Substrate Using Radio Frequency SputteringInvestigation of Cold Sprayed NiCoCrAlY Bond CoatingPreparation and Electrochromic Properties of Mesoporous WO3 FilmPreparation and Characterization of Lanthanum Self-Assembled Nano-FilmsDeposition of Fluorocarbon Thin Films on Polypropylene Substrate by RF Magnetron SputteringStudy on Technological Process of Cerium-Based Conversion Coating on AluminumSurface Morphology and Structure Study of Titanium Dioxide Thin Films Deposited on PET SubstratesSynthesis of CdS Nanoparticle/Amphiphilic Block Copolymer Composite Films and its Characteristics of Microstructures and Optoelectronic PropertiesCharacterization and Annealing Effects of Titanium Dioxide Films Prepared by a Sol-Gel ProcessAtomic Structure of Hydrous Ruthenium Oxide Coating on Ti and CNT Substrate by Cathodic Deposition MethodCharacterization and Photocatalytic Activity of Composite La-TiO2/ITO Thin-Film Electrodes Induction Heating Deposition of Calcium Phosphate Coating on Carbon/Carbon Composites for Biomedical ApplicationsEBSD Study of Crystallographic Identification on Fe-Al-Si Intermetallic Phases in Aluminide Coatings on Mild SteelsEffect of Annealing on Magnetic Properties and Domain Structures of FePt Thin Films by Rapid Thermal Annealing TechniqueInfluence of Substrate Temperature on the Characteristics of LaB6 FilmsEffects of Annealing on the Optical and Electronic Properties of Poly (vinylidene fluoride-trifluoroethylene) Copolymer Thin FilmsInfluences on Optoelectronic Properties of Damp Heat Stability of AZO and GZO for Thin Film Solar CellsGlass Fibers Covered with TiO2 Thin Films by Sol-Gel Method as a Photocatalyst Reactor to Degradation TolueneApplication of V2O5 in Thin Film Microbatteries Prepared by RF Magnetron SputteringCoating Time Effect on Surface Structures of Silica-Encapsulated Gold Nanoparticles Photoaided Cathodic Protection of TiO2 Nanoparticle Coating on 304 Stainless Steel SubstrateThe Photoelectrochemical Characteration of Porous Titania Dioxide Thin Films Prepared by PEG-Assisted Sol-Gel MethodPreparation and Characterization of CePO4 Coated ZrO2 Composite Powders by Hydrothemal MethodEffect of Gelatin on the Performance of Cerium-Based Conversion CoatingsThe Corrosion Mechanism of Cu-Containing Weathering Steel in a Cyclic Dry-Wet ConditionStudy on Resistance to Sulphate Attack of Polymer Modified Sulphoaluminate CementPreparation and Properties of Composite Antibacterial Agent Containing Copper and Zinc IonsVisible Light Activated Photocatalytic Degradation Effect of V-TiO2 on Azo Dye Wastewater Anti-Biofouling Property of a Novel Cross-Linkable Copolymer Grafted a Short Semifluorinated Aromatic Side ChainThe Preliminary Study on Antifouling Mechanism of Shark SkinStudy of the Inhibition Mechanism of Imidazoline Derivative Inhibitor on CO2 Corrosion for Q235 SteelEffect of Alternating Pressure of Seawater on Protective Properties of Organic Coating on Steel SubstratePreparation and Characterization of Cu-Inorganic Antibacterial Material Containing Rare EarthsPitting Susceptibility and Semiconducting Properties of Passive Films of 18Cr-18Mn-2Mo-0.9N High Nitrogen Austenitic Stainless SteelFabrication and Corrosion Behavior of Electroless Ni-W-P Coating on Magnesium AlloyThe Research on Endothelialization of the Ti-O Films Surface Modified by Plasma Implantation and Immobilized with Ln and FnInfluencing Factors of 1Cr13 SSCC for Oil & Gas WellheadAdhesion and Corrosion Resistance Properties of TiC/Ti(CN)/TiN Multilayer CVD Coatings on 42CrMo SteelsInfluences of Aging Precipitation on Corrosion Resistance of 18Cr-18Mn-2Mo-0.77N HNSCorrosion Behavior of Al-Si-Cr-Cu Bearing Low Carbon Steel in A Cyclic Dry/Wet Laboratory TestThe Improvement of Durability of Marine Wood with Polymer and its MechanismInvestigation on Inhibitor Electromigration Anticorrosion Technology for Reinforced Concrete StructureStudies on Crack Propagation of Carbon Fiber Reinforced Epoxy Resin CompositeAcridine as Effective Corrosion Inhibitor for Hot Dipped Coatings on Steels in Diluted HCl