Functional and Functionally Structured Materials II

Chinese Materials Conference 2017 (CMC 2017)
Erscheinungsjahr 2018
ISBN: 978-3-0357-2244-4
Verlag: Trans Tech Publications

Sonstiges, Englisch, Band Volume 913, 1132 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g

Reihe: Materials Science Forum

This collection contains selected papers presented at the Chinese Materials Conference 2017 (CMC 2017, Yinchuan City, Ningxia, China, July 06-12, 2017) and proposes to readers the last research results in area of modern structural and functional materials and technologies of their processing in the modern mechanical engineering, materials in the electronics, energy storage devices and alternative energy production, advanced building materials, materials and technologies in the environmental engineering and practice of the waste recycling. We hope this collection will be useful for the wide range of engineers and researchers in their activity.

Autoren/Hrsg.

Han, Ya Fang

Fachgebiete

• Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde

Inhaltsverzeichnis

Effects of the Delivery Tube Diameter on the Qualities of Cu-9.7Sn-0.2P Alloy Powder Produced by Gas AtomizationEffect of Cold Rolling Reduction on Recrystallization Behaviors of AA5754 Sheets in a Short Annealing TimeProperty Requirements and Research Progress of Aluminum Alloy Sheets for Automotive ClosureThermal Deformation Behavior and Processing Map of Al-Mg-Er AlloyBake Precipitation Behavior in AA5182 Sheet for Can End StockHot Compression Deformation Behavior and Microstructural Evolution of Al-7.5Zn-1.5Mg-0.2Cu-0.2Zr AlloyEffect of Cold Deformation and Annealing on Microstructure and Mechanical Properties of 5083 Aluminum Alloy SheetsMicrostructural Changes and Thermal Stability of A201, 319s and 2618 Aluminum Alloys during Thermal ExposureDeformation Behavior and Microstructure Evolution of 6063 Alloy during Hot CompressionTrace Al-Ti-C-Ce on Solidification Structure Transformation and Fracture Properties of Al-Cu-Mn AlloyEffect of Equal Channel Angular Pressing on Microstructure and Mechanical Properties of ZL205A AlloyEffects of Mechanical Vibration on Double Curvature Creep Aging Forming of 2124 Aluminum AlloyAging Behavior of A356.2 with Yb ModifiedAn Experimental Platform for Controlled Solidification and Heat Treatment and its Application in TiAl AlloysSuperplastic Deformation Behavior and Cavity Formation of Ti55 Titanium AlloyEffects of Heat Treatment on Microstructures and Mechanical Properties of Ti-38644 Alloy for Aerospace FastenersCharacteristics and Evolution Mechanism of Solidification Microstructure for Laser Additive Manufactured Ti2AlNb-Based AlloyOn the Partial Pressure Measurement and Activity Calculation of Mn in the Ni-Cr-Co-Mo Alloy MeltMicrostructure Analysis and Creep Behaviour Modelling of Powder Metallurgy SuperalloyEffects of Phosphorus on Microstructure and Mechanical Properties in NiCr AlloysSegregation and Precipitation Behavior of Phosphorus in a Ni-Fe-Cr Base Wrought SuperalloyEffect of Extrusion Texture on Mechanical and Electrochemical Properties of Aluminum Alloy Drill PipeNumerical Simulation of Combustion Resistant Titanium Alloy Wear Behavior at High Temperature FieldsEffects of Extrusion-Shear and Direct Extrusion on the Plastic Deformation of AZ31 Magnesium AlloyEffect of Welding Parameters on Defects and Fracture Behavior of Friction Stir Welded 2195-T8 Al-Li Alloy JointsEffect of Planar Anisotropy and Tension-Compression Asymmetry of CP-Ti on