Sonstiges, Englisch, 1484 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Sonstiges, Englisch, 1484 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
ISBN: 978-3-908452-79-9
Verlag: Trans Tech Publications
This two-volume set of 339 peer-reviewed papers covers the broad areas of Composite, Polymer and Ceramic Materials, Fracture Mechanics and Mechanisms, Materials, Mechanical Structure, Strength and Dynamics, Interface Failure and Failure Analysis, Nano-Mechanics and Structures, Damage and Failure, Structural Design and Optimisation, Fatigue and Crack Propagation, Materials Modelling and Computation, Concrete, Rock and Soil, Dynamic Fracture and Impact, Erosion and Corrosion, Smart Materials and Structures, Biomechanics and Other Novel Methods of Computer Modelling in Engineering and Science.
Autoren/Hrsg.
Fachgebiete
- Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde Materialwissenschaft: Keramik, Glas, Sonstige Werkstoffe
- Technische Wissenschaften Technik Allgemein Computeranwendungen in der Technik
- Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde Materialwissenschaft: Polymerwerkstoffe
- Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde Festigkeitslehre, Belastbarkeit
- Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde Materialwissenschaft: Verbundwerkstoffe
- Mathematik | Informatik EDV | Informatik Angewandte Informatik Computeranwendungen in Wissenschaft & Technologie
- Technische Wissenschaften Verfahrenstechnik | Chemieingenieurwesen | Biotechnologie Technologie der Kunststoffe und Polymere
Weitere Infos & Material
Mechanical Behavior of 2D C/SiC Composites at Elevated Temperatures under Uniaxial CompressionNewly Designed Adhesive Joint for Torque Loaded TubeComparing Study of Energy-Absorbing Behavior for Honeycomb StructuresElectrically Conductive Fibers/Yarns with Sensing Behavior from PVA and Carbon BlackFracture and Plasticity in Nano-Porous Particle-Polymer CompositesThe Effect of Aging and the Protective Coating on the Oxidation Behavior of 6061Al/SiC Composite at High TemperaturesFatigue Damage Mechanism Analyses of Oriented Sheets of Polymethyl Methacrylate GlassesAn Approach for Landslide Stability Evaluation by Numerical MethodThe Stress and Strain Concentrations Associated with Two Interacting Holes in a Finite Thickness Elastic Plate Subjected to Tensile StressCrack Closure Behavior under High-Load Ratio for AISI 4340 SteelAnalytical Concepts for Recent Development in Fatigue Crack Growth under Variable Amplitude Loading. Part I: Qualitative InterpretationEffect of Static Pre-Strain on Low Cycle Fatigue Life of AISI 316L Stainless SteelEffect of Ni Content on Dissolution Properties of Cu in Molten Sn-Ag-Cu-Ni-Ge AlloyAnalysis of Stress-Strain Hysteresis Loop and Prediction of Thermal Fatigue Life for Chip Size Package Solder JointsEffect of Ag Content on Mechanical Properties of Lead-Free Sn-Ag-Cu-Ni-Ge AlloyBuckling Analysis and Optimization of Stiffened Cylindrical Shells under Uniform Axial CompressionInfluence of Strength Level of Steels on Fatigue Strength and Fracture Morphology of Spot Welded JointsEffect of Material Composition on Mechanical Properties of Ceramics-Metal Composite MaterialsThree-Dimensional Stress Analysis by a Digital Image Correlation Method and the Three-Dimensional Local Hybrid MethodDevelopment of the Auto Mesh Generation Program for a Digital Image Correlation MethodDamage Assessment of a Structure by a Digital Image Correlation MethodVibrational Fatigue Analysis of a Strain Loading Using the Frequency and Wavelet Filtering MethodsAnalysis of an Instrumented Charpy Impact Using Power Spectrum DensityEffect of Notched Parameters on Low Cycle Fatigue Life