Goto / Fu / Zhang | Materials Integration | Sonstiges | 978-3-03795-199-6 | sack.de

Sonstiges, Englisch, Band Volume 508, 390 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g

Reihe: Key Engineering Materials

Goto / Fu / Zhang

Materials Integration

Sonstiges, Englisch, Band Volume 508, 390 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g

Reihe: Key Engineering Materials

ISBN: 978-3-03795-199-6
Verlag: Trans Tech Publications


This special volume on Materials Integration is based upon peer-reviewed papers selected from those presented at the International Symposium on the Global COE program, in conjunction with the 2nd International Symposium on Advanced Synthesis and Processing Technology for Materials (ASPT2011) and the 8th Materials Science School for Young Scientists, Institute for Materials Research, Tohoku University (Kinken-Wakate 2011).
Volume is indexed by Thomson Reuters CPCI-S (WoS).
This volume covered the principal research fields of (i) Infrastructural and Bio- materials, (ii) Electronic materials, (iii) Energy and Environmental materials and (iv) Basic materials science. Materials integration is expected to produce a synergistic effect and permit the development and production of non-conventional materials exhibiting new functionalities.
Goto / Fu / Zhang Materials Integration jetzt bestellen!

Weitere Infos & Material


Effect of Precursor Supply on (100) and (001) Orientations of a-Al2O3 Film Prepared by Laser CVDThin-Film Compositions on Base of Hafnium Dioxide and Aluminum Oxide: Synthesis and CharacterizationPreparation of SiNOf/BN High Temperature Wave-Transparent Composites by Precursor Infiltration and Pyrolysis MethodPreparation of SiAlON-cBN Composites Using Ni Nanoparticle Precipitated cBN PowdersThermal Conductivity Design and Evaluation of Zirconium Phosphate Bonded Silicon Nitride Porous CeramicsPreparation of Nano-Sized ZrO2 Powders by Polyvinyl Alcohol-Gel MethodEffect of Heating Rate on the Synthesis and Sintering of Ternary Carbide Zr2Al3C4 through Spark Plasma SinteringDensification and Microstructure of Monolithic TiN and TiB2 Fabricated by Spark Plasma SinteringThermo-Mechanical Analysis of Si3N4-Based Seal Coatings on Si3N4 SubstrateInterface Reaction Behavior between Mn and SiO2 Formed by RF Sputter DepositionPhase Transformation and Densification of hBN-TiN Composites Fabrication by Spark Plasma SinteringFormation of Mo2S3 Layers on the Surface of Graphitic PlateletsFoaming of CNTs/PMMA Nanocomposite with Supercritical Carbon DioxideSilicon Carbide Coating on Diamond Powder by Rotary Chemical Vapor DepositionMechanical Properties of Silicon Nitride Porous Ceramics with Bimodal PorosityCarbon Nanomaterials for Drug DeliveryInvestigation of a Tb-Doped HfO2 Single Crystal Grown by a Skull Melting MethodSurface Modification of Micro/Nano-Fabricated FiltersNew Fe-B-P-Cu Nanocrystalline Soft Magnetic Alloys with High Js Combined with Low Coercivity HcEvaluation of Texture Developed in High-Temperature ?-Phase during Friction Stir Welding of Ti-6Al-4VThe Effect of Co Addition on Glassy Forming Ability and Soft Magnetic Properties of Fe-Si-B-P Bulk Metallic GlassYoung's Modulus Changeable ?-Type Binary Ti-Cr Alloys for Spinal Fixation ApplicationsContinuous Dynamic Recrystallization during Warm Deformation of Tempered Lath Martensite in a Medium Carbon SteelEffect of Phosphorus on Microstructure, Mechanical Properties, and Formation of Retained Austenite in TRIP SteelsFabrication of Nanocrystalline Fe84.3Si4B8P3Cu0.7 Powders with High MagnetizationDynamic Strain Aging in Biomedical Co?Cr?Mo-Based Alloys with Nitrogen DopingLocal Atomic Arrangement of Amorphous Zr50Ni50 Alloy Analyzed by AXS-RMC MethodMicrostructure and Mechanical Properties of a Biomedical ?