Buch, Englisch, 2920 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 5500 g
Buch, Englisch, 2920 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 5500 g
ISBN: 978-3-03785-502-7
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preface and Conference Organization
Chapter 1: Composites
Aluminium Titanate-Aluminia Composites Synthesized by Heterogeneous Precipitation Method
Electrochemical Behavior of Copper in the (NaCl-KCl-CuCl2) Molten Salt
Corrosion Resistance of E-Glass Fiber in Simulated Oilfield Environment
A Study of Spectral Changes of Reactive Dyes
Piezoelectric Properties of 1-3 Piezoelectric Tubular Composites
Effects of B2O3 Flux on the Synthesis and Microstructure of Aluminum Metal Matrix Composites
The Melting Temperature of CaO-(2CaO•SiO2)-B2O3-SiO2-(Al2O3) Slag System
Calculation Model of Mass Action Concentrations for CaO-Al2O3-SiO2 Slag System
Study on Sintering Properties and Crystallization of Fused Quartz Ceramic Materials Containing BN-B4C
Effect of Electromagnetic Stirring on Morphology Evolution of Mg2Si in Hypereutectic Al-Si Alloy Composite
Numerical Simulations of SFRC Projectile Penetrating into Limestone Using FEM/SPH Coupling Method
Research on the Optimization of Porosity in Resin Mineral Composite
Preparation and Properties of Closed Cell Aluminum–Fly Ash Floating Beads Composite Foam
Application of Advanced Carbon Fiber Composite Material in Sport Equipments
Tensile Behavior of 2.5D C/SiCN Composites
Microstructure Evolution of In Situ Synthesized VC Reinforced Iron Matrix Composites
Study on Antistatic PET/PTT-CNTs Composites
Modeling of the Tensile Deformation Behavior of SiCp/Fe Composites
Low-Temperature Preparation of Porous Cordierite-Mullite Ceramics Using Rice Husk as Silica Source and Pore-Forming Agent
Reliability Based Buckling Analysis of Composite Panels with Tophat Stiffened Topology
Doping of Diamond Crystals with a Dopant of P3N5
The Effects of the Aging Temperature on the Microstructure and Corrosion Resistance of the Nickel-Phosphorus Composite Al2O3 Deposit
Influence of Phosphorous on the Tribological Properties of PM Iron-Based Sintered Composites
Effect of Pouring Temperature on the Microstructure of HCCI/Steel Composite Hammer
Microstructure of In Situ Particles/7055Al Matrix Composites with Deep Cryogenic Treatment
Effect of CaO/SiO2 Ratio and TiO2 on Glass-Ceramics Made from Steel Slag and Fly Ash
Experimental Studies of Glass Reinforced Aluminum (GLARE) Bolted Joint
Conductive Rubber Nanocomposites as Tensile and Pressure Sensors
Effect of Coupling Agent Treatment on the Properties of Silicon Carbide Filled LLDPE Composites
High Strain-Rate Compressive Response of Epoxy Composites
Preparation of Nickel/Poly(m-Toluidine) Composites and its Magnetic Properties
Tribological Characteristics of Si3N4-HBN Ceramic Materials for Dry Application
Evaluation of Drag Reduction Agent Used in Oil Pipeline Transportation
Study of Wettability of Vinyl Resin on Carbon Fiber
Concrete Crack Control Technology in Chongqing Inch Container Terminal Box Letter of Application in Engineering
Study on Physical and Dynamic Properties of BR Based Composites Filled with Different Particle Size of Magnesia
Thermodynamic Parameters Analysis of MgS Superfine Inclusion in Grain Boundary
Optimization Design for Laminated Composite Structure Based on Kriging Model
Study on the Performance of Pearl Fiber Composite Yarn
Steel-Concrete Bond Deterioration under Repeated Loading for Different Confinement Levels
Test and Analysis on Anti-Penetration Performance of Ceramic Multi-Layer Composite Medium