of Shaft with Annular Notch under Cantilever BendingCalculation Stress Intensity Factor for Asphalt Pavement Basing on Weight Function TheoryInfluence of Processing Parameters on Electrophoretically Deposited La0.6Sr0.4Co0.2Fe0.8O3-d FilmsOn the Crack Propagation Trajectory of Central Cracked Plates under Mixed Mode Loading ConditionsFinite Element Analysis of Indentation Cracks for Brittle Materials under Static LoadingEffect of Notched Parameters on Stress Field of Shaft under Torsional LoadingEffects of Locations of Adhesive Hollows on Interfacial StressPropagation Behavior of Interfacial Fatigue Cracks in RC Beams Strengthened with Pre-Stressed FRPAnalysis of Concrete Early-Age Shrinkage Based on the Theory of Humidity DiffusionFatigue Strength Degradation by Irreversible Hydrogen in Cold Drawn Eutectoid SteelsStress Distribution Analysis on Four Types of Stress Corrosion Cracking SpecimenElastic-Plastic Flange Wrinkling of Circular Plates in Deep Drawing ProcessMechanical Properties of Carbon Fiber Reinforced Plastics under Hot-Wet EnvironmentComparison on Compressive Behaviour of Aluminium Honeycomb and Titanium Alloy Micro Lattice BlocksAnalysis of Mechanical Performance of Crumb Rubber Concrete by Different Aggregate Shape under Uniaxial Compression on MesoscopicOptimising Real-Time Performance of Genetic Algorithm Clustering MethodPre and Post Processing for Boundary Element Method (BEM) 3D Reinforced Concrete Corrosion SimulationDurability Assessment of Quad Flat No-Lead Package Using Signal AnalysisInelastic Seismic Response of RC Building with Control SystemEffect of Interfacial Reaction in Sn-Ag-Cu Solder Alloy with Ni AdditionStudy on Joint Deflection of Existing Joint Plain Concrete Pavement upon Adoption of Hot Mixture Asphalt OverlayEffect of Beam Height on Elastic Impact Load Subjected to Transverse Impact of BarPerformance of the Casing-Plug Joints of Square Steel Tube StructuresOut-of-Plane Secondary Bifurcation Buckling Behavior of Elastic Circle Pipe ArchFracture Analyses for Interface Corners in Elastic Materials Subjected to Thermal LoadingNecking Prediction in Tube Hydroforming by Stress-Based Forming Limit DiagramsFinite Element Analysis of 4-Step 3-Dimensional Braided Composite Structure under High Velocity ImpactExperimental Investigation of Residual Thermal Stress in Thermal Barrier Coating (TBC)Numerical Analysis of Elastoplastic Behavior of Foams with Ellipsoidal PoresEffect of Aluminum Nitride (AlN) Addition on Wear and Mechanical Properties of Al-Si Alloy Composites Fabricated by Stir Casting ProcessCharacterisations of Cu-Based Coated Al7075 via Plasma-Spray TechniqueStability Analyses of an Earth Dam Using Limit Equilibrium and Finite Element MethodsPremature Failure of Gas Turbine BladeA New Realization on Electro-Elastic Love Waves In Piezoelectric Layered SolidsThe Development of Validation Technique in Variable Amplitude Loadings Strain Repetitive Data CollectionMicro-Hardness and Residual Stress Relaxation of 2024 T351 Aluminum AlloyThe Resistance of Metallic Sandwich Plates to Blast LoadingEffect of Aqueous Environment on High Cycle and Very-High-Cycle Fatigue Behavior for a Structural SteelEstimation of Elastic Follow-Up in StructuresFailure Analysis of a Herringbone GearEffect of Boundary Conditions on Transient Response of Sandwich Plates with Electrorheological Fluid CoreStructural Similitude between Vibration Response and Flutter Boundary of Cross Ply Composite PlatesThermal Cycling Induced Crack Nucleation and Propagation in Thermal Barrier Coating SystemEffect of Spinel Growth on the Delamination of Thermal Barrier CoatingsNumerical Simulation of Dislocation-Precipitate Interactions Using