Applied Materials and Technologies for Modern Manufacturing
Erscheinungsjahr 2013
ISBN: 978-3-03785-888-2
Verlag: Trans Tech Publications
Selected, peer reviewed papers from the Third International Conference on Applied Mechanics, Materials and Manufacturing (ICAMMM 2013), August 24-25, 2013, Dalian, China
Buch, Englisch, 3184 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 5800 g
ISBN: 978-3-03785-888-2
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preface and Conference Organization
Chapter 1: Composites
Influence of POSS Content on the Thermal Properties of PAN/POSS Nanofibers
Preparation and Flame Retardancy of Waterbased Phenolic Resin/Silica Hybrid Material Prepared by In Situ Polymerization
Effect of SiC and ZrO2 on Low Temperature Oxidation Resistance of MoSi2 Nanocomposites
Finite Element Analysis of Diamond Wire Saw Slicing SiCp-Al Composites
Simulated Sun-Light-Driven Degradation of Rhodamine B by Porous Peanut-like Sm-Doped BiVO4 Sub-Microstructures
Effect of Load on the Tribology Behavior of Cu-Based Self-Lubricating Composite
Structural and Tribological Properties of MoS2/Polyimide Composites Exposed to Atomic Oxygen Environment
Fabrication of Diamond-Structure Alumina Photonic Crystal with Rectangle Cavity Defect and its Microwave Properties
The Influence of Sintering Temperature on the Mechanical Properties and Microstructure of Carbon Nanotubes/Zirconia/Hydroxyapatite Biocomposites
Warm Compaction and Characterization of Paniculate Reinforced CSP/Al Composite Material
Analysis to Mullite Bonded Corundum Purging Plug
Effects of MAPE Modified on Physico-Mechanical Properties of Silvergrass Reinforced High Density Polyethylene Composites
Quasi-Static Out-of-Plane Compression of Hollow Integrated Woven Textile Sandwich Composites
Characterization of Cold-Sprayed FeAl/WC Nanocomposite Coating
Study on TiO2/Tourmaline Composite Photocatalyst Materials
Comparative Study on Design Schemes of Composite Holding Pole Structure
An Evaluation on Impact Performance of Light-Weight Composite Honeycomb Sandwich Panels
Effects of PMDI Treatments on Thermal Properties of Silvergrass Reinforced High Density Polyethylene Composites
Piezoresistivity of Polymer-Derived AlSiCN Ceramics
Efficient Analysis of the Electromagnetic Energy in Dispersive Composite Materials
Multifunctional Non-Woven Carbon Nanopaper: Fabrication, Properties, and Applications
Chapter 2: Micro/Nano Materials
Preparation of Continuous Electrospun Nanofiber Yarn with an Auxiliary Rotating Circular Plate
Current Automatic Control Technology for n-Type Macroporous Silicon Photo-Electrochemical Etching
The Influence of Surfactants on Crystallization of Nanocrystalline HZSM-5 Zeolite
Photocatalytic Activity of Titania Nanowire Arrays by Sol-Template Method
Fabrication Using Focused Ion Beam Processing of Devices Employing Silicon-Based Nanowires Synthesized by Vapor-Liquid-Solid Growth
In Situ Growth of Carbon Nanotubes on Carbon Foam for Enhanced Oil Adsorption
Synthesis and Characterization of Monodisperse Nanocrystalline HZSM-5 Zeolite
The Formed Mechanism of Pores in Plasma Sprayed Nanostructured Al2O3/TiO2 Coatings
Preparation of Nano WO3-Doped Materials and Optical Properties
Preparation and Characterization of CA-PEI Double Modification Water-Based Magnetic Fluid
Synthesis of Bismuth Nanoparticles by a Simple One-Step Solvothermal Reduction Route
Synthesis and Characterization of Poly(Methyl Methacrylate) -Grafted-Cellulose Nanofiber
Enhanced Photocatalytic Performance of Iodine Doped Bi2WO6 Nanostructures under Visible-Light Irradiation
Chapter 3: Iron, Steel, Metals and Metal Alloys
Influence of Zinc Content on Anti-Corrosion Performance of Zinc-Rich Coatings
Anti-Corrosion Performance of the Hot-Dip Coating Containing Zn-Al-Mg-Ce
Role of Aging Precipitates on Mechanical Properties of HNS with Different Nitrogen Content
Finite Element and Molecular Dynamics Multiscale Framework for TRIP Steel Macro and Micro Material Behavior Investigation
Thermodynamics Analysis of Microalloying Technology for Developing High Strength Cold Rolled Structural Steel Sheet
Intermediate-Temperature Oxidation of Fe-Cr-Ni-Mo Stainless Maraging Steel in Air
Investigations on the Fatigue Property of the High-Strength and Toughness 211Z Casting Aluminium Alloy
Critical Carbon Concentration and Excessively High Bath Temperature for Smelting Ferrochromium in the Argon-Oxygen Furnace
The Influence of Gd on AM60B Magnesium Alloys' Structures
Study on Corrosion Resistance of Carbon Steel/Stainless Steel Composite Pipe
Preparation of Ti3Al Based Alloy Expansion Part for Nozzle by Powder Metallurgy
Water Modeling Study on Removal of Inclusions in RH Degasser
Effects of Two-Stage Solution Heat Treatments on Microstructures and Properties of Cu-Cr-Zr Alloy
Thermodynamic Calculation of the Precipitate in Cu-Ni-Si-Co Alloys and Experimental Investigation
Establishment of Flow Stress Model of EW75 Alloy
Applying Research on Creep Constitutive Model of No.35 Steel Based on BC-BPNN
Investigation on Mechanical Properties of 6H-SiC Crystal
Research on Optical Properties of Ga1-xAlxN with Different Al Component
Porosities and Fatigue Property of Two A356 Cast Aluminum Alloy
Finite Element Simulation of Aluminum ECAP Material Flow
Perpendicular Magnetic Anisotropy in Fe/MgO Multilayer Film Measured by Magnetic Compton Scattering
Microstructure and Mechanical Properties of 40CrNiMo7 Steel after High Current Pulsed Electron Beam Treatment
Research on Microstructure Evolution Laws of Ultrafine Grained Metastable Automobile Steel
Effects of Different Alloy Composition on Magnetic Properties of Non-Oriented Electrical Steel
Effects of Different Alloy Composition on Phase Transformation of Non-Oriented Electrical Steel
Research on Thermo Effects of Silver Modified by High-Intensity Pulsed Ion Beam
Chapter 4: Polymer
Study on the Structure and Properties of the Low Melting Point of Nylon 6 Modified by Organic Montmorillonite
Studies on the Tensile Properties and Flow Performance of the Different Molecular-Weight Polycarbonate
Study on Adhesion Properties of Poly (sodium acrylate)-Polyvinyl Alcohol Super Absorbent Resin
Study the Wet-Absorb and Fast-Dry Properties of the Coolplus Fiber/Cotton Compound Fabrics
