Sonstiges, Englisch, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Sonstiges, Englisch, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
ISBN: 978-3-0357-1911-6
Verlag: Trans Tech Publications
The papers which make up this volume reflect the very diverse nature of nondestructive evaluation; covering as they do topics ranging from traditional NDE to newly developing NDE methods such as structural health monitoring; where nondestructive technologies are rapidly progressing by integrating emerging technologies from various fields.
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Ultrasonic Nondestructive Measurement Systems ? Models and MeasurementsInverse Models and Implications for NDEApplication of Modified Grid-Based Approach for Auto Mesh Generation of IT-Related ProductsApplication of the Refined Mesh Method for the Strength Estimation around OpeningsFinite Element Analysis of an Induced Current Potential Drop Method for the Defect Detection of Railway AxlesAnalysis of Residual Stress Components Developed in Cold Drawing by Finite Element MethodEvaluation of the J Integral of a Surface Crack by the Three-dimensional Local Hybrid MethodExamination of Accuracy of the Singular Stress Field Near a Crack-Tip by Digital Image CorrelationLimit Loads for Circumferential Cracked Pipe Bends under In-Plane BendingA Micromechanical Model for Ductile Fracture of API X65Ball SAW Sensors for Safety and Reliability of Fuel Cell TechnologiesOptically Encoded Smart Dust from DBR Porous SiliconDevelopment of Biaxial Servo Controlled Fatigue Testing SystemSeparation and Concentration of Particles in Fluid Using Ultrasonic Standing WaveMeasurement of Thermal Expansion Coefficients of Thin Film of Different Organic Coatings by ShearographyDevelopment of Novel Optical Fiber AE Sensor with Multi-Sensing FunctionMeasurement for In-Plane Displacement of Tensile Plates with Through-Thickness Circular Hole and Partly Through-Thickness Circular Hole by Use of Speckle InterferometryTest and Evaluation of a Newly Built Multi-Purpose Transmission Type PolariscopeThe Detection and Imaging of Internal Defect Using ESPI-Based Strain AnalysisAn Optical Method for the Detection of In-Plane Motion of Acoustic Waves Propagating in SolidsQuantitative Vibration Amplitude Measurement Using Stroboscopic Phase Shifting ESPISurface Roughness Measurement by Using Interferometer and Active Interferometer StabilizationSuppressing Technique of the Antisymmetric Mode by the Superposition of Lamb Waves Generated by Two Laser Beams in a Thin PlateAbsolute Single-Mode Lamb Wave Generation by Laser in a Thin PlateInfluence of Shearing Amount on Detecting Crack-Shaped Internal Defect by ShearographyOut-of-Plane Micro-ESPI System for Measurement of Mechanical Properties of Film MaterialsResidual Stress Evaluation of Thin Film Using Strip Bending TestGas Electron Multipliers for Potential Applications to Digital RadiographyA Correction of Geometric Error of Nano-Indenter Using Atomic Force Microscope and Finite Element MethodDesign and Characterization of Capacitive Micromachined Ultrasonic TransducerNovel Test Procedure of Tensile Test for MEMS MaterialsStructural Health Monitoring Based on Electrical Impedance of a Carbon Nanotube NeuronPZT-Induced Lamb Waves and Pattern Recognition for On-Line Health Monitoring of Jointed Steel PlatesCharacteristics of Fiber Bragg Grating Sensors with Various Grating Lengths Embedded in Composite MaterialsKnee Joint Analysis for Optimal Ligament Surgical Reconstruction Using Three Dimensional Motion ModelExperimental Study of Evaluating Bio-Mechanical Characteristics of Cushioning System Using Nano-Shock Absorption PocketPerformance of Electro-Active Papers Made with Cellulose and Multi-Walled Carbon NanotubesExperimental and Analytical Studies for Impedance-Based Smart Health Monitoring of Concrete StructuresA Study on Damage Behavior and Strength of Smart Material under Low Temperature Using Acoustic EmissionSurface Monitoring Technique for Fatigue Effect of Shape Memory Alloys(SMAs)Strain Monitoring and Damage Detection of a Filament Wound Composite Pressure Tank Using Embedded Fiber Bragg Grating SensorsNumerical Modeling of Shape Memory Alloy Thin Film Actuators and Their ApplicationsWireless Instrumentation for Monitoring of Smart StructuresCohesive Zone Parameters for the Interface between NiTi