Sonstiges, Englisch, Band Volumes 117-119, 2090 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Sonstiges, Englisch, Band Volumes 117-119, 2090 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Applied Mechanics and Materials
ISBN: 978-3-03795-105-7
Verlag: Trans Tech Publications
This collection of peer-reviewed papers describes the latest advances in, and applications of: basic mechanics and research methods, dynamics and vibration, solid mechanics, fluid mechanics and thermodynamics, biomechanics and environmental mechanics, new materials and advanced materials, functional materials, materials processing technology, welding and mechanical connections, fracture, etc. the work is thus a usefully up-to-date guide to these topics.
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Research on Control Effectiveness of Semi-Active MR-TMD to some Coal Gas Manufacturing PlantDirect Tensile Strength Measurement of ConcreteDynamic Simulation and Test for the Valve Train DynamicsOccluded Object Tracking Based on Mean Shift and Accumulation Error SuppressionStudies on Stability of Peanut Mango MilkApplication Study of Wa Nationality Totem Symbol of Lincang in Modern Furniture DesignRolling Element Defect Diagnosis Based on Local Mean DecompositionStudy on the FCG Prediction Model Based on Material?s LCF DamageStudy on Composite Model for Vibro-Replacement Stone Column Foundation by Finite Element MethodThe Application of Interval Analysis Method in the Stability AnalysisStress Distribution Rule of Reinforced Concrete Specimen under Uniaxial TensionAnalysis on Long-Span Bridge Seismic Response in Multi-Dimensional and Multi-Point ModeExperimental Study on Impact Compression and Spliting of GraniteResearch on Lower Muscle Strength Feature for Elite Speed Skaters in High Speed GlidingEffect of the Stress Balance on Determination of Rock Dynamic Fracture Toughness Using Holed-Cracked Flattened Brazilian DiscPreparation of Ni-Coated SiC Ceramic Composite Powder by Electroless PlatingCorrosion Behavior of Electroless Deposited Fe-Zn CoatingStudy on the Vibro-Acoustic Characteristics of a Vibration Isolation Mass Structure with Composite BracesNew Results of Buckling and Postbuckling Behaviors for Fiber-Reinforced Composite Shear Deformable Anisotropic Laminated Cylindrical Shell Subjected to TorsionSimulation Analysis of the Tensile Process on Sheet SampleCalculation and Analysis of 2-D Thermal Stress Field in Induction Motor with Compound Cage Rotor under Different LoadThe Sharp Indentation for Identifying Constitutive Relationship of Metallic MaterialsEvaluation of the Steep Slope Stability Based on Theory of GPS Monitoring AnalysisDifference and Application of Matrix Displacement Method and Finite Element Method in the Truss Structure AnalysisMechanism of Work Hardening of Mn13 after Asynchronous Cold RollingRecent Developments of Material Deformation MeasurementDetection for the Automatic Transmission of the Tractor Based on Spectroscopic TechnologyEdge Drop Constituent Analysis of Cold Rolled StripThe Existence of Positive Periodic Solution for a Class of Functional Differential Equation with Multi-DelaysResearch on Influence of Flexible Parts? Rigidity to Passenger Car Exhaust System?s ModalDesign and Finite Element Analysis in Hydraulic Retarder Bracket Based on ANSYSStudy on Stability of High Embankments under Complicated Stress ConditionsKinematical Analysis on the Technology of Overhead Smash between Badminton and TennisStudies on MAaximum Hydrostatic Testing Pressure for New PipelineNoether Symmetry and First Integral of Discrete Nonconservative and Nonholonimic Hamiltoinian SystemResponse Analysis on Asymmetric Twin Tower Building with Large Bases Subjected to Seismic ActionOne Numerical Simulation Method and its Applications for Fatigue Crack GrowthCarbonation of High Strength ConcreteNumerical Simulation of Cu-Cu Interface Thermal Resistance by Utilizing Laser Photothermal MethodSeismic Control Research of Longitudinal Floating Bridge Based on MR DamperModel Test Research of the Influences of Rock-Fall Impaction on Accelerations of the Cut-and-Cover Tunnel StructureStructure Design and Finite Element Analysis of Airborne Equipment Integrated Mounting ShelfMicrostructure and Mechanical Properties of a Rapid