Sonstiges, Englisch, Band Volume 1088, 894 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Advanced Materials Research
Sonstiges, Englisch, Band Volume 1088, 894 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Advanced Materials Research
ISBN: 978-3-03859-105-4
Verlag: Trans Tech Publications
The 167 papers are grouped as follows:
Chapter 1: Nanomaterials and Nanotechnologies;
Chapter 2: Thin Films;
Chapter 3: Metal-Based Materials, Alloys and Metallurgical Technology;
Chapter 4: Crystallography, Chemical and Cathode Materials;
Chapter 5: Polymers and Composite Materials;
Chapter 6: Biomaterials and Biotechnologies;
Chapter 7: Materials and Technologies in Environmental Engineering;
Chapter 8: Building Materials and Technologies;
Chapter 9: Research in Area of Applied Materials;
Chapter 10: Processing Technologies and Computational Methods in Area of Materials Science
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Application of the Nanostructured Carbon Coatings for Improvement of Functional Properties of Medical PolyurethanesThe Dispersion of MWCNTS in Acetone Solution of SANRemoval of Paraquat from Aqueous Solutions Using Multi-Walled Carbon Nanotubes: Kinetic, Isotherm and Thermodynamic StudiesEffect of Nanostructured Oxide Coatings on Tensile Properties of Cast Pure MagnesiumMultifunctional NaYF4:Yb3+, Er3+@Au Nanocomposites: Upconversion Luminescence, Temperature Sensing and Photothermal TherapyComparative Studies for the PAMAM/RE and HPAE/RE (RE=La, Nd, and Eu) Based on Molecular Dynamics SimulationsFacile Synthesis and Photocatalytic Properities of Mini Nanoparticle CdS Quantum Dots/Boron and Nitrogen Co-Doped TiO2 Transparent Photocatalyst EmulsionNanomagnetic Particle Anchored to Monodispers Porous Microspheres for Pectinase ImmobilizationEffect of Noble Metal Nanoparticles in SERRS Measurements of Water-Soluble Porphyrins
In Situ TEM Manipulation and Property Study of Cd2Ge2O3 NanowiresStructures and Performances of PA6/PVA Nanofibers Membranes from ElectrospinningA Simple Solvothermal Synthesis of Spherical Y2O3:Eu3+Antibacterial Potential of Silver Nanoparticles Capped with Poly(4-styrenesulfonic acid-co-maleic acid) PolymerSynthesis, Characterization and Thermal Properties of SiO2/Pi Composite FilmFabrication and Characterization of Al/Ni Multilayer FilmsSiO2ZrO2 Thin Films as Low Temperature NO2 and O3 SensorsPreparation and Characterization of Cd1-xZnxS Thin Films with Chemical Bath DepositionSynthesis and Characterization of Au-CdS Composite Thin Films for Photoelectrochemical Sensing of Hg2+ IonsHighly Transparent Flexible Clay Film with Organized PolymerStudy on Preparation and Surface Properties of Fluorinated Acrylate Hydrophobic Polymer FilmEffect of Thermal Annealing on La2O3 Films Grown by Plasma Enhanced Atomic Layer DepositionEffect of Oxygen Content in Powders on Microstructure and Mechanical Properties of WC-FeAl Composites Fabricated by Vacuum Sintering TechniqueInfluence of Chlorine Additives on Combustion Rate of Pulverized Coal InjectionFriction Stir Processing of Cast Iron Using Cermet ToolWelding-Brazing Characteristic in Electron Beam Joining Vanadium Alloy and Stainless SteelImprovement of Wet Milled TiC-Feal AlloysApplication of Orthogonal Experiments Design to Optimize Process Parameters in the Alloy Heat TreatmentStudy on Clinching for Similar and Dissimilar Titanium AlloyThe Effect of Enhanced Solution Treatment on Microstructures and Properties of 6013 Type Aluminum AlloyHeat Transfer and Solidification Model of Slab Continuous Casting Based on Nail-Shooting ExperimentsThe Influence of Calcium Additive in the Structural Formation of Tungsten via Reduction ReactionHigh-Temperature Corrosion of Carbon Steel in Air, Ar/0.2%SO2, and N2/0.4%H2S GasesEnvironmental Effects on Electrochemical Behaviors of Materials of a Dissimilar Metal Weld Exposed to High Temperature Primary Water of PWR Nuclear Power PlantsResearch on