Buch, Englisch, 2650 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 5000 g
Buch, Englisch, 2650 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 5000 g
ISBN: 978-3-03785-507-2
Verlag: Trans Tech Publications
Autoren/Hrsg.
Weitere Infos & Material
Preface, Sponsors and Organizing Committee
Chapter 1: Vibration Engineering
Free Vibration Analysis on Combined Cylindrical-Spherical Shell
New Method in Suppressing Vortex-Induced Vibration of Marine Riser
Flow-Induced Vibration Study of Tunnel Spillway Working Gate on One Reservoir
Simulative Analysis of Structure Vibration of Diesel Engine Based on Finite Element Method
Optimal Design and Test of Ultrasonic Vibration System
Application of the Force Transferring Technique for Marine Machineries
Numerical Analysis for Galloping of Iced Quad Bundle Conductors
Analysis on Tower Crane under Wind Load by ANSYS
Influnce of Support Stiffness on Free Vibration and Force Transmission Rate of Helicopter Driveshaft
Free Vibration of Damaged Beam Structure with a Notch Defect
Elimination of Support Effects in Modal Testing
Research on Numerical Simulation Method for 3D Complex Flow in Rotating Machinery
Analysis on Oil Whip of Steam Turbine
Modal Identification Method Based on Natural Pulsation Excitation
Group Delay in Digital Filter Induced Instability of a Two-Dimensional Airfoil Active Flutter Suppression System
Study on Calculation Method of Dynamic Response of Structure Subjected to Harmonic Load
Vibration Characteristics of Single Pile Embedded in Nearly Saturated Soils Half Space Subjected to Harmonic Vertical Loads
Vibration Suppression of a Saturation Control System Using Delayed Feedback Control
Real-Time Calculation of Noise Radiated by Ship Structure via Machinery Exciting Force Estimation
Vibration and Modal Analysis of Induction Motor
The Bionic Vibration Damping Technology and its Inspiration for the High Speed Milling Cutter
The Vibration Response Analysis about High-Speed Train’s Braking Wing
A Research on the Influence of Vessel-Propeller Coupling Effect to Shaft’s Lateral Vibration
Study of Vibration Characteristics of Cantilever Rectangular Plate with Side Crack
Vibration Analysis of the Load on Helicopter Swashplate Rod
The Effect of Group Number and Group Coupling Stiffness on Vibration Response Localization in Tuned Grouped Blade-Disk
Evolution of Constrained Layer Damping Using a Modified Cellular Automata Algorithm
Microvibration Model Development and Validation of a Cantilevered Reaction Wheel Assembly
The Rapid Series Method for Solving Differential Equation of the Odd Power Oscillator
Study on the Free Vibration of Odd Power Oscillators
Numerical Simulation of the Damping Influence on Vortex-Induced Vibration
Transverse Vibration of Axially Accelerating Moving Fabric: Experiment and Analysis
Modal Analysis of a Flexible Beam Attaching Multiple Absorbers
Galloping Characteristics of Conductor Accreted with Crescent-Shaped Ice
Sensitivity Analysis of 1000MW USC Units Shafting Torsional Vibration Based on ANSYS
On Orifice Design for Reducing Self-Excited Vibration of Aerostatic Guideway
Vibration Propagation Characteristics of Binary Periodic Sandwich Panels
Experimental Study and Numerical Analysis of Sihui Metro Depot and the Superstructure
Investigating Nonlinear Vibration of a Fully Clamped Nanobeam in Presence of the van der Waals Attraction
Study on Impact of Vibration Direction on Linear Vibration Screening Effect
Vibration Localization in a Fluid-Loaded Rectangular Plate with Rib Irregularity
Analysis and Experiment of an Air Vibration Isolation System with Auxiliary Chambers
The Design and Dynamic Analysis of High Frequency Ultrasonic Transducer for Wire Bonding Application
Sound Transmission Control of a Cylindrical Structure Using Acoustic Resonators
Application of Balanced Multi-Wavelet in the Fault Diagnosis of Rolling Bearing
Effect of Mesh Size on Structure Vibration and Acoustic Radiation
Study on Nonlinear Vibration of Motor Rotor System
Research on Ash Removal for the Water Wall of Coal Gasifier under Impact Loadings
Influence of Radial Slots on the Vibration Characteristics of Circular Saw Blade
Threshold Noise Reduction Research of Improved EEMD Method
The Contrast Experimental Study on Operational Modal Analysis of Ship Structural Model
An Experimental Investigation of Sunroof Buffeting Characteristics of a Sedan
Active Vibration Control of a Double-Decker Cantilever Beam Using Shape Memory Alloy
FEM Modeling Technology and Vibration Analysis of Flexible Rotor System
Traveling Wave Vibration of Rotating Thin Circular Cylindrical Shell
Application of Support Vector Machine in the Vibration Signal Measuring-Channel Modeling
The Modal Analysis and Modeling Study of the Spacecraft Payload Load-Bearing Floor Structure
Crucial Torsional Modal Identify on Drive-Train in a Wind Turbine
Modal Analysis and Optimization of Spindle Box of Turn-Milling Center Based on Finite Element Method
Experimental Study on Vibrational Transmission Characteristics of a Ring-Stiffened Cylindrical Shell Model
The Modal Analysis of the Rotor of Electric Eddy Current Dynamometer Based on ADAMS
The Design and Prestressed Modal Analysis for Megawatt-Class Wind Turbine Rotor
Finite Element Modeling and Modal Analysis of Coilable Mast
