Sonstiges, Englisch, Band Volume 750, 358 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Materials Science Forum
Sonstiges, Englisch, Band Volume 750, 358 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Materials Science Forum
ISBN: 978-3-03795-385-3
Verlag: Trans Tech Publications
The 8th International Forum on Advanced Materials Science and Technology (IFAMST-8), was held in Fukuoka Institute of Technology, Fukuoka City, Japan, August 1-4, 2012. The forum attracted about 200 attendees from 10 different countries. The proceedings include 79 peer reviewed papers covering a wide range of up-to-date materials science topics.
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Synthesis of MAX Phase (Cr,V)2AlC Thin FilmsStudy on Preparation Process of Magnetic Abrasive ParticlesFatigue Fracture of Clay Reinforced Nylon NanocompositesCrack Healing Behavior of SiC Whisker Reinforced Si3N4 CompositeEffect of Chemical Composition on Fracture Behavior in ZrNiAl Metal GlassEffect of Minor Addition Ta on the Thermal Stability and Corrosion Resistance of Ti-Zr-Cu-Pd Bulk Metallic GlassesResidual Stress in Oxide on NiCrAlY Coating Evaluated by Photoluminescence SpectroscopePreparation of Ni-P-Al2O3 Composite Film on Mild Steel with High Resistance to Corrosion and WearEffects of Minor Si Addition on Glass Formation and Thermal Stability of Ni Free Ti-Based Bulk Metallic GlassInfluence of Carbon Reinforcements on the Mechanical Properties of Ti Composites via Powder Metallurgy and Hot ExtrusionEffect of Nanosized Particles on the Mechanical Properties of Y2O3Three-Dimensional Characterization of BaZrO3 Precipitates in Y1-xGdxBa2Cu3O7-y Prepared by TFA-MOD Using STEM-TomographyTi-Based Bulk Metallic Glass Composites Produced by Spark Plasma SinteringFabrication of Cu Nanowires and its Effect on Proliferation of Mesenchymal Stem CellsElectrochemical Behavior of AZ Magnesium Alloy Containing Rare Earth ElementRoll-Gap Control System of Twin Roll Strip Caster Based on Feed Forward-FeedbackImprovement of Catalytic Activity of Atomized Ni3Al Powder for Methanol Decomposition by Surface Chemical TreatmentsNanoporous Copper Dealloyed from a Nanocrystallized Ticu AlloyCombined Experimental and Numerical Approach for Linking Microstructure and Mechanical Properties on Different Length Scales for near ??TiAl AlloysDevelopment of ZnTe-Based Solar CellsPeroxidase and Toluidine Blue-Incorporated DNA Bio-Polyion Complex Film as Biosensing Layer for Hydrogen Peroxide DeterminationDynamic Strain Ageing in a Twin-Induced Plasticity Steel
In Situ Synthesis of Alumina Matrix Composites by Spark Plasma SinteringTemperature Field Analysis of Directional Solidification of Multi-Crystalline SiliconRheological Model for a Nanoporous-Elasto-Hydrodynamic Composite MaterialInfluence of Glass Coating Thickness on Interfacial Heat Transfer Coefficient during Forming of Nickel Based SuperalloysShear Strength Evaluation of Laminated Binderless Bamboo CompositesEffect of Crack Initiation Size on Fatigue Strength in 0.85% Carbon SteelApplication of Magnetic Field Method for Measuring Lubricant ViscosityFabrication of Photo-Polymerized PCL Tissue Engineering Scaffolds by Dynamic Masking Rapid Prototyping SystemFEM Analysis on Thermoelectric Properties of Metal/TiO2?x Composites with Random Distribution of Metal PowderImprovement of Thermoelectric Properties of CuAlO2 by Excess Oxygen Doping in AnnealingInfluence of Intermittent Air Introduction on Formation of Zn Films by Mechanical Coating TechniqueDetection of Delamination in GFRP and CFRP by Microwaves with Focusing Mirror SensorComparison of Mechanical Properties of a Biomedical ? Titanium Alloy Added with Pure Rare Earth and Rare Earth OxidesMapping of Phase Distribution in Electron Holography with a Stage-Scanning SystemModeling and Simulation of Dynamic Recrystallization of GCr15 Steel Using Cellular Automaton MethodInvestigation of Bonding