Selected, peer reviewed papers from the 3rd International Conference on Chemical Engineering and Advanced Materials (CEAM 2013), July 6-7, 2013, Guangzhou, China
Buch, Englisch, 1704 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 3200 g
ISBN: 978-3-03785-814-1
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preface and Conference Organization
Chapter 1: Iron and Steel
The [Ti] Content Control of the Tire Cord Steel 82A
Study on Anti-Stress Relaxation Behavior of Non-Quenched Steel
Effective Controlled Method Adding Carbon into Molten Steel to Produce 55Q Steel
Numerical Simulations of Pressurized Elbow under Reversed In-Plane Bending
Corrosion Inhibition of Low Carbon Steel by Pluchea Indica Less. in 3.5% NaCL Solution
Electrochemical Performance of Q235 Steel in Different Temperature and Different Waste Water
Laboratory Investigation of the High Phosphorus Hot Metal Dephosphorization Pretreatment Using Multi Phase Flux
Study on Corrosion Inhibition of Glutaraldehyde for 304 Stainless Steel in Simulated Cooling Water Containing Sulfate-Reducing Bacteria
Chapter 2: Non-Ferrous Metal Materials
Research on the Si-Ti High Temperature Oxidation-Resistant Coatings for Tantalum Alloys
Thermal Non-Destructive Testing for the Titanium Implants
Investigation on Efficient Vanadium Extraction from Vanadium-Bearing Molten Iron
Effects of P Addition on the Oxidation and Corrosion Behavior of Sn-9Zn-1Bi Solder Alloy
Effects of Grain Refiner and Cooling Rate on Solidification Structure of H62 Brass
Low Cycle Fatigue Study of 63Sn-37Pb Solder under Torsional Cyclic Loading
Effects of Trace ZrC on the Microstructure and Properties of Molybdenum Alloy
Simulation of the Elastic Modulus of Mo Alloys at Both Room and High Temperatures
Microstructure and Mechanical Properties of Ti-Al-Mo-V-Ta Alloys
Influence of Additives on Preparation of Aluminum Foam
Corrosion Characteristics of Friction Stir Welded AZ31 Magnesium Alloy
Interaction between Sodium Molybdate and FSWed Weld of 5083 Effected by Temperature
Separation and Dissolution of Phases in 40CrNiAl Alloy during Heat-Hardening
Design and Synthesis of (E)-2-Hydroxy-4-Alkoxyl Salicylaldoxime Copper Extractant
Design and Synthesis of (E)-2-Hydroxy-5-Alkoxyl Salicylaldoxime Copper Extractant
Extraction of Vanadium from Chloride Solutions Using Di (2-Ethylhexyl) Phosphate
Chapter 3: Composites and Building Materials
Thermal Stability and Crystallization Behavior of PP/Organoclay Phase Change Composites
Experiment on Cement Proportion and Mixing Technology for Expansive Soil Modification
Heat Release Performance of the Flame Retardant Rigid Polyurethane Insulation Foam
Fabrication and Characterization of Graphene/Polyimide Nanocomposites
Estimation of Fracture Toughness of Fiber/Matrix Interface
Study on Properties of Wollastonite Micro Fiber Reinforced Mortar
Production of Self-Compacting Concrete Using Rock Breaking Waste Residues
Synthesis of Compound Foaming Agent of Lightweight Foamed Concrete
Synthesis of Polyacrylate Dispersants and the Influence of these Dispersants on Rheological Properties of Unsaturated Polyester Resin (UPR)/Aluminum Hydroxide (ATH) Composites
Study on Preparation of Nanocarbon Black-Polypropylene Electric Conduction Composite Materials
The Thermal Shock Resistance of Mg-PSZ/LaPO4 Ceramics
Fire Risk Assessment of Fire Retardant Polyurethane Thermal Insulation Materials for Exterior Walls of Buildings Based on Analytical Hierarchy Process
Finite Element Analysis of Woven Fabric Laminates Structural Strength
The Effect of Curing Conditions on Mechanical Properties and Durability of Concrete
Effects of Seawater Immersion on Mechanical Properties of CFRP Composites