Modal Identification Based on Hilbert Transform for Time-Varying System
Research on Vibration Control of High-Speed Press Frame Structure
A Detection Technology for Weak Vibration Signal Based on Independent Component Analysis
Reconstruction of Sound Field Based on Mono-Poles Array Modes
Study on the Mechanism of Vibration Reduction by Variable Speed Cutting
Study on Ambulance Stretcher Vibration Isolation System
Optimized Fuzzy Neural Networks Control of a Magnetic Suspension Vibration Isolation System
Selection of Optimistic Wavelet Base in Running-In Vibration Signal Denoising of Remanufacturing Engine
Research on Condition Monitoring of Bearing Health Using Vibration Data
Vibration Modeling and Sensitivity Analysis of Printed Circuit Board
Natural Vibration Period Analysis of Multi-Storey Reinforced Concrete Frame Structure
Wind-Induced Vibration Analysis of Wind Fence Structure
Influence of Rib Strengthening on Structure Vibration and Sound Radiation of Cylindrical Shell
Monorail Truss Structure Selection Based on Modal Analysis
The Effects of the Jet-Flow on Sound Propagation in Low-Speed Wind Tunnel
Excitation Source Function of Ground Vibration from Urban Railway Traffic by an Inversion Procedure
Analysis on Vibrations due to High-Speed Railway Tunnel and Control Measures
The Characteristic Analysis of Vibration for High-Speed Train-Ballastless Track-Bridge System Base on A Hybrid FE-SEA Method
An Explanation on Mechanism of Local Amplification in Attenuation of Ground Vibration from Rail Traffic in Urban Area
Technology and Application for Modal Testing of Cable-Stayed Bridge
Numerical Simulation of the Vibration and Structure-Borne Noise of the Viaduct
Analysis on Vibration Reduction Characteristics of Ladder Track Structure on Metro Viaduct under Measured Track Irregularities
Simulation and Analysis for Environment Vibration Induced by Urban Rail Transit with Ground Line
Comparative Study on Aerodynamic Noise of Dimensionally Similar Locomotive Models of High Speed Trains
Application of Dynamic Vibration Absorber in Noise Control of Whole Vehicle
Noise Decreasing Methods of Gearing Vibration for a Idling Construction Machine
Experimental Modal Analysis of Vehicle Body in White
Thickness Optimization Study of Constrained Damping Plate
Research on Vibration Angle of Six Degree-of-Freedom
The Study of Sound Quality for Car Compressor
Chapter 2: Dynamics of Mechanisms and Systems
Dynamics of A Single Elastic Bodies under Large Rigid Rotation
An Experimental Study on the Effect of Submergence on a Vertically Oscillating Hydrofoil at Zero Translational Velocity
Discussion on Commonly Methods for Analysis of Drill String Acoustic Spectral Characteristics
Numerical Simulation Method of Acoustic Wave Propagation Based on Semi-Symplectic Theory
Dynamics of the Oscillative Solution for a Non-Linear Ecosystem with Impulsive Perturbation
Fluid-Structure Interaction Analysis of Flexible Marine Propellers
Analysis of Bearing Loads for Scroll Compressor Considering Phase-Angled Counterweights
The Research of Cylindrical Noise Source Distribution Using Near-Field High-Resolution Location Methods Based on MVDR Algorithm
The Near-Field Correction Method of the Basic Array Error Based on a Single Auxiliary Vector Hydrophone
Aeroelastic-Acoustics Numerical Simulation Research
Complex Dynamics in the Kummer-Olsen Model of Calcium Oscillations
Hopf Bifurcation and Numerical Simulation in a Calcium Oscillation Model
Analysis of Attitude and Dynamics Characteristic of a Kind of Submerged Buoy
Dynamical Analysis of a Calcium Oscillation Model in Non-Excitable Cells
Simulation Research on Defects Detection in Straight Pipes Using Guided Waves
Bifurcation Induced by Mass Variation in Piecewise Linear System
Simulation on Shock Wave Propagation in Metallic Foams Subjected to Impact Loading
Nonlinear Dynamics of Simple-Supported Beam under Concentrated Moving Load
Dynamic Testing and Analysis of Inflatable Beams
Prediction of Wave Attenuation across Multiple Joints with an Improved Elastic Nonlinear Model
An Improved Mixed-Radix FFT Technique and its Application in Frequency Spectral Analysis
Chirp Signal Time-Frequency Analysis Characteristic Comparison
Fault Diagnosis of Grinding Machine Using Choi-Williams Distribution Based on COM Module Technology
Analysis of Orbiting Scroll Overturning for Scroll Compressor
The Frequency Veering Phenomena of the Beams of Cantilever Screen
Research on Semi-Active Suspension System with Variable Stiffness and Damping
Dynamic Modeling for a Thin Plate with Large Deformation
The Study of Reliability in MDO of Aircraft
Dynamical Sensitivity Analysis on Blades in Turbine Machines
Simulation Modeling of Ball Screw Feed Drive System Based on MRAS
The Research of Strain Rate of Common Bolt Materials
Analysis on Static Characteristic of HTC100 NC Lathe Bed
A Study on Dynamic Performance of Deviation-Based Sliding-Door in Closed State
Research on Fatigue Life Prediction of Gear Box in Caterpillar Based on Running Simulation Test
The Dynamic Analysis of High-Speed Cam with Considering Damping
NN-PID Adaptive Control for 6_PUS Parallel Mechanism
A Dynamic Analysis of Reciprocating Compressor Transmission Mechanism with Joint Clearance
