Selected, peer reviewed papers from the 2014 China Functional Material Technology and Industry Forum (CFMTIF 2014), August 26-28, 2014, Xi’an, China
Buch, Englisch, 948 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1500 g
ISBN: 978-3-03835-352-2
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preface, Committees and Sponsors
Chapter 1: Nanoscale Materials and Nanocomposites
Thermoelectric Properties of Binary-Phased Nanocomposites
Effect of Additives on the Formation of SmCo Magnetic Nanoparticles by Chemical Synthesis
Research Development of Preparation Technology of BaTiO3 Nano-Power
Synthesis of PbS Nanocrystals by Heterogeneous Reaction
Lubrication Mechanism of Nanoparticles in Metal Hot Deformation
The Preparation and Photo-Thermal Property of Ag2S Nanomaterials
Multiwalled Carbon Nanotubes Covered with Cobalt (II) Phthalocyanine by In Situ Synthesis and its Electrochemical Sensing Performance towards DA and UA
Mild and Low-Cost Synthetic Process for Monodispersive Platinum Nanoparitcles on Carbon Aerogel
Synthesis and Characterization of Poly(2-acrylamido-2-methyl propyl sulfonic acid-co-2-hydroxyethyl methclate)/ Silver Nanoparticle Composite Hydrogel as Catalysts for the Reduction of 4-Nitrophenol
Synthesis and Optical Property of ß-In2S3 Nanorods
Preparation of Chromium Nitride Nanopowders Using High Pressure Gas-Solid Reaction Bed
Preparation of Silver Nanoparticles in Water-Alcohol Mediea
New Preparation Method and Characterization of Nanosilver
Influence of Nd Doping on the Magnetic Properties of Nd2Fe14B/a-Fe Nanocomposite Magnets
Influence of Fabrication Parameter on the Nanostructure of SiNWs under HF/AgNO3/Fe(NO3)3 Etching System
Giant Magnetoimpedance in Fe73.5Cu1Nb2V1Si13.5B9 Nanocrystalline Ribbons
Preparation and Performance of Polypropylene/Modified Carbon Fibers by Physical Blending Method
One-Step Preparation of Nanoparticulate TbFeO3 by Microwave Process and its Visible-Light Photocatalytic Activity
Nanoscale Hollow-Bubbly Polypyrrole Obtained via Interfacial Polymerization with Phase Transfer Catalyst
Influences of Reaction Temperature on Structure and Performances of SnO2 Nanocrystals Prepared by Microwave Hydrothermal Method
Chiral Resolution of Ofloxacin Using Carboxylated Multi-Walled Carbon Nanotubes Mediated Thin-Layer Chromatography
Lawson Cypress Leaf-Like ZnO Hierarchical Nanostructures by Self-Assembly
Research on Preparation of Barium Titanate Nano Powder by Sol-Gel
Preparation of Nanoparticulate ErFeO3 by Microwave Assisted Process and its Photocatalytic Activity
Multifunctionalities of Nanocarbon Materials Filled Cement-Based Composites
Effect of Nano-Magnesium on the Thermal Decomposition of PTFE
Synthesis and Properties of Nano-TiO2 Modified Fluorine-Containing Polyacrylate Soap-Free Emulsion
Fabrication of Highly Hydrophobic Polyurethane Foam for the Oil-Absorption Application
Effects of Carboxyl Functionalized Carbon Nanotube on the Tensile Strength and Wear Resistance of Epoxy Composites
Improved Low Temperature Solution Synthesis of Silicon Nanoparticles for Lithium-Ion Batteries
Synthesis of Highly-Ordered V2O5 Nanowires by AAO Template and its Electrocatalytic Activity for Dopamine Electro-Oxidation
Preparation and Characterization of Mg-Doped GaN Nanowires by Au-Catalyzed Magnetron Sputtering Deposition
Chapter 2: Microscale Materials and Thick Films
Preparation of Dry Waters and their Fire Extinguishing Performance
Synthesis of Mesoporous Silica Microspheres by PICA and Pseudomorphic Transformation Using Silica Fume as Silica Source
