Hotza / de Oliveira | 20th Brazilian Conference on Materials Science and Engineering | Sonstiges | 978-3-03795-638-0 | sack.de

Sonstiges, Englisch, Band Volumes 775-776, 820 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g

Reihe: Materials Science Forum

Hotza / de Oliveira

20th Brazilian Conference on Materials Science and Engineering


Erscheinungsjahr 2014
ISBN: 978-3-03795-638-0
Verlag: Trans Tech Publications

Sonstiges, Englisch, Band Volumes 775-776, 820 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g

Reihe: Materials Science Forum

ISBN: 978-3-03795-638-0
Verlag: Trans Tech Publications


Collection of selected, peer reviewed papers from the 20th Brazilian Conference on Materials Science and Engineering (CBECIMAT), November 4-8, 2012, Joinville, Santa Catarina.
Volume is indexed by Thomson Reuters CPCI-S (WoS).
The 132 papers are grouped as follows:
Chapter 1: Biomaterials;
Chapter 2: Materials Characterization;
Chapter 3: Modeling;
Chapter 4: Cements;
Chapter 5: Materials Degradetion;
Chapter 6: Ecological Materials;
Chapter 7: Surface Engineering;
Chapter 8: Materials Science and Engineering;
Chapter 9: Electrical Electronics and Optical Materials;
Chapter 10: Magnetic Materials;
Chapter 11: Nanostructured Materials;
Chapter 12: Materials Power Generation;
Chapter 13: Processing;
Chapter 14: Mechanical Properties;
Chapter 15: Recycling;
Chapter 16: Synthesis;
Chapter 17: Micellaneous
Hotza / de Oliveira 20th Brazilian Conference on Materials Science and Engineering jetzt bestellen!

