Buch, Englisch, Format (B × H): 170 mm x 240 mm, Gewicht: 4600 g
Buch, Englisch, Format (B × H): 170 mm x 240 mm, Gewicht: 4600 g
ISBN: 978-3-03785-033-6
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Sponsors, Committees and Preface
1. Iron and Steel
Simulation Research on the Penetration Phenomenon of Long Rod Armour-Piercing Projectile with Different Materials
Adsorption Behavior of Sulfamethoxazole as Inhibitor for Mild Steel in 3%HCl Solution
Precipitates and Lüders Elongation in Ferritic Stainless Steels Stabilized with Ti and V
The Analysis of Temperature Field and Residual Stress Distribution during H-Beam Cooling Process
Research of a Novel Low-Carbon High-Manganese Alloy Containing Boron
Effects of Mn on the Precipitation Behaviors in High-Nitrogen Austenitic Stainless Steels
Fractal Analysis of Raceway Boundary in COREX Melter Gasifier Model
Corrosion Inhibition of 45# Mild Steel in Acidic Solution by Some Norfloxacin
Microstructures and Textures During Annealing in Low Carbon Al-Killed Steels with Low Finishing Temperatures and High Coiling Temperatures
Numerical Simulation for Direct Reduction of Pure Zinc Oxide Pellet Containing Carbon
A New Evaluation Index of Coke High Temperature Properties - Starting Reaction Temperature
Effect of High Magnetic Field on Diffusion Behavior of Carbon in Pure Iron
Synthesis Pathway of Dioxins in Iron Ore Sintering Process
Effect of Magnetic Field Direction on Texture Evolution in Cold-Rolled IF Steel Sheet at the Initial Stage of Recrystallization
Atomistic Model of Amorphous Silicon Nitride by Melt-Quench Method
Study on the Recrystallization Behaviour of Hot Deformed Austenite in GCr15 Bearing Steel
Microstructure and Properties of 65Mn Steel after Austenite Inverse Phase Transformation by Sub-Temperature Quenching
A Study on Microstructure of Ductile Ni-Resist Cast Iron for Exhaust Manifolds and Mechanical Property at the Condition of Altermative Thermal Cycles
Preparation of Fe-Cu-Ni-Mo-C Alloy with High Performance by Powder Metallurgy Warm Compaction
Crack Research for Welded Joint of Steel Truss Bridge
Synthesis and Dielectric Properties of Ba(Ti,Y)O3 Solid Solutions to Ba3Ti2YO8.5-BaTiO3 Composites
Hypereutectic Al-Si-Mg In Situ Composite Prepared by Melt Superheating
The Study of Low-Velocity Impact Characteristics and Residual Tensile Strength of Carbon Fiber Composite Lattice Core Sandwich Structures
Simulation of Microstructure and Grain Size in Welding Heat Affected Zone Using Monte Carlo Method
Microstructure and Mechanical Properties of Hot-Rolled Low-Carbon Medium-Manganese TRIP Steels
Synergistic Inhibition Effect of Sodium Silicte and Phytic Acid for Carbon Steel in Neutral Salt Water
Precipation and Dissolution Behaviours of Secondary Phase in J55 Steel During Continuous Casting, Conveying and Heating
The Influence of Enamel Firing Process on Microstructure and Mechanical Properties of Steel Substrate
Characteristics of Hot Ductility and Fracture in Micro-Alloyed Q345B Structural Steel
Electrochemical and Quantum Chemical Investigations of Tinidazole as Corrosion Inhibitor for Mild Steel in 3% HCl Solution
Effect of Quenching Temperature on Microstructures and Mechanical Properties of Boron-Nickel-Added Nb-Treated HSLA H-Beams
Melting Temperature of a Selected Area in CaO-MgO-Al2O3-SiO2 Slag System
Effects of Temperature and Strain Rate on Thermal Deformation-Behaviour of Cu-P Weathering Steel
Experiment Research on Argon Shroud for the Protection of Steel Casting
Study on Thermal Physical and Chemical Properties of Sodium Pyroxenite in Baiyunebo Iron Ore
Effects of Impact Angles on Erosion-Abrasion Properties of Hypereutectic Al-Mn Alloy Matrix Composite Reinforced with Al2O3 Particulates
Study on Heavy Section Forging Steel for Reactor Pressure Vessel Applying Simulation Methods
