Sonstiges, Englisch, 4560 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Sonstiges, Englisch, 4560 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
ISBN: 978-3-0357-1926-0
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Annealing Textures of Thin Films and Copper InterconnectsImpact of a Combined Use of Focused Ion Beam Technique and Transmission Electron Microscopy on Materials CharacterizationNovel Properties of Nanostructured MetalsA Unified Technology Combining Plastic Forming and Heat Treatment of SteelsStructural Refinement of Interstitial Free (IF) Steel by Deformation and Phase TransformationGrain Refinement and Mechanical Properties of a Metastable Austenitic Fe-Cr-Ni-Mn AlloyCharacteristics of Deformation-Enhanced Transformation in Plain Low Carbon SteelCorrosion Resistance of Si and Al-Bearing Ultrafine Grained Weathering SteelEvaluation of Corrosivity in Atmospheric Environment by ACM (Atmospheric Corrosion Monitor) Type Corrosion SensorContinuous Cooling Transformation Temperatures and Microstructures of Niobium Bearing Microalloyed SteelsControl of Martensitic Morphology in Thermal-Mechanical Processing of Ferrous AlloysCharacterization of Kinetics of Deformation-Enhanced Transformation in a Low Carbon SteelStudy on Microstructures and Mechanical Properties of B510L Steel by TMCPMicrostructural Evolution and Mechanical Properties of Modified 9%Cr-1%Mo Steel upon Isothermal Heat-TreatmentFormation and Control of the Acicular Ferrite in Low Carbon Microalloying SteelEffects of the Finish Rolling Temperature on Mechanical Properties and Microstructure Evolution of Line Pipe SteelMicrostructures and Properties of a Bainite and Martensite Dual-Phase Cast Steel Fabricated by Combination of Alloying and Controlled Cooling Heat TreatmentStrengthening and Toughening Mechanisms of the Microalloying Non-Quenching and Tempering SteelTEM Observation on Nano-Precipitation of Plain Low Carbon Steel by CSPStrain-Induced Precipitation of Nb(CN) during Deformation of Undercooled Austenite in Nb-Microalloyed HSLA SteelsDistribution of Mo at Grain Boundary of 1300MPa CrMo SteelThe Mechanism of Intragranular Ferrite Nucleation on Inclusion in SteelSubsurface Microstructure Evolution of Hadfield Steel under High Impact EnergyEvolution of Microstructures in a Low Carbon Bainitic Steel during ReheatingDislocation-Precipitate Interaction and Its Effect on Thermostability of Bainite in a Nb-Bearing SteelThe Aging Behavior for Low Carbon Bainitic Steel Bearing Cu-NbSurface Nanocrystallization of Low Carbon Steel Induced by Circulation Rolling Plastic DeformationMicrostructures and Microhardness of SNCed Medium Carbon Low Alloy SteelsUltra-Fine Grain Size by Dynamic Recrystallization in Strip Rolling of Nb Microalloyed SteelContinuous Dynamic Recrystallization of AISI 430 Ferritic Stainless Steel by Hot Torsion DeformationDynamic Recrystallization of Ferrite in a Low Carbon Nb-Microalloyed SteelStudy on Recrystallization Behavior of High Strength Automobile Steel Sheets Produced by CSPModels for Static and Metadynamic Recrystallisation of Interstitial Free SteelsThe Effect of Deformation Temperature on the Recrystallization Behavior of AISI 304 Stainless SteelTexture Developments during Ferrite Refinement through Deformation-Enhanced Ferrite Transformation and Dynamic Recrystallization in Low Carbon SteelPrediction of Flow Stress and Microstructural Evolution during Hot Forging of Three Microalloyed Medium Carbon SteelsEffect of Initial Structure on Recrystallized Austenite Grain Size of Fe-32%Ni AlloyEffect of Austempering Process on the Properties of TRIP-SteelInfluences of Severe Deformation and Alloy Modification on Secondary Hardening and Fracture BehaviorSurface Age-Hardened High Speed Steel with High Co Content Formed on Undecarburized Carbon SteelEffect of Aging Treatment on High Temperature Strength of Nb Added Ferritic Stainless SteelsEffect of Ti on Formability of IF SteelsWear Behavior of an Austempered Ductile Iron Containing Mo-Ni-CuEffect of Heat Treatment on the Thermal Expansion Coefficient of Austempered Ductile IronThe Effect of Si on the Toughness of High Strength Mn-Si-Cr Series Bainitic SteelsThe Effects of RE-Mg on Thermal Fatigue Resistance of Cast High Speed Steel (HSS) RollsEffect of Thickness of Water Film on Atmospheric Corrosion Behavior of Carbon SteelLocalized Corrosion Behavior of High Nitrogen SteelA New Method to Determine the Activation Energy for Hydrogen Desorption from SteelsOrigin of the Hydrogen Absorbed by Incoherent TiC Particles in IronDevelopment of Corrosion and Wear Resistant Coatings by an Improved HVOF Spraying ProcessInfluence of Trace Boron and Cooling Rate on the Thermal Embrittlement of 2.25Cr-1Mo SteelFatigue Property of High-Strength Carbon Steel Deformed by Repetitive Side Extrusion ProcessStudy on Thermal Fatigue Behavior of Boride Layer of H13 SteelInteractive Mechanisms of Sulfide Inclusions and Environmental Factors in Low Cycle Fatigue Process of Pressure Vessel Steels in High Temperature WaterEvaluation of Thermal Degradation of 2.25Cr-1Mo Steel by High Frequency Ultrasonic Attenuation MeasurementDamping Capacity of the Fe-Cr-Al Based AlloysAn Investigation of a Nitrogen Enhanced Steel Processed by Explosive Powder CompactionDevelopment of the SAW Wire for High Strength TMCP SteelManufacturing and Oxidation Property of Steel and Ti Metal FibersDetermination of Optimum Parameters Effect on Kerf Width of 316L Stainless Steel Tube in Nd:YAG Laser CuttingThe Electromagnetic Confinement and Shaping Process of Liquid MetalModeling and Numerical Calculation of Heat Transfer during Magnetic Field QuenchingCorrelation of Yield Ratio with Materials Constants of Constitutive EquationExperimental and Thermodynamic Modeling of the MnO-SiO2-TiO2-Ti2O3 SystemInvestigations on the Photoprotection Ability of TiO2 Coated on CopperPhase Transformation in Fe-Based Alloys in High Magnetic FieldsVariant Selection in Fcc-to-Bcc Precipitation at Grain Boundaries in Ni-43Cr AlloyAnalysis of Porosity Characteristics in Weld Metal of High Strength Aluminum Alloy and the Effect of Mixed Shielding GasThe Behavior of AlTiC Master Alloys in Grain Refining of Commercial and High Pure AluminumThe Investigation on Aluminium Alloys Automobile Wheel with Low-Titanium Content Produced by ElectrolysisProduction and Mechanical Properties of In-Situ Ti Alloying A356 AlloysThermodynamics-Based Constituent Design of Lithium Containing 7000 Series Aluminum AlloysMechanical Characteristic of Flowing Solidification under the Extrusion for the Mixture of the Liquid Aluminum with Sillimanite ParticlesCompressive Properties and Energy Absorption of Hollow Sphere AluminumControl of Nano-Precipitates in Age-Hardenable Aluminum Alloys and Their Mechanical PropertiesHigh Speed Roll Casting of Aluminum Alloy StripInterfacial Reaction and Strength of Dissimilar Joints of Aluminum Alloys to Steels for AutomobileMicrostructures and Thermal Stability of the Metastable-Phase Precipitates Formed in an Al-Cu AlloyNano-Scale Clusters Formed in the Early Stage of Phase Decomposition of Al-Mg-Si AlloysStudy of Precipitation Sequence in Al-Mg-Si Alloys by HRTEMThe Metastable Phase Responsible for Peak Hardness and Its Morphology in an Al-Mg-Si AlloyDilute Alloy Designs of 7xxx Aluminum Alloys for Thick Forging ApplicationsDeformation Behaviors of 6061 and 7075 Aluminum Tubes at Elevated Temperatures for Warm HydroformingDevelopment of Horizontal Reheating System for Semi-Solid Die Casting and Its Microstructure EvaluationEffect of Be Addition on the Precipitation Behaviors and Mechanical Properties in Al-Cu-Li-Mg-Zr-(Ag) AlloysElectrochemical Etching of Aluminum Foil for Electrolytic CapacitorsEvolution of Annealing Textures and Microstructures in AA 3103 after Cold Rolling and Repeated Shear DeformationHigh Temperature Deformation Behavior of Pre-Sintered Al-10Si-5Fe Based AlloyMicrostructural Characterization of Rheology Material Fabricated by Rotational Barrel TypeSliding Wear Characteristics of Ultrafine-Grained Non-Strain-Hardening Aluminum-Magnesium AlloysThe Effect of Electromagnetic Vibration on the Continuous Elimination of Inclusions in Molten Aluminum Alloy by Electromagnetic ForceThe Effect of Electromagnetic Vibration on the Silicon Size at Hypoeutectic Al-Si AlloyThe Effect of Frequency of Electromagnetic Vibration on the Primary Silicon Size in Hypereutectic Al-Si AlloyThe Texture of 1050 Al Sheet Produced by Equal Channel Angular PressingEnhancement of Ductility in Aluminum Alloys by the Control of Transition-Metal Solutes during Thermo-Mechanical ProcessingLocalized Deformation of Equal Channel Angular Extruded AluminumA Low Environmental Load Modifying and Refining Treatment of Casting Al Alloys with REClosed-Cell Metal Foams Manufactured from Bulk Metal and Alloy Sheets through ARB ProcessEffect of Solution Heat Treatment on Microstructure and Mechanical Properties of Al Alloy FOAMEnhanced Mechanical Properties of A206 Aluminum Casting Alloy by Addition of Rare Earth ElementsThe Influence of Processing Parameters on Mechanical Properties and Microstructure of Welding Zone for Ti3Al-TC4 Dual AlloyWear and Corrosion Behaviour of In-Situ Al-TiB2 Metal Matrix CompositesMaterials and Processing Designs for High-Performance Magnesium AlloysDevelopment of Mg Alloy Sheets via Strip CastingEffect of Section Thicknesses on Tensile Behavior and Microstructure of High Pressure Die Cast Magnesium Alloy AM50Microstructure and Tensile Properties of Magnesium Alloy Containing Quasicrystallines Processed by Equal-Channel-Angular-ExtrusionPhase and Morphological Transformation of Preformed AZ91D Magnesium Alloys in RemeltingStudy on Microstructure and Properties of Mg-9Al-xZn AlloysMicrostructure, Texture and Deformation Behavior of Lithium Containing Magnesium AlloysThe Influence of the Stirrer's Shape and Process Parameter on Friction Stir Welded MB3 Magnesium JoiningEffects of Rolling Condition on Warm Deep Drawability of Magnesium Alloy Sheets Produced by Twin-Roll Strip CastingGrain Refinement in AZ91E Magnesium Alloy by Thermo-Mechanical TreatmentsIn-Situ Solid-State Synthesis of Mg Composite with Mg2Si DispersoidsMagnesium Foam Produced from Bulk AZ31 Magnesium Alloy