its Deep Drawing Behavior at Room TemperatureEffects of Solid Solution and Aging Treatment on Texture Evolution and Properties of Cu-Ni-Si AlloyA Comparative Study on the Friction and Wear Properties of Three Different Copper AlloysExperimental Study and Numerical Simulation of Microstructure Evolution in Al-Si Eutectic Solidification ProcessInfluence of Silicon on Nucleation and Growth Process of Spherical Graphite in Ni-C Alloys Solidification StructureEffects of Process Parameters on Morphologies and Microstructures of Laser Melting Deposited V-5Cr-5Ti AlloysRate Theory for Dislocation Loops Evolution in AL-6XN Austenitic Stainless Steel under Proton IrradiationFatigue Mechanism of Domestic 316LN Stainless Steel in Simulated AP1000 First-Loop Water EnvironmentInfluence of Warm Deformation on Strain-Induced Martensite Behavior of 316L Stainless SteelFormation of Face Centered Cubic Titanium Thin Films on MgO(111) Single Crystal SubstrateEffect of Annealing Temperature on Microstructure and Properties of Ultra Purified Ferritic Stainless Steel Containing CopperMicrostructure Evolution of Copper Strip during Continuous Extrusion and Rolling FormingEffect of Copper and Annealing Dew Point on Oxidation Behavior of C-Si-Mn SteelsBare Spot Defect on a Hot Dip Galvanized DP Sheet StripEffect of Slab Centerline Segregation on DWTT Properties of 22mm Thick X80M Hot Rolled Steel StripEffect of Ultra-Fast Cooling Rate on the Microstructure and Mechanical Properties of High Strength Cold-Rolled Sheet under Continuous AnnealingMicrostructure and Properties of HAZ in Low-Carbon Bainite E550 Steel during Double-Pass Welding Thermal CycleNondestructive Evaluation Method of Average Grain Size in TWIP Steel by Laser UltrasonicStrain-Hardening Properties of High Grade Line PipesTransfer Welding Process and Microstructure and Properties of Titanium/Steel Clad PipeSimulation Study on Heating Process of Hot Rolled Steel Strip for X80M Pipeline SteelDevelopment of Domestic CT80S Sulfur Resistance Coiled TubingMicrostructure and Oxidation Resistance of Y Modified Silicide Coatings Prepared on Zr-Ti-Al AlloyBio-Inspired In Situ Fabrication of 11-Mercaptoundecanoic Acid Coating on Stainless Steel 304 for Corrosion ProtectionA Thick Al-Based Composite Coating Cladded by the Amorphous PowderWear Resistance of a Large Thick Fe Based Amorphous Composite Coating Deposited by Laser CladdingElectrodeposition and the Optimization of Molybdenum Layer on Nb-Ti-Si Based Ultra-High Alloys from Aqueous SolutionEfficient Micro-Arc Oxidation Technology for As-Cast AZ80 Magnesium AlloyMorphology and Microstructure of Tungsten Films by Magnetron SputteringUnderstanding the Inhibition Mechanism of a Supramolecular Complex as the Corrosion Inhibitor for Mild Steel in the Condensate WaterInfluence of Sc Addition on the Corrosion Behavior of Medium Strength Al-Zn-Mg AlloyEffect of Sodium Citrate on Electrochemical Behaviour of Copper in Acid BathEffect of WC Additive on Microstructural Evolution and Properties of TiC Steel-Bonded CarbideEffects of Lanthanum Substitution on Dielectric, Ferroelectric and Electro-Optic Properties of Slim-Loop PLZT CeramicsPreparation and Characterization of Mechanical Properties of Hydroxyapatite/Carbon Nanotube Laminated Ceramic Composites Consolidated by Spark Plasma SinteringRaman/Infrared Spectra and Microwave Dielectric Properties of 0.22CaTiO3-0.78(Li0.5Sm0.5)TiO3 Ceramics with MgO AdditiveEffects of Different Matrix on Interface and Compression Fracture Behavior of WC Particles Reinforced Iron Matrix CompositesThe Structural Evolution of Al-6Y-2P Master Alloy and its Influence on the Refinement of Mg2Si Phase in Mg2Si/Al CompositesEstablishment of Processing Maps for 25vol.% B4CP/AA6061 Composite and its Application in Hot Pack-Rolling ProcessA Facile Method of Preparing Core/Shell Cu@Mo Powders
