Buch, Englisch, 1920 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 3600 g
ISBN: 978-3-03785-075-6
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preface and Organizing Committee
Chapter 1: High Performance Structures and Materials Engineering
Comparison Research on the Structural Elements of Two Business Models with the Different Performance Level
An Empirical Study of the Relationships between Information Systems Strategy and Firm Performance
Detection for Position of Suspended Transparent Film in the Water
Ab Inito Study of Absorption Spectra in Ultra Small Diameter Single Walled Boron Nanotubes
Preparations Effects on Amorphous/Nanocrystal Ni-Mo Alloys Structure and Properties
Recognition of Vehicles on Geometric Morphology
Control Design Applied to a Micro Electro Mechanical System: MEMS Comb Drive
Multinodal Load Forecasting in Power Electric Systems Using a Neural Network with Radial Basis Function
Molecular Dynamics Simulation of Diffusion Behavior for Thermalplastic Fusion Bonding
Water Absorbing and Releasing of Lightweight Aggregate and its Influence on Frost-Resistance of Combined Aggregate Concrete
Hierarchical Partition Approach with Application on Enterprise Credit Assessment
Comparison Research on Determination of Contact Loads with Finite Element Method and Mode Superposition Method
Erosion-Resisting Properties for Chloride Ion of Short-Chopped Basalt Fiber Reinforced Concrete
Study on the Preparation of Chitosan/PVA Sustained - Release Microspheres
Preparation of Palladium Nano-Particles by Electrospinning and its Application in Hydrogenations
A Study on Soft Water Attack Resistance of Concrete
Study of Fracture Behaviors of 20g Steel under Short Period High Temperature and Thermal Shock Condition
Preparation and Characterization of (HAp/SiO2)/Ti Biocomposites
Temperature and Strain Rate Dependence of Deformation Microstructures of AZ31 Magnesium Alloy under Uniaxial Tension
Microstructural Characterization of “New” 2.5D Woven Reinforcement Materials
Crack Growth Direction Analysis Based on Elastic-Plastic Property of Material
Effect of Elevated Temperature on the Flutter Characteristics of FGM Panel
Experimental Study on Mechanical Properties of High-Strength Concrete Using Blast Furnace Slag Fine Aggregate
A Novel Transient Improvement with Overshoot Suppression
Structural Deformations Analysis of Carbon Filament-Wound Composite Pressure Vessels under Internal Pressure
Fracture Behavior and Crack Growth Rate of Al-Li Alloy Friction Stir Welded Joints
Seismic Reaction Analysis on High-Rise Isolated Structure with Multi-Tower
Study on Tear Propagation of a Fabric Laminate in Biaxial Stress
Prepared and Microwave-Absorption Properties of SiC Coated Ni Nanocapsules
A New Design of Inflatable and Lightweight Device for Planetary Exploration
Synthesis and Characterization of Ti, Fe-Doped Mullite-I
Synthesis and Characterization of Ti, Fe-Doped Mullite-II
Comparative Study on HPC Mix Design Methods
Evaluation of Fatigue Properties for Ultraviolet Radiation Aged Bitumen and Mixture
Dynamic Response Analysis of Stress Intensity Factors of Reflective Cracking in Asphalt Overlay Suffer Wheel Load
Research of the Sensitivities of Fracture Strength of Porous Ceramic Materials to the Relevant Parameters
Screw Inspection Optimized System Design and Implementation
Study on the Energy Saving Control of Groundwater Source Heat Pump Air Conditioning System Based on Integrated Optimization Viewpoint
Fuzzy Comprehensive Assessment Methods on the Multi-Objective Decision of Hot Water Supply System Plans of Residential Buildings
An Enhanced Luminescent CdTe/ZnS Core-Shell Quantum Dot: Synthesis, Characterization, and its Optical Properties
Preparation and Characterization of the Core/Shell Structured of CdTe/Ni Fluorescent-Magnetic Particle