Microstructure and Properties in Welded Joint of 700 MPa Grade Low Carbon Micro-Alloy SteelTensile Properties of Squeeze Cast Mg-Al-Sr Alloy under Applied PressuresHot Deformation Behavior of Q235 Steel during Isothermal Compression at Elevated TemperatureEffect of Holding Time on Microstructures of AZ91D Alloy by the Semi-Solid Thixo-Extruded ProcessXRD, STEM, and Tensile Properties of AISI S1 Tool Steel after Deep Cryogenic TreatmentResearch on the Morphological of Lead and Zinc in the Smelting SlagCold Crystallization Behaviour of a Commercial Zr44-Ti11-Cu10-Ni10-Be25 Metal Glassy AlloyLab Scale Synthesis of Al-Sc Alloys in NaF-AlF3-Al2O3-Sc2O3 MeltThe Microstructure Evolution of a Nickel-Base Single Crystal Superalloy after Long-Term AgingMicrostructure and Mechanical Properties of As-Cast and As-Extruded Mg-Gd-Er-Zn-Zr AlloyThe Compressive Behaviors of the Mg-Zn-Er Alloy Containing I-PhaseGrain Refinement of High-Iron Aluminum Alloy by Inoculation with Al-B Master AlloyInterfacial Energy Anisotropy Affecting Dendrite Growth of Magnesium AlloyA New Al-ZnS Master Alloy Designed for Modifying Hypereutectic Al-Si Alloy and its Refinement Performance on Primary SiCreation of Submicroporous and Nanoporous Structures in Metallic Materials by Laser Thermocycling as Eutectic Is ReachedElectrolytic Aluminizing of Low-Carbon Steel in NaF-KF-AlF3 MeltFracture Toughness and Hardness of Ti(C0.7N0.3)-19Mo2C-xNbC-24NiInfluence of Solid-Liquid Composite Casting on Interface and Microstructure of High Chromium Cast IronThe Effect of Forming Speed on the Formability of a Zr-Based Bulk Metallic GlassDevelopment and Application of Manganese Cobalt Lithium Compounds in the Field of Lithium BatteriesBi-(2, 4-dihydro-2H-3-(4-N-maleimido) phenyl-1,3-benzoxazine) Isopropane: Molecular Structure, Optical Spectrum and Thermodynamic PropertiesPreparation of HA Hydrogel by Click ChemistrySynthesis and Properties of Functionalized Sulfur-Containing Hexa-Peri-HexabenzocoroneneMorphology of Cobalt Oxalate Powders Prepared with Pulsed Electromagnetic FieldSynthesis of Spherical and Fine Cobalt Powders from Cobalt OxalateSynthesis, Crystal Structure and Characterizations of a Novel Open-Framework Lanthanide ImidazoledicarboxylateHydrothermal Synthesis and Structure Characterization of Two Hybrid Metal Phosphonates MaterialsHexacarboxylate-Bridged Dicopper (II) Paddle-Wheel-Based 3-D Metal-Organic Framework: Synthesis, StructureStudy on Pyrolysis Behavior of Polybenzoxazine by PyGC-MSSubstituent Group Effete on the Geometric Configurations of the Acyclic Ruthenium Bipyridine Imidazole-Cyanide Anion Recognition SystemsCo-Effect of AlF3 and MgF2 Coating on the Electrochemical Performance of LiNi1/3Co1/3Mn1/3O2 Cathode Material under High VoltageNovel Sorbents and their Sorptive Properties for Mercury Emissions Control of Coal-Fired Flue GasV10O28-6 Cluster Compound, a Promising Cathode Material for Li Ion BatteryThermal Oxidative Degradation Behavior of Fluorinated Thermotropic Liquid Crystal CopolyestersStudies of Reaction Kinetics of Catalytic Hydrogenation of Isophthalonitrile for Meta-Xylenediamine PreparationOptimization of the Coagulation Process for Kaolin and Humic Acid Removal Using Polymeric Aluminum Ferric SulfateMono-Component-Solution Controlled Growth of Microarc Oxidation Coatings on Aluminum SubstratesSimple, Efficient, and Selective Synthesis of Phthaloylserine and PhthaloylthreonineSolvent-Free Green Synthesis of 4-amino-5-substituted-1,2,4-triazole-3-thione by GrindingStudy on Different Synthesis Methods of Spherical YAG:Ce3+ Phosphor and its Luminescence PropertiesCe-Doped ZnO Based Fast Response UV Photoconductive DetectorSurfactant-Based Fluorescent Quantum Carbon Dots: Synthesis and ApplicationThe Interactions with Proton-Donor Solvents and Stability of some BorondipyrrinatesReceiving and Research of Diamond-Like PVD-CoatingQuality Technological Properties of Foundry Exhaust Dust as Alternative