Effect of Tetramethyl Ammonium Hydroxide on Dispersion of the Silicon Carbide Submicron Powders
Synthesis of a Novel Lanthanide Oxide Nitrate Compound with 3D Structure
Hollow Polymer Nano-Latex Microspheres Prepared by In Situ Polymerization with the Method of Encapsulation Non-Solvent
Fabrication of Highly Ordered Two-Dimensional Graphene Arrays on Patterned Substrate
Preparation and Characteristic of Different Hollow Microspheres Filled Syntactic Foams
Enhancement of Hydrophobility and Thermal Property of Graphene Oxide by Paratoluidine Chemical Functionalization
Influence of FRP Residue on the Properties of Epoxy Based Artificial Granite
Preparation of Zinc Phthalocyanine-Calcium Alginate Gel Beads and its Use for Photocatalytic Oxidation Decolorization of Methyl Orange
Variation Law of Temperature Field and Pressure Field in Synthesis of SiC by Carbothermal Reduction Method
Influence of FRP Waste on the Properties of Unsaturated Polyester Resin Based Artificial Marble
Effects of Different Ligands Value on the Synthesis of FePO4 Precursor
Review on Classification and Application Prospect of Ultrafine Powder Material
Research on Process of Drawing Flexible Glass
Langmuir-Blodgett Films of a New Diels-Alder Adduct of C60 with 1,1’-Biindene
Preparation of Co4W6O21(OH)2·4H2O via Microwave Hydrothermal Method and its Reaction Process
Chapter 3: Polymer Materials
Luteolin Imprinted Polymer with Selective Recognition and Adsorption Performance
Study on the Preparation of Starch-Based Polyampholyte and Slow Release Performance
Cholesteric Cyclohexane-Containing Side-Chain Liquid-Crystalline Polysiloxanes
Preparation and Characterization of Fibri-Form Silica from Short Chrysotile Fibers by Mix-Roasting
Porous Poly(1-naphthylamine) Synthesized by Interfacial Polymerization
Chemical Structure Changes and Correlation Analysis of High Density Polyethylene after Natural and Xenon Aging
Chapter 4: Metallic Materials and Alloys
First-Principle Studies Al-Fe-Ti-Cr-Zn-Cu High Entropy Solid Solutions with Pressure-Induced
Ultrasonic Welding of Fe78Si9B13 Metallic Glass
Effect of Temperature on the Stress Corrosion Cracking of 304L Austenitic Stainless Steels in Alkaline Solution
Study on the Mechanical Properties of Single Crystal Aluminum by Ohno Continuous Casting
Experimental Study on the Segregation of Primary Silicon from the Hypereutectic Al-Si Melts in the Electromagnetic Directional Solidification
Microstructure Morphology and Mechanical Properties of Steel 30CrMnSiNi2A Irradiated by Continuous Wave Laser
Phase Transition of Ball-Milled Ni50-xMn37In13Cox (x=0,5) Alloy Powders
Studying on High Temperature Thermoplastic of High Carbon Steel
Research on Intergranular Corrosion Behavior of Welded Joints of Nuclear Grade Stainless Steel
Corrosion and Protection of 0Cr18Ni9 Stainless Steel Cooling Water Pipe in Power Plant
Acoustic Emission Response of 316LN Welded Joint during Intergranular Corrosion
BPW91 Method Used in Analyzing Electronic Structures and Magnetic Properties of Nin (2-13) Clusters
Study on the Development of Pretreatment Processes of Electroless Nickel Plating on Al Alloy Surface
First-Principle Studies of a High Entropy Solid Solution of AlCoCrCuFeNix with Different Mole Fractions of Ni
Electroless Fabrication of Nd-Fe-B/a-Fe Heterostructured Composite Magnets and their Magnetic Properties
Preparation and Research of a-Fe/Montmorillonite Magnetic Material
Effects of Ni/Co Metal Binder Phase on Mechanical Properties of Ti(C,N)-Based Cermets