Finite Element Analysis for the Effect of Weak Interface on the Ratcheting of Particle Reinforced Composites
Preparation of Carbon Nanotubes Doped TiO2/Glass Fiber Reinforced Plastics Hybrid Materials
The Use of Geopolymers in Rehabilitation of Reinforced Concrete Structures
Effect of Carbon Black on the Properties of Polyimide Foams
Research on the Effect of Superfine Powder Micro Bead on the Properties of High-Strength Concrete
The Interlaminar Stresses Analysis of Composite Laminated Plates Based on the Generalized Higher-Order Global-Local Plate Theory
Global Gaussian Collocation Method for Free Vibration Analysis of Laminated Composite Plates
Experiment Study on the Effects of the Dehydration Methods on the Micropore Structure Characteristics of Bentonite
An Analytical Solution of Natural Frequency for Symmetric Laminated Composite Plates
The Experimental Study of Using Composite Polymer Fiber in Concrete
Experimental Study on the Effect of Cathodic Protection System for Concrete Slab Specimens with Zn-Mesh Sacrificial Anode in Marine Environment
Finite Element Modelling of Steel Corrosion in Reinforced Concrete Cylinders
Optimization of Fermentation Medium for Pullulan Production by Aureobasidium pullulans A225 Using Plackett-Burman and Response Surface Methodology
The Research on Early Age Deformation of Shrinkage-Compensating Concrete
Experiment Study on Mechanical Properties of Shotcrete under Heat Injury Environment of High Ground Temperature Tunnel
The Study of Curing Characteristics of Epoxy Asphalt
The Design and Preparation of Foam Concrete Absorber for WLAN Anti-Jamming EMW-Absorber
Preparation of Novel Foaming Agent and its Application in Foam Concrete
Recycling MSTP Sludge as an Admixture in Concrete
Researches on the Application of Cement and Fly-Ash-Flushed-by-Seawater Stabilized Crushed-Stones Roadbases
Study of Adherend Thickness Influence on the Bond Strength of Carbon/Epoxy Composite Joints
Preparation of a New Unburned Brick from Ti-Bearing Blast Furnace Slag and PVA Modified by Epikote
Chapter 4: Micro/Nano Materials
Effect of Oxalic Acid and Temperature on Hydrothermal VO2 (B) Transformation to VO2 (M)
In Vitro Release Characterization of Tetracycline Hydrochloride from PLGA/Tetracycline Hydrochloride Electrospun Nanofiber Mats
Pretreatment of Bamboo Powder for Cellulose Nanocrystalline by Sulfuric Acid Hydrolysis
Synthesis of Silver Nanowires by 5-Hydroxy-Tryptophan
Influence of ZnO Powders on the Stability of the Foams Stabilized by Surfactants
Ionic Liquid-Assisted Synthesis of Anatase Nanostructured TiO2 Aerogel Doped with Fe3+ by a Low Temperature Sol-Gel Process and its Photocatalytic Performance
Extracellular Biosynthesis of Ag Nanoparticles by Commercial Baker's Yeast
Controllable Biosynthesis of Gold Nanoparticles by Culture Medium of Baker’s Yeast
Preparation of Hierarchical CuO Nanoparticles and their Photocatalytic Activity
Preparation and Characterization of Hollow Spheres with Cubic Mesoporous Shell
Soft Template CTAB-Assisted Synthesis of Mesoporous Ni-B Amorphous Alloy Nanoparticles
Synthesis of Nanostructured PdMo Electrocatalysts for Oxygen Reduction Reaction in Fuel Cells
Study on Zeta Potential of Micron-Size Tourmaline Powders
Study on Organic Light-Emitting Diode Based Photonic Crystal Substrate Fabricated by Nanoimprint Lithography Technology
Analysis of Graphene Based on Femtosecond Probing
Nanodiamond/Polyimide High Temperature Dielectric Films for Energy Storage Applications
Synthesis and Characterization of CuO Nanorods by Hydrothermal Method
Synthesis of Copper Nanohexagons and Microflowers via a Surfactant-Assisted Hydrothermal Process