Study on Statistical Damage Constitutive Model of Rock Basing on Thermdynamics
Study on the Method of Designing Sound Absorption Model by Multiple-Layer Structures each Layer’s Natural Impedance
A Computational Algorithm for a Spatial Serial Robot
Influence of Quenching Parameters on Mechanical Properties of 7075 Aluminum Alloy
Investigation on the Bonding Mechanism of M42 Powder High-Speed Steel and 45 Steel
Magnetic P(St-MA) Microspheres:Preparation, Characterization and Interaction with BSA
The Analysis and Research on the Reliability of Concrete Pavement
Study on Management Control Auditing on Construction Project
The Risk Assessment and Control Technology to Engineering Schedule
The Effect of POSS-NH2 on the Curing Reaction of Cyanate Ester Resin
Mechanical Properties and Micromorphologies of Methyl- Silsesquioxane/Cyanate Ester Resin Organic-Inorganic Hybrids
Evaluation of Mechanical Properties of Wollastonite/SBR Composite
Improvement the Elongation at Break of Reclaimed Rubber
UV-Curable Organic-Inorganic Hybrid Films Based on Epoxynorbornene Linseed Oils
Theoretical Prediction and Experimental Research on the Tensile Strength of GF-TPU Composite
Study on the Lipid-Lowering Effect of Water-Soluble Chitosan Nanoparticles and Microspheres In Vitro
Influence of RE/Mn (RE= La, Nd and Gd) Ratios on the Infrared Absorption and Emission Properties of Co-Zn Ferrites
Testing Study on Ratio of Crack Widths on Two Sides of Protective Covering of Steel-Lined Reinforced Concrete Penstock
Characterizations of Plating Structures and Electromagnetic Shielding Properties of the Micron-Sized Flaky Silver-Coated Copper Powder
Study on Job Shop Scheduling Optimization with Multi-Objective
Investigation on Mixed Mode Stress Intensity Factors for Inclined Surface Crack in Finite-Thickness Plates and Parameters Influence
Image Classification for Steel Strip Surface Defects Based on Support Vector Machines
Study on the Application of Viscoelastic Material in Sound Absorption Structure Model
Study on Integrated Properties of PP Composites Filled with Rice Husks Powder
Numerical Simulation Technology for a Full Cycle of Steel Line Pipe Manufacturing Operations
Distribution of the Molecule Weight and Grain Size of Medium Temperature Phenol Formaldehyde Resin
Flexible and Vibration Characteristics Simulation for the Large Megawatt Size Wind Turbine Blades
Synthesis and Characterization of Hierarchical Zeolite with High Mechanical Stability
Consistency of JIC and KIC on Characterizing the Fracture Toughness of Small Size Samples
Study on the Structure and Property of Ultra-Fine Denier PET Full Drawing Yarn: Effect of Draw Ratio and Take-Up Velocity
A Fuzzy Temporal System and its Characteristic Set Representation
The Asymptotic Homogenization Method of the Settlement Calculation of the Cement-Soil Pile Composite Foundation
The Research on Image Segmentation for Fingerprint Identification
Measurement of Dynamic and Static Modulus for Thin Particleboard
Determining Modulus of Elasticity of Ancient Structural Timber
Noise-Robust Speech Recognition Based on RBF Neural Network
The Influencing Factors in Acoustic Nonlinearity Parameter B/A Measurement
Scraper Conveyor Dynamic Modeling and Simulation
Optimization Research on Structure Improvement of Stirring System for Preparation of Recycled Glass / Aluminum Matrix Composites with Stirring Casting Technique
Improved Thermal Conductivity of Compostie Particles Filled Epoxy Resin
Blast Loads on Concrete Bridges
Research and Simulation of Routing Protocol in Different VANET Scenarios
Effect of Calcium Modification on the Microstructure and Properties of High Speed Steel
Study on the Solidification Microstructure of Aluminum Alloyed High Speed Steel
