Sonstiges, Englisch, Band Volumes 1120-1121, 1558 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Advanced Materials Research
Sonstiges, Englisch, Band Volumes 1120-1121, 1558 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Advanced Materials Research
ISBN: 978-3-03859-299-0
Verlag: Trans Tech Publications
The 274 papers are grouped as follows:
Chapter 1: Films, Ceramics and Glasses;
Chapter 2: Electrochemistry, Chemical Materials and Technologies;
Chapter 3: Nanomaterials and Nanotechnologies;
Chapter 4: Materials for Microelectronic Industry and Magnetic Materials;
Chapter 5: New Functional Materials;
Chapter 6: Polymers, Composites and Compounds;
Chapter 7: Surface of Materials, Coatings and Surface Engineering;
Chapter 8: Biomaterials, Biotechnology and Biochemistry;
Chapter 9: Metals and Alloys in Industrial Applications;
Chapter 10: Materials Processing Technologies;
Chapter 11: Engineering of Technological Processes;
Chapter 12: Building Materials and Technologies in Construction
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Micromechanical Properties of Glass-Filled Polyamide 6Effect of Sintering Temperature on Phase Formation and Dielectric Properties of PLZT-BT CeramicsResearch on Mechanical Characteristic of Micro-Nano Structure TaC Ceramic by NanoindentationInitial Growth Mechanism of Atomic Layer Deposited Hafnium Dioxide Using Cyclopentadienyl-Type Precursor: A Density Functional Theory StudyEffects of Al(OH)3 on the Structure and Properties of Foam Ceramics Cemented by PhosphateMicro-Drilling of Pre-Sintered Alumina CeramicInfluences of Pre-Sintered Ceramic Compacts Processing Parameters on Tool WearEffect of Titanium Dioxide Manufacturing Waste in Mechanical Properties of Red CeramicsCompositional Dependence of Residual and Interfacial Stresses in Thin Film Systems with Substantial Thermal Mismatch CharacteristicsPreliminary Structure Characterization of UV Curing Paint FilmNovel Ordered Layered Double Hydroxides Ultra Thin Films Functionalized with Dawson-Type Polyoxometalates: Synthesis, Characterization and Photocatalytic Behavior under Visible LightEffect of the Iron Ion Doping in LaCoO3 Perovskite, Both in Powders and in Sintered Samples Obtained from Combustion Reaction and Solid State RouteImproving the Surface Wettability of Parylene C Film by Hyperthermal Hydrogen Induced Cross-Linking TechnologyEffect of Cooling Rate, Tungsten Fiber Addition and Annealing on Deformation and Mechanical Properties of Zr-Based Bulk Metallic Glasses Under a NanoindenterEffect of Ce Substitution on Mechanical and Thermal Properties of Tetragonal YSZ: First-Principles CalculationsEffect of Sc, Y, Yb, Hf, Ce on Mechanical and Thermal Properties of La2Zr2O7: First-Principles CalculationsPiezoelectric and Ferroelectric Properties of KNN-LS-BF1-xCx CeramicsInvestigation of Preparation and Thermoelectric Properties of Ca2.5La0.5Co4O9 Porous CeramicsStudy of Leaching Zinc from Difficult Dealt Zinc Oxide Ore with High Silicon in the AlkaliSynthesis and Salt Resistance of Novel Polyampholyte P(DMAPMA-co-HEA)-CAElectrochemical Properties of Chemically Etched-NbO2 as a Negative Electrode Material for Lithium Ion BatteriesA Preliminary Study on Li4Ti5O12 as a Novel Electrode Material for Calcium Ion BatteriesEffects of Preparation Conditions on Alkali-Activation Reactivity of Chemosynthetic Al2O3-2SiO2 PowdersStudy of Circulation of Reaction Liquid in Liquid Phase Synthesis of LiFePO4 as Cathode MaterialSynthesis of Li2Fe0.5Mn0.5SiO4/C as Cathode Material for Lithium-Ion Batteries Using Amorphous Li2SiO3 Study on Using Chenghe Fly Ash to Prepare 4A Molecular SievePreparation