Electrolytic Hydriding of La(Fe, Si)13 Based Materials and its Magnetocaloric Effect
Chapter 5: Composites
Effects of Duration on Wear Rate of a PTFE Composite
Microstructural Control of Al/Si Composites by Area-Selectively Liquid-Phase-Sintering Method
Low-Temperature Co-Fired Behavior of ZMT Dielectric Ceramic and NZC Ferrite Composites
The Preparation and Properties of SiO2-Al2O3 Composite Fluoride Removal Agent
The Effect of Phosphatic Composite on Magnesium Phosphate Cement Performance
Graphene Oxide/Cement Composites for Electromagnetic Interference Shielding
Chapter 6: Biomaterials
The Research for Microwave Modified Vermiculite Adsorption of Zn2+
Micro Patterning, Tension Force and the Growth of Osteoblasts
Synthesis and Characterization of Isobutyl-Chitosan-Ca(II) Complexes
Study on the Microstructure and Biocompatibility of Inositol Hexakisphosphate-Modified Titanium Surface
Novel Efficient Synthesis of Glycol Monoethers over Highly Active Tungsten-Containing Mesoporous Molecular Sieve SBA-15
Synthesis and Characterization of Biomedical Aliphatic Polyurethane Material
Heparin Modified Temperature-Sensitive Hydrogels and Biocompatibility Research
Chapter 7: Thin Film and Coating Materials
Study on Antioxidant Properties of the Carbon Fibers Coated with Oxide-Alumina-Silica Film
Studies on Mechanical and Optical Characteristics of TiN Films Deposited on Al, Ti Buffer Layers
Microstructure and Properties of Thermal Sprayed ZrO2-NiCr Coatings
Improved Photoluminescence and Vacuum Ultraviolet Irradiation Stability of Zn2SiO4:Mn2+ with MgF2 Nano-Coating
Preparation and Properties of Triazine Dithiol-Silane Composite Self-Assembled Hydrophobility Films on Stainless Steel Surfaces
Thermodynamic Analysis of Chemical Vapor Deposition of the VN Coating
Study on the (Fe,Cr)7C3 Particles Reinforced Iron-Based Composite Coating
Preparation and Properties Characterization of N-Doped TiO2 Film
Solution-Temperature-Controlled Growth of Microarc Oxidation Coatings on Aluminum Substrates
Research on HfSiN Diffusion Barrier Thin Film for Micro-Nanoscale ULSI-Cu Metallization
Corrosion Behaviors of Thermal Diffusion Coating on the Surface of Inconel625 Alloy in Chloride Molten Salts
Preparation and Research of the Anticorrosive Coatings with Copper Ions-Polyaniline Loaded Montmorillonite
Effects of NaBH4 and Heat-Treat on Corrosion Resistance of Electroless Plating Ni-B Coating
Influence of CNTs Concentration on the Microstructure and Electrochemical Properties of Ni-P-MWNTs Composite Coating
Preparation and Tribological Behavior of Ni-P-B4C Electroless Coatings
Preparation and Properties of Electroless Ni-P-ß-SiC Composition Coating
A Facile Method for Improving the Process of Porous Anodic Aluminum Oxide Film Preparation
Preparation of YBCO Thin Films by Metal Organic Deposition Method
Influence of Pulse Frequency on Mullite Coatings Prepared by Pulse Arc Discharge Deposition Process and Activation Energy
Microstructure Analysis and Preparation of B2O3-Modified ZrSiO4/SiC Oxidation Resistant Coatings
Preparation and Characterization of Tourmaline/ZnO Composite Thin Films by a Facile Wet-Chemical Route
Influences of Reaction Conditions on the Morphology and Properties of CaWO4 Films Prepared by Anodization
Three-Dimensionally Porous Polystyrene Films Fabricated via an Ultrasound Assisted Template Method
ZnO Thin Film Prepared by Two-Step Electrodeposition Method for Dye-Sensitized Solar Cell