Directionally Solidified Ti47Al AlloyAn Impact Analysis of Turbine Guide Bearing Stiffness on Rotating Parts? Transverse Vibration CharacteristicsDynamic Responses of a Simply Supported Bridge to Moving Vehicle LoadsResearch on Technological Parameters of Laser CladdingStudy on Flow-Induced Vibration Characteristics of Hydraulic Hoist of Large-Span Upwelling Radial Steel GateDynamic Analysis of Axially Loaded Beams under Arbitrary Transverse ForceMechanics of Hairspring in Mehanical Watch MovementEffects of Process Conditions on Mechanics Properties of Micro-Foaming PP/GF CompositesStructural Fatigue Analysis on Expansion Joints of Diversion Penstock of Hydropower StationStudy on Properties of Al2O3 -CaO-CaF2 Slag SystemA Novel Simplified and High-Precision Inverse Dynamics Model for Magneto-Rheological DamperKinetic Analysis of Hydraulic Mount of Vehicular Engine Based on Fluid-Structure InteractionFinite Element Analysis of Ice-Cone InteractionNonlinear Seismic Analysis of Masonry Infilled RC Frame StructuresStability of a Supported Cylinder in Axial FlowThe Numerical Study of Concrete Mesostructures? Effect on Ballistic Responses in Penetration ProblemsStudy on Model of Thermal Crown of Single-Stand Irreversible Foil MillControl Final Cooling Temperature on High Strength of the Pipeline Radio Yield InfluenceStructure and Property of ZnO Content with Tb3+ Doped Zinc Aluminum Phosphate GlassStudy on in-Plane Bending Vibration of a Combined Ring-BeamThe FOPS Design of Wheel Loader Cabin Based on Topology OptimizationAn Investigation into the Earthquake Reaponses of Special-Shaped Arch BridgesSol-Gel Derived Titania/Hydroxyapatite Layer on Titanium SubstrateTemperature Distribution and Operating Efficiency in Rectangular Cold Crucible Directional Solidifying Ti46Al0.5W0.5Si AlloysAero-Elastic Active Control Modeling via Improved POD MethodThe Noise-Induced Chaotic Transition in a Vibro-Impact OscillatorStudy on Useful Concrete Elastic-Plastic Constitutive ModelNumerical Simulation of the Reverse Plugging of a Thin Plate Irradiated by Long Pulsed LaserEffects of Rare Earth La on Microstructures, Mechanical Properties and Sliding Wear Behavior of High-Aluminium Zinc Foundry Alloy ZA30Research about Numerical Integration Method for Structural Dynamic Response in Real Time on-Line TestResponse of Two-Disk Rotor with Squeeze Film Dampers and its Variation with ParametersExperimental Study on CFRP-Bonded Steel Plates with Thickness Reduction Using Underwater EpoxyResearch on Interface Structure and Fracture Mechanism of Diffusion Bonding of Titanium Alloy/Cu/Stainless SteelComprehensive Recycling of Construction WasteDynamics Analysis of the Bar-Type Piezoelectric Motor StatorEvaluation of the Mechanical Properties of Copper Thin Film and Copper Bulk at the Nano-Scale by NanoindenterGrain Growth Behaviors of Multicrystalline Silicon during Cold Crucible Continuous CastingInvestigation on Mechanical Properties of Pulsed Nd:YAG Laser Welding on AISI 304 Stainless Steel to AISI 1008 SteelReinforcement Phase of Situ TiC with the Laser Surface Alloying on Steel C1045The Performance and Strength Mechanism of Stabilized Aggregate Containing Special Cement with Desulfurization ResidueThe Continuity and Inheriting of Historical Context of Architecture during Urban Renewal in ChongqingStatic Stress and Modal Analysis of the Impeller of the High-Pressure Low-Flow PumpRate-Dependent Behavior and Constitutive Model of Polycarbonate at Strain Rate from 10-5 to 103 S-1Three Dimensional Cosserat Continuum Model and its Application to Analysis for the Cantilever BeamSeepage Analysis for Dashiban Landslide Applied Multi-Day Rainstorm once in Hundred YearsAnalysis of Fuzzy Stress and Strength Reliability of Double-Layer Pressure VesselElastic Waves of Anisotropic Saturated Porous Solids with Thermal EffectGreen Quasifunction Method for Bending Problem of Clamped Orthotropic Thin Plates with Trapezoidal Boundary ShapeThe Dimensionless Load Separation Method Used for Fracture Toughness Test and its ApplicationChemical Solidification Stress Calculation and Experiment of Concrete-Filled Steel TubeThree-Dimensional Viscoelastic Interactions of a Center of Dilatation with a Penny-Shaped Interfacial CrackCrack Propagation of Jointed Rock and