Goto / Fu / Zhang | Materials Integration | Buch | 978-3-03785-376-4 | sack.de

Buch, Englisch, 390 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 900 g

Goto / Fu / Zhang

Materials Integration

Buch, Englisch, 390 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 900 g

ISBN: 978-3-03785-376-4
Verlag: Trans Tech Publications


This special volume on Materials Integration is based upon peer-reviewed papers selected from those presented at the International Symposium on the Global COE program, in conjunction with the 2nd International Symposium on Advanced Synthesis and Processing Technology for Materials (ASPT2011) and the 8th Materials Science School for Young Scientists, Institute for Materials Research, Tohoku University (Kinken-Wakate 2011). Volume is indexed by Thomson Reuters CPCI-S (WoS).This volume covered the principal research fields of (i) Infrastructural and Bio- materials, (ii) Electronic materials, (iii) Energy and Environmental materials and (iv) Basic materials science. Materials integration is expected to produce a synergistic effect and permit the development and production of non-conventional materials exhibiting new functionalities.
Goto / Fu / Zhang Materials Integration jetzt bestellen!

Weitere Infos & Material


Preface and Organizing Committees
I. Infrastructural and Bio-Materials
Effect of Precursor Supply on (100) and (001) Orientations of a-Al2O3 Film Prepared by Laser CVD
Thin-Film Compositions on Base of Hafnium Dioxide and Aluminum Oxide: Synthesis and Characterization
Preparation of SiNOf/BN High Temperature Wave-Transparent Composites by Precursor Infiltration and Pyrolysis Method
Preparation of SiAlON-cBN Composites Using Ni Nanoparticle Precipitated cBN Powders
Thermal Conductivity Design and Evaluation of Zirconium Phosphate Bonded Silicon Nitride Porous Ceramics
Preparation of Nano-Sized ZrO2 Powders by Polyvinyl Alcohol-Gel Method
Effect of Heating Rate on the Synthesis and Sintering of Ternary Carbide Zr2Al3C4 through Spark Plasma Sintering
Densification and Microstructure of Monolithic TiN and TiB2 Fabricated by Spark Plasma Sintering
Thermo-Mechanical Analysis of Si3N4-Based Seal Coatings on Si3N4 Substrate
Interface Reaction Behavior between Mn and SiO2 Formed by RF Sputter Deposition
Phase Transformation and Densification of hBN-TiN Composites Fabrication by Spark Plasma Sintering
Formation of Mo2S3 Layers on the Surface of Graphitic Platelets
Foaming of CNTs/PMMA Nanocomposite with Supercritical Carbon Dioxide
Silicon Carbide Coating on Diamond Powder by Rotary Chemical Vapor Deposition
Mechanical Properties of Silicon Nitride Porous Ceramics with Bimodal Porosity
Carbon Nanomaterials for Drug Delivery
Investigation of a Tb-Doped HfO2 Single Crystal Grown by a Skull Melting Method
Surface Modification of Micro/Nano-Fabricated Filters
New Fe-B-P-Cu Nanocrystalline Soft Magnetic Alloys with High Js Combined with Low Coercivity Hc
Evaluation of Texture Developed in High-Temperature ß-Phase during Friction Stir Welding of Ti-6Al-4V
The Effect of Co Addition on Glassy Forming Ability and Soft Magnetic Properties of Fe-Si-B-P Bulk Metallic Glass
Young's Modulus Changeable ß-Type Binary Ti-Cr Alloys for Spinal Fixation Applications
Continuous Dynamic Recrystallization during Warm Deformation of Tempered Lath Martensite in a Medium Carbon Steel
Effect of Phosphorus on Microstructure, Mechanical Properties, and Formation of Retained Austenite in TRIP Steels
Fabrication of Nanocrystalline Fe84.3Si4B8P3Cu0.7 Powders with High Magnetization
Dynamic Strain Aging in Biomedical Co–Cr–Mo-Based Alloys with Nitrogen Doping
Local Atomic Arrangement of Amorphous Zr50Ni50 Alloy Analyzed by AXS-RMC Method
Microstructure and Mechanical Properties of a Biomedical ß-Type Titanium Alloy Subjected to Severe Plastic Deformation after Aging Treatment
Difference of Microstructure and Fatigue Properties between Forged and Rolled Ti-6Al-4V