Study of Xonotlite Architectural Coatings for Exterior Wall Insulation Mechanism
Study of Friction and Wear Behavior of Ni-P-ß-SiC Composition Coating on Aluminum Alloy
The Preparation and Characterization of Zeolite LTA Membrane with Microwave-Assisted Method
Anti-Corrosion Property of Atomic Layer Deposition Films for Anodized Aluminum
Chapter 8: Optical, Electrical and Sensing Material Properties
Up-Conversion White Emission of ß-NaYbF4:0.1%Tm3+,0.1%Er3+ under 980 nm Excitation
Synthesis of Sr4Al14O25:Eu2+, Dy3+ via Using Cyclodextrin as Chelating Agent by Sol-Gel Method
Study on the Electric Properties of Carbon Fibers and its Application for the Preparation of Carbon/Carbon Composites
Facile Synthesis of CaCo3 and CaCo3:Eu3+ Phosphors by Solid State Reaction at Room Temperature and the Luminescence Properties
Factors Affecting Optical Anisotropy Performance of Liquid Crystal Polymer with Photosensitive Group
Synthesis of Al Doped ZnO with a Novel Rice Microstructure by Hydrothermal Process and Analysis of their Gas Sensing Properties
High Response and Selectivity Methanol Gas Sensor Using Molecular Imprinting Technique
Stimuli Responsive Electrospun Fibres: Functions and Applications
Development of W/Cu Plasma Facing Component for Fusion Device
Influence of the Particle Size on the Rheology of Magnetorheological Elastomer
Dielectric Performance of (1-x)Na0.5Bi0.5TiO3-xBaTiO3 Lead-Free Piezoelectric Ceramics Synthesized by Sol-Gel Combustion Method
Structure Refinement and Dielectric Properties of Bismuth-Based Pyrochlores Containing Titanium
Chapter 9: Energy Materials
Si/SiO2 Composite Negative Electrode Material for Lithium Ion Batteries
Research on the Molten Nitrate Salt Thermal Properties Based on Solar Thermal Utilization
Recent Progress of Zn2SnO4-Based Dye Sensitized Solar Cells
Photocatalytic Activity of Solar-Light-Active N-Doped TiO2 by Sol-Gel Combustion Method
The Study of Carbon Materials Prepared by Zhaotong Anthracite under Ultra-High Temperature
Phase Transformation of Coal at High Temperature
Electrochemical Properties Test of Vanadium Electrolyte Containing V (III) and V (IV) Ion
Synthesis and Properties of Carbon and Yttrium Co-Doped TiO2 Photocatalyst
High-Rate Capability and Excellent Cycling Stability of Li3V2(PO4)3/C Cathode Material Prepared via Sol-Gel Combined with Ball Milling Method
Recent Development and Performance of LiFePO4 Material
Effects of Cu Contamination on the Electrical Properties of Multicrystalline Silicon Purified by Directional Solidification Route
Chapter 10: Natural and Environmental Materials
Application of Natural Minerals in the Catalytic Wet Air Oxidation (CWAO)
Preparation of TiO2 Photocatalyst Loaded Bentonite Material and Study of Catalytic Degradation
Preparation and Catalytic Properties of BaSb2O6 Photocatalyst
Highly Photocatalytic Properties Observed in 4ZnO·B2O3·H2O under UV-Light for MB, RhB and MO Degradation
Preparation and Properties of La and Fe Co-Doping TiO2 Photocatalyst
Modification of Hydrogen Zeolite with CeO2 and its Catalysis Application for Preparing Aspirin
Visible-Light-Induced Photocatalytic Activity of Boron-Doped BiVO4
Thermodynamic Analysis in Sintering Reaction of Coal Fly Ash with Alkali
Research of Citric Acid Modified Adsorption of Cr (VI) Properties of Activated Carbons
Study on the Formaldehyde Adsorption Kinetics of Dry Waters
RGO/BiVO4 with Photocatalytic Activity by a Hydrothermal Method
Effect on Catalytic Ability of Solid Super Acid SO42-/ZrO2-TiO2-SiO2-Al2O3 Modified by Y, La and Chitosan