Identification of Quadratic Volterra System Using Random Multi-Tone Excitation
The Rotor Dynamic Analysis and Optimization in Turbocharger
The Assessment on the Accuracy of Chart Datum Transfer Algorithm
Modeling and Simulation of Hydraulic Turnover Device for Large Bearing House
Dynamic Analysis of the Rotor System with a Semi-Elliptical Fronted Crack on the Shaft
The Performance Analysis of Vertical Automatic Tool Changer System
Investigation of Human Masticatory Movements Using ADAMS and MATLAB/SIMULINK
Study on the Time Lag between Steering Input and Vehicle Lateral Acceleration Response under Different Key Vehicle Parameters
Impact Dynamics of Multi-Link Robots with Link and Joint Flexibility
A Linear Stepping Piezoelectric Motor Using Inertial Impact Driving
The Discretization Methods of a Rotating Flexible Cantilever Beam
A Hybrid Finite Element-Analytical Approach for Dynamic Analysis of a Micro-Resonator Driven by Electrostatic Combs
Analysis on Axial Displacements of an Engine Main Shaft in Complex Temperature Environments
Dynamic Performance Test and Analysis of Spindle System of High Speed Grinding Machine Tools
Anti-Noise Simulation of the Hysteresis Mathematic Model Using Computationally-Efficient GA
Variable Weight Fuzzy Comprehensive Evaluation Method for Health Condition of Warship Electromechnical Device
Study on System for Monitoring Mine Belt Conveyor Fire
Aeroengine Rub-Impact Fault Diagnosis Based on Wavelet Packet Transform and the Local Discriminate Bases
An Automaton Fault Diagnosis Based on Shock Response Analysis
Fault Diagnosis of Railway Axlebox Bearing Based on Wavelet Packet and Neural Network
Fault Feature Extraction Method of Large Rotating Machinery
Blind Extraction of Correlated Fault Sources Based on Constrained Non-Negative Matrix Factorization
Compound Fault Feature Separation of Rolling Bearing Based on Complex Wavelet and Energy Operator Demodulation
The Current Situation and Recent Advances of Deep-Water Floating Wind Turbine
Analysis of Underwater Projectile Experiment Using One Stage Light Gas Gun and Numerical Simulation
Mechanical Analysis on Destruction of Coal Cutters Guide Shoes
A Dynamic Optimization Design Method for the Turbine Engine Frame Foundation
Time-Accurate Simulation of Longitudinal Flight Mechanics with Control by CFD/RBD Coupling
Analysis and Simulation of Two Hinged Ends Micro-Beam Relaxation Process
The Comparison of Two Processing Methods of Sliding Bearing in Impact Dynamics Analysis of Finite Element Software
Effect of Service Speed on Dynamic Response of Heavy-Load Depressed Center Flat
Optimization of Refrigerator Door Structure Based on ABAQUS
Analysis of CFD for Design Method of Swirl Atomizer
Rotary Kiln Drive System of Kinematics Modeling Analysis Based on ADAMS
On the Basis of Double Fuzzy Control of Honing Machine Reciprocating Motion
Numerical Simulation of Natural Cavitating Flow over Axisymmetric Bodies
Prediction of Nonlinear Contact Force of Piston Skirt and Cylinder Liner under the Function of Clap Force
Reduced-Order Model for Unsteady Compressible Flow Based on POD-Galerkin Projection
Fast Terminal Fuzzy Sliding Mode Control for a Three-Links Spatial Robot
CPG-Based Movement Control for Bionic Flapping-Wing Mechanism
Fatigue Strength Analysis of the Actuator for the Steering Gear Based on DFR
Research on the Damage of Warship Structure Subjected to Mixed Explosion Load
Research on Fatigue Life Prediction of Planetary Cage in Caterpillar Base on Running Simulation Test
Study on the Effect of Dynamic Wheel-Rail Contact Geometry Relationship in Turnout Region by the Track-Distance Roughness
Analysis of Influence Factors of Switching Force and Inadequate Displacement of Switch Rail of NO.9 Turnout
Dynamic Property Analysis of Rubber Absorber in Rail Fastenings of Different Force Condition
Chapter 3: Geotechnical and Structural Engineering
Rehabilitation of Strength of Steel Plate with a Corroding Hole Bonded by Composite Patches
Lessons Learnt from Seismic Damage Induced by the 2008 Wenchuan Earthquake
Seismic Risk Assessment of Structures Using Multiple Stripe Analysis
Influence Analysis of Layout of Braces on Structural Dynamic Properties of Large Space Multi-Storey Buildings
Analysis of Influence of Material Damping on the Dynamic Response of Concrete-Filled Square Steel Tubular Columns
Tunnel Surrounding Rock Classification Forecast Based on the Geological Advanced Prediction System in Seismic Area
Influence of Transition Layer Position on Seismic Performance in Multi-Story Buildings of SRC-S Vertical Hybrid Structures
Damage Detection of Concrete Structure Based on Approximate Entropy
Study on Earthquake Resistant Performance of a Large Span Structure Strengthened with HADAS
Dynamic Reliability Analysis on Arch Dam by Considering Random Elastic Modulus
Effect of Crack-Depth Ratio on Double-K Fracture Parameter of Reinforced Concrete
Design Guidelines on the Ultimate Strength of Retrofitted Deep Concrete Coupling Beams by Laterally Restrained Side Plates
Experimental Study on Seismic Performance of Non-Dispersible Underwater Concrete Short Columns
Seismic Fragility Analysis of Reinforced Concrete Frames Based on the Service Age Variation
Improvements on Technologies of Shield Tunnel Construction in Sandy Soil