SolutionInfluence of In Situ MgO Coating on Corrosion Resistance of Pure Magnesium in Normal SalineEffect of Boron on Magnetic Properties and Corrosion Resistance of High Energy MagnetsLow Driving Voltage Aluminum Alloy Anode for Cathodic Protection of High Strength SteelHydrogen Permeation Characterization of Hot-Dip Galvanized Steel in Simulated Marine Atmospheric EnvironmentSynthesis and Characterization of Polyorganosiloxane Modified Waterborne PolyurethaneSynthesis and Gas Sensing Properties of Urchin-Like CuO Self-Assembled by Nanorods through a Poly(ethylene glycol)-Assisted Hydrothermal ProcessCorrosion Inhibition of Dissymmetric Bis-Quaternary Ammonium with Imidazoline Ring on Q235 Steel in 1.0 mol?L-1 Hydrochloric Acid SolutionWater-Based Polyaniline/Montmorillonite/Epoxy Composite Coatings for the Corrosion Protection of Mild SteelCorrosion Protection of a SiCp/ZL101 Composites by Using Plasma Electrolytic Oxidation MethodCorrosion Resistance of Rare Earth Modified Chromizing Coating on P110 Oil Casing Tube Steel by Pack CementationNatural Antifouling Materials from Marine Plants Ulva pertusaEffect of Catalytic Crystalline Waterproof Coatings on Steel Reinforcement Corrosion of ConcreteErosion Resistance of TiC/Fe Composite at High TemperaturesAnalytical Characterization and Corrosion Behavior of Non-Functional Bis-Silane Pre-Treated Carbon Steel SubstratesFinite Element Simulation of Lamb Wave with Piezoelectric Transducers for Composite Plate Damage DetectionElectrochemical Corrosion Behavior of Cu-15Ni-8Sn Alloy in Marine Microbial MediumThe Doping of Ag+ Enhanced the Antibiocorrosive Effect of Titania in Seawater under Visible LightStudy on Corrosion Behaviors of Copper Manganese Aluminum Alloy in Microbiologically Influenced CorrosionMicrobially Influenced Corrosion of Copper by Marine Bacterium Vibrio natriegensNew Application of the ?Underwater Super-Hydrophobic? Surface in the Corrosion ProtectionStudy onCorrosion Behaviour of AISI 316L Stainless Steel Treated with Air Cold PlasmaInhibition Microbial Adherence of Superhydrophobic Surface on Aluminum in SeawaterNumerical Study on Rapid Solidification of a Plasma-Sprayed Cast Iron Splat on a High-Temperature SubstrateStructural Design and Performance Testing of Flexible Fabric Keyboard SwitchNotched Tensile Fracture of Ti-6Al-6V-2Sn Welds at Elevated TemperatureCalculation of Flexural Capacity of Steel Reinforced Concrete Beams Strengthened with FRPResearch on Chaotic Behavior of Concrete under External Load Based on Discontinuous Medium Mechanical ModelCoupled Numerical Analysis of the Anti-Crack Mechanism for Open-Graded Large Stone Asphalt MixesFinite Element Method Simulation of 35# Steel Cathodic Protection Models in the SeawaterThe Effect of Creep on Morphology Change of Surface Groove on Fecralloy in TBCs during Thermal Oxidation Cycles Numerical Investigation on the Effect of Copper Filler Thickness on the Brazed Residual StressMathematical Modeling of the Fracture Toughness of Phenol Formaldehyde Composites Reinforced with E-SpheresNumerical Simulation of Thermal Cycle of In-Service Welding on X70 Steel Gas Pipeline A Study on Process-Induced Warpage of Curing Mold of Composite StructuresCalculation and Analysis of Valence Electron Structures of the Precipitated Phases in Al-Cu AlloyIdentification of Delamination in Anisotropic Laminated PlateAtomic Simulation of the Bending Deformation of a Single-Crystal Simply Supported Nano-BeamThree-Dimensional Numerical Simulation of Residual Stresses by Shot-PeeningQuantum Chemical Calculation of Maleic Anhydride Ring-Opening ReactionTheory Study of the Geometrical Isomerism Influence on Hole-Transport Material?s Residual Potential of Organic PhotoconductiveFirst-Principles Calculations on the Geometry and Electronic Structure of Rutile TiO2 (110) SurfaceDynamic Models for Magnetorheological Dampers and its Feedback Linearization Simulation on Uniaxial-Tension Behavior of NiTi Shape Memory Alloy FilmsExperiment Research on Purifying Metallurgical Grade Silicon and Crystal Growth