ApplicationInvestigation on Spb Method Based on Nondimensional Load Separation Principle for SEB and CT SpecimensScalability Study on Large-Scale Parallel Finite Element Computing in PANDA FrameA Yield Criterion for Pressure-Sensitive MaterialsResearch on Parametric Design Platform of Gear Based on Pro/EAnalysis of Multiaxial Low Cycle Fatigue Life for Single Crystal Ni-Based Superalloy Based on Two-Phase Unit Cell ModelThe Reliability Analysis of Leaf Spring Based on PDSEffect of Ultrasound Treatment on Properties of Soy Proteins FilmDesign of the Microfluidic Chip of Oil DetectionThe Mechanical Analysis of Tubing in Deep Gas Wells in Volcanic ReservoirsThe Application of Dynamic Compaction Techniques Combining Plastic Drainage Plate to Improve Soft Soil Foundations in a CollegeNumerical Simulation of the Collapse of Stepped Circular Tube Subjected to Oblique LoadFuzzy Comprehensive Evaluation of Cutting Parameters when Milling Plane Features of Aeroengine Structure PartsStudy on the Force of Flexible Vacuum Cup Fixture for Aircraft Skin TrimmingLarge Deformations of Low Density Open-Cell Elastomeric Foams: Kelvin Model StudyThe Brief Introduction of High-Speed Trimaran Planing Hull and the Preliminary Study of the Longitudinal StabilityDynamics Optimization for the Valve Train of a Diesel EngineSimplified Second Order Model of Reynolds Equation for Simulating the Ultra-Thin Air Bearing Film in Hard Disk DriversHeat Transfer Enhancement of Viscoelastic Fluid in the Rectangle Microchannel with Constant Heat FluxesModification of Flow Stress Model Based on Internal VariablesInstability of Slip Flow between Two Concentric CylindersExperiment of Temperature Field for High Speed Orthogonal TurningThe Hydrodynamic Performance Prediction of Ship Hull with PropellerResearch on of Litterfall Production of Eucalyptus Globulus PlantationMicrostructure and Temperature Stability of Ca Substituted Forsterite CeramicsThe Effects of Flexible Deformation on an Oscillating Airfoil at Low Reynolds NumberAnalysis and Improvement of Mobile Payment Security Based on SET ProtocolThe Application of MATLAB in Computational Fluid Dynamic Visualization ProcessingTwo Dimensional Acoustic Manipulation in Microfluidic ChannelsCutting Force Impact to Tool Life of CT5015 in High Speed Machining by Applying Negative Rake AnglesThree-Dimensional Finite Element Analysis ShelvesInfluence of Tip Injection and Film Cooling for Blade Tip Flow and Heat TransferHydraulic Model and Numerical Simulation Study of Shuangwangcheng Pump StationA Novel Method to Fabricate Silver Chloride FilmsStudy of Pre-Tightening Force on Piezoelectric Multi-Dimensional Force Sensor?s Measurement PerformanceApplication of the Off-Line Simulation System of the Ship Maneuvering in Transition Section Navigation Research of the Continuous BendEffect of bct-5 Si on the Indentation of Monocrystalline SiliconNumerical Simulation of Two High Speed Trains Passing by each other in a Long TunnelGeneralized Reynolds-Orr Energy Equation with Wall SlipOrganophilic Modification and Application of Nano-Fumed Silica in Pervaporation of Ethanol / Water MixtureVibrational and Stochastic Resonance in FitzHugh-Nagumo Neural Model with Time-Delay and Colored Additive NoiseSafety Assessment of Bridge Structures under the Random Dense Vehicle LoadsDynamic Analysis of Response of Cofferdam with Steel Sheet Piles Induced by Earthquake ExcitationBiomechanical Comparison of Different Pedicle Screw Fixations for Thoracolumbar Burst Fractures Using Finite Element MethodStochastic Resonance in a Time-Delayed Logistic Growth Model Driven by Periodic Signal and White NoiseAnalysis of Discharge of Transmission Line in SandstormThe Comparative Study on Lower Limb Muscles between International and National Master Skating AthletesFish Sound Frequency Domain Analysis and Acoustic Spread Distance Experiment ResearchControl Standard of Ground Surface Settlement Induced by Running Tunnel Construction in Beijing SubwayStructural Analysis of Conical Bottom-Supported Offshore Wind Turbine FoundationOne Dynamic Model of Human Elbow Joint in the Sagittal PlaneThe Comparative Analysis on Muscles of Short and Long Track Speed Skating AthletesEffect of Tensile Strain and Gold Thickness on the Micropattern Topography of Gold Thin Coatings