Buch, Englisch, 1064 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1910 g
Buch, Englisch, 1064 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1910 g
ISBN: 978-3-03835-532-8
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preface, Committees, Sponsors
Chapter 1: Ceramic Materials in Mechanical Engineering
Pure and Doped SrTiO3 Powders Obtained by Ultrasonic Synthesis
Effect of Strontium Doping on the Structural, Morphological, and Dielectric Properties of PZT Ceramics
Study on the Piezoelectric Behavior and Structural Changes of Strontium Doped PZT Ceramics
Structural and Microstructural Properties of Si-C and Si-C-B Powders Obtained by High-Energy Ball Milling
Use of Statistical Techniques in the Optimization of the Process "Starch Consolidation"
Nondestructive Analysis of Bi2212 Bulk Superconducting Ceramics in the C-Axis Direction
Synthesis, Characterization and Photoluminescent Properties of ZrO2 Nanocrystals
Obtaining of Ceramic Sensor Devices for Soil Humidity Measurements in Different Climatic Conditions
Comparative Analysis of Fracture Toughness Obtained by Different Techniques in Alumina Matrix - Dispersed TZP Zirconia Composites
Harder and Denser AlN-TiB2 Ceramic Composites Processed by Spark Plasma Sintering
Effect of Boron and Carbon Addition on the Phase Transformations during High-Energy Ball Milling and Subsequent Sintering of Si3N4+B and Si3N4+C Powder Mixtures
Fracture Stress Analysis in Ceramic Composites of Alumina Matrix with Zirconia 3Y-TZP Nanograins for Mechanical Shielding of Satellites
Synthesis and Sintering of LaCo1-XFexO3 Ceramics: Microstructure Analysis
Thermal Characterization of Neodymium-Barium-Copper Ceramic (NBCo Ceramic) Synthesized from Barium Carbonate
Ga2O3-Doped ZnO-Nb2O5-TiO2 Dielectric Resonators for Terrestrial and Space Telecommunications Applications
Rheological Behavior of Paraffin-Alumina Emulsions and their Microstructural Effects
Chapter 2: Building Materials and Ceramics for Construction
Evaluation of Sample Preparation Parameters in the Compressive Strength of Cementitious Composites
A Study of the Mechanical Behavior of Concrete Using Additive and Waste Tires Rubber through a Diametral Compression Test Using Digital Image Correlation
Determining the Content of Toxic Substances in Panels from Pruning Acacia mangium Willd
Hydration and Dehydration of High Initial Strength Portland Cement Type CP V - ARI
A Study of the Chemical and Physical Characteristics of the Soils from the South of Piauí for Soil-Cement Brick Production
Moisture Expansion during the Formation of Crystalline Phases in Clay/CaCO3 Mixtures
Evaluation of a Tacking Stage for Adherence, between Mortar and Ceramic Brick
Factorial Design for 32 Experimental Planning of Clay Ceramic Incorporated with Ornamental Stone Waste
Influence of Weather Exposure on Dimensional Changes in Clay Ceramics Incorporated with Granite Residue
Production Speed and its Influence on Hue Variation on Tiles Decoration Based on Silicon Cylinder Technique Laser Engraving Method
Influence of Reburning on the Pozolanicity of Sugar-Cane Bagasse Ashes with Different Characteristics
Chapter 3: Main and Recycled Materials for Ceramics Production
Utilization of Foundry Waste to Produce Ceramic Matrix Composites
Purification Route of Pyrite from Coal Mining
Microstructural Characterization of Ornamental Rock Samples: Cariri Rocks
Recycled Alumina Production from the Anodizing Industry to Tubulation Coating of Petroleum Craking
Synthesis of Ceramic Pigment Based on Crystal Structure of Wollastonite