SheetsSurface Modification on Magnesium Alloys by Coating with Magnesium FluoridesThe Forming Process of Magnesium Alloy for Japanese Home Electric ComponentsVacuum Distillation Refining and Extrusion Process of MagnesiumContinuous Casting of Magnesium Billets for Semi-Solid ProcessingDevelopment of Creep Resistant Mg AlloysDevelopment of Mg-Al-Zn Based Diecasting Alloys for Elevated Temperature ApplicationsEffect of Rolling Conditions on Microstructure and Mechanical Properties of AZ31 Mg AlloyEffects of Grain Refinement on Rollability of AZ31 Mg AlloyEffects of Precipitates and Alloying Element on Microstructure and High Temperature Properties of Mg-Al AlloysFluxless Recycling of Die-Cast AZ91 Magnesium Alloy ScrapMechanical Properties and Texture Evolution of AZ31 Mg Alloy during Equal Channel Angular PressingGrain Refinement and Texture Evolution in AZ31 Alloy during ECAP Process and Their Effects on Mechanical PropertiesThe Joint Characteristics of Friction Stir Welded Mg-Zn-Y AlloyRecrystallization in AZ31 Magnesium Alloy during Hot DeformationCurrent Research Situation and Development of Titanium Alloy in China in Recent Five YearsResearch on Semi-Solid Oxidation Behavior of Ti14 AlloySurface Roughness and Deformation of Grain during Tensile Plastic Deformation of Polycrystalline TitaniumDislocation Structure for Ambient Temperature Creep in Titanium MetalEffect of Heat Treatment on Microstructure and Mechanical Property of 45XD and 47XD TiAl AlloysEffects of Contact Pressure on Fretting Fatigue Characteristics of Ti-4.5Al-3V-2Mo-2Fe with Acicular Alpha StructureHigh and Low Cycle Fatigue of Orthorhombic Ti-22Al-27Nb AlloyEffects of Microstructure and Environment on Fatigue Properties of Investment Cast Ti-6Al-4V Alloy WeldsLow Cycle Fatigue Behavior of a Near-a Ti Alloy Containing Rare Earth NdThe Size Range of Volume Change of MeltingProgress of Directional Solidification in Processing of Advanced MaterialsAn Investigation of Structure Stability and Its Improvement on New Developed Ni-Cr-Co-Mo-Nb-Ti-Al SuperalloyEvolution of Internal Stress Field in Ni-Base Superalloy through Creep DeformationStrengthening Mechanisms in Some Single-Crystal SuperalloysThe Possibility of Cr-Base Alloys for High-Temperature ApplicationsEffect of Grain Size on Mechanical Properties of Single Phase Co-Ni-Cr-Mo Based SuperalloyTensile Properties of HIP/DB'ed Ni-Base SuperalloysPhase Transition during Slow Heating in the Mixture Insert Metal Using TLP Bonded InterlayerInfluence of Microstructural Changes and Grain Boundary Precipitation on the Behavior of 25Ni-15Cr-2Ti Superalloy during High Temperature CreepAssessment of Surface Damage in Thermally Aged FSX414 Cobalt-Based Superalloy Using Ultrasonic Rayleigh Wave New Phases in a Multicomponent High Ruthenium Single Crystal SuperalloyRoll Bonding and the Application in Making FeCrAl AlloyInterface Morphologies and Microstructure of a Single Crystal Superalloy under High Thermal Gradient Directional SolidificationEffect of Ta on the Oxidation Resistance of a Cast Nickel-Base Die Material with Low Cr and High W ContentPrecipitation Behavior during Ageing Treatment of a Single Crystal Nickel-Base SuperalloyRoom Temperature Deformation Behavior of Inconel718Mechanical Behaviour of a Single Crystal Superalloy DD32 - A Comparison with the Alloy SRR99Effect of Chromium on the Oxidation of a Fe-10 Al Alloy at 1000?CThe Control of Microstructures in (Mo1-x, Nbx) Si2 IntermetallicsElastic and Thermal Expansion Anisotropy of Mo-Based 5-3 SilicidesAn Assessment of Ir-Nb-X (X=Hf,Ta,Ti) Ternary Alloys for Ultra-High Temperature ApplicationsSolid Solution Hardening Effect of IrMicrostructure and Mechanical Property of MoSi2 Based CompositesPowder Injection Molding of NiobiumHigh Temperature Oxidation in Multicomponent Nb AlloysOxidation Behavior of Rh-xTi Refractory AlloysBonding Character in the Laves-Phases TiCr2 and TiCo2Growth of Single Crystals and Low Temperature Oxidation Behaviors of MoSi2 and NbSi2Microstructure and Properties of Directionally Solidified NbSi2/ Nb5Si3 CompositesMicrostructures and Properties of Refractory Niobium-Silicide-Based CompositesOxidation Resistant Silicide Coatings for Nbss/Nb5Si3 In-Situ CompositesUnidirectional Solidification of a Nbss/Nb5Si3 In-Situ CompositePreparation of Nanocrystalline NiAl Compounds and Composites by Mechanical AlloyingCatalytic Properties of Ni3Al for Hydrogen Production ReactionsMechanical Anisotropy of NiAl Alloys Processed by Hot Hydrostatic ExtrusionTensile Creep Behavior of NiAl-9Mo Eutectic AlloyEffect of Y Ion Implantation on Oxidation Behavior of IC6 Alloy at 1100?CMicrostructure and High-Temperature Creep Behavior of NiAl-25 at.% Cr Intermetallic CompoundOxidation of Four NiAl-Ag Alloys at 900?C in 1 Atm O2Advances in Ambient Temperature Creep Deformation Behavior of Two-Phase Titanium AlloysMicrostructure and Tensile Properties of Hot Worked High Nb Containing TiAl Alloy on Industrial ScaleSelection of Can and Insulating Materials for Controlled-Dwell Extrusion of Gamma-TiAlRecent Work on Alloy and Process Development of Ti2AlNb Based AlloysHigh Temperature Oxidation of Ti45.4Al4.8Nb and Ti46Al2Mo2Nb AlloysInvestigation on a Fabrication Technique of TiAl Sheet Skull Variation during the Induction Skull Melting Processing of ?-TiAl AlloyFinite Element Simulation of Canned Forging on TiAl Alloy Containing High NbEffects of Cooling Rate on the Microstructure and Room Temperature Tensile Properties of Orthorhombic Ti-22Al-21Nb-1Ta-1W AlloyElectron Beam Welding of Ti-24Al-17Nb-0.5Mo AlloyFlow Stress Behavior and Deformation Characteristics of Ti-22Al-25Nb Alloys at Elevated TemperatureThe Effect of Temperature on Microstructure and Mechanical Behavior of the Vacuum Brazed Joint of Ti-46.5Al-5Nb Alloy and 42CrMo SteelMicrostructure Control of Co3AlC-Base Heat Resistant Alloys Using Optical Floating Zone MeltingInvestigation on the Microstructure and High Temperature Mechanical Properties of Al3Ti-Mo3Al Two-Phase AlloysPhase Constitution and Transformation Behavior of Ni2MnGa-Cu2MnAl Pseudobinary Intermetallic CompoundsPrecipitation Behavior and Phase Stability of Intermetallic Phases in Fe-Cr-W-Co Ferritic AlloysSubstructure Development in Rapidly Solidified B2-Type TiCo RibbonsHigh Temperature Oxidation Behavior of TiNi AlloysPhase Transformation and Synthesis of Ni Substituted CoSb3 Skutterudite Synthesis during Solid State ReactionRCu1+xSb2 (R = La, Ce, Pr, Nd, Sm, Gd, Tb, Dy, Ho and Y) Phases with Defect CaBe2Ge2-Type StructureIron?Aluminium-Base Alloys with Strengthening Laves Phase for Structural Applications at High TemperaturesInvestigation on Microstructure Transformation and Failure Behavior of Cu-Cd-Nb-CP Electrical Contact MaterialEffect of Cu Content on Microstructure and Properties of Al2O3-SiO2 Fiber Reinforced Aluminum Matrix CompositesHot Compression Behaviour of In-Situ Synthesized (TiB+TiC)/Ti Composites Prepared by Hot-PressingMicrostructure and Properties of a 70vol.% SiCp/Al-12Si Composite for Electronic PackagingInfluence of Strain Rate and Temperature on the Compressive Deformation of a Eutectic Al-Si Alloy Based Composite Reinforced with -Si3N4 WhiskerMicrostructure and Mechanical Properties of B/Al Composite after Thermal-Mechanical CyclingHot Deformation Behavior of SiCw/AZ91 Magnesium Matrix Composite in CompressionMagnetoresistance of La2/3(CaxBa1-x)1/3MnO3/NiO Composite MaterialsSolidification of Aluminum Infiltrated CompositesLaser Cladding Ni-Base Composite Coating on Titanium Alloy with Pre-Placed B4C+NiCoCrAlYInfluence of Toughening Method on Microstructures and Mechanical Properties of Alumina-Matrix CompositesManufacture of Al/SiC Composites by Pressure Infiltration ProcessRolling and Annealing Textures of SiCw/Al CompositeFabrication of the Aluminum Matrix Composite by Ultrasonic Infiltration TechniqueIn Situ Synthesis and Properties of Aluminum Composites with Ultrafine TiB2 and Al2O3 ParticulatesFracture Behavior of Brittle Coating Layer on Metal SubstrateBending Damage Evolution and Its Influence on Critical Current and N-Value of Bi2223/Ag Superconducting Composite TapeA Monte Carlo Simulation on the PFZ Microstructures in Al-Based Alloys during Multistep AnnealingProposal of Pseudo Crack Model for the Un-Cracking Delamination Behavior of Fiber Reinforced Metal LaminatesProcessing and Microstructures of Tungsten/Copper Composites Produced by Plasma Spray and Cold SprayElevated Sliding Wear Characterization of Al/SiCp CompositesMechanical and Damping Properties of Squeeze Cast Hybrid Mg Matrix CompositesProcess Conditions and Interfacial Characteristics of Al/Cu Clad Composite Formed by Hot Hydrostatic ExtrusionSynthesis of In-Situ Titanium Carbide Particle Reinforced Titanium CompositesEffects of Core Material on Extrudability of Cu/Pure Al, Cu/Al3003 Clad Composites by Indirect ExtrusionOn Carbide Particle Reinforced Al Composites Fabricated by Pressureless Infiltration TechniqueOxidation Behavior of BN/(Al-Mg) Metal Matrix CompositesOn Thermomechanical Processing of High Ductility SiCp/Zn 22wt.