Study of the Mechanical Properties and Releasing Anion Capacity of Anionic Functional PET Fiber
Lifetime Prediction of Nitrile Butadiene Rubber Used for O-Ring Sealing
Study on Magnetic Polymer ICF Target Prepared by the Electroless Plating
Preparation of Magnetic Polymer ICF Pellet by the Electroless Plating
Experimental Study of Material Thickness Effect on Combustion Characteristic for Molded Polystyrene Board
Stress Wave in Gelatin from Temporary Cavity
Chapter 5: Biological Materials and Technologies
Identification and Monitoring Strategy of Macrophomina phaseolina from Imported Soybeans
Effects of Bcl-2, Bax and P53 Gene Protein Expressions in Gastric Cancer Tissue on the Apoptosis of Cancer Cells
Correlations of Bcl-2 and Survivin Gene Protein Expressions in Colorectal Cancer
Effect of 1-MCP and O3 on the Qualities of Dendrobium Officinale Storage
Regenerated Bamboo Fiber from Green Solvent
Anti-Aging Effects of Deoxyschizandrin in D-Galactose-Induced Aging Rats
Research and Preparation for Nanoemulsion of Macadamia integrifolia Oil
Cardioprotective Effects of Lignanoid against Doxorubicin-Induced Oxidative Stress in Rat
The Analysis on Composition and Structure of the Eri-Silk
Super-Hydrophobic Surface Manufacture on Pyrolytic Carbon via Electrostatic Spinning Method
Foamed Buffer Material Made from Fibers of Old Newspaper
Thermal Degradation of Hemp Treated with Guanidine Nitrate
Synthesis, Characterization and Properties of the IA / SAS Copolymer
Chapter 6: Optical Materials and Engineering
Influence on Red Long-Lasting Phosphorescence due to Different Doping Concentrations of ZnGa2O4:Cr3+
Influence on Afterglow Spectra due to Different Phases of Zn3(PO4)2: Mn2+
The Spectral Properties and Thermal Stability of
AlCr-AlCrON
Solar Selective Absorber Coating
Luminescent Properties of LiTaO3:Tm3+, Yb3+ Phosphors Prepared by Ball Milling Method
Synthesis and Characterization of Luminescent Properties of NaGdF4 Phosphors
The Mechanisms on the Transmittance and Photo-Catalytic Activity of TiO2 Film Doped with SiO2/PEG
Theoretical Study on Absorption Properties of InxGa1-xAs with Different in Component
On Antireflective Coatings with Stable Hydrophobicity for Solar Tube
The Temperature Field Caused by Sphere Inclusion in Dielectric Irradiated by Single Pulse Laser
The Temperature Field Caused by Sphere Inclusion in Dielectric Irradiated by Multi-Pulse Laser
Chapter 7: Chemical Engineering
Effects of Alkali Metal Content and Sintering Temperature on the Structure and Electrical Properties of (Na0.52K0.48) 0.94+xLi0.06-xNb0.94Sb0.06O3 Lead-Free Piezoelectric Ceramics
Synthesis of Light Olefins from CO2 Hydrogenation on Fe/ZSM-5 Catalyst
The Synthesis of Cadmium Sulfide and Cadmium Selenide Nanostructures
Removal of Carbonyl Compounds in Diesel Exhaust Gas by Direct Non-Thermal Plasma
Research of the Reactivity Photoacoustic Characteristics of PETN and HNS Induced by Laser
The Efficient Thermal Management of Proton Exchange Membrane Fuel Cells
Effect of Temperature on Decomposition of Magnesium Bicarbonate
The Phase Change Study of High Titanium Slag during Heat Treatment
Synthesis and Characterization of Thermoplastic Poly (ether-imide) Elastormer Based on Di-(4-Aminopheny)Methane-Pyromellitimide Unit
An Electrolyte Additive for Use in High-Voltage Lithium-Ion Batteries
The Influence of Technological Conditions on Cell Density and Cell Morphology of PPESK Microporous Material
Progress of Purification and Application of Barite
A Research on an Inner Core Replaceable Alkaline Batteries
Preparation and Characterization of Foaming Poly (phenylene ether ketone) PPEK by Using Supercritical Carbon Dioxide
Preparation and Characterization of Phloroglucinol-Resorcinol-Formaldehyde Carbon Aerogels
Synthesis and Polymerization Kinetics of PMMA in Imidazolium Ionic Liquids
Effect of Ce0.8Sm0.2O1.9 Interlayer on the Electrochemical Performance of LaBaCo2O5+d Cathode for IT-SOFCs
Atmospheric Pressure Non-Equilibrium Plasma Deposition with Retention of Functional Group
Effects of Sintering Temperatures on the Solid-Phase Synthesis of Lithium Vanadium Phosphate for Lithium-Ion Cathode Materials
Adsorption of Chloride Anion by Calcined Mg-Al-Fe Layered Double Hydroxides in Wastewater
Preparation of FePO4•2H2O with Flower-like Microstructure by a Facile Hydrothermal Synthesis Method
Study on the Preparing of Nanowhite Carbon Black by Silica Fume
Preparation of F, Cl and Nitrogen Doped TiO2and their Photocatalytic Properties Research
Review of Germanium Recovery Technologies from Coal
Thermal Degradation of Epoxy Resins Containing Aluminum Compounds
Effect of Liquefying Agents Mixed with Lower Alcohols and Reaction Temperature on the Microwave Driven Liquefaction of Wood
Preparation of Chitosan and Epichlorohydrin Cross-Linked Adsorbents and Adsorption Property of Dyes
The Application of Differential Scanning Calorimetry to Thermal Analysis for Energetic Materials
Influence of Cu Doping on the Thermoelectric Properties of Bi1.5Pb0.5Sr1.8La0.2Co2Oy
Molecular Dynamics Simulations of the Effect of Carbon Concentration on Silicon Carbide Crystal Growth
Application of Dividing Wall Column in Industrial Naphthalene Distillation: A Simulation Study
Chapter 8: Mineral Mining and Processing
A Evaluation on Pulverized Coal Combustion Properties Using a Thermogravimetric Analyze Method
The Adaptability Study for Developing Tight Gas Reservoirs Using Horizontal Wells
Reservoir Architecture Analysis of 8th Member of Lower Shihezi Formation in Sulige Gas-Field
The Study of Daqing Oilfield Class II Reservoirs Pore Throat Ratio Using Conventional Pressure Mercury Method
Simulation Experimental Study on the Permeability of Coal Rock in Deep Mine
The Performance Evaluation of Potassium Drilling Fluid System
Processing on Red Mud by Integrated Dealkalized Sintering with Magnetization
An Experimental Study on Fracture Conductivity Influenced by Sulfur Deposition
Practice of Fuzzy-Ball Drilling Fluid Technology in Qinping CBM Well 12-11-3H with Six Branch Holes
The Performance Evaluation of Solid Free Completion Fluid
The Effect of Gas Distributor Settings on the Separation Characteristics of Air-Dense Medium Fluidized Bed
Experimental Study on the Crushing Process of Granular Layer