Chapter 2: Micro/Nano Materials and Equipments
Study on Dynamics Performance of Nano-Concrete
Effect of Doping Transition Metal Ions on Photocatalysis of TiO2 Nanowires
Mechanism of Nanofibre Fabrication by Meltblowing
Synthesis and Luminescent Properties of Micro – Nanometer Ca0.69Sr0.23(PxMoy)O4:0.05Eu3+ by Co Precipitation – Melted-Salt Method
Experimental Study on Ultrasonic Grinding of Nano-ZrO2 Ceramics by Single-Grit
Tribological Characteristics of Nano Structured Nickel Coatings for Renivating of Extruding Shafts
In-Plane Thermoelectric Generator of Carbon Nanotube Membrane Driven by Thermal Gas Flow
Solid State Chemical Reaction Synthesis and Characterization of Nanocrystalline Cerium Oxalate under Ultrasonication Spectra
Application of Tetragonal Nano-Zirconia in Ceramic Teeth
Effect of Starting Powders on Microstructure and Properties of Silicon Nitride Nanoceramics
Production of Nano NiO Particle with Chemical Precipitation Method and their Characteristics
Study of Modification Mechanism of Ultrafine Silica Modified by PAMAM
Size-Controlled Synthesis of Magnetite Nanoparticles from Iron Acetate by Thermal Decomposition
Preparation and Characterization Nano-Cellulose and its Surface Modification by Silane Coupling Agent
Polyethersulfone Composites Reinforced by Silica Nanoparticles
Preparation and Application Study of Nano-Sized Organic Bentonite Used for Composite Flame Retardant
Improvement Effect of Functionalized Cnts on Mechanical and Thermal Properties of Epoxy Matrix
Chapter 3: Metal Alloy Materials
Effects of Deformation Ratio above Recrystallizaton Temperature on Microstructure and Properties of 2A12 Aluminum Alloy
Effects of Pre-Ageing on Thermomechanical Treatment Process of 2A12 Aluminum Alloy
Influence of Stiffener Structural Parameters on Compress Buckling Performance of Alloy Aluminum Stiffened Panel
Age-Hardening Characteristics of Cu-Ni-Si Alloy after Cold Deformation
The Application of Abaqus Software in the Online-Quenching Process of 6005 Aluminum Alloy Profile
Study on Structure Stability of Ti-Al Multilaminate Material at High Temperature
Study on Tribological Performances of Friction Plate on MW Wind Power
Properties of Low-Carbon Al2O3-C Refractories with Different Critical Particle Size
Research on the Tribology Performance of Copper-Bismuth Bearing Material
Effect of Electromagnetic Stirring Process Parameters on Semi-Solid Fluid Field of Aluminum Alloy
Coupled Simulation on Temperature Field and Microstructure Formation Process of K4169 Superalloy Blade in Investment Casting
Tensile Creep Behavior of Two NiAl-Based Alloys
Effect of Divorced Eutectic on the Liquation Crack Susceptibility of Al-Cu Alloy
Reaction Hot-Pressed Sintering of Grain-Refined TiB2-TiC Composites by AlN-SiC Solid Solution
The Heterogeneity of Composition and Microstructure in Cast Large Sized 3104 Alloy Slab
Effect of Initial Texture on the Development of Microstructure and Mechanical Properties in AZ31 Magnesium Alloy after Rolling at 300°C
Influence of Jacket and Filling Materials Characteristics on PELE Effects
Influences of Ultrasonic Wave on Polycrystalline Alumina Fibers Synthesized
Rheological Behavior of Semisolid AlSi6Mg2 Alloy at Transient State
Workability of ZK60A Alloy Depending on Microstructure
Research on Synthesizing Process under Ultrasound Coupling and Refining Performance of Al-Ti-C Grain Refiner
Effect of Alloying Elements on Microstructure, Texture Development, and Mechanical Properties of Magnesium Alloys