Effects of Compound Silicate Gangue on Mineral Composition and Microstructure of Sinter Produced by Baiyunebo Iron Ore Concentrates
Studies on Technological Parameters of Optimal Soft Reduction about Superwide Slab Caster
Effect of Nitrogen on Mechanical Properties of 20MnSi at High Temperature
Structure Evolution in Steel Wires During Drawing
A Novel Characteristic Method on Fatigue Crack Growth of N80 Casing Drilling Steel
Study on the Durable Factors of the Grain Size in 18CrNiMo7-6 by Heating and Cooling Method
Aluminizing Mechanism and Corrosion Resistance of Pipeline Steel X80 by Combined Pack Cementation Process under Low Temperature
Effects of Rare Earths on Structural Transformation of Heavy Rail Steel
Development of Texture and Grain Boundary Character in a Boron Bearing IF Steel after Recrystallization Annealing
Discussion on Burden Calculation of Ferromanganese Alloy Production
Effect of Heat Imput on Microstructure and Toughness of High Strength Bridge Steel
Study on Ultrasonic Test Defects Causes of Medium Plate
Research on the Impact Toughness of Basalt Fiber Reinforced Composites
Study on Characteristics of Ultrasonic Fields by Hydraulic Model of Ladle Refining
Study on Effects of Pretreatment on Carbide of a Medium-Alloy High Carbon Steel
The Comparison of Electrolysis Manganese Craft on Stainless Steel and Titanium
The Influence of Basalt Fiber Orientation on the Mechanical Property of Composite Board
Effect of Mold Flux for Casting on Microstructe of Mould Powder
Study on the Cooling Process of Low Yield Ratio 590-780MPa Grade Steel Plates for High-Rise Buildings
Effect of Divorced Eutectoid Transformation Temperature on Behaviour of Cementite Growth in GCr15 Steel
Cold Model Study of Raceway in COREX Melter Gasifier
Behaviours of Zinc and Lead in Blast Furnace of Baotou Iron and Steel Group Co.
Tensile Strength Statistical Analysis of B610CF Steel
Evolution of Microstructure and Oxidation Layer of 430 Stainless Steel During Hot Rolling
Effect of Heat Treatment on the Structure and Mechanical Properties of the Hot-Rolling Plate of Fe-42% Ni (4J42)
Study of the Coefficient of Thermal Expansion for Steel Q235
Study of Bake Hardenability for Hot Rolling Low Carbon Steel
Effect of Ultrasonic Treatment Time on Inclusions in High Carbon Steel
Effects of Applied Compressive Stress on Microstructure and Mechanical Properties of Cr-Mo Steel During Continuous Cooling Bainitic Transformation
A Study on Flow Characteristics of Coherent Jet Oxygen Injector
Investigation on Friction and Wear Property of Al2O3-Sio2(Sf) / AZ91D Composite
Investigation on Aging Behaviour of Al2O3-Sio2(Sf) / AZ91D Composites
A New Idea for Improving Heat Fade Performance of Organic Based Friction Materials
Wear Behaviour of Thermal Spray Welded FeNi and CeO2 Composite Coatings
Effect of Static Magnetic Field on Distribution of Elements in the Fe-S, Fe-Si, and Fe-Mn Alloys
Effect of Pulsed Electric Field on the Distribution and Migration of P, S, and Si Elements of Fe-Based Alloys
The Effect of Hot-Rolled Coiling Time on the Texture of a New Cold-Rolled Non-Oriented Electric Steel
2. Micro / Nano Materials
Physicochemical, Gel Structure and Morphology Properties of Nano Rice Starch Prepared by Ultrasound
Facile Preparation of Nanoporous SnO2 for Application in Photodegradation of Methylene Blue
Preparation of PS@SiO2, PS@TiO2,PS@TiO2/SiO2 Core-Shell Composites by a Spray Drying Process and Their Hollow Spheres after Removing PS Cores by Calcinations
Combined Manufacturing Process of Electrochemical-Etching and Electroplating on Nanoporous Silicon for its Metallization
Synthesis of Gold Nano- and Microplates by Tryptophan and 5-Hydroxy-Tryptophan
Influence of Temperature for Synthesis of Carbon Nanofibers from the V-Type Pyrolysis Flame
Characterization of Protein Powder from Waste Rabbit Hair
Corrosion Behaviour of AISI 304 Austenitic Stainless Steel Fabricated by Equal-Channel Angular Pressing
