Buch, Englisch, 1558 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 2980 g
ISBN: 978-3-03835-514-4
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preface, Program Committee and Sponsors
Chapter 1: Films, Ceramics and Glasses
Micromechanical Properties of Glass-Filled Polyamide 6
Effect of Sintering Temperature on Phase Formation and Dielectric Properties of PLZT-BT Ceramics
Research on Mechanical Characteristic of Micro-Nano Structure TaC Ceramic by Nanoindentation
Initial Growth Mechanism of Atomic Layer Deposited Hafnium Dioxide Using Cyclopentadienyl-Type Precursor: A Density Functional Theory Study
Effects of Al(OH)3 on the Structure and Properties of Foam Ceramics Cemented by Phosphate
Micro-Drilling of Pre-Sintered Alumina Ceramic
Influences of Pre-Sintered Ceramic Compacts Processing Parameters on Tool Wear
Effect of Titanium Dioxide Manufacturing Waste in Mechanical Properties of Red Ceramics
Compositional Dependence of Residual and Interfacial Stresses in Thin Film Systems with Substantial Thermal Mismatch Characteristics
Preliminary Structure Characterization of UV Curing Paint Film
Novel Ordered Layered Double Hydroxides Ultra Thin Films Functionalized with Dawson-Type Polyoxometalates: Synthesis, Characterization and Photocatalytic Behavior under Visible Light
Effect of the Iron Ion Doping in LaCoO3 Perovskite, Both in Powders and in Sintered Samples Obtained from Combustion Reaction and Solid State Route
Improving the Surface Wettability of Parylene C Film by Hyperthermal Hydrogen Induced Cross-Linking Technology
Effect of Cooling Rate, Tungsten Fiber Addition and Annealing on Deformation and Mechanical Properties of Zr-Based Bulk Metallic Glasses Under a Nanoindenter
Effect of Ce Substitution on Mechanical and Thermal Properties of Tetragonal YSZ: First-Principles Calculations
Effect of Sc, Y, Yb, Hf, Ce on Mechanical and Thermal Properties of La2Zr2O7: First-Principles Calculations
Piezoelectric and Ferroelectric Properties of KNN-LS-BF1-xCx Ceramics
Investigation of Preparation and Thermoelectric Properties of Ca2.5La0.5Co4O9 Porous Ceramics
Chapter 2: Electrochemistry, Chemical Materials and Technologies
Study of Leaching Zinc from Difficult Dealt Zinc Oxide Ore with High Silicon in the Alkali
Synthesis and Salt Resistance of Novel Polyampholyte P(DMAPMA-co-HEA)-CA
Electrochemical Properties of Chemically Etched-NbO2 as a Negative Electrode Material for Lithium Ion Batteries
A Preliminary Study on Li4Ti5O12 as a Novel Electrode Material for Calcium Ion Batteries
Effects of Preparation Conditions on Alkali-Activation Reactivity of Chemosynthetic Al2O3-2SiO2 Powders
Study of Circulation of Reaction Liquid in Liquid Phase Synthesis of LiFePO4 as Cathode Material
Synthesis of Li2Fe0.5Mn0.5SiO4/C as Cathode Material for Lithium-Ion Batteries Using Amorphous Li2SiO3
Study on Using Chenghe Fly Ash to Prepare 4A Molecular Sieve
Preparation of CMC-PVA/PAN-FePc(COOH)8/CS-PVA Bipolar Membrane and its Application in Electro-Oxidized Synthesis of Dialdehydle Starch
Lightweight Foams with Open-Cell Structure Prepared by Pickering High Internal Phase Emulsions
Synthesis of and Characterization of Polyhedron of Mn2O3 Nanoparticles Using Spent Zn-Mn Batteries
The Stability Study on Vanadium Dioxide
Supramolecular Complex Formed by Fumaric Acid and Piperazine: Crystal Structure, and Synthon Cooperation
Hydrothermal Synthesis and Structural Characterization of Orthorhombic LiMnO2 with Low Stacking Faults
Crater Structure and Photoluminescence of Porous Silicon
Tuning the Pore Size of Monodisperse SBA-15 Spheres
Shape-Controlled Synthesis and Pattern Recognition of Core-Shell Co-Al Hydroxides Superstructures
