Functional and Functionally Structured Materials II

Chinese Materials Conference 2017 (CMC 2017)
Erscheinungsjahr 2018
ISBN: 978-3-0357-1244-5
Verlag: Trans Tech Publications

Buch, Englisch, 1132 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 2020 g

This collection contains selected papers presented at the Chinese Materials Conference 2017 (CMC 2017, Yinchuan City, Ningxia, China, July 06-12, 2017) and proposes to readers the last research results in area of modern structural and functional materials and technologies of their processing in the modern mechanical engineering, materials in the electronics, energy storage devices and alternative energy production, advanced building materials, materials and technologies in the environmental engineering and practice of the waste recycling. We hope this collection will be useful for the wide range of engineers and researchers in their activity.

Autoren/Hrsg.

Han, Ya Fang

Fachgebiete

• Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde

Inhaltsverzeichnis

Preface
Chapter 1: High Performance Structural Alloys, Properties and Processing Technologies
Effects of the Delivery Tube Diameter on the Qualities of Cu-9.7Sn-0.2P Alloy Powder Produced by Gas Atomization
Effect of Cold Rolling Reduction on Recrystallization Behaviors of AA5754 Sheets in a Short Annealing Time
Property Requirements and Research Progress of Aluminum Alloy Sheets for Automotive Closure
Thermal Deformation Behavior and Processing Map of Al-Mg-Er Alloy
Bake Precipitation Behavior in AA5182 Sheet for Can End Stock
Hot Compression Deformation Behavior and Microstructural Evolution of Al-7.5Zn-1.5Mg-0.2Cu-0.2Zr Alloy
Effect of Cold Deformation and Annealing on Microstructure and Mechanical Properties of 5083 Aluminum Alloy Sheets
Microstructural Changes and Thermal Stability of A201, 319s and 2618 Aluminum Alloys during Thermal Exposure
Deformation Behavior and Microstructure Evolution of 6063 Alloy during Hot Compression
Trace Al-Ti-C-Ce on Solidification Structure Transformation and Fracture Properties of Al-Cu-Mn Alloy
Effect of Equal Channel Angular Pressing on Microstructure and Mechanical Properties of ZL205A Alloy
Effects of Mechanical Vibration on Double Curvature Creep Aging Forming of 2124 Aluminum Alloy
Aging Behavior of A356.2 with Yb Modified
An Experimental Platform for Controlled Solidification and Heat Treatment and its Application in TiAl Alloys
Superplastic Deformation Behavior and Cavity Formation of Ti55 Titanium Alloy
Effects of Heat Treatment on Microstructures and Mechanical Properties of Ti-38644 Alloy for Aerospace Fasteners
Characteristics and Evolution Mechanism of Solidification Microstructure for Laser Additive Manufactured Ti2AlNb-Based Alloy
On the Partial Pressure Measurement and Activity Calculation of Mn in the Ni-Cr-Co-Mo Alloy Melt
Microstructure Analysis and Creep Behaviour Modelling of Powder Metallurgy Superalloy
Effects of Phosphorus on Microstructure and Mechanical Properties in NiCr Alloys
Segregation and Precipitation Behavior of Phosphorus in a Ni-Fe-Cr Base Wrought Superalloy
Effect of Extrusion Texture on Mechanical and Electrochemical Properties of Aluminum Alloy Drill Pipe
Numerical Simulation of Combustion Resistant Titanium Alloy Wear Behavior at High Temperature Fields
Effects of Extrusion-Shear and Direct Extrusion on the Plastic Deformation of AZ31 Magnesium Alloy
Effect of Welding Parameters on Defects and Fracture Behavior of Friction Stir Welded 2195-T8 Al-Li Alloy Joints
Effect of Planar Anisotropy and Tension-Compression Asymmetry of CP-Ti on its Deep Drawing Behavior at Room Temperature
Effects of Solid Solution and Aging Treatment on Texture Evolution and Properties of Cu-Ni-Si Alloy
A Comparative Study on the Friction and Wear Properties of Three Different Copper Alloys