of CMC-PVA/PAN-FePc(COOH)8/CS-PVA Bipolar Membrane and its Application in Electro-Oxidized Synthesis of Dialdehydle StarchLightweight Foams with Open-Cell Structure Prepared by Pickering High Internal Phase EmulsionsSynthesis of and Characterization of Polyhedron of Mn2O3 Nanoparticles Using Spent Zn-Mn BatteriesThe Stability Study on Vanadium DioxideSupramolecular Complex Formed by Fumaric Acid and Piperazine: Crystal Structure, and Synthon CooperationHydrothermal Synthesis and Structural Characterization of Orthorhombic LiMnO2 with Low Stacking FaultsCrater Structure and Photoluminescence of Porous SiliconTuning the Pore Size of Monodisperse SBA-15 SpheresShape-Controlled Synthesis and Pattern Recognition of Core-Shell Co-Al Hydroxides SuperstructuresApplication of Multifunctional Scouring Agent for Cotton Fabric BleachingImprovement of Light Fastness of Liyuan Blue FL-RN Reactive DyePilot-Scale Study on Masking Agents for Titanium TanningWaste Solid Byproducts of Microalgae Oil Made into Green EnergySynthesis and Characterization of Poly(o-chloroaniline) Micro/Nanostructures in a Novel Redox SystemControllable Synthesis of Functional Polyaniline Nanotubes via a Complex TemplatePreparation and Characterization of Silica/Polymer Hybrid Submicron Particles via a Semi-Continuous Soap-Free Emulsion PolymerizationPreparation of Silica/Polymer Hybrid Nanoparticles via a Semi-Continuous Soup-Free Emulsion PolymerizationNanocrystalline Diamond Film Deposited by Double Bias-Voltage Assited HF-PECVD SystemEffect of n-LaB4O7 Additive on Tribological Behaviors of Ion Nitrocarburized Layer at Higher TemperatureEffect of n-Na2B4O7 Additive on Tribological Performances of Ion Nitrocarburized LayerPreparation and Characterization of W@SiO2 Shielding Composite MicrosphereThe Optimum of Preparation and Characterization of Aerogels like Hydrophobic Titania by Ambient Pressure DryingFabrication and Characterization of Nano-Sized Starch ParticlesSolvothermal Synthsis of Nano-Sized Li4Ti5O12 Particles as Anode Material for Lithium Ion BatteriesKinetics and Thermodynamics of Adsorption of Cr(VI) on Nano Magnetic NiFe Particles in an Aqueous SolutionCobalt Monoxide Nanoparticles Modified Glassy Carbon Electrodes as a Sensor for Determination of NitriteSynthesis and Characterisation of WS2 IF Nanoparticles via Solid-Gas Reaction between WO3 and SResearch on the Surface of Nano H68 Alloy Surface Corro Sion MechanismPLA Nanofiber Formation during Solution BlowingFabrication of Through-Hole TiO2 Nanotube Arrays by Bilayer Ti Foils AnodizationPreparation and Characterization of Carbon/CNTs Hybrid Nanofibers via a Simple Electrospinning RouteSynthesis and UC Luminescence Properties of NaYF4:Yb,Er MicrosheetsProperty Research of Silk Fibroin Nanofibers by Electrospinning Dissolved in CaCl2-Formid AcidSilver Liquid-Like Film Prepared by Self-Assembly for Magnetic Fluid Deformable MirrorsPreparation and Adsorption Properties of Starch-g-Polyacrylamide/Montmorillonite NanocompositesFacile Synthesis of Co3O4/Nitrogen-Doped Graphene Composite and their Electrochemical PerformancesBiodegradable Oph-POSS/Poly(Lactic Acid) Nanocomposites: Morphology, Thermal Stability and Degradation PropertyPreparation and Properties of CNTs Reinforced BMI/DBA NanocompositesExcimer Laser Crystallization of Nanocrystalline Silicon Thin FilmsThe Application of Nanoparticles in Enhancing Oil Recovery by Wettability AlterationMeasuring Microscopic Properties of a Single-Crystalline Diamond by Nano-Indentation TechnologyResearch on Hall Effect of Graphene by Var Der Pauw MethodSurface Morphology of AlN Nucleation Layer Grown on