Application of Multifunctional Scouring Agent for Cotton Fabric Bleaching
Improvement of Light Fastness of Liyuan Blue FL-RN Reactive Dye
Pilot-Scale Study on Masking Agents for Titanium Tanning
Waste Solid Byproducts of Microalgae Oil Made into Green Energy
Chapter 3: Nanomaterials and Nanotechnologies
Synthesis and Characterization of Poly(o-chloroaniline) Micro/Nanostructures in a Novel Redox System
Controllable Synthesis of Functional Polyaniline Nanotubes via a Complex Template
Preparation and Characterization of Silica/Polymer Hybrid Submicron Particles via a Semi-Continuous Soap-Free Emulsion Polymerization
Preparation of Silica/Polymer Hybrid Nanoparticles via a Semi-Continuous Soup-Free Emulsion Polymerization
Nanocrystalline Diamond Film Deposited by Double Bias-Voltage Assited HF-PECVD System
Effect of n-LaB4O7 Additive on Tribological Behaviors of Ion Nitrocarburized Layer at Higher Temperature
Effect of n-Na2B4O7 Additive on Tribological Performances of Ion Nitrocarburized Layer
Preparation and Characterization of W@SiO2 Shielding Composite Microsphere
The Optimum of Preparation and Characterization of Aerogels like Hydrophobic Titania by Ambient Pressure Drying
Fabrication and Characterization of Nano-Sized Starch Particles
Solvothermal Synthsis of Nano-Sized Li4Ti5O12 Particles as Anode Material for Lithium Ion Batteries
Kinetics and Thermodynamics of Adsorption of Cr(VI) on Nano Magnetic NiFe Particles in an Aqueous Solution
Cobalt Monoxide Nanoparticles Modified Glassy Carbon Electrodes as a Sensor for Determination of Nitrite
Synthesis and Characterisation of WS2 IF Nanoparticles via Solid-Gas Reaction between WO3 and S
Research on the Surface of Nano H68 Alloy Surface Corro Sion Mechanism
PLA Nanofiber Formation during Solution Blowing
Fabrication of Through-Hole TiO2 Nanotube Arrays by Bilayer Ti Foils Anodization
Preparation and Characterization of Carbon/CNTs Hybrid Nanofibers via a Simple Electrospinning Route
Synthesis and UC Luminescence Properties of NaYF4:Yb,Er Microsheets
Property Research of Silk Fibroin Nanofibers by Electrospinning Dissolved in CaCl2-Formid Acid
Silver Liquid-Like Film Prepared by Self-Assembly for Magnetic Fluid Deformable Mirrors
Preparation and Adsorption Properties of Starch-g-Polyacrylamide/Montmorillonite Nanocomposites
Facile Synthesis of Co3O4/Nitrogen-Doped Graphene Composite and their Electrochemical Performances
Biodegradable Oph-POSS/Poly(Lactic Acid) Nanocomposites: Morphology, Thermal Stability and Degradation Property
Preparation and Properties of CNTs Reinforced BMI/DBA Nanocomposites
Excimer Laser Crystallization of Nanocrystalline Silicon Thin Films
The Application of Nanoparticles in Enhancing Oil Recovery by Wettability Alteration
Measuring Microscopic Properties of a Single-Crystalline Diamond by Nano-Indentation Technology
Research on Hall Effect of Graphene by Var Der Pauw Method
Chapter 4: Materials for Microelectronic Industry and Magnetic Materials
Surface Morphology of AlN Nucleation Layer Grown on Si by MOCVD
Hydrothermal Synthesis and Luminescent Properties of Spherical LaPO4:Ln3+ (Ln3+= Eu3+, Dy3+, Ce3+, Tb3+)
Impact of Doping of Bi3+ on Luminescent Properties of Red Phosphors Sr3-xGaO4F:xEu3+
Study on Influence of Ca2+ Ions Doping at a Site on Magnetic Properties and Magnetocaloric Effect of Nominal Compositions La1.4Sr1.6-xCaxMn2O7
Observation of Substrate Silicon Incorporation into Thin Lanthanum Oxide Film during Rapid Thermal Annealing
Photoelectrochemical Properties of Anatase TiO2 Films Prepared by Improved Liquid Phase Deposition