In Situ Synthesis and Structural Design of Ti/TiC Functionally Graded MaterialsMicrostructure and Mechanical Properties of AlN Particle Reinforced Mg-Al Matrix Composites with Different Particle ContentsEffect of Carboxylic CNTs Filling on Mechanical Behaviors of Basalt Fiber/Epoxy CompositesMachinability for C/SiC Composite Material by Electrical Discharge MachiningInterfacial Microstructure and Formation Mechanism of Zirconia Ceramic and Nb Brazed with Ag-Cu-Ti Powder without and with Mo-Particle-ReinforcedEffect of Modified Diatomite on Crystallinity and Mechanical Properties of Polypropylene3D Printing of Carbon Fiber Reinforced Plastics and their ApplicationsInterfacial Effect on Mechanical Properties of Polypropylene Ternary NanocompositesStructures, Mechanical Properties and Band Structures of Pentagonal BxNy MonolayersFirst-Principles Study of the Effect of Cr Content on Interstitial Oxygen Solution Behavior in Nb-Cr AlloysThermodynamic Calculation of Liquidus Projection of Multiple Aluminum AlloysStability, Mechanical Properties and Electronic Properties of X3Si (X=V, Nb, Cr, Mo and W) from First Principles CalculationsTensile Properties of Carbon Nanoring Linked Graphene Sheets: A Molecular Dynamics InvestigationCRSS of Mg-X(X=Zn, Y) Binary Solid Solution via First-Principles StudyDesign of New Weathering Steels through Thermodynamic Model of Nitrogen Solubility and CALPHADInfluence of Initial Defects on the Mechanical Properties of Single Crystal Copper: Discrete Dislocation Dynamics StudyCBED and EELS Measurements of Post-Irradiated Aluminum Specimen ThicknessCascade Collision near the Grain Boundary of Fe-Cr Alloy by MD SimulationMagnetic Properties of Pure Iron with Respect to Different C/Si Ratios and Grain SizesIron-Based Amorphous Magnetic Properties by Ni Content Tuning and Isothermal TreatmentA Centimeter-Size High Toughness Zr-Cu-Al-Nb Bulk Metallic Glass with Nano-Crystallization and Phase SeparationEffect of Service Environment on Mechanical Properties of FeCoNiCrAl0.1 AlloyY-Ray Shielding Performance and Mechanical Properties of Mortar Strengthened by Amorphous Alloy FibersEffect of Annealing Time on the Magnetic Properties of FeNiCuNbSiB Dual-Phase AlloysPreparation and Sorption Properties of Zr-Co-Ce Getter FilmsEasy Preparation of Bacterial Cellulose/Triamcinolone Acetonide Composites and their Inhibition for FibroblastsGlucose-Responsive Hydrogels Based on Phenylboronic AcidSynthetic Comb-Like Phase-Change Material Poly(Acrylonitrile-co-Lauric Acid) Copolymer for Low Temperature Energy ManagementPreparation and Characterization of Flame Retardant PET Fiber via Melt BlendingEvaluation of Foaming and Nucleation and Growth Mechanism of Soy-Based Polyurethane FoamsA Metal Coordination Crosslinking Novel High Performance ThermosetInvestigation on the Dealloying Process of Mn75-xNi25Alx (x=0, 5, 10, 15, 20 at. %) Alloy RibbonsPhase Transition Behavior and Magnetocaloric Effect in a Heusler Ni50Mn37Sn13 Unidirectional CrystalEffects of Zr Content on the Bending Property and Crystallization Behavior of Ductile Zr-Based Bulk Metallic GlassesChemical Modification Graphene as a High Performance Anode