Organofunctionalization of Natural Palygorskite with Ethylene Sulfide in the Absence of a Solvent
Evaluation of the Potential of Using Quartzite Residue in Mass for the Production of Sanitary Ware
The Use of Dust Emission from Foundry Industry as Raw Material to the Industry of Ceramic Coating
Chemical-Mineralogical and Microscopic Characterization of Clay Used as Raw Materials in Santa Gertrudes' Ceramic Pole
Beneficiation of Kaolins by Hydrocycloning
Chapter 4: Composites and Polymers - Properties and Technologies
Dynamic-Mechanical Performance of Sponge Gourd Fiber Reinforced Polyester Composites
Comparison between Rice Husk Ash and Commercial Silica as Filler in Polymeric Composites
Mechanical Analysis of Polybenzoxazine Matrix in Fiber Metal Laminates
Tensile Behavior of Epoxy Composites Reinforced with Thinner Fibers of Sugarcane Bagasse
Charpy Toughness Behavior of Eucalyptus Fiber Reinforced Polyester Matrix Composites
Chemical Treatment and Characterization of Fiber of Babassu Coconut Epicarp (Orbignya phalerata) for Application in Polymeric Composite
Composites Based on Thermoset Resin and Orbignya phalerata (Babassu Coconut): Evaluation of Mechanical Properties, Morphology and Water Sorption
Bending Mechanical Behavior of Epoxy Matrix Reinforced with Buriti Fiber
Tensile Behavior of Epoxy Composites Reinforced with Thinner Sisal Fibers
Under Pressure Processed Polyester Composites with High Amount of Curaua Fibers for Improved Tensile Properties
Carnauba and Rhea Americana Eggshell Powder Incorporation in PHB Bionanocomposites
Evaluation of Biodegradability of a Compost Obtained from Polymeric Composite Reinforced Natural Fibers
Differential Scanning Calorimetry Tests of Epoxy and Polyester Composites Reinforced with Giant Bamboo Fibers
Development of Ni/h-BN Self-Lubricating Composite Powder by High-Energy Ball Milling
Characterization by Fourier Transform Infrared (FTIR) Analysis for Natural Jute Fiber
Study of the Degradability of PA6/Organoclay Nanocomposites
Effect of Molecular Weight of Polyamide 6 in Rheological Properties of Nanocomposites with Brazilian Organoclay
Evaluation of Biodegradation of PHB/PP-G-MA/Vermiculite Bionanocomposites
Characterization of Bionanocomposites PHB, PEG and Organophilic Clay
Evaluation of Current in Composites PVAL/Ceramics for Detection of Leakage Current Generated in Electrical Insulators
Effects of 3-APTMS-Modified Nano-SiO2 on the Mechanical Properties and Crystallization Behavior of Polyamide-6
Stress Cracking Analysis on Automotive Tubes Made with Polyamide 12
Mechanical Properties of Natural Fibers Reinforced Polymer Composites: Palm/Low Density Polyethylene
Characterization of Epoxy Matrix Reinforced with Banana Fibers Thermal Properties by Photoacoustic Technique
Preparation and Characterization of Composites Obtained of Polymeric Waste Coming from Boards Electronic Equipment
Effect of Hydrolytic Degradation on Mechanical Properties of PCL
Changes in Molecular Weight of Poly(Styrenesulfonate) Initiated by Thioxanthone: Photolysis and Photo-Oxidation
Processing of Pet-Silver Nanocomposite Filaments
Study of Damage in the Medium Density Polyethylene Using Digital Image Correlation
Tensile Test of High Strength Thinner Curaua Fiber Reinforced Polyester Matrix Composite
Influence of Graphite Powder and Carbon Black Weight Percentages on the Electrical Properties of Epoxy Composite Plates
Pullout Tests Behavior of Polyester Matrix Reinforced with Malva Fiber
Correlation between the Density and the Diameter of Fique Fibers