Block Shear Strength of Single Shear Four-Bolted Connections with Aluminum Alloys – Experiment and Design Strength Comparison
Analysis on Fatigue Crack Propagation and Fractography of A7075 Aluminum Alloy
Research on Cold-Rolled Bimetal of High-Tin Aluminum Alloy and Steel
Effects of Cu and Sb on Corrosion Resistance of ZnAl27 Alloy
Chapter 4: Steel
Very Long Life Fatigue Behavior of Q345 Bridge Steel
The Study on the Precipitation Behavior of the Second Phase Particles for Fine Grain and High Strength IF Steel
Microstructure Evolution of Dynamic Recrystallization of 42CrMo Steel during Multi-Stage Forging by FEM
The Corrosion Behavior of a Low Carbon Bainite Steel in Simulated Atmosphere Environment Containing Chloride and/or Sulfide
The Analysis of Magnesium Compound Desulfurizer and Compound Desulfurizer in PANGANG
Effect of Phosphorus on the Mechanical Properties and Microstructure of Interstitial Free Steel
Study on the Key Technologies of Direct Reduction for Rotary Hearth Furnace Dealing with Carbon Containing Pellets
Study on Utilization Technology of Vanadium Titanium Magnetite Based on the Rotary Hearth Furnace Direct Reduction Process
Study on the Lining Erosion of Deep Reduction Electric Arc Furnace in Smelting Metallized Pellets Process Produced by Vanadium Titanium Magnetite
Study on Desulphurization Technology in RH Refining for Electric Steel
The Application of the High Alumina Composite Slag in Semi-Steelmaking
Study on Residual Stress in High-Speed Cutting NAK80 Mold-Steel
Ultrasound-Assisted Electrospark Deposition of 3Cr2NiMo Steel
Effect of the Strain Rate on Mechanical Properties and Microstructure of High Strength Low Alloy Steel HC340LA
A Study on Recrystallization Behavior of Low Carbon Bainitic Steel during Multi-Pass Deformation
Calculation of Carbon Diffusion Coefficient in Spheroidal Graphite Cast Iron
Effects of Sintering Conditions on Properties of a Warm Compacted Stainless Steel Powder
Micromechanical Modelling for Bauschinger Effect of Dual Phase Steel
Research on Activities of CaO-SiO2-B2O3 (Al2O3, Fe2O3) Slag System
Study on Corrosion Behaviors of the PTA Plant in Halogen
EBSD Investigation on the Primary Recrystallization in Warm Rolled Ti-IF Steel
GAP-Like Scheduling Model of Byproduct Gas in Iron and Steel Process
Effects of B2O3 and CaF2 on Melting Properties of CaO-Based Slags
Chapter 5: Polymer Materials
Effect of Blowing Agent and Polyethylene Glycol on Cellular Structure and Mechanical Properties of Chloroprene Rubber
Evaluation of Mechanical Properties of Polyamide 6(PA6) Filled with Wollastonite and Inorganic Modified Wollastonite
Research on Magnetorheological Elastomers Air Spring Based NR/SBR Rubber
Research on Electrical Insulating Property of Disk Insulator in High Voltage GIS Insulated Grounding Module
The Characterization and Synthesis of Polyaniline Doped by Peroxo–Polytungstic Acid
Performance Enhancements of Polysulfone Ultrafiltration Membranes through Blending with Functionalized Carbon Nanotubes and Polyaniline Nanofibers
Effect of DS on the Structure and Charged Properties of SPSf/PVDF Blend Membranes via Immersion Precipitation Process
Synthesis and Characterization of Polyaniline Copolymer
Applied Research on Modified Polyacrylonitrile Fiber with Collagen
The Comparative Analysis of Wood-Plastic Raw Material to Heat up the Experiment and Simulation of Heat Transfer Process
Influence of Diisocyanates on Dynamic Mechanical Properties of Castable Polyurethane Elastomers
Study on the Properties of Melt Spinning PAN/MWNTs Composite Fibers