Si by MOCVDHydrothermal Synthesis and Luminescent Properties of Spherical LaPO4:Ln3+ (Ln3+= Eu3+, Dy3+, Ce3+, Tb3+)Impact of Doping of Bi3+ on Luminescent Properties of Red Phosphors Sr3-xGaO4F:xEu3+Study on Influence of Ca2+ Ions Doping at a Site on Magnetic Properties and Magnetocaloric Effect of Nominal Compositions La1.4Sr1.6-xCaxMn2O7Observation of Substrate Silicon Incorporation into Thin Lanthanum Oxide Film during Rapid Thermal AnnealingPhotoelectrochemical Properties of Anatase TiO2 Films Prepared by Improved Liquid Phase DepositionAnomalous Hall Effect of the Co Thin Film Deposited by High-Pressure Magnetron SputteringThe Optical and Electrical Properties of Al and (Al, Cu) Doped ZnO FilmTemperature Dependent Current-Voltage Characteristics of n-Type ?-FeSi2/Intrinsic Si/p-Type Si HeterojunctionsEffect of Neodymium on the Glass-Forming Ability and Magnetic Properties of Fe-Based Bulk Amorphous AlloysSynthesis Photosical Properties of Silicon-Containing Cross-Linked PolymerStructure, Magnetoresistance and Electrical Properties of La0.8SrxCa0.2-xMnO3 CompoundsEffect of Pr on Wettability and Mechanical Property of Sn-0.3Ag-0.7Cu Lead-Free SolderLiquidus and Wettablity of Lead-Free Solder AlloysInvestigation of Ni-Microalloyed Sn-0.5Cu Lead-Free SoldersPhase-Field Simulation for Effect of Annealing Temperature on Oxygen Clusters? Evolution in Silicon WaferFabrication and Characterization of Anti-Microbial and Anti-Ultraviolet Nonwoven by ElectrospinningInvestigation of Mid-Infrared Millimeter Wave Radome with Polycrystalline Magnesium FluorideMaking Thermoelectric Materials SnxGa1-xNx Alloys by Magnetron Sputtering TechnologyOrange Peels Derived Activated Carbon as Sulfur Cathode Supporter for Lithium/Sulfur BatteriesPreparation and Performance of Super-Absorbent Resin Using Polyacrylonitrile Fiber WastesResearch on Mechanical Properties of TiNi Shape Memory Alloy Wires Reinforced Al Matrix Composite MaterialEffects of Sr Doping Content on the Structure and Morphologies of La0.7SrxCa0.3-xMnO3Characterization of Carbon Composites Properties for Application in Sport IndustryFlame-Retardant Properties of Polyester Fabrics Reinforced Phenolic Resin Modified with Silazanes CompositesPreparation of Modified Urea-Formaldehyde/Phosphate Foamed Thermal Insulation MaterialExperimental Investigation of Possibilities Vacuum Infusion Technology to Produce Composite RibsEvaluation of Different Flame Retardant Combinations for Core/Shell Structured Wood-Plastic Composites by Using a Cone CalorimeterResearch on Pipe Clamps Made of Resin Matrix CompositesSynthesis and Characteristic of Borazine-Silicon-Containing Arylacetylene ResinSynthesis and Electrochemical Properties of Spherical LiFePO4/C Composite via Spray DryingResearch on Microstructure and Wear Resistance of (Fe,Cr)7C3/Fe Surface Gradient CompositeSynthesis, Characterization and Applications of Late-Transition Metal Branched PolyethyleneThe Effect of Pre-Crosslinked CTBN on the Mechanical Properties and Morphology of Epoxy ResinMicrostructure of In Situ Reaction TiB2/Zn-30Al-1Cu Composites Prepared by Spray Deposition ProcessStructure and Properties of Hydrolyzed Cyclization-Crosslinking Flame-Retardant Polyacrylonitrile FiberNonisothermal Crystallization Behavior of Poly(vinylidenefluoride)/Polysulfone/Diethylene Glycol Dibenzoate/Dibutyl Phthalate System via Thermally Induced Phase SeparationStudy of Conductive and Friction Properties of Grease Containing Carbon Black AdditiveImpact Damage Analysis and Experimental Test of Carbon/Epoxy Composite LaminateEthanol Pretreatment on Etching of Nylon 6 Films Using Atmospheric Pressure