Buch, Englisch, 470 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1100 g
ISBN: 978-3-03785-223-1
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preface and Committee
Chapter 1: Material Engineering and its Application
Study on the Amount of SiO2 on the Thermal Resistance of the Ceramic-Lined Composite Cast Iron Pipe
Research on µ-Stability of Unbounded Time-Varying Delays Neural Networks with Impulsion in Intelligent Materials System
Study on Mechanical Model of Borehole Confining Pressure of Dual-Porosity Considering Seepage
Synthesis of Biodiesel from by-Product of Plant Oil by the Catalysis of Solid Acid in Fixed Bed
Effects of Natural Organic Acids on Growth of Maize and Uptake of Copper and Lead by Maize in Contaminated Soil
Skid Resistance Performance Optimization of Asphalt Pavement on Super Long Continuous Downgrades
Microstructure Characterization of AZ91D Magnesium Alloy Weldment Using Tungsten Inert Arc Welding Method
A Novel Direct Torque Control Scheme for Permanent Magnet Synchronous Motor
Effects of EDTA, EDDS and Oxalic Acid on Catalase and Peroxydase Activities of Soil
Effects on Plant Growth of Material from Hydrothermal Humification Process of Biomass
Experimental Research on Effects of Coal-Fired Derived Mercury Emissions on Human Hair’s Mercury Concentrations
A Study on the Ammonia Removal Mechanisms for the A/O Biological Nitrogen Removal Process with the Enhancement of the Zeolite
Stability of Material from Hydrothermal Humification of Biomass in Soil
Lattice Boltzmann Simulation on Natural Convection Heat Transfer for Phase-Change with Heterogeneously Porous Medium
Synthesis and Fluorescence Properties of New Europium (III) and Terbium (III) Complexes with N-(3-methoxyl–phenyl)ketoacetamide
Adsorption of Neutral Red from Solution by Bio-Chars Produced from Pyrolysis of Wheat Straw
Synthesis, Photoluminescence and Surface Analysis of Bis(salicylicaldehyde-trimethylol amino methane)Zn(II)
Material Properties and Natural Frequency of Stator Core of Large Turbo-Generator
Synthesis and Characterization of Poly(ethylene glycol)-Grafted Expanded Graphite
Removal of Methyl Orange from Aqueous Solution onto Expanded Graphite by Adsorption Process
Synthesis, Characterization and Adsorption Property of Expanded Graphite/Conducting Polymer Composite
Study on the Springback Characteristics of CR340LA Steel during the Typical Auto Part Stamping Process
Ammonium Removal from Aqueous Solutions Using an Ammonium Ion-Exchange Material, the Equilibrium Study
Soil Inorganic Phosphorus Fractions as Affected by Fertilization
Experimental Study on the FBG Sensing Character under Three-Dimensional Uniform Stress Field
Textile Pattern Design Based on Multi-Rules L-System
Application of Long-Range-Corrected Density Functional in Zinc Porphyrin for Dye-Sensitized Solar Cells
Sorption and Desorption of DDTs to Natural Surface Coatings
Efficient Heat Pump Water Heater Regulated by the Superheat of Compress Suction Tube
Vapor Compress Flash: Synthesis and Progress on Seawater Desalination Methods
Influence of Flux on Sintering Property of Imported Hematite Ore
Study on Three-Dimensional Fluorescence Spectra of Oil Concentration in Water
Application of 3-D Fluorescence Spectrum and PARAFAC Method in Petroleum Pollutant Measurement and Identification
Fabrication Study on Rectangular Luminous Layer for Field Emission Display Panel
Fabrication Research on the Panel Packaging for FED with Carbon Nanotube Emitters
Composition and Antimicrobial Activity of the Essential Oil of a Wild Kiwi
Research on Harbor Oily Wastewater Treatment by Fenton Oxidation
Repair of Rabbit Facial Nerve with Amniotic Extracellular Matrix Based on Biological Material
Application of Amniotic Extracellular Matrix Nerve Conduit with Biological Material in the Peripheral Nerve Defect In Vivo
The Source and Control of Nitrate Pollution to Surface and Underground Water
Photocatalytic Decomposition of Methylene Blue Waste Water by Using Pt Nanoparticles Modified TiO2 Film Photocatalysts
Preparation of Nano-TiO2 Modified by Ionic Liquid and its Photocatalytic Activity
Remediation of City River Water by Combining Submerged Macrophyte and Bioenergizer
Dynamic Model of Catalytic Denitrification of Nitrate over Pd-Cu Catalysts from Groundwater
Synthesis of Zirconium Tungstate by Hydrothermal Method
CO Emission Characteristics in a Designed Premixed Burner
Fabrication of Self-Organized TiO2 Nanotubes by Anodization and its Photocatalytic Properties
In Situ Remediation Technology of Groundwater Contaminated by Petroleum Contaminants
Preparation of Biocompatible Micelles as Drug Delivery via RAFT Polymerization
The Process to Recover Soda Ash from Mining Solution in a Pilot Plant