Interface and Strength Properties in Diffusion Bonding of MgAZ31/Al6061Analysis of Bonging Temperature and Interfacial Characterization of 3Y-TZP and SUS304 by Diffusion BondingThe Effect of H3BO3 Microaddition on Microstructure of Ni/MgO Sintered Compact by Co-Precipitation MethodA Study on the Rust Removal and Retard on the Surface of the Wear Water Screw-Thread Steel Using Flame Hot MeltingMicrostructure Evolution of AZ31 Magnesium Alloy in Rolling ZoneStudy on the Application of Magnetic Nanoparticles as Drug Delivery Particles on the Atopic DermatitisA Pseudo-Binary Diagram of the (Bi,Pb)-Sr-Ca-Cu-O SystemSynthesis of Spherical Carbon Nanoparticles via Sol-Gel and their Electrochemical Properties in Electrical Double Layer CapacitorEffect of Mean Stress on Fatigue Strength of Spheroidal Graphite Cast IronStudy on Anisotropic Mechanical Behavior at near Pre-Crack for AZ31B Sheet under Biaxial StressA Study on Spatial Resolution of the Microwave Atomic Force Microscope Imaging Affected by Scanning SpeedThermal Residual Stress and Tensile Strength of UACS/Al Laminate with Different Slit AnglesEffects of Slit Patterns on the Tensile Properties of Unidirectionally Arrayed Chopped Strands CompositesEffect of Substrate on Crystallization of Sol-Gel-Derived Pb(Zr0.52Ti0.48)O3 Thin Films by Microwave AnnealingStructure Simulation Calculation of Impurities B with Fe, Al or Ca in Metallurgical Grade SiliconEffect of Microwave Irradiation on Rapid Crystallization of Ferroelectric Lead Zirconate Titanate Thin FilmsPreparation of Paver Bricks Having both Water Retainability and Frost Resistance by Designing Macro Porous StructureOptimization of Process Parameters for Unidirectional Solidification of Magnesium AlloyNotch Effects in High Cycle Fatigue of Ti-6Al-4VInvestigation for Small Shear-Mode Fatigue Cracks in Bearing SteelsPurification of Silicon Using the Liquid Phase Migration Technique under Temperature GradientFormation of Nanocrystalline Si by Au-Catalyzed CH3SiH3 Pulse Jet CVDPhoto-Electrochemical Properties of Titanium Dioxide Thin Films Prepared by Reactive RF Sputtering MethodNanopore Formation on SOI(100) by CH3SiH3 Pulse Jet CVD: SiC Growth Temperature DependenceEstimation for Fatigue Behavior of Notched Plate with Mean Stress EffectHydrogen-Induced Ductility Loss in Cast IronsEffect of Occasional Shear Loading on Fatigue Crack Growth in 7075 Aluminum AlloyEffect of Dry-Ice Blasting on the Microstructure and Properties of Plasma-Sprayed CoNiCrAlY CoatingMorphology and Residual Stress of Ultrathin Al Films Confined by AlN LayersA High Sensitivity 3-D Measurement Method of Minute Specimen Based on Microscope and Laser ProjectionReductive Removal of Phosphorus in Silicon Using CaO-CaF2 SlagCritical Current Characteristics and Flux Pinning in Fe-Based Pnictide SuperconductorCritical Current Density and Flux Pinning Properties in Superconducting MgB2 with and without SiC DopingStructure and Electrochemical Properties of DLC/SiC Films on the Surface of Magnesium Alloy by Plasma Immersion Ion DepositionThe Effect of Working Pressure on the Composition and Optical Properties of TiO2 Films Bombarded by N Ion BeamsGlass-Forming Ability and Mechanical Properties of Zr-Ni-Al Bulk Metallic Glasses with High Zr ContentThe Effect of Pt Addition on the Structure and Magnetic Properties of Melt-Spun Fe80?xPtxB20AlloysEffect of Withdrawal Rate on Defects of Upgraded Metallurgical Grade (UMG)-Silicon Prepared by Vacuum Directional SolidificationThe Research of Bubble Adsorption to Purify Silicon in the Al-Si SystemA Developing Method to Prepare Micro-Nanopowder by Incorporating Jet Milling and Electrostatic DispersionEffects of Lanthanide Substitution on the Sintering Behavior of Bismuth Titanate Ceramics Prepared by the Chemical Coprecipitation MethodDevelopment of Silicon Nitride Porous Bodies with Micro-Macro Complex Pore Structure for the Application of the ?Bio-Filter?