Density Weibull Analysis of Pineapple Leaf Fibers (PALF) with Different Diameters
Fabrication of Polypyrrole Nanoparticles Using Microemulsion Polymerization for Diferent Py/APS/SDS Molar Ratios
Effect of the Fiber Equivalent Diameter on the Elastic Modulus of Eucalyptus Fibers
Chapter 5: Steel, Alloys and Special Metals - Properties, Technologies of Production and Processing
Influence of Martensitic Transformation on the Fatigue of Low Temperature Metastable Stainless Steel
Evaluation of Martensite Fraction in 1026 Steel by Infrared Thermography Combined with the Koistinen-Marburger Model
Application of Computational Thermodynamics to the Evolution of Surface Tension and Gibbs-Thomson Coefficient during Multicomponent Aluminum Alloy Solidification
Formation of Ni3Ta, Ni2Ta and NiTa by High-Energy Ball Milling and Subsequent Heat Treatment
Analysis of the Microstructural Evolution during the Transient Upward, Downward and Horizontal Directional Solidification of the Al-1.2wt%Pb Monotectic Alloy
Static Aging Behavior of Microalloyed Wire Steel and Carbon Wire Steel
Friction Stir Welding of Aluminium Alloy Sheets
Manufacturing and Characterization of AA1100 Aluminum Alloy Metal Matrix Composites Reinforced by Silicon Carbide and Alumina Processed by Powder Metallurgy
Thermal Parameters, Tertiary Dendritic Growth and Microhardness of Directionally Solidified Al-3wt%Cu Alloy
Pulsed Nd:YAG Laser Welding of UNS S 32205 Duplex Stainless Steel
Crystallization of Amorphous Cu49.7Ti31.8Zr11.3Ni7.2 Alloy
Effect of Corrosion of Stainless Steel Welded within Lithium Chloride
Influence of Heat Treatment on Martensitic Transformations in Copper-Based Alloys with Shape Memory Effect
Microstructural Characterization of Joints of Maraging 300 Steel Welded by Laser and Subjected to Plasma Nitriding Treatment
Sintered Nickel Casing for Irradiation Targets
Strain-Induced Martensite Formation of AISI 304L Steel Sheet: Experiments and Modeling
Mechanical Behavior and Structural Analysis of a TiNi Alloy Annealled in the 300 to 500°C Range and Air Cooled
Study of Fatigue in AISI 4340 Steel with Different Microstructural Conditions, Submitted to a Surface Treatment of Shot Peening
The Effect of Phase Transformation on the Tensile Fracture of Austenitic Stainless Steel
Evaluation of Cracking Susceptibility of Weldment Container for Nuclear Power Plant
Fracture Behavior of 316 Stainless Steel under Creep at 600 and 800°C
Study of Aluminum Alloy 7050 T7451 Isotropic Hardening
Elasto-Plastic Modeling of the Limit Strains in Metallic Sheets
Work Hardening and Microstructural Effect during Dynamic Deformation of Polycrystalline Copper
Special Effects in Deformation Mechanism Maps for Austenitic Stainless Steels
Kinetic Study on Martensite Formation in Steels 1045 and 4340 under Variable Cooling Rates
Characterization of Residual Stresses and Microstructural by Technique of Magnetic Barkhausen Noise of API 5L X80 Steel Heat Treatment
Secondary Austenite Precipitation during the Welding of Duplex Stainless Steels
Evaluation of Residual Stresses in Welded ASTM A36 Structural Steel by Metal Active Gas (MAG) Welding Process
Artificial Neural Network Model for Predict of Silicon Content in Hot Metal Blast Furnace
Preparation and Melting of Zr-1.0Nb Alloy
Hysteresis Modeling of NdFeB Magnets with High Nd
Shape Anisotropy as Coercivity Mechanism
Loss Separation Model: A Tool for Improvement of Soft Magnetic Materials
Perspectives for the Brazilian Industry of Rare-Earth Magnets
EBSD Analysis of SmCoFeCuZr Alloys