Deposited on PolydimethylsiloxaneExperimental Investigation on the Vortex-Induced Vibration of the Cylinders with Helical StrakesThe Multi-Joint Measuring Arm?s Error Compensation Method Based on the Pose ConfigurationsQuality Control of Casting Slab for 510L SteelEffect of Temper Temperature on Microstructures and Mechanical Properties of 8CrV Saw Blade for MetallurgyAn Overview of Recent Research Works on the Forming of Thermoplastic Composite SheetsThe Factors that Affect the Absorption of CO2 on the Lithium Zirconate MaterialsElectrodeposition of Cobalt Nanoparticles from Mixture of 1-Butyl-3-Methylimidazolium Chloride Ionic Liquid and UreaThe Effects of Nickel-Plating on Al2O3 Particles Reinforced Steel Matrix CompositesPorous Alumina from Protein Foaming-Consolidation Method Containing Hydrothermal Derived Hydroxyapatite PowderPreparation and Application of Titanate Nanotubes on Methylene Blue Degradation from Aqueous MediaA Novel Nonenzymatic Hydrogen Peroxide Sensor Based on Pd Nanoparticles Modified ElectrodeEffects of Filament Pre-Tension to the Characteristics of Solo-Sirofil Composite YarnEvaluation of Antioxidative Activity between CoQ10-Nanostructured Lipid Carrier and CoQ10 CosmeticCharacterization and Visible-Light Photocatalytic Activity of Nano-Bi2MoO6 Catalysts Prepared by Hydrothermal ProcessThe Preparation Technique of Nanometer Molybdenum Trioxide by Hydrothermal SynthesisStudy of Superconductivity of Fe-Doping DyBa2Cu3-XFexO7-d Systems Using Positron ExperimentStudy on Thermal Fatigue Performance of Cold Work Roll SteelThe Thermal Fatigue Performance for Cast Iron Brake Drum of Large TrucksSynthesis of Silver-Modified Sponge-Like Titanium Dioxide Arrays with Biomimetic Structure and its Enhanced PhotocatalyticFabrication of Porous Ceramic Scaffolds via Polymeric Sponge Method Using Sol-Gel Derived Strontium Doped HydroxyapatiteExperiment for Improving the Drum Strength of AgglomeratePreparation of Sn-In2O3 Nanoparticles Colloid SolutionPreparation and Characterization of Novel Lithium Tantalate TargetThe Research on Fabrication Technique of Al2O3 Short Fiber PreformNumerical Study on Adhesive Interface Reinforcement of Piezoelectric Composite under Impact LoadExperimental Investigations of Shear Lag Effect in a Simply Supported [0o /?45o2 / 0o]T Laminated Box BeamEffects of Aging Treatment on Performance of Explosive Welded Beryllium-Bronze/Carbon-Steel Composite PlateAblation Properties of C/C-ZrC-SiC CompositesThe Role of Alum in the Fabrication of Calcium Silicate for Dissolved Acetylene CylindersTesting on Energy Absorption of Banana Fiber Polyester CompositeNonlinear Response of Carbon-Carbon Composite Panels Subjected to Thermal-Acoustic LoadingsStudy on Cold-Pressing Technology for Mixture of Iron Ore and CoalResearch on Mechanical Properties of Separation Concrete-Filled Steel Tubes Subjected to Eccentric Compression on Non-Separation SideHot Deformation Behavior of the 30%Mo/Cu-Al2O3 Composite Prepared by Vacuum Hot-Pressed SinteringBehaviors of TiN Nanoparticles in Mn18Cr2 SteelCrystallization Kinetics of Amorphous Finemet Modified with CoThermal and FTIR Characterization of Unsaturated Polyester Resin/Epoxy Resin CompositesStudy on Effect of Different Preparation Process Parameters on Properties and Microstructure of SiO2/Cu CompositesStudy on Electrical Sliding Wear Property of Cu/MoS2/Mo CompositesOxide Film Morphology and Composition Analysis of TP304H Austenitic Stainless Steel at High TemperatureHot Deformation Behavior of Al2O3/Cu-10vol%WC CompositeMicrostructure and Properties of 31Mn2SiREB Cast SteelComparison of Conservatism on Applying Statistical Analysis Method to Determine Composite AllowanceControllable Synthesis of CuNWs in High Yield and their Potential Applications in SPR Based FieldsSynthesis of Monodispersed Ag-Coated SiO2 Nanoparticles with one-Pot Method and Investigation of its Antibacterial ActivityNovel Synthesis of TiO2 Nanocrystals Induced by Nanocrystal CelluloseResearch on Thermal Deformation State of Mould Copper Plate with Different CC Technical ParametersImpact Damage Behavior of Composite Stiffened PlatesHighly Sensitive and Selective Pymetrozine Colorimetric Sensor Based on P-Aminobenzenesulfonic Acid Modified Ag NPsExperimental Study of High