Sonstiges, Englisch, Band Volume 869, 1064 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Materials Science Forum
Sonstiges, Englisch, Band Volume 869, 1064 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Materials Science Forum
ISBN: 978-3-03859-317-1
Verlag: Trans Tech Publications
Presented results of scientific and engineering research could be useful for engineers, students and academics from various fields of applied materials science.
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Pure and Doped SrTiO3 Powders Obtained by Ultrasonic SynthesisEffect of Strontium Doping on the Structural, Morphological, and Dielectric Properties of PZT CeramicsStudy on the Piezoelectric Behavior and Structural Changes of Strontium Doped PZT CeramicsStructural and Microstructural Properties of Si-C and Si-C-B Powders Obtained by High-Energy Ball MillingUse of Statistical Techniques in the Optimization of the Process "Starch Consolidation"Nondestructive Analysis of Bi2212 Bulk Superconducting Ceramics in the C-Axis DirectionSynthesis, Characterization and Photoluminescent Properties of ZrO2 NanocrystalsObtaining of Ceramic Sensor Devices for Soil Humidity Measurements in Different Climatic ConditionsComparative Analysis of Fracture Toughness Obtained by Different Techniques in Alumina Matrix - Dispersed TZP Zirconia CompositesHarder and Denser AlN-TiB2 Ceramic Composites Processed by Spark Plasma SinteringEffect of Boron and Carbon Addition on the Phase Transformations during High-Energy Ball Milling and Subsequent Sintering of Si3N4+B and Si3N4+C Powder MixturesFracture Stress Analysis in Ceramic Composites of Alumina Matrix with Zirconia 3Y-TZP Nanograins for Mechanical Shielding of SatellitesSynthesis and Sintering of LaCo1-XFexO3 Ceramics: Microstructure AnalysisThermal Characterization of Neodymium-Barium-Copper Ceramic (NBCo Ceramic) Synthesized from Barium CarbonateGa2O3-Doped ZnO-Nb2O5-TiO2 Dielectric Resonators for Terrestrial and Space Telecommunications ApplicationsRheological Behavior of Paraffin-Alumina Emulsions and their Microstructural EffectsEvaluation of Sample Preparation Parameters in the Compressive Strength of Cementitious CompositesA Study of the Mechanical Behavior of Concrete Using Additive and Waste Tires Rubber through a Diametral Compression Test Using Digital Image CorrelationDetermining the Content of Toxic Substances in Panels from Pruning Acacia mangium WilldHydration and Dehydration of High Initial Strength Portland Cement Type CP V - ARIA Study of the Chemical and Physical Characteristics of the Soils from the South of Piau? for Soil-Cement Brick ProductionMoisture Expansion during the Formation of Crystalline Phases in Clay/CaCO3 MixturesEvaluation of a Tacking Stage for Adherence, between Mortar and Ceramic BrickFactorial Design for 32 Experimental Planning of Clay Ceramic Incorporated with Ornamental Stone WasteInfluence of Weather Exposure on Dimensional Changes in Clay Ceramics Incorporated with Granite ResidueProduction Speed and its Influence on Hue Variation on Tiles Decoration Based on Silicon Cylinder Technique Laser Engraving MethodInfluence of Reburning on the Pozolanicity of Sugar-Cane Bagasse Ashes with Different CharacteristicsUtilization of Foundry Waste to Produce Ceramic Matrix CompositesPurification Route of Pyrite from Coal MiningMicrostructural Characterization of Ornamental Rock Samples: Cariri RocksRecycled Alumina Production from the Anodizing Industry to Tubulation Coating of Petroleum CrakingSynthesis of Ceramic Pigment Based on Crystal Structure of WollastoniteOrganofunctionalization of Natural Palygorskite with Ethylene Sulfide in the Absence of a SolventEvaluation of the Potential of Using Quartzite Residue in Mass for the Production of Sanitary WareThe Use of Dust Emission from Foundry Industry as Raw Material to the Industry of Ceramic CoatingChemical-Mineralogical and Microscopic Characterization of Clay Used as Raw Materials in Santa Gertrudes' Ceramic PoleBeneficiation of Kaolins by HydrocycloningDynamic-Mechanical Performance of Sponge Gourd Fiber Reinforced Polyester CompositesComparison between Rice Husk Ash and Commercial Silica as Filler in Polymeric CompositesMechanical Analysis of Polybenzoxazine Matrix in Fiber Metal