%Al Metal Matrix CompositesNumerical Estimation of Thermal Conductivity in Copper and Superalloy Matrix CompositesEffects of Carbon Nanotubes Incorporation on the Grain Growth and Properties of WC/Co NanocompositesStabilization of Nano-Al2O3p/Cu Composite after High Temperature Annealing TreatmentInfluence on Optical Properties of the New-Type Rear Projection Screen by the Content of Additive TiO2 Nano-ParticleStudies on Nanostructured Polyurethane/Clay Interpenetrating Polymer NetworksEncapsulation of Nanometer CaCO3 by Polymer NetworkAdvanced CVI-SiC/SiC Composite with In-Situ Growth of SiC Nanowires in the Matrix as Additional ReinforcementsCoating of SWNTs with Nickel by Electroless Plating MethodStudy on Dynamic Mechanic Properties of Thermosetting/Thermoplastic System Used as the Matrix of Advanced CompositeStudy on a Novel Radar Absorbing Structure CompositeSynthesis of a Novel SAP with PS FoamStudies on Tetrapod-Shaped ZnO Whisker Modified Polymer CompositesPhoto-Oxidation of Polyethylene Composites with Different Interfacial InteractionsStudy on the Cure Kinetics of Middle Temperature Curing 3234 Epoxy Resin SystemExperimental Study on Dynamic Properties of High Strength Fiber ClustersStudy on the Assorted Non-Asbestos Fiber Reinforce Composite by Beater-Addition ProcessOptimizing Analysis in the Bending Rigidity of CFRP Circular Plate with Multiple HolesProcessing and Properties of Polymer Composites Reinforced by Functionalized SWNTsEvaluation of Eddy Current Inspection on the Defects of Unloading vs. Loading Conditions in the Fiber Reinforced Composite MaterialsStatic Analysis of Thick Laminated Beams: Two-Dimensional Elasticity Solutions via Differential QuadratureCryogenic Mechanical and Electrical Properties of Polyimide NanocompositesDetermination of Friction and Wear of Engineering Polymers by Means of Large-Scale Specimen TestingOn-Line Wear Monitoring of Polymer Matrix CompositesResearch on Electromechanical Properties of Cymbal Piezocomposite TransducerTensile and Bending Behavior of Melt Growth Al2O3/YAG Composite at Ultra High Temperatures (1773-2023K)Application of Grazing-Incidence Small-Angle X-Ray Scattering Technique to Semiconducting Composite MaterialsFracture Behavior and Its Shear Lag ? Monte Carlo Simulation of SiC/SiC Composite Exposed in Air at High TemperaturesResearch on Tribology of C/C Composites in Wet ConditionsDesigning a Composite Material for Use in Brake ApplicationsA Study on the Fracture Mechanism of Smart Composite under Thermal Shock Cycles Using AE TechniqueA Search for New Red and Green Phosphors Using a Computational Evolutionary Optimization ProcessDynamic Visualization of Crack Tip Stress Field and Propagation Using the Mechano-Luminescence in SrAl2O4: (Eu,Dy,Nd)Effects of S-Doping and Subsequent Annealing on Photoluminescence around 1.54um from Er-Containing ZnOA Study on Nanometer-Sized BaTiO3-Based Dielectric for Ni-MLCC with Y5V SpecificationAnisotropic Properties of Grain Orientated Bismuth Titanate Ceramics by Spark Plasma SinteringEffect of Excess PbO on the Kinetics of the Growth of PMNT Polycrystals by Templated Grain Growth MethodEffect of TiO2 on the Property of RuO2/?-Al2O3 CatalystMicrostructure and Mechanical Properties of PMS-PZT Ceramics with Silica AdditivesFabrication of NiO-SDC Composite Anodes Using Gel-Casting for Low-Temperature SOFCsMolten Salts Synthesis and Dielectric Properties of PMN-PT CeramicsIntermediate-Temperature Solid Oxide Fuel Cells with Y0.25Bi0.75O1.5-Ag CathodesPreparation and Characterization of Tin Doped Tetra-Pod Shaped Zinc OxideSPS Sintering of NaNbO3-KNbO3 Piezoelectric CeramicsStabilization Effect in BaTiO3 Single Crystal during Aging below TcStudy of the Weak Ferromagnetism in Ca1-xLaxB6 CeramicsPreparation and Characterization of Antibacterial Titanate WhiskersSynthesis and Photoluminescence of Eu3+ Doped Sr2CeO4 via Carbonate PrecursorThe Interface and Grain Growth in Cofired Ferroelectric / Ferrite Multilayer CompositesThe Structure and Optical Properties of Dy3+ Doped PLZT CeramicsComposition Dependent Fatigue in Antiferroelectric PZST Ceramics Induced by Bipolar Electric CyclingPreparation, Phase Transformation and Dielectric Properties of Aluminum Phosphate CompoundsComparative Study on Microstructure of Pb(Mg1/3Nb2/3)O3-PbTiO3 CeramicsExtraction Efficiency in Pulsed Laser Deposited Y2O3:Eu3+ Thin Film Phosphors on Corrugated SubstratesElectrical Conductivity of SrRuO3 Thin Films Prepared by Laser AblationLaser CVD Process for High Speed Deposition of YSZ FilmsPreparation of Rutile and Anatase TiO2 Films by MOCVDA Study on the Preparation of TiO2-xNx Films by Reactive Deposition and Their Absorption Properties in Visible RegionStudy on the Cracking of SiO2-TiO2 Films Prepared by Sol-Gel MethodInfluence of Deposition Processing Conditions on Polycrystalline Silicon Thin Film for Solar Cells on Ceramic SubstratesSynthesis of Titanium Dioxide Nanotubes by Ion Exchange ApproachSynthesis and Growth Mechanism of Silicon Nitride NanostructuresSynthesis and Properties of Ti3SiC2/SiC Ceramic CompositesFabrication of Ti3AlC2 Powder with High-Purity by Pressureless SinteringTi3AlC2 ? A Soft Ceramic Exhibiting Low Friction CoefficientJoining of SiC Ceramic with Ternary Carbide Ti3SiC2Self-Lubricant Effect of Tri-Oxidizing Layer in Surface of Bulk Ti3SiC2 MaterialsEffect of Different Abrasive Particle Hardness on the Erosion Resistant Performance of a-Al2O3 CeramicsJoining of Cf/SiC Ceramic Matrix Composite Using SiC-Si3N4 Preceramic PolymerStudy on Phase Transformation and Microstructure Development of Yb a-SiAlON Ceramics Prepared by Pressureless SinteringLaminated Fabrication Ceramics by Aqueous Tape Casting TechnologyStudy on Thermal Conductivity of SPS-Sintered Si3N4 Ceramics after Heat-TreatmentStudy on the Oxidation Behavior of Ca-a-SiAlON in an Air StreamThree-Dimensional Simulation of Sintering of CeramicsStudy on Densification Behavior and Microwave Attenuation Characteristics in AlN/SiC CompositesHigh-Temperature Strength of Directionally Solidified Al2O3/YAG/ZrO2 Eutectic CompositeProcessing and Microstructure of an All-Oxide Ceramic CompositeFast Uniform Mixing & Controllable Colloidal Forming of CeramicsGelcasting of Alumina Ceramic in Presence of Water-Soluble PolymerOrigin, Transformation and Control of the Inner Stress in the Green Bodies Prepared by Ceramic Colloidal Forming ProcessingStudy on Elimination of Surface-Exfoliation and Crack of ZrO2 Green Body of Gelcasting with Water-Solubility MacromoleculePretreatment Processing of Gelcast Green Body before DebindingControllable Forming Technology in GelcastingBiaxial Fracture Behavior of Polycrystalline AluminaTensile Properties and Creep Behavior of SiC-Based Fibers under Various Oxygen Partial PressuresMicrostructure and Electrode Discharge Machining of TiN/Si3N4 CompositesStudies of Damage Accumulation in 4H Silicon Carbide by Ion-Channeling TechniquesDefects and Ion-Solid Interactions in Silicon CarbideCrystal Structure and Phase Relationships in the Reduced-Reoxidized Ceria-Zirconia Solid SolutionMaterial Processing and Testing of Plasma-Interactive Components for Fusion Energy SystemsDevelopment and High Heat Flux Testing of Plasma Facing Materials for Future Fusion ExperimentsBehavior of Thick SiC Gradient Coatings on Graphite under High Heat Flux and HT-7 Limiter Plasma IrradiationResearch on W/Cu Functionally Graded Materials as Divertor Material in ChinaDevelopment of Tungsten Coatings for Application in Fusion ExperimentsThe Structure and Properties of Low Activation Ferritic / Martensitic SteelsEffects of Pb on SCC of Alloy 600 and Alloy 690 in Prototypical Steam Generator ChemistriesElectron Irradiation Damage in Stabilized Cubic ZirconiaResearch on Fatigue Properties on Two Kinds of New Developed Zirconium AlloysEffects of Heat Treatment on Corrosion of Zr-1.0Nb-1.0Sn-0.1FeCreep Resistance of Zr-Sn-Nb-Fe-Cr AlloyDelayed Hydride Cracking Velocity of Irradiated Zr-2.5Nb Tubes after a 30-Year Operation in the Wolsong Unit 1An Analysis of Deformation and Fracture Behaviour of Zircaloy-4 Alloy Using Small Punch Test Microstructural Evolution and Micro-Texture in Zr-2.5Nb TubesEffect of He-Injection on Irradiation Damage of High Mn-Cr SteelImprovement of Thermomechanical Fatigue Life in Nitrogen Alloyed 316 Stainless SteelApplication of Creep Ductility Model for Evaluation Creep Crack Growth Rate of Type 316SS SeriesFeatures of Swelling in Modified Austenitic SteelsEffect of Impurities on Vacancy Mobility in V-4Cr-4TiBehavior of Oxygen in Fusion Candidate Vanadium Alloys during Oxidation and AnnealingImprovement of Vanadium Alloys by Precipitate Control for Structural Components of Fusion ReactorsEffect of Helium and Aging Treatment on Radiation Damage Behavior in Low Activation Fe-Cr-Mn (W, V) AlloyA TEM Study of Cavity Structures in a Fe-Cr-Mn Alloy and a 316L Stainless Steel Heavily Irradiated with 92 MeV Ar IonsDamage Behavior of Electron/Helium Dual-Beam Irradiation on Fe-Cr-Mn (W, V) AlloyNano-Meso Structures and Ring-Tensile Properties of Neutron-Irradiated ODS SteelsChanges in the Microhardness and Young's Modulus in 2 MeV C+ Ion-Irradiated IG-110 Nuclear GraphiteFabrication and Evaluation of B4C/Cu FGM as Plasma Facing MaterialsThe Microstructure of Pure Copper after Stepwise Change of Irradiation TemperatureEffect of Cr Content on Supercritical Water Corrosion of High Cr AlloysStructure Changes in Stainless Steels Used in Nuclear Reactors and Turbo Generators after Minor Low Cycle Fatigue DeformationThe Microstructure of Laser Welded V-4Cr-4Ti Alloy after Ion IrradiationDevelopment of an Innovative Carbon-Based Ceramic Material Application in High Temperature, Neutron and Hydrogen EnvironmentCharacterization of Al3Fe Particle within Al-Al3Fe Functionally Graded Material Fabricated by Semi-Solid FormingFunctionally Graded Tungsten Carbide Cobalt Coatings Fabricated by Detonation GunFabrication of W/Cu Functionally Gradient Materials by Multi-Billet ExtrusionEffects of the Rotating Speed of Centrifugal Machine on the Gradient Structure and Properties of Heavy Cross-Sectional WCP/Fe-C CompositesIn-Situ Fabrication and Fracture Characteristics of Structural Gradient Ni/Ni-Aluminide//Ti/Ti-Aluminide Layered MaterialsA New Technique for Fabrication of Flat PP/Talc Graded MaterialCalculation of Thermal Stresses in Mo-Ti FGM with a Continuous Change of CompositionApplication of the Equivalent Transformation Layering Calculation Model in Heavy Cross-Section FGCs - Axis-Symmetrical Mechanics ProblemsCharacteristic Wave Impedance of Ti-Mo System Composites and FGMDetermination of the Impact Fatigue Behavior of the Mo Surface Modified Ti6Al4V AlloyThe Damage Mechanisms under Different Fretting Modes of Bonded Molybdenum Disulfide CoatingNumerical Simulation on Thermal Shock Resistance of TiB2-Cu Interpenetrating Phase CompositesTiB2/Cu Electrode Material Fabricated via SPSGraded Structure in SHS Ceramic-Lined Layered PipesThe Properties of W Coatings on Cu by Supersonic Plasma SprayPorosity-Graded Piezoelectric Ceramics: Processing and Electric-Induced DisplacementPlasma Sputtering and Optical Properties of Au/SiO2 Nano-Composite FilmsGradient Microstructure Analysis of PI-SiO2 Hybrid Tubular FilmsTEM and TEM-EDX Analysis of Cross-Section of Anti-Reflective Thin Film and Glass SubstratePreparation and Characterization of Pb(Zr,Ti)O3 Films on SrTiO3 SubstratesElectrical and