in Directional SolidificationPolyethylene Rubber Composite Target Resistance to Jet PenetrationA Study on the Advanced Surface Characteristic of Yttria (Y2O3) Ceramic by Using Optimal Design of ProcessThe Gradual Damage Analysis for the Two-Dimension Unit Cell of the CompositeProcess Analysis and Numerical Simulation of Equal Channel Angular Pressing and Torsion (ECAPT)Studies on Magnetic Shielding Effectiveness by Finite Element MethodExperimental Researches on the Mechanical Properties of Three Dimensional Multidirectional Braided CompositesBuckling Response of Metallic Foam Composite Sandwich Panels Subjected to Edgewise CompressionElectronic Structure and Optical Properties of Non-Metals (N, F, P, Cl, S)-Doped Cubic NaTaO3 by Density Functional TheoryFirst-Principles Study of the Electronic Structure and Spontaneous Polarization of PbZr0.4Ti0.6O3First-Principles Study on the Conductive Properties of P-Doped ZnOAtomic and Electronic Structure of LaAlO3 and LaAlO3:Mg from First-Principles CalculationsKinetics of Sol-Gel Transformation for the Preparation of TiO2 Ultrafiltration MembraneExperimental and Numerical Study of the Influence of a Low-Frequency Electromagnetic Field on the As-Cast Structure of Horizontal Direct Chill Casting Aluminum Alloy Slab3D Fem Study of Fluid Flow in the Mould for Billet Continuous CastingModeling and Testing for Small-Scale Time Delay Device Based on Magnetorheological FluidEffects of Materials on Formation of Double-Layered Liners Shaped ChargesSynthesis and Formation Mechanism of Hollow Carbon Spheres Containing Fe3N NanocrystalsNumerical Simulation on Characteristics of Dense-Phase Pneumatic Conveying in Horizontal PipeMolecular Simulation of the Interfacial Properties of an Epoxy Composite Reinforced Using a Carbon Nanotube/Carbon Fiber HybridA Study on the Crack-Controlled Layer of UHTCC in Functionally-Graded Composite BeamsNumerical Study on the Mechanical Behavior of Aluminum Foam Material Using CT Image Effects of Magnetic Field Gradient on Particle Distributions of Suspension Comprised of both Magnetic and Nonmagnetic Particles Using Two-Dimensional Monte Carlo SimulationsModeling of Dynamic Characteristics of Ionic Polymer-Metal Composite Beam near Resonant Frequencies Recent Development of Molecular Simulation Based on GPU in Material ScienceNonlinear Dynamic FE Simulation of Smart Piezolaminated Structures Based on First- and Third-Order Transverse Shear Deformation TheoryModeling and Simulations of Pd/n-ZnO Schottky Diode and its Comparison with MeasurementsModeling and Optimization of Nanomechanics of Diamond-Like Carbon by MPCVD Using Response Surface MethodologyStudy on Nanomechanical Properties of Dragonfly WingNumerical Study on Damage Response of Ship Composite Armor Structures to Contact Underwater ExplosionElectronic Structure of Bimetallic FemAln (m+n=6) ClustersFirst-Principles Calculations of Structural and Elastic Properties of Hexagonal Boron NitrideIn Air Synthesis of Bi2S3 and PbS Microcrystals by Thermolysis of Single-Source PrecursorsMicromechanical Modeling of the Effect of Progressive Damage on the Tensile Behavior in Fiber-Reinforced Polymer CompositesMagnetic Properties of MWNTs-Fe3Al CompositeStudies on Synthesis, Morphology and Theoretical Analysis of Schiff Base Derived From p-Aminobenzoic Acid and p-Hydroxybenzaldehyde by Solvent-Free Reaction Using Jet Milling Preparation and Characterization of Ion Exchange Resin Mixed Polyethersulfone Hybrid MembranesConvective Heat Transfer Steady Thermal Stress in a Ceramic/FGM/Metal Composite EFBC Plate with Temperature-Dependent Material PropertiesPerformance Deterioration Behavior of Existing Reinforced Concrete BridgesLow-Temperature Preparation of Biomorphic TiC/C Ceramic in Molten Salt MediaSynthesis of Al8B4C7 from Al/ Na2B4O7?10H2O/C Mixed PowdersInfrared Heating Applied in Titanium BrazingLight Induced Ferroelectric Domain Nucleation in LiNbO3 Crystal Experimental Analysis and Performance Evaluation of Magnetorheological Damper under High Impact LoadFracture Test and Numerical