Buch, Englisch, 820 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1500 g
Buch, Englisch, 820 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1500 g
ISBN: 978-3-03785-943-8
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Foreword and Committees
Chapter 1: Biomaterials
Polyurethane Composite Membranes
Analysis of Bone Repair Tissue after Implantation of Biomaterials and Application of Vibratory Waves
Development of Titanium Dental Implants Using Techniques of Powder Metallurgy
Nanostructured Titanium Surface Obtained by Electrochemical Treatment
Mechanical and Morphological Behavior of Blends Obtained from Biopolymers (PLA/PLC)
Obtention and Characterization of Collagen and Chitosan Based Cements for Bone Regerneration. Part 1: Extraction and Characterization of Collagen
Development of Phosphate Glass Microspheres Containing Holmium for Selective Internal Radiotherapy
Chapter 2: Materials Characterization
Characterization and Study of the Moisture Expansion of Ceramic Blocks from Ceramic Masses Incorporated with Kaolin and Granite Wastes
Thermal Activation of Palygorskite at Different Temperatures
Physical and Microstructural Characterization of Cathode, Composite Cathode and Electrolyte Ceramics to ITSOFC
Application of Clays in Composition of Asphaltic Masses
Characterization of Asphalt Mix Formulated from Equations of Packing
Properties of High Temperature Sintered Clay Ceramic Added with Multi-Wire Sawn Granite Waste
Study of the Rheological Properties of PP/Clay Systems under Steady and Oscillatory Shear Flows
Weibull Analysis to Characterize the Diameter Dependence of Tensile Strength in Sugarcane Bagasse Fibers
Chacterization of Tensile Strength Dependence with Diameter of Sponge Gourd Fibers by Weibull Statistical Analysis
Effect of the Addition of TiO2 Nanoparticles on the Sinterability of a Glass Belonging to the LZSA Glass-Ceramic System
Preparation and Characterization of A Composite Obtained through Ti (IV) and Phosphoric Acid
Characterization of Epoxy Matrix Composites Incorporated with Sugarcane Bagasse Fibers
Obtaining of Polyamide 6/Calcined Nickel Ferrite Composite from Different Temperatures
Study of Heat Treatment on Phase Transformation of Ni-44,8 wt% Ti Ribbons Obtained by Melting Spinning
Morphological Characterization of Al-2.0wt%Si-2.5wt%Cu Alloy Produced by Direct Chill Casting and Electromagnetic Stirring for Thixoforming Process
Investigation of Microstructural Changes after Solution Annealing Treatment in a Duplex Stainless Steel
Study of the Tempering Effect in Phase Transformations of 13Cr1Ni0.15C and 13Cr2Ni0.1C Steels
Characterization of a AISI/SAE 4340 Steel in Different Microstructural Conditions
Microstructural Characterization of CP Steel Used in Automotive Industry
Microstructural Characterization of Dual and Multiphase Steels Applied to Automotive Industry
Heat Treatment as an Alternative to Brass Warping
Structure and Properties of Quenched and Cyclic Compressed Ti-Mo Alloys
Evaluation of the Thermal and Kinetic Behavior of the SS Obtained from the Combined Treatment of Liquid Leachate with Domestic Sewage in UASB Reactor
Spectroscopic and Diffractional Characteristics of Membranes and Polyamide 6/Regional Bentonite Clay Nanocomposites
Influence of the Addition of Polypropylene and Compatibilizer in PA6 Membranes Obtained by Phase Inversion
Structural and Thermomechanical Evaluation of Bionanocomposites Obtained from Biodegradable Polymers with a Organoclay
Tensile Strength of Polyester Composites Reinforced with Thinner Buriti Fibers
Calcination Influence on the Structure and Morphology of Zirconia Synthesized by Combustion Reaction
Chapter 3: Modeling
Analysis of the Influence of Liquid and of External Coating Material on the Quality of the Radiographic Image of Offshore Pipes Using Computational Modeling
Chapter 4: Cements
Eucalyptus Chip Ashes in Cementitious Composites
Influence of Curing Temperature on Metakaolin-Based Geopolymers
Chapter 5: Materials Degradetion
Evaluation of Vulcanized Elastomeric Composites after Ageing in Biodiesel
Electrodeposition of Polypyrrole Films on 2024 Aluminum Alloy in Phosphoric Acid Solution
Chapter 6: Ecological Materials
