Sonstiges, Englisch, Band Volume 659, 652 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Sonstiges, Englisch, Band Volume 659, 652 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Applied Mechanics and Materials
ISBN: 978-3-03795-968-8
Verlag: Trans Tech Publications
The 104 papers are grouped as follows:
Chapter 1: Science of Materials and Processing Technologies,
Chapter 2: Design of Vehicles and Combustion Engines,
Chapter 3: Applied Thermodynamics and Heat Transfer, Renewable Energy, Engineering of Thermal Systems,
Chapter 4: Technologies and Machines in Agriculture and Food Processing,
Chapter 5: Applied Computational Methods in Design and Modeling,
Chapter 6: Engineering Management and Engineering Education
Autoren/Hrsg.
Weitere Infos & Material
Micro-Alloying Influence on Hot Work Tool Steel PropertiesWear Resistance and XRD Analyses of CMoCuNiCrSiBO Coatings Obtained by Thermal Deposition on OLC45 SubstrateWear Resistance and XRD Analyses of CNiCrSiBO Coatings Obtained by Thermal Deposition on OLC45 SubstrateEvaluation of Mechanical Properties of Polyester Composite with Graphene and Graphite through Three-Point Bending TestCorrosion Behaviour of a Cermet Deposited Coating in Sulfuric Acid SolutionA Study on Plastic Deformations due to Contact Fatigue Wear on a Cermet Coating Deposited by Thermal Spraying MethodsExperimental Determination of the Yield Stress for Copper, Cu_99.75Silicon Influence on the Cast Iron StructureInfluence of Cooling Rate on Metallographic Structure for Gray Iron, in the Case of Modification with a Mechanical Mixture of Al and FeSiCaMgFEM Simulation on Uniaxial Tension of Hyperelastic ElastomersMathematical Modeling of the Relationship between the Surface Roughness and the Tool-Chip Interface Temperature in TurningExperimental Studies for Reducing Flux Consumptions in Atmospheric Controlled Brazing of Aluminum AlloysComparative In Vitro Study on MgCa Si MgCaSi Alloys, as Biodegradable ImplantsWhite Cast Irons with Acoustic PropertiesInfluence of the Degree of Cold Drawing over the Wear Test and XRD Analysis of Pipes Used for DampersConsiderations Concerning the Causes and Effects of the Occurrence of Residual Stresses in Metallic Materials: A ReviewHybrid Particle/Fiber Polymer Based Composites Analysis Based on DMA Data vs. Material Property PredictionsSome Considerations Concerning the Differential Scanning Calorimetry of Ultra Tough Plastic MaterialsSurface Generation by Material Removal in Manufacturing Processes from Machine BuildingConstitutive Parameters of Mechanical Behaviour Law for Poly (Ether-Ether-Ketone) Based Composites with Carbon Nanotubes and Carbon FibresSimulating the Torque and Angular Speed Distribution within a Heavy Vehicle?s Planetary GearboxUsing Neural Networks to Modeling Vehicle DynamicsA New Electric Drive System for a Disc Brake System Used in the Vehicle, Experimental StandExperimental Study on the Influence of Certain Parameters over Vehicle?s Dynamic BehaviorVehicle Dynamics Study under UncertaintyResponse Time to Sudden Changes in Speed and Load Regimes for Turbocharged Diesel EngineAspects of Modeling and Optimizing Air Circulation Currents in a Car CabinSimulation of the Free Piston?s Movement from the Single Regime Running Thermo-Hydraulic GeneratorHuman Head-Neck System Behavior during Virtual Impact Automotive SimulationsTheoretical and Experimental Researches Regarding the Use of Butanol at Diesel EngineVirtual High Speed Diesel Engine ? A Simulated Experiment, Part I: Combustion DynamicsVirtual High Speed Diesel Engine ? A Simulated Experiment, Part II: The Influence of Polytropic Exponent upon Combustion Product FormationEffects of Temperature Distribution on Operational Parameters of a Spark Ignition EngineQualitative Estimation Criterion of Direct Injection Diesel Engines Performance Prediction for Stationary and Industrial ApplicationsExperimental and Theoretical Aspects of Fuelling a Diesel Engine with Liquefied Petroleum GasesResearches Regarding the Use of Bioethanol at the Supercharged Spark Ignition EngineSafety against Derailment for Railway VehiclesCOSRING-LUJET, Integrated New Concept in Automotive I.C. Engines for a Better LubricationResearches on the Behavior of the Supporting Structure of Railway Traction Vehicles under the Effect of Shock Dynamic ForcesAnalyzing the Static Behavior of a Bogie Frame by Comparing Two Methods of SimulationsA Theoretical Approach upon the Stiffness of Vehicle Resistance Structure Submitted to an Axial ImpactThermo-Chemical Recuperation as an Efficient Way of Engine's Waste Heat RecoveryExperimental Determination of the Cinematic Misfit within the Transmission of a 4x4 Vehicle that Leads to Self-Generated Torque along the Vehicle?s Inter-Axle DrivelineSelf-Generated Torque Induced by the Lockable and Self-Locking Differentials within the 4WD DrivetrainTheoretical and Experimental Analysis on Use of Alternative Fuels for Internal Combustion EnginesStraight Section Influence on Thermal and Hydraulic Performances for a Wavy Air Fin in a Compact Heat