Study on a Novel Structure of Yttrium Complex, C4H10O10Y
Study on a Structure of 2,6-Pyridine-Dicarboxylic Acid Mn, Mn2(C7H3NO4)24H2O
Introduction of Adsorption Mechanisms Researches on Organic Chemicals and Metallic Ions on CNTs
Structural and Optical Properties of Well-Aligned ZnO Nanorod Arrays Grown by a Hydrothermal Method
Research Development on Hydrophobic Modification of Cellulose Nanofibrils
Synthesis and Characterization of MgO-Filled Rectangular Carbon Nanocapsules
Controlled Synthesis of Different Morphologies of SrWO4 Crystals via a Surfactant-Assisted Hydrothermal Precipitation Method
Preparation and Characterization of Graft Copolymerization of Methyl Methacrylate onto Chitosan
Study on the Photocatalytic Degration of Diesel Pollutants in Seawater by Li+-Doped Nano-TiO2
Liquid-Free Approach for Alignment of CNTs Bundles via Electrostatic Field
Application of a Nano-Material Releasing Anion on Rice Paper
Fabrication of Nanocolorants Using Miniemulsion Solvent Evaporation Technique
Surface-Modification of Sulfur Nanoparticles with Surfactants and Application in Agriculture
Study on Preparation of Polishing Powder for LCD
pH Dependence of the Size and Shape of the Gold Nanoparticles Prepared by Peptides
Synthesis and Characterization of SiC Nanoparticles with Lamellar Structures from Taixi Coal
Controlled Release Characteristics of PLA-Pluronic-PLA Nano-Sized Vesicles In Vitro
Effect of Grinding on the Photocatalytic Activity of Commercial ZnO Powder
Synergism between Intumescent Flame Retardant and Organo-Montmorillonite in Polypropylene Nanocomposites
Electrocatalytic Property Toward Dopamine and Uric Acid of the Nanoparticles TiO2 Modified Electrode
Phase Field Crystal Modeling for Nanocrystalline Growth
Fabrication of Fluorescent Polymer Crossbar Arrays and Microropes via Centrifugal Electrospinning
Preparation of Nanoscale Magnesium Fluoride Powders by Ultrasonic-Assisted Direct Precipitation Method
Electrochemical Behavior and Determination of Rutin at Inlaid Multi-Wall Carbon Nanotubes Modified Graphite Electrode and Reline Ionic Liquids
Mechanical Properties and Microstructure of PMMA-ZrO2 Nanocomposites for Dental CAD/CAM
Preparation and Luminescence of Host-Guest (SBA-15)-(Arsenano-III) Nanocomposite Materials
Synthesis and Characterization of Magnetic Microspheres
Preparation of Titania Nanowire Arrays by Sol-Template Method
Investigation of the Interference of Carbon Nanomaterials with SYBR Green I-Based Real-Time PCR
Effect of Different Particle Size of Nano-Zinc Oxide on the Surface Binding Energy in Polyimide/Zinc Oxide Composites
Chapter 5: Functional Materials
Yellow Organic Light-Emitting Devices Based on Alq Doped DPIHQZn
Magnetic Correction of Materials with Weak Magnetism Signals
The Research of Qualitative Analysis Method for Far-Infrared Fiber
Establishing Chemical Bond Layer of Poly(Ethylene Glycol) on NiTi Alloy Surface
Synthesis and Characterization of Ni-Doped ZnO Nanorods Prepared by Hydrothermal Method
Effects of Conductive Properties with Conductive Particles Blended in Conductive Silicon Rubber
Assembling of Composite of Ag/TiO2/Eu-MCM with Enhanced Photocatalytic Activity
Core-Shell Structured Nanocomposites with Electromagnetic Properties
Preparation and Characterization of a Novel Polyurethane Solid-Solid Phase Change Materials
Preparation and Properties of Photochromic Microspheres
Orange Electrophosphorescence of 2-(9, 9-Diethylfluoren-2-yl)-5- Trifluoromethylpyridine Iridium Complex
Pineapple Leaf Fiber as a New Potential Natural Fiber in Rope Making
Crystallographic Studies of Nd3-xYxFe27.5TM1.5(0.6=x=2.4, TM=Ti, Mo) Compounds
Isothermal Dehydriding Kinetics of Mg2Ni