Preparation of Poly(Lactic Acid)/Bentonite Clay Bio-Nanocomposite
Technology for Coke Production in Tunnel Kiln from Compacted Coal Powder
Crystallization Kinetics of Iron Rich Glass-Ceramic Obtained from Waste of Steel Industry
Characterization of Banana Fibers Functional Groups by Infrared Spectroscopy
Infra-Red Spectroscopy Analysis of Malva Fibers
Izod Impact Tests in Polyester Matrix Composites Reinforced with Banana Fibers
Correlation between the Diameter and the Density of Coir Fiber Using the Weibull Statistic Methodology
Thermal Characterization of Polyester Composites Reinforced with Ramie Fibers
Dynamic-Mechanical Behavior of Malva Fiber Reinforced Polyester Matrix Composites
Tensile Properties of Epoxy Composites Reinforced with Continuous Sisal Fibers
Charpy Impact Tests in Epoxy Matrix Composites Reinforced with Continuous Sisal Fiber
Charpy Impact Test of Epoxy Matrix Composites Reinforced with Buriti Fibers
Dynamic-Mechanical Analysis of Polyester Composites Reinforced with Giant Bamboo (Dendrocalmus giganteus) Fiber
Tensile Strength of Polyester Matrix Composites Reinforced with Giant Bamboo (Dendrocalmus giganteus) Fibers
Bending Mechanical Behavior of Epoxy Matrix Reinforced with Jute Fiber
Formulation and Characterization of Polypropylene Composites Alkali Treated Bagasse Fiber
Characterization of Curaua Fibers by Infrared Spectroscopy
Izod Impact Tests with Polyester Matrix Reinforced with Buriti Fibers
Fabrication of Artificial Stone from Marble Residue by Resin Transfer Molding
Production of Synthetic Ornamental Marble as a Marble Waste Added Polyester Composite
Alternative Coconut Fiber Surface Treatments Methods for the Development of Polymeric Matrix Composites
Investigation to Obtain Polyols from Residual Frying Oil
Preparation of Biodegradable Polymer Nanocomposites and Vermiculite Clay by Melt Intercalation Technique
Chapter 7: Surface Engineering
Effect of Application of the Shot Peening Process in the Corrosion Resistance of the AISI 430 Ferritic Stainless Steel
Corrosion Resistance of Hybrid Films Applied on TiN Plate: Precursor Solution Acidified with Hydrochloric Acid
Chapter 8: Materials Science and Engineering
Particle Size Study of Smectite Clays from the City of Pedra Lavrada-PB
Influence of Speed of Processing in the Mechanical and Thermomechanical Properties of Polyamide 6 / Organoclay Nanocomposite
Chapter 9: Electrical Electronics and Optical Materials
Influence of TiO2 Crystalline Structure on Dielectric Resonator Properties from ZnO-Nb2O5-TiO2 Ceramic System for Use in Telecommunications
Chapter 10: Magnetic Materials
The Influence of Calcination Temperature in Ni-Zn Ferrite Doped with Al3+
Effect of Oxygen Content during Sintering on the Losses of MnZn Ferrites
Study of Temperature Sintering by Microwave Energy in Ferrites Ni0,5Zn0,5Fe2O4
Study of the Reproducibility of Ni-Zn Nanoferrite Obtained by Combustion Reaction
Synthesis, Characterization and Catalytic Performance of Nanoferrites Subjected to the Esterification Reaction
Evaluation of the Relationship between Crystallographic Texture and Magnetic Properties through the Magnetocrystalline Anisotropy Coefficient
Stoner-Wohlfarth Model for Nanocrystalline Anisotropic Sm2Co17 Magnets
Nucleation as Coercivity Mechanism in NdFeB Magnets
Chapter 11: Nanostructured Materials
Strontium Titanate Ceramics Obtained by Conventional and Microwave Methods
Effect of Microwave Power in Obtaining Ferrite Nanopowders Synthesized by Combustion
Influence of Clay Content in Membrane Morphology of Polymer Polyamide 6.6/Montmorillonite Clay
Obtaining of Polyamide 6.6 Plane Membrane Application in Oil-Water Separation
Nanocomposites Obtained by Montmorilonite Clay Additivation in P3 (HB-8%HV)
Evaluation of Attapulgite Clay Content from Piaui´ in Sorption Characterization of Water in the Polyester Matrix Composites
Synthesis and Characterization of Biocompatible Fe3O4 for Use in Cell Hyperthermia
Microstructural Evolution of a F138 Austenitic Stainless Steel after Deformation by ECAP and HPT
Morphological Comparison of PEI and PES Nanocomposite Membranes with Bentonite Clay