Dislocation Dynamics Combined with Voxel-Based Finite ElementsPrediction of the Mechanical Properties of Hot-Rolled Low Carbon Steel Strips in Correlation to Chemical Compositions and Rolling ConditionsDevelopment of Tensile Test to Investigate Mechanical Adhesion of Thermal Oxide Scales on Hot-Rolled Steel Strips Produced Using Different Finishing TemperaturesApplication of BEM for Improving Corrosion Assessment of Public Building Stricken by Tsunami Aceh 2004Microstructural Behaviour Study and FEA-Based Fatigue Simulation on Parabolic Leaf SpringMolecular Dynamics Simulation of Dislocation-?-Precipitate Interactions in ??-PrecipitatesStress Corrosion Cracking Analysis under Thermal Residual Stress Field Using S-FEMSurface Crack Mesh Generation with Factory Roof under Mixed Mode Loading Using a Tetrahedral ElementDuctile Fracture Simulation of Pipe under Bending with Initial DefectsInfluence and Sensitivity of Inertial Effect on Void Growth Behavior in Ductile MetalsFar Field Solution of Circular Inclusion and Linear Crack by SH-WaveFatigue Data Analysis Using Continuous Wavelet Transform and Discrete Wavelet TransformFailure Analysis of Steel Superheater Tube Fractured in a Boiler of a Power PlantDurability Analysis of an Automobile Coil Spring Using Hybrid I-KazA New Static Nonlinear Procedure for Assessment of Seismic Performance of High-Rise BuildingsA New S-N Curve Model of Fiber Reinforced Plastic CompositeObserving Load Sequence Effects on Simulated and Experimental Fatigue Crack Growth OccurrenceSteady-State Crack Propagation in Stressed Elastic SolidSimulation and Experimental Analysis of Fatigue Crack Growth under Cyclic LoadingAcceleration, Retardation and Crack Arrest in Stressed Heterogeneous StructuresApplication of Precise Integration in Dielectric Layer PBG Structure in a WaveguideGreen's Function Solution of the Semi-Space with Double Shallow-Buried InclusionsBird Impact Analysis of Wing Leading Edge Structure Based on SPH MethodStress Relaxation and Fatigue Characterisation of Eutectic SnPb Solder AlloyLife Prediction of Rubber Automotive Components Using Finite Element MethodInvestigation of Creep Fatigue Crack Propagation in Aluminium TubeFinite Element Analysis of Rate- and State-Dependent Frictional Contact BehaviorEffect of Specimen Width on the Contact State between the Three-Point Bending Specimen and Supports in Hopkinson BarEffect of Crack on Interfacial Stresses of RC Beam Strengthened with CFRPThe Effect of Thermal Prestress on the Deformation of Micromirror Chip Embedded with Through-Silicon ViasSeismic Response Evaluation of RC Tower Connected to Short Rigid BuildingsStrength Properties of Cellulose Nanofiber Green CompositesA Computational Study of the Overload Characteristic Curves of Projectile Penetrating ConcreteInfluence of the Rise Time and Decay Time of Stress Wave on Spalling Process of Rock-Like MaterialInfluence of Heat Treatment on Characteristic Behavior of Co-Based Alloy Hardfacing Coatings Deposited by Plasma Transferred Arc WeldingNumerical Simulation of Reflective Crack Forming in Semi-Rigid Asphalt Pavement Subjected to Traffic LoadLarge Scale Elasto-Plastic Analysis Using Domain Decomposition Method Optimized for Multi-Core CPU ArchitecturePrediction of Safety Factor for Slope Designed with Various Limit Equilibrium MethodsMixed Mode Partition in one Dimensional FracturesThermal Stress and Thermal Cycling Analyses of Microgyroscope Chip ModelsParallel Eigen Frequency Analysis Using Enriched Free Mesh MethodExperimental Determination of Fatigue Life of Automotive Jounce BumperAnalytical Solution for Pin-Supported Metal Foam Core Sandwich Beam with Local DentingEffects of Al2O3-13% TiO2 