Weitere Infos & Material


Polyurethane Composite MembranesAnalysis of Bone Repair Tissue after Implantation of Biomaterials and Application of Vibratory WavesDevelopment of Titanium Dental Implants Using Techniques of Powder MetallurgyNanostructured Titanium Surface Obtained by Electrochemical TreatmentMechanical and Morphological Behavior of Blends Obtained from Biopolymers (PLA/PLC)Obtention and Characterization of Collagen and Chitosan Based Cements for Bone Regerneration. Part 1: Extraction and Characterization of CollagenDevelopment of Phosphate Glass Microspheres Containing Holmium for Selective Internal RadiotherapyCharacterization and Study of the Moisture Expansion of Ceramic Blocks from Ceramic Masses Incorporated with Kaolin and Granite WastesThermal Activation of Palygorskite at Different TemperaturesPhysical and Microstructural Characterization of Cathode, Composite Cathode and Electrolyte Ceramics to ITSOFCApplication of Clays in Composition of Asphaltic MassesCharacterization of Asphalt Mix Formulated from Equations of PackingProperties of High Temperature Sintered Clay Ceramic Added with Multi-Wire Sawn Granite WasteStudy of the Rheological Properties of PP/Clay Systems under Steady and Oscillatory Shear FlowsWeibull Analysis to Characterize the Diameter Dependence of Tensile Strength in Sugarcane Bagasse FibersChacterization of Tensile Strength Dependence with Diameter of Sponge Gourd Fibers by Weibull Statistical AnalysisEffect of the Addition of TiO2 Nanoparticles on the Sinterability of a Glass Belonging to the LZSA Glass-Ceramic SystemPreparation and Characterization of A Composite Obtained through Ti (IV) and Phosphoric AcidCharacterization of Epoxy Matrix Composites Incorporated with Sugarcane Bagasse FibersObtaining of Polyamide 6/Calcined Nickel Ferrite Composite from Different TemperaturesStudy of Heat Treatment on Phase Transformation of Ni-44,8 wt% Ti Ribbons Obtained by Melting SpinningMorphological Characterization of Al-2.0wt%Si-2.5wt%Cu Alloy Produced by Direct Chill Casting and Electromagnetic Stirring for Thixoforming ProcessInvestigation of Microstructural Changes after Solution Annealing Treatment in a Duplex Stainless SteelStudy of the Tempering Effect in Phase Transformations of 13Cr1Ni0.15C and 13Cr2Ni0.1C SteelsCharacterization of a AISI/SAE 4340 Steel in Different Microstructural ConditionsMicrostructural Characterization of CP Steel Used in Automotive IndustryMicrostructural Characterization of Dual and Multiphase Steels Applied to Automotive IndustryHeat Treatment as an Alternative to Brass WarpingStructure and Properties of Quenched and Cyclic Compressed Ti-Mo AlloysEvaluation of the Thermal and Kinetic Behavior of the SS Obtained from the Combined Treatment of Liquid Leachate with Domestic Sewage in UASB ReactorSpectroscopic and Diffractional Characteristics of Membranes and Polyamide 6/Regional Bentonite Clay NanocompositesInfluence of the Addition of Polypropylene and Compatibilizer in PA6 Membranes Obtained by Phase InversionStructural and Thermomechanical Evaluation of Bionanocomposites Obtained from Biodegradable Polymers with a OrganoclayTensile Strength of Polyester Composites Reinforced with Thinner Buriti FibersCalcination Influence on the Structure and Morphology of Zirconia Synthesized by Combustion ReactionAnalysis of the Influence of Liquid and of External Coating Material on the Quality of the Radiographic Image of Offshore Pipes Using Computational ModelingEucalyptus Chip Ashes in Cementitious CompositesInfluence of Curing Temperature on Metakaolin-Based GeopolymersEvaluation of Vulcanized Elastomeric Composites after Ageing in BiodieselElectrodeposition of Polypyrrole Films on 2024 Aluminum Alloy in Phosphoric Acid SolutionPreparation of Poly(Lactic Acid)/Bentonite Clay Bio-NanocompositeTechnology for Coke Production in Tunnel Kiln from Compacted Coal PowderCrystallization Kinetics of Iron Rich Glass-Ceramic Obtained from Waste of Steel IndustryCharacterization of Banana Fibers Functional Groups by Infrared SpectroscopyInfra-Red Spectroscopy Analysis of Malva FibersIzod Impact Tests in Polyester Matrix Composites Reinforced with Banana FibersCorrelation between the Diameter and the Density of Coir Fiber Using the Weibull Statistic MethodologyThermal Characterization of Polyester Composites Reinforced with Ramie FibersDynamic-Mechanical Behavior of Malva Fiber Reinforced Polyester Matrix CompositesTensile Properties of Epoxy Composites Reinforced with Continuous Sisal FibersCharpy Impact Tests in Epoxy Matrix Composites Reinforced with Continuous Sisal FiberCharpy Impact Test of Epoxy Matrix Composites Reinforced with Buriti FibersDynamic-Mechanical Analysis of Polyester Composites Reinforced with Giant Bamboo (Dendrocalmus giganteus) FiberTensile Strength of Polyester Matrix Composites Reinforced with Giant Bamboo (Dendrocalmus giganteus) FibersBending Mechanical Behavior of Epoxy Matrix Reinforced with Jute FiberFormulation and Characterization of Polypropylene Composites Alkali Treated Bagasse FiberCharacterization of Curaua Fibers by Infrared SpectroscopyIzod Impact Tests with Polyester Matrix Reinforced with Buriti FibersFabrication of Artificial Stone from Marble Residue by Resin Transfer MoldingProduction of Synthetic Ornamental Marble as a Marble Waste Added Polyester CompositeAlternative Coconut Fiber Surface Treatments Methods for the Development of Polymeric Matrix CompositesInvestigation to Obtain Polyols from Residual Frying OilPreparation of Biodegradable Polymer Nanocomposites and Vermiculite Clay by Melt Intercalation TechniqueEffect of Application of the Shot Peening Process in the Corrosion Resistance of the AISI 430 Ferritic Stainless SteelCorrosion Resistance of Hybrid Films Applied on TiN Plate: Precursor Solution Acidified with Hydrochloric AcidParticle Size Study of Smectite Clays from the City of Pedra Lavrada-PBInfluence of Speed of Processing in the Mechanical and Thermomechanical Properties of Polyamide 6 / Organoclay NanocompositeInfluence of TiO2 Crystalline Structure on Dielectric Resonator Properties from ZnO-Nb2O5-TiO2 