Controllable Assembly of Au Nanorods through Recognition of h-IgG and Anti-h-lgG Fab
Magnesium-Based Hydrogen-Storage Materials from Milling for Sulfocompound Hydrodesulfurization
Fabrication of Ti2AlN by Mechanical Alloying and Hot Press Sintering
Electrochemical Synthesis for Uniform and Large-Scale Zinc Oxide Nano Structure Films
Study on the Spread of the Energy Gap in Nanostructure System
Carbon Nanotubes with Uniform Wall Thickness Synthesized Via a Solid-Liquid Reaction
Synthesis, Characterization and Gas Adsorption of Titania Nanotubes
Preparation of Nano-Powders of ITO
Research on Ultrafine PTFE Particles with Grease Tribological Properties
Synthesis of Nanocrystalline TiC1-xNx by High Energy Milling
Researching on the Adsorption of Protein on Gold Nanoparticles
The Lattice Change of Ni-P Layer Coated on Single-Walled Carbon Nanotubes
The Acoustic Insulation Property of a New Non-Woven Material
Fabrication and Characterization of Nanocrystalline NiO Prepared by Sol-Gel Process
Rapid Fabrication of Cu-Al2O3 Nanocomposition Coatings
Preparation and Characterization of Cassava Starch-Chitosan/Montmorillonite Nanocomposites
Absorption of Eriochrome Blue Black on Polyaniline/Attapulgite Nanocomposites
Synthesis of Type-A Zeolite in Hydrothermal Condition with Stellerite
Synthesis and Characterization of Titanate Nanotubes and Nanowires in a Revolving Autoclave
Large-Scale Patterning and Assembly of Carbon Nanotubes by Microfluidic Hydrodynamic Focusing
Engineering of Soybean Extract Powder: Identification, Characterisation and Stability Evaluation
Preparation, Characterization of Nanoscale Zero-Valent Iron and its Application in Coking Wastewater Treatment
Fabrication of the SnO2/Al2O3 Catalysts through Electrospinning
Electromagnetic Characteristics and Microwave Absorption Properties of CNT Composite
Influences of Nd3+ Ions Substitution on the Structure and Electromagnetic Properties of the Nanocrystalline Co0.5Zn0.5Fe2O4 Ferrite
Ni-Al2O3 Nanocomposites Electroforming Process under Ultrasonic and Agitation
Study the Relative Permeability of Ferrofluid with the Mean Value Analysis of Experimental Apparent Gravity
Effect of Edge Activator on Characteristic and in Vitro Skin Permeation of Meloxicam Loaded in Elastic Liposomes
Development of Chitosan Nanoparticles for Gene Delivery Using Electrohydrodynamic Spraying Techniques
PbSe Nanocrystals Synthesized by an Ultrasonic Electrochemical Method
A Hollow Microneedle Carrier for Enhancing Skin Penetration of Large Molecular Compounds
Corrosion Behaviour of Ultra-Fine Grain Chromium Bronze Prepared by Equal-Channel Angular Pressing in Nacl Solution
Preparation and Characterisation of TAM-PLGA Microspheres by Solvent Evaporation
Synthesis of High Surface Area Porous Silicon Carbide by a Modified Sol-Gel Method
Self-Supporting Honeycomb Films of Polyphenylene Oxide Fabrication and Characterization
Investigation of Nano-Powders Made by Spark Discharging Reaction
Sputtering Phenomena of ZnS Nanoparticles with Graphite Sheaths by Impacting of High-Energy Electron in a Transmission Electron Microscope
Study on Design for Remanufacturing Facing Total Remanufacturing Process
Preparation Principle and Crystal Growth Kinetics of Loaded Nanocrystal TiO2
Synthesis and Field Emission of ZnO Bundles with High Aspect Ratio by Solution Method
Carbon Nanotube Templated Growth of the Nano-Crystalline NaY Zeolite
Fabrication of Large-Area Silicon Nanowire Arrays Based on Electroless Metal Deposition
Technological Properties of Poplar Particle/Waste Rubber Powder Composites
Effect of Additive on Microstructure and Property of Bulk Nanocrystalline Co-Ni Alloys Prepared by JED
Coagulation Method for Preparing Antimony-Doped Tin Oxide (ATO)/Poly(methyl Methacrylate) Nanocomposites and their Electrical Conductivity and Thermal Stability