LaminatesTensile Behavior of Epoxy Composites Reinforced with Thinner Fibers of Sugarcane BagasseCharpy Toughness Behavior of Eucalyptus Fiber Reinforced Polyester Matrix CompositesChemical Treatment and Characterization of Fiber of Babassu Coconut Epicarp (Orbignya phalerata) for Application in Polymeric CompositeComposites Based on Thermoset Resin and Orbignya phalerata (Babassu Coconut): Evaluation of Mechanical Properties, Morphology and Water SorptionBending Mechanical Behavior of Epoxy Matrix Reinforced with Buriti FiberTensile Behavior of Epoxy Composites Reinforced with Thinner Sisal FibersUnder Pressure Processed Polyester Composites with High Amount of Curaua Fibers for Improved Tensile PropertiesCarnauba and Rhea Americana Eggshell Powder Incorporation in PHB BionanocompositesEvaluation of Biodegradability of a Compost Obtained from Polymeric Composite Reinforced Natural FibersDifferential Scanning Calorimetry Tests of Epoxy and Polyester Composites Reinforced with Giant Bamboo FibersDevelopment of Ni/h-BN Self-Lubricating Composite Powder by High-Energy Ball MillingCharacterization by Fourier Transform Infrared (FTIR) Analysis for Natural Jute FiberStudy of the Degradability of PA6/Organoclay NanocompositesEffect of Molecular Weight of Polyamide 6 in Rheological Properties of Nanocomposites with Brazilian OrganoclayEvaluation of Biodegradation of PHB/PP-G-MA/Vermiculite BionanocompositesCharacterization of Bionanocomposites PHB, PEG and Organophilic ClayEvaluation of Current in Composites PVAL/Ceramics for Detection of Leakage Current Generated in Electrical InsulatorsEffects of 3-APTMS-Modified Nano-SiO2 on the Mechanical Properties and Crystallization Behavior of Polyamide-6Stress Cracking Analysis on Automotive Tubes Made with Polyamide 12Mechanical Properties of Natural Fibers Reinforced Polymer Composites: Palm/Low Density PolyethyleneCharacterization of Epoxy Matrix Reinforced with Banana Fibers Thermal Properties by Photoacoustic TechniquePreparation and Characterization of Composites Obtained of Polymeric Waste Coming from Boards Electronic EquipmentEffect of Hydrolytic Degradation on Mechanical Properties of PCLChanges in Molecular Weight of Poly(Styrenesulfonate) Initiated by Thioxanthone: Photolysis and Photo-OxidationProcessing of Pet-Silver Nanocomposite FilamentsStudy of Damage in the Medium Density Polyethylene Using Digital Image CorrelationTensile Test of High Strength Thinner Curaua Fiber Reinforced Polyester Matrix CompositeInfluence of Graphite Powder and Carbon Black Weight Percentages on the Electrical Properties of Epoxy Composite PlatesPullout Tests Behavior of Polyester Matrix Reinforced with Malva FiberCorrelation between the Density and the Diameter of Fique FibersDensity Weibull Analysis of Pineapple Leaf Fibers (PALF) with Different DiametersFabrication of Polypyrrole Nanoparticles Using Microemulsion Polymerization for Diferent Py/APS/SDS Molar RatiosEffect of the Fiber Equivalent Diameter on the Elastic Modulus of Eucalyptus FibersInfluence of Martensitic Transformation on the Fatigue of Low Temperature Metastable Stainless SteelEvaluation of Martensite Fraction in 1026 Steel by Infrared Thermography Combined with the Koistinen-Marburger ModelApplication of Computational Thermodynamics to the Evolution of Surface Tension and Gibbs-Thomson Coefficient during Multicomponent Aluminum Alloy SolidificationFormation of Ni3Ta, Ni2Ta and NiTa by High-Energy Ball Milling and Subsequent Heat TreatmentAnalysis of the Microstructural Evolution during the Transient Upward, Downward and Horizontal Directional Solidification of the Al-1.2wt%Pb Monotectic AlloyStatic Aging Behavior of Microalloyed Wire Steel and Carbon Wire SteelFriction Stir Welding of Aluminium Alloy SheetsManufacturing and Characterization of AA1100 Aluminum Alloy Metal Matrix Composites Reinforced by Silicon Carbide and Alumina Processed by Powder MetallurgyThermal Parameters, Tertiary Dendritic Growth and Microhardness of Directionally Solidified Al-3wt%Cu AlloyPulsed Nd:YAG Laser Welding of UNS S 32205 Duplex Stainless SteelCrystallization of Amorphous Cu49.7Ti31.8Zr11.3Ni7.2 AlloyEffect of Corrosion of Stainless Steel Welded within Lithium ChlorideInfluence of Heat Treatment on Martensitic Transformations in