Physical Properties of Al and Nb Doped PbTiO3 Ceramic Thin FilmsThermoelectric Properties on n-Type BixSb1-x /Bi2Te3 Graded Materials Containing Fullerite or Carbon TubeChemical Solution Deposition Process and Characterization of Li and Ti Doped NiO Thin FilmsNew Progress on SHS of Silicon Nitride with High a-Phase ContentCombustion Synthesis of Carbide Particle Dispersed Aluminide IntermetallicsTernary Ceramics Ti3SiC2: Combustion Synthesis and the Reaction MechanismSynthesis of Porous TiAl-Mn Intermetallic Compounds by Reactive Sintering ProcessEffect of Copper Content on the Microstructures and Properties of TiB2 Based Cermets by SHSEffect of La2O3 on the Properties of Combustion-Synthesized Molybdenum DisilicideImmobilization of Radioactive Wastes into Perovskite Synrock by the SHS MethodThe Effects of Nitrogen Purity and Pressure on Combustion Synthesis of a-Si3N4 PowdersCombustion Synthesis of Al2O3-30vol%ZrO2 Nano-Submicron Structured Multiphase Ceramics Synthesis Ba3(Ca1.18Nb1.82)O9-d with Sol-Gel Auto-Ignition Process and Its Electrical Conducting PropertyComparison of Characteristics of BaTiO3 Prepared by Different ProcessXPS Studies on Composite TiO2-SiO2 Thin Films Deposited on Metal Substrate by Sol-GelTernary Ceramics Ti3SiC2: Combustion Synthesis and the Reaction MechanismThermal and Solute Transportation Effects during Bridgman Crystal Growth of II-VI CompoundsLow Threshold Current Density 1.5 ?m Strained-MQW Laser by n-Type Modulation-DopingInfrared Studies of GaN1-xPx Ternary AlloysTEM Studies of Grain Boundary Structure in a Cast Polycrystalline SiliconEffect of Zn and Fe Concentrations on Structure and Optical Damage Resistances of Near Stoichiometric Zn:Fe:LiNbO3 CrystalsGrowth of an Inx(OOH,S)y Buffer Layer and Its Application to Cu(In,Ga)(Se,S)2 Solar CellsComparison the Gain Characteristic of AlInGaAs/AlGaAs and GaAs/AlGaAs Quantum WellsStructure Characterizations and Growth of Bulk ZnSe Single Crystals by Zn(NH4)3Cl5 TransportSurface Morphology Evolution during LP-MOCVD Growth of ZnO on SapphireStrain Property Studies of GaN:Mg Films Grown by MOCVDCoprecipitation Synthesis and Photoluminescence of BaMgAl10O17:Eu2+ Phosphor for PDP ApplicationDevelopment of Electrode Materials for Semiconductor DevicesMagnetic Properties and Magnetostriction of ZnxNi1-x MnSb AlloysTheoretical Analysis of Electron Statistics for n-Type DiamondSilica and Alumina Thin Films Grown by Liquid Phase DepositionGrowth of Hg1-x(Cd1-yZny)xTe on Si(111) by Isothermal Vapor Phase EpitaxyCharacteristic of Nanoporous SiO2 Thin Film Prepared by Sol-Gel Method with Catalyst HFStudy on Thermal Shock Resistance of Insulated Metal SubstrateEffects of Deformation on Electric Conductivity in Al-Zr AlloysFabrication and Properties of Lead-Free Sn-Ag-Cu-Ga Solder AlloyStrain Change and Creep Behavior of STACIR/AW Power Line with Heat ExposureThermophysical Properties of Aluminum Infiltrated Silicon Carbide for Electronic PackagingAu as an Acceptor in Thermoelectric Bismuth Antimony Telluride Alloys Prepared by Mechanical Alloying ProcessPreparation and Sintering Behavior of Au Conductor Pastes for LTCC SubstrateNew Material of Ni-Ti Alloy for Chip Tantalum Capacitor FuseA Study of the Degradation Mechanism for Carbon Nanotubes in Field Emitter ApplicationsInterface-Related In-Plane Optical Anisotropy of Quantum Wells Studied by Reflectance-Difference SpectroscopyControlled Growth of III-V Compound Semiconductor Nano-Structures and Their Application in Quantum-DevicesAnti-Weak Localization of the Two Dimensional Electron Gas in Modulation-Doped AlxGa1-xN/GaN Single Quantum WellThe Structural and Photoluminescence Character of InAs Quantum Dots Grown on a Combined InAlAs and GaAs Strained Buffer LayerStructural and Optical Investigation of Mn-Doped ZnS NanocrystalsHigh-Efficient Non-Doped Type White Organic Light-Emitting Devices Using an Electron/Exciton BlockerBlue and White Organic Light-Emitting Devices Using 2,5-Diphenyl -1, 4-Distyrylbenzene with Two Trans-Double Bonds as a Blue Emitting LayerSynthesis and Electrochemical Properties of Nonstoichiometric Spinel Phase (Li1.02Mn1.90Y0.02O4-yF0.08) for Lithium Ion BatteryImproving the Performance of Organic Light-Emitting Devices by Adding the Starburst Amine as Buffer LayerRaman and Photoluminescence Spectral Study of Eu(DBM)3?2H2O at High PressuresSynthesis and Characterization of a New Organic Photochromic Function MaterialStructural Properties of Sputter-Deposited ZnO Thin Films Depending on the Substrate MaterialsControl of Morphology of YBO3:Eu by a Mild Hydrothermal ProcessSimulation of the MOCVD Reactor for ZnO GrowthUV-Irradiation-Induced Refractive Index Increase of Ge-Doped Silica FilmsInvestigation of the Optical Properties of CdZnTe by IR Transmission and PL SpectraEffect of Pattern Shape on the Crystallization in FALC ProcessFabrication of Glass Mixing Channels and Silicon Detection Cell with 45? Mirror Surfaces for the Indophenol Sensing DeviceFabrication of Pressure Sensors with Diaphragm by Electro-Chemical Etch-StopOrientation Distributions of Ferroelectric BLT Films for High-Density Semiconductor Memories Influence of AC-Voltage on the Crystallization of Amorphous Silicon Thin Film during Field Aided Lateral Crystallization ProcessThe Texture and Property of Diffusion Barrier of TiN Thin FilmsApplication of TLP (Transient Liquid Phase) Bonding Method to the High Tm Lead-Free SolderChanges of Fatigue Property with Heat Exposure in INVAR/AW WireProperties of Electroless Nickel Composite Plating FilmIntermetallic Formation between Sn-Ag(-Cu) Solder Bumps and Au/Ni/Ti UBM and It?s Effects on the Shear Force of the Solder BumpsSimulation and Fabrication of Silicon Micro-Grippers Actuated by Piezoelectric ActuatorCarbon Nanotube Field Emitters for Display Applications Using Screen PrintingEffect of Pressure on Melting Temperature of Silicon and GermaniumPolarized Photoluminescence and Temperature-Dependent Photoluminescence Study of InAs Quantum Wires on InP (001)A New AC-Driving Method for Active-Matrix OLED DisplaysMolecular Organic White Light-Emitting Devices Fabricated by a Simple Way through Nondoped ProcessPerspective in Application of the Phase Field Theory to Smart Materials PerformanceSuperelasticity in TiNi Alloys and Its Applications in Smart SystemsElectronic Structure Analysis for the Effect of Hf, Zr Addition on the Ms of TiNi AlloysEffect of Ni-Content on Shape Memory Behavior of Ti-Rich Ti-Ni Melt-Spun RibbonsEffects of Bias Springs on Actuation and Transformation Behaviors of TiNi WiresThe Dynamic Impact Behaviors of NiTi AlloySelf-Tension of Martensite during Constrained TransformationSynthesis of TiNi Particles in High Temperature Molten SaltsEffect of Nb-Content on Mechanical Properties of (Ni47Ti44)100-xNbx Shape Memory AlloysEffects of Pre-Strain and Nb Content on Transformation Temperatures in Ti-Ni-Nb Shape Memory AlloyInfluence of Cold Working on Deformation Behavior and Shape Memory Effect of Ti-Ni-NbShape Memory Alloy Pipe-Joint with Copper CoatingInfluence of Cyclic Deformation on Shape Memory Characteristics of Ti-Ni-Cu Alloys Fabricated by Pulse-Current Pressure Sintering MethodThe Effect of Rapidly Solidified Microstructures on the Martensitic Transformation in Ti50-Ni45-Cu5 Shape Memory AlloysThe Dynamic Impact Behavior of Ti50Ni47Fe3 Shape Memory AlloysEffect of Ce Addition on Martensitic Transformation Behavior of TiNi Shape Memory AlloysAnomalies in Physical Properties Related to the Stability of the B2-Phase in Ti-Ni-Co Shape Memory AlloysAnisotropy in Elastic Properties of Textured TiNbAl Shape Memory AlloyMechanical Properties of (Pt, Ir)TiMartensitic Transformations of Ni54Mn25Ga21-xAlx Shape Memory AlloysInfluence of Rare Earth on Shape Memory and Martensitic Transformation Behaviors of a FeMnSiCr AlloyMagnetic Field-Induced Strain of Martensite and Parent Phases in a Ferromagnetic Shape Memory Iron-Palladium AlloyMagnetic Field-Enhanced Shape Memory Effect in Ni51.6Mn23.4Ga25 Single CrystalsMartensitic Transformation and Magnetic-Field-Induced Strain in Magnetic Shape Memory Alloy NiMnGa Melt-Spun RibbonStress Induced and Magnetic Field Enhanced Twin Variants Reorientation in NiMnGa Single CrystalMartensitic Transformation of Ni2.18Mn0.82Ga Single Crystal Observed by Synchrotron Radiation White X-Ray DiffractionTemperature Dependence of Rearrangement of Martensite Variants in a Ferromagnetic Shape Memory Alloy Ni2MnGaThe Stability of Magnetic-Field-Induced Strain in a NiMnGa Ferromagnetic Shape Memory AlloyShape Memory Effect in Co-Ni Polycrystalline AlloysCharacterization of Martensitic Transformation in Ferromagnetic Shape Memory Alloys Co-Ni-Ga Melt-Spun RibbonsCharacterization of High-Speed Microactuator Utilizing Shape Memory Alloy Thin FilmsA Study on the Application of Ni-Ti Shape Memory Alloy as a SensorEffects of Additional Reinforcing Fibers on the Interface Quality of SMA Wire/Epoxy CompositesOn the Internal Friction of Ti50Ni25Cu25 Particle/Al Smart CompositeAxial Compressive Behavior of Single-Stage Bellows of TiNi Shape Memory Alloy for Seismic ApplicationsProcessing of Single-Stage Bellows of TiNi Shape Memory Alloy Using Rubber Bulge MethodDevelopment of Fe-Mn-Si-Cr Shape Memory Alloy Fiber Reinforced Plaster-Based Smart CompositesShape Memory Behavior of NiMnGa/Epoxy Smart CompositesCrack-Healing Behavior of Mullite/SiC Particle/SiC Whisker Multi-Composite and Mechanical Properties of the Multi-CompositeDegradation of Corrosion Resistance of Implant Metals Promoted by Living Adhesive CellsMetal-Containing Diamond-Like Nanocomposite Thin Film for Advanced Temperature SensorsNew Piezoelectric Composites-Design, Fabrication and CharacterizationGiant Magnetostrictive Actuator and Its Application in Active Vibration ControlA Novel Smart Spring Concept for Helicopter Blade Vibration and Noise SuppressionThe Novel Method of Structural Health Monitoring Using FEM and Neural NetworksMagnetostrictive Material Actuator Based Active Vibration Control-a Heuristic Iterative Learning Control MethodA New Method to Identify the Preisach Distribution Function of HysteresisOn Control of Six Freedom Magnetostrictive Smart StructureResearch on the Model of the Magnetostrictive ActuatorDamage