Preparation and Photoluminescence Properties of Tadpole-Like Amorphous Silica Nanowires
Optical Studies on Multiwalled Carbon Nanotubes via Modified Wolff-Kishner Reduction Process
Preparation of Coral-Like a-Fe2O3 Nanostructures and Magnetic Properties
Effects of Solution Parameters on Morphology and Diameter of Electrospun Polystyrene Nanofibers
One-Step Wet Synthesis and Characterisation of Hydrophobic Magnesium Hydroxide
Facile Fabrication of Single Crystalline Fe3O4 Nanorods and its Magnetic Properties
Preparation of Composite Conductive Microspheres Used in Anisotropic Conductive Adhesive Films
Fabrication and Characterization of Chitosan-Ethylenediaminetetraacetic Acid/Polyvinyl Alcohol Blend Electrospun Nanofibers
Preparation of Nicob/SiO2 Nanoalloy Catalysts and their Catalytic Hydrogenation Performance
Influence of Sintering Temperature on Densification and Microstructure of Zn3Nb2O8 Ceramics Derived from Nanopowders
Rapid Preparation of V2O3 and VN Nanocrystals by Ammonolysis of the Precursor VOC2O4•H2O
Appropriate Conditions for Preparation of Nanosized WO3 through High-Energy-Milling
The Tribological Properties of PA6/UHMPE Blended Short Carbon Fiber Nanoclay Filled Nanocomposites
Analysis the Structure Parameters of the SOI Rib Waveguide
Spin Polarized Transport through Structures Consist of the Ferromagnetic Semiconductor in Presence of a Inhomogeneous Magnetic Field
Surfactants-Controlled Morphosynthesis of Strontium Carbonate
Preparation of ZnO Nano-Suspension and its Antibacterial Effect on Escherichia Coli
Hydrothermal Preparation and Formation Mechanism of ZnSn(OH)6 Cubic Aggregates and Zn2SnO4 Octahedra
Effects of Process Conditions on Properties of Nano-Magnetic Fluid
Synthesis and Characterization of Pyrochlore Lead Zinc Niobate Nanopowders Derived from Zn3Nb2O8 Precursor
Synthesis, Characterization and Optical Properties of a Novel Piperazine Derivative Microcrystal
Microstructure and Microhardness of Copper Subjected to High Pressure Torsion
Study on Pore Structure and Sulfur Fixation Characteristics of Alkali Industrial Waste
Thermo-Responsive Dispersion of Multi-Walled Carbon Nanotubes Modified with Poly(N-Isopropylacrylamide-Co-Acrylic Acid)
Spunbonded Nonwovens Made from Segmented Pie Filaments
Fabrication of Flake-Shaped Core-Shell Micro Particles by Way of Thermal Decomposition of Pentacarbonyl Iron on Diatomite Surface
Synthesis and Antioxidant Activity of Resin of Chitosan Cerium Encapsulated Green Tea Extract Microspheres
Fabrication of Micro-Silicon Filter and Separating of Blood Cells
Carbon Nanolines Grown on Carbon Cloth Prepared by a Two-Step Method
Synthesis of Nano-Strontium Titanate Immobilised on the Silica Gel G and its Application in Removal of Heavy Metal Ions from Water
Synthesis and Characterisation of Bicone-Shaped and Monodispersed Nanoparticles of Cu2S
Research on Cement Pulverized Admixture of Waste Concrete Powder
Preparation of Porous Nano-Strontium Titanate and its Application in Removal of Heavy Metals from Environmental Water
A Facile Method for Fabrication Zinc Oxide Nanoparticles with Green-Photoluminescence
Preparation and Characterization of Thermo-Sensitive Hydroxypropylmethyl Cellulose/Poly (N-Isopropylacrylamide) Hydrogel
Dihexadecyl Phosphate-Assisted Synthesis of Unusual Calcium Carbonate Microspherules
Characterization of Well-Dispersed CeO2 Nanoparticles Prepared by a New Method of Reverse Microemulsion
Hydrothermal Synthesis and Characterization of Novel MoS2 Nanoflowers Directed by Ionic Liquid
The Effect of Biology Activity on WS during Anaerobic Digestion
Solvothermal Synthesis of Cd1-xZnxS (x = 0-1) Nanorods Using Single-Source Molecular Precursors
Leaching Behaviour of Heavy Metals from the Class C Fly Ash-Based Geopolymers
Effects of Bentonite Clarificants on Organic Acids Contents in Red Wine during Clarification
3. Building Materials
