Sonstiges, Englisch, Band Volumes 391-392, 1600 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Advanced Materials Research
Sonstiges, Englisch, Band Volumes 391-392, 1600 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Advanced Materials Research
ISBN: 978-3-03795-156-9
Verlag: Trans Tech Publications
The 2011 International Symposium on Chemical Engineering and Material Properties (ISCEMP 2011) was a premier forum for the presentation of technological advances and research results in the fields of chemical engineering and material properties. ISCEMP 2011 brought together leading engineers and scientists, working in chemical engineering and material properties, from around the world. The present peer-reviewed papers were selected on the basis of originality, technical quality and research content.
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Hollow PtRu Nanospheres Catalyst Supported on Activated Carbon Fiber and Carbon Nanotubes for Methanol ElectroxidationPreparation, Performance and Analysis of Carbon Fibers with Dielectric Barrier Discharges Plasma Surface TreatmentPreparation and Properties of Carbon Nanotube / Polyaniline NanocompositesHybrid Supercapacitors Based on Polyaniline and Carbon Aerogels Composite Electrode MaterialsSynthesis and Electrochemical Performance of a Novel Nano-Sized Sn-Ni Alloy Composites for Lithium BatteriesTribological Properties of Al-21Si-0.8Mg-1.5Cu-0.5Mn Alloys against Steel under Lubrication ConditionsEffect of La-Rich Misch Metal on Microstructure and Mechanical Properties of As-Extruded Mg-14Li-3Al AlloyTheoretical Account for the Bimetallic Bonding of the Copper Clad Aluminum Wire by Clad-Drawing at Room TemperatureStudy on Ni/Al Interface Diffusion at Initial Time by Using Molecular Dynamics MethodOptimization of Process Parameters of Hot-Dip Aluminized CoatingSurface Characteristics of Single Sisal Fiber and Interfacial Adhesion of CompositesExploring the Reaction Heat Controlling and Engineering Scale Law in the Process to Synthesis PPTA Using Low-Temperature Solution PolycondensationExperimental Research on Bonding Intensity of Iron Ores in the Sintering ProcessStudy of Ferrous Material Reduction Based on Thermal Reserve Zone of Modern Blast FurnaceThe Influence of Iron Ore Quality Degradation on the Assimilability of Sinter OrePreparation of High Performance Polybenzoxazine Resin Using Hyperbranched PolyborateModes of Occurrence of Trace Elements (Na, K, Fe, Si) in Coal Used for COREX ProcessPreparation and Optical Properties of CdS/PVK Nanocomposites Based on CdS Nanorod ArraysMicrostructure and Properties of 0.2mm Thick Sheet Titanium Alloy by Micro-Laser WeldingA Lattice Boltzmann Model of Calculating Mass Diffusivity in NanofluidsA Simulation Analysis Method for Crack Resistance of Hydraulic Concrete Based on Temperature-Stress TestSynthesis of Stereoregular PolylactideStudy on the Weakest Interaction Model for Chiral Resolution Using Molecularly Imprinted PolymerInsulation Properties of the Monolithic and Flexible Aerogels Prepared at Ambient PressureEffect of Sr Addition on Microstructures of as-Cast Mg-5Sn-5Zn AlloyEffect of Tide on Sewage Disposal by Bio-Film Process Dosing with EnzymeEffect of Water Flow Pattern on the Treatment of Discharged Sewage by Biological Accelerator-Bio-Film ProcessEffect of Sewage Load Shock on Channel Disposal by Bio-Film ProcessTorque Rheological Properties of Bamboo Flour/PP CompositesEffect of Different Compatibilizing Agents on the