Buch, Englisch, 510 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1100 g
ISBN: 978-3-03785-299-6
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preface and Committee
Chapter 1: Advanced Structure, Construction Materials and Dynamic Engineering
Thermal Conductivity Test and Coupling Simulation of Heat-Transfer in Fracture Rock
Seismology Based Ground Motion Attenuation Relationship for Sendai Area
Simulation and Analysis of Cooling Load about Building Construction
Real-Time GPU-Based Visualization of Dynamic Terrain in Excavator Simulator
Research of NOx Emissions Characteristic of Engine Fuelled with M40
High-Quality Polysilicon Thin Film Recrystallization by Laser Annealing
Research of Product Design in Physically Processed Type Based on Bamboo Composite Characteristics
An Improved Risk Analysis Method of Advanced Materials
Color Design Plan in the Significance of Product Design
The Research about the Application of the Integration of Reverse Engineering and Rapid Prototyping Technology
Experimental Study on Polycarboxylate High-Performance Superplasticizer Use in Tunnel Segment
Analysis on Fluid-Structure Interaction Dynamic Characteristics of Steam Generator Heat Exchanger Tubes
The Integrated Evaluation Index of Energy-Saving and Emission Reduction Generation Dispatching
DFA Based Predictability Indices Analysis of Climatic Dynamics in Beijing Area, China
Infrared Emissivity of Capacitive Frequency-Selective Surfaces and its Application in Radar and IR Compatible Stealth Sandwich Structures
A Heuristic Calculation Method for Concrete Building Construction Cost Base on Structural and Material Characteristics
Analysis Methods on Life Cycle Reliable Performance Index of Construction Engineering Structure
Dynamic Response Characteristics of Underground Powerhouse Caverns for Sandaowan Hydropower Station
Boundary Effect to the Safety Factor of Slope in Geo-Material
The Study and Simulation of the Fabric Defects Images Restoration
Mix-P2P Architecture of Distributed Storage System Based on HDFS
The Design of Mining Equipment Operating Status Monitoring System
Design and Simulation of a-Si:H/nc-Si:H Tandem Solar Cells
Supply Chain Scheduling with Transportation Cost on a Single Machine
Scheduling Problem for Parallel Machines with Limited Processing Capacities
Intelligent Control in Gas Supply System for Power Generation with Low Concentration Gas
Planar Frieze and Crystallographic Patterns with a Polar Spin from Dynamics
Experimental Investigation of Oil Removal from a Cylindrical Chamber
Dynamics Simulation for Horizontal-Axis Wind Turbines
Standard Uncertainty of Rolling Bearing Vibration as Time Series
Performance Research of Resistance Materials of Low Resistance Grounding Resistor under the Short-Circuit State
Design of LCD Image Display Based on BF561 Platform
Research on Mono-Base Multi-Electrode Quartz Crystal Resonator Dimension Structure and Simulation Analysis by ANSYS
Stress Distribution of Thin Circular Quartz Plate with the Radial Force
Stress-Frequency Character of AT-Cut Thin Circular Multi-Electrode Quartz Resonators
Chapter 2: Design of Machine, Mechanics and Dynamic System
Research on Character of Integrated Quartz Crystal Resonators
Motor Broken-Bar Fault Diagnosis Based on Park Vector and Wavelet Neural Network
Poor Information Analysis of Rolling Bearing Friction Torque Characteristic Parameter Based on Phase Space
Influence of Water Contents on Shear Strength of Rammed Earth Wall of Earth-Building
Analysis of Wind Load Effect on the Roof of Low-Rise Building in the Mountain Terrain
Design of Precise DC Millivolt Signal Source Based on System-on-Chip of C8051F410
Design of Pt100 Temperature Measuring System Based on System-on-Chip for C8051F410
Fabrication and Morphology of KOH Etching Single Crystalline Silicon Solar Cells
Analysis of Rod Length Change in the Rapier Weft Insertion Mechanism Transmitted by Spatial Four Bars
Analysis of the Influence of Long Curing Age on the Compressive Strength of Plastic Concrete
Estimation of Eddy-Current Loss for MnZn Ferrite Cores
Research on On-Line High-Voltage Switch Contact Temperature Rise Monitoring System Based on WSN
Cold Regions of the Roof on the Building Energy Consumption Impact
The Modification Method of the Matlab Built-in Function PSD Using in the Field of Random Vibration
Finite Element Analysis of the Valve Spring with Different Engine Speed
Enhanced Field Emission Studies of Carbon Nanotube Emitters with Cross-Like Cathode Electrode for the FED Panel
A Building System Called RC Grid Framed-Tube with Gypsum Wall
The Control System Research of Reheated Steam Temperature State Variables Based on the Mechanism Analysis of Dynamic Characteristic