Experimental Study and Numerical Simulation of Microstructure Evolution in Al-Si Eutectic Solidification Process
Influence of Silicon on Nucleation and Growth Process of Spherical Graphite in Ni-C Alloys Solidification Structure
Effects of Process Parameters on Morphologies and Microstructures of Laser Melting Deposited V-5Cr-5Ti Alloys
Chapter 2: Steels and Structural Metals, Properties and Processing Technologies
Rate Theory for Dislocation Loops Evolution in AL-6XN Austenitic Stainless Steel under Proton Irradiation
Fatigue Mechanism of Domestic 316LN Stainless Steel in Simulated AP1000 First-Loop Water Environment
Influence of Warm Deformation on Strain-Induced Martensite Behavior of 316L Stainless Steel
Formation of Face Centered Cubic Titanium Thin Films on MgO(111) Single Crystal Substrate
Effect of Annealing Temperature on Microstructure and Properties of Ultra Purified Ferritic Stainless Steel Containing Copper
Microstructure Evolution of Copper Strip during Continuous Extrusion and Rolling Forming
Effect of Copper and Annealing Dew Point on Oxidation Behavior of C-Si-Mn Steels
Bare Spot Defect on a Hot Dip Galvanized DP Sheet Strip
Effect of Slab Centerline Segregation on DWTT Properties of 22mm Thick X80M Hot Rolled Steel Strip
Effect of Ultra-Fast Cooling Rate on the Microstructure and Mechanical Properties of High Strength Cold-Rolled Sheet under Continuous Annealing
Microstructure and Properties of HAZ in Low-Carbon Bainite E550 Steel during Double-Pass Welding Thermal Cycle
Nondestructive Evaluation Method of Average Grain Size in TWIP Steel by Laser Ultrasonic
Strain-Hardening Properties of High Grade Line Pipes
Transfer Welding Process and Microstructure and Properties of Titanium/Steel Clad Pipe
Simulation Study on Heating Process of Hot Rolled Steel Strip for X80M Pipeline Steel
Development of Domestic CT80S Sulfur Resistance Coiled Tubing
Chapter 3: Functional Coatings, Claddings, Surface Treatment and Corrosion Behavior of Structural Materials
Microstructure and Oxidation Resistance of Y Modified Silicide Coatings Prepared on Zr-Ti-Al Alloy
Bio-Inspired In Situ Fabrication of 11-Mercaptoundecanoic Acid Coating on Stainless Steel 304 for Corrosion Protection
A Thick Al-Based Composite Coating Cladded by the Amorphous Powder
Wear Resistance of a Large Thick Fe Based Amorphous Composite Coating Deposited by Laser Cladding
Electrodeposition and the Optimization of Molybdenum Layer on Nb-Ti-Si Based Ultra-High Alloys from Aqueous Solution
Efficient Micro-Arc Oxidation Technology for As-Cast AZ80 Magnesium Alloy
Morphology and Microstructure of Tungsten Films by Magnetron Sputtering
Understanding the Inhibition Mechanism of a Supramolecular Complex as the Corrosion Inhibitor for Mild Steel in the Condensate Water
Influence of Sc Addition on the Corrosion Behavior of Medium Strength Al-Zn-Mg Alloy
Effect of Sodium Citrate on Electrochemical Behaviour of Copper in Acid Bath
Chapter 4: Functional Ceramics and Composite Materials
Effect of WC Additive on Microstructural Evolution and Properties of TiC Steel-Bonded Carbide
Effects of Lanthanum Substitution on Dielectric, Ferroelectric and Electro-Optic Properties of Slim-Loop PLZT Ceramics
Preparation and Characterization of Mechanical Properties of Hydroxyapatite/Carbon Nanotube Laminated Ceramic Composites Consolidated by Spark Plasma Sintering
Raman/Infrared Spectra and Microwave Dielectric Properties of 0.22CaTiO3-0.78(Li0.5Sm0.5)TiO3 Ceramics with MgO Additive
Effects of Different Matrix on Interface and Compression Fracture Behavior of WC Particles Reinforced Iron Matrix Composites
The Structural Evolution of Al-6Y-2P Master Alloy and its Influence on the Refinement of Mg2Si Phase in Mg2Si/Al Composites
Establishment of Processing Maps for 25vol.% B4CP/AA6061 Composite and its Application in Hot Pack-Rolling Process
A Facile Method of Preparing Core/Shell Cu@Mo Powders