Shape Memory Alloy and CFRPVelocity Feedback with a Non-Collocated Pair of Sensor and Actuator for Tip Vibration Suppression of a BeamBiologically Inspired Smart Sensor for Acoustic Emission DetectionDynamic Characteristics of Novel Ionic-Polymer-Metal-CompositesApplication of Fiber Optic BOTDA Sensor for Fire Detection in a Building Reliability-Based Assessment of Bridges Using Long-Term Monitoring DataFatigue Reliability Analysis of a Suspension Bridge Using Long-Term Monitoring DataEmbedded Fibre Bragg Grating Sensors for Internal Fatigue Damage Monitoring in Polymeric CompositesOn-Line NDE and Structural Health Monitoring for Advanced ReactorsUltrasonic Estimation of Clamping Force in High-Tension BoltsDevelopment of Smart Stress Memory Sensor Using AE Kaiser EffectAssessment Model for the Safety and Serviceability of Steel Beams Using Terrestrial LiDARSimultaneous Monitoring of Acoustic Emission and Corrosion Potential Fluctuation for Mechanistic Study of Chloride Stress Corrosion CrackingDevelopment of Heat Resistant AE Monitoring System Using Optical Fiber SensorMonitoring of a Steel Plate Girder Railroad Bridge with Fiber Bragg Grating SensorsFE Model Updating for Health Monitoring of Structures and its Experimental Verification by Damage DetectionOptimal Accelerometer Locations for Structural Health Monitoring Using Time-Domain System IdentificationContribution of Three-Dimensional Trabecular Bone Microstructure of the Proximal Femur to its Mechanical Properties as Assessed by Micro-Finite Element AnalysisIntegrity Assessment for Beam-Like Structures by Continuous Wavelet TransformFatigue Crack Growth Monitoring by Optical Fiber Sensors in Smart Composite Patch RepairsStructural Health Monitoring for Carbon Fiber/Carbon Nanotube (CNT)/Epoxy Composite SensorMaking Sense of Non-Destructive Evaluation Data with an Artificial Intelligence ApproachAssessment of Structural Integrity for a Concrete Runway by Seismic TechniquesStructural Integrity Assessment of Tunnel Concrete Lining by the Resonance Search TechniqueThe Effect of Joint Conditions on the Longitudinal and Flexural Wave Velocities of a Rock MassA Study on the Elastic Wave Propagation in the Telecommunication Pole Having Different Subsurface End ConditionModified Surface Wave Velocity Measurement Technique in ConcreteNondestructive Curing Monitoring of Early-Age Concrete Using Rayleigh Wave VelocityAssessment of Fire-Induced Damage on Concrete Segment of Shield TBM TunnelGeomechanical Characterization of Faulted Rock Materials in KoreaEvaluation of Residual and Actual Stress Levels of Steel Columns in Existing Building Structures due to Working LoadsImprovement of the Impact-Echo Method for the Higher Reliability in the Structural Integrity AssessmentAssessment of the Integrity of Piles by Impedance Log TechniqueExperimental Study of Sliding Load According to Changes of Axial Bolt Clamping Force of H-Beam Affected by Pure BendingDevelopment of Imaging Technique for Evaluating the RC Plate Containing Epoxy-Repaired DelaminationNon-Contact SWP Stability Estimation Using Laser-Ultrasonic WaveDamage Assessment of Reinforced Concrete Beams by Complex Ratios of Transfer FunctionsNon-Destructive Pile Integrity Test Using HWAW MethodEffect of Confining Pressure on Modeling High Early Strength Concrete under Uniaxial LoadingAssessment of Local Damage Level in Engineered Cementitious Composites (ECC) Using Stress Wave PropagationMagnetoelastic Measurements of Steel Stress under Uniaxial LoadingCalibration of an Impact Device and Its Application to the Normalized Spectral Analysis of Impact-Echo TestsAnalytical Evaluation of Plastic Resistance of Column Base Connection Using Convex Set TheoryDetection of Debonding in Concrete Members Retrofitted with FRP Using Electromagnetic and Ultrasonic MethodsCrack Detection by Static Measurement in Steel BeamsA Study on the Diagnosis Method of Concrete Structures of School Buildings Using Non-Destructive Tests Based on Stress WavesRemote Sensing of Bridge Displacement Using Digital Image Processing TechniquesNondestructive Characterization Hydrogen-Charged Zircaloy with a Laser Ultrasound TechniqueComparison of Absolute and Differential ECT Signal Characteristics Obtained at Tubesheet and Tube Expansion AreaPrediction and Analysis of ECT Signals due to Tube Defects near Support Plate in Steam GeneratorA New Eddy