Performance Tests of Surface Burning for Firestop Materials
Preparation and Charcterisation of PSt/GMA/DVB Microspheres by Soap-Free Emulsion Polymerization
Petal-Like Morphology on the Surface of Porous Anodic Alumina
Influence of Fly Ash on Crack Resistance of Mass Concrete
Application of an Anisotropic Material of Thermal Conductivity in Building Envelope
The Concrete Structure Strengthen Technology and Engineering Application
A New Fatigue Strength Measuring Method of Steel Bar in Concrete
Study of Rubber Asphalt Modification Mechanism
State of the Art of Constitutive Model of Concrete Materials Based on Damage Mechanics
Setting Behaviour of Phosphate Cement
Experimental Investigation into the Impact of Polypropylene Fibers and SRA on the Early Crack Resistance of Concrete
The Application of Carbon Fiber Reinforcement in Tunnel Second Lining Cracks
The Analysis on the Mechanical Property and Durability of Carbon Fiber Reinforced Concrete
In Situ Observation Microstructure Character Changes in the Carbonation Process of Hardened Cement Paste Using ESEM/EDS
Synthesis and Characterisation of Tb4L3(Phen)0.75•7H2O Nanorods
The Function Study of TiO2 Catalysts on Zinc Air Battery
Electromagnetic Shielding Effectiveness of Cement Based Materials with Scrap Tires Wire - FeCuNbSiB Amorphous Alloy Powder
Slag-Clay Foam Cement as Roof Material for Passive Evaporative Cooling
Experimental Research on the Mechanical Parameters of Frozen Pipes under Low Temperature
Research on the Pore Structure of Alkali-Slag Cement Stone Activated with Water Glass
Influences of Environment Climate Conditions on Concrete Carbonation Rate
Study on the Hydraulic Conductivity of Sand-Bentonite mixtures used as Liner System of Waste Landfill
Numerical Simulation of The Drying Shrinkage Process of Concrete
The Frost Model of Concrete in the View of Damage Mechanics
Effect of Ground Phosphate Slag on the Resistance to Chloride Ion Penetration of Concrete
Simulation of Fracturing Process for Heterogeneous Material under Uniaxial Compression
A Study of Interfacial Transition Zone in Lightweight Aggregate Concrete
Effect of Fly Ash on the Workability of Nondispersible Underwater Concrete
Effect of Pore Structure of Sandstone on Hydrophilic Characteristicis
Photoinitiated Emulsion Polymerization of P(MMA-co-DVB) Microspheres with Low Power Ultraviolet Light
Study on Interfacial Properties of Ultra-High Performance Concrete Containing Steel Slag Powder and Fly Ash
Preparation and Characterisation of a Compatilizer of PP-RTV Blends
Carbon Sequestration Analysis of Wood Construction Architecture
3-D Numerical Modelling of Mesoscopic Configuration and Cracking of Concrete
Numerical Simulation of Temperature and Creep of Concrete Surrounding Spiral Case in a Hydraulic Plant
Material Test on Aluminum Alloy Round Pipe for Building Structure
The Experimental Study on Strength of Subgrade Soil Treated with Liquid Stabilizer
Comparative Study on Crack Width Prediction for Concrete Flexural Members with GFRP Reinforcement
Study on the Influence of Chloride Ion Content on Pavement Performance of Base Material with Fly-Ash-Flushed-By-Seawater
Microscopic Mechanism Study on Carbonation Resistance of Recycled Aggregate Concrete
Influence of Cement Particle Size Distribution on Strength of Cement Paste
Prognosis of Alkali Aggregate Reaction with SEM
A Study for Substituting Part of Raw Materials by Bottom Ash in Portland Cement
Properties of the Mortar Modified with the Styrene-Acrylic Emulsion
Study on Mechanical Properties of Soda Residue / Fly Ash Composite Cementitious Material
Experiments for Strength Properties of Polypropylene Fiber-Reinforced Concrete
Mechanism of Preferential Adsorption of Carboxylic-Vinyl Copolymer, Hydroxy Carboxylate and Sulfonation - Polyol in Cement Hydration Process
Triaxial Shrinkages Tests of Unsaturated Compacted Clay