Analysis of Structural Steel Notched Plates Based on Generalized Strength ModelResearch on Surface Color, Properties of Thermo-Treated Reconstituted Bamboo Lumber after Artificial Weathering TestFlexural Strength of Phenol Formaldehyde Composites Post-Cured in Microwaves: Preliminary ResultsEffect of Mn and Cu on Spheroidized Process of Mg-Zn-Y-Based Icosahedral Quasicrystal PhaseMagnetic Properties and the Giant Magneto-Impedance in Joule-Heated Glass-Covered Co-Based MicrowireDesign and Analysis of a Ring Type Traveling Wave Ultrasonic Motor Using Cantilever Type Composite TransducerMicrostructure and Tensile Property of Zn-Al Alloy Reinforced with Titanium Produced by ElectrolysisThe Microstructure of The Semi-Solid ZL201 Alloy Obtained by Near-Liquidus Electromagnetic Casting and the Fine MechanismSemi-Solid Thixoforming Simulation of ZL201 Alloy Parts via AnyCastingExperimental and Thermal Analysis of Sheet Molding Compound with Magnesium Oxychloride Crystal Salt Using as Flame RetardantRelease of Aspirin from Biodegradable Polyesterurethane NetworksSynthesis and Characterization of Thermotropic Liquid Crystalline Polyesters/Glass Fiber by In Situ ProcessCharacterization of Hot Deformation of Nb-V-Ti Microalloyed Steel Using Processing MapNew Magnesium Alloys for Potential Application of Implantation BiomaterialFar-Field Solution of Circular Lining and Linear Crack by SH-WavePVDF Films with Superhydrophobic Surface Fabricated by Plasma-Enhanced Chemical Vapor DepositionCoupled Deflection Analysis of SMA Fiber Hybrid Composite Active BladeLaser Surface Alloying of NiCr-Cr3C2 and C-B-W-Cr Powders on Nodular Cast Iron RollsMicrostructures and Wear-Resistant Properties of In Situ WCp/W Wire Hybrid Reinforced Iron Matrix Composites via Electromagnetic FieldSynthesis and Stability of Cubic Silicon NitrideInstability of Functionally Graded Panels with Structural Damping under Supersomic Flow Synthesis, Structure and Electrochemical Behavior of a Supramolecular Compound Synthesis and Electrochemical Behavior of Two Microporous PolyoxomolybdatesSolid Reaction and Microstructure of Interface of 3D Meshy SiCn/Cu Composite Fracture Behavior of Particle Reinforced Metal Matrix CompositesModeration of Entrance Pressure Drop and Extrudate Swelling of Wood Fiber/Polypropylene Composites Melt in Rotating-Die Extrusion ProcessDiethylenetriamine-Assisted Hydrothermal Route to Synthesize Cuboidal Structure of PbSe CrystalMicrostructure and Mechanical Property of 2.5D C/SiCN CompositeInfluences of Fe2O3 Doping on the Crystallization of SiO2-Al2O3-MgO-K2O-ZrO2-F Glass-CeramicsEffect of Cold Rolling Deformation on Aging Precipitation of Cu-Cr-Sn-Zn AlloyA Green Approach to Preparing Nanosized Hollow Silica Microspheres with Waste PolystyreneInvestigation about Corrosion Properties of AZ31 Magnesium Alloy Coupled with Nitrided 40Cr SteelResolution Wavelet and Online Damage Detection for Composite Material Structure Dynamic Response SignalEffects of Ultrasonic Vibration Treatment on Microstructure of Heat-Resistant Al-Si AlloyPreparation and Property of Wood Polymer Composite with a Two-Step MethodPreparation, Cytotoxicity and Degradability of Chitosan-Based Thermosensitive Hydrogels as Drug Delivery SystemPreparation and Characterization of Ga2xIn2(1-x)O3 Films Deposited on a-Al2O3 (0001) by MOCVDStructural and Optical Properties of SnO2 Films Grown on 6H-SiC by MOCVDHeterogeneous Preparation of Polyaniline-Cellulose Conductive Composites with Cellulose Pretreated by Ultrasonic and its Electrical PropertiesSynthesis and Characterization of Polyaniline/Montmorillonite/La3+ NanocompositesPolyaniline/Graphitenanosheets/Eu3+Nanocomposite: Synthesis and CharacterizationSynthesis and Characterizations of Cubic Assembly Composed of Platinum NanoparticlesMechanism Researches on the Mutual Adaptability and the Dispersivity and Stability of Nanoparticle-Modified Asphalt CompositeNotched Strength Prediction and Verification of APC-2 Composite Laminates at Elevated TemperatureCoprecipitation Synthesis and Negative Thermal