Current 3-D Profilometry for a Quantitative Measurement of Geometric Anomaly in Steam Generator Tubes of Nuclear Power PlantsWear Transitions of Tube-Support Materials for a Nuclear Steam Generator through Sliding Wear Test and Fretting Wear TestDC Potential-Drop Technique for the Evaluation of 3-D Back-Wall Cracks in Steel StructuresDevelopment of On-Line Health Monitoring System for Pipes in Nuclear Power PlantsIntegrated Approach for On-Line Condition Monitoring of PipingEvaluation of Motorized Rotating Pancake Coil Probe Signals Simulated by Numerical Analysis in Steam Generator TubesFault Detection Using Acoustic Methods for the Sodium-Water Reaction Monitoring in a Liquid Metal ReactorInvestigation on Multifrequency Eddy Current Testing Signal Analysis for Nondestructive Inspection of Steam Generator TubesEffects of 3D Eddy Current Finite Element Formulations on ECT SignalsWater Thickness Gaging in a Bellows Tube Using Special UT Shoes & an Immersion Ultrasonic SystemResearch on the Method for Drill Pipe Thread InspectionApplication of Ultrasonic Test on Creep-Fatigue Life EvaluationEvaluation of Fracture Toughness for Power Plant Materials Using Continuous Indentation TechniqueThe Evaluation of Material Degradation in Modified 9Cr-1Mo Steel by Electrochemical and Magnetic Property AnalysisEvaluation of Hidden Corrosion in a Thin Plate Using a Non-Contact Guided Wave TechniquePrediction of Ultrasonic Signals Captured from a Side-Drilled Hole Using a Rectangular TransducerA Model to Predict Phased Array Ultrasonic Testing Signals from a Flat-Bottomed Hole in Two MediumMulti-Coil Eddy Current Probe for the Detection of Circumferential Cracks in TubingThermo-Mechanical Fatigue of the Nickel Base Superalloy IN738LC for Gas Turbine BladesNon-Contact Ultrasonic Inspection Technology of Fillet Weldments MonitoringFatigue Life Prediction of Heat-Aging Vulcanized Natural RubberEvaluation for Toughness Degradation of 2.25Cr-1Mo Steel Using Magnetic Property Measurement MethodThe Application of Nondestructive Methods for Degradation Evaluation of Modified 9Cr-1Mo SteelA Study on Material Degradation in Carbon Steel for Pressure Vessel at 179?CEvaluation of the Ductile-Brittle Transition Behaviour of Aging Specimens by the Fracture Toughness TestA Study on Estimation of the Pipe Fracture CharacteristicsIdentification of AE Source in Corrosion ProcessSemi-Parametric Learning for Classification of Pitting Corrosion Detected by Acoustic EmissionEffect of Sulfuric Acid Concentration on Acoustic Emission Signals in Uniform-CorrosionDevelopment of a Novel Rod Compression Technique for Characterizing Local Surface StrengthAssessment of Mechanical Degradation in Pressure Vessel Steel by Morphological Analysis of CarbidesCreep Rupture Studies of Zirlo Tubing Using Ring Tensile SpecimenFracture Toughness with Thermal Aging in CF8M/SA508 WeldsSimultaneous Measurement of Longitudinal and Transverse Waves Velocities Employing Spherically Focused Acoustic TransducerCharacterization of Material Degradation in Epoxy Film Based on Scanning Acoustic Microscopy (SAM)Assessment of Insulation Degradation in Rotating MachinesNondestructive Detection of Crack and Delamination of Ceramics Coating on SUS304 Stainless Steel Using ESPI MethodExperimental Study on the Fatigue Strength of the Bogie Frame for Tilting Railway VehiclesStudy for Evaluation of Surface Cracks on Tribological Coatings Failure in Contacting SystemsFatigue Crack Propagation of Magnesium Alloy and Aluminum Alloy in Biaxial Stress FieldsExperimental Study on the Structural Safety Assessment of the Tilting Bolster FrameEvaluation of Corrosion Fatigue Characteristics of Artificially Sensitized Austenitic Stainless Steel Using the DCPD MethodCorrosion Fatigue Characteristics of Artificially Degraded CF8A Steel in 3.5 WT.