Compatibility of Lignin/LDPE CompositesProperties Analysis of Organic Montmorillonite (OMMT) Reinforced RTV CompositesInfluences of Rare-Earth Ions Doping on the Structure and Photocatalytic Activity of TiO2Research on the Interfacial Tension between Anion Gemini Surfactant Solution and Crude OilProportion Design of Autoclaved Cement Concrete Based on High StrengthStudy on the Resistance Spot Microwelding Parameters of Copper and Nickel-Plated Steel Dissimilar MetalsExcess Gibbs Free Energies of Selected Binary Halogenated Silane Mixtures at 101.3KPaSingle Layer Graphene Oxide Sheets-Epoxy Nanocomposites with Greatly Improved Mechanical and Thermal PropertiesPreparation of High-Performance Brick from Construction and Demolition WastePreparation and Properties of Microstructure Flexible Image Transfer Fiber MaterialsPreparation of Flame-Retardant Asphalt for TunnelsStrontium Modification of Biomaterial: The Effective Approach to Enhance the Bioactivity and Biocompatibility of Calcium SilicatePreparation and Combustion Properties of Sepiolite/LDPE CompositesSynthesis of a Novel Intumescent Flame Retardant Oligomer and its Application in ABS CopolymerPreparation and Thermal Properties of Novolac Resin/Graphite Nanosheet CompositesInfluences of Hot Rolling Conditions on the Microstructure and Mechanical Properties of Low-Alloy SteelEuropium Doped Titania Nanocomposites with Enhanced Photocatalytic Activity towards the Degradation of Partially Hydrolysis PolyacrylamideSynthesis and Luminescence Properties of Tris (8-Hydroxyquinoline) Iron Spindle-Like Structures at Room TemperatureThe Influences of Lateral Confinement on Ballistic Performance of TiC-TiB2 Composites under the Impact of Long-Rod Kinetic-Energy ProjectilesPenetration Mechanisms and Ballistic Performance of TiC-TiB2 Composite Armour under the Impact of Long-Rod Kinetic-Energy ProjectilesApplications of Advanced Composite Materials in Bullet-Proof Fields and their StudyManufacture and Research on Performance and Organizations of New Type Carburized Bainitic Hollow SteelEffective Reinforcement of Graphene in Poly (vinyl alcohol) Nanocomposites at Low Loading via Enhanced Interfacial InteractionStudy on Characteristics and Oil Displacement Characteristics of High Concentration Polymer SystemHollow Structure of Nano-Crystals by Microemulsion MethodLight Absorption Enhancement in Single Si(Core)/SiO2(Shell) Coaxial Nanowires for Photovoltaic ApplicationsInfluence of SiO2 Content on Fractal of Grain Distribution in Low Silicon SinterEffect of MCM-41 and SBA-15 Mesoporous Molecular Sieves on Properties of PMMA-Based CompositeCompatibilizing Effect of MCM-41 and PP-g-MAH on the Mechanical and Thermal Analyzer of PP/PS BlendsInsulating and Thermally Conductive Composite Filled with Boron Nitride ParticlesGlycocerebrosides from Sagina japonica (Sw.)Paleodose of Quartz in Volcano Ash beside Huguang Maar LakeResearch on In Situ Observation of Fracture Process of Fiber/Epoxy CompositesComparison of Removal of 2,4-DNT by Reduction Using Various Iron-Based MaterialsSynthesis and Properties of Fluorenyl-Containing Multiblock Sulfonated Poly(Arylene Ether Sulfone) Membranes for Fuel Cell ApplicationsStudies on the Relationship of Polymer Backbone Rigidity and Properties for Proton Exchange Membranes Derived from Sulfonated Polys(Arylene Ether Sulfone)Disulfide Cross-Linked Hydrogel Scaffold Based on Poly (Amic Acid) with Tunable DegradationA New Method on Low-Cycle Corrosion Fatigue of Pipelines