Coating Particle Size on Commercial Mild Steel via Plasma Spray MethodElastic-Plastic Analysis of Surface Crack in Round Bars under TorsionThe Study on Fatigue Crack Propagation in Metal Using Finite Element AnalysisFatigue Failure Analysis Using the Theory of Critical DistanceSolution for Geometrically Non-Linear Elastic Deformation of Simple Frames by a Shooting MethodThe Influence of Torsional-Rigidity Bounds for Composite Shafts with Specific Cross-SectionsA Novel Approach to Determine the Elastic Properties of the Interphase between the Aggregate and the Cement PasteData Fusion of Probabilistic Full-Field Measurements for Material CharacterizationEffect of Plasma Spray Variables on Cu-Ni Coated A7075Failure of Composites with Discontinuous Fabric Preform under BendingNumerical Simulation and Experimentation of Warm Metal Powder Compaction ProcessPhase Field Simulation of Ferroelectrics with CracksCracking of NiTi Thin Films Deposited on Cu SubstrateDynamic Response of Metallic Square Honeycomb Sandwich Plate Subjected to Blast LoadingMechanics of Composite Delamination under Flexural LoadingResearch of Surface Deformation with Metro Double Tunnels Construction and the Relative Position ChangeEffect of Sandblasting and Surface Mechanical Attrition Treatment on Surface Roughness, Wettability, and Microhardness Distribution of AISI 316LExperimental Investigation on Mechanical Behavior of Moso Bamboo Vascular BundlesSurface Modification of Pure Titanium by Nitrogen Ion Implantation at Different Beam Energy and DoseEvaluation of Plastic Deformation and Fracture Behaviors by Thermal Image TechniqueNumerical Application in Weight Reduction of Lateral Plate of Rescue RobotStrength and Fracture Characteristics of SUS304/AL-Alloy Scarf Adhesive Joint with Various Adhesive ThicknessesDamage Analysis and Simulation of Rock under High Pressure WaterjetSimulation of a Bio-Adhesion System with ViscoelasticityNumerical Simulation of Rock Fracture under High Pressure Water JetMain Crack Propagation Behaviour of RC Beams Strengthened with CFRP under Fatigue LoadFatigue Failure Behaviour Study of Automotive Lower Suspension ArmMathematical Modeling for Longitudinal Displacement of a Straight Continuously Welded Railway Track and its Numerical ImplementationInvestigation of the Correlation between IC Chip Pick-Up Performance and Peeling Behavior of Adhesive TapesAuto Adjust Masses of Automotive Structures with Desired Centre of GravityA Theoretical Study on the Influence of Frequency on the Dynamic Characteristics of Air FilmInvestigation on Behavior of Rock-Socketed Retaining Piles for Deep ExcavationExperimental and Numerical Investigation of Rubber Extrusion Forming for Multi Material Automobile Weather StripFlexural Wave Localization in Randomly Disordered Periodic Beams with Axial LoadFree Vibration of Tire Road ContactEffect of Interfacial Reaction on Joint Strength of Semiconductor Metallization and Sn-3Ag-0.5Cu Solder BallSolid-Liquid Flows Simulation for Debris Avalanche AnalysisImplementing an Open-Architecture Controller for a Tension-Compression Fatigue Test MachineShrinkage Cracking of High Performance Concrete Mixed with Steel Slag AdmixtureResearch on Pre-Loaded Composite Irradiated by Laser BeamSensitive Analyses of Probabilistic Fracture Mechanics for Reactor Pressure Vessel during Pressurized Thermal Shock and Comparison with the Results of International Round Robin Analyses in Asian CountriesPattern Recognition of Impact in Passenger Car Bumper Using Smart MaterialsFlexibility Analysis of the Welded Metal Bellows of Mechanical SealFully Automated Mixed Mode Crack Propagation Analyses Using VCCM (Virtual Crack Closure-Integral Method) for