Dehydration and Upgrading of Lignite with Microwave
Steam Injection Performance of Horizontal Wells Completed with Slotted Liners
Domestic and International Present Status and Utilization of Hafnium Resource
Numerical Simulation of the Effect of Cathode Materials on the Displacement in a 350 KA Aluminum Reduction Cell
Chapter 9: Materials Processing Technology
Microstructure and Mechanical Property Analysis of the Metal Part by SLM
Experimental Investigation on Surface Topography for PTMCs during High Speed Grinding
The Structure and Mechanical Properties of Me/MeN/TiAlN Trilaminar Coatings Deposited by a Hybrid PVD Coating Technique
The Protective Effect of the Intumescent Coating on the Fire Resistance Performance of Cable
Effect of Grain Growth Inhibitor on the Wear of Ultrafine Cemented Carbide Cutting Inserts
Effect of Low-Voltage Pulsed Magnetic Field on Solidified Structure of Superalloy K4169
Evaluation for the Light Transmission Property of Solar Glass
Chapter 9: Materials Processing Technology
A New Stretch-Forming Process Based on Loading at Discrete Points and its Numerical Investigation
Modeling and Prediction Research on End Mills Wear in Micro Turn-Milling Process
Calculation of Moisture Content and Drying Rate during Microwave Drying
The Experimental Study of Organizational Structure of Welded Joint and Combining Performance of Laser Welding of Vacuum Glass
Effect of RF Negative Bias on the Structure and Performance of Diamond-Like Carbon Films in ECR Plasma
Precision Measurement for Drill Helical Flute Curve
Determination of Elements in Carbon Fiber Using Inductively Coupled Plasma Mass Spectrometry (ICP-MS)
Failure Analysis and Remanufacturing of Construction Machinery Shafts by HVOF Technique
Model Adaptive Learning in Process Control of Strip Cold Rolling
Effect of Laser Fluence on the Growth of Mo Films Prepared by a Pulsed Laser Deposition Method
Welding Technology Research for the Train Bogie
Temperature Distribution Analysis of TIG Welding Process of Thin-Walled Stainless Steel and Red Copper
Investigating the Use of Nanoscale Bilayers Assembly on Stainless Steel Plate for Surface Hydrophobic Modification and Condensation
Experimental Study on Friction and Wear Behaviors of Carbon Rubbing against Copper Material under Electric Current
A Study of the Hot Cutting Technology to EPS Architectural Model
Research on Powder Stream of Coaxial Powder Feeding in Laser Manufacturing Technology
Study on Processing Technique in Engineering Tests of Mg-7.1Gd-4.6Y-1.3Nd-0.5Zr Alloy
Research on Coating Techniques of Locomotive Spring
Forward Slip and Backward Slip in Radial Ring Rolling Process
Microstructure and Microhardness Changes of 30CrMnSiA Steel Modified Surface Layers by Electrolyte-Plasma Processing
Research on Modeling and Simulation of Linearity Controlling in Gun Drill Machining
Selective Laser Melting Bone-Compatible Pure Titanium Porous Structure
The Preparation and Application of Special Performance Ornamental Alloy Coating on Plastic Substrate
Arrangement Characteristics and Wear Distribution of Wire Rope in Parallel Grooved Multi-Layer Winding
Effects of Annealing and Different Substrate Materials on Ohmic Contact Property of IGZO Films
Detecting Cold Weld Defects in HDPE Piping Thermal Fusion Welds Based on Microwave Technique
Analysis of Low Molecular Weight Components in Disposable Food Contact Materials
Preparation and Properties of Water-Borne Inorganic Zinc-Rich Coating in Hydraulic Engineering Metal Structures
Analysis of Interaction between HTHP Completion Packer's Slip and the Casing Wall
Methodology of the Experiment for Determination of Parameter Ra for the Methods of Finishing Machining
Resistance Spot Welding of Advanced High Strength TWIP Steels
Mathematical Model for Heat Transfer Simulation of Rotary Alumina Kiln
Fabrication of Functionally Gradient Ultrafine-Grained WC-Co Composites
Preparation and Dielectric Properties of La Doped Bi2Al4O9
Behaviors of Immersion Flow in Micro-Gap with Moving Boundary
Improvement for Bearing Ring Grinding Process Based on Six Sigma Methods
Energy Loss on High-Temperature Plasma Processing Waste Printed Circuit Boards
Acoustic Emission Characteristics of Sericite Schist Coarse Aggregates under Consolidated Undrained Triaxial Tests
Research on Landscape Limestone Damage and Deformation under Uniaxial Compression Based on Acoustic Emission
Study on Friction and Wear Properties of Water Lubricated Rubber Bearing
ECM Parameters Modeling and Optimization Using WSGA
Numerical Simulation on Upsetting Process of Large Forgings
Molecular Dynamics Simulations on Melting of Aluminum
Microstructure and Tribological Properties of Stellite21 Coating by Electro-Spark Deposition
Dynamic Response Analysis of Butt Joint of HTS-A Steel Considering Welding Residual Stresses
Performance Control Research of Oil Distribution Plate Parts by Laser Direct Rapid Forming Based on the Ultrasonic Vibration
A New Method Designed Crimping Technical Parameter Using Response Surface Methodology
Experiments of Rock Cutting with Nano-Cemented Carbide
Study on a New Forming Method of the Honeycomb Semi-Cell Structures
Optimization Study on the Tooth Profile of Gear Shaping Roller of Honeycomb Semi-Cell Structures
Effects of Air Bending Parameters on Spingback Using Finite Element Analysis
Chapter 10: Building Materials
Utilization of Phosphorus Slag and Fly Ash for the Preparation of Ready-Mixed Mortar
Application of Environmental Protection and Safety Bituminous Mixture in Tunnel
The Effects of Temperature on the Stiffness Modulus of Dense Graded Asphalt Mixtures
Compactability Analysis of Soil-Rock Mixture
Elastic Modulus of Concrete Cast with Recycled Aggregates
Effects of Recycled Aggregates on Water-Cement Ratio for Concrete
Using Red Mud Manufacturing Building Glass-Ceramics
Effect of Dosage and Modulus of Water Glass on AC Impedance Properties of Alkali-Activated Slag Cement Mortar
Modification Research on the Water-Resistance of Magnesium Oxychloride Cement
Experimental Research on Peridotite Concrete for Neutron Shielding
Study on Carbonization Test of Manufactured Sand Concrete
Applicable Fine Stream Sediments from Upper Chi River Produced Fired Clay Bricks