Anomalous Hall Effect of the Co Thin Film Deposited by High-Pressure Magnetron Sputtering
The Optical and Electrical Properties of Al and (Al, Cu) Doped ZnO Film
Temperature Dependent Current-Voltage Characteristics of n-Type ß-FeSi2/Intrinsic Si/p-Type Si Heterojunctions
Effect of Neodymium on the Glass-Forming Ability and Magnetic Properties of Fe-Based Bulk Amorphous Alloys
Synthesis Photosical Properties of Silicon-Containing Cross-Linked Polymer
Structure, Magnetoresistance and Electrical Properties of La0.8SrxCa0.2-xMnO3 Compounds
Effect of Pr on Wettability and Mechanical Property of Sn-0.3Ag-0.7Cu Lead-Free Solder
Liquidus and Wettablity of Lead-Free Solder Alloys
Investigation of Ni-Microalloyed Sn-0.5Cu Lead-Free Solders
Phase-Field Simulation for Effect of Annealing Temperature on Oxygen Clusters’ Evolution in Silicon Wafer
Chapter 5: New Functional Materials
Fabrication and Characterization of Anti-Microbial and Anti-Ultraviolet Nonwoven by Electrospinning
Investigation of Mid-Infrared Millimeter Wave Radome with Polycrystalline Magnesium Fluoride
Making Thermoelectric Materials SnxGa1-xNx Alloys by Magnetron Sputtering Technology
Orange Peels Derived Activated Carbon as Sulfur Cathode Supporter for Lithium/Sulfur Batteries
Preparation and Performance of Super-Absorbent Resin Using Polyacrylonitrile Fiber Wastes
Research on Mechanical Properties of TiNi Shape Memory Alloy Wires Reinforced Al Matrix Composite Material
Effects of Sr Doping Content on the Structure and Morphologies of La0.7SrxCa0.3-xMnO3
Chapter 6: Polymers, Composites and Compounds
Characterization of Carbon Composites Properties for Application in Sport Industry
Flame-Retardant Properties of Polyester Fabrics Reinforced Phenolic Resin Modified with Silazanes Composites
Preparation of Modified Urea-Formaldehyde/Phosphate Foamed Thermal Insulation Material
Experimental Investigation of Possibilities Vacuum Infusion Technology to Produce Composite Ribs
Evaluation of Different Flame Retardant Combinations for Core/Shell Structured Wood-Plastic Composites by Using a Cone Calorimeter
Research on Pipe Clamps Made of Resin Matrix Composites
Synthesis and Characteristic of Borazine-Silicon-Containing Arylacetylene Resin
Synthesis and Electrochemical Properties of Spherical LiFePO4/C Composite via Spray Drying
Research on Microstructure and Wear Resistance of (Fe,Cr)7C3/Fe Surface Gradient Composite
Synthesis, Characterization and Applications of Late-Transition Metal Branched Polyethylene
The Effect of Pre-Crosslinked CTBN on the Mechanical Properties and Morphology of Epoxy Resin
Microstructure of In Situ Reaction TiB2/Zn-30Al-1Cu Composites Prepared by Spray Deposition Process
Structure and Properties of Hydrolyzed Cyclization-Crosslinking Flame-Retardant Polyacrylonitrile Fiber
Nonisothermal Crystallization Behavior of Poly(vinylidenefluoride)/Polysulfone/Diethylene Glycol Dibenzoate/Dibutyl Phthalate System via Thermally Induced Phase Separation
Study of Conductive and Friction Properties of Grease Containing Carbon Black Additive
Impact Damage Analysis and Experimental Test of Carbon/Epoxy Composite Laminate
Ethanol Pretreatment on Etching of Nylon 6 Films Using Atmospheric Pressure Plasma
Microstructures and Mechanical Properties of Zirconium Dioxide Modified Carbon/Carbon Composites
Microwave Synthesis of the Composites (a-Al2O3+TiB2)/NiAl from Al-TiO-B-Ni System
Microwave Assisted Synthesis of Quercetin-Selective MIPs Grafted on Silica Gel Surface
Synthesis of Ultra-High Molecular Weight Polyacrylonitrile (UHMWPAN) by Aqueous Suspension Polymerization
The Formation and Characterization of Poly (p-phenylene benzobisoxazole) Pulps via Stirred Solutions