-Type Titanium Alloy Subjected to Severe Plastic Deformation after Aging TreatmentDifference of Microstructure and Fatigue Properties between Forged and Rolled Ti-6Al-4VMicrostructural Change of ?' Phase and Hardness Change in As-Solutionized Dental Ag-20Pd-12Au-14.5Cu AlloyEffect of Microalloying Elements on Solidification Microstructure of the La(Fe0.89Si0.11)13 AlloyStudy on Microstructure and Property of Diffusion-Bonded Mo-Cu JointsGrowth of b-Axis-Oriented BaTi2O5 Nanopillars by Laser Chemical Vapor DepositionDeposition of BaTi2O5 Films on Si Substrates by Using MgO BuffersEffect of Nitridation on Indium-Composition of InGaN FilmsBa2TiO4 and Ba4Ti13O30 Thick Films Prepared by Laser Chemical Vapor Deposition and their MicrostructureSearch for New Superconductors by Soft-Chemical TechniquesPreparation of c-Axis-Oriented Y2Ba4Cu7O15-d Films by Laser CVD with Ultrasonically Nebulized PrecursorEffect of Sb2O3 Doping Ratio on Electrical and Optical Properties of ATO Films by Pulsed Laser DepositionComprehensive Approach for the Construction of New Material for Electronic MultipliersGrowth of Heavily Indium Doped Si Crystals by Co-Doping of Neutral Impurity Carbon or GermaniumNd3+ Doped LiCaAIF6 Single Crystal for Scintillator ApplicationDensification of ATO Nanoceramics by Spark Plasma SinteringOptical and Scintillation Properties of Eu-Doped Calcium OrthoborateCrystal Growth and Scintillation Properties of Ce3+ and Mg2+ Co-Doped LiCaAlF6 Single CrystalStudy on Phase Diagram of Ca3NbGa3Si2O14 Piezoelectric Material by Differential Thermal Analysis and X-Ray Diffraction MeasurementPreparation of Bi3.6Ho0.4Ti3O12 Ceramics by Hot-Press SinteringProton Dynamics in Water Nanotube of New Molecular Porous CrystalFerromagnetic Resonance Study on FePt Thin Films with In-Plane Magnetization Using Coplanar WaveguideSpin Pumping in a Ferromagnetic/Nonmagnetic/Spin-Sink Trilayer Film: Spin Current TerminationStudies on Properties of Epoxy Resin Base Piezoelectricity Damping Carbon Fiber Composite MaterialsPreparation of Titania Solid Films by Laser CVD Using CO2 LaserPhysical Properties of the SiCxNyHz FilmsMicrocolumnar and Granular Structures of TiO2 Films Prepared by Laser CVD Using Nd:YAG LaserIonic Conductivity and Crystal Structure of TM-Doped Mg0.5Ti2(PO4)3 (TM = Fe, Mn, Co and Nb)Orientation and Morphology of LiCoO2 Prepared by Chemical Vapor Deposition on Al2O3 Single CrystalEnvironmental Structural Analysis of Raney Ru(Ni) Fine ParticlesSynthesis and Structural Investigation of Metal Hydride, Y(Mn1-xFex)2Hy (x = 0.3, 4.0 = y = 4.5) and Complex Hydride, Y(Mn1-xFex)2H6Charging and Discharging Phenomena in Organic Photoconductors Observed Using Electron HolographyTantalum Vacancy Effects on Electrical Conductivity of La3Ta0.5Ga5.5O14 and Ba-Based P321 CrystalsEmission Characteristics of Copper Ionic Lines from the 3d95s-3d94p Transition in a Low-Pressure Laser-Induced PlasmaOptical Conductivity of Rattling Phonons in Type-I Clathrates Ba8Ga16Ge30 and Ba8Ga16Sn30Suppression of Spin Pumping in the Presence of Thin Titanium InterlayerFeatures of the Mackay Clusters with and without a Center Atom in Al Based Approximants of Icosahedral QuasicrystalsDislocation Dynamics in Bending Deformation of SiComputer Simulation Model for Multi-Size Spherical Particles Reinforced Composite Materials


Ihre Fragen, Wünsche oder Anmerkungen
Vorname*
Nachname*
Ihre E-Mail-Adresse*
Kundennr.
Ihre Nachricht*
Lediglich mit * gekennzeichnete Felder sind Pflichtfelder.
Wenn Sie die im Kontaktformular eingegebenen Daten durch Klick auf den nachfolgenden Button übersenden, erklären Sie sich damit einverstanden, dass wir Ihr Angaben für die Beantwortung Ihrer Anfrage verwenden. Selbstverständlich werden Ihre Daten vertraulich behandelt und nicht an Dritte weitergegeben. Sie können der Verwendung Ihrer Daten jederzeit widersprechen. Das Datenhandling bei Sack Fachmedien erklären wir Ihnen in unserer Datenschutzerklärung.