Synthesis and Property of Nano-SiO2/Silicone-Acrylate Emulsion Composite Coatings for Concrete Surface Protection
Study about Characteristics of Cement Paste on Fractal Theory
Analysis of Displacement Field of Asphalt Mixture in Uniaxial Compression Test
Research on Failure Criterion of Concrete under Multi-Axial Stress
Research on Fatigue Performance of Modified Asphalt Mixture in Intermediate Course of Pavement
Research on Concrete Strength Theory Based on Strain Space
Study Strength of Recycled Concrete Mix Design
Deterioration of Cement Pastes Containing Limestone Powder with Different Fineness Exposed to Sulfate Environment at Low Temperature
Analysis about the Properties Impact of the Recycled Aggregate which were Caused by Different Produced Methods and Original Concrete
Effect of Polycarboxylicacid Plasticizer on Characteristics of a-Calcium Sulfate Hemihydrate
Production Quality Control of Moderate Heat Portland Cement and Analysis of Application Effect in Roller Compacted Concrete
Effect of Age on Strength of Unfired Soil Lime Bricks Containing Non Uniform Coconut Fibers
Effect of Copper Slag on Properties and Structure of Cement and Concrete
Chaotic Characteristic Analysis of Concrete Fracture System Based on Lyapunov Exponent Stability Criterion
Dynamic Modulus Characteristic of Large Stone Permeable Asphalt Mixtures
Experimental Research on the Flexural Failure Properties of Green High Performance Fiber Reinforced Cementitious Composites (GHPFRCC)
Chapter 11: Construction Technologies
Dynamic Analysis of Large Dams in Frequency-Domain Based on Fourier SEM
Establishing and Checking the Temperature and Humidity Coupled Model about Asphalt Pavement Structure
A Review of Durability Research of Concrete Bridge
Study on Green Construction Evaluation Based on the Fuzzy Matter-Element
LS-SVM-Markov Model for Dam Deformation Prediction
Study on Probability Distribution of Ship-Bridge Collision Force Formula
Earthquake Damage Investigation and Analysis of Masonry Structure in Yuxi Village - The Macroscopic Epicenter of Ms 7.0 Lushan Earthquake
Research on the Formula of Polyaspartic Ester Polyurea Concrete Coating and its Application
Axial Compression Bearing Capacity Calculation of Hoop Reinforcement Concrete Column
Study on the Scope of Application of Cement Deep Mixing Pile to Consolidate Soft Soils
The Case Analysis of Building Collapse during the Decoration Process
Exquisite Representation in Peter Zumthor's Works
Peter Zumthor Ideas of Architectural Creation
Study on Elastic-Plastic Damage Constitutive Model of Frozen Soil Based on Energy Dissipation Theory
Crack Detection and Analysis of Long-Span Continuous Rigid Frame Bridges
Experimental Research on Compaction Standard of Subgrade for Low Liquid Limit Silt in Shanxi Area
The Construction of the SGW-Based Bar-Beam Elements
Analysis of the Plastic Extension of Parking Cracks on Casing after Testing
Fundamental Study of the Potential Application of Steel Fiber Reinforced Concrete to Enhance the Impact Resistance of Nuclear Power Plant Structures
Dynamic Simulation of Ballastless Railway Track System with Local Invalid Sleepers
A Study of New Type of Earthquake-Resistant and Crack-Resistant Block
Analysis of Shape Control Factors for the Overall Optimization Design of High-Rise Frame Shear Wall Structure
Key Points Analysis for Seismic Design of Super High-Rise Building
Analysis of the Mechanical Properties of Cement Silo Structure
The Time Domain Simulation of Non-Stationary Road Roughness
Geometry Optimization and Engineering Applications of Transmission Tower Foundation in the Slope
A Numerical Study of the Impact of Tunnel Depth on Surface Displacement in Shield Tunnel Construction
The Application of the Creep Model in the High-Speed Railway Subgrade Settlement Prediction Techniques
Study on Fatigue Features of Box-Shaped Cable-Girder Anchorage for Cable-Stayed Bridges with Steel Box Girders by Model Test
Simulation for Wind Pressure of Pedestrian Bridge Induced by Main Line Train
Research and Application of Building Enclosing Structure Used in Equipment Noise Control
The Application of Fiber Cement Slurry Used to Prevent and Block Leak
Effects of Stacking Sequence on the Dynamic Characteristics of Hybrid Sandwich Composites Plates
Analysis of the Influence of Anisotropy on Seepage Field
Numerical Simulation for Uplift Bearing Capacity and Affecting Factors of the Digging Piles in Slope Ground
Study on the Friction Transfer Rule of Piles in the Slope under the Vertical Load
Experimental Research on Shrinkage Properties of Cement Stabilized Iron Tailings Sand Mixture
The Practical Probability Analysis Methods for Stability of Landslide
Study on Damage Characteristics of Reinforced Concrete Structure for Internal Explosion
An Inductive Method for Soil Mechanics
Stability Analysis of Jointed Rock Slope Using Shear Strength Reduction Approach
Submarine Slope Stability Evaluation Based on Strength Reduction Finite Element Method
Seepage Numerical Simulation Methods of Hard Fractured Rock Mass
Study on the Effects of Microwave Pretreatment on the Fire Retardant Permeability of Fast-Growing Wood
The Effect of Alkali Treatment on Wood Crystalline Structure and Micro-Structural Model
Calibration of SWAN Model for Wave Simulation in Bohai Sea
Numerical Simulation Analysis on Interaction among Underground Structure, Shear Connectors and Retaining Piles
Chapter 12: Environmental Engineering and Land Planning
Qualitative and Quantitative Integrity Evaluation of HPHT Gas well Containing Sour Gas
Research on Coagulation/Sedimentation Process for Fluoride Removal in Simulation Wastewater
Establishment of Ecological Security Pattern for Suzhou National New & Hi-Tech Industrial Development Zone
Exploring the Relationship between Industrial Economic Growth and Environmental Pollution - An Empirical Analysis Based on Cointegration and Granger Causality Test
Development of Rainwater Purification and Reclaimed Water Treatment Systems Using a High-Efficiency Air-Cooled Ozone Generator
Derivation of Optimum Treatment Conditions per Heavy Metal Contamination for Electrical Membrane and Convergent Process Apparatus in Electromagnetic Field
Numerical Modeling of Oil Spill with Tidal and Wind-Driven Coupled Model in Bohai Bay