Frequency Guided Wave Inspection of Anchored BoltsFine Spherical Tungsten Powder Prepared by Precipitation ReactionExperimental Study on Cutting Forces in Turning Aluminum-Silicon Alloy ZL104Experimental Tensile Study on the Behavior of Composite Material with Roving WavinessResearch on Ore-Proportioning Optimization Technology in SinteringFormation of Intermetallic Compounds on the Bond Interface of Aluminum-Clad Copper and its Influence on Bond Tensile StrengthThe Impact of Grain Size on Oxidation Behavior of TP304H Austenitic Stainless Steel at High Temperature in AirStudy on the Effect of Different Joints Material on GRP Jacking PipeThe Accelerated Corrosion of Elemental Sulfur for Carbon Steel in Wet H2S EnvironmentStudy on the Effects of Deformation Temperature on Microstructure and Mechanical Properties of AZ80 Magnesium AlloyPhysical Properties of Thermoplastic Cassava Starches Extruded from Commercial Modified Derivatives in a Pilot ScaleMircobial Sediment SolidificationHot Compressive Flow Behavior of Inconel 600 SuperalloyMicrowave-Assisted Extraction of Garlic Essential Oil from GarlicEffect of Calcium Stearate Concentration on Tensile Properties of Epoxidized Natural RubberEffects of Heat Treatment on Microstructures and Properties of Ti811 AlloysResearch on Corrosion Behavior of Al-Zn-In Based Anode Alloys by Circular Polarization MethodDevelopment of the Flux Solution for Omission of Water Washing Treatment of Hot Dip Galvanizing ProcessThe Study of the Properties and Function of Large Ball Mill with Liner MaterialEffects of Ga on the Corrosion Morphology of Al-Zn-Sn-Ga Anode AlloyResearch on Inverse Extrusion Process of High-Tin Wear-Resisting Cu-Sn-Pb-Ni AlloyComparison Study on Microwave Absorbing Properties of SiC AbsorbersInfluence of Nano-Silica on Solvent Absorption in Polypropylene PackagingResearch on the Application of VIPs to Reefer ContainersA Study on Magnetic Filter Controlling TiN Films Prepared by Arc Ion PlatingThickness Dependence of Structural and Optical Characteristics of AZO Thin Films for Organic Photovoltaic CellsEffect of Heavy Metals and Leaching Toxicity of Magnesium Potassium Phosphate CementStudy on Erosion Wear Property of Nickel-Chromium Cast IronEffect of Iron (III)-Doping on the Photocatalytic Activity of Titanium Dioxide Catalysts for Methylene Blue DegradationAnalysis of the Impact of Row Materials on the Performance of Self-Leveling Cement MortarInfluence of Refiner on the Properties and Microstucutures of High-Tin Wear-Resisting Cu-Sn-Pb-Ni AlloyApplication of Slow-Release Fertilizer with the Function of Water-Absorption and Water-Retention in Position Engineering CamouflageExtraction Behavior of Mercury(II) and Cadmium(II) in Ion Liquid Extraction System Using 1-Butyl-3-Methyl-Imidazolium Hexafluorophosphate and 8-Hydroxyl-QuinolineEffect of Aging Treatment on Microstructure and Properties of Cu-3Si-2Ni AlloyTensile Properties and Microstructure of ZK60 Magnesium Alloys at High TemperatureStructure and Compression Properties of Polyurethane-Imide FoamsPrepartion of Al-Mn Alloy Coatings on Low Carbon Steel by Hot-Dip-AluminizingMicrostructure and Mechanical Properties of AZ81 Alloy with GdThe Dynamics for Aqueous Sodium Adsorption and Characterization of Natural PyrophylliteThe Microstructure of Ni-Based Surface Infiltrated Layer on Cast Steel SubstrateDetection Experiments of High-Barrier and High-Temperature Sterilization and Easy Tear Flexible Plastic Packaging Materials Applied in Food PackagingThe Design of a Compact Cable System for BridgeStudy Progress of Material Surface Modification with Large Scale Pulse Electron BeamPreparation and Contrast of Transparent Conductive TiO2/Ag/ZnS Film by Magnetron Sputtering and Evaporation Coating DepositionProperty Investigation on a Precious Ceramic AlloyLove Waves in a Piezoelectric Half-Space with an Anisotropic Elastic LayerEvaluation on some Properties of SL7560 Type Photosensitive Resin and its Fabricated PartsModeling and Prediction of Creep Behavior of Polypropylene Packaging BeltResearch on Failure Criteria of Homogenization Model of MasonryThe Effect of Pressure-Induced Flow Processing on the Tensile Properties and Crystal Structure of PolypropyleneEffect Evaluation of Slope Protection for Herbs Based on the Principal