% NaCl SolutionFatigue Crack Propagation Life of Welded Joints Related to the Statistical Characteristics of Multiple Surface CracksThe Effect of Cavity on the Creep Fracture in P92 and P122 Steels and Its Detection by Intelligent Phased Array UltrasoundProcess Integration of Fatigue Analysis for Welded Bogie FramesEvaluation of SCC Distribution by Means of Focusing Ultrasonic Angle BeamEvaluation of High Temperature Characteristics in Gas Turbine BladesEvaluation of Tensile Properties and Bending-Induced Residual Stress of Slender Copper PipeThe Contact Fatigue Life Evaluation According to Contact Surface RemovalSensitive Ultrasonic NDE of Tightly Closed Small Cracks in Carbon Steel StructuresFailure Analysis of Railway Wheel TreadExperimental Study of High-Velocity Impact Characteristic of Mg Alloy Using Ballistic RangeA Study on the Improvement of Durability of a Drive Plate by Investigating the Optimum Peening IntensityA Study on the Improvement of Durability of Gear Steel by Shot PeeningBurst Pressure Estimation of Steam Generator Tubes Based on Fracture Mechanics AnalysesFluid Structure Interaction Analysis on Wall Thinned PipesAnalysis of Fatigue Crack Growth in Weld Specimen Using Three-Dimensional Cohesive Zone ModelEffect of Local Strain on Low Cycle Fatigue Measured by ESPI SystemInfluence of Inclusion on Deformation of Crack Tip in Rotating Disc by Photoelasticity and Method of CausticsStudy on Stress Intensity Factor under Torsion Load of Double Column for Two Dissimilar MaterialsTribological Performance of Multi-Walled Carbon Nanotubes in Mineral Oils under Boundary Lubricated SlidingResidual Stress Evaluation and Its Effects on the Fatigue Life of an Autofrettaged TubeThe Evaluation of Fretting Fatigue Life for Inconel 600 and 690 AlloyLife Prediction of High Pressure Steam Turbine RotorFinite Element Analysis of the Stress Intensity Factor and the Residual Stress by Cold Expansion Method in CT SpecimenFailure Analysis of Reinforced Concrete Bridge Column Using Cohesive and Adhesive InterfacesEffect of Biaxial Static Loads on Fatigue Crack Propagation Behavior under Cyclic Tensile and Torsional LoadingPlastic Limit Loads for Through-Wall Cracked Pipes Using Finite Element Limit AnalysisDegradation Depth Measurement of Polycarbonate Used by Castfilm MethodMixed-Mode Fatigue Crack Growth in Orthotropic Steel DecksStudy on the Control and Fabrication of Thermal Fatigue Crack for Reliability Enhancement of NDT in Reactor Coolant SystemApplication of Laser-Generated Ultrasound for Evaluation of Thickness Reduction in Carbon Steel PipesA Study on Ultrasonic Testing for Nondestructive Evaluation of Thermal Fatigue Crack in PipelinesUniform Model and Fracture Criteria of Annularly Breached Bars under BendingAnti-Fatigued Criterion of Annularly Breached Spindle on Mechanical DesignStructural Health Monitoring of Composite Structures Using Guided Lamb WavesDispersion Behaviors of Wedge Waves Propagating Along Wedges with Bilinear Cross SectionsNumerical and Experimental Studies on the Scattering of Lamb Waves in a Bent PlateTime Reversal Technique for Ultrasonic Guided Wave InspectionComparison of an Array of EMATs Technique and a Magnetostrictive Sensor Technique for a Guided Wave Inspection of a PipeA Computational Tool for Defect Analysis in Rail with Ultrasonic Guided WavesA Characteristic of Scattering Patterns from Defect in a RailSH Guided Wave Scattering in a Structure with Thickness VariationA Wall Thinning Detection and Quantification Based on Guided Wave Mode Conversion FeaturesLong Range Ultrasonic Guided Wave Technique for Inspection of PipesUltrasonic Guided-Wave Mode Identification in Pipe by Using Air-Coupled Transducer and Time-Frequency AnalysisUsefulness of Thermography in Evaluation of Patients with FBSS Following Radiofrequency Dorsal Root Ganglion LesioningRole of Intraoperative Infrared Thermography for Prediction of Successful Percutaneous Radiofrequency Sympathectomy for Palmar HyperhidrosisAnalysis of Thermal Distribution for LCD-TV Using Infrared CameraInfrared Thermographic Technique to Measure Corrosion in Reinforcing BarThermographic Damage Detection of Ceramic Matrix Composites During Tension TestingCorrelations between the Changes of Pain and Temperature by Infrared Thermography in Central Poststroke PainNDT Analysis of Metal Materials with Internal Defects Using Active Infrared Thermography MethodInfluence of the Thickness of the Specimen in the Infrared Hybrid Method in Consideration of Heat ConductionThermographic Diagnosis of Whiplash Injury with/without RadiculopathyFar IR Emission and Thermal Properties of Ceramics Coated Fabrics by IR ThermographyMedical Thermography Evaluation of Anti-Fatigue Mat to Prevent Muscular Skeletal DisorderModeling of Ultrasonic Wave Propagation Path through Cancellous Bone and Quantitative Estimation of Bone Density and Bone QualityOptical Inspection of Interfacial Thermal