In Situ Synthesis and Structural Design of Ti/TiC Functionally Graded Materials
Microstructure and Mechanical Properties of AlN Particle Reinforced Mg-Al Matrix Composites with Different Particle Contents
Effect of Carboxylic CNTs Filling on Mechanical Behaviors of Basalt Fiber/Epoxy Composites
Machinability for C/SiC Composite Material by Electrical Discharge Machining
Interfacial Microstructure and Formation Mechanism of Zirconia Ceramic and Nb Brazed with Ag-Cu-Ti Powder without and with Mo-Particle-Reinforced
Effect of Modified Diatomite on Crystallinity and Mechanical Properties of Polypropylene
3D Printing of Carbon Fiber Reinforced Plastics and their Applications
Interfacial Effect on Mechanical Properties of Polypropylene Ternary Nanocomposites
Chapter 5: Computational Procedures in Materials Science
Structures, Mechanical Properties and Band Structures of Pentagonal BxNy Monolayers
First-Principles Study of the Effect of Cr Content on Interstitial Oxygen Solution Behavior in Nb-Cr Alloys
Thermodynamic Calculation of Liquidus Projection of Multiple Aluminum Alloys
Stability, Mechanical Properties and Electronic Properties of X3Si (X=V, Nb, Cr, Mo and W) from First Principles Calculations
Tensile Properties of Carbon Nanoring Linked Graphene Sheets: A Molecular Dynamics Investigation
CRSS of Mg-X(X=Zn, Y) Binary Solid Solution via First-Principles Study
Design of New Weathering Steels through Thermodynamic Model of Nitrogen Solubility and CALPHAD
Influence of Initial Defects on the Mechanical Properties of Single Crystal Copper: Discrete Dislocation Dynamics Study
CBED and EELS Measurements of Post-Irradiated Aluminum Specimen Thickness
Cascade Collision near the Grain Boundary of Fe-Cr Alloy by MD Simulation
Chapter 6: Advanced Functional Materials
Magnetic Properties of Pure Iron with Respect to Different C/Si Ratios and Grain Sizes
Iron-Based Amorphous Magnetic Properties by Ni Content Tuning and Isothermal Treatment
A Centimeter-Size High Toughness Zr-Cu-Al-Nb Bulk Metallic Glass with Nano-Crystallization and Phase Separation
Effect of Service Environment on Mechanical Properties of FeCoNiCrAl0.1 Alloy
Y-Ray Shielding Performance and Mechanical Properties of Mortar Strengthened by Amorphous Alloy Fibers
Effect of Annealing Time on the Magnetic Properties of FeNiCuNbSiB Dual-Phase Alloys
Preparation and Sorption Properties of Zr-Co-Ce Getter Films
Easy Preparation of Bacterial Cellulose/Triamcinolone Acetonide Composites and their Inhibition for Fibroblasts
Glucose-Responsive Hydrogels Based on Phenylboronic Acid
Synthetic Comb-Like Phase-Change Material Poly(Acrylonitrile-co-Lauric Acid) Copolymer for Low Temperature Energy Management
Preparation and Characterization of Flame Retardant PET Fiber via Melt Blending
Evaluation of Foaming and Nucleation and Growth Mechanism of Soy-Based Polyurethane Foams
A Metal Coordination Crosslinking Novel High Performance Thermoset
Investigation on the Dealloying Process of Mn75-xNi25Alx (x=0, 5, 10, 15, 20 at. %) Alloy Ribbons
Phase Transition Behavior and Magnetocaloric Effect in a Heusler Ni50Mn37Sn13 Unidirectional Crystal
Effects of Zr Content on the Bending Property and Crystallization Behavior of Ductile Zr-Based Bulk Metallic Glasses
Chapter 7: Materials and Technologies for Energy Storage Devices, Alternative Energy Production and Electronics
Chemical Modification Graphene as a High Performance Anode Material for Lithium-Ion Batteries
Preparation of Graphene/N-TiO2 Nanoclusters by One Step Anodic Oxidation for Visible-Light-Driven Hydrogen Production