Study on Spatial Characteristic in Micro Level of Rural-Urban Construction Land Expansion Based on the GWR Model - A Case Study in Tonglu County of Zhejiang Province
A Novel Integrated Rainfall-Runoff Model Based on TOPMODEL and Artificial Neural Network
Comparative Study on the Drying Process and Fractal Dimension of Sewage Sledge: Microwave and Air-Blast
Adsorption of Fluoride Ions from Drinking Water Using Glass Derived Porous Hydroxyapatite Scaffolds
Applicability of Modified TOPMODEL in the Arid Zone and the Humid Zone
Geochemical Speciation Associated to Brine and Groundwater
Chapter 13: The Basic of Mechanics and Research Methods
Stress Simulation Analysis of Bundling Wire Based on ANSYS
Thermodynamics Coupling Analysis of Grid-Controlled Electron Gun
Exact Solution of Stress and Radial Displacement of Elastic Tapered Interference Fit
Pressurizer Modeling: Using Different Thermodynamic Models and Comparing Results with RELAP Code Results
Studies on Several Problems of Rotary Impact
Internal Force Evaluation of Non-Uniform Beam in Portal Frame
Research on the Motion Mechanism of Offset Press's Ink Roller
Study on Hydraulic Fracturing Affected by Horizontal Principal Stress
Chapter 13: The Basic of Mechanics and Research Methods
Dual Variables System Analysis for Timoshenko Beam
Chapter 14: Dynamics, Vibration and Noise
The Effect of Nonlinear Isolator on Diesel Engine Vibration Isolation System
Analysis of the Dynamic Characteristics of the Feeding Stage with Different Guideway Systems
Asymptotic Behavior of a Chemostat Model with Watt Type Functional Response and Variable Yield
Hermetically Metal Sealing Random Vibration Damage Mechanism and Fatigue Life Prediction
Analysis to Earthquake Resistant Behavior of Composite Steel Plate Shear Wall Based on ABAQUS Software
Random Vibration Analysis of Grid-Controlled Electron Gun in High Power TWT
Parametric Design and Modal Analysis on Four-Order Elliptical Gear
The Analysis of the Flutter Region of Wind Turbine Blade
Research Modal Analysis Method of MW Wind Turbines
Theoretical Analysis of Seismic Response for Marine Drilling Risers
Influence of Axis Curvature Radius on New Annular MEFP
Random Response Analysis of Vibration Transfer Path Systems with Translational and Rotational Motions
Dynamic Performance Analysis of Steel Truss Bridge
Research Overview of Full Aero-Engine Dynamic Response Caused by Blade-Off
Monitoring and Analysis of Historic Building Vibration Influenced by Blasting in Complex Urban Environment
Statistical Energy Analysis of Subway Wheel/Track Noise
Analysis of Damping Force Changing with Temperature for Self-Feedback-Friction Damper
Experimental Research on the Levitation Support Way of Ultrasonic Thrust Bearing
Dynamic Response Analysis of Start-Up Transient in Air Conditioning System
Random Response Analysis of a Large-Size Cooling Tower Subjected to the Stationary Earthquake Motion
Dynamic Properties of Machine Bolted Joints Summary
Experimental Study on the Performance of the Laminated Steel Isolators
Chapter 15: Solid Mechanics
Modeling and Simulation of Horizontal Single Head Screw Conveyor with Different Fill Levels and Rotational Speed Based on EDEM
An Application of the Maximum Shear Strain Increment in Searching Sliding Surfaces
The Damage Mechanics Model of the Wellbore Surrounding Rock Based on Fractal Theory
Boundary Element Method for Crack Analysis in Two-Dimension Anisotropic Solid
The Influence Area of a Supersonically Expanding Spherical Inclusion
Mechanical Component Reliability Calculation through Multi-Plane Combination Method
The Scattering Waves by Two Spheres in Solid
Further Study on the Net Shear Strain Energy Density Theory
Research on Dynamic Compression-Shear Behavior of Closed-Cell Aluminum Foam
Improved Transfer Matrix Method in Analysis of Cylindrical Shell with Partially Covered Constrained Layer Damping
Nonlinear Response and Fatigue Life of Thin Plates Subjected to Non-Uniform Temperature Distributions and Acoustic Excitations
Equilibrium of a Thick-Walled Sphere of Inhomogeneous Nonlinear-Elastic Material
Chapter 16: Fluid Mechanics
Analysis and Simulation of the Fluid Field in Thermal Water-Jet Nozzle Based on ANSYS FLUENT & ICEM CFD
A Survey of Fluidic Thrust Vectoring Nozzle by Numerical Analysis
Static Force Measurement Technology Wind Tunnel Test
Application of Conjugate Heat Transfer in Multidisciplinary Design Optimization of Internal-Cooled Turbine Blade
Numerical Simulation of Cross-Flow around Four Square Cylinders in a Square Configuration at Low Reynolds Number
Aerodynamic Analysis of Inflatable Membrane Aeroshell
Numerical Simulation of Boiling Flow in LNG Releasing Underwater Process
Water Coning Simulation Mode in Fractured Gas Reservoir with Bottom Water
The Research of the Seepage Regularity of Power-Law Fluid under Porosity Scale
Calculation of Regular Longitudinal Wave Force in MMG Model Based on CFD
Study on Water Spraying System in Wet Electrostatic Precipitator
Application of Particle Finite Element Method in Axially Symmetric Fluid-Structure Interaction Problems
Buoyancy-Induced Convection in a Square Enclosure Discretely Heated at One Side and Cooled either at the Top or at the Bottom Using both Gases and Liquids as Working Fluids
Numerical Simulation of Rayleigh-Taylor Instability with Large Density Ratios Based on RKDG Method
On the Treatment of Neumann Boundary Conditions in Collocation-Based Meshless Methods
Numerical Simulation of Flow Characteristic in Microchannel between Parallel Flat Plates
Chapter 17: Biomechanics
Feasibility Analysis of Laboratory Emulation Study on In-Run Phase of Freestyle Skiing Aerial Athletes
Analysis of Risk Factors for Military Parachuting Injuries among Chinese Air Force Cadet Pilots
Biomechanical Response of Upper Limb Fracture in Real-World Truck-to-Pedestrian Accident Using THUMS (Version 4.0)
Picomol Assay of Nitric Oxide Screening in Biological Samples by Derivatization Combined with High-Throughput Microplate Format
Research on Negative Pressure Wall Climbing Absorption System Based on SMA
The Correlation Research of Insects Song Sound Quality and Nano-Mechanical Characteristics
The Correlation of Crickets Rubbing Wings Nano-Mechanical Properties and its Friction Sound Characteristics