Strains in IC Composite MicrostructuresA Study on the Fracture Characteristics of Plasma-Treated Graphite/Epoxy Laminated CompositesMatrix Crack Detection of CFRP Laminates in Cryogenic Temperature Using Electrical Resistance Change MethodThe Collapse Characteristics of CFRP Hat-Shaped Section Members under Axial CompressionThe Impact Collapse Characteristics of Al/CFRP Members for Light-WeightThe Penetration Characteristics of CF/Epoxy Curved Sheller According to Stacking SequenceUltrasonic Inspection of Carbon/ Phenolic Composites Using a Peak-Delay Measurement MethodNondestructive Determination of Ply-Layup Error in Cured/Uncured CF/Epoxy CompositesEffective Flexibility Calculation for Beams with Periodic In-HomogeneitiesAnalysis of Dominant Frequencies of Glass Fiber/Aluminum Laminates during Acoustic Emission MeasurementAcoustic Emission Monitoring of Ablative Composite Liner Bonded on Steel Nozzle under Static LoadingMechanical Property and Oxidation Behavior of LPS-SiC MaterialsCarbon Nanotubes-Adsorbed Polymeric Microspheres for Electrorheological FluidsMechanical Properties of Silk Fiber Reinforced Polymer Composites with Carbon NanotubesCharacterization of Delamination in Laminated Composites Based on Damage IndicesThermal Shock Damage and Mechanical Property of MoSi2 Materials by NDE TechniqueElectrospun Nanofiber of Nylon 610/Multi-Walled Carbon Nanotube CompositesFiber Orientation State Depending on the Injection Mold Gate Variations during FRP Injection MoldingImpact Characteristics and Damage Detection of Woven Carbon/Epoxy Laminates for Car Body Structures of a Tilting TrainNDE Characterization and Mechanical Behavior in Ceramic Matrix CompositesThe Stress Concentration Factor (Kt) and Fatigue Crack Behavior on the Relative Defect Location in Monolithic Aluminum versus GLAREDetectability of Bearing Failure of Composite Bolted Joints by Electric Resistance Change MethodCompressive Deformation Analysis of Smart Skin Structure Embedded with Round Shape AntennaLaser-Generated Ultrasonic Technique for Inspecting Delamination in CFRPUltrasound Speed in Articular Cartilage under Different Bathing Saline ConcentrationFabrication of a 40 MHz Single Element Ultrasonic Transducer Using a PMN-PT Single CrystalPressure Distributions on the Buttocks and Thighs by Electrical Stimulation in the Sitting Posture3D Motion Analysis on the Hallux Valgus by Using the Multi-Segment Foot ModelHigh Resolution One-Dimensional Dose Measurement Using a Movable Miniature Fiber-Optic Radiation SensorThe Effect of Oxygen on Verbal Performance: An fMRI StudyDesign of Femoral IM Nail by Analysis of Lateral Curve AngleA Flat-Panel X-Ray Imaging Module for Medical Imaging and Nondestructive TestingAssessment of Muscle Spasticity by a Simple Pendulum Test and ModelingA Comprehensive Assessment of Motor Function for Use at HomeFunctional Reorganization in Chronic Hemiparetic Patients after Training: fMRI StudiesEffects on Foot/Ankle Roll-Over Characteristics According to Different Heel Heights during WalkingInfluence of a-Adrenoceptor Mediated Vasoconstriction on Spontaneously Hypertensive Rats after Exercise TrainingDevelopment of an MR-Compatible ECG AmplifierMeasurement of Elastic Properties of Self-Oscillating GelLabel-Free DNA Detection Using a Near-Field MicrowaveMonitoring of Bone Temperature during Osseous Preparation for Orthodontic Micro-Screw Implants: Effect of Motor Speed and RessureGlucose Biosensing Using a Near-Field Microwave MicroprobeCharacterization of CMOS Pixel Detectors for Digital X-Ray ImagingInvestigation of Scintillation Screens for X-Ray ImagingComputational Toolset for X-Ray Spectral AnalysisModel-Based Approach for Quantitative Evaluation of SpasticityNon-Invasive Analysis of the Micro-Structural and Biomechanical Properties of Trabecular Bone in Human Femoral HeadAn Automated Measurement System of Ultrasonic Properties of Tofu and Acorn Curd (Dotori Muk)Detecting and Tracking Changes of Morphologies and Mechanical Characteristics in the Lumbar Vertebrae of OVX Rats Using RP Technique and Micro-FE MethodMeasurment of Strain Generated Potential Near Bone and Implant Interface for Assessment of OsseointegrationA New Severity Index for Nondestructive Dynamic Analyses in Equinus GaitNon-Invasive Kinematic Analysis of the Triceps Surae Muscle-Tendon Complex during a GaitThe Analysis of Slice-Induced