PlasmaMicrostructures and Mechanical Properties of Zirconium Dioxide Modified Carbon/Carbon CompositesMicrowave Synthesis of the Composites (a-Al2O3+TiB2)/NiAl from Al-TiO-B-Ni SystemMicrowave Assisted Synthesis of Quercetin-Selective MIPs Grafted on Silica Gel SurfaceSynthesis of Ultra-High Molecular Weight Polyacrylonitrile (UHMWPAN) by Aqueous Suspension PolymerizationThe Formation and Characterization of Poly (p-phenylene benzobisoxazole) Pulps via Stirred SolutionsEffect of Organoclay Platelets on Crystallization of PTT/EVA-g-MA Blends: Non-Isothermal Melt Crystallization KineticsThe Preparation of CMC-PVA-AM Dust Suppression Agent and its Application AppraisementPreparation and Swelling Properties of Organoclay/Super-Absorbent Resin Using Polyacrylonitrile Fiber WastesEffect of Radiation Dose on the Creep PropertiesPreparation of an Active Packaging Material and its Application on Strawberry PreservationSlashing and Weaving Properties of Twisted Carbon Fiber YarnsPreparation and Properties of Kevlar or Polysulfonamide Pulp Reinforced Activated Carbon Fiber PaperStudy on the Mechanical Properties of Carbon Fiber Composite Material of WoodMechanical Properties of the PcBN-Alcomposites are Improved by Pressure InfiltrationGeneral Method for Optimizing Composite Patch RepairsImprovement in Corrosion and Adhesion Resistance of a Al2O3-CeO2 Nanocomposite Coating on the Aluminum Alloy AA6061 via Surface PretreatmentAblation Property of the Plasma Sprayed NiCrAlY-ZrO2 Compound Coating on Stainless Steel MaterialResearch of Microstructure and Hardness of Co55 and W Coating Made by Laser CladdingExperimental Study of Nano-Al2O3 Particles Reinforced Fe-Based Composite Coating Made by Laser CladdingThe Effect of Graphite Content on the Wear Behavior of Ni/WC/G Composite CoatingCorrosion of 50%(Ni-22%Cr-10%Al-1%Y)-50%(ZrO2-8%Y2O3) Coatings in Na2SO4 and 75%NaCl-25%Na2SO4 SaltsResearch of Rust Layer Stabilization on Bare SteelStudy on Microstructure of the Matrix/Dense Inner Layer Interface in Micro-Arc Oxidizing on Magnesium AlloysInfluence of Oxidation Temperature on the High-Temperature Oxide Film Forming Behavior of T22 Heat-Exchange TubesInfluence of Passivation Coatings Synthesized by Atomic Layer Deposition on Li-Ion Batteries Cathode Cycle LifeA Effects of Nano-Particles Additives on Wear Performance of Micro-Arc Oxidation Coating Prepared on 2A12 Aluminum AlloyStudy on Microstructure and Fracture Toughness of TaC Ceramic Coating on HT300Microstructure and Hardness of NbC Coating Produced In SituSynthesis and Characterization of CeO2-Al2O3 Nanocomposite Coating on the AA6061 AlloyNumerical Analysis of the Influence of Graphite Nodule Size on the Pitting Resistance of Austepered Ductile Iron GearsEarly Corrosion Behavior of Pipeline Steel Containing 1% Cr in Sea Water EnvironmentInvestigating the Effect of Hydrophilic Surface Modification on Droplet EvaporationExperimental Study on Laser Melting of Cemented Carbide Coatings by High Velocity Oxy-Fuel SprayingConjugation, Identification and Bionomics Analysis of EGFR Targeting Drug TGF a-Saporin as a Bioactive Stent Coating MaterialMolecular Mechanism on Inhibition of MB Angiogenesis by Curcumin Blocking the Wnt/?