Chapter 18: Product Design and Innovative Design Methodology
Reconfiguration Modules Based Displacement Group Propagation
Structural Synthesis of Spatial 4-Link Mechanisms for Coil Winding
Structural Topology Optimization Method Based on Bone Remodeling
Research Progress of 3D Style Design Based on Sketching
Joint Purchase Service System Research Based on User Needs
Analysis of Young Women’s Lower Limb Shape Based on 3D Body Measurement
Technological Research on CPC Product Development Process Based on Extenics
Manufacturability Analysis of Integrated Product Based on Feature Mapping
The Electric Vehicles Developing in Taiwan-Application of Scenario Analysis
Cycling Comfort Levels for Recumbent Exercise Bicycles
Research on Commercial Vehicle Clutch Release Bearing Fatigue Life Prediction Model
Analysis of Process Parameters Influencing V-Bending Based on Dynaform
Resistance Spot Welding Gun System Development Based on C# and Solidworks
Development of Parameterized Simulation and Analysis System for Cylindrical Gear Based on VC++ and ANSYS
The Research on Tool-Database Turning Stone Based on Pro/Toolkit
Tool Path Planning for NC System in Line Contact Machining
Modeling and Simulation of Kinematics for Planar R-RRR-RRP Mechanism Based on Assur Rod Group Theory
Effect of Cracked Blade Distribution on Strength of Centrifugal Impeller
Finite Element Analysis of the Spindle Box Structure of Large CNC Machine Tool
Computer Simulation of Filling Process and Temperature Distribution of Oil Pump Cover in Solidification Process
CAD Model Reuse Based on the Integrate Design History
Chapter 19: Design of Machinery and Mechanisms
The Method of the Residual Life Prediction of Pressure Vessel Defect Based on Defect Failure Rate Inflection Point
Simulation Investigation on Multi-Unit Parallel-Flow Type Condenser with Flat Tubes Distribution
Sliding Sleeve Fracturing Strength Analysis of the Ball Based on Ansys Workbench
Design and Experiment on Flank Type of Cropland Plot Breeding Wheat Drying Car
Finite Element Analysis on Telescopic Suspension Arm of Dirt-Removing Crane Based on ANSYS
The Improved Design of Machine Tool Structure Based on Sensitivity Analysis
Structural Optimization for Upper Beam of Isothermal Hydraulic Press
A Method to Reduce Calculation Time for a Study of a Damper Plate in a High Speed Hard Disk Drive Simulation
The Application of Slip Joint Use in Space Frame Structure for Vehicle
Fabrication of Deep Tapered Perforation Using a Modified through-Mask Electrochemical Micromachining
Research on SHCCT of Weather Resisting Plate for Vehicle
The Processing Techniques of Common Guide Rod Used in Mines and its Jig Design
The Strength Analysis and Structure Optimization of Packer Slip Based on ANSYS
Practice and Analysis of Life Measuring Device for Motor Valve
The Fuzzy Reliability Calculation for Cylinder Liner Wear Life of Internal Combustion Engine
Design of Injection Mold for a Large LCD TV Panel
The Design of Emergency Self-Rescued Helmet for the Earthquake
Optimization Design of a New Safety Structure of Plate-Fin Heat Exchanger Using Genetic Algorithm
Research on Contact Strength between Roller Screw Pair on Hoisting Mechanism Applied in Deep Sea Crane
Development of Electrolyte Vacuum Surface-Boiling Electrodeposition Apparatus
Design of Autoclave Process Water Heat Recovery System
The Torque Research for Permanent Magnet Coupling Based on Ansoft Maxwell Transient Analysis
Study on the Z-Source Inverter with Low Voltage Stress
Study on Different Connection Types of Air Spring
Analysis and Comparison of Seal Ability of Premium Tubing Connections under Axial Alternating Load
Research on Bearing Characteristics of the Digging Foundation in Slopes Based on Interface
Study on the Recycling Machine of Plastic Film with Shovel-Excavation Screening
Numerical Simulation Study of the Impellers of the Centrifugal Pump Based on Different Turbulence Models
The Numerical Simulation Research of Disk-Type Molecular Pump Based on DSMC Method
Modified MRAS Speed Controller for Direct Torque Controlled Sensorless Induction Motor Drives
Design and Research of Wind Tunnel Test for Deflectable Nose
Plasticization of Trunk Lid and Molding Parameter Optimization
Diode-Pumped Yb:YAG Thin Disk Laser with a Novel Multi-Pass Pump and Cooling Arrangement
Simulation and Analysis the Internal Flow Field of Control Valve Bonnet Leakage
Optimal Design of the Fluid System on Special Fuel Filling Equipment
Motion and Evaporation Characteristics of Ethanol Droplet in High Temperature Nitrogen Environment
Thermal Simulation of Cooling Channels in Proton Exchange Membrane Fuel Cell
The Design of High Power LED Headlamp
Diamagnetic Magnetization Strength as a Consequence of Electromagnetic Induction Law’s Effect
Design of Micro Power Self-Generation Device
The Applied Research of the Super Capacitor in the Maximum Power Tracking of Photovoltaic Systems
A New Fatigue Life Calculation Method Based on Non-Linear Cumulative Damage Theory
Modeling and Real-Time Simulation on Doubly Fed Induction Wind Generator
Dynamic Characteristics of a Horizontal Milling Machine with Hybrid Guideway Systems
Evaluation of Sphericity Error Using Differential Evolution Method
Chapter 20: Industrial Engineering and Production Operations Management
Capacity Buffer Design for Critical Equipment Caused by Unexpected Production Mission
On the Modern Service Industry to Separat from the Manufacturing Industry in Hebei Province
The Construction Safety Accident Emergency Decision Support System Based on Ontology and CBR
Customer Value Assessment towards Transport Modes of Tourism after a Natural Disaster of Scenic Spots - The Analysis Based on Choice Experiment
A Study of Environmental Risk Comparison Based on Set Pair Analysis Theory
Research on Capacity-Constrained Manufacturing/Remanufacturing Hybrid System with Outsourcing
Supply Chain Modeling Based on Multi-AGENT Research
Performance Evaluation of Green Supply Chain Based on Catastrophe Progression Method
A Heuristic Algorithm for Integrated Surplus Inventory Matching Problem in Steel Enterprises
A Modified Genetic Algorithm for Total Processing Time Minimization in the Manufacturing Process Planning Problem