Component AnalysisMechanical Performances of Concrete Made with Manganese SlagStudy on the Performance of a Novel Shrinkage Reducing Admixtures (SHSRA) of ConcreteImprovement of Hydrogenation and Dehydrogenation Kinetics on MgH2 by the Catalytic Effect of ZrO2An Experimental Study on Relationship between (Meth)Acrylate Polymers Structure and its Film Surface WettabilityHemicellulose Extraction from Coconut ShellSynthesis of Polymers Containing C-N Bond Using Pd-CatalystThermal Bridges in Building Envelope in Hot Summer and Cold Winter Areas of ThinkingCorrelations between Different Hardened Properties of High-Strength Self-Consolidating Concrete Including Palm Oil Fuel AshInfluence of Carbon Content on Fe-Cu Alloy Material Performance in Induction Motor with Compound Cage RotorSynthesis and Drug Release from a PH/Temperature Sensitive Bead of Poly(N-Acryloylglycinate) and AlginateEffect of Phosphorus Slag and Fly Ash on Anti-Corrosion Property of High Belite CementInfluence of Porosity on Polarization in Piezoelectret Films with Regular MicrostructureDynamic Characterization and Drug Release of Thermosensitive Poly(N, N-Diethylacrylamide-Co-Itaconic Acid) Copolymer HydrogelsEffects of Ca on Mechanical Properties of Mg-6Zn-3Al AlloyHigh Temperature CO2 Adsorption on Si-Doped Lithium ZirconateDrug Release of a PH/Temperature Sensitive Core-Shelled Beads from Sodium Alginate and Poly(N-Acryloylglycinate)Investigation of Vibration Properties of Multi-Walled Carbon NanotubesGrowth Mechanism of Hollow ZnO Microsphere with Aperture Prepared by Oxidation of Zn PowderThe Law of the Grain Size Changing in the Warm Tension Test for the B340/590DP Dual-Phase SteelStudy on the Microstructures and Wear Resistance of ZG30 Steel Surface LayerEffect of Bath Compositions on the Properties of Electroless Ni-Cu-P Alloys on AluminumSimulation of V Atom Substitution Character in Ni-Al-V AlloyEffects of Annealing Temperature on Properties of CuIn (Se,S)2 Film Prepared by SputteringAdsorption Behavior on Modified Fly Ash/EPDM Composite for Application in Machine OilEffect of the Duty Cycle on Boronized Layer Formed by Pulse ElectrodepositionSynthesis of Lactic Acid Grafting Starch Copolymer Catalyzed with Stannous ChlorideSurface Modification for Porous Artificial Lightweight Aggregate and Mechanical Properties of the Resulting ConcreteBuilding of Poly(Imino Ketone) Chains Model via Molecular SimulationNano-Crystalline Diamond Films Deposited on Copper Substrate by MPCVD MethodEffects of Solid-Solution Treatment on Microstructure and Mechanical Properties of HIP Treated Alloy 718Facile Synthesis of N-{2-[4-(2-Pyrimidinyl)-1-Piperazinyl]ethyl} Adamantane-1-CarboxamideSynthesis and Spectroscopic Properties of LiY(WO 4)(MoO 4): Eu 3+ Red Phosphors for White LEDsStructures and Properties of the Coating for SPEEK/WPUEffect of Sn on Corrosion Resistance of Mg-6Al-1.2Y-0.9Nd AlloyThe Research on Technology of Electroless Ni-W-P Ternary Alloys Plating on the Aluminium AlloyThe Effect of Bacterial Cellulose on the Mechanical and Thermal Expansion Properties of Kenaf/Polylactic Acid CompositesStrength Properties of Low Thermal Conductivity Fly Ash Bricks: Compressive and Flexural Strength AspectsFair-Faced Light Weight Aggregate Concrete Preparation and Durability ResearchCellulose Tris(3,5-Dimethylphenylcarbamate) Regioselectively Bonded to Small Pore Silica Gel as Chiral Stationary Phase for HPLCEvaluation on the Corrosion Resistance Improvement by Dipping to Inhibitor Solution of Galvanizing SteelPreparation, Characterization and Thermal Behavior of Copper(II) Complex with 1-(6-Hydroxynaphthalen-2-Yl)butane-1,3-DionePreparation and Characterization of Konjac Glucomannan GelOxidation Behavior in Super-Plastic Microforming of Zr65Cu17.5Ni10Al7.5 Bulk Metallic GlassThe Thickness Testing Technology of the Metal Base and Anticorrosion for Double Coating Corrugated Sheet Steel Beams for GuardrailThe Relationship between the Free and the Bound Chloride in High Performance ConcreteStudy on Strength Reduction Method Based on Hinge Joint Concrete Block Slope StabilityDescription of Planer Anisotropy and Cyclic Plasticity Behavior of Aluminum Sheet Based on Crystal Plasticity TheoryA Study of Polyvinyl Chloride Modified by Barium SulfateEffect of K / Na on