-Catenin and NF-?B Signaling Pathway and Inhibiting the Expression of VEGFs/VEGFRsMechanisms of Plant Polyphenol Genistein on Regulation of EMT in Ovarian CarcinomaFabrication of Eprinomectin-Loaded PLGA Microspheres and their In Vitro Veterinary Release ProfilesInfluence of Rotation Rate of Collecting Roller on the Mechanical Property of PCL/SF Tubular ScaffoldsPlant Compound Curcumin Mediates Calcineurin Activity to Upregulate ABCA1 Expression in a Model of Alzheimer?s DiseaseInfluence of Hydrodynamic Cavitation on the Viscosity of Raw Sugar SolutionApplication Research of Lipid Microsphere Biological Carrier Material on Prescription of Tanshinone II a Lipid Microsphere by Central Composite Design-Response Surface MethodEffects and Comparison of Curcumin on Morphology Changes of Chronic Cerebral Hypoperfusion in Young and Aged RatsThe Progress in Cloning, Expression and Purification of Cholinesterase in Pichia pastoris: One Kind of Biomaterial for the Detection of Residual Insecticide ContaminationEffects of Plant Compound Curcumin on Learning and Memory of Chronic Cerebral Hypoperfusion RatsProduction, Characterization and Bioactivity of 46S6 Bioactive Glass from Rice Hull Ash SilicaStudy of Endocrine Disruptors in the Sediment of a South Brazilian RiverPreparation and Characterization of Radiopaque Calcium Alginate Microspheres Embedded Silver NanoparticlesStudy on Preparation Technology Optimization of Sultamicillin Tosilate-?-CyclodextrinMicrobial Transformation of Glycyrrhetinic Acid by Colletotrichum lini AS3.4486Preparation of Aspirin-?-Cyclodextrin Inclusion Complex by Grinding MethodAdsorption and Dehydration of Water Molecules from a, ? and ? Cyclodextrins ? A Study by TGA Analysis and GravimetryProduction of Cellulase by Aspergillus niger FC-1 and its Application in Hydrolysis of Corncob ResiduesLycopene Nanoparticles Coated with Microemulsions to Improve StabilitySynthesis of Hybrid Fe3O4?Silica?M(Zn, Cu, Ni) Submicrospheres and its Application for Adsorption on Bovine HemoglobinSynthesize of Carboxymethyl Chitosan-Graft-Polycaprolactone (CMCS-g-PCL) and the Preparation of MicellesCharacterization and Study on In Vitro Release of Praziquantel from Poly(lactide-co-glycolide) ImplantsAntioxidant Properties of Extracts from Curcuma zedoaria RhizomeThe Influence of Replant Stress on Hormone and Absorption of Root for Different Apple RootstocksFinite Element Simulation of Pore Morphology and Stress Distribution of Porous TitaniumEffect of Mn on the Microstructure and Hardness of Gear Steel Treated by Quenching and Partitioning ProcessAnalysis and Research on Different Thermal Conditions of Copper BarHot Deformation Behavior of Nano-Precipitation Strengthening SteelEffect of the Cooling Time in Annealing at 350?C on the Phase Transformation Temperatures of a Ni55Ti45 wt. AlloyMagnetic Field Effect on Creep of Polycrystalline CopperEvaluation on Interface Bonding of Thin Aluminum Clad Steel StripSliding Wear Behavior of AM60 Alloys with Alloyed YttriumInfluence of Quench and Tempering Temperature on the Microstructure and Properties of 20SiMn2MoVA SteelEffect of Grain Refiner C2Cl6 on Tensile Properties of Squeeze Cast Mg Alloy AM60The Transformation of Martensite and Analysis of its Microstructure and Properties in Carbon SteelInterface Characterization of Bimetallic Casting with a 304 Stainless Steel Surface Layer and a Gray Cast Iron BaseEffect of Inclusion on Pitting Corrosion of X80 Pipeline SteelMicrostructure, Texture and Property of Interstitial-Free (IF) Steel after Ultra-Fast AnnealingExperimental Study of the Fatigue Crack Propagation and Overloading Retardation in TA2 PlateEffect of Cold Deformation on Precipitation of 7050 Aluminum Alloy during Aging ProcessProperties and Microstructure of an Al-Zn-Mg-Cu Alloy ForgingFailure Analysis of a 304 Stainless Steel FlangeThe Electrochemical Study on Corrosion of Heat Affected Zone of Stainless Steel Weldment in Seawater under Different Welding ProceduresInvestigation on the Corrosion Behavior of Cast and Extrude AZ61 Mg Alloys