Factors in Golf Swing Using a 3D Motion Capture SystemMoment Prediction for Evaluating Stability of the Upper Cervical Spine Fixed with Wires Using Finite Element AnalysisThe Development Telemedicine System for Blood Pressure Monitoring via EthernetDevelopment of a Portable and Wireless Surface EMGDevelopment of an Algorithm for a PZT Ceramic Foot Pressure SensorComputer-Graphics Based Analysis of Human Foot Kinematics during the GaitThe Effects of High-Heeled Posture on COP Kinematics and Muscle Fatigue during the Balance Control of Human BodyCharacterization of the Harmonic Generation from Cavitating Bubbles Interacted with a Diagnostic Ultrasound in the Focal Region of High Intensity Focused UltrasoundNon-Invasive Analysis of Trabecular Microstructural and Biomechanical Properties in Obese OLETF RatsUltrasonic Characterization of Thermal Distribution in Vicinity for a Cylindrical Thermal Lesion in a Biological TissueA Study on the External and Internal Morphology of the Mandibular First Premolar Using a Micro-CTBinding Inhibition Assay Using Fiber-Optic Based Biosensor for the Detection of Foodborne PathogensVolume Measurement by Using Helmholtz Acoustic Resonance for Porous Produce and Foods -- Real-Time Measurement of Bread Dough Volume in Fermentation Process --Detection of Contaminants on Poultry Processing Plant Equipment Using Laser-Induced Fluorescence ImagingDetection of Metal Contaminants in Food Using High Tc SQUIDs MagnetometerDetection of Listeria Monocytogenes Using an Automated Fiber-Optic Biosensor: RAPTORApplication of the X-Ray CT Technique for NDE of Wood in FieldStudies about the Influence Factors on Ultrasonic Velocity of Domestic Red PineNDE of Decayed Wood with Ultrasonic CTA Real-Time Automatic Inspection System for Pattavia PineapplesWavelet Analysis of Ultrasonic Transmitted Signal of Apple during Storage TimeMeasurement of Moisture Content in Powdered Food Using Microwave Free-Space Transmission TechniqueProper Light Array Design for the Optimum Nondestructive Evaluation of Fruit?s Internal QualityNondestructive Cucumber Quality Evaluation System Using Machine VisionInternal Quality Estimation of Watermelon by Multiple Acoustic Signal SensingApplication of Sensors to Assess Soil Conditions in a Korean Paddy FieldDevelopment of a Portable Electronic Nose System to Analyze Flavour Signal Patterns of KochujangAnalysis of Characteristics of In-Line Magnetic Resonance SensorNondestructive Evaluation System for White Ginseng Quality Using Image Processing TechniqueDetermination of Tillage Depth Based on Physical Properties of Soil for Rice Production in KoreaDevelopment of Spike Wavelet Analysis and Its Application to Damage Analysis on GearboxDesign of Adaptive Filter for Health Monitoring on a GearboxA New Signal Processing Technique to Estimate Velocity Dependent Dynamic Friction CoefficientFrequency Windowing Technique for Reducing Multi-Path Noise in Free-Field Reciprocity Microphone Calibration MethodMulti-Reference Scan-Based Nearfield Acoustical HolographyA Comparative Study on the Vibration Signal-Based Damage Detection for Rotor-Bearing System in Speed-Up Process:The Feature Extraction ApproachDesign of a Time-Frequency Distribution for Vibration Monitoring under Corrosions in the PipeHigh Speed Decoding of Entropy Codes in H.264/AVC Based on a Symbol PredictionAutomated Multichannel Signal Classification Systems for Ultrasonic Nondestrucitve EvaluationAn Approach To Discrete Spectrum Correction Based on Energy CentroidAn Impact Source Localization on a Spherical Shell by Using Smoothed Wigner-Ville DistributionsLiquid Behavior in Containers with a Liquid-Packing Bag for Liquid Products Subjected to Drop ImpactDetermination of Principal-Stress Directions by Three-Step Color Phase Shifting TechniqueImage Processing Based Automatic Inspection for Assembly Line of AutomobilesDevelopment of a Manipulator Free Mobile Ultrasonic C-Scan SystemFast and Accurate Color Space Conversion MatrixWavelet Based Multi-Bit Fingerprinting Against Geometric DistortionsOptical Properties for ZnSe Epilayer Obtained From Photoluminescience MeasurementAsymmetrical Dual Charge EPCM for Delamination Monitoring of CFRP LaminateLuminance Change Method for Cure Monitoring of GFRPEffect of SiO2 Cap Layer on Thermal Stability of Nickel and Nickel-Cobalt SilicideNondestructive Evaluation of Corrosion