ExchangerCombined Cycle Units ? An Alternative to Reciprocating Engines in Terrestrial Propulsion Field - Estimation of PerformancesCombined Cycle Units for Terrestrial Propulsion - Dimensional ApproachSolid Fuels Behavior Revealed by Thermo-Gravimetric AnalysisResearch on the Processes of Gas-Air Mixtures FormationExperimental Study for Data Validation Regarding the Flow Movement in Natural Convection in an Asymmetrical Heated Vertical ChannelNumerical Study Regarding the Flow Movement in Natural Convection in an Asymmetrical Heated Vertical ChannelTheoretical and Experimental Research Regarding Operating Conditions of the Refrigeration Absorption/Adsorption Machines Using Solar EnergyThe Analysis of the Temperature Influence on the Processing Precision in Centerless Grinding MachinesWind Potential Analysis in Brasov Built EnvironmentAnalysis of the Efficiency of Ventilation Systems in Underground GaragesStudy Regarding the Wind Action on the Functioning of ChimneysA Study Regarding the Unsteady Heat Transfer and Phase ChangeThe Advanced System for Conducting the Electric Furnaces for Heat TreatmentsConsiderations about the Role and Efficiency of the Transceiver's Heat Sink during Critical SituationsActive Pulse Thermography Applied to Defect Detection in Bioceramic MaterialsGamma-Type Stirling Motor-Driven CompressorPhysico-Mathematical Model of the Theoretical Gamma-Type Stirling Motor-Driven CompressorFinite Difference Approaches for One-Dimension Solid-Liquid Phase Change in Plane and Cylindrical GeometriesRapid Control Prototyping in the Development of Home Energy Management SystemsStudy of the Heat Transfer in a Heat Exchanger with Latent Heat StorageNumerical Study of Corrugation Amplitude Influence of a Wavy Fin in Overall Performance of a Compact Heat ExchangerEstimating Heating and Cooling Degree Days through an Urban Environment Using Publicly Available SensorsImproved Heat Transfer Using Micro-Structures in Trifold Solar Energy Conversion SystemsSelf-Sustained, Independent Trifold Solar Energy Conversion System for Isolated Locations in Hot Climate AreasIntegrated System for Producing, Transporting and Consuming the Unconventional Energy for a Residential BuildingProduction of Electricity in Photovoltaic Systems for Administrative Buildings in Romania, Technical and Economic AnalysisNumerical Study of the Efficiency of Flat Plate Solar Collectors in Different External ConditionsExperimental Investigation of Waste Heat Available for a Hybrid Micro-Cogeneration Group Involving a Diesel Engine Electric Generator and Organic Rankine CycleStudy of Height Influence of Heat Exchanger Tanks on Overall Pressure DropPressure Injection Influence on the Combustion ProcessSoot and NOx ModelingConsiderations on Economic Optimization of the Relationship Insulation - Thermal Energy Sources Insurance for Civil BuildingMethodology for Analysis of Energy Efficiency for Residential Buildings Based on the Optimal CostHydrogen Production by Anaerobic Digestion of Biomass with High Lignocellulose Content - References Selection ProcedureGround Temperature Variation around the Horizontal Collectors of a Heat PumpStudy of Ground ? Water Heat Pump Parameters during 3 Years of OperationResults of the Numerical Simulation of the Entropy Flow Generated at the Fluid Flow with Friction and Heat ExchangeTheoretical Analysis of the Entropy Flow Generated by the Fluid Flow with Friction and Heat ExchangeExperimental Determination of the Heat Recovery Boiler Effectiveness of a Gas Turbine PlantInfluence of Hydrothermal Treatment on Wheat for MillingStudy on the Dynamic Interaction between Agricultural Tractor and Trailer during Braking Using Lagrange EquationStudies and Research Concerning the Displacement of Solid Particle on an Oscillatory Flat SurfaceResearches Concerning the Cutting of Strains Plant with Cutting Devices from Romanian Combine HarvestersLosses Analysis of Materials Resulted from Shredding of Food Materials with Soft Texture by Means of Metal Wire CuttingResearches Regarding the Improvement of the Design for Vineyard Spraying EquipmentResearches Regarding the Reliability of the Spraying Nozzles Used for Vineyard and Orchard SprayersNumerical Methods and Descriptive Geometry Methods for Unfoldings DeterminationGeneralization of Multispeed Gear Pitch Curves DesignTechnical Applications of the Descriptive Geometry and the Numerical MethodsNonlinear Oscillations of a Mass with Cubic Stiffness, Harmonic Excitation and Dry FrictionThe Generation of Conical Gears by a CAD SoftAn Overview on Assistive Technology Training Courses for SalespersonsNew Applications for Mechatronic Platforms in Trans and Interdisciplinary EducationAspects Concerning New Trend in Management Control Systems Design and Implementation StrategyModular Student Learning Kit for Internet of ThingsCultural Influence in Engineering Education, Business and Economics in Terms of Multinational ApproachSuccess Elements Analysis of International Engineering and Educational ProjectsPredict Air Pollution in Brasov City with Regression Models