Expansion of R2Mo3O12 (R = Y, Yb)Characterization of Wear Performance of Micro-Plasma Surface Hardened LayerSynthesis and Characterization of Highly Branched Poly(urethane-imide)sElectrical Behavior of SiCp Reinforced Copper Matrix Composites by Hot PressingMorphology of Electrospun Natural Rubber with Acrylonitrile-Butadiene-StyreneResearch on Heat Treatment Process of Foam Glass Prepared by Titania-Bearing Blast Furnace SlagStructure and Properties of Epoxy Resin/Poly (aryl ether ketone) Blends Cured with 4,4'-Diaminodiphenylmethane Bending Characteristics of Electrical Responsive Poly(vinyl alcohol)/Poly(acrylic acid) Semi-Interpenetrating Polymer Network Hydrogel under DC Electric Field Mechanical Properties and Applications of CFRP in Retrofitting and Repairing Reinforced Concrete Short ColumnsInfluence of Doped Mn, Cu, Ni and Fe on Electrical Properties of SrTiO3 CeramicsPreparation and Properties Analysis of Polyaniline/Nano-SrFe12O19 Composites with Different MorphologiesMicrostructure and Properties of Ti-Al Based Composite Coating Prepared by Electrospark Deposition ProcessInfluence of DC-Joule Heat on Giant Magneto-Impedance of Co-Based Melt Extraction WiresStructure and Properties of Hydrogen-Charged Electrochromic Nb2O5 CeramicsSynthesis and Property of Y-Shaped Thermoresponsive Block CopolymersEffect of Pore-Forming Agents on Structure and Properties of PVDF/PVC Blend MembranesA Novel Bioadhesive Protein of Silk Filaments Spun Underwater by Caddisfly LarvaeElectrodeposition of Silicon in Organic Solvent Containing Silicon ChlorideThermoelectric Properties of Y-Doped Mg2Si Prepared by Field-Activated and Pressure-Assisted Reactive SinteringPreparation of Amorphous Calcium Phosphate/Triclcium Silicate Composite PowdersPreparation and Structural Phase Transitions of Silver PalmitatePermanent Mold Suction Casting for TiAl Based AlloysMicrostructure Evolution of Directionally Solidified Al-25at.%Ni Peritectic AlloyThe Preparation of Ti-6Al-4V Alloy Rod and Blade by Metal Mold Suction Casting and the Effects of Hydrogen on ThemThe Research of SOL Treated Cantilever Beam Based on Analytical Methods and ANSYSResearch on the Anti-Static and Anti-Radiation Properties of Fabrics Containing Stainless Steel Microfilament
In Situ Growth of Carbon Nanotubes in Hydroxyapatite Matrix by Chemical Vapor DepositionMorphological Characterization of Chitosan in the Hydroxyapatite/Chitosan NanocompositesResearch on the 1.06 ?m Reflectivity of Subwavelength Surface-Relief Structure via Finite Different Time Domain MethodPhosphotungstic Acid/Semi-Coke Catalysts for Oxidative Desulfurization of Diesel FuelStudy on Microstructure and Properties of Aged Cu-Ti-Zr-RE AlloyFabrication and Evaluation of Electrolyte-Supported Hollow Fiber Solid Oxide Fuel CellsHydrogen Permeation Performance and Chemical Stability of Ni-La1.95Ca0.05Ce2O7-d in an H2S-Containing AtmosphereThe Study of Ultrasonic Dynamic Elastic Modulus of TiNiFe Shape Memory Alloy in Heating ProcessSwitching Porphyrin Fluorescence on and off through RedoxStructure and Photoluminescence Investigations of Self-Organized InAs/GaAs Quantum WiresCrystal Structure and Optical Spectra of Er:NaLaxYb9-x(SiO4)6O2 (x=0,3,5,7,9) Crystals Prepared through a Hydrothermal RoutineA New Phosphate-Bonded Investment Material for Rapid Ceramic Molding of Medium-Size CastingsResearch on Purification of Attapulgite Clay and Adsorption Characteristics for Metal CationsPreparation and Properties of Novel Bonded Perovskite Manganite OxidesHigh-Frequency Vibration Response of Metal Honeycomb Sandwich StructureAccurate Displacement Measurement for Landslide Prediction by Sampling Moir? MethodStudy on Dynamic Friction Process of Sweat Self-Lubricating Composite at Elevated Temperature Based on CA MethodInfluences of Pretreatment Solution Concentrations on Copper-Doped SiC Particles Made through Electroless Plating TechniqueCrystal Orientation and Surface Morphology of Sono-Electroplated Zinc Film from Alkali Zincate BathManufacturing of Heavy Plates with Excellent Mechanical Properties