Tetrahedral Finite ElementCreep Deformation Characteristics of Austenitic Stainless Steel FoilsCharacterization of Shot Peened 2024-T351 Aluminum AlloyNon-Destructive Techniques (NDT) in Composite MaterialsThe Effect of Eva on Composite that Made of PP NanoclayStudy of Abrasive Wear Mechanism through Nano MachiningAnalysis of Coconut Carbon Fibers for Gas Diffusion Layer MaterialEffects of Different Die and Epoxy Thickness to the QFN PackageDurability of R/C Structures under Mechanical and Environmental ActionStudy on Complex Structure Mesh Generating of Hexahedron Element Based on Improved Waveform Mesh Generating MethodDevelopment of Universal Test Method to Evaluate the Plastic Deformation of Sheet MetalEffect of Aging Treatment on Microstructure and Mechanical Properties of Al-Si Matrix Alloy Reinforced with High Purity Aluminum Nitride (AlN)Influences of Crack Face Bridging Stress and Microstructure on Fracture Toughness of Toughened Alumina CeramicsStudy of Inner Micro Cracks on Rolling Contact Fatigue of Bearing Steels Using Ultrasonic Nano-Crystalline Surface ModificationStudy on Numerical Simulation Method of Periodic Symmetric Struts Support Coupling with Heat Flow and SolidStudy on Parametric Modeling Method for FEA Model of Periodic Symmetric Struts SupportAbrasion and Erosion-Corrosion Behavior of Al-Mn Alloy Matrix Composites Reinforced with Al2O3 ParticulatesImpacts of Process Parameters on the Substrate Distortion of PAW-Based Rapid PrototypingEffect of Mesh Size of Finite Element Analysis in Modal Analysis for Periodic Symmetric Struts SupportStudy on Dynamic Response and the Effect to Center Level Height of Periodic Symmetric Struts SupportSPH Method for Simulation of Wind-Blown Sand MovementsNew Developments in Electrochemical FinishingNumerical Study on Aeolian Sand Ripples Forming and Moving Process in Desert HighwayDynamics and Numerical Modeling of Sandy Desert Morphology Caused by Aeolian Transport of Sand ParticlesEffect of Uyghur Sand Therapy on Femur Bending Mechanical Properties in Rabbit and the Finite Element AnalysisAnalytical and Numerical Investigation of Fatigue Crack Growth in Aluminum AlloyThe Model of Specimen Transverse Inertia Influence on Testing Result of Dynamic Character of RockExtracting the Features Point Data Based on the FE and RE SoftwaresAnalysis of the Surface Integrity Machined by Short Electric Arc MachiningDynamic Analysis of Wind Turbine Blade Based on Reverse EngineeringHuman Body Tissues Model Reconstruction Based on the Reverse EngineeringPreventive Suggestion and Fault Analysis on Piston Fracture of the Methanol Fresh Air Compressor C102BMaterial Removal and Fracture Detection in Micro-EDM ProcessesSurface Hardening of Aluminium-Copper Alloy 2011 by RF Plasma Nitriding ProcessSynthesis and Structural Consideration of Metal-Organic Framework (MOF) Coordination Polymer with Various Metal Linker RatiosFracture Toughness and Fatigue Crack Growth Behavior of Rail Track MaterialVariable Amplitude Loading Strains Data Distribution Using Probability Density Function and Power Spectral DensityCritical Stress Intensity Factor Determination for AZ61 Magnesium AlloyHydro-Elastic Vibration of Partially Liquid-Filled or Partially Liquid- Surrounded Composite Cylindrical ShellsTheoretical Investigation into the Wave Propagation in Rock with Single FractureStrength Analysis for Shrink Fitting System Used for Ceramics Rolls in the Continuous Pickling LineStress Intensity Factor of a Central Interface Crack in a Bonded Strip under Arbitrary Material CombinationIdentification of Damages and Stress Analysis of Rail/Wheel Rolling Contact RegionExperimental Study on Embryo Skeletal Development to