Localization on Two-Dimensional Structure Based on Wavelet Transform and Active Lamb Wave-Based MethodDefects Distribution of Pr2Fe14B Hard Magnetic Magnet from Amorphous to Nanostructures Characterized by Positron Annihilation SpectroscopyMagnetic Structure and Magnetization Reversal in Nanocomposite Pr2Fe14B/a-Fe RibbonsMagnetic Properties of Fe-Pt Nanoparticle Protected by PVP PolymerMagnetic Stability of Fe-Cr-Co Permanent Magnet Materials at High TemperatureM?ssbauer Spectrometry Study of Spinodal Decomposition in Fe-25Cr-12Co-1Si Alloy during Step AgeingStudy on Manufacture of 2:17 Sm-Co Magnets by Powder Injection MoldingEffect of Mini Ga Doping in Nanocrystalline Nd4.5(Fe,Co)77.5B18 Magnet on CoercivityElectrochemical Impedance Spectroscopy of Nd-Fe-B Magnet Prepared by Spark Plasma SinteringNew YDy-Based R2(Fe,Co)14B Melt-Spun Magnets (R=Y+Dy+Nd)Spark Plasma Sintering Nd2Fe14B/a-Fe Bulk Exchange-Spring MagnetsStudy on Two-Phase Nanocrystalline Nd2Fe14B/a-Fe Bonded MagnetInfluence of Cooling Rate on Microstructure of NdFeB Strip Casting FlakesExchange-Coupling Interaction and Effective Anisotropy in Two-Phase Nanocomposite Permanent Magnetic MaterialsThe Effect of Antiferromagnetic Element Manganese on the Magnetic Properties of a-Fe/Nd2Fe14B MagnetsInvestigation of Hard Magnetic Behaviors for Nd-Fe-B Based Magnets Prepared by Hydrogen Decrepitation TechniqueNd2Fe14B/a-Fe Nanocomposites Prepared by Mechanically Activated Disproportionation and Subsequent Desorption-RecombinationMagneto-Transport Study on Ni1-xMnx(0.23 Axial AlignmentThe First-Principles Study of Electronic Structure of Fe/MgO/Fe Magnetic Tunnel Junctions InterfaceMagnetotransport Behaviors in Electron-Doped Manganese Oxide La0.9Te0.1MnO3Dynamics of Magnetization Reversal in Thin Polycrystalline Co FilmsThe Magnetic Entropy Changes in Gd1-xCrx AlloysA Study on the Preparation of PEG/FeOx FerrofluidsChemical Synthesis of Magnetic Fe3O4 NanoparticlesThe Precipitation of Copper in the Non-Oriental Electrical SteelStudy on Magnetoresistance for Trilayer with Fe3O4 FilmEffects of HA/TiN Coated Film on the Surface Activation of Bone Plate AlloysMicrostructures and Elastic Moduli of Binary Titanium Alloys Containing Biocompatible Alloying ElementsRole of Alloying Elements on the Cytotoxic Behavior and Corrosion of Austenitic Stainless SteelsHigh Temperature Deformation Behavior of a Beta Titanium Alloy for Biomedical ApplicationDental Precision Casting of Ti-29Nb-13Ta-4.6Zr Using Calcia MoldDevelopment of Ti-30 mass% Ta Alloy for Biomedical ApplicationsEffect of Nitrogen on Mechanical Properties of Porous Titanium Compacts Prepared by Powder SinteringMechanical Properties of Forged Low Ni and C-Containing Co-Cr-Mo Biomedical Implant AlloyPseudoelastic Properties of Cold-Rolled TiNbAl AlloyMechanical Properties of Ti-Nb Biomedical Shape Memory Alloys Containing 13- and 14-Group ElementsWear Loss and Elution of C.P.Ti and Titanium Alloys in Simulated Body FluidsEffect of Zr Addition on Phase Constitution and Heat Treatment Behavior of Ti-25mass%Nb AlloysAmbiguous Transition from Fretting to Sliding of Biomedical AlloysBiomedical Properties of Tantalum Coatings Prepared by Multi Arc Ion-PlatingInvestigation on Near-? Titanium Alloy Ti-5Zr-3Sn-5Mo-15Nb for Surgical Implant MaterialsAn Improvement in Sintering Property of ?-Tricalcium Phosphate by Addition of Calcium Pyrophosphate and Calcium CarbonateGene Expressions Induced by Calcium Phosphate Ceramics after Implantation into the Muscle of RatImproving the Interconnectivity of Chitin-Gel-Cast Porous Calcium Phosphate Ceramics by Different Acid Etching ApproachesStudy on Plasma Sprayed Calcium Silicate CoatingsThe Influence of Calcium at the Titanium Surface on Co-Precipitation of Ca-P and Bovine Serum AlbuminCompare of Electrospinning PLA and PLA/?-TCP Scaffold in VitroA Novel Way to Prepare Nano-Hydroxyapatite/Poly(D,L-Lactide) CompositeDynamic Rheological Behaviors of the Bone Scaffold Reinforced by Chitin FibresMaterials Selection and Scaffold Construction for Liver Tissue EngineeringStudy on Adhesion and Biocompatibility of Copolymer of MMA-BMA-MAA for Coronary Stents CoatingsStudy on the Shape Memory Behavior of Poly (L-Lactide)Particle Size Reduction of Biomaterials Using Cryogenic Milling ProcessInfluence of Bone Structure on Mechanical Properties of Bovine and Swine Compact BonesLong Magnetic Nanochains Assembled by Magnetotactic Bacteria in a Directional FieldResponse of Human Osteoblast-Like Cells and Fibroblasts to Titanium Alloy Nitrided under Glow Discharge ConditionsThe Study of Apoptosis and Phagocytosis of Rabbit Synoviocytes Induced by Particulate Joint Replacement MaterialsStudy of Nano-Hydroxyapatite on the Remineralization of Dismineralized TeethStudy on the Subsonic Thermal Sprayed Ti/Bioglass Composite Coatings on Titanium AlloyRecent Advances in Lithium-Based Complex Hydrides for Solid-State Hydrogen StorageMetal-Complex Hydrides for Hydrogen-Storage ApplicationA New Concept: Hydrogen Storage in MineralsSynthesis and Properties of Nanostructured Mg2Ni-Based CompoundsSynthesis of Composite Metal Hydride Alloy of A2B and AB2 Type by Mechanical Alloying and Spark Plasma SinteringHydrogenation Properties of Mg-Co and Its Related AlloysEffects of Al on Cycling Stability of a New Rare-Earth Mg-Based Hydrogen Storage AlloyA Study on Hydrogen Desorption Properties of Multiwall Carbon NanotubesHydrogen-Induced Amorphization in C15 Laves Phase DyCo2 Studied by Pressure CalorimetryThe Electrochemical Characteristics of Mg-Based Alloy Prepared by HT (Heat Treatment) and MG (Mechanical Grinding) for Nickel-Metal Hydride Secondary BatteriesMicrostructure and Mechanical Properties of Ca Containing AZ91 Magnesium AlloysDegrading Mechanism on Hydrogen Absorbing-Desorbing Cycle Durability of V- and Ti-Cr-Based BCC-Type Solid SolutionsRelationship between Palladium Morphology and Thermodynamics in Palladium-Hydrogen SystemHydrogen Storage Intermetallic Compounds: First Principles Investigations of Properties Relevant to ApplicationsAlloying Effects on Hydrogen Permeability of NiobiumInvestigation of Cobalt-Free AB5-Type Hydrogen Storage AlloyHigh-Temperature Characteristics of Melt-Spun Hydrogen Storage AlloysProperty Changes of Some Hydrogen Storage Alloys upon Hydrogen Absorption-Desorption CyclingHydrogen Diffusion in Ti-Cr Hydrogen Absorption Alloys by Tritium RadioluminographyEffects of Rare-Earth Content on the Properties of Co-Free MmxMl1-x(NiCuAlZn5)Hydrogen Storage AlloysSynthesis and Crystal Structure of New Hydrides in Mg-RE Systems under High-Pressure (RE = La, Ce, Pr)Centrifugal Casting Practice and Microstructure and Mechanical Properties of a 2205 Duplex Stainless SteelDetermination of Die Design Rules for Semi-Solid Die Casting Process and Its Experimental InvestigationEffect of Alloying Elements on the Strength and Casting Characteristics of High Strength Al-Zn-Mg-Cu AlloysInvestigation of Protective Cover Gas Mixtures for Prevention of Melt Ignition during Magnesium Alloy MeltingInvestment Casting of Near-Net Shape Gamma Titanium Aluminide Automotive Turbocharger RotorInvestment Casting of Titanium Matrix CompositesEffects of Pouring Temperature on the Solidification Structure of INCONEL718 Investment CastingFiber Orientation Control and Evaluation of Characteristics of Short Fiber Reinforced Metal Matrix Composite Fabricated by Low-Pressure Infiltration ProcessFormation of Faceted 123 Crystals in Superconductive REBCO Oxide Fabricated by Infiltration-Growth MethodSolidification Behavior of Iron-Niobium and Iron-Carbon-Niobium AlloysA Model for Grain Growth in Semi-Solid Treatment of an Al-4Cu-Mg AlloyContinuous Casting and Directional Solidification of Titanium Alloys with Cold CrucibleDeformation Behavior of Semi-Solid Steels Fabricated by Electromagnetic StirringEffects of Trace Ti on the Microstructure and Properties of Casting Mg-9Al Magnesium Alloy Morphology of Primary Silicon and its Growth Mechanism in Hypereutectic Al-Si Alloys during Melt Overheating TreatmentEffect of Filler Wire Composition on the Nd:YAG Laser Weldability of 6061 Aluminum AlloyRefining of Metallurgical-Grade Silicon by Thermal Plasma Arc MeltingDamping Behavior of the High Strength Aluminum Alloy Prepared by Rapid Solidification and Powder Metallurgy ProcessCrystallization of Spherical Single Crystal of Silicon from Undercooled Droplet under Containerless ProcessingDirectional Solidification of Undercooled Hypoeutectic Silver-Copper Alloy MeltMicrostructure Evolution of a Zn-4wt.% Cu Hyperperitectic Alloy under Laser Surface RemeltingResearch on Molten Pool Shape during Laser Rapid Forming through the Close-Range Continuous PhotographyUnidirectionally Solidified Al-Cu Eutectic Alloy under High Intensity Pulsed Magnetic FieldThe Microstructure and Mechanical Properties of Directionally Solidified NiAl-15Cr Alloy at Various TemperaturesEnhanced Growth Kinetics of Intermetallic Compounds between Bi-Containing Sn-3.5Ag Solders and Cu Substrate during AgingOptimal Operational Conditions during Production of Lead-Calcium-Tin Anodes for Improve Their Mechanical PropertiesEffect of Electrical Pulse Ageing on Microstructure and Properties of Cu-2.5Fe-0.03P-0.1Zn Copper AlloyInfluence of Sintering Temperature on Mechanical Properties of Ti-6Al-4V Compacts by Metal Injection MoldingInterface Morphology and Solute Partition during Directional Solidification Process of Al-1.5Cu-3Zn AlloyInvestigation on the Electromagnetic Contactless Shaping and Directional Solidification of Plates of Stainless Steel and Supperalloy under VacuumMicrostructural Evolution of Undercooled Ni-40wt%Pb Hypermonotectic AlloyElectromigration Induced Metal Dissolution in Flip-Chip Solder JointsEffect of Material Properties on the Plastic Straining Capacity of Defective Welds Fitness-for-Purpose Assessment of Misaligned WeldsA Bonding Map for Cu and Al Plates by Pressure Welding at Cold and Warm TemperaturesNumerical and Experimental Study of the Electromagnetic Continuous Casting of SiliconElectrochemical and Optical Characterization of the Corrosion Resistivity of Explosively Bonded Al-Cu BimetalNitrogen Porosity in Nitrogen Bearing Austenitic Stainless SteelRheology and Foaming Characteristics of Melt