by a 40t ESR Furnace for Slab ProductsStudy on the Toughness Performance of Polypropylene Fiber and SBR Polymer Latex Modified Cement MortarFormation Enthalpies of 18 Carat Au?Cu?Ni-Zn-RE Alloys Calculated With Chou? ModelsInvestigation on Interlaminar Mechanical Properties of Hybrid CFRP/VGCF LaminatesPreparation and Characterization of Nature Rubber/Attapulgite CompositesStudies on Preparation and Property of 2.5D SiO2f/ SiO2 CompositesExperiment Study on the Chloride Penetration of Steel Fibre Reinforced ConcreteMicrostructure and High Temperature Oxidation of the Hot-Dipping Al-Si Coating on Low Carbon Steel in Ethanol, Water Vapor and Air at 700?CInterlaminar Shear Strength of Glass Fiber Reinforced Dially Phthalate Laminates Enhanced with NanoclaysExperimental Study for Performance Influence of Various pH Values on Pavement Straw Composite FibersHydrothermal Synthesis and Electrochemical Study of VOx/CNTs Composites Microstructure Evolution and Mechanical Properties of 7A09 Aluminum Alloy during Rapid SolidificationsPreparation of Semi-Solid Billet with Less Liquid Content of 7A09 Aluminum Alloy by Partial-Melting MethodStudy on Antibacterial Mechanism of Ag-Inorganic Antibacterial Material Containing LanthanumInterface Strength and Structure of Explosive Welding Sainless Steel-Aluminum CladPreparation of High-Purity YAG Powders by Gel Solid-State ReactionLow Temperature Synthesis of Magnesium Aluminate Spinel from AlOOH and MgO PowderThermal Energy Discharge Characteristics of a PCM Heat Exchanger with Calcium Chloride HexahydrateSedimentation Equilibrium of Ultrafine A1(OH)3 Particles in Aqueous SolutionFabrication and Properties of Ce3+ and Tb3+ Co-Doped Ca2SrAl2O6 PhosphorPreparation of Nitrogen Doped ZnO Dilute Ferromagnetic Semiconductor by Magnetron SputteringOxygen Reduction Electrocatalysts Based on Two-Dimensional Iron Polyphthalocyanine Low Velocity Impact Damage Evaluation of 2D C/SiC Composite MaterialFabrication of Polystyrene-Encapsulated Nanodiamond via In Situ Latex Polymerization and their Wettability EvaluationInvestigation on Microwave Absorbing Properties of Double-Layer Cementitious CompositesPreparation and Properties of Nano-Inorganic Mineral Material as Lubricating Oil AdditiveGrowth of Carbon Nanocoils Using Chemical Vapor DepositionFlexural Testing of Fiber Reinforced Polymer-Concrete Composite Bridge SuperstructureDamping Performance of Cocured Composite I-Shaped Beams with Embedded Viscoelastic Layers Anti-Wear and Reduce-Friction Ability of ZrO2/SiO2 Self-Lubricating CompositesDeveloping a New Method for the Formation of NiO Hollow Microspheres Using Yeasts as Bio-TemplatesStudy on the Wear Resistance of ZnAl27 Composite Reinforced by SiC ParticlesEffects of Chlorine Ion on the Photocatalytic Activity of Cuprous Oxide Powders Prepared by Hydrothermal MethodPreparation of Low Chlorine Shellac from Seedlac by Dechlorination Process Using Pd/Fe Binary Metal as CatalystSynthesis of NH2-Functionalized Nano-Fe3O4 Magnetic Polymer Adsorbent and its Application for the Removal of Cr (VI) from Industrial WastewaterImprovement on the Efficiency of Drawing during the Production of Microfibrillar CompositesA Study of Surface Treatment on LY12 Aluminum Alloy by ?-APSThermal Parameters of Sweat Lubricating Composite and its Effect on High Temperature Rolling BearingResearch on the Growth Mechanism of Alumina Ceramics with Columnar Grain Research on Zinc-Silica Composite PlatingExperimental Research on the Preparation of Porous Activated Carbon from Orange WastesEffects of Different Cooling Rate and Modifiers on the Microstructures of 4Y32 Aluminum AlloyStudy on Seawater Corrosion of Fe-Al Intermetallic CompoundThe Uniform Elongation of Web and Flange of H-BeamDamage Evolution of Delayed Fracture in Woven GFRP under Hot Water EnvironmentOriented Growth of cBN Crystals Along [100] Direction in Hydrothermal ConditionsInfluence of Dye-Polyether Derivatives Architecture on Parent C. I. Disperse Yellow 64 DispersionPreparation of Inorganic/Organic Hybrid Membrane Adsorbents