Postnatal Growth Process of Rabbit ThighboneThe Strength Evaluation and Reliability Analysis of Periodic Symmetric Struts SupportCapacity Analysis of Urban Highway IntersectionsFailure Behaviour of Semantan Bamboo Strips Loaded in Bending and ShearAnalysis of Thermo-Mechanical Stresses in Laminated Hollow Circular Cylinder with Finite LengthEffects of Different Fillers on Microstructure and Tensile Properties of Welded AA6061-T6The Study of Underfill Epoxy Hardness in Reducing Curing Process Time for Flip Chip PackagingCyclic Behavior of Electrical Resistance Type Low Stiffness, Large Strain Sensor by Using Carbon Nanofiber/Flexible Epoxy CompositeNumerical Investigation of Curing Process in Reaction Injection Molding of Rubber for Quality ImprovementsExperimental and Analytical Studies of Fatigue Crack Growth in Peened after Skimmed Friction Stir Welded Joint of 2024-T351 Al AlloyDesign Optimization of Bi-Tubular Thin Walled Columns for Crashworthiness ApplicationEffect of Cu Particles Precipitation on Wear Behaviour of Fe-3mass%Cu under Dry Sliding ConditionA Theoretical Study on the Influence of Frequency on the Dynamic Characteristics of Air FilmFluid-Structure Coupled Analysis Using Enriched Free Mesh MethodFracture Behavior of Inconel 718 at High TemperatureCorrosion Behavior of Fe-Cr Alloys in Ar-10%O2 AtmosphereCorrosion Detection in Concrete Structure Including Layered RebarCorrosion Prediction under Flow FieldOptimization of Cathodic Protection System Design for Pipe-Lines Structure with Ribbon Sacrificial Anode Using BEM and GAStress Distribution Effect on a Stacked-Die QFN Package Manufacturing ProcessesEffect of Hook Location for Ultra Fine Pitch Wirebonding Pull Testing MethodPerforated Plate Backing with Coconut Fiber as Sound Absorber for Low and Mid Range FrequenciesAsymptotic Analysis for the Singular Stress Behaviour around an Interface Edge of Dissimilar Power-Law Hardening Materials JointSimulation of Compression and Spring-Back Phenomena of Sandwich Structure with Honeycomb Core Subjected to Low Energy and Low Velocity ImpactMechanical Behaviour of Three Dimensional Lattice StructuresLow Velocity Impact Analyses of Prismatic Columns Using Finite Element MethodProbabilistic Fracture Mechanics Analysis of Multiple Cracks in Cylindrical Pressure VesselPrediction of External Stability for Geogrid-Reinforced Segmental WallsFinite Element Analysis on the Stress Intensity Factor under Combined Bending and Torsion LoadingDevelopment of Green Insulation Boards from Kenaf Fibres Part 2: Characterizations of Thermal and Water AbsorptionFatigue Crack Growth Prediction of Thick Wall Cylinder under Variable Amplitude LoadingDevelopment of Green Insulation Boards from Kenaf Fibres Part 1: Development and Characterization of Mechanical PropertiesPrediction of Residual Stress Relaxation of Shot Peened 2024-T351 Aluminum Alloy: Part 2Prediction of Residual Stress Relaxation of Shot Peened 2024-T351 Aluminum Alloy: Part 1Experiment Research for Fracture Toughness of PAN-Based Carbon FibersExperimental Study of Back Tempering Problem of Laser HardeningNumerical Study on Self-Consistency Centering Process of Periodic Symmetric Struts SupportEffects of Thermal Aging on Ductile-to-Brittle Transition Temperature Behavior of Welded A516 SteelEarthquake Damage Assessment to Entire Urban BuildingApplication of Damage Model in Stability Analysis of ShuangjiangKou Underground CavernsEffect of Aging and Protective Coating on the Corrosion Behavior of 6061 Al / SiCp Composite in Chloride SolutionsCracking Safety Evaluation of Massive Concrete StructuresDamage Mechanics Model for Solder/Intermetallics Interface Fracture Process in Solder Joints