Taking Strain as ParameterDevelopment Strategy of Insulation Macromolecular Composite MaterialsResearch Progress of Heat Hv Insulation Resistance of Macromolecular Composite MaterialsThe Influence of Additives on the Heat-Resistant High Voltage-Resistant Insulation MaterialTechnology of Heat-Resistant & High Voltage-Resistant Insulation Materials Based on Polymer CompositeThe Effects of Fiber Orientation on the Vibration Modal Behavior of Carbon Fiber Plain Woven Fabric/Epoxy Resin CompositesModal and Harmonic Response Analysis of Composite Resin ConcreteThe Research of the Harmful Substances about Aggregate in ConcreteBending Properties of Five-Layer Biaxial Weft Knitted Fabric Reinforced Composite MaterialsAl2O3/ADC12 Composites Fabricated by Decomposition-Synthesis Method and their Mechanical BehaviorsSynthesis of Li4Ti5O12 Anode Material for Lithium-Ion BatteriesPreparation of Two-Package Inorganic Insulation CoatingPreparation of LiFePO4/C Composite PowdersResearch Development on the Preparation of Gold-Coated Magnetic NanoparticlesMicrostructure and Properties of Ultrafine Grained Cu-0.73%Cr Alloy after High Pressure TorsionAdsorption Activity of Low Concentration Arsenic on Fe-Doped Titania NanotubesThe Structure of the Turtle Shell and the Porous Metal Mimicking the Structure of the Turtle ShellPreparation of Cellulose Acetate Ultra-Fine Fibers Containing Quasi-Spherical Gold Nanoparticles by Electrospinning MethodKinetics Study of Copper (II) Adsorption from Solution by Wheat HuskStrucutural Color Bio-Engineering by Replicating Morpho WingsSize-Dependent Diffusion Coefficient in Nanocrystalline MaterialsUse of Software to Facilitate Intumescent Fire-Retardant Coatings for Structural Steelworks?s FormulationSurface Modification of Aluminum by Plasma and the Surface Initiated PolymerizationPreparation of TiO2 Nanometer Thin Film Deposited on Organic Templates by a Layer-by-Layer Self-Assembly MethodEffect of TMCP Parameters on the Microstructure and Properties of the API X60 Pipeline SteelsEffects of Sintering Processes on Microscopy of CAS2-Al2O3 Refractory MaterialsStudy on Hydration Resistance Property of Gehlenite-Forsterite Refractory MaterialMicrostructure Observation of Ni50Ti45Ta5 Shape Memory AlloyPreparation and Properties of C2AS-CAS2 Composite Pavement BricksStudy on the Application of High Calcium Magnesium Slags to Light Heat-Insulation Refractory MaterialsVibration Isolation Research on the Metal Rubber Damping Rod of Payload Attach FittingStudy of Aging Treatment on the Coating with 3%Cu/Fe-Based Alloy Fabricated by Laser CladdingMicrostructure and Mechanical Properties of Laser Welding Joint of Inconel 718 Super Thin SheetEffects of Electroless Parameters on Fe Content in Ni-P-Fe2O3 Composite Coatings on Stainless SteelPrediction of the Average Diameter of Laser Ablated Silver Nanoparticles Colloid Based on Artificial Neural NetworksPreparation and Characterazation of Fluorescent Silica MicrospheresThe Cohesive Energy of W and Mo Nanoparticles Based on Wulff ConstructionA New Method for Manufacturing Composite Ingot of 4045/3004/4045 Aluminum AlloySol-Gel Preparation of Optically Transparent Hydrophobic Hybrid CoatingEffect of Color on Optical Properties of New-Type Invisible Warp-Knitted Curtain FabricConductive and Mechanical Properties of Graphite Nanoplatelets/PVC Nanocomposites Prepared by Melt BlendingA Novel Way to Fabricate Carbon Nanotubes Reinforced Copper Matrix Composites by Friction Stir ProcessingStudy