for Metal Foam Sound Absorption Properties of Fiber and Porous MaterialsAnalysis of Negative Pressure in Solidifying Al-Si Alloy with Effect of Fluid Flow and Solid DeformationControl of Solidified Structure by Using Electromagnetic OscillationLining of Titanium Alloys with Hard Materials by Shot PeeningSolidification Interface Morphology in Narrow Channel during Unidirectional SolidificationUndercooled Melt Shaping of Al2O3-YAG Eutectic Composite by Melting the Al2O3-YAP Eutectic StructureNumerical Analysis of Deformation and Damage in Copper Alloy SheetPhysical Simulation and Metallurgical Evaluation of Heat-Affected Zone during Laser Welding of Ultrafine Grain SteelPrediction of Solid-Liquid Interface Stability and Dendritic Growth in Multi-Component Alloys with Calphad MethodNumerical Study of the Thermal-Solutal Convection and Grain Sedimentation during Globular Equiaxed SolidificationPrediction of the Tolerable Defect Size for Strain Based DesignThe Interaction of Weld Defects under Plastic CollapseMicrowave and Millimeter-Wave Processing of MaterialsSlag Cleaning Processes: A Growing ConcernEffects of Casting Conditions on the Mold Filling Characteristics of Mg Alloy in the EPC ProcessMicrostructure Evolution in a Directional Solidification ProcessA New Approach to Calculate Liquid-Vapor Surface Energy Using Sessile Droplet TestWeldability Approach to Duplex Stainless Steels Using Multicomponent Phase DiagramsEffect of Sb on the Graphite Morphology and Mechanical Properties in Heavy Section Ductile IronSpray Forming and Thermal Processing for High Performance SuperalloysRecent New Development of Spray Formed Ultrahigh-Carbon SteelsResearch on Ultra-High Strength Al-11Zn-2.9Mg-1.7Cu Alloy Prepared by Spray Forming ProcessSpray Forming of AZ91 Magnesium Alloys with and without Si AdditionSpray Forming of Homogeneous Bearing Steel of Minimized Distortion PotentialA Novel Spray Deposition Technology for the Preparation of Aluminum Alloy and Aluminum Alloy Matrix Composite Rings with Large DimensionsNumerical Heat Transfer Modelling in Spray Formed IN718 BilletsModelling Shape Evolution and Heat Flow of Spray-Formed Ring PreformsPID Control of Deposit Dimension during Spray FormingThe Flow Characteristic Study of Gas Spray Process in Baosteel Spray Forming EquipmentThe Study of Statistical Model of Mass Liquid Drop during Metal Spray Forming ProcessInfluence of In-Flight Particle Characteristics on the Forming QualityMicrostructure and Mechanical Property of Al 5083 Alloy Produced by Spray Forming and Hot ExtrusionInfluence of Aging Treatment on the Microstructure and Properties of Spray Formed CuNi15Sn8 AlloyEvolution of SiC Particle Distribution in Spray Codeposited SiCp/ 7075 Al Composites during ExtrusionSuperplastic Deformation Behavior of a Spray-Deposited Ultrahigh Carbon SteelMicrostructures of Spray Formed Superalloy GH742Influences of Temperature on Creep Properties and Mechanisms of Spray Formed GH742 SuperalloyMicrostructures and Properties of Spray Formed CuCr25 AlloyResearch on Preparation of Al-Fe-V-Si Alloy Enhanced by In-Situ TiC ParticlesHigh-Temperature Infiltration of Non-Metallic Articles Produced via Selective Laser SinteringGeometry and Heat Transfer Considerations in Rapid ManufacturingComparative Analysis of Different Methods of Rapid ToolingTransmission Electron Microscopy Study of Thermal Barrier Coatings Fabricated by Electron Beam-Physical Vapor DepositionNovel Zirconia Composite Coatings Fabricated by Twin Hybrid Plasma SprayingEffect of Thermal Spray Processing Techniques on the Microstructure and Properties of Ni-Based Amorphous CoatingsA Feasibility Study on Advanced Methodology to Produce High-Performance Nano WC-Co Granule Feedstock for Thermal SprayingSolid-State Synthesis of Magnesium Silicide via Repeated Plastic Working and Spark Plasma SinteringEffect of a-CNx Coating on Tribological Properties of SiC Ceramic in WaterMicrostructural Observation of Diamond Like Carbon Film Prepared from C2H2 / C5H6CH3 Plasma Beam SourceSelection of Binder Materials for Salt Powder LaminationAn Experimental Study on Superplastic Behaviors of Magnesium Alloy SheetBlow Forming of Recycled 5083 Al Alloy and AZ31 Mg Alloy by Solid State RecyclingMicrostructure Evolution and Fracture Behavior in Superplastic Deformation of Hot-Rolled AZ31 Mg Alloy SheetHigh Temperature Deformation Behavior of AZ31 Mg AlloyEffect of State of Stress on the Cavitation Behavior of Al 5083 Superplastic MaterialSuperplastic Behavior of As-Equal Channel Angular Pressed 5083 Al and 5083 Al-0.2 Sc AlloysSuperplasticity and Deformation Mechanism of LD10 Aluminium AlloyAn Investigation of Cavity Growth Rate in Superplastic Al and Mg AlloysDeveloping High Strain Rate Superplasticity in Aluminum AlloysLoad Relaxation Behavior of Ultra-Fine Grained Ti-6Al-4V AlloySuperplasticity and Fracture Morphologies during Superplastic Deformation of a Commercial TC6 Titanium AlloyDeformation Behavior of Ti-6Al-4V and Ti-6.85Al-1.6V Alloy with a Globular MicrostructureA Study on Mechanical Behavior and Microstructural Evolution in the Superplastic Deformation of Ti75 AlloySuperplastic Extrusion of Al2O3-YTZ Nanocomposite and Its Deformation MechanismHigh Strain-Rate Superplastic Flow in ZrO2-30vol% Spinel CompositeCrystallization during Superplastic Deformation in a Zr65Al10Ni10Cu15 Glass Metallic AlloySuperplasticity and Sinter-Forging of Fine-Grained Si3N4-Si2N2O CompositeSuperplastic Behavior and Cavitation for WC-Co Cemented CarbidesMicrostructural Evolution and Deformation Mechanisms for Superplasticity of NiAl IntermetallicThe Effects of Free Space in Mould Cavity on Sandglass ExtrusionThe Influence of Deformation Condition on Microstructure and Properties of GH4169 AlloyOn the Low Strain Rate Regime of Structural Superplasticity - an Internal Variable ApproachThreshold Stress for Super Plastic Flow in Spatially Extended Crystalline SystemsInfluence of Stress State on Superplastic Deformation Behavior in a Zn-Al Eutectoid AlloyApplication of Superplastic Flow to Manufacturing of Microcellular Aluminum FoamsSuperplastic Forming of Aluminum Alloy Car Body PanelsSuperplasticity and Crystallographic Orientation Distribution in Friction Stir Processed Sheet of an Al-Mg-Mn AlloySuperplastic Deformation and Microstructure Evolution of Friction Stir Weld of 1420 Al-Li AlloyApplication of Superplastic Forming and Diffusion Bonding in the Aerospace IndustryCorrelation between the Microstructure and Forces Generated during Friction Stir Processing of AA5052Research and Application of Superplastic Forming Titanium Alloys for Commercial Aircraft PartsA Study on Gas Pressure for Superplastic Forming of Titanium Alloy BellowsApplication to Seismic Dampers in High-Strain-Rate Superplastic Zn-Al AlloyA Study on Material Flow in Combined Extrusion ProcessApplication of Processing Method Enlarging a Partial Diameter to Shaft Parts of Practical SizeMaterial Flow Characteristics on the Forward and Backward Solid Extrusion ProcessTowards the First-Principles Investigation of Ordering DynamicsA Modeling Study of Cyclical Phase TransformationsDefect Properties in GaN: Ab Initio and Empirical Potential CalculationsPoint Defects and Re in L12 Ni3Al: Atomic StudiesFirst-Principles Calculations of Titanium Dopants in AluminaAlloy Design Based on Molecular Orbital MethodDensity Functional Calculations on Electronic and Magnetic Properties of Fe-Pt SystemsEffect of Alloying Elements on the Electronic Structure of NiAlStability and Structures of Constitutional Defects in Nonstoichiometric Intermetallic Compounds by First-Principles CalculationsAtomic-Scale Computer Simulation of Mixture Precipitation Mechanism for Ni75AlxV25-x AlloyTheoretical and Experimental Ti-K NEXAFS of Various Ti-OxidesAlloying Effect on the Electronic Structure of LaNi5-Based Hydrogen Storage AlloysTheoretical Investigation of Fe-Based Phase Equilibria from the First-PrinciplesElectron Structure and Interface Energy of GP Zone in Al-Zn AlloyModeling of Dendritic Structure during Solidification Process Based on Cellular Automaton ModelModeling of Columnar-to-Equiaxed Transition in Solidified Al-Si AlloysThermo-Calc Program Interface and Their Applications - Direct Insertion of Thermodynamic and Kinetic Data into Modelling of Materials Processing, Structure and PropertyMonte Carlo Simulation of Cube-Texture Evolution during Grain Growth of High-Purity NickelSimulation and Determination of the Goss Texture in Grain-Oriented Silicon SteelBainitic Transformation Model in Low Alloy Carbon Steels Considering the Effect of Reaction Constant in JMA EquationMonte Carlo Simulation of Configurational Anisotropy of Magnetic ClusterReorientation Phase and Striped Domain Patterns of Thin FilmsEffect of Austenite Grain Size on Martensitic Transformation of a Low Alloy SteelGrain Growth Simulation Based on Potts Model with Different ParametersFE Simulation of Grain Size during the Isothermal Forging of a TC6 Titanium Alloy DiscStudy for Step Instabilities Induced by ES BarrierModelling of Solid-State Diffusion Bonding with a Real Rough SurfaceThe Ground States of the FCC Alloy FilmsSuppression of Anomalous Interface Effects by Localization of Solute Redistribution in Thin Interface Phase-Field Modeling of SolidificationNumerical Simulation on the Solidification of ZA27 Alloy by a Two-Phase Flow ModelStudy on Effect of Technical Parameter on Fluid Flow and Solidification in Steel Strip Roll-Casting ProcessMathematical Simulation of Different Argon Blowing Style in Ladle FurnaceSimulation Study of Thermal Buoyance Influence on Flow Characteristic in Single Outlet TundishAn Eulerian Finite Element Analysis for the Steady State Rolling ProcessAnalysis of Alligatoring Behavior during Roll Pressing of DRI Powder with Flat Roller and Indentation-Type RollerAnalytic Model for Non-Steady State Heat Transfer of Powder Pressing RollerA Numerical Analysis on the Dissimilar Channel Angular Pressing Process by RollingCold Rolling Technique for Eliminating Cutting Process in Manufacturing Precise Product Using Non-Heat-Treated Micro AlloysRigid-Plastic Finite Element Analysis Applied Frictional Contact Problem in the Composite Rod Extrusion ProcessAn Analysis for the Shaft Fitting