Experimental Study on Bending Behavior of the Wood Beams in Historic Building with CFRP Sheets
Seismic Behavior of Super High-Rise Frame-Core Wall Structure
Studies on Aseismatic Performance of a Typical Subway Tunnel with Initial Defects Caused by Construction of New Down-Through Tunnels
The Corrosion of Concrete Shaft Lining of Mine and its Related Research Progress
Nonlinear Finite Element Analysis of the Temperature Field of Special-Shaped Concrete-Filled Steel Tubular Column under Standard Fire Condition
Blasting Demolition Technology and Vibration Testing of 210m Reinforced Concrete Chimney
Material Strain Analysis of CFRP Reinforced RC Columns Subjected to Combined Action of Force by Finite Element Method
A Fatigue Analysis Method Research for Main Frame of the Large-Scale Wind Turbine
Researches on the Structural Influencing Coefficient of Steel Frames under Different Sites Based on the Energy Concept
Studies on Dynamic Response of Subway Tunnels with Initial Defect under Long-Term Train Loads
Analysis of Strong Ground Motion Caused by Blasting Demolition of a 22-Story RC Building
Study on Strength and Stiffness of Special-Shaped SRC Columns
Numerical Simulation of Pile-Soil Interaction Considering Sand Liquefaction under Earthquake
Tilt Response of Multi-Storey Building of Different Types due to Progressive Collapse of the Adjacent Underground Structure under Internal Blast Loading
Precipitation Characteristics of CaCO3 Scaling on Stainless Steel in Cooling Tower Condition
Numerical Simulation for Progressive Collapse and Protection of a Multi-Storey Building due to an Explosion in its Basement
Numerical Analysis for Progressive Collapse and Protection of Underground Structure under Internal Blast Load
Experimental Study on Shear Behavior of Prestressed Concrete Beams
A Fire Disaster Intelligence Alarm System Applicable to Underground Space
The Marine Derrick Test Tool Design and Optimization
Pushover Analysis of Eccentric High-Rise Single-Tower Building’s Frame-Shear Wall Structure
Analysis of Brick Wall’s Failure Modes under Earthquake Effect
Statistics and Analysis of Typhoons Landing and Failure Mechanism of Coastal Low-Rise Buildings in China
Seismic Damage Evaluation of Recycled Concrete Frame Using Wavelet Transform
Study on Influence of Infilled Wall of RC Frame Structures
The Bottom-Up Underpinning Construction Technology for Base Isolation Reinforcement of the Existing Masonry Structure
A New Method for Dynamic p-y Curves of Pile-Cap Structure in Layered Soil
Deep Well of Coal Roadway Bolt-Cable Mechanism Analysis and its Engineering Application
Discussion of Different Methods of Strengthening Masonry Walls with Constructional Column
Based on the Test of Dynamic Characteristics of the Structure Retrofit Design
Study on Determining Safety-Monitoring Index for Concrete Dam Based on Cloud Model
Application Research of the Dynamic Compaction Method with Precipitation in Foundation Treatment Dredger Fill
Study of Performance Levels of Masonry Buildings Based on Damage
Identification of Nonlinear Parameters of Rubber-Bearing in Base-Isolated Building
Nonlinear Behaviors of Submerged Floating Tunnels under Seismic Excitation
Deflections of Steel Reinforced Concrete Beams Considering the Bond-Slip Effects
Performance-Based Seismic Analysis of Infilled Wall Frames Structure
Seismic Behavior Analysis and Earthquake Damage Prediction of Buildings in Langfang
A Framework of Assessing Remaining Fatigue Life of Aged Crane Structures
Research on Prestressed Concrete Cable-Beam Structure System
Shaking Table Test Study on Mid-Story Isolation Structures with Viscous Damper
Temperature Control Measures Optimization of RCC Gravity Dam
Research Progress of Smart Concrete Structures Reinforced by Shape Memory Alloy
Failure Characteristics of Transmission Towers Subjected to Downbursts
Behavior of New Type of Semi-Rigid Joints under Moment and Tensional Force
The Study on Environmental Evolved Characteristic of Sandy Coast
Statistical Analysis of Fundamental Periods of Frame Structures
Finite Element EMI Model for Cracked Portal Frame and Parameter Study
Stability Analysis of the Radiant Cable Suspendome
Quasi-Static Analysis of Stiffened Plate under Axial Pressure
Component Modeling of Steel Bolted End-Plate Joints under Bending and Shearing Loads
Nonlinear Finite Element Analysis of Steel Frame with Semi-Rigid Connections
Structural Safety Monitoring during Retrofit of Shanghai Expo Puxi Entertainment Hall
Simulation Study on Construction Process of Complex Spatial Steel Structure Based on the Construction Mechanics
A Structural Damage Alarm Index Based on the Statistical Probability of Abnormal Frequency Offset
Reduced Equivalent Static Wind Loads for Tall Buildings with Tuned Liquid Dampers
Tall Building Subsidence Data Regression Analysis Methods and the Final Settlement Value Prediction
Design of Cold-Formed Thin-Walled Steel Fixed-Ended Channels with Complex Edge Stiffeners under Axial Compressive Load by Direct Strength Method
The Research on the Nonlinear Stability of the Steel Spatial Arch Truss with 120m
Effect of Geometric Nonlinear Behaviour of a Guyed Transmission Tower under Downburst Loading
Force Analysis of Ring Gate Based on ANSYS