The Maximum Detection Thickness for Flatness Detecting System of Hot Rolled Strip
Relation Expression and System Design for District Collaborative Design
Analysis of the Research Management System Based on Web Technology
Research on Hierarchical Evaluation of Information System Agility
Novolak Type Phenol Formaldehyde Resin from Waste Brown-Rotted Wood
Influence of Resin Content on Composite Materials Railway Sleepers for Physical and Mechanical Properties
Mechanical Properties of Cement-Free Bauxite Based Castables Bonded by Hydratable Alumina
Residual Life Assessment for Ferromagnetic Components Based on Metal Magnetic Memory Technology
Research on Main Performance and Impact Factor of Flakeboard through the Method of Partial Least Square Regression
Surface Flashover Performance of Ion-Exchanged Machinable Glass Ceramics Material in Vacuum
Comparative Study on the Application of Naphthalene Water-Reducing Agent and Polycarboxylate Water-Reducing Agent in High-Performance Concrete
A Platform for Applications in Wireless Body Area Sensor Networks
Second-Order Nonlinearity of Organic/Inorganic Hybrid Materials Doped with Organic Chromophore by All-Optical Poling
The Calculation of Unit Water Use in Recycled Concrete
A Technology of Robot Simulation and Control
All-Optical Poling Properties of the Host-Guest Adulterant Thin-Films
Rheological Behavior and Mechanical Properties of PVC/V-POSS Nanocomposites
UV-Curable Coating of Epoxy-Acrylate/Polyurethane-Acrylate Nanocomposites Modified with V-POSS
Systhesis, Curing and Thermal Propertied of Boron-Containing o-Cresol-Formaldehyde Resin
Load Stress Analysis of Airport Pavement Based on Multi-Structural System
Effects of Heat Treatment on the Magnetic Properties and Dimension Accuracy of Fe-12%Al Soft-Magnetism Alloy
An Agent-Based Dialog System for Adaptive and Multimodal Interface: A Case Study
On the Monotone Matrices over Distributive Lattices
Research on the Micro-Crack Density of a Chromium Coating/Steel Substrate with and without Laser Pre-Quenching Treatment
Fracture Behavior of a Brittle Coating on an Elastic Substrate under Residual Stress
Delay-Probability-Distribution-Dependent Stability Analysis for Stochastic Neural Networks with Mixed Time-Varying Delays: The Discrete-Time Case
Effects of Wood Fiber Content on Structure and Properties of WF/PLA Bio-Composites
The Study between Passive Self-Adaptability and DOF of the Rover
Influence of Friction on Springback of Quadrangle Parts Bending
Microstructure Development and Properties of HSS-Based Self-Lubrication Composites
Research on the Capability and Application of Flame Retardant Cable
Bulk Metallic Glass Ti42Cu37.1Co4Zr8Sn2Ag2Be4.9 with High Glass Forming Ability and Ductility
Modelling Methods and Error Analysis of Deformable and Non-Deformable Real Particles
Preparation and Dielectric Properties of Polyimide Nanocomposite Films Based on Hollow Silica
Suitability Evaluation of Four Thermal Insulation Solutions in Hot Summer and Cold Winter Zone in China
Chapter 2: Computer Science and Material Science
Design of early Warning System of Agricultural Products in the Data Warehouse
Optimization Methods to Texture Synthesis
Exponential Stability for Uncertain Switched Neutral Systems with Nonlinear Perturbations
Effect of Heat Leading of Windward Leading Edge Using Heat Pipe with Porous
Effect of Carbon Addition on the Microstructure and Mechanical Properties of the In Situ Formed TiAl/Ti2AlC Composites
Reactive Synthesis of TiAl/Ti5Si3In Situ Composites
Tribological Behavior of Poly(ethylene Glycol)-Carbon Nanotubes
Effect of Melt Overheating History on the Microstructure of Ni-Base Single Crystal Superalloy
Preparation and Characterization of High-k Copper-Phthalocyanine/Polyimide Composites with Outstanding Thermal Stability