on the Properties of Poly(lactic acid)/Starch/Chitosan Blended MaterialsInfluence of Electric Current Pulses on the Microstructure and Mechanical Properties of X70 Pipeline SteelStudy on the Microstructure and Properties of Resistance Spot Welding Joint for Ultra Fine-Grained SteelStudy on Synthesizing and Characterizing of Zinc Ferrite NanoparticlesSynthesizing and Characterizing of ZrO2 Nanopowders via Ultrasound-Assisted Sol-Gel MethodEffect of Heat Treatment on Microstructure and Mechanical Properties of TRIP Steel Sheets Containing AluminiumEffect of Extrusion Time on Microstructure and Mechanical Properties of AZ31B Magnesium Alloy Prepared by Solid-State RecyclingEffect of Nd on the Microstructure and Mechanical Properties of High Aluminum Zinc-Based AlloyStudy on Porcelain Acoustic Emission Signal Based on All Phase Spectrum AnalysisFabrication of Porous Reaction-Bonded Si3N4-SiC CompositesEffect of Material and Pin Surface on Vertical Force in Friction Stir WeldingThe Plastic Deformation Characteristics of Crystalline Polymer Materials via Rolling ProcessMechanical Properties and Morphology of Poly(Lactic Acid) Composites with Oyster Shell ParticlesMorphology Change of Extrusion Molded Crystalline Polymer by Rolling ProcessInfluence of Rubber Crumb Addition to Portland Cement ConcreteEffect of Yttrium Addition on High Temperature Oxidation Resistance of Co-10Cr-5Al AlloysGrain Size Effects on the Oxidation of Two-Phase Cu-Fe-Al AlloysOxidation Resistance of Co-10Cr-5Si-0.3Y Alloys at 800?CResearch on the Effect of Heat Treatment Parameters of Rotary Tiller Blade on Anti-Wear PropertiesHAP/UHMWPE-Coated Titanium Preparation of Biological MaterialsExperimental Study on Residence Time Distribution of New Type Multi-Tubular Stirred ReactorBiomineralization of the Hydroxyapatite with 3D-Structure for Enamel ReconstructionMicrostructure and Mechanical Properties of Mg-1Mn-0.6Ce Alloy Containing YttriumNumerical Simulation of Laser Welding for Different Thickness Aluminum Alloy PlateUnderstanding the Effect of the Preparation Process on the Electrochemical Properties of 0.25Li2MnO3?0.75LiNi1/2Mn1/2O2 by Rietveld Refinement MethodAnalysis on Residue Stresses in Coating of Thin-Wall Parts by Plasma SprayingStudy on Resistance Spot Welding Technology and Properties of TRIP800 High Strength Steel SheetNumerical Simulation of the Temperature Field During DP1000 Dual-Phase Steel Resistance Spot WeldingSurface Polishing of Plasma Carburized Austenitic Stainless SteelPreparation of Light Transmitting Cement-Based Material with Optical Fiber Embedded by the Means of Parallel ArrangeStudy on Reaction Products of B4C-CeB6/Al CompositesRheological and Thermal Behavior of Recycled PET Modified by PMDAInfluences of Bleached Softwood Pulp Pretreated with Endo-Cellulase on Fiber Surface Properties and Aggregation StructureElectrolysis Process for Preparation of Solar Grade SiliconAnalysis of Gas Utilization Efficiency in Injection Refining ProcessHydrothermal Synthesis and Characterization of Tb3+ Doped HydroxyapatiteMicrostructure and Mechanical Properties of Spray Deposited W9Mo3Cr4V High Speed SteelVisualisation of Cornstarches Granule with Different Amylose/Amylopectin Contents: A Combined CLSM and SEM ApproachForce Analysis of Inclined Asphalt Concrete Wall Rockfill Dam StructureSynthesis, Characterization and Photocatalytic Activity of Copper (II)-Doped Titanium Dioxide PowdersModeling of Adsorption Isotherms for Hydrogen on Zeolite ZSM-5A