Primary Boride of Hypereutectic High-Boron AlloyPreparation and Evaluation of Fe2O3/Ceramic Composites for Flue Gas DesulfurizationPreliminary Study on High Efficiency Deinking Agent of ONPA Contrastive Study between Chinese Traditional and Western Classical Column within Style DecorationStudy of Selecting Proper Chitosan from Various Chitosan Sample as Paper Strengthening AgentStudy on the Effect of Surface Coating on Thermal Manikin's RepeatabilityDrug Release Behavior from a pH/Temperature Sensitive Hydrogel of Poly(N-Acryloylglycine) and ChitosanSynthesis and Characterization of Thermoplastic Biomaterial Based on Acylated Chitosan OligosaccharideResearch on Application of Phosphorus Slag in CementEfficient Adsorption of NH4+ Ions on Modified Fly Ash/EPDM Environmentally Friendly CompositeMicrostructure and Mechanical Properties of Mg-9Al-6.5Ca-3Zn-0.6Mn-XNd Alloys Prepared by Spray FormingStudy on Processing Technology for Mold Cavity PartsADAMS-Based Braking System of a Tracked Vehicle to Optimize Mechanical Linkage DesignGravity Anomaly Computed by GOCE Data in Northeastern Margin of Tibetan PlateauInvestigation of Cutting Model in Machining of Al/SiCp Metal Matrix CompositePhysical Simulation of Grooved Axis Warm Surface RollingSlope Instability Risk Analysis in Earth Dams Considering Uncertain FactorsResearch on Technological Mineralogy of Refractory Hematite OreExperimental Investigation on Surface Integrity in Grinding Titanium Alloys with Small Vitrified CBN WheelMicroscopic Mechanism Research of T10 Steel Accumulated Plastic Deformation in Low Stress LoadComparative Analysis of Automotive Interior Trim Materials Based on MoldflowPrediction of Edgewise Compressive and Side Tensile Elastic Modulus of Core Materials of Ripple Structure Sandwich CompositesStudy on Machining Dental Implants by Whirling ApproachAnalysis and Simulation on the Connection Strength of Flareless Tube FittingsMicroencapsulation of Cajuput Oil by Spray Drying: Influence of Wall Systems on the Oil Retention and StorageEffect of Solidification Pressure on Secondary Dendrite Arm Spacing of Aluminum AlloyStudy on State Recognition of ASCE Benchmark FEM Based on Lyapunov Exponent Spectrum EntropyFloating Grains in the HDC Casting 7075 Aluminum Alloy IngotFinite Element Analysis and Topology Optimization of the Clamping Unit in a Two-Platen Injection MachineStatic Analysis of Curved Beams with Clamped-Clamped Ends under Thermo LoadStudy on the Influence Factors of Real Estate Price Based on Regression Model ? The Case of Jilin CityReview of Research on Special Load and Vibration Behavior of Shaft Tower StructureExperimental Study on Dynamic Modulus Master Curve of ATPB MixtureOptimization of Cutting Parameters on Turning Process Based on Surface Roughness Using Response Surface MethodologyThe Deformation Simulation of the Laser-MIG Hybrid Welding in Fillet-Welded JointThe Recrystallization Simulation of H-Beam Rolling ProcessChecking Gypsum as Structural MaterialDesign and Optimization of the Deposition Baffle Shape for Magnetron SputteringDesign of Parking Control Systems Based on Wireless Sensor NetworkInfluence of Surface Treatments on Fretting Fatigue Life Prediction in TA15Effects of Enzymatic Modification of Masson Pine Mechanical Pulp on Fiber Morphology and Pulp PropertiesCTOD Testing and Evaluation for Weld Joint for Heavy Thickness Offshore Structure Steel S355G10+NBurr Minimization in Shaping of Aluminium Alloy-Through Experimental and Stress Analysis ApproachResearch on Modification of Bentonite and its Printing Quality when Used in Color Ink-Jet PaperAnalysis on the Distribution Law of WC Particles during Centrifugal Casting ProcessThe Surface Roughness Modeling on Turn-Milling Process and Analysis of Influencing FactorsFinite Element Analysis of Materials Flow Behavior in Friction Stir Welding of 7075 Aluminum Alloy PlateResearch on Design for Comforts of Modern ResidenceFinite Element Analysis and Experimental Study on Rubber Waveform GeneratorNumerical Simulation Temperature Field of Laser Cladding Titanium AlloyResearch on Slope Deformation Regularity of the Badong Formation in the Three-Gorges Reservoir AreaPrecision Forming and Die Design for Octahedral Shell of Static StentsA New Nitriding Process of 4Cr5MoSiV1 for Extrusion