Data Analysis and Forecast for Aircraft Structure Impact Damage Based on GP Symbolic Fitting Method
Calculation Method of the Horizontal Displacement on the Multi-Grid Composite Wall-Shear Wall Structure
Research on the Formula of Vibration Period of Multi-Ribbed Composite Slab Structure
Mechanics Analysis of Beam-Like Space Deployable Truss Mast
A Study on Out-of-Plane Compressive Properties of Metal Honeycombs by Numerical Simulation
Epoxy Modified Polyurethanes Coated High Modulus Carbon Fiber: Synthesis and Properties Studies
Risk Assessment of Reinforced Concrete Structure Attacked by Chloride
The Effect of Water-Cement Ratio and Curing Age on the Strength of Recycled Concrete
Study on Technology of Filter Made by Engineering Grade Thermoplastic Polyurethane
Experimental Study on Mechanical Properties of Improved Multi-Grid Composite Wall
Further Research about Fast Extraction Method of Auditory Brainstem Response
Research on the Relationship between Temperature and Dimension of Large-Scale Forgings in Manufacturing Process
4-Substituted Benzoic Acids Functionalized Multi-Walled Carbon Nanotubes in Mild Polyphosphoric Acid/Phosphorous Pentoxide
Study on a New Formula for Rust Remover
Theoretical Study of an Axial Pumping Baffle Seal for Reactor Coolant Pumps
The Effects of Annealing Temperature on the Microstructure and Properties of Cold-Rolled 5083 Aluminum Alloy
Study on Properties of Artificial Cylindrical Ice
Fluid Hydrodynamics in a Single Inlet and Multi-Inlet Hollow Fiber Module
Research on the PVDF Hollow Fiber Gas Membrane Used for Bromine Extraction
Identifying the Sentiment in Domain-Independent Chinese Sentences
Study on Precipitation Behavior of High Strength Steel Plate Strengthened Complexly by Titanium and Molybdenum
Case Study on CDIO-Based Engineering Education Mode through College-Industry Linkages
A Design of Amplifying Circuit Based on Pt Resistance Strain Pressure Sensor
Chloride Penetration Capacity in NPP Structures Caused by Crack
The Optimal Application of GA-Improved Wavelet Network in Optical Fiber Sensor
Automatic Inspection and Classification for Casting of Tractors Chassis Based on Machine Vision Recognition Technology
Autoclaved Brick from Semi-Dry Desulfuration Ash
Mechanical Performance of a New Coir Fiber Laminated Composites
Non-Destructive Testing and Performance Analysis of Glass Fiber Reinforced Soybean Straw Particleboard
A New Approach in Testing and Evaluating Micro-Cracking Performance of Electroplated Diamond Film (EDF)
Flaking Failure in Silicon Nitride under Reciprocating Rolling Contact Fatigue
Effect of Frequency on Fatigue Cracks of Silicon Nitride Balls under Cyclic Loads
Research on Strength Calculation Model of 7A05 Aluminum Alloy Welding Heat-Affected Zone
Case-Based Reasoning Based on Good-Point-Set Genetic Algorithm and its Application
Effect of Sliding Speed on Wear Property of Al2O3-SiO2(sf) / AZ91D Composite
Optimizing of Deposition Speed of Electroless Nickel Plating Coating
Stability Analysis of Switched Systems with Mixed Delayed and Nonlinear Perturbations
Parameter Identification for the Dynamic Load Modeling Based on Denoising Method of the Measurement Data
First-Principles Investigation about the Plastic Property of Doping Ni in Ir Solid Solution System
Fuzzy Iterative Learning Control of Servo System
Stability, Electronic and Magnetic Properties of Ca3Ru2O7
Study on Electronic Structure and Optical Property of Silicon Doped with Transition Metal by First Principles
Effect of Ball Milling on Mechanical Properties of Graphite/Copper Matrix Composites
Thermal Stability of Graphite/Copper Nanocrystalline Composite Powders Prepared by High Energy Mechanical Milling
Numerical Simulation of Vertical Extrusion Process of Large-Sized Seamless Steel Tube with Thick Wall