Ceramic System for Use in TelecommunicationsThe Influence of Calcination Temperature in Ni-Zn Ferrite Doped with Al3+Effect of Oxygen Content during Sintering on the Losses of MnZn FerritesStudy of Temperature Sintering by Microwave Energy in Ferrites Ni0,5Zn0,5Fe2O4Study of the Reproducibility of Ni-Zn Nanoferrite Obtained by Combustion ReactionSynthesis, Characterization and Catalytic Performance of Nanoferrites Subjected to the Esterification ReactionEvaluation of the Relationship between Crystallographic Texture and Magnetic Properties through the Magnetocrystalline Anisotropy CoefficientStoner-Wohlfarth Model for Nanocrystalline Anisotropic Sm2Co17 MagnetsNucleation as Coercivity Mechanism in NdFeB MagnetsStrontium Titanate Ceramics Obtained by Conventional and Microwave MethodsEffect of Microwave Power in Obtaining Ferrite Nanopowders Synthesized by CombustionInfluence of Clay Content in Membrane Morphology of Polymer Polyamide 6.6/Montmorillonite ClayObtaining of Polyamide 6.6 Plane Membrane Application in Oil-Water SeparationNanocomposites Obtained by Montmorilonite Clay Additivation in P3 (HB-8%HV)Evaluation of Attapulgite Clay Content from Piaui? in Sorption Characterization of Water in the Polyester Matrix CompositesSynthesis and Characterization of Biocompatible Fe3O4 for Use in Cell HyperthermiaMicrostructural Evolution of a F138 Austenitic Stainless Steel after Deformation by ECAP and HPTMorphological Comparison of PEI and PES Nanocomposite Membranes with Bentonite ClayAnalysis of the Efficiency of Surface Treatment of Bentonite Clay for Application in Polymeric MembranesStudy of Morphology Membrane of Polymeric Nanocomposites Obtained by Phases InversionLa, Sr and Co Based Coatings Obtained on Ferritic Stainless Steel by Dip-Coating TechniquePlatinum-Free Catalysts for Alkaline Polymer Electrolyte Fuel CellsEvaluation of the Thermal Stability of Biofuel Obtained from Oil Plant Pyrolysis and Animal FatProcessing of Silicas Formed by Slip CastingProduction of Li2O-ZrO2-SiO2-Al2O3 (LZSA) Glass-Ceramic Foams by Aeration and Polymerization of SuspensionMicrostructure Evolution during Fabrication of Ni-Ti-Nb SMA WiresInfluence of Quartzite Residues on the Strength of Added Red Clay CeramicsEmployment of Response Surface Methodology for Optimization of the Portland Cement Mechanical ResistanceEffect Polymeric Modifier (Biostrength B150), and Organoclay on Properties of Poly(lactic acid) - PLAStudy on Physical and Mechanical Properties of PHB Biocomposites with Rice Hull AshAlumina Matrix Composites Produced by Water-Based Tape CastingEvaluation of Concretes Incorporated with Fluorescent Lamp Glass WasteIncorporation of Granite Waste from Diamond Wire Sawing Process into Cement Matrix ConcreteEvaluation of the Physico-Mechanical Properties of Concretes Containing Pet and Crushed SandStudy of Mechanical Behavior of Components of Duplex Steel by Using of X-Ray Diffraction TechniqueMechanichal Properties of DGEBA/TEPA Modified Epoxy ResinInfluence of Poly(Vinyl Butyral) on the Dynamic-Mechanical and Mechanical Properties of Polypropylene/Wood Flour CompositesPhysical-Mechanical Behaviour of a LZS Glass-CeramicRecycling of Benefited Blast Furnace Sludge into Red Clay CeramicAnalysis of the Properties of Asphaltic Concrete Using Recycled Aggregates of CDWPhysical-Mechanical Characteristics in Masses for White Ceramics Obtained with Flat Glass WasteReuse of Special Glass Waste Like a Flux in Masses for White CeramicsRecycling of Concentration Tailings of Iron Ore for the Production of Concrete Block (Pavers)Formulation of Ceramic Glazes by Recycling Waste GlassCharacterization of a Water Clearing Treatment Residue and Its Application as Clay Ceramic AdditionClay Ceramic Incorporated with Granite Waste Obtained from Diamond Multi-Wire Sawing TechnologyKaolin Residue as an Alternative Binder for Grout Seat and RevetmentPreparation of Polyamide 6/PE-g-MA/Compound by Recycled Rubber (SBRr) BlendsDevelopment of Ceramic Refractory Filters from Alternative Mineral Source: Rheological CharacterizationCitrate-Hydrothermal Synthesis and Electrochemical Characterization of La0.6Sr0.4Co0.2Fe0.8O3 for Intermediate Temperature SOFCEvaluation of Structural and Morphological Characteristics of the System Ni1-xZnxFe2O4 Obtained by Combustion ReactionCombustion Synthesis of the MgAl2O4 Using Glycerin from the Production of BiodieselEffect of Reaction Temperature in the Alumina Preparation by Combustion in a Muffle FurnaceZnAl2O4/Chitosan Films and Evaluation of the Influence of ZnAl2O4 Filler on the Films Morphology, Structure and Thermal PropertiesCharacterization of a Granite Waste for Clay Ceramic AdditionStudy of Nanoferrites Ni0,5Zn0,5Fe2O4 and Ni0,1Cu0,4Zn0,5Fe2O4 as Catalysts in the Methyl Transesterification of Soybean OilUse of Ash from Coffee Wood into Clayey CeramicMicrostructural Analysis of Clay Ceramic Added with Blast Furnace SludgeStudy of Compatibility between Organoclays and Organic Dispersant Media through Foster SwellingEffects of Mould Temperature in Squeeze Casting of Zamak 5Thermal Treatment Related Structure and Property Changes in a TiNi Alloy Presenting Shape Memory EffectMagnetic Modified Natural Polymers for Biotechnological ApplicationArtificial Neural Network Assisted Digital Image Processing to Determine the Hydrophobicity of Polymeric MaterialsAdsorption of the Blue Dye Reactive Remazol RN in Cellulosic MaterialsPorous Ceramic Structures Obtained from Calcium Carbonate as Pore Generating Agent


Ihre Fragen, Wünsche oder Anmerkungen
Vorname*
Nachname*
Ihre E-Mail-Adresse*
Kundennr.
Ihre Nachricht*
Lediglich mit * gekennzeichnete Felder sind Pflichtfelder.
Wenn Sie die im Kontaktformular eingegebenen Daten durch Klick auf den nachfolgenden Button übersenden, erklären Sie sich damit einverstanden, dass wir Ihr Angaben für die Beantwortung Ihrer Anfrage verwenden. Selbstverständlich werden Ihre Daten vertraulich behandelt und nicht an Dritte weitergegeben. Sie können der Verwendung Ihrer Daten jederzeit widersprechen. Das Datenhandling bei Sack Fachmedien erklären wir Ihnen in unserer Datenschutzerklärung.