Effect of Organoclay Platelets on Crystallization of PTT/EVA-g-MA Blends: Non-Isothermal Melt Crystallization Kinetics
The Preparation of CMC-PVA-AM Dust Suppression Agent and its Application Appraisement
Preparation and Swelling Properties of Organoclay/Super-Absorbent Resin Using Polyacrylonitrile Fiber Wastes
Effect of Radiation Dose on the Creep Properties
Preparation of an Active Packaging Material and its Application on Strawberry Preservation
Slashing and Weaving Properties of Twisted Carbon Fiber Yarns
Preparation and Properties of Kevlar or Polysulfonamide Pulp Reinforced Activated Carbon Fiber Paper
Study on the Mechanical Properties of Carbon Fiber Composite Material of Wood
Mechanical Properties of the PcBN-Alcomposites are Improved by Pressure Infiltration
General Method for Optimizing Composite Patch Repairs
Chapter 7: Surface of Materials, Coatings and Surface Engineering
Improvement in Corrosion and Adhesion Resistance of a Al2O3-CeO2 Nanocomposite Coating on the Aluminum Alloy AA6061 via Surface Pretreatment
Ablation Property of the Plasma Sprayed NiCrAlY-ZrO2 Compound Coating on Stainless Steel Material
Research of Microstructure and Hardness of Co55 and W Coating Made by Laser Cladding
Experimental Study of Nano-Al2O3 Particles Reinforced Fe-Based Composite Coating Made by Laser Cladding
The Effect of Graphite Content on the Wear Behavior of Ni/WC/G Composite Coating
Corrosion of 50%(Ni-22%Cr-10%Al-1%Y)-50%(ZrO2-8%Y2O3) Coatings in Na2SO4 and 75%NaCl-25%Na2SO4 Salts
Research of Rust Layer Stabilization on Bare Steel
Study on Microstructure of the Matrix/Dense Inner Layer Interface in Micro-Arc Oxidizing on Magnesium Alloys
Influence of Oxidation Temperature on the High-Temperature Oxide Film Forming Behavior of T22 Heat-Exchange Tubes
Influence of Passivation Coatings Synthesized by Atomic Layer Deposition on Li-Ion Batteries Cathode Cycle Life
A Effects of Nano-Particles Additives on Wear Performance of Micro-Arc Oxidation Coating Prepared on 2A12 Aluminum Alloy
Study on Microstructure and Fracture Toughness of TaC Ceramic Coating on HT300
Microstructure and Hardness of NbC Coating Produced In Situ
Synthesis and Characterization of CeO2-Al2O3 Nanocomposite Coating on the AA6061 Alloy
Numerical Analysis of the Influence of Graphite Nodule Size on the Pitting Resistance of Austepered Ductile Iron Gears
Early Corrosion Behavior of Pipeline Steel Containing 1% Cr in Sea Water Environment
Investigating the Effect of Hydrophilic Surface Modification on Droplet Evaporation
Experimental Study on Laser Melting of Cemented Carbide Coatings by High Velocity Oxy-Fuel Spraying
Chapter 8: Biomaterials, Biotechnology and Biochemistry
Conjugation, Identification and Bionomics Analysis of EGFR Targeting Drug TGF a-Saporin as a Bioactive Stent Coating Material
Molecular Mechanism on Inhibition of MB Angiogenesis by Curcumin Blocking the Wnt/ß-Catenin and NF- B Signaling Pathway and Inhibiting the Expression of VEGFs/VEGFRs
Mechanisms of Plant Polyphenol Genistein on Regulation of EMT in Ovarian Carcinoma
Fabrication of Eprinomectin-Loaded PLGA Microspheres and their In Vitro Veterinary Release Profiles
Influence of Rotation Rate of Collecting Roller on the Mechanical Property of PCL/SF Tubular Scaffolds
Plant Compound Curcumin Mediates Calcineurin Activity to Upregulate ABCA1 Expression in a Model of Alzheimer’s Disease
Influence of Hydrodynamic Cavitation on the Viscosity of Raw Sugar Solution
Application Research of Lipid Microsphere Biological Carrier Material on Prescription of Tanshinone II a Lipid Microsphere by Central Composite Design-Response Surface Method
Effects and Comparison of