Review on Synthesis of High Performance Composites from ZirconPhase Formation of Fe-Mn Binary Alloy During Sub-Rapid SolidificationNano-Silver Paste with a Low Sintering TemperatureDensification and Microstructure of Tungsten Ore/Al-Cu Composites by Combustion SynthesisPreparation of Coal Briquette by Using Coal Waste and Coal SlurryStructure Design and Force Analysis of Dushan Inverted Siphon EngineeringResearch on Microstructure and Properties of Welded Joint of 2205 Steel with FCAWStudy on Weldablity of Dissimilar Steel between 16MnR and S31803Synthesis of Lignin-Base Bead Adsorbent and its Application in Removing Pb (II) from Aqueous SolutionPreparation and Characterization of Fe36Co36B20Si4Nb4 Nanocrystalline/Amorphous Matrix CompositeA Comparative Study on Co-Sorption of Zn(II) and As(V) by Mixed Fe/Al-PILCs Prepared at Different Calcination TemperaturesPreparation of Nano-Sized Tin Oxide by Polymer-Network MethodStructure Evolution of Fe-7.5at.%Ni Alloy Thin Strips under Near-Rapid Solidification ConditionsA Thermo-Sensitive Laser Imaging Composition Derived from a Modified Phenolic ResinEffect of Amount on Expansion Property of MgO-Type Expansive Agent Used in Cement-Based MaterialsMechanical Strength and Resistance to Ultraviolet Radiation of Repairing Mortars Based on Epoxy ResinStudy on the Resistance of Ultraviolet Radiation of Composite Materials Based on Epoxy ResinPreparation of Thick-Film Organosilicone CoatingProgress in Thermal Conductivity of Modified Polypropylene CompositesSynthesis and Characterization of Poly(Aryl Ether Quinoxaline)s with Controlled Molecular WeightEffect of the Al Incorporation on the Dispersibility and Crystallization of AZO Nanoparticles Prepared by Sol-Gel Combustion TechniqueCharacterization of Nanosize Mn-Zn Ferrites Coated with Citric AcidEffect of Sintering Conditions on the Properties of Mn-Zn Ferrites Produced by Co-PrecipitationFundamental Research of Sintering Process on Improving the Tumbler Strength of Low SiO2 SinterThermal Cracking Resistance of Shotcrete Based on Temperature Matched CuringEffect of Metakaolin Mixed with Fly Ash on the Strengths of ConcretePreparing of the Nano ATO Heat-Insulation Glass CoatingEffect of Heat Treatment on Properties and Structural Changes of Poly(p-Phenylene Benzobisoxazole) FiberInfluence of Ion Current Density on the Surface Morphology of AZ31 Magnesium Alloy Irradiated by High-Intensity Pulsed Ion BeamEffect of Calcium Salts of Aliphatic Dicarboxylic Acids on the Formation of ? Crystalline Form in Isotactic Poly(Propylene)Study on Purification and Removal of Iron from Alloy AnodeSynthesis and Properties of Organosoluble and Transparent Fluorinated Aromatic PolyimidesThe Feasibility Research of Using an Intensified Continuous Mini-Reactor to Replace a Discontinuous ReactorWater-Soluble Acrylic Acid Copolymers and their Recycling PropertiesSynthesis and Characterization of Spinel LiNi0.5Mn1.3Ti0.2O4One-Step Synthesis of Methyl Isobutyl Ketone from Acetone Catalysed by Ni-ZirconiaCationic Gelatin Graft Copolymers: Synthesis, Characterization and ApplicationAlkali-Thickening Characteristics of Vinyl Acetate and Vinyl Ester Versatic Acid Copolymer Latex Using Carboxylic MonomersPreparation of Acicular ?