Suitable Nanostructures for Obtaining the Maximum Energy Product in Magnets
Effect of Cooling Rate on the Corrosion Behavior of As-Cast SAF 2205 Duplex Stainless Steel after Solution Annealing Treatment
Study and Development of Advanced High Strength Steel to Automotive Industry Applications
The Influence of High Gravity in PbSn Eutectic Alloy
The Influence of Gravity on Eutectic PbSn Alloy Grown by the Vertical Bridgman Method
Displacement of the Ingnition Furnace in the Iron Ore Sintering with Re-Circulation of Waste Gases
Simulation of Cooling Curves of the Heat Affected Zones of API 5L X80 Steel of Welds Made by Flux Core Arc Welding Self Protecting
Chapter 6: Coatings and Surface Engineering
Evaluation of Green Corrosion Inhibitors for Applying in Food Packaging
Study of the Efficiency of Ag-SiO2 Nanoparticles as Additives in Anticorrosion Coatings
Corrosion Behavior of Fe-Mn-Si-Cr-Ni-Co Shape Memory Stainless Steel in Highly Oxidizing Medium
Characterization of AISI 316L Stainless Steel Pattern via DC Plasma Nitriding
Development of Coating to Metallic Surfaces with Capacitive Capabilities for Applications in Electronics
Parameters Evaluation of Bond-Coat Deposited by CO2 Laser Beam for Aeronautical Turbine Blades
Structural Changes in TiO2 Films Formed by Anodizing of Electro-Polished Titanium
Zirconium Based Metal Pretreatments: A Characterization Method for Ecologically Sustainable Thin Film Surface Pretreatments
Corrosion by Sulfate Reducing Bacteria in Welded Joints of Stell API 5L X80
Effect of Thermal Aging at Low Temperature on the Mechanical Properties and Corrosion Resistance of LDX 2404 Duplex Stainless Steel
Obtaining and Characterization of Zirconium and Cerium Coatings
Pre-Treatment of Niobium Phosphate for Protection against Carbon Steel Corrosion
Effect of Argon during Diamond Deposition by Hot Filament Chemical Vapor Deposition
Analysis of the Metallurgical Bonding between Inconel and NiCrAlY Coatings by HVOF and with CO2 Laser Beam
Chapter 7: Materials and Technologies for Application in Environmental Engineering
Sorption of Bright Yellow Dyes by Filter Papers
Functionalization of Cellulose with Cysteamine: Synthesis, Characterization, and Adsorption
Cellulose Phosphate Applied in the Removal of the Drug Acetaminophen from Aqueous Media
Synthesis and Characterization of CMC for Potential Application as Adsorbent in Water Treatment
Environmental Evaluation of Stabilized and Solidified Products in Brazil: A Review
Attapulgite Performance in the Degradation of the Yellow Bright Dye
Photocatalysis of Coomassie Brilliant Blue Using Clay Mineral
Incorporation of Zirconium Oxide on the Surface of Palygorskite Clay for Photodegradation of Industrial Dye
Application of Palygorskite in Purification Process of Frying Oil
Study of the Interaction of Copper Nanoparticles with Titanium in Landfill Soils Layers
Effluent Treatment of Synthetic Tanning by Nanomaterials Photocatalytic
Synthesis and Photocatalytic Evaluation of Nanocrystalline ZnO Obtained by High Energy Milling
Ion Exchange in Sodium Titanate Nanoribbons and its Application in Dye Photodegradation of Remazol Blue
Chapter 8: Films and Membranes
Influence of the Addition of Inorganic Salt in Obtaining Hybrid Membranes
Electrochemical Behavior of Electroactive PVS/PANI Films Containing Chemically Modified Cellulose
Development of Polymer Membranes Modified with a Porogenic Agent
Photosensitized Polystyrene Film for Dye TX under Different Radiation Sources
Influence of Content and Treatment of Clay in the Morphology of PES Membranes