Process to Inner Raceway of a Ball BearingForming Technology for Cold Forging Processes of Ball Stud Using Non-Heat-Treated Cold Forging MaterialsA Numerical Analysis of Powdered Metal Compaction Processes for Two-Level Flanged Solid Cylindrical ComponentsAn Analysis of the Riveting Process as 2-D Frictional Contact ProblemA Marco-Homogenous and Micro-Heterogeneous Model for Self-Propagating High Temperature Synthesis (SHS)Numerical Simulation of Distortion Control by Static Thermal Tensioning in Welding of Thin Aluminum Alloy PlatesA Study on the Manufacturing Process Sequence of Power Assisted Steering PartA Design of Manufacturing Processes for Valve-Spring Retainer ComponentOptimum Design of a Pilger Mill Process for Wire Forming Using CAD/CAENumerical Simulation of Tube-Bending Process with Internal Pressure for Titanium Alloy TubeOptimization of Tube Hydroforming Process by Using Fuzzy Expert SystemFinite Element Simulation and Experimental Research on the Internal Rolling Connection for Titanium Alloy TubesMolecular Dynamics Simulation of Compressive Mechanical Behavior of Nanocrystalline FeTension-Compression Asymmetry in Plasticity Modeling of a Single Crystal Superalloy Using a "Unit Cell" ApproachFinite Element Analysis for the Transverse Mechanical Behavior of Fiber-Reinforced Three-Phase Metal-Matrix CompositesThree-Dimensional Finite Element Modeling for Biomaterial Selection and Shape Design of the Nucleus ProsthesisThe Effects of the Heating Conditions on the Hydro-Formability of the Aluminum Alloys at High TemperaturesFuzzy Modeling of Mechanical Properties of Cobalt-Free Maraging SteelFuzzy Modeling of the Magnetostrictive Hysteresis for TbDyFe ActuatorSimulation of Structural Parameters and Superconducting Transition Temperature of MgB2 under PressureThe Prediction of Failure Pressure of Gas Pipeline with Multi Corroded RegionEvaluation of Wagner Interaction Parameter in Fe-Mn-Si-Nb-Ti-V-C SystemAging Properties Prediction of the Lead Frame Cu-Cr-Sn-Zn Alloy via Neural NetworkBounds of the Thermal Conductivity in Discontinuously Reinforced Metal-Matrix CompositesThermo-Calc and DICTRA Enhance Materials Design and ProcessingDissociated Domain Boundaries Attached to Meta-Dislocations in a Structurally Complicated Alloy Phase ?'-Al-Pd-MnNano Atom Clusters and Their Long-Range Quasiperiodic Arrangements in Al-Ni-Ru Decagonal QuasicrystalCorrosion of Al-Cu-Fe-Cr Quasicrystalline CoatingSynthesis and Mechanical Properties of Conventionally Cast Icosahedral Particle-Reinforced Al-Mn(-Cu)-Be-Si AlloysThe Electronic Characteristics of IrSi Thin FilmsSynthesis and Properties of GaN NanostructuresUpper-Bound Velocity Limit for Free-Jet Melt SpinningMOCVD Growth and Annealing of Gallium Oxide Thin Film and Its Structural CharacterizationFormation and Optimization of Cu-Based Cu-Zr-Al Bulk Metallic GlassesCrystallization Kinetics of Zr65Ni25Ti10 Metallic Glass AlloyInfluence of Nb on the Interface Structure of Tungsten Fiber Reinforced Zr-Based Bulk Metallic Glass CompositesInvestigation of the Bulk Nd60-xDyxFe30Al10 (x=0, 2, 5) Amorphous AlloysFabrication of Fe-Based Glassy Cores with High Saturation Magnetization and Good Soft Magnetic Properties by Spark Plasma SinteringScanning Anomalous Small-Angle Scattering as a Tool to Examine Welded Bulk GlassGlass-Forming Ability and Mechanical Properties of Fe-Ni-Zr-Si-B Bulk Glassy AlloysEnhancement of Plasticity in Ti-Based Bulk Metallic GlassEffect of Alloy Composition on the Glass Forming Ability in Ca-Mg-Zn Alloy SystemSynthesis of Cu-Based Bulk Metallic Glass Matrix Composites by Warm Processing of Gas Atomized PowdersHole Punching onto the Zr65Al10Ni10Cu15 BMG Sheet Fabricated by Squeeze CastingDevelopment of Ni-Nb-Ta Metallic Glass Particle Reinforced Al Based Matrix CompositesTi-Based Bulk Metallic Glass with High Cold Workability at Room TemperatureDevelopment of Ni-Zr-Nb-Al-M(=Ta,Ti,Y) Metallic GlassWear Properties of Bulk Amorphous Zr41.2Ti13.8Cu12.5Ni10Be22.5 Alloys for CrystallizationCu-Zr-Ti Bulk Metallic Glass Composites Produced by Mechanical Alloying and Vacuum Hot-PressingGlass Forming Ability in Amorphous Ti50Cu35-xNi15Snx Alloys Prepared by Mechanical AlloyingGrain Growth and Mechanical Properties of Nanograined Bulk Fe-25Ni AlloyNucleation Barrier for the Precipitation in Nanosized Al-4wt%Cu AlloyFormation of Fe86Zr5.5Nb5.5B3 Nanocrystalline Bulk Alloy under High PressureEffects of Constraint and Strain Path on Evolution of Ultrafine Grained Microstructure by Multi-Axial Alternative ForgingFemtosecond Laser Driven Shock Quenching of the Nanocrystalline High-Pressure Phase of IronEtching Mask Effect of the Nanoscratched Borosilicate Surface and Its Application to Maskless Pattern FabricationTextures and Grain Growth in Nanocrystalline Fe-Ni AlloysSoftening Phenomenon during Compression Test in Nanograined Aluminum AlloysFabrication and Property of Amorphous/Nano Crystalline Al84Ni10Ce6 Bulk Alloy by a Powder ForgingMechanical Properties of SPD (Severe Plastic Deformation) Processed CopperOn Structural Stability of Nanostructured AluminiumStructure Changes in Stainless Steels Used in Nuclear Reactors and Turbo Generators after Minor Low Cycle Fatigue DeformationA New Method for Bulk-Quantity Synthesis of Patterned Well-Aligned ZnO Nanowire ArraysLarge-Scale Synthesis of In2O3 Nanowires and Their CharacterizationLow Temperature Synthesis of PbTiO3 NanoparticlesSynthesis and Investigation of Micro-Tribological Behavior of WS2 NanotubeRaman Scattering and Photoluminescence Studies of Zn1-xMnxO Nanowires via Vapor Phase GrowthSynthesis and Characteristic of Cuprous Oxide Nano-Whiskers with Photocatalytic Activity under Visible LightSynthesis and Characterization of ZnO Nanowires Using a Simple PVD Approach without CatalystsX-Ray Diffraction and Raman Scattering Study of Sr1-xBi2+yTa2O9 NanoparticlesPreparation of Size Controllable MgO Nanoparticles via Reverse Microemulsion MethodCharacterization of Fe Based Nanopowders Synthesized by Gas Phase SynthesisMechanism on Growth of Carbon Nanotubes Using CO-H2 Gas MixtureCu Oxide Nanoparticle Formation: Effects of Curing TimeEffect of H2 Gas on Carbon Nanotubes SynthesisQuasicrystal Formation in the System Zr75-xTixCu25-yNiyMechano-Synthesis and Characterization of Fe-Co Based Nanocrystalline Magnetic MaterialsPreparation and Microwave Permittivity of Nano-Sized Si/C/N PowderSynthesis of Bamboo-Shaped Gallium Nitride NanorodsRapid Synthesis of Zinc Oxide and Lead Oxide Nanorods by One-Step Solid-State Reaction Methods at Ambient ConditionsThe Field Emission Properties of Sub-Micrometer Diamond Tube Arrays Fabricated by Focused Ion Beam PatternField Electron Emission from Carbon Nanotube Films on Diamond FilmsThe Comparison Study of Field Emission Characteristics from (002)-Oriented AlN and W TipPreparation and Field Emission Characteristics of CNx Nanotubes Thin FilmPreparation of Diamond Film Coatings on Multi-Spectrum ZnSThe Fabrication and Performance of CVD Diamond-Based X-Ray DetectorsFabrication of Structure-Designed Free-Standing Diamond FilmAnalysis of Interface between Free-Standing Diamond Films and Mo SubstratesThe Thermal Annealing Effect on the Residual Stress and Mechanical Property in the Compressive Stressed DLC FilmLow Stress Tetrahedral Amorphous Carbon Films Prepared by Filtered Vacuum Arc DepositionInfluence of Film Thickness on Intrinsic Growth Stress and Raman Evaluation of Tetrahedral Amorphous Carbon FilmsMicrostructures and Properties of the DLC Films Prepared by PLD Process Using High Power High Frequency 308 nm Laser BeamImprovement of Adhesion of Cubic Boron Nitride Films: Effect of Interlayer and Deposition ParametersEvolution of Stress-Induced Surface Damage and Stress-Relaxation of Electroplated Cu Films at Elevated TemperaturesMicroscopic Investigation of Strain Localization and Fatigue Damage in Thin Cu FilmsPhase Separation into Nano-Crystalline Nitrides in Ternary Ti-Si-N System via N ImplantationTiC/a-C Nanocomposite Coatings for Low Friction and Wear ResistanceThe Evaluation of Adhesion Energy in Thin Compressively Stressed Film by Using Delamination Buckle and Freehang BuckleComputer Simulations on Mechanical Properties of Molecular Deposition FilmStress Induced Anisotropic Diffusion during Plasma-Assisted Nitriding of a Ni-Based AlloyNumerical Simulation and Experimental Evidence for Surface Modification by High Current Pulsed Electron BeamA Novel Efficient Blue Organic Light Emitting StructureEffects of Annealing on the Structure and Photoluminescence of Amorphous SiC:Tb Films Deposited on Porous SiliconInfrared Transmission Performance of Gallium Phosphide Thin Films Deposited by RF Magnetron SputteringLaser Induced Preparation of Flexible Cold Cathode and Its Electron Emission PropertiesMicrostructure and Optical Properties of (Zr0.8, Sn0.2)TiO4 Thin Films Grown on Si(100) Substrates by a Sol-Gel ProcessOptical and Electrical Properties of Transparent Conductive ITO Thin Films under Proton Radiation with 100 keVPhotoluminescence of SnO2 Films Prepared by APCVDPhotoinduced Changes in Sn-Doped Sol-Gel Silica Glass FilmsOptical Properties of Silica Films Prepared on SapphireThe Morphology and Optical Characterizations of AlGaN/GaN Based on Al2O3 Prepared by MOCVDThe Temperature Dependence of In Desorption during InN Growth and AnnealingAnalysis of Optical Properties and Structure for CdS FilmsEffect of Annealing Temperature on Characteristics of Ni76Fe24 Films Deposited on SiO2/Si(100) by DC Magnetron Co-SputteringGranular Structure and Magnetic Properties of FePt/C FilmsMagnetic-Transport and Microstructure of FeNi-Cu Nanogranular FilmsMicrostructural and Magnetic Properties of C/Co/C Pseudo-Sandwich Granular Films by Facing SputteringTbFe2/a-Fe Nanocrystalline Exchange Coupling Magnetostrictive FilmsNumerical Calculation of Kerr Spectra for Magnetic Multilayered and Granular FilmsPreparation of Oriented Fe2O3 Film on Glass/Si Substrate by Atmospheric MOCVDStudies on the Heterostructure of Fe Film on Si SubstrateThe Influences of Depositing Angles on TbFe Film Magnetic and Magnetostrictive CharacteristicsTransport Properties in YBa2Cu4O8/La0.67Ca0.33MnO3 MultilayersMicrostructural Evolution of MgB2 Layers Prepared by Post Annealing of Evaporated Boron and Co-Evaporated MgBx (x = 1.1~4.3) FilmsSynthesis of Surface Acoustic Wave Filter with Al/ZnO Thin Film Deposited on Silicon WaferMicrostructure and Electronic Properties of Al/Zr/LiNbO3 MultilayersFinite Element Analysis of Nano/Micro Pattern Fabrication by Nanoscratch ProcessThe Growth of GaN Films on Si Substrates by HVPENano-Structures and Properties of Zinc Nitride Prepared by Nitridation TechniqueLaser Doping and Recrystallization for Amorphous Silicon Films by Plasma-Enhanced Chemical Vapor DepositionEffect of Pt Interlayer on Thermal Stability of NiSi FilmsElectric-Pulse-Induced Reversible Resistance Change Effect and Its Fatigue Behavior in Manganite Perovskite FilmsHigh-Quality Semiconductor Carbon-Doped ?