Influence of Extrusion Ratio on Forming of Thick-Walled Tube
Influences of Strain Rate and Deformation Temperature on Flow Stress and Dynamic Recrystalliazation of Heat Resistant Steel P91
Relation between 3 Dimension Interface Topography and Residual Stress in Thermal Barrier Coatings
Effect of Trace Ni, Al and Cr on the Surface Film Structure of Sn-Pb Liquid Alloys
Longitudinal Interaction between Welded Turnout on Continuous-Slab-Track and Bridge
Influence of Cyclic Heat Treatment and Oxygen Content on the Rolling Contact Fatigue of JIS SUJ2 Bearings
Wear Resistance Improvement of Titanium Bearings by Laser Gas Nitriding
Secure Distributed Computation in the Exponent
The Effect of Interface Damage on Macroscopic Constitutive Behavior of Composite Materials
The Extraction Processes and Biological Characteristics of a New Generation Demineralized Bone Matrixes
Efficiency Measurement of Bionic Propulsion
Operational-Mission-Oriented Method for Equipment Support Resource Verification
Design on the Testing System of the Towing Tank
Prediction of Oilfield Cementing Quality Based on Levenberg-Marquardt BP Algorithm
Calibration of Pipe Friction Factor Based on Improved Genetic Algorithm
Suspended Load Prediction on Sucker Rod Suspension Load Based on Artificial Neural Network
Fastest Complete Vehicle Routing Problem Using Learning Multiple Ant Colony Algorithm
Effects of Plasma Nitriding and TiN Coating Duplex Treatment on Wear Resistance of Commercially Pure Titanium
Practices and Research on Goal Setting of Software Performance Engineering
Forward Displacement Analysis of a Parallel Manipulator
Study on Glass Transition Temperature of Polyvinylamine Hydrochloride
The Structure, Morphology and Catalytic Performance of a Silica Supported Cu Catalyst for Ethylene Glycol Synthesis
3ACare: A Wireless Body Sensor Network for Health Alert and Monitoring
Experimental Research on Thermal Mechanical Behavior of Recycled Aggregate Concrete from Earthquake-Stricken Area
Localization and Path Planning of Intelligent Wheelchair Based on Data Fusion
Dynamic Modeling of the Capture Process of Snare Space Grapple Device
Research on the Microstructure of Solid FeS by TEM
Structure and Tribological Behaviors of Synthetic MoS2 Film Prepared by a Novel Compound Method
A New Optimization Algorithm for Identification of Material Parameter
Preparation and Characterization of FeS Film by Low Temperature Ion Sulfurizing Technique
Research on the Tribological Property of Synthetic Multilayer MoS2/FeS Film under Dry Condition
Effects of Homogenization on Microstructures and Mechanical Properties of as Cast AZ91 Mg Alloy
The Preparation and Properties of Rice Straw/Starch Composites
The Effects of Bonded Retarder on Fatigue Crack Growth in 7085 Aluminium Alloy
Research on the Multimedia Order System in Catering Services
Design and Implement of Sharable Multi-Channel On-Chip Memory for Embedded CMP System
Experimental Investigation into the Buckling Behavior of an Advanced Grid Stiffened Plate by a Fringe Projection Profilometry System
Poly(aryl Imino Sulphone)s as Novel High Performance Polymers
Synthesis of a Low-Density Copper Oxide Monolithic Aerogel Using Inorganic Salt Precursor
Mechanical Properties of PVC/ABS Composite Material
Effect of Refining Slag on the Inclusions of Hard Wire Steel during Melting Process
Influence of Cold Working and Grain Size on Pitting Corrosion Resistance of Ferritic Stainless Steel
Simulation and Calculation to Segregation of High Nitrogen Steels Solidification Process Based on PROCAST Software
The Effect of Pressure and Pore-Forming Agent on the Mechanical Properties of Porous Titanium
Analysis on Steady Temperature of Honeycomb-Core Panel Based on Coupled Aerothermal Heating and Honeycomb Conduction