Low Temperature Preparation of PbS Thin Films by Chemical Bath Deposition and the Photovoltaic Performance in Heterojunction Solar Cells
Enhanced Thermoelectric Properties of BiCuSeO Ceramics by Bi Vacancies
Synthesis and Thermoelectric Properties of WO3/Cu2SnSe3 Composites
Graphene-Carbon Nanotubes-Modified LiFePO4 Cathode Materials for High-Performance Lithium-Ion Batteries
Microfluidic Synthesis and Electrochemical Performance of Ternary Metals Nanoalloy: FePtSn
Si-Ni Alloy as Anode Materials for Lithium Ion Batteries: A First-Principles Study
Tungsten Matrix Material for Diffusion Barium Tungsten Cathode
Preparation and Influencing Factors of Molybdenum Targets and Magnetron-Sputter-Deposited Molybdenum Thin Films
Effects of Rare Earth Y Addition on Microstructural and Properties of Pure Copper
A Charge Storage Based Enhancement Mode AlGaN/GaN High Electron Mobility Transistor
Chapter 8: Materials and Technologies for Environmental Engineering and Waste Recycling
Improvement Effects of Different Environmental Materials on Coastal Saline-Alkali Soil in Yellow River Delta
Effects of Ferric Salts on Sludge Anaerobic Digestion and Desulphurization
Denitrification Activities of Mg-Mo-V-Ti Catalysts Prepared by Dipping Method at Low Temperature
Denitrification Activities of Mo-V-Ti Catalysts Prepared by Dipping Method at Low Temperature
Effects of Calcination Temperature on the Microstructure and Adsorption Properties of Attapulgite Microspheres
A Review of Research on Substrate Materials for Constructed Wetlands
Polyamidine as a New-Style Coagulant Aid for Dye Wastewater Treatment and its Floc Characteristics
Kinetic Equilibrium and Adsorption Thermodynamics of Direct Dyes by Ca/CTS/FA Composite
Influence of Catalysts with Different Templates on Direct Decomposition of NO in Cement Kiln Exhaust
Extraction of Tungsten and Vanadium from the Spent SCR Catalyst by High Pressure Alkaline Leaching Method
Preparation of Tungsten Nanoparticles from Spent Tungsten Carbide by Molten Salt Electrolysis
Effect of Cement Raw Material and Oxygen Concentration on SNCR Reaction
Different Precipitant Preparation of Nickel-Doped Mn/TiO2 Catalysts for Low-Temperature SCR of NO with NH3
Energy Consumption and Carbon Emission Analysis of Natural Graphite Anode Material for Lithium Batteries
Life Cycle Assessment of Typical Rubber-Plastic Sponge Production in China
Life Cycle Assessment of Typical Glass Wool Production in China
Life Cycle Assessment of Nickel Production in China
Environment Impact Analysis of Natural Graphite Anode Material Production
Comparative Life Cycle Assessment of Autoclaved Concrete Blocks and Fired Blocks in China
Synthesis and Photocatalytic Activity of Ag Doped TiO2 Nanofibers
Structure and Surface Properties of Al3+- Modified Sepiolite
Chapter 9: Advanced Building Materials
The Rheological Properties of Crumb Rubber with Different Recycled Waste Tires Modified Binders
A Comparative Life Cycle Assessment of Typical Foam Glass Production
Effect of Layered Double Hydroxides with Different Particle Size on Properties of Bitumen
Effect of Different Media Aqueous Solution on Road Performance of Asphalt Mixtures
Rheological Model and Viscoelasticity of Crumb Rubber Modified Bitumen
Investigation on Rheological Characteristics of Fresh Cement Mortar
Mechanical Properties of Self-Healing System in Cementitious Material with Microcapsule
Effect on Structure and Properties of Cement-Based Materials by Polymer-Modified Metakaolin Slurry

Über Autor(innen)

Ed. Prof. Ya Fang Han