Preparation and Properties of Polybenzoxazine/Lignin Alloy
Synthesis and Effect of Polycarboxylate Superplasticizer with Two Different Molecular Polyethers as Side Chain
Effects of Thixotropic Agent and Storage Time on the Rheological Properties of Epoxy Resin
A New Textile Sizing Prepared by the Hemp Core Cellulose Ethers
Comparison of the Properties of Akund/Cotton Blended Yarn Produced by Compact Spinning with Pure Cotton Yarn
Adhesion Effect Model of a Single Biomimetic Fiber Based on JKR Contact Theory
Study on Processing of Cotton / Akund Fibers Blended Yarn
Effect of Low Molecular Weight Ethylene Homopolymer on Structure and Properties of Bimodal High Density Polyethylene
Study on Magnesium Hydroxide Sulfate Whisker and Organo- Modified MMT on Flame Retarded Liquid Silicone Rubber
Application of SLP Method in Rubber Powder Workshop
Study on the Structure and the Properties of Akund Fiber
The Reseach of the Morphology and Mechanical Properties of PA6/POE-g-MAH/OMMT Ternary Blends
Shear Strength of Void Slab with Polystyrene Forms
The Influence of Temperature on Toughness of PA6/POE-G-MAH/OMMT Blends
The Fluidity and AC Impedance of Polypropylene Composites Filled with Activated Carbon Black
AC Electrical Properties of Titanate-Linkcoupled Carbon Black Filled Polypropylene Composites
The Effect of Hydrophilic Components of Zinc Based Copolymer on its Self Polishing Behavior
Study on the Synthesis of Polyester Type Waterborne Polyurethane and Modifying by Nano-Sized Particles
The Effects of Synthesis Conditions on PUF Microcapsule Morphology
Chapter 6: Optical/Electronic/Magnetic Materials
Effect of Nano-CuO on Luminous Intensity of Pyrotechnics Composite Containing KClO4 and Al
Explorative Research on the Magnetostriction of Carbon Black Filled Polypropylene Composites
The Synthesis and Morphology Control of High after-Grow Intensity SrAl2O4: Eu, Dy Phosphors
The Lithium Doping Effect on (Na0.5K0.5)NbO3 Lead-Free Piezo-Ceramics Structure Stability and Ferroelectric Characteristics
Efficiency Inorganic Thin Film Solar Cells with Flexible Substrate
The Development of Permanent Strong Magnets and its Application in the Deironing of Kaolin
Optical and Dielectric Characteristics of Photoactive Layer Thin Films for Organic Photovoltaic Cells
A LED Reflector Design and Research for Uniform Rectangular Illumination
The Special Magnetic Transition in FeX/(In2O3)1-X Granular Films
Size and Sp2 Fraction Dependence of Energy Gaps in Carbon Dots
An Alternative Design of Light Delivery System for Heat-Assisted Magnetic Recording
Research on the New Multilayer Composite Lightning Electromagnetic Shielding Materials
Synthesis of Diester Based Magnetic Fluid
Fluorescence Response of Pyrene/Pyrrole Copolymer to Hg2+ in the Aqueous Solution
Photocatalytic Oxidation Thiophene Using Nano-TiO2
Luminescent Properties of Zn2SiO4:Eu3+,Dy3+ Phosphors via Sol-Gel Process
Probing the Structure and Visible Light Photocatalytic Mechanism of LaVO4/TiO2 Composite Using XRD, BET, and EPR
Effects of Y2O3 and In2O3 on the Electrical Properties of SnO2-Based Varistors
Chapter 7: Energy Materials and New Energy Technology
The Performance Analysis of LPG as the Vehicle Fuel
Study on Influence of Geometric Parameters on DMFC Performance Based on Experiments and CFD Simulations
Study on the Preparation and Properties of Li4Ti5O12 Powder
The Influences of Catalysts in the Thermal Decomposition of Barium Nitrate as Pyrotechnic Oxidants
A Study on PEMFC Faults Diagnosis Based on Wavelet Analysis