-FeSi2 Film Synthesized by MEVVA Ion ImplantationSurface Morphology, Structure and Transport Property of NaxCoO2 Thin Films Grown by Pulsed Laser DepositionMonolayer Formation of Colloidal Nanoparticles on Various Substrates by Single and Multiple Dip-Coating ProcessEvaluation of Nano-Size Defects of Chromium Layers by Small Angle Neutron ScatteringEffects of Heat Treatment on Microstructure of Sputter Deposited TiNiPd Film on Si WaferCharacterization of Chromium-Carbon Layer Fabricated by Electrodeposition in Trivalent Chromium BathMicrostructure, Phase Sequence and Superelasticity in Highly Oriented MBE-Grown NiTiCu Shape Memory Thin FilmsOptimization of a Concasting Technology via a Dynamic Solidification Model of a Slab CasterModification of Electroless Nickel-Plating Coatings with Sol-Gel FilmStudy of Microwave-Absorbing Property of Nanometer Multi-LayerNanoparticles and Films Formed by Pulsed Laser Irradiation on the CeO2 Target in the LiquidThe Evaluation of Elastic Modulus at Grain Boundaries for Polycrystalline MaterialsThe Influence of La on the Corrosion Resistance of Hot-Dip Aluminized SteelThe Investigation of Microstructure of Pt/Ti Explosive Clad InterfaceAtomic and Electronic Structures of Cu/Sapphire Interfaces by HRTEM and EELS AnalysesEffect of Grain Boundary Character Distribution on Stress Corrosion Cracking Behavior in Austenitic Stainless SteelsCurrent-Voltage Characteristic and Grain Boundary Structure in Undoped and Pr and Co Doped ZnO BicrystalsDistribution of Plane Matching Boundaries for Different Types and Sharpness of TexturesIn Situ HREM Studies of Grain Boundary Formation during Solidification of B-Doped SiliconSpreading Dynamics of Tin, Bismuth and Some Lead-Free Solders over Copper SubstrateStructure and Properties of Ti-Al Intermetallic Layers Produced on Titanium Alloys by a Duplex TreatmentThe Use of Trimethylaluminum for Producing Surface Layers by the PACVD MethodControl of Boundary Structure and Grain Growth for Microstructural DesignHydrophilic Properties of TiO2-Al2O3 Composite Thin FilmsProperties of DLC Films Produced by Pulsed Laser Induced Arc DepositionProcess of Film Formation By Anodizing AZ91D Magnesium AlloyStudy of Electronic Structure In Ni3Fe/Al2O3/Ni3Fe Magnetic Tunnel Junction with Various Ferromagnetic Layer ThicknessesDevelopment of Wear Resistant Zirconium Oxide Thin Films on Stainless Steel SubstratesA Control of the Nanopore Regularity in Alumina LayerAnnealing Effects on the Structural Properties of Gold Films on Si by the RF Magnetron Sputtering Microstructural and Mechanical Properties of TiC, TiB2 and VC with Low Carbon Steel Surface Alloy Fabricated by High Energy Electron Beam IrradiationEffect of Colloidal Silica Addition and Pre-Coating on the Microstructure Change of Cathode Copper Electrodeposited FilmThe Evaluation of the Elastic Property in Nano-Scaled Thin Compressive Film on Patterned Substrates A New Low Alloy High Speed Power Hack Saw BladesAn Experimental Study on 3D Forming of Sheet Metal Using Plasma ArcMechanism of Enhanced Wear-Resistance of the Ti-Mo Modification Layer Mechanical and Tribological Properties of Ti6Al4V Hardened by Double Glow Plasma Hydrogen-Free Carbonitriding Plasma Surface Alloying W-Mo Low-Alloy HSSSurface Treatment of Materials with High Current Pulsed Electron BeamSurface Modification of Superfine Aluminum Oxide PowdersImproving the Microwave Absorbing Property of Fiber Reinforced/Resin by Surface Modification of Fiber through Ion ImplantationThe Influence of NiCrAlY Coatings Prepared by LPPS and EB-PVD on the Damping Properties of 1Cr18Ni9Ti AlloyFailure Mechanism of D-Gun Sprayed Thermal Barrier Coatings Subjected to Thermal Shock CyclingHigh Quality Ceramic Coatings Sprayed by High Efficiency Hypersonic Plasma Spraying GunInfluence of Service Temperature on Grain Growth and Thermal Diffusivity of Nanostructured Thermal Barrier CoatingThe Influence of Impulse Electroless Plating on Amorphous Ni-P Alloys in Structure and Hot StabilityFEM Simulation Study on Relationship of Interfacial Morphology and Residual Stress in TBCsCharacterization and Evaluation of EB-PVD Thermal Barrier Coatings by Impedance Spectroscopy Magnetron Co-Sputtering of Nanostructured Chromium Aluminium Nitride CoatingsEffect of Solution Chemistry and Electroplating Conditions on the Deposition Rate and Wear Resistance of Eco-Friendly Trivalent Chromium Layers Effect of Chromium Addition on the Corrosion Behavior of WC Cermet Coatings in Strong Acid EnvironmentStructural and Magnetic Properties of Exchange Spring Type FePt/Fe MultilayersTransparent Barrier Coatings on Flexible Polyethersulfone Substrates for Moisture-Resistant ApplicationsCorrelation Exchange Length in Nanocrystalline Soft Magnetic Materials Characterized by Electron HolographyA Simple Method of the Electric/Magnetic Field Observation by a Conventional Transmission Electron MicroscopeCrystallization under 1 MeV Electron Beam Irradiation of Nanometer-Sized W-Dendrites Fabricated on Alumina Substrates with Electron-Beam-Induced DepositionEffect of Hydrogen on Dislocation Behavior in Ni-Cr AlloysHVEM Study of Crack Tip Dislocations in Silicon CrystalsMicrostructures after Processing by Aging and ECAP for Al-Mg2Si Alloys Containing Excess Si or MgSynthesis of Perovskite-Type LaMnO3 under Hydrothermal ConditionsOn the Stability of Defects and Grain Size in Ultrafine-Grained Copper during Cyclic Deformation and Subsequent Ageing at Room TemperatureA New Scheme for the Exit-Wave Reconstruction from a Small Set of Focus Series of HREM ImagesStudy of Bonding of Grain Boundaries in Steels Using EELSSurface Cleaning Effects of Silicon Substrates by ECR Hydrogen Plasma on Subsequent Homoepitaxial GrowthObservations of Carbon Nanotube Field Emission Failure in the Transmission Electron MicroscopeElectron Holography Characterization of Potential Barrier in a Spin Valve Structure with Nano-Oxide LayersWetting and Contact Properties Studied Using the Nanoprobe SystemSpatially Resolved Core Level Spectroscopy of NanotubesNiobium Doped Potassium Titanate Nanowires and NanobeltsSynthesis and Optical Properties of Metal Nanoparticles Embedded in Porous Anodic Alumina OxideDirect Tensile Tests of Individual WS2 NanotubesInfluence of Baushinger Effect on Yield Strength after Pipe FormingEffect of Inhomogeneity of Carbide Precipitation on Nanohardness Distribution for Martensitic SteelsEvaluation of Grain Boundary Effect on the Strength of Fe-C Martensitic Steels through Nanoindentation TechniqueUltrasonic Evaluation of Cyclically Deformed Microstructures of Cu and Cu-35Zn AlloyEffects of Hydrogen on Tensile Properties of SA508 Cl.3 Reactor Pressure Vessel Steel at High TemperatureEffects of Microstructure on the Fatigue Resistance of Steel Tire CordsWater Vapor Oxidation Behavior under High-Temperature and Pressure Conditions of the Nitrided Alloys for Steam Turbine Valve System PartsHigh-Temperature Wear Properties of the Nitrided Alloys for Steam Turbine Valve System PartsEffect of Heat Treatment Conditions on Tube HydroformabilityInspection of Creep Defects and Degraded Zone Using UltrasoundFatigue Microcrack Plastic Zone Size DeterminationMicrodiffraction Study of Polycrystalline Copper during Uniaxial Tension Deformation Using a Synchrotron X-Ray SourceCharacteristics of Photocatalytic Titania Fabricated by AnodizationThe Effect of the Graphitizing Heat Treatment and Boron Content on Boron Distribution in High Carbon SteelApplication of Monte Carlo Simulation Method to the Nano-Scale Characterization by Scanning Electron MicroscopyA Comparative Study on Preparation of TiO2 Pellets as Photocatalysts Based on Different PrecursorsThe Forming Characteristics of Simultaneous Radial-Forward Extrusion ProcessesFormation of Single Crystal Nanowires of GaN on the Si SubstratesFlux Growth and Dielectric Properties of Relaxor-Based Pb(In1/2Nb1/2)O3-PbTiO3 Single CrystalsThe Orientation Characterization of Single Crystal Superconductor Film with 2-Dimensional X-Ray DiffractionWear Mechanism of Nano-Structured Surface Layer under High Impact EnergyFracture Behavior of a Shape Memory Alloy at High Loading Velocity and High Temperature A Process Sequence Design of Multi-Step Cold Extrusion Process for Hollow PartsCharacterization of Submicron Mechanical Properties of Al-Alloy Foam Using Nanoindentation TechniqueDeformation Characteristics in Radially Extruded Tubular PartsCorrosion Behavior of 316L Stainless Steel in Supercritical Water EnvironmentEffect of Creep Holding Time on the Fatigue Behavior in P92 Steel Weldment at High TemperatureExperimental Analysis for the Tubular Hydroformability of Aluminum Alloys at Elevated TemperaturesFinite Element Analysis of the Compaction Processes for Hollow Three-Level (Class IV) ComponentsHigh Pressure Wear Characteristics of Alloyed Ductile Cast Iron - Effect of Cu, Mn, Si and MoInfluence of Thermal Treatment on the Caustic SCC of Super Austenitic Stainless SteelOxide Growth Mechanism and Oxidation Resistance in Mechanically Alloyed Ni-20Cr-20Fe-5Nb-1Y2O3 AlloyStructure Centric Education in Materials EngineeringNano-Structured Thin Films: A Lorentz Transmission Electron Microscopy and Electron Holography StudySegregation Effects on the Metal-Carbide InterfaceWell-Ordered Self-Assembly Growth of Strain-Modulated SrTiO3 Thin Films: Templates for Complex Oxide Quantum WiresA Simplified Model for Velocity and Temperature Evolution of Alloy Droplets in Centrifugal Atomisation and Spray Deposition