Experimental Study on Relationship between Saturation Degree and Void Ratio of Remolded Soils on Drying Path
Experimental Investigation Properties on Resistance of Slag Cement Concrete to Sulfate Attack
Research on Mechanical Property of Single Panel Fire-Resistant Glass with Cs+ Ion and Rb+ Ion Exchange
Effects of Adhered Mortar Content on Quality of Recycled Coarse Aggregate of Concrete
Experimental Research on New Concrete Air Entraining Agent
Research on Application Technology of TLA Modified Asphalt Mixture
Mechanical Property of Solidified Concrete by Explosion as Concrete is in Flow Pattern
Preparation of Potato Starch Graft Copolymer and its Application in Functional Coatings
Research on Moisture Porosity Test of Explosive Lining Materials after Long-Term Water Immersion
Effect of Gypsum on Strength Development of Steam-Cured Concrete
Research on Performance of Cement Stabilized Skeleton-Dense Structure Aggregate Base Course Material
Mesoscopic Thermal-Mechanical Fire Damage Modeling of High Performance Concrete
SEM and XRD Investigation on Mechanism of Expansion and High-Early-Strength of a Cementitious Composited Grouting Material
Basalt Fiber Reinforced Concrete
Experimental Study on Dynamic Mechanical Behaviour of Concrete with High Temperature
Experimental Research on Performance of Anchorage of Planting Rebars with Inorganic Material in Concrete
Research Status and Prospects of the Smart Concrete
Preparation and Properties of New Polycarboxylate-Type Superplasticizer
Researches and Application of Railway Wind-Break Wall
Impact Strength Test and Numerical Fitting of Plybamboo Form
The Status and Development of New-Type Wall Material
The Study on the Properties of Super Absorbent Polymer in Expansive Concrete
Effect of Particle Size on Expansive Behaviour of MgO-Based Expansive Agent in Cement Paste
Experimental Study on the Bending Resistance Performance of GFRP Tube Filled with Steel-Reinforced High-Strength Concrete Flexural Component
Calculation of Flexural Capacity of SRC Beams Strengthened with CFRP
Reliability Research of RPC Low-Height T-Beam in Railway Bridge
Shear Lag in Thin-Walled Box Girder with Variable Section
Properties of Recycled-Cement Produced from Waste Concrete
Determination of Tensile Strength of Compacted Loess by Double Punch Test
4. Metal Alloy Materials
Enhancing the Toughness of Heavy Thick X80 Pipeline Steel Plates by Microstructure Control
Effect of Ultrasonic Power on the Microstructure and Hardness of Commercially Pure Aluminum
Recent Developments for Isochronal Transformation Kinetics Model and their Applications
The Kinetics of the Austenite-Ferrite Phase Transformation of Fe-4Cr Alloy during Continuous Cooling
Plastic Strain Energy in Low-Cycle Fatigue of A356 (Al-7Si-0.4Mg) Aluminum Alloys
Microstructures and Hardness of Silver Alloys after Internal Oxidation Process
Effects of Erbium Addition on the Corrosion Resistance and Microstructure of AZ91 Magnesium Alloy
Effect of Solution Treatment Temperature on Microstructure and Mechanical Properties of Cr20Ni32AlTi Alloy
Study on Interaction between Cerium and Arsenic
Flow Stress Behaviour of TWIP Steel during the Hot Compression Deformation
Discussion on Relationship between Viscosities of Molten Zr-Cu Based Alloys and their Glass Forming Ability
Forecast and Analysis of Transformation Point of TC6 Titanium Alloy
Effect of Cr and Zr Addition on the Corrosion Behaviour of Copper in the Chloride Solution
Effect of High Pressure Heat Treatment on Microstructure and Corrosion Resistance of Brass
The Influence of Deformation on Dechromization Corrosion of CuCr Alloy in H3PO4 Solutions
Effect of Element Re on Creep Behaviour of a Single Crystal Nickel-Based Superalloy
Microstructure and Properties of Cu-17Fe Alloy Aged Treatment in High Magnetic Field
Characterization of Precipitates in Bend-Age-Formed 2124 Aluminium Alloy