Characterization and Possibility of Coconut Filter Fibers as Reinforcement for Polymers
Study on the Compression Properties of Epoxy Matrix Composites Reinforced by PES Warp-Knitted Spacer Fabric
Controlled Hydrothermal Synthesis of ZnO Nano and Microstructure Materials with Photocatalytic Properties
OWL-Based Description for Agent
Influence of Mixing Time on Workability and Strength Properties of Concrete in Different Consistency
Preparation of Refractory Castable for High-Temperature Zone of the Alumina Kiln
Preparation and Properties of ZnTiNb2O8 Microwave Dielectric Cramics
Preparation of Bio-Degradable Polyurethane Foams from Liquefied Wheat Straw
Effect of Interface Improving on Morphology and Properties of Coir Fiber/LLDPE Bio-Composites
Damping Properties of Viscoelastic Stiffened Laminated Cylindrical Shells with an Unconstrained Fiber-Reinforced Layer
Effect of Anode-Cathode Spacing on Anodic Formation of Self-Organized TiO2 Nanotube Arrays
Influence of Radial Load on PEEK Plastic Bearings Life Cycle under Water Lubricated Conditions
Effect of Repeated Induction Heating on Fatigue Crack Propagation in SAE 52100 Bearing Steel
Effect of Finishing on the Structure and Filtration Property of PPS Filter
Temperature Effect on Microstructure and Mechanical Behavior of Ti-15V-3Cr-3Al-3Sn
The Effect of Notch Processing on Fracture of High-Carbon Steel (C70S6)
Developed Machine Learning Technology and its Application on Electric Power System
Intelligent Simulation Method and its Application on Risk Analysis
Localization of Partial Magnetization around Artificial Slits in Square Bars of Medium Carbon Low Alloy Steel JIS S45C
Structural Strength Evolution of Soil under Dynamic Load
The Higher Order Asymptotic Fields for Anti-Plane Oblique Crack with Physical Weak-Discontinuity
The Higher Order Asymptotic Fields for Plane Interfacial Crack with Physical Weak-Discontinuity
Chapter 3: Materials Engineering and Industry Application
The Crack-Tip Fields of Reissner’s Plates of Radial Functionally Graded Materials
Research on Automatic Monitoring System with Measurement Robot
ECG Application to Remote Care System via Web-Based and Graphics Interface
Powder Metallurgical Processing of Ti6Al4V Alloy
Intelligent Flexible Reform Technology of Logistic Unified Information System Based on Internet of Things
Logistic System Information Perception Model Building in the Environment of Internet of Things
Research on Information Security Evaluation of Internet of Things Electronic Commerce Based on AHP
Research on the Key Technology of Polynaphthalene Sulphonate Preparation
Research on EEG Identification Computing Based on Photo Images
Analysis of Powder Segregation in Powder Injection Molding
Experiment on the Bending Performance of Sea Sand Concrete Beam under the Artificial Climate Environment
Experiment on Bending Performance of Double Mixing HPC Concrete Beam under the Artificial Climate Environment
Subwavelength Plasmon Microcavity Based on the Indefinite Metamaterial Waveguide
Chinese Date Grading Based on Machine Vision
A Knowledge Simplification of a Uncertain System Based on Information Consistency
The Observation of Changes in the Magnetic Field due to the Crack Initiation under Different Stress Ratio Conditions
Effects of Moduli Differences on Layout Optimization of a Continuum with Multiple Materials
Calculation of the Stress Intensity Factors for Elliptical Cracks Embedded in a Weld under Tensile Loading I:Single Crack
Calculation of the Stress Intensity Factors for Elliptical Cracks Embedded in a Weld under Tensile Loading II:Double Cracks
Associated Interpretation of Sub-Bottom and Single-Channel Seismic Profiles from Shenhu Area in the North Slope of South China Sea - Characteristic of Gas Hydrate Sediment