An Evolutionary Game Model of the Establishment of Tracebility System in Food Supply Chain
Decision Making and Economic Analysis for Accelerated Bridge Construction
Introducing Project-Based Learning to Design Enterprises for Creativity
Scheduling Problems with Human and Machine Effects
The Empirical Research about the Impact on the Accounting System Changes to Earning Quality - Taking Manufacturing of a-Shares as an Example
Dynamic Context-Aware System Based on Multi-Level Material Data Control Model
Coordinated Joint Development of Manufacturing and Morden Logistics
Single-Machine Scheduling with Resource-Dependent Learning Effect and Deteriorating Jobs
Material Data Integration Model Based on Context-Aware within Manufacturing Enterprises
Modeling and Scheme Generation of Dynamic Flexible Job-Shop Scheduling
Research on Strategy of Dynamic Flexible Job-Shop Scheduling
Equilibrium and Non-Equilibrium Solution of Nonlinear Population Evolution Systems
Industrial Process Measurement and Control Equipment Reliability Analysis Based on Physics of Failure
Chapter 20: Industrial Engineering and Production Operations Management
Innovation in Low Carbon Printing & Packaging
Research on Technology Integration Innovation Platform Performance Evaluation
Study on Evaluation and Optimization of Major Scientific Research Projects
The Impact of Recovery Strategies on Brand Trust after Production Operations Management Failure
ATC Estimation Approach Applying Co-Evolutionary Strategy
Application of Fuzzy Mathematics in Selection Air Flow Regulating Program
Study of Gas Emission Quantity Prediction Based on Chaotic Time Series
Chapter 21: Sensor Technology
A Frequency Modulation GMI Magnetic Sensor Base on Inverter Multivibrator with Longitudinal Excitation
Research on Temperature Compensation Method of Quartz Flexible Accelerometer
A New Electrochemical Host-Guest Recognition Sensor for DNA Detection
Optimization of a Novel Micro-Hotplate for Gas Sensor
Experimental Research on Spiral Macrobend Loss of Multimode Fibers
A New Electrochemical Sensor for DNA Detection Based on Au Nanoparticles Surface-Modified with ß-Cyclodextrins
An Improved Hall Vehicle Speed Sensor Detection System
Chapter 22: Technologies of Measuring, Testing and Monitoring, Data and Signal Processing
Aeroengine Exhaust Gas Temperature Prediction Using Process Neural Network with Time-Varying Threshold Functions
Health Condition Prognostics of Complex Equipment Based on Discrete Input Process Neural Networks
Aeroengine Exhausted Gas Temperature Prediction Using Process Extreme Learning Machine
Study on the Intelligent Software Testing Systems for Axles
Study on Sulfur Compounds in the Gasoline
The Infrared Diagnostic Technology of Power Transmission Devices and Experimental Study
Design of Indoor Harmful Gas Monitor System
Research of the Elevator Monitoring System Based on the Internet of Things
Blade Inspection System
Research on Crater Wear Monitoring in Turning
Study on Development Trend of Intellectualization of Condition Monitoring for Port Logistics Machinery in Western China
Technology of NC Machine Error Parameter Identification Based on BP Neural Network
Fabric Weave Pattern’s Recognition Based on Texture Orientation Features
Researching Metrology System on the Basis of Laser Tracker
Design of Measure and Control System of the Ring Block Casing Wear Tester
Employing Remote Mobile Scheme to Control Work Area via an Integrated Wireless Network
Optimal Sample Size Allocation for Multi-Level Stress Testing under Progressive Hybrid Interval Censoring
The Hardware Design of Ultrasonic Flaw Detector Based on Single-Chip Microcomputer AT89C52
Bulk Unloading Crane Monitoring System's Design and Development Based on Kingview
A Multi-Degree of Freedom Laser Scanning Simulation Platform
Research and Implementation of Positioning System Based on Ultrasonic
EEMD-ApEn Applied in Power Quality Detection and Classification
Advances in Data-Driven Monitoring Methods for Complex Process
Research of Snow-Degraded Image Clearness Methods
The Technology Research for the Extraction of Human Eyes Feature
Study on Signals Processing in State Detection of Tunnel Excavation Equipment's Cutter Head
Application of Wavelet Denoising Algorithm in Nondestructive Testing Based on LabVIEW
Ultrasonic Testing Signal De-Noising Processing Based on Orthogonal Matching Pursuit Algorithm
Research on De-Noising Technology in Ultrasonic on-Line Detecting System
A Simple Method for Data Processing of Surface Dynamometer Card
Fault Diagnosis of Bearing Based on Selective Ensemble of Multiple Fuzzy ARTMAP Neural Networks
Study on Thermogravimetry Data of Cooking Oil Tar Based on Adaptive Wavelet Analysis
Research on the Algorithm of Adaptive Loop Filter Based on Flexible Quadtree
Research of Vector Hydrophone Adaptive Signal Processing
Research on Virtual Simulation Technique Based on Shader
New just-Noticeable-Distortion Model Based on the Depth Information and its Application in Multiview Video Coding
Research on Panorama Generation Based on Homography Estimation
An Enhanced NAS-RIF Algorithm for Blind Image Restoration Based on Total Variation Regularization
Sub-Pixel Edge Detection on the Product Line
Vision Measurement for the Pose of Cannon Barrel
Faulty Insulator Diagnosis for UAV Videos Based on Repetitiveness Feature
Hybrid Algorithm for Face Recognition Using an Evolutionary Software Engineering
A Vision-Based System for Power Transmission Facilities Detection
Non-Destructive Testing Device for Hot Forming High Strength Steel Parts Based on Barkhausen Noise
The Design of High-Precision Temperature Measurement System Based on C8051F350 and PT100
Research of Smart Composite Insulator with Optical Fiber Bragg Grating
Extraction of Optimal Contour Dominant Points Based on ICT Images in Reverse Engineering
An Automatic Testing System Design for Accelerometer Based on LabVIEW
Study of InSAS Interferogram Filtering Based on Lattice Boltzmann Method
Automatic Point Clouds Registration Method Based on Mesh Segmentation
Image Matching Application Based on Modified SURF Algorithm
The Analysis of Sporopollen Data Based on Fuzzy Mathematics
Ceramic Microstructure Image Segmentation by Mean Shift