-FeOOH by Liquid-Precipitation and Air-Oxidation MethodParticle Morphology and Electrochemical Performance of LiFePO4 Synthesized via Hydrothermal Process at 200?CAnalysis on Factors Influencing Flake Silver Particles Prepared by Chemical ReductionEffect of Doping Cation Valencies on Low Temperature Performance of LiFePO4/CStudy on the Effect of Distillation Residue in Corn Polyols Industry on Thermoplastic StarchAdsorption of Thiophene Out of Model Gasoline Using Metal Ion-Exchanged ZeoliteFunctional Modification of Xylan-Rich Hemicelluloses in Ionic LiquidStudy on the Electrodeoxidation of Solid Dy2O3 in Molten CaCl2Perovskite-Type Complex Oxides Catalyst Composed of Rare Earth-Alkaline Earth-Transition Metal Elements for Soot Combustion in the NO and O2 AtmospherePreparation of the AC/TiO2 Composite Particles in Normal Temperature and Degradation of TNTAdsorption of Pb2+ in Wastewater Using Adsorbent Derived from Grapefruit PeelLi(Ni1/3Co1/3Mn1/3)O2 with High Rate Capability Synthesized via a Novel Gel-Combustion MethodProperties of LiNi0.5Mn1.5O4 /Li Cell in Ionic Liquid Electrolyte Based on N-methyl-N-propylpiperidinium Bis(trifluoromethanesulfonyl)imideStudy on SOC Forecast Model in Regions of Hilly Purple Soil by Water ErosionMicrowave and Conventional Hydrothermal Synthesis of TiO2 Nanoparticles and their Photocatalytic ActivitiesEffect of Sr Addition on the Microstructure of Mg-6Zn-2Al-2Ca AlloyA Study of the Adsorption and Diffusion Behavior of a Single Polydimethylsiloxane Chain on a Silicon Surface by Molecular Dynamics SimulationIsolation and Characteristic of Chondroitin Sulfate from Grass Carp ScalesApplication of Response Surface Methodology for Optimization of Cellulose Solution by ZnCl2Calculation of the Separation Factor for some Silane SystemsCalculation on the Free Energy of Mixing of some Silane SystemsPreparation and Spectral Properties of Er3+/Yb3+ Co-Doped Phosphate Glass Active Optical FiberPreparation and Characterization of Novel Borate K2O?CaO?4B2O3?12H2O:Sm3+Adsorption Disciplinarian of Metal Ions on Collagen Fiber Immobilized Bayberry TanninPreparation and Characterization of Lanthanum (La)-Doped TiO2The Study on the Defect States and Persistent Luminescent Mechanism of MgSiO3: Mn2+, Dy3+ PhosphorResearch on Characteristics of Combination Flooding System and Oil Displacement EfficiencyStudy on Minimum Miscible Pressure and Oil Displacement Law for CO2 FloodingImpacts of Biochar on Agriculture Soils and Environmental ImplicationsThe Development of Poplin which Release AnionThe Effects of Citric Acid on the Performance of Li3V2(PO4)3/CSurface Modification of Spinel LiMn2O4 with Y2O3 for Lithium-Ion BatteryInfluence of Weight Ratio of Citric Acid Cross Linker on the Structure and Conductivity of the Crosslinked Polymer ElectrolytesEffect of Rotating Electromagnetic Field on the Conductivity of Aqueous NaCl SolutionEffects of the Pre-Freezing Time on the Structures and Electrochemical Performances of Co-B AlloysComposite FeF3?3H2O/C Cathode Material for Lithium Ion BatteryComparison on Effect of Alternating and Stationary Magnetic Field on the Conductivity of NaCl SolutionsPreparation and Characterization of Nickel Plating Graphite Nanosheet Filled Conductive AdhesiveEffect of Ultrasonic Treatment on Acid Hydrolysis and Oxidation of Corn StarchStudy on Preparation and Mechanical Intensity of Nano-Mg(OH)2/Tussah Silk Fibroin Composite MembranePhotocatalytic Oxidation of Methyl Orange over Titania-Bearing Blast Furnace Slag Photocatalysts and Effects of Cr(VI) under Visible IrradiationVisible Light Photocatalytic Activity of C, N, S-Tridoped Anatase TiO2 NanosheetsSynthesis and Photoluminescence Properties of Sm3+-Doped Ca10(PO4)6(OH)2 Nanowire