Ceramic Coating Raw MaterialsInvestigation of the Elastic Modulus Effect on Free Vibration Characteristics of Fiber Reinforced Polymer Composite Beams Made of Various Fundamental ShapesEvaluation of a Plastic Composite Produced with Residues of Sugarcane Bagasse and Polypropylene without AdditivesInfluence of Portland Cement Addition in the Physical and Mechanical Properties of Epoxy ResinResin-Wood Particulate Composite Reinforced with Piassava FibreStructure and Properties of Melamine Formaldehyde/Polyvinyl Alcohol (MF-PVA) Composite Fiber by ElectrospinningStudy on Melamine Formaldehyde/Polyvinyl Alcohol Blend Fiber by ElectrospinningSilicon Electrodeposition on Glassy Carbon, Silver, and Tungsten SubstratesSynthesis of Polypropylene Strong Acid Cationic Exchange FiberStudy on the Phenolic - Epoxy Resin SystemThe Performance Study of Waterborne Damping CoatingPreparation and Characterization of Modified Polylactic Acid-co-Polyethylene Glycol-co-Polylactic Acid Microcapsules Enclosing CypermethrinStudy on Environmental-Friendly Waterborne Polyurethane Flame-Retardant Coating Polyester FabricStudy on the Modification of Waterborne Polyurethane by Tung Oil Anhydride-Ester PolyolModification of Unsaturated Polyester Resin by Methyl-a-Eleostearate-Maleic Anhydride AdductHyperbranched Triazine Compounds Grafted Carbon Nanotubes for Improved Tribological Performance of Bismaleimides CompositesEffect of Nanocrystallized Hydroxyapatite Coating on Bone Healing Evaluated by Synchrotron Radiation DiffractionNew Biomimetic Hybrid Nanocomposites for early Fixation ProsthesesSynthesis and Photophysical Property of Polyion Complex Micelle Incorporating Phthalocyanine Zinc(II) Bearing Benzyl Ether Dendritic Substituents with Nitro-Terminal GroupThe Study of the Effect of Concentrated Growth Factors (CGF) on the New Bone Regeneration of Immediate ImplantFermentation Production of Succinic Acid from Sucrose by Engineered Escherichia Coli JH208Synthetic Small Molecules Targeting G-Quadruplexes and their ApplicationEffect of Bone Composition on the Fracture Toughness of Cortical BoneColor Stability of Heat-Cured Denture Base ResinsFormulation and Technology Study on the Taste Masking GranulesAdsorption of 2,4-Dichlorophenol and Rhodamine-B from Aqueous Solutions onto Activated Carbon Derived from Phragmites AustralisHydrothermally Synthesized Magnetically Separable RGO Supported Nanocomposite for Water PurificationResearching on a New Grouting Material and its Engineering ApplicationStudy of Combustion of Different Biomass and its Atmospheric EmissionsApproaching Capacitive Deionization (CDI) on Desalination of Water and Wastewater - New Progress and its PotentialThe Evaluation of the Concentration of Benzo[a]Pyrene in the Air of Moravian-Silesian Region (Czech Republic) during Winter and Summer SeasonsCu-Supported on Sodium-Treated Sepiolite for Selective Catalytic Reduction of?NO by PropyleneAdvances in Wastewater Treatment of Waste Metal Cutting FluidSpeciation Analysis of Antimony and Arsenic in Soil and Remediation of Antimony and Arsenic in Contaminated SoilsSelected Physical and Mechanical Properties of 2-Ply Bamboo Laminated Lumber with Modified Phenol FormaldehydeThe Influence of Different Carbon Sources for Polyhydroxyalkanoates StorageAn Experimental Study on Ammonia-Nitrogen Removal from Waste Water with Modified AbsorbentEvaluation of the Tensile Modulus of Elasticity in Parallel Direction to the Grain for Eucalyptus grandis Wood SpecieExperimental Research on Alkaline Residue Concrete Dry Shrinkage PerformanceInfluence of Fly Ash on Microstructure of Complex Binder PastesExperimental Study on Effects of Mechanical Properties of Lytag ConcreteApply for RC Beams and Slabs Strengthened with New Inorganic Adhesives Sticked FRP SheetsBasic Mechanical Properties Research of SAE Latex-Modified MortarThe Research of the River Silt as Road Subgrade Filling Materials in Big CityAnatomical