Copper-Based Alloys with Shape Memory EffectMicrostructural Characterization of Joints of Maraging 300 Steel Welded by Laser and Subjected to Plasma Nitriding TreatmentSintered Nickel Casing for Irradiation TargetsStrain-Induced Martensite Formation of AISI 304L Steel Sheet: Experiments and ModelingMechanical Behavior and Structural Analysis of a TiNi Alloy Annealled in the 300 to 500?C Range and Air CooledStudy of Fatigue in AISI 4340 Steel with Different Microstructural Conditions, Submitted to a Surface Treatment of Shot PeeningThe Effect of Phase Transformation on the Tensile Fracture of Austenitic Stainless SteelEvaluation of Cracking Susceptibility of Weldment Container for Nuclear Power PlantFracture Behavior of 316 Stainless Steel under Creep at 600 and 800?CStudy of Aluminum Alloy 7050 T7451 Isotropic HardeningElasto-Plastic Modeling of the Limit Strains in Metallic SheetsWork Hardening and Microstructural Effect during Dynamic Deformation of Polycrystalline CopperSpecial Effects in Deformation Mechanism Maps for Austenitic Stainless SteelsKinetic Study on Martensite Formation in Steels 1045 and 4340 under Variable Cooling RatesCharacterization of Residual Stresses and Microstructural by Technique of Magnetic Barkhausen Noise of API 5L X80 Steel Heat TreatmentSecondary Austenite Precipitation during the Welding of Duplex Stainless SteelsEvaluation of Residual Stresses in Welded ASTM A36 Structural Steel by Metal Active Gas (MAG) Welding ProcessArtificial Neural Network Model for Predict of Silicon Content in Hot Metal Blast FurnacePreparation and Melting of Zr-1.0Nb AlloyHysteresis Modeling of NdFeB Magnets with High NdShape Anisotropy as Coercivity MechanismLoss Separation Model: A Tool for Improvement of Soft Magnetic MaterialsPerspectives for the Brazilian Industry of Rare-Earth MagnetsEBSD Analysis of SmCoFeCuZr AlloysSuitable Nanostructures for Obtaining the Maximum Energy Product in MagnetsEffect of Cooling Rate on the Corrosion Behavior of As-Cast SAF 2205 Duplex Stainless Steel after Solution Annealing TreatmentStudy and Development of Advanced High Strength Steel to Automotive Industry ApplicationsThe Influence of High Gravity in PbSn Eutectic AlloyThe Influence of Gravity on Eutectic PbSn Alloy Grown by the Vertical Bridgman MethodDisplacement of the Ingnition Furnace in the Iron Ore Sintering with Re-Circulation of Waste GasesSimulation of Cooling Curves of the Heat Affected Zones of API 5L X80 Steel of Welds Made by Flux Core Arc Welding Self ProtectingEvaluation of Green Corrosion Inhibitors for Applying in Food PackagingStudy of the Efficiency of Ag-SiO2 Nanoparticles as Additives in Anticorrosion CoatingsCorrosion Behavior of Fe-Mn-Si-Cr-Ni-Co Shape Memory Stainless Steel in Highly Oxidizing MediumCharacterization of AISI 316L Stainless Steel Pattern via DC Plasma NitridingDevelopment of Coating to Metallic Surfaces with Capacitive Capabilities for Applications in ElectronicsParameters Evaluation of Bond-Coat Deposited by CO2 Laser Beam for Aeronautical Turbine BladesStructural Changes in TiO2 Films Formed by Anodizing of Electro-Polished TitaniumZirconium Based Metal Pretreatments: A Characterization Method for Ecologically Sustainable Thin Film Surface PretreatmentsCorrosion by Sulfate Reducing Bacteria in Welded Joints of Stell API 5L X80Effect of Thermal Aging at Low Temperature on the Mechanical Properties and Corrosion Resistance of LDX 2404 Duplex Stainless SteelObtaining and Characterization of Zirconium and Cerium CoatingsPre-Treatment of Niobium Phosphate for Protection against Carbon Steel CorrosionEffect of Argon during Diamond Deposition by Hot Filament Chemical Vapor DepositionAnalysis of the Metallurgical Bonding between Inconel and NiCrAlY Coatings by HVOF and with CO2 Laser BeamSorption of Bright Yellow Dyes by Filter PapersFunctionalization of Cellulose with Cysteamine: Synthesis, Characterization, and AdsorptionCellulose Phosphate Applied in the Removal of the Drug Acetaminophen from Aqueous MediaSynthesis and Characterization of CMC for Potential Application as Adsorbent in Water TreatmentEnvironmental Evaluation of Stabilized and Solidified Products in Brazil: A ReviewAttapulgite Performance in the Degradation of the Yellow Bright DyePhotocatalysis of Coomassie