in NaCl Atmosphere at High Temperature and PressureModeling of Non-Isothermal Ferrite Transformation in Fe-C-Mn-Si AlloysEffect of Pass Deformation on the Microstructure and Properties of Aluminum Alloy Anodes for Fuel Cell ApplicationMechanical and Corrosion Behaviors of the Casting Al-Cu Alloy Modified by Nano-Scale PrxOy and LaxOyThe Influence of Different Gas Welding Flame on Corrosion Behavior of the Carbon Steel?s Heat Affected Zone in SeawaterEffect of Heat Treatment on the Resistivity and Mechanical Property of Low-Pressure Semi-Solid Die Cast Aluminum Alloy WheelStudy of Micro-Abrasive Wear Resistance of Heat Treated NiTi AlloysCorrosion and Protection of Magnesium AlloysThe Fatigue Crack Propagation of Al?Mg?Mn?Zr Alloy with ErbiumStudy on the Thermal Field Distribution of Steel Claws for Anode in Aluminium Electrolysis CellResearch on Mechanical Properties of Micro-Electroforming NiCompatibility between the Molten Mg-25Al-15Zn-14Cu Alloy and Stainless Steel for Phase-Transformation Thermal Storage FacilityStudy on the Microstructure and Storage Heat Performance of Mg-25Al-15Zn-xCu AlloysRelationship of Microstructure and Mechanical Properties in Er-Containing Aluminum AlloyInfluence of Tempertature on Corrosion Behavior of DH36 Steel in Seawater Full Immersion ZoneEffects of Rotating Magnetic Field on Microstructure and Properties of Bi-Containing Hypereutectic Al-Si AlloyDynamic Compressive Behavior and Damage Mechanism of Magnesium AlloyNumerical Simulation of Concentration Field for Be/00Cr17Ni14Mo2 Stainless Steel by Diffusion Bonding
In Situ X-Ray Diffraction during Casting: Study of Hot Tearing in Al-Zn AlloysPrediction of Chip Morphology and Formation in High Speed Milling of Hardened SteelsNumerical Simulation Analysis for Padding Assisted Roll-Bending ProcessFluidity of Plastic Blends with a Recycled FillerImprovement of PA6 Mechanical Properties by Radiation Cross-LinkingStrength of Bonded Joints of Polypropylene after Radiation Cross-LinkingStudy of Charpy Impact Properties of PC with Different Amount of Recycled Material and TemperaturesMicro-Indentation Test of Cross-Linking PolyethyleneIrradiation of Polyamide Measured by Micro-Indentation TestThermo-Mechanical Properties and Tensile Behaviour of Modified HDPE by Beta Rays after Temperature Load at 220 ?CMechanical Behavior of the Cr3C2 Compound at High Pressure and High TemperatureInfluence of Technological Parameters on Material FlowMicromechanical Properties of Thermoplastic Elastomer (TPE-E)Research on Law and Mechanism of Hydrogen Induced Softening in Ti6Al4V Alloy in the Temperature Range 400 ?C to 1010 ?CStudy on the Annealing Process of a Cu-Zn-Al-Ni AlloyStudy on the High Shear Degassing Process with Water SimulationElectromagnetic Micro-Punching Process of T2 Copper FoilResearch on the Temperature Changes of 20CrNiMoH Steel during Turning ProcessResearch on Manufacturing the Metal Foams with Regular Cells by 3D PrintingExperimental Studies of Submicron Polycrystalline Diamond without Binder under High Pressure and TemperatureAnalysis on the Optimal Process of Aluminum Profile Extrusion with Two-Hole DiesExperimental Investigations on Cylindrical Grinding Temperature of Silicon CarbideEvaluation of Deep Criogenic Treatment at Microabrasive Wear of Aisi D2 SteelResearch of Cold Extrusion Process for the 2A12 Duralumin PistonsStudying of Microstructure and Properties of Selective Laser Melted Titanium-Based AlloyResearch on the Elimination of Banded Structure in SAE8620H Gear SteelStudy on Optimization Design of VSR Parameter for Large Welded ComponentsMicrostructure and Properties of TA1 TIG Joint