Progression on Titanium and Its Alloy Surface by Wetting MethodMeasurement of Carboxyl Group Separated from a Thin Film Copolymerized by Low-Temperature Plasma at Atmospheric Pressure of C2H2 and CO2Synthesis and Characterization of Ce-Doped BZT Thin Films Deposited by a RF Magnetron Sputtering MethodEvaluation of Recovery Process of Pure Magnesium at Room Temperature By Acoustic EmissionTransition of Friction and Wear by Stick-Slip Phenomenon in Various Environments under Fretting ConditionsResidual Stress Measurement and Evaluation on Ceramics with X-Ray and Indentation MethodFE Analysis of Thermoelectric Cooler Using Bi-Te-Sb Compound AlloyMeasurement of TiAlN Coating Effects on Machining Characteristics of High Hardened SteelEffect of Anisotropy on The Thermoelectric Properties of Bi1Sb3Te6 Added with Au Alloys Prepared by Mechanical Alloying ProcessEffect of Sr and Sb on Microstructure and Mechanical Properties of Mg-5AI-2Si AlloysEffect of Al on the Castability, Tensile and Creep Properties of Mg-xAl-ZnFracture Characteristic of Aged DLC Films Using Nano-indentation and Micro-indentationAnalysis of Residual Stress in Thin Film Using Laser Scanning MethodEvaluation of Thermal Stress Resistance of Titanium Alloy for the Air Breathing EngineThermal Properties of a Liquid-Crystalline Polyurethanes Containing Biphenyl MesogenInfluence of Anisotropic Materials on Stress Intensity Factor under Biaxial Stress ConditionsNondestructive Structural Analysis on Deformation Properties of Highly Porous Aluminum MaterialHigh Resolution Electrical Resistance Profiling of Laboratory Soil SpecimensStrength-Based and Wave-Based Liquefaction CharacterizationEvaluation of Grouting Performance Using Electrical Resistivity TomographyRock Mass Classification Using Electrical Resistivity - an Analytical StudyCharacterization of Clay Sedimentation Using Piezoelectric Bender ElementsTextures Evolution of Rolled AA5182 Alloy Sheets after AnnealingInspection of Thin Copper Heat Exchanger Tubes Using SQUID-NDE SystemDetermination of the Mechanism Based Deposition Processes of Thin Film in OLEDThe Nondestructive Evaluation Method for the Optical Glass Lens by Resonant Ultrasound Spectroscopy Spectrum Analysis of an Ultrasonic Signal According to a Surface Status by Using a Robust Laser-Based Ultrasonic SystemEvaluation of Effect of Process Conditions on Microstructures in Plasma Sprayed Coating by In Situ Laser AEA Study of the Quantitative Nondestructive Evaluation Using the Cross Type Magnetic Source and the Magnetic CameraNumerical Analysis of Magneto-Optical Eddy Current Imaging Using FEMNondestructive and Non-Contact Characterization Technique for Metal Thin Films Using a Near-Field Microwave MicroprobeMeasurement of Alloying Degree of Galvannealed Steels by X-Ray DiffractionComparisons of Precision Measurement Methods for Metallic ResistivitiesUncertainty Improvements of Metallic Resistivity Measurements by the Four-Point Probe MethodUltrasonic Characterization of Residual Stress in Shot Peened AI 7075 Alloy Using Acoustic SignatureThe Influence of Microstructure and Chemical Composition on the Strength of Cast Iron Used for Railway VehiclesEvaluation of Surface and Internal Defects of Railway Wheel using Induced Current Focusing Potential DropDurability Evaluations of the Car Body for Rubber-Tired Light Rail VehiclesStructural Safety Evaluations of Bogie Frames for Rubber-Tired AGT VehichlesThe Evolution of Contact Stress and Surface Profile in Press-Fitted Shaft under Partial Slip ConditionsA Study on the Evaluation Methods of Running Safety for Railway VehicleStatistical Analysis of Casting Defects in Microstructure for Understanding the Effect on Fatigue Property of 17-4PH Stainless SteelConsideration of Uncertainty in Diagnosis for Railway ArresterDetection and Image Processing of Interfacial Micro-Delamination in the Thin-Layered Structure by Using Nonlinear Ultrasonic EffectApplication of Ultrasonic Test System for Test Performance Improvement of Welding FlawFailure Analysis and Evaluation of Strength Properties for Brazed JointsRisk Assessment of Axially Loaded Single Piles using RSM-based Reliability MethodFormulation of Reliability-Based Fatigue Assessment of a Car Body for a High Speed Train Passing Through TunnelsReliability Assessment Approach Using Failure Mode Analysis in Machining CenterA Development of