Numerical Simulation of Wave Overtopping of Breakwater Armored with Porous Layers and Water-Structure Impaction
Numerical Simulation of Mean Wind Pressure on the Roof of Yantai Gymnasium
The Structure Statics Analysis and Optimal Design of Hydraulic Support
Application of Root Pile to Reinforce High Embankment
Experimental Study on the Strength and Deformation Quality of Granite with Effect of High Temperature
The Experiment to Research the Mudstone Interbeds which Affect the Mechanical Characters of the Layered Rock Salt
The Analysis of Dynamic Characteristics for the Powerhouse Structure of the Riverbed-Hydroelectric Station
Affecting Slope Stability Condition of Structure and Engineering Geology Overview in Xiao-Wan Project Region
The Calculation of Landslide-Thrust Based on Reliability Theory
Model and Application on Displacement Calculation of Abutment by Considering Earthquake Effects
Effect of Wetting on the Pullout Resistance of Grouted Soil Nails
The Study of Environmental Characteristic by Coastal Engineering in Rock Coast
Characteristic of Development of the Fractured Zone in Mining under Medium Hard Overburden Using Fully-Mechanized Top-Coal Caving Method
Comparative Study on Landslide Hazard Deformation Forecast Method
Study on Impact of Reservoir Leakage on the Proposed Tunnel Project in Metamorphic Region
Block Element Analysis for Earthquake Response of Joint Rock Slope
Reliability Analysis of Arch Dam Considering Temperature Change Field
Experimental Research on Failure Mode of Micro-Pile in Landslide Reinforcement
Two-Dimensional Numerical Wave Simulation for Port with Submerged Breakwater
Based on Crack the Second Expansion the Variation and Generalized Variation Problem of Fractured Rock Mass under Unloading
Dynamic Response Analysis of Jacket Wharf Structure under Wave
Application of Vacuum Preloading for Soft Foundation Treatment in Grain Storage
The Records of Slope Reinforcement Engineering in a Loess City
Research on the Concrete Dam Damage and Failure Rule under the Action of Fluid-Solid Coupling
Dynamic Response Simulation of SCR in TDZ Considering the Soil Property
Research on Factors Influence of Vegetation Slope Protection Based on Grey Incidence Analysis Theory
Study on Construction Parameters of Cement Deep Mixing Piles
Analysis of the Surrounding Rock's Stability Based on Fuzzy Comprehensive Evaluation Model
The Application of Compaction Sand Pile in the Yellow River-Crossing Project for South-to-North Water Diversion
Study on Deformation-Based Seismic Performance Index of Arch Dams
Seepage-Stability Analysis of a Mine Tailings Dam in Yunnan Province Based on ANSYS
Splitting Criterion of Grouting Bore-Hole Wall and Study on Numerical Simulation of Crack Propagation
Application of Improved Threshold’s Lifting Wavelet to the Analysis of the Dam’s Displacement
Distribution of Lateral Pressure in Large Diameter Squat Silos under Eccentric Discharge
Stability Analysis of Sinkhole Considering Groundwater Level Fluctuation
Damage Identification Research of Cantilever Truss Based on the Principle of Strain Mode
Research on Damage Status of the Reinforced Concrete Ground Floor Columns
Analysis for Eccentrically Loaded of Steel Bolted Group
Analysis on Mirror Lateral Displacement and Steel Frame Connection Strength of Collector
Slope Stability Analysis Based on the Element-Free Galerkin Method
Rocking Response of a Surface-Supported Strip Foundation under a Harmonic Swaying Force
Numerical Simulation on Forming Dynamics Mechanism and Stress State of Qianning Basin
Stability Analysis of Unloading Slope by Interface Element Method
Research on the Selecting Control Sections of Internal Force Envelope by Simulation
Study of Fire Smoke Flow of Tunnel at Different Longitudinal Ventilation
A Study on Micro-Seismic Monitoring of Rock Failure during the Excavation of Tunnel
Fracture Mechanics-Based Fatigue Behavior of Jointed Concrete Pavement
The Numerical Analysis and Field Measurements of the Shield Tunnel Passing through the Pipeline Groups
Tunnel Support Parameters Optimization Based on Micro-Seismic Monitoring
Experiment Study on Air-Deck Divided Decoupling Charge in the Subway Construction
Study on the Method of Construction of Large Section Tunnel Crossing the Ancient Great Wall
Test Study on the Influence of Interface of Soil and Rock on the Stability of Sandy Soil Tunnel Face
Research Advances in the Interaction among Stratum-Ground Fissure-Tunnel under Subway Dynamic Loading
Monitoring of Large Section Tunnel Crossing Qiantang River during Operation Period
Chapter 4: Road and Bridge Engineering
Numerical Analysis on Dynamic Behavior of Damping Fasteners in Rail Transit Viaduct System under Wheel Load Drop
Design and Construction of Locking Steel Pile Cofferdam of South Tower Pile Cap for Taizhou Bridge
Research on the Bridge Safety Monitoring System Based on Wi-Fi Network Technology
Calculating Analysis of Reinforcing Layer Utilization on Stone Arch Bridge Strengthened by Composite Main Arch Circle Method
Studies on Dynamic Characteristics of a Typical Model of Asymmetric Continuous Rigid-Frame Bridge under Different Ratio of Middle Span to Side Span
Field Test and Analysis for the Static and Dynamic Behaviour of Multi-Box Steel Concrete Composite Girder Bridge