Material for Lithium-Ion BatteriesPreparation of Graphene/N-TiO2 Nanoclusters by One Step Anodic Oxidation for Visible-Light-Driven Hydrogen ProductionLow Temperature Preparation of PbS Thin Films by Chemical Bath Deposition and the Photovoltaic Performance in Heterojunction Solar CellsEnhanced Thermoelectric Properties of BiCuSeO Ceramics by Bi VacanciesSynthesis and Thermoelectric Properties of WO3/Cu2SnSe3 CompositesGraphene-Carbon Nanotubes-Modified LiFePO4 Cathode Materials for High-Performance Lithium-Ion BatteriesMicrofluidic Synthesis and Electrochemical Performance of Ternary Metals Nanoalloy: FePtSnSi-Ni Alloy as Anode Materials for Lithium Ion Batteries: A First-Principles StudyTungsten Matrix Material for Diffusion Barium Tungsten CathodePreparation and Influencing Factors of Molybdenum Targets and Magnetron-Sputter-Deposited Molybdenum Thin FilmsEffects of Rare Earth Y Addition on Microstructural and Properties of Pure CopperA Charge Storage Based Enhancement Mode AlGaN/GaN High Electron Mobility TransistorImprovement Effects of Different Environmental Materials on Coastal Saline-Alkali Soil in Yellow River DeltaEffects of Ferric Salts on Sludge Anaerobic Digestion and DesulphurizationDenitrification Activities of Mg-Mo-V-Ti Catalysts Prepared by Dipping Method at Low TemperatureDenitrification Activities of Mo-V-Ti Catalysts Prepared by Dipping Method at Low TemperatureEffects of Calcination Temperature on the Microstructure and Adsorption Properties of Attapulgite MicrospheresA Review of Research on Substrate Materials for Constructed WetlandsPolyamidine as a New-Style Coagulant Aid for Dye Wastewater Treatment and its Floc CharacteristicsKinetic Equilibrium and Adsorption Thermodynamics of Direct Dyes by Ca/CTS/FA CompositeInfluence of Catalysts with Different Templates on Direct Decomposition of NO in Cement Kiln ExhaustExtraction of Tungsten and Vanadium from the Spent SCR Catalyst by High Pressure Alkaline Leaching MethodPreparation of Tungsten Nanoparticles from Spent Tungsten Carbide by Molten Salt ElectrolysisEffect of Cement Raw Material and Oxygen Concentration on SNCR ReactionDifferent Precipitant Preparation of Nickel-Doped Mn/TiO2 Catalysts for Low-Temperature SCR of NO with NH3Energy Consumption and Carbon Emission Analysis of Natural Graphite Anode Material for Lithium BatteriesLife Cycle Assessment of Typical Rubber-Plastic Sponge Production in ChinaLife Cycle Assessment of Typical Glass Wool Production in ChinaLife Cycle Assessment of Nickel Production in ChinaEnvironment Impact Analysis of Natural Graphite Anode Material ProductionComparative Life Cycle Assessment of Autoclaved Concrete Blocks and Fired Blocks in ChinaSynthesis and Photocatalytic Activity of Ag Doped TiO2 NanofibersStructure and Surface Properties of Al3+- Modified SepioliteThe Rheological Properties of Crumb Rubber with Different Recycled Waste Tires Modified BindersA Comparative Life Cycle Assessment of Typical Foam Glass ProductionEffect of Layered Double Hydroxides with Different Particle Size on Properties of BitumenEffect of Different Media Aqueous Solution on Road Performance of Asphalt MixturesRheological Model and Viscoelasticity of Crumb Rubber Modified BitumenInvestigation on Rheological Characteristics of Fresh Cement MortarMechanical Properties of Self-Healing System in Cementitious Material with MicrocapsuleEffect on Structure and Properties of Cement-Based Materials by Polymer-Modified Metakaolin Slurry

Über Autor(innen)

Ed. Prof. Ya Fang Han