Ab Initio Study the Transport Properties of Alumium-Phosphorus Dopped Si Atomic NanowireInfluence of pH on the Morphology and Luminescence Properties of Europium-Doped Hydroxyapatite NanoparticlesResearch on Chloride Leaching of Cu, Zn and Ag from Flotation TailingsResearch on Copper Solvent Extraction from the Solution Containing High Concentration of Sulphuric Acid and IronResearch of Catalytic Oxidation Synthesis of Cyclopentene to GlutaraldehydeThe Disassociation of Cordyceps Exopolysaccharide in Aqueous Solution Induced by UltrasoundSynthesis of N,N,N-Trimethyl-1-Adamantyl Quaternary Ammonium Hydroxide and Technology DevelopmentLow Temperature Plasma-Initiated Copolymerization of Acrylamide and Sodium AcrylatePlasma Activated Acrylamide Initiated Polymerization of AcrylamideRemoval of Strontium Ions from Aqueous Solution by Adsorption onto Sodium Trititanate WhiskerOptical Properties and Liquid-Crystalline Behaviors of Cyclosiloxane-Based Oligomer FilmsEffect of Bismuth on the Microstructure and Corrosion Resistance of Galvanized CoatingPreparation of Slag Reactive Powder Concrete and the Research on its Resistance to Chloride Ion PermeabilityResearch on Preparation and Electromagnetic Properties of Polyaniline Nanofibers through Interfacial PolymerizationMechanism and the Influences of Different Substrates on Photocatalytic Property of TiO2 MembraneInfluence of Calcining Atmosphere on Synthesis of Mixed Conducting Oxides SrFeCo0.5Oy by Citrates Sol-Gel Method600?C Isothermal Section of the Zn-Fe-Nb Ternary System at the Zn-Rich CornerEffect of Supports on the Properties of Co-Mo Nitride Catalysts for Ammonia DecompositionResearch of Oxidation Starch Conversion and CrystallinityEffects of Electromagnetic Stirring Plus Single Pulse on the Microstructures and Properties of High Strength Al-Cu Alloy WeldsKinetic Investigation of Thermal Decomposition Reactions of Podophyllic Acid and Picropodophyllic AcidSynthesis of Diphenyl Carbonate from Carbon Dioxide Catalyzed by ZnCl2 Supported on SiO2-TiO2Synthesis and Characterization of Hexagonal Prismatic Ca10(PO4)6(OH)2 Prepared by Homogeneous Precipitation MethodPreparation of Silver Nano-Particles by CO(NH2)2?H2O2Preparation of Nanocrystalline Magnesium Aluminate Spinel Powder by Thermal Explosion Mode of LCSStudy of Adsorption Characteristics on Active Carbon for Ventilation Air Methane SeparationEffect of the Surface Morphology of Calcium Carbonate on the Impact Toughness of Polyamide 6/EPDM-M/CaCO3 Ternary CompositesHot Corrosion Behavior of Sputtered Fe-Y Alloy Coatings with Different Y ContentsDegradation Characteristics of Rice Straw/Poly(Lactic Acid) CompositesPreparation and Characterization of the Novel Ti/PbO2 Electrodes by Electrodeposition and AnodizationThe Chemical Reaction Mechanics of Bastnaesite in Low Temperature Activation ProcessPhotocatalytic Activity of Sm-Doped BiVO4 Powders Prepared by Chemical Precipitation ProcessSimultaneity Extraction of Iron and Nickel from Acidic Leaching Solution of Laterite Ores with Emulsion Liquid MembraneFabrication and Photocatalytic Activities of TiO2 Nano-Films Deposited at Different Ar/O2 Flow Ratios by DC Magnetron SputteringDirect Synthesis of 3,5-Dinitropyrazole Catalyzed by Newly Sulfated Nanosolid Superacid TiO2/ SOStudy on Properties of Al2O3 ?CaO-Na2CO3 Slag SystemEffect of Different Initiator Systems on Graft Copolymerization of Cellulose Fiber with CaprolactamInfrared Spectrum Analysis of Perfluoro Polyethers (PFPE) of Fluorocarbon-Based