Mechanical Modal and Numerical Simulation of Fracture Process of Block Wall
The Establish and Analysis of the Quenching Residual Stress’ Function of the Club-Shaped Metal
Thermokinetic Propertices of CTAB on Quartz Surface and its Effects on Surface
Burnt Microstructure and Properties of 7003 Aluminum Alloy
Hardness Prediction of 7003 Aluminum Alloy by Gradient Descent Algorithm in BP Artificial Neural Networks
Solid-Phase Synthesis and Photocatalytic Property of Cobalt-Doped TiO2 Mesoporous Materials
Simultaneous Determination of p-Nitrochlorobenzene and o-Nitrophenol in Mixture by Single-Sweep Oscillopolarography Based on Cascade Neural Network
Study of Space Big Aperture New Materials Mirror and its Technology
Air Compressor Plate Drum’s Reliability Analysis
Modal Analysis of Shaft Coupling
Effect of Electromagnetic Field on the Solidification Structure of Copper-Iron Alloys
Modification of Bisphenol A Dicyanate Ester Resin with Poly Vinyl Pyrrolidone (K30)
Shear Behavior of Interior Joints with Different Depth Beams in RC Frame Structures
Thermal-Structure Coupling Numerical Simulation of a Special-Type Plug Nozzle
Tobacco Pest Monitoring Feasibility Analysis Based on RS
DYNA Numerical Experiment on Long-Term Stability of Strip Pillar in Deep Mine
Experimental Study on Melting Characteristics of Spherical Capsule Packed Bed Latent Heat Storage Material System
Analysis on Thermal Fatigue Fracture on Engine Exhaust Manifold Based on ANSYS
Wireless Granary Temperature and Humidity Monitoring System
Effect of Press on Thermal Contact Resistance
Study on Anti-Seismic Performance of Steel Storage Shelves
The Fabrication of Highly Ordered TiO2 Nanotube Arrays and their Application in Dye-Sensitized Solar Cells
How to Protect Brand Equity in Product Harm Crisis by Appropriate Response?
A Improved Chan Algorithm Basing on Particle Filtering in NLOS Environment
Synthesis of Porous Molybdenum Disulfide Materials with High Specific Surface Area Using Sodium Chloride as the Template
Electrochemical Impedance Spectroscopy Study of the Effect of Curing on Property of Vinyltriethoxysilane Films on Carbon Steel Surfaces
The Relationship Analysis of Surrounding Rock Stability and Continental Sedimentary Environment
Crush Behavior of Corrugated Cores Sandwich Panels
Study on Key Technique of Reconfigurable CNC System
Study on Simulation Signals of Blasting Seismic Waves Based on Technology of Wavelet Analysis
Compatibility of Polyethersulfone/Polycarbonate Blends
Properties of Random PSF/PES Copolymers as High-Performance Polymers
Preliminary Investigation of Polyethersulfone/MCM-22,49,56 ‘Family’ Zeolites Composite
Structural Optimization of an Inertially Stabilized Platform for Aerial Remote Sensing Systems
Pseudo-Potential Calculations of Structural, Elastic and Thermal Properties of Si3N4
Reasons and Prevention Measures of Crack at the Bottom of the Extruded Magnesium Alloy Tube
Research of Microstructure and Property of Laser Alloying on the Surface of P20 Steel Compared with Nitriding
Technical Parameters Model of Laser Direct Metal Deposition
Research on Fully Mechanized Coal Face Hydraulic Support Selection Based on the Testing Principle of Floor Specific Pressure
Pressure Regularity Study of Three Soft Complex Coal Caving Coal Face
Prediction of Coal Production Based on BP Neural Network
The Electronic Structures and Magnetic Properties of Co(endi)2(N3)2
Numerical Analysis about Flexural Strengthening Reinforced Concrete Beams by Bolting Steel Plates
Detection and Linking Algorithm Based on Improved Snake Model for Pores with Weak Contour
Strength Prediction and Test of FRP Composite Laminates with Central Hole
Synthesis, Characterization and Oxidation Behavior of a Novel Curable Liquid Polysilane Precursors for C/C-SiC Composite