Analysis of Seismic Response for an Extradosed Cable-Stayed Curved Bridge Based on Different Design Parameters
Dynamic Response of Vehicle-Bridge Coupled Oscillation Subjected to Velocity-Varied Moving Loads
Evaluation of Strength and Ductility of Thin-Walled Stiffened Box Sectional Steel Bridge Piers Using Fiber Model
Research and Analysis about the Effects of Curved Bar-Tied on Arch Bridge’s Structural Performance
Red Clay Subgrade Settlement Calculation Methods in Ballastless Track Design on High-Speed Railway
Numeric Analysis on Seismic Performance of RC Round-Ended Piers with HRBF500 Steel Bars
Existing Concrete Girder Bridges' Bending Stiffness Assessment Based on Crack Characteristics Parameters
Design Application in Suspender Tensile Force of Tied-Arch Bridges Based on Inversion Optimization Method
Photogrametry-Based 3D Modeling and Measurement for Scale Model of an Arch Bridge
Experimental Study of Stress Corrosion of High-Strength Wires Affected by Four Typical Ions
Study on Model Experiment of Long-Span Steel Truss Arch Bridge
Finite Element Model Updating of Existing T-Girder Bridge by Field Quasi-Static Generalized Influence Line
The Research of Road Profile Estimation Based on Acceleration Measurement
Studies on Mechanical Model of Geometrically Pre-Eccentric Optimization Based on a Small Radius Ramp Curved Bridge with Single Column in City
Application Study of GIS and GPS in Bridge Structural Health Monitoring
Mechanical Mechanism Analysis of Longitudinal Cracks Appeared in a Large Cable-Stayed Bridge Cable Tower
Mitigation of Wind-Rain-Induced Cable Vibration in Cable-Stayed Bridges: Measurement Error
Analysis of Error Control Techniques for the Urban Bridge Cluster Monitoring System
Identification of Loads on Suspenders in Bridges Based on Measured Response Data in Time Domain
A New System for Dynamic Deflection Measurement of Highway Bridge
Comparison and Analysis of Permafrost Railway Subgrade Settlement Deformation Monitoring
Settlement Control and Impact Analysis of the Subway Shield Under-Passing Beijing-Shanghai High Speed Railway Bridge
The Bridge Health Monitoring System Based on SCM
Remote-Controlled Visual Inspection Machine for Bridge Supports
Effect of Eccentric Pounding on Elasto-Plastic Behavior of a Simply Supported Bridge under Transverse Earthquake
Damage Assessment and Repair Design and Implementation for Underpass Bridge Based on Fire Effects
Study on Reliability Evaluation Method of Existing CFST Arch Bridge
Effectiveness Analysis on the Protection Measures for the Mountain Bridge Piers against Rockfall
Damage Identification of Multi-Box Steel-Concrete Composite Bridges Based on Modal Curvature Difference Method
Experimental Study on Seismic Isolation Bearing of Large Aqueduct
Chapter 5: Building Materials
The Application of Thermal Insulation Glazed Hollow Bead Concrete in Tunnel Cooling Structure
Research on the Thermo Physical Properties of Lauric Acid-Capric Acid Binary Mixture Phase Change Materials
The Influence on High-Temperature Mechanical Properties of Hybrid-Fiber-Reinforced High-Performance Concrete and Microscopic Analysis
Analysis on Potential Alkali Reactivity of the Aggregate and its Inhibiting Method in Dam Concrete of a Hydro Project
Experimental Research on Tensile-Shear Behavior of Spot-Welded Lap Joints of Ultra-High Strength Steel
Analysis of Deflections and Stresses for Laminated Composite Plates Based on a New Higher-Order Shear Deformation Theory
Study on Failure Criterion and Yield Criterion of Early-Age C20
Polyamide 6 Microfiber Reinforced Porous Polyurethane Composites
Effect of Ultraviolet and Moisture Aging on the Mechanical Properties of Hemp Fibers Composites
Anlysis on Freeze-Thaw Cycling Damage of Layered Hybrid Fiber Reinforced Concrete
Adsorption of Naphthalene-Based Water Reducer on Alkali-Activated Slag Cement
The Iron Ore Dosage of Cement Base Composite Material Mechanics Effect on the Performance of the Experimental Research
Study on the Dynamic Performance of Asphalt Concrete under Passive Confined Pressure
Experimental Research on Small Diameter Concrete-Filled Steel Tubular by Ultrasonic Detection
Ultimate Flexural Bearing Capacity Research Based on Carbon Fiber Sheet to Reinforce Rough Sleeper Beam
Experimental Study on Mixed-Mode Fracture for Concrete
Experimental Study of the Foam Agent in Lightweight Aggregate Concrete
Numeric Analysis of Size Effect on Mesol Concrete Random Aggregate Model
Experimental Studies on Loads Acting on Two Piles of Side-by-Side Arrangements in the Uniform Flow
Fractal Characteristics of Sandstone Cutting Fracture under Mechanical Shock Loading Conditions
A Comparative Experiment on the Bond-Slip of Reinforced Concrete
Load Stress Analysis on BFRC-RCC Composite Pavement
Chapter 6: Measurement
An Energy-Efficient Cluster Head and Router Selecting Protocol for Wireless Sensor Networks
The Discussion of Acoustic Seabed Sediment Classification Methods
Research on Precision Measurement and Fitting Method for Sliding-Shoe’s Inferior Concave Spherical Surface
The Use of Synthetic Aperture Radar Interferometry to Study Geohazards
Design of New Attitude Measuring Method of Non-Spinning Projectile Based on Magnetic Sensors
Numerical Analysis of Flow Field Characteristics in Three-Z-Shaped Ultrasonic Flowmeter