for Gasoline Desulfurization: Control of the Membrane StructureDry Sliding Wear Behavior of Fe3Al Intermetallics Prepared by Mechanical Alloying and Hot PressingCarbonate Steelmaking Slag to Manufacture Building MaterialsThrough-Thickness Texture Variation in Non-Oriented Electrical Steel Sheet Produced by Asymmetric RollingPlastic Deformation and Damage Behavior of AL6XN Super-Austenitic Stainless SteelsThe Concentration Fluctuation near Critical Temperature of Liquid Bi33.3Ga66.7 AlloyStrength Prediction of Connecting Frame in Aircraft Composite CabinMechanism of Steel Corrosion Inhibition Using Mannich BasesWet Surface Modification of Light Calcium Carbonate Powder by Aluminate Coupling AgentProcess Optimization of Preparation and Performance Characterization of Oily Sludge-Based Adsorbent Material by PyrolysisSuperdeep Penetration - Novel Method of Nanoreinforced Composites Producing Based on Metallic, Ceramic and Polymer MatrixesNew Methods of Preparing Multi-Functional Nanocomposite CoatingsSic Based Ceramic Foams Reinforced by In Situ Mullite WhiskerCorrosion Properties of Magnetron Sputtered Al-Mg Alloy Coatings on High-Speed Electro-Galvanizing SteelFabrication of (TiB2, TiCx)/B4C Composites via Ti3Al IMC Added in B4C CeramicsThickness Measurement of Composite Material Using Eddy Current TestingPreparation of pH Sensitive Polyacrylic Acid(PAAc) Macroporous Hydrogels in Aqueous NaCl Solutions and their Characterization Effect of Small Addition of Niobium on the Mechanical Properties of FGBA/ BG Duplex Phase Air Cooling Bainitic SteelMicrostructure and Electrical Properties of La2O3-Doped ZnO-Bi2O3 Based Varistor CeramicsMechanical Properties and Ablation Behavior of Machinable ZrB2-SiC-BN CeramicsMicrostructural Evolution and Mechanical Properties of Powder Hot Extruded Al-Zn-Mg-Cu Alloy Phase Evolution and Sintering Characteristics of Mullite-Based Ceramics Prepared from Coal Fly Ash, Calcined Bauxite and Ball Clay
In Situ Observation of the Growing Surface Morphology of KDP Crystals by MicroscopeImprovement Properties of Recycled Polypropylene by Reinforcement of Coir FiberDetection and Characterization of Fatigue Induced Damage Using Electromechanical Impedance TechniqueSynthesis and Characterization of Platinum-Containing Ordered Mesoporous Carbon with High Specific Surface AreaFunctional Silica Aerogels with High Specific Surface Area: Influence of Preparation Conditions on Structure PropertiesSynthesis and Characterization of Water-Soluble Cu2+-Doped ZnSe Quantum DotsFire-Damage or Freeze-Thaw of Strengthening Concrete Using Ultra High Performance ConcretePyrolysis Kinetic of Basic Zinc Carbonate from Spent Catalyst and Preparation of Active ZnO by Microwave HeatingPreparation and Biological Activity of Chitosan Fibers Reinforced PLLA/HA-CaSiO3 CompositesSynthesis and the Characterizations of Structure and Function of Gallic Acid Microcrystalline Cellulose EsterElectrical Response and Mechanical Behavior of Plasticized PVC Actuators Effect of Disbond Propagation on the Reflected Spectra of CFBG Sensors Embedded within the Bondline of Composite Bonded Joints Influence of Zinc-Zirconium Substitution on Magnetic Properties of Ba(ZnZr)xFe12-2xO19 Hexaferrite Prepared by the Molten Salt MethodN-(n-butyl)-3-aminopropyltrimethoxysilane-Functional Modified Pyrophyllite: Preparation, Characterisation and Pb(II) Ion Adsorption PropertyAlkali-Activation Reactivity and Al Environment of Chemosynthetic Al2O3?2SiO2 PowdersSynthesis, Characterization and Properties of a Novel Soluble Polyester Based on FluorenePerformance and Tribology of Polymer Matrix Friction Material Reinforced with FibersStudy of the Morphology and Antibacterial Properties of Nano Silver Films Prepared on Regenerated Cellulose SubstrateSynthesis, Morphology and Photophysical Properties of Rod-Coil CopolymersInvestigation on the Tap-Hole Clay under Thermal ProcessingPreparation of Core/Shell Composite Latex Particles and Toughening Modification for Polyamide 6TEM Microstructural Investigation of 0.63C-12.7Cr Martensitic Stainless