a New Life Test Procedure for Fan MotorsReliability of Buried Pipeline Using FORM and Monte Carlo SimulationThe Tribological Behaviors of the Surfaces Lubricated by Polyaklylene Glycol and Polyolester Oils in Carbon Dioxide EnvironmentTribological Performance of Two Oilless Sintered-Metal Bearings for the Geared Motor in a RefrigeratorGear Fault Classification Using Kernel Discriminant AnalysisThe Effect of the Operational Conditions on the Quantitative Leak Rate of Leak DetectorsThe Effect of Parameter Distribution Pattern on Frequency Response Localization in Nearly Periodic SystemsReliability Analysis of a Robot Manipulator Operation Employing Single Monte-Carlo SimulationRisk Based Optimization of the Life Assessment for Fossil Power PlantDetermination of the Hydrogen Concentration in Zr-2.5Nb Alloy by a Resonant Ultrasound SpectroscopyProbabilistic Reliability Design of Satellite Structures under Launching Environments By MetamodelCharacteristics of Stick Regions in Frictional Vibration with a Compressed Nonlinear SpringEvaluation of the Ride Comfort for High Speed Trains in KoreaA Study on the Method of Vibration Analysis for Korean High Speed Train by the On-Line TestDynamic Analysis and Fatigue Life Prediction of a Very Flexible Component in Multibody SystemDynamic Stress Analysis Method and Its Application for Urethane Wheels Using the Computer ModelA Study on the Surface Characteristics with the Vibration Factor in the Micro-MachineMeasurement of Low-Frequency Wave Propagation in a Railway Contact Wire with Dispersive Characteristics Using Wavelet TransformThe Identification of Relationship between Vibration and Noise of Universal Motor in Working StatusCharacteristics of Crack Detection on Plates Using Strain Mode Shapes; Sensor Grids and GeometryAnalysis of Vibration Caused by Ball Bearing in a HDD Spindle System at Elevated TemperatureRobust Measurement of Damping Ratios of a Railway Contact Wire Using Wavelet TransformsA Diagnostic Technique for the Inspection of Pipes in MOCVD SystemImage Reconstruction of Blockage in the Continuous and Stepped Pipelines by Noninvasive Acoustic MethodNonlinear Structural Dynamic Analyses of Micro Cantilever Beams Actuated by Electrostatic ForceDynamic Impact Analysis of a Rotating Beam Having a Tip MassDynamic Stability Characteristics of Axially Accelerated BeamsPortable Neutron Source Using by Spherically Convergent Beam Fusion Device for Nondestructive TestingApplication of Spectroscopic Radiography Using Pulsed Neutron Time-of-Flight Method for Material CharacterizationNondestructive SANS Study of Reactor Pressure Vessel Steel after IrradiationNondestructive Dynamic Process Monitoring Using Electrical Capacitance Tomography Interfacial Reaction of Cu-Tie Coating-Polyimide Flexible Copper Clad LaminatesEvaluation of Shockproofness of Small Form Factor Mobile TFT-LCDPreparation and Characterization of Nanosized Al2O3 Particles Synthesized by the thermal MOCVD and Plasma CVDGrowth of Highly Oriented Zinc Oxide Thin Films by Plasma Enhanced Chemical Vapor DepositionOptical Emission Spectra Related to Microstructures of Diamond Film Deposited by Plasma Enhanced Chemical Vapor DepositionThermal Diffusivity and Phase Transition of Rare Earth ManganitesPreparation and Characterization of Polymer Light Emitting Diodes with ITO/PEDOT:PSS/MEH-PPV/LiF/Al Structure(110) Silicon Hard Master Fabrication Using Wet Etching for Multi-Mode Planar Optical SplitterDevelopment of In-Situ SUB-100nm Particle Detection in Vacuum SystemUltrasonic Measurement of Elastic Properties of Nanostructured AluminaA Study on the Measurement System Using an Ultrasonic Sensor in Electron Beam WeldingReliability of Flip Chip Package with Underfills under Thermal ShockThe Evaluation of Weldability for AZ31B-H24 and AZ91C-F Mg Alloys in Friction Stir WeldingStudy on Evaluation of AE Signals at Weld Region of SA 516 SteelThe Study on Mechanical Properties in Narrow-Gap Welds for SA312 TP347Numerical Simulation of Al-SPCC WeldmentThe Weldability of Primer-Coated Steel for Shipbuilding by CO2 LaserImplementation of Performance Demonstration Programs for Steam Generator Tubing AnalystsComparison between Conventional and Performance Demonstration UT Method by Round Robin TestDevelopment of a Partial Blockage Detection Algorithm through Temperature Fluctuation Analyses in a Liquid Metal Reactor