Carbon Black Conductive Composite Based Resistance-Temperature Measurement System Using AT89S51
Applying Computer Aided Design in Composite Molding
Study on the Dose Parameters of 103Pd Radioactive Seed
Comparative Study on Radiated Noise Estimation Error with Sound Pressure and the Pressure Variation
Effect of Bile and Nalidixic Acid on Growth of Selected Probiotics
Study on the Kinetics of Wet Flue Gas Desulfurization by Carbide Slag
Chapter 2: Material Science and Engineering
Selection of Complex Adsobent and Catalytic Absorption NO from Flue Gas
Microstructure and Mechanical Properties of Weld in 980MPa Grade Steel by Ultra-Narrow Gap Welding
Research on Adsorption Material for Organic Solvent Floating on the Water
Edge-PI Index of TUC4C8(S) Nanotubes
The Elasticity of Soybean Protein Fiber Blended Yarn
Relationship between the Tensile Property of the SPF-PVA/Polyester Blended Yarn and the Blended Ratio of SPF-PVA
Study on the Relation between the Properties and the Blended Ratio of Soybean Protein Fiber/Cotton Blended Yarn
Research on the Tensile and Surface Frictional Property of PLA Fibers
Design of Mechanical Vibration Test System Based on Virtual Instrument Technology
Preparing Fatty Acid by Hydrolysing Waste Oil from Restaurants under Normal Pressure
Influences of Doping Mg Ion on Luminescent Properties of Tb Complex Material
Study on Ca (II) Ion Quenching Luminescent Emission of Tb Complex Material
Test and Analysis of Shengma Pure Yarn and Shengma/Modal Blended Yarn Mechanical Property
Improvement and Fabrication of Anode Pixel for FED Panel with Cold Cathode Emitters
Synthesis, Spectral and Luminescence Properties of Complexes Europium with N-benzenesulphonyl-L-phenylalanine and 1,10-Phenanthroline
Model and Simulation of Reheater Based on Thermal System Dynamics
Dynamic Transmission Experiment Research of Underground Heat Storage
Synthesis and Luminescent Properties of Magnesium Complex with Schiff-Base Ligands
Synthesis, Spectral Characterization and Luminescent Properties of Ternary Rare Earth Nitrates Complexes with 2-Acetylpyridine-tris(2-aminoethyl)amine and Pyridine-N-oxide Ligand
Synthesis and Luminescent Properties of Two Zn (II) Complexes with Schiff-Base Ligand
The Effect of 1,10-Phenanthroline on the Luminescent Properties of Eu (III) and Tb (III) Complexes with 2-Acetylnaphthol-Hydrazinehydrate
Numerical Study of Laminar Flow and Heat Transfer Characteristic in Wave Tubes Based on Sine Curve
A Numerical Simulation of Diffusion Experiment in Clay
Grid Operation and Maintenance Station Locating with Electricity Materials Based on Improved k-Means Algorithm
Effect of Eutectic Reaction Induced by Pr on Microstructure in Semisolid A356 Alloy
Preparation and Characterization of Two New Luminescent Material
Preparation and Structural Characterization of Chain Ni (II) Coordination Polymer Material
The Development and Property Studies of Nonwoven Filtering Materials for Car Air-Conditioner
The Physical Properties of Ultra-Short Leather Fiber Extracted from Chromed Leather Waste and its Use in Textile Industry
Study on the Prediction Model and Software of Heavy Metals Pollutant in Coal-Burning Power Plants
Study on the Novel Label Free Impedimetric Immunosensor for Aflatoxin B1 Based on Poly(o-phenylenediamine) Film Modified Gold Electrode
Friction Material Optimization Design for the Traveling Wave Ultrasonic Motor with Stator Contact Layer
Compatibilization Effect of Polyfunctional Monomers on PP/TPU Blends
Discussing on Biochemical Pathway of Anaerobic Fermentation for Hydrogen and Methane Producition by Eupatorium Adenophorum Spreng Based on Biochemical Materials
Tribological Properties of Ekonol Composites Friction Material in Traveling Ware Ultrasonic Motor
Synthesis, Infrared Spectrum and Luminescent Characterization of Zn (II) Complex Materials
Infrared and Luminescent Properties of Mg (II) Fluorescence Materials
The Research on Infrared and Luminescent Spectra of a New Mg (II) Luminescent Materials
Synthesis and Characterization of 1-Acetyl-2-Naphthol-4, 4’-Diaminodiphenylsulfone Cd (II) Complex Material
The Laboratorial Research on Ultimate Stress of Material
Optimization, Characterization and Kinetic Model of Electroless Ni-P Deposition on Quartz Optical Fiber Surface
Preparation and Thermodynamics of Nickel-Phosphor Deposition on Surface of Quartz Optical Fiber by Electroless Plating
Equilibrium and Kinetic Studies of Copper Metal Ion Biosorption by Flavobacterium sp. as a Low-Cost Natural Biosorbent
Biosorption Applications of Flavobacterium sp. Biomass for Decolorization of Soluble Reactive Light-Yellow K-4G Solutions
Mechanical Properties of the Knitted Fabric of SPF/Modal Blended Yarn