Microstructural Change of ß' Phase and Hardness Change in As-Solutionized Dental Ag-20Pd-12Au-14.5Cu Alloy
Effect of Microalloying Elements on Solidification Microstructure of the La(Fe0.89Si0.11)13 Alloy
Study on Microstructure and Property of Diffusion-Bonded Mo-Cu Joints
II. Electronics Materials
Growth of b-Axis-Oriented BaTi2O5 Nanopillars by Laser Chemical Vapor Deposition
Deposition of BaTi2O5 Films on Si Substrates by Using MgO Buffers
Effect of Nitridation on Indium-Composition of InGaN Films
Ba2TiO4 and Ba4Ti13O30 Thick Films Prepared by Laser Chemical Vapor Deposition and their Microstructure
Search for New Superconductors by Soft-Chemical Techniques
Preparation of c-Axis-Oriented Y2Ba4Cu7O15-d Films by Laser CVD with Ultrasonically Nebulized Precursor
Effect of Sb2O3 Doping Ratio on Electrical and Optical Properties of ATO Films by Pulsed Laser Deposition
Comprehensive Approach for the Construction of New Material for Electronic Multipliers
Growth of Heavily Indium Doped Si Crystals by Co-Doping of Neutral Impurity Carbon or Germanium
Nd3+ Doped LiCaAIF6 Single Crystal for Scintillator Application
Densification of ATO Nanoceramics by Spark Plasma Sintering
Optical and Scintillation Properties of Eu-Doped Calcium Orthoborate
Crystal Growth and Scintillation Properties of Ce3+ and Mg2+ Co-Doped LiCaAlF6 Single Crystal
Study on Phase Diagram of Ca3NbGa3Si2O14 Piezoelectric Material by Differential Thermal Analysis and X-Ray Diffraction Measurement
Preparation of Bi3.6Ho0.4Ti3O12 Ceramics by Hot-Press Sintering
Proton Dynamics in Water Nanotube of New Molecular Porous Crystal
Ferromagnetic Resonance Study on FePt Thin Films with In-Plane Magnetization Using Coplanar Waveguide
Spin Pumping in a Ferromagnetic/Nonmagnetic/Spin-Sink Trilayer Film: Spin Current Termination
Studies on Properties of Epoxy Resin Base Piezoelectricity Damping Carbon Fiber Composite Materials
III. Energy and Environmental Materials
Preparation of Titania Solid Films by Laser CVD Using CO2 Laser
Physical Properties of the SiCxNyHz Films
Microcolumnar and Granular Structures of TiO2 Films Prepared by Laser CVD Using Nd:YAG Laser
Ionic Conductivity and Crystal Structure of TM-Doped Mg0.5Ti2(PO4)3 (TM = Fe, Mn, Co and Nb)
Orientation and Morphology of LiCoO2 Prepared by Chemical Vapor Deposition on Al2O3 Single Crystal
Environmental Structural Analysis of Raney Ru(Ni) Fine Particles
Synthesis and Structural Investigation of Metal Hydride, Y(Mn1-xFex)2Hy (x = 0.3, 4.0 = y = 4.5) and Complex Hydride, Y(Mn1-xFex)2H6
Charging and Discharging Phenomena in Organic Photoconductors Observed Using Electron Holography
IV. Basic Materials Science
Tantalum Vacancy Effects on Electrical Conductivity of La3Ta0.5Ga5.5O14 and Ba-Based P321 Crystals
Emission Characteristics of Copper Ionic Lines from the 3d95s-3d94p Transition in a Low-Pressure Laser-Induced Plasma
Optical Conductivity of Rattling Phonons in Type-I Clathrates Ba8Ga16Ge30 and Ba8Ga16Sn30
Suppression of Spin Pumping in the Presence of Thin Titanium Interlayer
Features of the Mackay Clusters with and without a Center Atom in Al Based Approximants of Icosahedral Quasicrystals
Dislocation Dynamics in Bending Deformation of Si
Computer Simulation Model for Multi-Size Spherical Particles Reinforced Composite Materials


Ihre Fragen, Wünsche oder Anmerkungen
Vorname*
Nachname*
Ihre E-Mail-Adresse*
Kundennr.
Ihre Nachricht*
Lediglich mit * gekennzeichnete Felder sind Pflichtfelder.
Wenn Sie die im Kontaktformular eingegebenen Daten durch Klick auf den nachfolgenden Button übersenden, erklären Sie sich damit einverstanden, dass wir Ihr Angaben für die Beantwortung Ihrer Anfrage verwenden. Selbstverständlich werden Ihre Daten vertraulich behandelt und nicht an Dritte weitergegeben. Sie können der Verwendung Ihrer Daten jederzeit widersprechen. Das Datenhandling bei Sack Fachmedien erklären wir Ihnen in unserer Datenschutzerklärung.