DieNumerical Simulation of the Cold Expansion and Residual Stress Relaxation for Aluminum Alloy 7050Microstructure of Flame-Spray Welded Ni-Based Alloy Coating and Base MetalInvestigation of the Effect of Heating-Lines on Tensional Mechanical Properties of Sheet Metal after Laser FormingCDM Model and its Application to Numerical Simulation on Rotating Band?s Engraving ProcessResearch on Fire Performance of a Profiled Light Aggregate Concrete Composite FloorIdentification of Subsurface Deformation in Machining of Inconel 718Superplastic Behavior and Constitutive Equation of AZ31B Magnesium AlloyEffect of Underlay Rigidity on Breaking Behavior of Aluminum Sheet during Wedged Shearing ProcessA New Porous Mullite Nozzle for Refining Molten AluminumInfluence of Cooling Rate on the Microstructures and Properties of Q550Milling Parameters Optimization by Grey Relation TheoryStudy on Simulation of Dispersing Uniformity of Aluminum Alloy Melt in Rheo-Casting MoldInfluence of Friction on Metal Flow Behaviour and Die Stress of Backward ExtrusionNumerical Study on the Relationship of the Axis Orientation of Deeply Buried Circular Tunnel and the Direction of Horizontal In Situ StressThe Force Theoretical Analysis and Experiment for Wire Saw with UVM Cutting SiC MonocrystalStudy on Registering Accuracy and Precision in Test of Printing PressNumerical Simulation on the Microstructure of Small Electroslag Remelting IngotThe Experiment of CO2 Pollution and Treating in Silicate-Based Drilling FluidsStudy on Borehole Stability in Haita BasinExperimental Study on Frost Resistance of the Shale Ceramsite ConcreteA Novel Approach in Improving I/O Performance of Small Meteorological Files on HDFSInfluence of Microstructure of TC4 Titanium Alloy on Ultrasonic Velocity and AttenuationCritical Strain Model of Cr4 Steel for Heavy Supporting RollerThe Boundary Element Method to Solve the 2D Elastic Stress and Displacement ProblemThe Study on Harmonic Characteristics of Three-Phase SPWM InverterEnergy Consumption Analysis of Cooling System in Jiahe Deep Coal MineStudy on Determination of Friction Model at the Tool-Chip Interface of Titanium Alloy Ti6Al4V Based on Orthogonal CuttingEffect of Cold Reduction Ratio and Annealing Temperature on Microstructure and Mechanical Property of Added Phosphorus High Strength Nb-IF SteelThe Mathematical Model of Online Quenching for Extruding Bar of 6061 Aluminum AlloyStudy on a Model for Perceived Text Definition of Multi-Stroke Chinese CharacterStudy on the Influence of Deforming Velocity on Steel Ball Quality Based on DEFORMAn Airflow Field Finite Element Analysis of the Seed Adsorption Hole of Pneumatic SeederStudy on Corrosion Resistance of High-Entropy Alloys NiCoCrFeMnCuC in Medium Acid LiquidThe Influences of Interface Properties Weakening on Bearing Behavior of Pile FoundationMulti-Feature Fusion Based Object Detecting and TrackingHydrodynamics of Oil Palm Frond in a Swirling Fluidized Bed DryerEffect of Initial Particle Size on Coarsening Kinetics of ? Prime Precipitate in Nickel-Based Superalloy - A Phase Field StudyA New Method to Accurately Describe Cross-Section Distortion in Rotary Draw Bending Process of Thin-Walled Rectangular TubeAn Experimental Study on Electric Hot Milling for T10A Tool SteelThe Analysis on Structure of U-Shaped Compartment Based on Soil Mechanics PrincipleStudy on a Method for Vibration Control of the Aeronautic Thin-Walled Workpiece in High-Speed Milling ProcessStudy of Post-Fire Behavior of a Profiled Sheet-Ceramsite Concrete Composite FloorNumerical Simulation on Back-Extrusion Loadcase of Magnesium Alloy WheelAnalysis of the Relationship between CTOD Toughness and Micromechanism of Marine Steel Weld JointsExperimental Study on the Effect of CGHAZ Microstructure on CTOD of High-Strength Steel EQ56Neural Network Based Toughness Prediction in CGHAZ of Low-Alloy Steel Produced by Temper Bead WeldingA Study of Fuzzy Neural Networks Control for the Quality of Resistance Spot WeldingInterface Microstructure and Weld Strength of Steel/Aluminum Alloy Joints by Resistance Spot WeldingEffect of Activating Flux and Welding Parameters on Performance of Aluminum Alloy Weldment in GTA Welding ProcessEffect of Microstructure on CTOD of Welded Joints for Offshore High-Strength Steel