Description of Guanandi Wood, from Pure Plantation, and its Use as Building MaterialInfluence of Time Evolution in the Modulus of Elasticity of Concrete Reinforced by Carbon FibersParticleboard Manufactured with Variation of Press TimeInfluence of the Addition of Coffee Husk in Physical Properties of Bamboo ParticleboardPhysical and Mechanical Characteristic of Particleboards Produced with Residues of Sugarcane and Stem Leaves of Bamboo Bonded with Castor Oil AdhesiveCharacterization of Medium Density Particleborads Using Agricultural ResiduesPost-Fire Study of Strength and Stiffness of a Wooden Roof StructureEffect of Drying Methods in the Resistance Strength Compression Parallel Test for BambooInfluence of the Number of Load Cycles to Obtain the Stiffness Properties of Angico Preto (Anadenanthera macrocarpa) Wood SpecieParticleboard Manufactured with Bamboo and Coconut Fibers in Different Ratios of AdhesiveEvaluation of the Moisture Content in Stiffness Properties of Structural Glulam BeamsMoisture Content and its Influence on the Roughness and Noise Emission during Wood MachiningMDP Panels Manufactured with Hevea Brasiliensis Overlaid with Bamboo Foil of Phyllostachys EdulisPoisson?s Ratios for Wood Species for Structural PurposesAnalysis on Causes of Corrosion in the Sleeve Joint of Certain Offshore Pipeline SystemIon Plating Plasma Assisted SiO2 and TiO2 Protective Nano-Coatings for Antique Ceramics PreservationStudy on Influence to the Ceramic Glaze Color of Environmental-Friendly Pottery Brick by Low-Carbon Catalytic Combustion Furnace of Natural GasInfluence of CrCN Coatings Steel Ball Deposited by Closed Field Unbalanced Magnetron Sputtering on the Performance of BearingStructural Optimization of Laminated Glass Plate Using Discrete Element MethodStudy on Carbocoal as Microwave Absorber in Microwave FieldEffects of Extrusion Speed on the Deformation of Copper Using ECAP Based on FEMResearch on Performance of Drilling Carbon Fiber Reinforced Plastics with Diamond Coated Special DrillThermal Simulation Study on Copper Cooling Stave of Blast FurnaceThe Process Optimization of Cast Copper Stave Based on ProCASTEffect of Surface Roughness on the Shear and Tensile Strength of Hardwood Adhesive Joints: A Linear Elastic ModelShear Stress Discontinuities in Adhesive JointsComparisons of Linear and Nonlinear FEA of Adhesively Bonded BeamsEffect of Adhesive Behavior on Normal Stress Distributions in the Single-Lap Adhesive JointsResearch Concerning the Influence of Contact Tip-to-Work Distance (CTWD) on Penetration, Bead Height, Bead Width - Study Case GMAW CladdingExperimental Study on the Surface Cutting Mechanical Properties of Single Crystal Silicon in Micro-Nano ScaleEffect of Parapet Hole on Tundish Flow FieldEffect of Turbulence Inhibitor on the Molten Steel Flow in TundishEnergy Saving for Distillation Process of Mixture with Wide-Boiling Range via T-Q GraphThe Influence of the Welding Current Polarity on the Geometric Configuration of the BeadSimulation of Drying Heveabrasiliensis WoodThe Influence of Welding Parameters on Heat Transfer Efficiency of Hybrid Pulsed Nd: YAG/GTAW WeldingUsing Methods of Multi Scale Modeling for Investigation of Sample DefectsA Study on Image Processing Algorithms for Seam Tracking System in GMA WeldingA Study on Modified Hough Algorithm for Image Processing in Weld Seam Tracking SystemAffect of Casing Eccentricity on Stress at the Cement Ring InterfaceSimulation of Temperature Field in the Solidification Process of CastAnalysis of Sectional Girder Flexion Calculate of Tapered Canal Bi-MaterialStudy on the Promotion Effect of Microwave-Metal Discharge on the Microwave Pyrolysis of Electronic WasteNonlinear Dynamic Finite Element Programming Design of Different Material ModelDeformation Behavior Analysis of Harmonic Structure Materials by Multi-Scale Finite Element AnalysisFinite Element Analysis of Anchorage Structure for FRP Tendon
