Buch, Englisch, 652 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1300 g
Buch, Englisch, 652 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1300 g
ISBN: 978-3-03835-272-3
Verlag: Trans Tech Publications
Autoren/Hrsg.
Weitere Infos & Material
Preface and Committees
Chapter 1: Science of Materials and Processing Technologies
Micro-Alloying Influence on Hot Work Tool Steel Properties
Wear Resistance and XRD Analyses of CMoCuNiCrSiBO Coatings Obtained by Thermal Deposition on OLC45 Substrate
Wear Resistance and XRD Analyses of CNiCrSiBO Coatings Obtained by Thermal Deposition on OLC45 Substrate
Evaluation of Mechanical Properties of Polyester Composite with Graphene and Graphite through Three-Point Bending Test
Corrosion Behaviour of a Cermet Deposited Coating in Sulfuric Acid Solution
A Study on Plastic Deformations due to Contact Fatigue Wear on a Cermet Coating Deposited by Thermal Spraying Methods
Experimental Determination of the Yield Stress for Copper, Cu_99.75
Silicon Influence on the Cast Iron Structure
Influence of Cooling Rate on Metallographic Structure for Gray Iron, in the Case of Modification with a Mechanical Mixture of Al and FeSiCaMg
FEM Simulation on Uniaxial Tension of Hyperelastic Elastomers
Mathematical Modeling of the Relationship between the Surface Roughness and the Tool-Chip Interface Temperature in Turning
Experimental Studies for Reducing Flux Consumptions in Atmospheric Controlled Brazing of Aluminum Alloys
Comparative In Vitro Study on MgCa Si MgCaSi Alloys, as Biodegradable Implants
White Cast Irons with Acoustic Properties
Influence of the Degree of Cold Drawing over the Wear Test and XRD Analysis of Pipes Used for Dampers
Considerations Concerning the Causes and Effects of the Occurrence of Residual Stresses in Metallic Materials: A Review
Hybrid Particle/Fiber Polymer Based Composites Analysis Based on DMA Data vs. Material Property Predictions
Some Considerations Concerning the Differential Scanning Calorimetry of Ultra Tough Plastic Materials
Surface Generation by Material Removal in Manufacturing Processes from Machine Building
Constitutive Parameters of Mechanical Behaviour Law for Poly (Ether-Ether-Ketone) Based Composites with Carbon Nanotubes and Carbon Fibres
Chapter 2: Design of Vehicles and Combustion Engines
Simulating the Torque and Angular Speed Distribution within a Heavy Vehicle’s Planetary Gearbox
Using Neural Networks to Modeling Vehicle Dynamics
A New Electric Drive System for a Disc Brake System Used in the Vehicle, Experimental Stand
Experimental Study on the Influence of Certain Parameters over Vehicle’s Dynamic Behavior
Vehicle Dynamics Study under Uncertainty
Response Time to Sudden Changes in Speed and Load Regimes for Turbocharged Diesel Engine
Aspects of Modeling and Optimizing Air Circulation Currents in a Car Cabin
Simulation of the Free Piston’s Movement from the Single Regime Running Thermo-Hydraulic Generator
Human Head-Neck System Behavior during Virtual Impact Automotive Simulations
Theoretical and Experimental Researches Regarding the Use of Butanol at Diesel Engine
Virtual High Speed Diesel Engine – A Simulated Experiment, Part I: Combustion Dynamics
Virtual High Speed Diesel Engine – A Simulated Experiment, Part II: The Influence of Polytropic Exponent upon Combustion Product Formation
Effects of Temperature Distribution on Operational Parameters of a Spark Ignition Engine
Qualitative Estimation Criterion of Direct Injection Diesel Engines Performance Prediction for Stationary and Industrial Applications
Experimental and Theoretical Aspects of Fuelling a Diesel Engine with Liquefied Petroleum Gases
Researches Regarding the Use of Bioethanol at the Supercharged Spark Ignition Engine
Safety against Derailment for Railway Vehicles
COSRING-LUJET, Integrated New Concept in Automotive I.C. Engines for a Better Lubrication
Researches on the Behavior of the Supporting Structure of Railway Traction Vehicles under the Effect of Shock Dynamic Forces
Analyzing the Static Behavior of a Bogie Frame by Comparing Two Methods of Simulations
A Theoretical Approach upon the Stiffness of Vehicle Resistance Structure Submitted to an Axial Impact
Thermo-Chemical Recuperation as an Efficient Way of Engine's Waste Heat Recovery
Experimental Determination of the Cinematic Misfit within the Transmission of a 4x4 Vehicle that Leads to Self-Generated Torque along the Vehicle’s Inter-Axle Driveline
Self-Generated Torque Induced by the Lockable and Self-Locking Differentials within the 4WD Drivetrain
Theoretical and Experimental Analysis on Use of Alternative Fuels for Internal Combustion Engines
Chapter 3: Applied Thermodynamics and Heat Transfer, Renewable Energy, Engineering of Thermal Systems
Straight Section Influence on Thermal and Hydraulic Performances for a Wavy Air Fin in a Compact Heat Exchanger
Combined Cycle Units – An Alternative to Reciprocating Engines in Terrestrial Propulsion Field - Estimation of Performances
Combined Cycle Units for Terrestrial Propulsion - Dimensional Approach
Solid Fuels Behavior Revealed by Thermo-Gravimetric Analysis