Mechanical Analysis of Biodegradable Films from Native and Chemically Modified Potato Starches
Morphological Analysis of Membranes of PES/Commercial Clay
Nanostructured and Electroactive Hybrid Films Containing Microcrystalline Cellulose Modified with the Phosphate Group: Synthesis and Characterization
Chapter 9: Materials and Technologies in Biomedical Engineering
Development and Evaluation of Capsule of Sodium Diclofenac and Paracetamol Using Mesocarp Babassu Powder as Excipient - Part II
Morphological Evaluation of Chitosan/Curcumin Beads and Powder: Effect of the Methanol as a Solvent
Evaluation of Antibacterial Activity of Chitosan Membranes Associated to Unripe Banana Peel
Development and Characterization of Chitosan Membranes as a System for Controlled Release of Piperine
Antibacterial Activity of a Chitosan Derivative Obtained in the Absence of a Solvent
Evaluation of the Potential of Mesocarp Babassu Powder as a Technological Excipient to Pharmaceutical Industry - Part I
Synthesis and Characterization of Fe3O4 Nanoparticles Stabilized by Polyvinylpyrrolidone/Polyethylene Glycol with Variable Mass Ratios
Synthesis and Characterization of Ceramic Modified with Niobium for Biomedical Applications
Hydroxyapatites Obtained from Different Routes and their Antimicrobial Properties
Hydroxyapatite Nanoparticles: Synthesis by Sonochemical Method and Assessment of Processing Parameters via Experimental Design
ß-TCP Produced through the Starch Consolidation Technique
Effect of Some Heat Treatments on Anelastic Properties of Ti-15Zr-xMo Alloys
Surface Modification of the Alloy Ti-7.5Mo by Anodization for Biomedical Applications
Osseointegration of Ti-30Ta Implants without Primary Stability: Effect of Tranexamic Acid
Nanotubes Growth on Ti-15Mo Alloys by Anodization at Low Voltage
Surface Modification of Ti-30Ta Alloy by Electrospun PCL Deposition
Mechanical and Microstructural Characterization of the Ti-25Ta-25Nb Alloy for Dental Applications
Preparation and Characterization of Ti-10Mo-xZr Alloys for Biomedical Applications
Preparation, Microstructural Characterization, and Selected Mechanical Properties of Ti-20Zr-2.5Mo and Ti-20Zr-7.5Mo Used as Biomaterial
Effect of Hot Swaging on Microstructure and Properties of Aged Ti-10Mo-20Nb Alloy
Evaluation of Setting Time, Ions Release, Sealing Ability and Adhesion of a Novel Experimental Endodontic Cement
Biocidal Glasses with High Performance: Comparison of the Antimicrobial Action Obtained by Use of Different Metal Ions
Different Synthesis Routes for Hydroxyapatite Nanoparticles by Mechanical Stirring
Chapter 10: Semiconductors and Materials for Alternative Energy
Deposition by Spray-Pyrolysis of Tin Oxide Doped with Fluorine Produced by Sol-Gel Method
Synthesis of ZnO Nanoparticles Doped with Cobalt: Influence of Doping on the Magnetic and Fluorescent Properties
Pd-Based Electrocatalysts Prepared by Borohydride Reduction Method for Methanol and Ethanol Electro-Oxidation in Alkaline Medium
Effects of Solvent and Concentration of Borohydride for the Preparation of PtRu/C Electrocatalysts for Direct Methanol Fuel Cell Anodes - A Factorial Design Study
Chapter 11: Materials and Technologies in Chemical Engineering
Influence of Time and Temperature on Directional Growth of MoO3
Kinetic of Self-Reducing Mixtures of Iron Ore and Biomass of Elephant Grass
Sintering of Manganese Ore Tailings under an Argon Atmosphere
Influence of Clay Swelling Inhibitor in Filtration Properties of Water-Based Drilling Fluids
Contaminants Recovery from Acid Mine Drainage