Research on Fruit State Discrimination Method for Harvesting Robot
The Urban Objects Classification Based on LiDAR 3D
Risk Fuzzy Measurement and Early-Warning of the Project in Material Supply Chain
The Determining Method of Background Light Attenuation Coefficient in Discerning of High Temperature Forgings
Measurement of the Transient Velocity of Nanoparticles in Flowing Nanofluids by Using the Method of Dynamic Laser Speckles
Research on Image Identification of D.Huoshanense with Joint Transform Correlation Using the Electronic-Addressing Spatial Light Modulator
Model-Based GA Evolutionary 3-D Position Measurement Method
A Passive Ranging Algorithm Based on Imaging Detection
FPGA-Based Image Processing System for Target Locating
Air Quality Analysis and Evaluation in Jinan Based on Field Measurement
Design of Three-Phase Multi-Function Energy Meter Based on Measurement Chip RN8302
Development on Filtering Algorithms of Airborne LiDAR Point Clouds
Research on Integrated Diagnosis of Contact and Non-Contact Method for Analog Circuit
Method to Detect Bolting Devices Based on Ultrasonic Guided Wave
The Effect of Abscission of Insulation Lining of Electromagnetic Flowmeter on Output Signal
The Realization of Communication Interface Module for Dynamic Belt Weighting Device in Transporting Unit of Biomass Pyrolytic System
A Scheme for Excavation Displacement Monitoring Based on Image Processing
The Application of Multi-Wavelet in GPS Deformation Signal Processing
The Achievement of the Algorithm of the High Precision Dynamic Rail-Weighbridge System
Three-Dimensional Scanning System with Double Structured-Light Sensors
Methods for Testing Micro-Dose X-Ray Radiation
Local Quasi-Geoid Refinement Based on Spherical Cap Harmonic Model
Calculations on Optical Path Difference of a Reflecting Scanning Fourier Transform Spectrometry Based on Cube Reflector
Evaluation of 3D Geo-Positioning Based on Bias-Compensated RPCs for Across-Track QuickBird Stereo Imagery
Experimental Research on Shrinkage Deformation Measurement of Light-Cured Composite Resin Using ESPI
Research on Application of Hall Integrated Sensors
Vibration Testing Parameters Measured by Sampling Moiré Method
Multi-Axis Load Cell Designs Employing Multiple Shear Beams
A Monocular Vision System Based on the Equidistance Pseudo Binocular Feature Recognition
Research on the Technology of Flexible Tactile Type Sensor
Slope Adaptive Based Filtering for Airborne LIDAR
Development and Application of Velocity Collection in River Model Based on ZIGBEE
Design of Automatic Level Control for Microwave Signal Source
The Research of Surface Residual Stress about Glass Ceramics
The Measurement of Compressible Elasticity Modulus and Poisson Ratio of Ziziphus Montana Wood
Non-Intrusive Measurement of the Temperature and Size Distribution of Water Droplets in a Flat Fan Spray
Research on Verification and Analysis of Micro-Gyroscope Measuring System Based on Dynamic Response
Testing and Analysis of Actuator Parameter Identification of Heavy Load Stewart Platform
Study on Far-Field Scatter of Ship Wake for Micro-Bubbles Based on CST
The Research of Measurement System Based on Linear CCD in Industrial Line
Real-Time Measurement Method of Doppler Based on GPS Carrier Signals
Compressed Sensing Technology Applied to Fault Diagnosis of Train Rolling Bearing
Real Time Monitoring of Structural Health Using Fiber Bragg Grating Sensors Based on Arrayed Waveguide Grating Demultiplexing
Case Studies of LDV-Aided Dynamic Testing
The Diagnostic Method of Concrete Dam Monitoring Information Valid Interval
Analysis and Research of Deep Foundation Pit Pars Horizontal Displacement Prediction Method
Assessment on Pore Structure of Western Sichuan Reservoir through Mercury Intrusion Porosimetry
An Innovative Approach of Drilling Process Monitoring for Slope Characterization in Mountainous Regions
Application Research of Geological Radar in Volcanic Lava in the Geological Survey
Analysis and Mechanism of Impact of GPR Detection Effect Result from Soil Water Content
Research on Extracting Residential Information from ETM+Images - A Case Study of Jiaxing City
The Design of New Low Cost Ocean Bottom Seismometers
Research the AVG Curve Based on the Method of Flat Bottom Hole
The Application of GPS for High Rise Building Deformation Monitoring During the Servicing Stage
Research on Using WSInSAR to Monitor and Analyze Deformation Wenchuan Earthquake
Derrick Stress Monitoring System Based on Fiber Bragg Grating Sensor Technology
Stress Real-Time Monitoring of Marine Derrick Based on Environmental Loads
Experimental Research of Distributed Optical Fiber Sensor Monitors the Embankment Hidden Hazard
Experiment of Underwater Acoustic Produced by Single Drop Impacts
Research on Water Pipeline Leak Location
Distribution of the Stray Current of Rebar in the Ballast Bed
Research on Fe(100-x)Gax Alloy Applied to Magnetostrictive Displacement Sensors
Chapter 7: Related Themes
Design and Implementation of Optimal Noise Shaping Filters
Realization and Comparison of System Identification Based on Different Least Squares Methods
Damage Detection in a Cracked Rod Using High-Frequency Electro-Mechanical Impedance Signatures
Design and Analysis of Flexure Hinge in the Double Crystal Monochromator