MD-ISE-FE Multiscale Modeling and Numerical Simulation of Thermal Conductivity of Cu Film Interface Structure
Deformation Analysis of Damage Region on Dynamic Spherical Cavity Expansion Problem
Parameter Optimization of Kanban Production System for an Engine Assembly Workshop Based on Witness
Cracking Risk Appraisal of High Performance Recycled Pavement Concrete and its Application
Dynamic Rheology and Thermal Stability of PTT/POE-g-MAH Blends
Rheology, Phase Morphology and Crystallization Properties of PA6/PP-g-MAH/POE Blends
Melting, Crystallization and Dynamic Mechanical Properties of PTT/POE-g-MAH Blends
Thermal Decomposition of Wood Treated with K2CO3 and Melamine Modified Phenolic Resin by Thermogravimetry–Mass Spectrometry
Effect of Cold Energy Storage of Multi-Wells Aquifer Thermal Energy Storage in Sanhejian Coal Mine
Support Vector Machine and its Predicting Stability of Partially Stabilized Zirconia by Microwave Heating Preparation
An Investigation into the Static Mechanical Behaviors of Special-Shaped Arch Bridge
New Measurement Method of Concrete Pavement Surface Macro-Texture
Electropolymerization of a Pyrrole Film in Supercritical CO2/BMIMPF6 Biphase System
Molecularly Imprinted Microspheres for Highly Selective Separation of Diosgenin
Checking Analysis of Lining Structural Strength in Aeolian Sand Tunnel
Effects of Accelerated Aging Period of Time at 180°C on Tensile Strength of 3-Dimension-4-Direction Braided/Epoxy Resin Composites
Research on Grouting Experiment in Aeolian Sand Tunnel
Chapter 3: Energy Application, Material Engineering and Environment
Dynamic Modeling of Surface Subsidence Induced by Underground Mining
The Simulation and Analysis of Groundwater Flow in Rock
Sol-Gel Films Prepared with Pure Alumina Sol by Re-Dissolution on Aluminum Alloy
Influence of Parameters on Alumina Particles Size and Morphology
Calcination Conditions Influencing the Preparation of Porous TiO2 Film Using PEG1000 as Template
Porous TiO2 Films Prepared by Sol-Gel Method Using Different Kinds of Templates
Elastic-Plastic Fractal Damage Constitutive Law for Concrete
Fractal Analysis on Bond-Slip Behavior between Steel Shape and Concrete in SRC on Axial Pull-Out Test
Investigation on Time Series Stiffness Spacing Model for Steel Structural Sound Condition Diagnosis of Tower Cranes
Experimental Research on Compressive Strength-Size Effect of Ceramisite Concrete
A Single Roll Caster for Aluminum Alloy Strip
The Extraction of Main Chemical Compositions in Rumex Root
State and Trends of Test Technology on Hygienic Properties for Leather Shoes
Effect of Hydrothermal Process on Xonotlite Crystal
Effect of pH in Systems on Crystallinity and Morphology of Synthesized Xonotlite Whiskers
Influence of Material Systems on Synthesized Xonotlite Whiskers
A Challenge for Strain Optical Measurement for Bimetal
Effect of Sucrose, Lactose, Glucose, Maltose on Survival of Lactobacillus acidophilus during Freeze-Drying
Research about the Effect of Residual Stress on the Fatigue Life of Cruciform Joint of 16MnR Steel
Resistance to Nitric Acid Corrosion of Latex Modified Sulphoaluminate Cement Mortar
Water Lubricated Bearing Molding Technology Impact on Bearing Bush Material Performance
Study on Material Tracking and Auto Coiling Sequence of the Coilbox
Study on Tracking in Interested Moving Objects
Study on Recovering Iron from Smelting Slag by Carbothermic Reduction
The Microstructure and Adsorption Property of Improved Coal Gangue
Synthesis and Characterization of C-N-Cl-Codoped TiO2 with Enhanced Visible Light Response
Synthesis of Visible-Light-Driven Photocatalyst Ag3PO4 by a Precipitation-Replacement Method
Research the Layered Structure Affect on Seismic Dynamic Response of Rock Slope
The Deformation and Failure Mechanism of the Excavation Damage Soil Slope under the Action of Seismic Load
Effect of Galaeto-Oligosaccharide and Isomalto-Oligosaccharide on Growth of Selected Probiotics
Effect of Fructo-Oligosaccharide, Isomalto-Oligosaccharide, Inulin and Xylo-Oligosaccharide on Survival of B. Bifidum during Freeze-Drying
Numerical Simulation and Analysis of Rock under Hydraulic Fracturing Based on Acoustic Emission Monitoring
Silica Sol-Gel Film on Bright Nickel Plating of Steel A3 Substrate
Analysis on the Sensitivity of Structure in Girder Steel Bridge Deck Pavement
Research on Impact Factor of Simple Composite Box Beam under Vehicle Loads
Novel Geminal Dicationic Ionic Liquid as Stationary Phase for Capillary Gas Chromatography
Effects of Different Exogenous Estradiol Contents on Steroid Hormones, GSI, Survival Rate and Sex Reversal in the Asian Swamp Eel
Effects of Busulfan on Serum Steroid Hormones, GSI, Gonad Development and Sex Reversal in the Asian Swamp Eel (Monoptrus Albus)