Brilliant Blue Using Clay MineralIncorporation of Zirconium Oxide on the Surface of Palygorskite Clay for Photodegradation of Industrial DyeApplication of Palygorskite in Purification Process of Frying OilStudy of the Interaction of Copper Nanoparticles with Titanium in Landfill Soils LayersEffluent Treatment of Synthetic Tanning by Nanomaterials PhotocatalyticSynthesis and Photocatalytic Evaluation of Nanocrystalline ZnO Obtained by High Energy MillingIon Exchange in Sodium Titanate Nanoribbons and its Application in Dye Photodegradation of Remazol BlueInfluence of the Addition of Inorganic Salt in Obtaining Hybrid MembranesElectrochemical Behavior of Electroactive PVS/PANI Films Containing Chemically Modified CelluloseDevelopment of Polymer Membranes Modified with a Porogenic AgentPhotosensitized Polystyrene Film for Dye TX under Different Radiation SourcesInfluence of Content and Treatment of Clay in the Morphology of PES MembranesMechanical Analysis of Biodegradable Films from Native and Chemically Modified Potato StarchesMorphological Analysis of Membranes of PES/Commercial ClayNanostructured and Electroactive Hybrid Films Containing Microcrystalline Cellulose Modified with the Phosphate Group: Synthesis and CharacterizationDevelopment and Evaluation of Capsule of Sodium Diclofenac and Paracetamol Using Mesocarp Babassu Powder as Excipient - Part IIMorphological Evaluation of Chitosan/Curcumin Beads and Powder: Effect of the Methanol as a SolventEvaluation of Antibacterial Activity of Chitosan Membranes Associated to Unripe Banana PeelDevelopment and Characterization of Chitosan Membranes as a System for Controlled Release of PiperineAntibacterial Activity of a Chitosan Derivative Obtained in the Absence of a SolventEvaluation of the Potential of Mesocarp Babassu Powder as a Technological Excipient to Pharmaceutical Industry - Part ISynthesis and Characterization of Fe3O4 Nanoparticles Stabilized by Polyvinylpyrrolidone/Polyethylene Glycol with Variable Mass RatiosSynthesis and Characterization of Ceramic Modified with Niobium for Biomedical ApplicationsHydroxyapatites Obtained from Different Routes and their Antimicrobial PropertiesHydroxyapatite Nanoparticles: Synthesis by Sonochemical Method and Assessment of Processing Parameters via Experimental Design?-TCP Produced through the Starch Consolidation TechniqueEffect of Some Heat Treatments on Anelastic Properties of Ti-15Zr-xMo AlloysSurface Modification of the Alloy Ti-7.5Mo by Anodization for Biomedical ApplicationsOsseointegration of Ti-30Ta Implants without Primary Stability: Effect of Tranexamic AcidNanotubes Growth on Ti-15Mo Alloys by Anodization at Low VoltageSurface Modification of Ti-30Ta Alloy by Electrospun PCL DepositionMechanical and Microstructural Characterization of the Ti-25Ta-25Nb Alloy for Dental ApplicationsPreparation and Characterization of Ti-10Mo-xZr Alloys for Biomedical ApplicationsPreparation, Microstructural Characterization, and Selected Mechanical Properties of Ti-20Zr-2.5Mo and Ti-20Zr-7.5Mo Used as BiomaterialEffect of Hot Swaging on Microstructure and Properties of Aged Ti-10Mo-20Nb AlloyEvaluation of Setting Time, Ions Release, Sealing Ability and Adhesion of a Novel Experimental Endodontic CementBiocidal Glasses with High Performance: Comparison of the Antimicrobial Action Obtained by Use of Different Metal IonsDifferent Synthesis Routes for Hydroxyapatite Nanoparticles by Mechanical StirringDeposition by Spray-Pyrolysis of Tin Oxide Doped with Fluorine Produced by Sol-Gel MethodSynthesis of ZnO Nanoparticles Doped with Cobalt: Influence of Doping on the Magnetic and Fluorescent PropertiesPd-Based Electrocatalysts Prepared by Borohydride Reduction Method for Methanol and Ethanol Electro-Oxidation in Alkaline MediumEffects of Solvent and Concentration of Borohydride for the Preparation of PtRu/C Electrocatalysts for Direct Methanol Fuel Cell Anodes - A Factorial Design StudyInfluence of Time and Temperature on Directional Growth of MoO3Kinetic of Self-Reducing Mixtures of Iron Ore and Biomass of Elephant GrassSintering of Manganese Ore Tailings under an Argon AtmosphereInfluence of Clay Swelling Inhibitor in Filtration Properties of Water-Based Drilling FluidsContaminants Recovery from Acid Mine Drainage