An Investigation of Interpolation Scheme Based on Indirect Radial Basis Neural Networks
Molecular Dynamics Simulation of Crack Propagation for Leak Before Break (LBB)
Cushion Surface Modeling Based on Body Pressure Distribution and Subjective Rating
Numerical Simulation of the Impact between the Front-End-Coated Projectile and the Substrate Coated by Ceramic Film
A Real Electronic System to Control Virtual Machine in NC Machining Simulation
A Comparison of Characteristics of Improved Total Contact Insoles
Application of the FTA in the Risk Management of Refined Oil Pipeline
BIM-Based Real-Time Monitoring of the Equipment Maintenance of Property
Set Pair Analysis Method of Containing Target Constraint Mixed Interval Multi-Attribute Decision-Making
An Entropy Function Implementation of Quadratic Programming
Nonlinear Iterated Difference Inequalities
Study on Instrumental Intensity Using Wenchuan Earthquake Records
Heat Transfer and Thermal Load Analysis of Exhaust Manifold
The Evaluation and Research of Disasters Emergency Shelter in Laoshan District, Qingdao
Sound Radiation of Underwater Structure Based on the Arithmetic of Coupled Acoustic-Structural Analysis with ABAQUS
The Evolution Model of Emergency Response System for Sudden Accidents of Construction Projects
On Evaluation Methodology for the Performance of Engineering Project Management Based on 5-Element Set Pair Analysis
Research on the Land Decision of Real Estate Enterprises Based on Fuzzy AHP
Research on Quality Management System of Wuxi Taihu International Expo Center Project
External Factors Influencing the Ethical Responsibility of Construction Project
Study of Erosion Mechanism by Modelling Abandoned Yellow River Delta
Application of Extension Theory Based on Optimal Combination Weighting Method in Risk Assessment on Geological Hazards
Numerical Simulation of Velocity Attenuation of Aerated Jet Flows
An Experimental Study on the Performance of Wave Dissipation of Artificial Sand Bar
Application Research of Support Vector Machine Based on Particle Swarm Optimization in Runoff Forecasting
Reliability Study of Excavation Safety in Underground Space of Chen Clan Academy Square
Study on Critical Conditions of Scour-and-Siltation in Flood Seasons of Ningmeng Reach in the Upper Yellow River
Effects of the Large-Scale Reclamation Project on Hydro-Dynamic Environment in the Estuary
The Riverbed Evolution and its Influence on Channel in Tunaozi Reach after Three Gorges Water Storage
Taking Fangcun District of Guangzhou as an Example to Discuss the New Joint Repair Technology of Water Distribution Network
Influence of Radius of Horizontal Curve on Driver's Psychology and Physiology on the Two-Lane Mountain Highway
ITS - The Key of Traffic Transportation Sustainable Development
Application of Differential Transform Method to Buckling Problems at Clamped-Clamped Boundary Conditions
An Algorithm for Connecting Suburban Rail Line to Urban Rail Transit Network
Synchronous Transfer Model of Bus Timetabling for Regional Public Transit
Study on the Highway Speed Limit at the Days of Snow and Ice
Road Traffic Safety Assessment Based on the ADAMS/Car under Snow and Freezing Weather
Real-Time Risk Assessment Model of Freeway Traffic in Rain and Fog Weather
Application of Unmanned Aerial Vehicle Remote Sensing for Geological Disaster Reconnaissance along Transportation Lines: A Case Study
Freeway Construction and Management Technology Research Based on the Data Net Toll-by-Weight Fees
Load Dependent Hysteresis Model for GMM and its Parameter Identification
Study about the Recycled Construction Wastes for Landscape Design
Application of Western Surrealistic in Design of Landscape Architecture
Research on Energy Saving Supervision System of Colleges and Universities Heating Based on Control Theory of Time & Temperature Sharing
Experimental Study on a Shower Waste Water Heat Recovery Device in Buildings
Studies on Building Entrance Cold Adaption Design and Structure in Cold Region - Take Harbin Institute of Architecture as Example
The Evaluation of Design for Energy Efficiency of Buildings Based on Analysis Hierarchical Process and Grey Theory
Theory Landscape Architecture Skit the Flower Window Design Culture
Brief Analysis of Landscape Architecture Sculpture Sketch
Developing a Framework for Evaluating Architectural Style Based on GEP
A Brief Analysis on Technological Expression of Contemporary Architecture
Study on Energy Conservation in Rural Residential Buildings in China
The Research of the Development of Architectural Surface
Study on the Evaluation of Urban Industrial Land Intensive Use
Analysis of Methods of Creating Microc-Limate for Waterfront Residential Areas in Tropics of South Asia
Implementing a New Urbanization Strategy, Enhancing Tai’an’s Tourist Soft Power and Quickening Economic Development
The Elaboration of Five "Perspectives": Application to Traditional Landscape Idea in Modern Landscape Design
Planning of Disaster Prevention Space System Based on Urban Morphology - Take Suzhou Old Urban Area as an Example
A New Continuous Model of Shape Memory Alloys
The Freeway Energy Conservation and Emission Reduction Guarantee System Research
Data-Driven Tracking Based on Kalman Filter
Design of High Frequency Program-Controlled Filter