Analysis of the Efficiency of Surface Treatment of Bentonite Clay for Application in Polymeric Membranes
Study of Morphology Membrane of Polymeric Nanocomposites Obtained by Phases Inversion
Chapter 12: Materials Power Generation
La, Sr and Co Based Coatings Obtained on Ferritic Stainless Steel by Dip-Coating Technique
Platinum-Free Catalysts for Alkaline Polymer Electrolyte Fuel Cells
Evaluation of the Thermal Stability of Biofuel Obtained from Oil Plant Pyrolysis and Animal Fat
Chapter 13: Processing
Processing of Silicas Formed by Slip Casting
Production of Li2O-ZrO2-SiO2-Al2O3 (LZSA) Glass-Ceramic Foams by Aeration and Polymerization of Suspension
Microstructure Evolution during Fabrication of Ni-Ti-Nb SMA Wires
Chapter 14: Mechanical Properties
Influence of Quartzite Residues on the Strength of Added Red Clay Ceramics
Employment of Response Surface Methodology for Optimization of the Portland Cement Mechanical Resistance
Effect Polymeric Modifier (Biostrength B150), and Organoclay on Properties of Poly(lactic acid) - PLA
Study on Physical and Mechanical Properties of PHB Biocomposites with Rice Hull Ash
Alumina Matrix Composites Produced by Water-Based Tape Casting
Evaluation of Concretes Incorporated with Fluorescent Lamp Glass Waste
Incorporation of Granite Waste from Diamond Wire Sawing Process into Cement Matrix Concrete
Evaluation of the Physico-Mechanical Properties of Concretes Containing Pet and Crushed Sand
Study of Mechanical Behavior of Components of Duplex Steel by Using of X-Ray Diffraction Technique
Mechanichal Properties of DGEBA/TEPA Modified Epoxy Resin
Influence of Poly(Vinyl Butyral) on the Dynamic-Mechanical and Mechanical Properties of Polypropylene/Wood Flour Composites
Physical-Mechanical Behaviour of a LZS Glass-Ceramic
Chapter 15: Recycling
Recycling of Benefited Blast Furnace Sludge into Red Clay Ceramic
Analysis of the Properties of Asphaltic Concrete Using Recycled Aggregates of CDW
Physical-Mechanical Characteristics in Masses for White Ceramics Obtained with Flat Glass Waste
Reuse of Special Glass Waste Like a Flux in Masses for White Ceramics
Recycling of Concentration Tailings of Iron Ore for the Production of Concrete Block (Pavers)
Formulation of Ceramic Glazes by Recycling Waste Glass
Characterization of a Water Clearing Treatment Residue and Its Application as Clay Ceramic Addition
Clay Ceramic Incorporated with Granite Waste Obtained from Diamond Multi-Wire Sawing Technology
Kaolin Residue as an Alternative Binder for Grout Seat and Revetment
Preparation of Polyamide 6/PE-g-MA/Compound by Recycled Rubber (SBRr) Blends
Development of Ceramic Refractory Filters from Alternative Mineral Source: Rheological Characterization
Chapter 16: Synthesis
Citrate-Hydrothermal Synthesis and Electrochemical Characterization of La0.6Sr0.4Co0.2Fe0.8O3 for Intermediate Temperature SOFC
Evaluation of Structural and Morphological Characteristics of the System Ni1-xZnxFe2O4 Obtained by Combustion Reaction
Combustion Synthesis of the MgAl2O4 Using Glycerin from the Production of Biodiesel
Effect of Reaction Temperature in the Alumina Preparation by Combustion in a Muffle Furnace
ZnAl2O4/Chitosan Films and Evaluation of the Influence of ZnAl2O4 Filler on the Films Morphology, Structure and Thermal Properties
Chapter 17: Micellaneous
Characterization of a Granite Waste for Clay Ceramic Addition
Study of Nanoferrites Ni0,5Zn0,5Fe2O4 and Ni0,1Cu0,4Zn0,5Fe2O4 as Catalysts in the Methyl Transesterification of Soybean Oil
Use of Ash from Coffee Wood into Clayey Ceramic
Microstructural Analysis of Clay Ceramic Added with Blast Furnace Sludge
Study of Compatibility between Organoclays and Organic Dispersant Media through Foster Swelling
Effects of Mould Temperature in Squeeze Casting of Zamak 5
Thermal Treatment Related Structure and Property Changes in a TiNi Alloy Presenting Shape Memory Effect
Magnetic Modified Natural Polymers for Biotechnological Application
Artificial Neural Network Assisted Digital Image Processing to Determine the Hydrophobicity of Polymeric Materials
Adsorption of the Blue Dye Reactive Remazol RN in Cellulosic Materials
Porous Ceramic Structures Obtained from Calcium Carbonate as Pore Generating Agent