Effect of Composition and Temperature on the Formation of Delta Ferrite in the Billet for P92 Steel
Effect of Trace Boron on Microstructure and Mechanical Properties of Ti-9V-3Al-3Cr-3Zr-3.5Mo Alloy
Analysis of the Valence Electron Structures of the Strengthening Phases Al8Fe4Ce and Al4Ce in Al-Fe-Ce Alloy
Effect of Sr + RE Combination Modifier on Microstructure and Mechanical Properties of Al-40 Wt% Si Alloy
Microstructures and Properties of Cu-Cr-Y Alloy after Cold Worked and Aging
Hot Corrosion of Cobalt-Based Alloy with (Na, K)2SO4 Coating at 900 °C
Mechanism of the Flux Improving the Microstructure and Mechanical Properties of AZ91D Magnesium Alloy
Effect of Temperature on Recrystallisation Texture and Microstructure for Non-Oriented Silicon Steel under Asymmetrically Rolling Process16
Influence of Yttrium and Heat Treatment on Microstructure and Mechanical Properties of AM60 Alloy
Study on the Thermal Fatigue Resistance of Cr17Mn10Ni3 Heat-Resistant Steel
Numerical Simulation of Surface Hardened Layer of the Hydraulic Track
Effects of Two-Step Aging Temperature on Exfoliation Corrosion of an Al-Zn-Mg-Cu Alloy
The Influence of Thermomechanical Treatment on the Microstructure and Properties of a Wrought Al-Mg-Si Alloy
Effect of Ni on Characteristics and Structure of Aluminium Brass
Recrystallisation Behaviour of Cu-20Ni-5Sn Alloy
Characterization of ß' Precipitate Phase in Aged Mg-12Gd-2Y-0.5Sm-0.5Sb-0.5Zr Alloy
A Study on Corrosion of Cast-On-Strap Alloys
Displacement Based Seismic Design Method of RC Frame with Friction Dampers
Effect of Ca on Microstructure and Properties of Mg-Al-Si Alloys
Effects of Sb on Microstructure and Mechanical Properties of Mg-5.5Al-1.2Y Alloy
Solid Solution Strengthening of Sm in Mg-10Y-1.5Sm Alloy
5. Composites
Preparation and Characterisation of Al/Pb Layered Composite Materials
An Analytical Method for 3-Phase Model of Electro-Magneto-Elastic Fiber Composites with Periodically Distributed Reinforced Phases
Sensitivity Analysis of Static Response for Composite Laminated Plates in Hamilton System
Meshless Method with Radial Basis Functions for Hamilton Canonical Equation
Study on Manufacture Technology and Mechanical Properties of Three Dimensional Braided Composite Support with Irregular Shape
Thermomechanical Properties and Morphology of Liquid Crystalline Polyurethane/Epoxy Resin Composites
Recent Progress on Carbon Coated Lithium Titanate
Preparation and Characterisation of Konjac Glucomannan (KGM)/SiO2 Nanoparticles Blend Film
Effects of Particle Size and Volume Fraction on Extrusion Texture of SiCp/Al Metal Matrix Composites
Experimental Research and Regression Analysis for Constant Temperature Drying of Wheat Straw
Experimental Investigation on First Crack Strength and Crack Widthof Reinforced Concrete Beamsby Side-Bonding CFRP Sheets
The Stability Research of Montmorillonite/Octadecyl Trimethyl Ammonium Complexes
Preparation and Flame Resistance of Hydrotalcite/Epoxy Nanocomposites Containing Red Phosphorous
Pressureless Sintering and Properties Investigation of Silicon Nitride
Study on the Natural Fiber/pp Wrap Spun Yarns Reinforced Thermoplastic Composites
Effect Of PP-G-MAH on the Compatibility of Lignin/LDPE Composites
Study on the Characterisation and Photocatalysis Reactivity of TiO2/Cu Composite Particles
Manufacture and Testing of a Moderate Size Integrated Marine Composite Propeller
Study of the Structural Design and Capacitance Characteristics of Fabric Sensor
Separable K-Canonical Formulation of Rectangular Element and Symplectic Integration Method for Analysis of Laminated Plates
Rheology and Thermal Properties of Polypropylene/Poly(phenylene Sulfide) Microfibrillar Composites
Preparation and Characterisation of Polyaniline Grafted Multiwalled Carbon Nanotubes/Epoxy Composite
Thermodynamics on Formation of Condensed Phases during CVD Si3N4 Process with Sicl4-