via Micro-Arc OxidationPrediction of Microstructure and Mechanical Properties of Weld Metal in Hybrid Laser-Arc WeldingInfluence of Machining Parameters of the Drilling Polymers UHMW-PE and PTFEImpact on the Reduction Process of Carbon Containing Pellets with Biomass Replacing Traditional Reducing AgentFeatures and Application of Electron Beam Welding TechnologyThe Analysis and Improvement of the Influence Factors for the Fabrication of SMT Template and Laser Cutting TechniqueInfluence of Particle Size of Wheat Powder on Roller Wear PropertiesAn Experiment Study on Squeeze Test and Flow Behavior Analysis of Concentrated Carbon Black SuspensionDevelopment of a Copper Heat Pipe with Axial Grooves Manufactured Using Wire Electrical Discharge Machining (Wire-EDM)Development of CNC Five-Axis Turning Tool Cutter GrinderThe Effect of External Voltage on Pulsed Electrohydrodynamic PrintingInvestigation of the Motion of Materials in Cross Section of a Specific Rotary CoolerDetermination of Gold in Gold Jewelry Alloys by a Synthesis MethodThe Influence of Material Properties on the Hydrodynamic Performance of PropellerResearch on the Multi-Actuator and Sensor Detecting Technology Based on Piezoelectric Composite MaterialsExperimental Analysis of a Vapor Chamber Applied to Thermal Management of MicroelectronicsAnalysis on Influencing Factors of Bus Bar Contact ResistanceThe Study on Porous Media Phase Change Coupling Heat Transfer Model in Enclosed Metal CavitySignal Detection of Welding Joint Flaw Based on Wavelet-Support Vector MachineBoundary Element Analysis for Piezoelectric Cracks by an Interaction IntegralDetermination of Trace Copper in Vanadium Alloy by Flame Atomic Absorption SpectrometryNumerical Analysis on Decay Heat Power of Weapon-Grade PlutoniumNew Materials Applied for the Stationary Phases in View of the Optimized HPLC and UHPLC Column Classification System Used in the Pharmaceutical AnalysisMechanical Properties and Fracture Analysis of a Plant Oil Storage Tank AccidentExperimental Verification of a Stochastic Fatigue Crack Growth ModelSize Effect Mechanism on Foil Rolling Analyzed by Crystal Plasticity Finite Element MethodA Computer-Aided-Design (CAD) System for Four-Step Three-Dimensional BraidingUsing Simulated Data to Support the Calibration Process of ED-XRF AnalysisMethod of Lines to Solve the Linear Temperature Field of LENSThe Preparation of a Kind of Interface Treatment Agent for ConcreteStress Non-Uniformity Simulation Analysis of Prestressed Steel Strands in Curved DuctComparison of Various Techniques for Flexural Strengthening of Thin Concrete Members Using Continuous Carbon FibersStudies of High Temperature Performance of Asphalt Based on Repeated Creep and Recovery TestSpall Strength of Steel Fiber Reinforced ConcretesNumerical Test Research on High-Strength Concrete Square Columns with High-Strength Aseismic Transverse Reinforcement under Concentric CompressionSeismic Performance of Natural Fibre Reinforced Polymer-Concrete Bridge PiersExperimental Study on the Material and Environmental Property of Ancient Adobe BrickPerformance of Ultra-High Strength Concrete Containing Different Types of FibersLoad Transfer Behavior of Cracking for Cement Concrete PavementInterface Bonding Property Finite Element Simulation of Mo Fiber-Reinforced Polymer ConcreteThe Research on Bond Property of Rubber ConcreteCentre of Panel Thermal Conductivity Performance Analysis of Aerocor-Centrifugal Hybrid Ultrafine Glass Fiber VIP Core MaterialsMechanical Properties of Semi-Rigid Steel Frame-Braced Steel Plate Shear WallSeismic Behavior of Steel Plate Shear Walls-Steel Frame