Microstructure Characterization of Hot Extruded 7075 Al Bar with Different Passes and Temperatures
Effects of Technological Parameters on the Tensile Properties of GF/PET Hybrid Thermoplastic Composite
Size-Dependence of Effective Anisotropy and Coercivity in Nanocomposite Permanent Magnetic Materials
Pulse-Laser-Crystallization of Amorphous Nd3.7Pr3.4Dy0.9Fe86B5Nb1
Transmission Properties of the Symmetrical Structure of One-Dimensional Photonic Crystal Quantum Well
Preparation and Characterization of Magnetic Toner Particles by Direct Polymerization Method
Structure, Optical, Temperature Dependent Electrical Properties of P-Type Conduction in N–Al Codoped Zn1-XMgXO Films by Ultrasonic Spray Pyrolysis
Study on Preparation and Application of High-Performance Cu-Al Composite Row
Research on Mine Pressure Behave Law in Mining of Face under the Coal Pillar
Design and Impelemation of Two Switchable Chaotic Systems
Hot Deformation Behavior of 7075 Aluminum Alloy Bar Compressed with Different Orientation at Elevated Temperature
Effects of RE and Sb on Microstructure of Mg3Al Based Magnesium Alloy
Simulation of Numerical Test of Concrete Mechanical Properties Base on Numerical Manifold Method
Deposition of TiO2 Thin Films Using Magnetron Sputtering
Preparation of Dense Ultrafine TiAl Alloys by Spark Plasma Synthesis from Mechanically Activated Powders
Feature Selection Based on GA and PNN
Analyze on the Mechanical Properties of Stitched Composites
Study on the Analysis of Crack Causes and Control Measures of Prestressed Concrete Cylinder Pipe
Research of Correlation Tracking Algorithm Based on the Function of the Minimum Average Absolute Difference
Delaunay Graph Based Path Planning of Dynamic Obstacle Avoidance Method for Mobile
Optimization Design of CTP Imaging Drum Based on ANSYS
Cost Estimation of Post-Earthquake Rehabilitation of Industries Based on BP Neural Network
An Amperometric Immunosensor Based on a Polyelectrolyte/Nano Gold Particle Layer-by-Layer Assembly Modified Electrode for the Determination of Clenbuterol in Meat
The Design of High-Precision Capacitance Micro-Displacement Sensor
The Design of Remote Monitoring and Diagnosis System Based on Virtual Instrument
Research on the Buffer Zones of Cultural Heritages with the Theory of Soliton
Dynamic Compressive Behavior of Concrete at High Temperatures
A Study on the Nail-Plate Connection Performance of Light Wood-Frame Structure
Modeling and Simulation of Single-Phase Full Bridge Two-Level PV H6 Inverter Connected to Grid
Preliminary Studies on Luoyang Leisure Sports
Early Warning of the Financial Risk on the Power Industry
The Motive Mechanism of the Development of Competitive Sports by Synergetic View
Thinking on the College English Curriculum (2004) and the Multimedia-Aided Teaching in College English
An Innovation Ability Characterization Study on a High-Level Professional Tennis Coach in China
Research on the Strategy for Regional Tourism Cooperation in Hubei Province
The Current Situation and Countermeasures of Online References Recording about Sports Core Academic Journals
The Experimental Study on College Psychical Education Professional Men Load Combination Methods of Fast Strength
The Practical and Innovative Research of College Taiji Softball
A Study of Comprehensive Testing of Moving Ability of Volleyball Players and Modular Training
A Research on Coping Styles of College PE Majors
The Aesthetic Appreciation of the Epochal and National Character of Competitive Martial Art Routines
Research on Communication of New Media Mobile in China
Research on the Courses Setting of Undergraduate Physical Education in China
Research on the Principals’ Participating in Physical Education Curriculum Implementation