Three-Dimensional CT Imaging with Volume Rending of Separating Fusing, Opacifying and False-Coloring Technique
The Experimental Research on the Static-Loaded Beam Based on the Artificial Neural Network Technique
An Insect Song Signal Feature Extraction Method Based on the Wavelet Packet Analysis
Chapter 23: Electronic Engineering, Embedded System and Information Technologies
Video Transmission Control System Based on 3G Wireless Network
Study on Data Transfer Mode of Port Logistics Operating Machinery Based on Industrial Ethernet
Hardware Circuit Design for Direct-Coupled SVG
Research and Implementation of Lithium Primary Battery Management System for Mine Rescue Equipment
Design and Simulation of Testing Circuit for Radio Frequency Chip
Design of High Power RGB White Light Emitting Diodes
The Application of Data Radio Broadcasting Station Base on GPRS
Remote Communication System for Transmission Line Monitoring Based on CMA
Spontaneous Radiation Energy of Current Filaments in GaAs Photoconductive Semiconductor Switches
Design of Outdoor Unit for Wireless Microwave Transmission System
A New Routing Method Based on Hybrid Algorithm
Ethernet Controller and Serial Interface Conversion Technology Based on FPGA
Modified BP Neural Network Model is Used for Odd-Even Discrimination of Integer Number
Complete Design of Circuit Board Based on Altium Desinger Summer 09
Analysis of a New Design of FSS
Study of System Modeling and Simulation Based on Mixed Domain for Analog-Digital Mixed SoC
Research of the IT Capability Maturity Model and its Extension Evaluation of Smart Grid
Dynamic Delegation Approach in the Electronic Evidence Storage of Cloud Platform
Conflict and Hidden Trouble of Distributing Misplay at Memory Resources
Interest Mining Algorithm Based on Blog Information
Research on Information Processing Technology of Title Bar for AutoCAD/ERP Integration
Increase the Innovation Dynamics by Information and Communication Technology (ICT): Examples of E-Government
Algorithm Design of Gravity and Magnetic 3D Parallel Inversion Based on Multithreading Technology
Research of IPv6 Evolution Technology
The Design of Distributed File System Based on HDFS
Design and Development of EOS/MODIS Satellite Data Automatic Download Robot
The Auto-Design Network Platform of Synthesis Mining Curve Based on J2EE
Buddy Algorithm Optimization in Linux Memory Management
Towards an Entity-Based Scientific Metadata Schema
Towards a Semantic LaTeX for Managing Scientific Knowledge
RETRACTED: Analysis of a System
Study on the Storage of Chinese Character Font Library and Graphics Library on SPI Flash Chip
Chapter 24: Mechatronics, Robotics and Control, Automation of Manufacture
The Accuracy Analysis of Parallel Mechanism Assembly Robot
Design and Simulation of Five-Fingered Hand with Linkage Mechanism
The Development of Special CNC System for Profiling Lathe Based on Digital Capture Measurement
Real-Time Solution of Inverse Kinematics for 6R Robot Manipulators Using Digital Signal Processor
Research on the Double-Loop Robust Control Technology for the Electric-Hydraulic Servo System
Gait Transition of Quadruped Robot Using Time Sequence Control Based on Finite-State Machine
Control System of Tension Test for Spring Fan Wheel Assembly
Full Software CNC System Based on RTLinux
The Multi-Model Predictive Control Method Research on the Outlet Temperature Control of Hot-Blast Stove
Project Donaxi@HOME Service Robot
A 3-DOF Controlled, High-Speed, High-Precision Local Actuator for Micro Electrical Discharge Machining
Study on Improved Fuzzy Immune PID Controller for Maglev Transportation System with Track Irregularity
Application of Internet of Things in Monitoring System of Intelligent Building
Control Algorithm Analysis of Rig's Electro-Hydraulic Proportional Control System
Research and Implementation of Speed Controlling Algorithm on Intelligent Racing Car
A Method of High Accuracy Control for Motor-Based Photoelectric Tracking Instrumentation Base on Inclinometer
Design and Simulation of the Intelligent Control of the Greenhouse Temperature
A Framework of an Intelligent Process Planning System for Milling Based on STEP-NC
Coordination Control for RBS and ABS
Research on High Power Direct Drive Differential Volume Control Electro-Hydraulic Servo System
A New Direct Algorithm for Pole-Placement by State-Derivative Feedback for Single-Input Linear Systems
Research on the Key Technology of Automatic Programming System for Line-Contact Processing
Freeway Ramp Metering Based on Cell Transmission Model and Single Neuron
Research on Electro-Hydraulic Proportional Self-Tuning Fuzzy-PID Control System Based on MATLAB
Research on Control Scheme of Daul-Cyinder Reverse Synchronous Hydraulic System
Application Research on Learning Strategy Control of Daul-Cylinder Synchronous Movement
The Electronic Control System of Automatic Optical Scissors and Optical Tweezers
The Research and Application of Particle Swarm Optimization in Parameter Tuning on PID Controller
Dynamic Infrared Scene Simulation Study Based on DMD Imaging System
Digital Automatic Assembly Technology of Stubble-Cutting Equipment of No-Till Planter
Chapter 25: Engineering Education
Benchmarking the Industrial Expectations of Civil Engineering Students through Internship Placements
Java Course Teaching System Based on Practice and Innovation Ability Training
Research on the Evaluation of Cost-Effectiveness of Universities
Optimal Model of Predicting the School Effectiveness of Universities
Study on Evaluation Methods of Disciplines in Universities
Study on Manufacturing Practice Platform Construction of Mechanical Industrial Design
Chapter 26: Related Themes
Comparison Analysis of Train Derailment between Bridges and Lines
Applicability Study on Simulating Interference of Mixed Traffic at Signalized Intersections Using VISSIM
Study of Chinese Tourism Planning towards Cultural and Regional Integration
The Urban Road Short-Term Traffic Flow Prediction Research
Study on Numerical Simulation of Secondary Dust Deposition Phenomenon
Cause Analysis of the Various Shapes of Leaves and Estimate the Actual Weight of the Leaves
Facial Diagnosis of CHB Clinical Syndromes Based on Computer Technology
Family House-Purchase Decision Model Based on Analytic Hierarchy Process