Steel during Various Tempering TreatmentsDependence of Aspect Ratio on1-3 Polymer/Cement Based Piezoelectric Composite PropertiesSynthesis, Characterization and Photocatalytic Performance of Novel Composite Ag/ BiVO4 PhotocatalystsA Study on the Coating of Acupuncture Needle with Bioceramics to Improve Insulation PerformanceCatalyst Assisted Synthesis of Carbon Nanotubes Using the V-Shaped Pyrolysis Flame MethodPhotocatalytic Reduction of Methyl Orange Using Titania Photocatalyst Codoped with Nitrogen and Gadolinium under Visible Light IlluminationPreparation of Cuprous Oxide from Industrial Leaching Liquid Using the Microwave Thermo-Ethanol MethodEpoxy Curing System with Liquid 1,3-Bis(3-aminopropyl) tetramethyl Disiloxane as Curing Agent for Advanced Electronic PackageOptimization of Annealing Treatment Parameters in a Twin Roll Cast and Warm Rolled Mg-4.5Al-1.0Zn AlloyHigh Temperature Thermoelectric Properties of Oxide Ca2Co2O5Investigation on the Sound Absorption Properties of MPA/MREffects of Aluminizing on the High Temperature Oxidation Behavior of High Silicon Cast IronA Facile Method of Surface Modification Based on the Adhesive Behavior of Poly(dopamine) on Copper Fabrication and Electric Properties of SrTiO3-d/Nb-SrTiO3 HeterjunctionEffect of Fluctuation in Fiber Orientation on the Young?s Modulus of Green CompositesMultiscale Bone Remodeling Prediction for Fully Porous-Coated (FPC) Dental Implant Supported ProsthesisThe Effect of Excess Silane-69 Used for Surface Modification on Cure Characteristic and Mechanical Properties of Precipitated Silica Filled Natural Rubber (PSi/NR)Influence of Curing Process on the Performance of Epoxy ThermosetsResearch on the Antifouling Mechanisms of Copper and its AlloysThe Effect of Second Filler on Cure Characteristic and Mechanical Properties of Si-69 Treated Precipitate Silica/NR CompositeStudy of AMP-Activated Protein Kinase Agonists by Structure-Based Drug DesigningBehavior of Heavy Plastic Deformation of Cu-15Cr-0.1Zr In Situ CompositeEffect of Electrode Shape on Power and Internal Resistance in Benthic Microbial Fuel Cell Material on Marine SedimentTribological Characteristics of Surface Treatment for Piston PinSynthesis of Crosslinkable Core-Shell Emulsion and Rheology of the Core-Shell/Amine Crosslinking ProcessElectronic Structure Study of Metal Complex {1,1?-[ o-Phenylenebis(nitrilomethylidyne)]di-2-naphtholato}Copper(II) A Structural Improvement of Breaker Plates and Analysis of their Dynamic Properties in Polymer Tube ExtrudersFabrication and Residual Stresses of Aluminum Nitride Ceramics Sintered at High-PressureReactive Adsorption of Sulfur Compounds from FCC Gasoline on NiO/?-Al2O3Structural Performance of Pultruded Composites under Elevated TemperaturesA New Process and Structure of Al2O3/LaPO4 CompositesInfluence of Calcining Temperature on the Microstructure of LaPO4 PowdersMolten Salt Synthesis of LaPO4:Eu3+Influence of Si Content on the Oxide Scale Formation of Ni-Based AlloyAnnealing Temperature Effect on Superelastic and Cyclic Response of NiTi SMA 3D Electromagnetic Simulation Study for the Distribution of Electromagnetic Field of Microwave Sintering CavityMicrobiologically Influenced Corrosion of Fe3Al/ZrO2 Composites in Marine Environment Study on the Formation and Variation of Monodisperse Nano-Sized Polystyrene Beads by Suspension Polymerization with Hydrophilic Polymer as a StabilizerShape Memory Behavior of Ti-Rich Ti-Ni-Cu Melt-Spun RibbonsElectroresponsive Property of Novel Poly(acrylate- acryloyloxyethyl trimethyl ammonium chloride)/Clay Nanocomposite HydrogelsPositive Temperature Coefficient Behavior of HDPE/EVA Blends Filled with Carbon BlackPartical Size and Morphology of Zeolite ? Influenced by Various Conditions in the Hydrothermal SynthesisPreparation and Properties of TiN Thin Films by D.C. Reactive Magnetron SputteringEvaluation of the Degree of Crystallization in Glass-Ceramics by Dielectric Constant MeasurementsLarge-Scale Synthesis of ZnO Nanorods by Different Surfactant-Assisted and Low-Temperature Process