Magnetic Fluid?s Base LiquidResearch on Methods of Ascertaining Characteristic Parameter for Small Watershed Soil ErosionImproved Enzymatic Depolymerization of Chitosan by Ionic Liquid Pretreatment and the Effect of Oligo-Chitosan on Intestinal Flora In VitroPreparation and its Adsorption Characters of Pb2+ Ions-Imprinted Chitosan/Palygorskite Hybrid MaterialsEffect of Ultrasound on Acid-Alcohol Treated Hydrolysis of StarchSynthesis of Titania Nanotubes and its Application on Oxalic Acid Removal from Aquatic EnvironmentHydrothermal Synthesis of Glutathione-Capped ZnCdSe Alloyed Quantum DotsEffect of Chloride on Corrosion Behavior of Reinforcing Steel HRB335Treatment of Ammonia-Nitrogen Wastewater by ElectrodialysisStudy on Oxidation Kinetics of Catalytic Oxidation of Magnesium SulfiteThe Novel SO3H-Functionalized Ionic Liquids Promoted Synthesis of Xanthenedione Derivatives in Aqueous Media under Microwave IrradiationStudy on Corrosion Mechanism of Gas Quenching Steel Slag to MgO CrucibleEffects of Y3+-Doping on the Electrochemical Properties of LiV3O8 Cathode Material Prepared by a Solid-State MethodOptimized Structures and Theoretical 1H-NMR Spectral Analysis of the Methylene Protons in Dibenzyl SulfoxideStructures, Theoretical Vibrational Frequency and 1H-NMR Spectral Analysis of Pyrazine-Dibenzylsulfoxide Platinum(II) ComplexesElectrochemical Detection of Hydrogen Peroxide at Carbon Nanotubes-Poly(Styrene-Co-N-Isopropylacrylamide) Nanoparticles Modified ElectrodeSensitive Electrochemical Detection of 2,4-Dichlorophenol Using Novel Carbon Fiber MicroelectrodeAmbient Condition Synthesis of Ag Submicron Crystallites from AgNO3, H2O2 and NH3?H2OStudy on BaSiO3 Solid-Solid Reaction through Irreversible ThermodynamicsDesign and Optimization FCCU Absorption-Stabilization System through Process SimulationSelectivity Patterns of Radical Reactions in 1-Hexene PyrolysisEffect of Additives in the Casting Solutions on the Morphology and Performance of PVDF MembranesRemoval of Fluoride from Aqueous Solution by Using Ca-Bentonite and H-BentonitePreparation and Optical Properties of Poly[3,4-Bis-(1,3-Dioxane-2-Ylethyl)] ThiopheneSelf-Assembly of 4-Vinylbenzoic Acid Layer on the Magnetic Nanoparticles and In Situ PolymerizationResearch on Excellent Engineer of Chemical Machinery Cultivating SystemSynthesis and Characterization of Gradient Cathode Material for Lithium-Ion BatteriesInvestigation on the Co-Combustion Characteristics of Textile Dyeing Sludge and SawdustCryogenic Interlaminar Properties of PBO Fiber/Epoxy CompositesIntelligent Operation Control for the Fused Magnesia ProductionResearch on Liquid Fuels and Chemicals of Waste Blends CopyrolysisHydrodynamics and Mass Transfer Behavior of a Novel Structured Packing with Diversion WindowsCFD Simulations and PIV Measurements for Optimization of Flow Pattern in a Sieve Plate Extraction ColumnMass Transfer Performance of a Novel Structured Packing for Liquid-Liquid ExtractionSynthesis and Performances Analysis of Imidazoline Quaternary Ammonium Salts Containing Thioureido GroupStudy on Fire Residues in Pure Cotton Fabric CombustionResidual Stress and Corrosion Resistance Experimental Analysis of Closed Extruding Fine Blanking Parts SurfacePreparation and Photocatalytic Properties of TiO2-CoFe2O4 Magnetic Composite PhotocatalystSpectral Properties of Alpha-Cu2(OH/D)3Br at Room TemperatureStudy of Copolymerization Mechanism between Vinyl-POSS and Citronellal with Quantum Chemistry Program Based on DFT