Research on the Processes of Gas-Air Mixtures Formation
Experimental Study for Data Validation Regarding the Flow Movement in Natural Convection in an Asymmetrical Heated Vertical Channel
Numerical Study Regarding the Flow Movement in Natural Convection in an Asymmetrical Heated Vertical Channel
Theoretical and Experimental Research Regarding Operating Conditions of the Refrigeration Absorption/Adsorption Machines Using Solar Energy
The Analysis of the Temperature Influence on the Processing Precision in Centerless Grinding Machines
Wind Potential Analysis in Brasov Built Environment
Analysis of the Efficiency of Ventilation Systems in Underground Garages
Study Regarding the Wind Action on the Functioning of Chimneys
A Study Regarding the Unsteady Heat Transfer and Phase Change
The Advanced System for Conducting the Electric Furnaces for Heat Treatments
Considerations about the Role and Efficiency of the Transceiver's Heat Sink during Critical Situations
Active Pulse Thermography Applied to Defect Detection in Bioceramic Materials
Gamma-Type Stirling Motor-Driven Compressor
Physico-Mathematical Model of the Theoretical Gamma-Type Stirling Motor-Driven Compressor
Finite Difference Approaches for One-Dimension Solid-Liquid Phase Change in Plane and Cylindrical Geometries
Rapid Control Prototyping in the Development of Home Energy Management Systems
Study of the Heat Transfer in a Heat Exchanger with Latent Heat Storage
Numerical Study of Corrugation Amplitude Influence of a Wavy Fin in Overall Performance of a Compact Heat Exchanger
Estimating Heating and Cooling Degree Days through an Urban Environment Using Publicly Available Sensors
Improved Heat Transfer Using Micro-Structures in Trifold Solar Energy Conversion Systems
Self-Sustained, Independent Trifold Solar Energy Conversion System for Isolated Locations in Hot Climate Areas
Integrated System for Producing, Transporting and Consuming the Unconventional Energy for a Residential Building
Production of Electricity in Photovoltaic Systems for Administrative Buildings in Romania, Technical and Economic Analysis
Numerical Study of the Efficiency of Flat Plate Solar Collectors in Different External Conditions
Experimental Investigation of Waste Heat Available for a Hybrid Micro-Cogeneration Group Involving a Diesel Engine Electric Generator and Organic Rankine Cycle
Study of Height Influence of Heat Exchanger Tanks on Overall Pressure Drop
Pressure Injection Influence on the Combustion Process
Soot and NOx Modeling
Considerations on Economic Optimization of the Relationship Insulation - Thermal Energy Sources Insurance for Civil Building
Methodology for Analysis of Energy Efficiency for Residential Buildings Based on the Optimal Cost
Hydrogen Production by Anaerobic Digestion of Biomass with High Lignocellulose Content - References Selection Procedure
Ground Temperature Variation around the Horizontal Collectors of a Heat Pump
Study of Ground – Water Heat Pump Parameters during 3 Years of Operation
Results of the Numerical Simulation of the Entropy Flow Generated at the Fluid Flow with Friction and Heat Exchange
Theoretical Analysis of the Entropy Flow Generated by the Fluid Flow with Friction and Heat Exchange
Experimental Determination of the Heat Recovery Boiler Effectiveness of a Gas Turbine Plant
Chapter 4: Technologies and Machines in Agriculture and Food Processing
Influence of Hydrothermal Treatment on Wheat for Milling
Study on the Dynamic Interaction between Agricultural Tractor and Trailer during Braking Using Lagrange Equation
Studies and Research Concerning the Displacement of Solid Particle on an Oscillatory Flat Surface
Researches Concerning the Cutting of Strains Plant with Cutting Devices from Romanian Combine Harvesters
Losses Analysis of Materials Resulted from Shredding of Food Materials with Soft Texture by Means of Metal Wire Cutting
Researches Regarding the Improvement of the Design for Vineyard Spraying Equipment
Researches Regarding the Reliability of the Spraying Nozzles Used for Vineyard and Orchard Sprayers
Chapter 5: Applied Computational Methods in Design and Modeling
Numerical Methods and Descriptive Geometry Methods for Unfoldings Determination
Generalization of Multispeed Gear Pitch Curves Design
Technical Applications of the Descriptive Geometry and the Numerical Methods
Nonlinear Oscillations of a Mass with Cubic Stiffness, Harmonic Excitation and Dry Friction
The Generation of Conical Gears by a CAD Soft
Chapter 6: Engineering Management and Engineering Education
An Overview on Assistive Technology Training Courses for Salespersons
New Applications for Mechatronic Platforms in Trans and Interdisciplinary Education
Aspects Concerning New Trend in Management Control Systems Design and Implementation Strategy
Modular Student Learning Kit for Internet of Things
Cultural Influence in Engineering Education, Business and Economics in Terms of Multinational Approach
Success Elements Analysis of International Engineering and Educational Projects
Predict Air Pollution in Brasov City with Regression Models