Experimental Studies on Enriching Vanadium from Vanadium Tailings Carbon-Containing Pellets by EAF Melting
Effect of Fenton Reagent on the Thermal Stability of Proton-Exchange Membrane for Fuel Cell
Improving the Electrochemical Performance of LiFePO4/C Cathode by Selection of Carbon Source
Research of LiFePO4 as Positive Electrode Materials
Analysis and Evaluation of Active Based on MnOx-CeO2 Catalysts in Process of Particle Combustion for Diesel Particulate Filter
Study on the Harmless Treatment of Valve Regulated Lead-Acid Batteries in Substations
MPPT Control of Photovoltaic Cells Based on Dynamic Recurrent Fuzzy Neural Network
Modeling of Photovoltaic Cell Based on BP Neural Networks Improved by MEA
Chapter 8: Environmental Friendly Materials and Waste Utilization
Comparative Analysis of Excess Sludge and Digested Sludge Pyrolysis Characteristics
Synthesis of Magnetic Photocatalystic Particles for Bacterial Control
A Novel Method for POP Stacking Warpage
Soil Pollution Prevention Planning of Poyang Lake Ecological Economic Zone
TCF High-Brightness Bleaching NaOH-AQ Pulp of Fast-Growing Poplar with Low Kappa Number
Study on Removal of Iron and Manganese from Mine Water by Method of Medicament
The Impact of Paper Formation on Printability
Mechanism of CeVO4/TiO2 Photocatalytic Degradation of VOCs under Visible Light Irradiation: Electrochemical, Photoluminescence and Active Oxygen Species Study
Sol-Gel Synthesis of N-Doped Mesoporous TiO2 with High Crystallinity and High Visible Light Photocatalytic Activity
Studies on Phosphate Removal from Aqueous Solution by Honeycomb-Cinder Slag
Properties of the Recycled Aggregate Concrete
Properties of Municipal Solid Waste Incineration (MSWI) Fly Ash during Heating Process
Preparation and Characterization of Diatomite-Based Porous Ceramics
Recycle of Trimethyl Chlorosilane from Chlorosilane Waste
Synthesis of Cationic Starch Flocculant and Properties
A Study on the Strengthened Oxygen Delignification of NaOH-AQ Pulp of Fast Growing Poplar with Low Kappa Number
Chapter 8: Environmental Friendly Materials and Waste Utilization
Research on the Application of Expanded Perlite Cement Grinding Aids
Study on the Concentration Process of Glutamic Supernatant Fluid by Vacuum Membrane Distillation and the Reuse of Product Water
Study on the Reclamation Technology of Alkaline Phenol Formaldehyde Resin Bonded Sand
Biodegradability of Cellulose Fibers and the Fabrics in Activated Sludge
Experimental Research on Hybrid Strategy and Desulfurization for White Mud and Coal Slurry
Chapter 9: Biomaterials and Preparation Technology
Study on Strategy Improvement of Yeast Transformation Experiment Based on ANP Method
Design, Synthesis and Biological Evaluation of Novel Fentanyl Analogues as Agonist of µ-Opioid Receptor
Adhesive Evidence for Gecko-Inspired Biomimetic Fiber: Combination of Experiments and Modeling
Research on the Scale Density Extraction Technology of Cashmere and Wool
GC–MS Analysis of Petroleum Ether and Butyl Alcohol Extracts of Longan Seeds
Electricity Production in Microbial Fuel Cells Using Brush Bio-Anode and Bio-Cathode Made of PAN-Based Carbon Fibers
Separation of Curcumine (a Functional Food Colourant Material) from Rhizoma curcuma longae by Aqueous Two-Phase Systems
Novel Preparation and Characterization of Calcium-Strontium Hydroxyapatite
Crosslinking Characteristics of an Genipin-Fixed Porcine Acellular Dermal Matrix
Quantitative Effects of Oxygen Supply on Mycelia Growth and Extracellular Polysaccharide of Ganoderma tsugae
Analyze Efficacy of Traditional Chinese Medicine Based on OSC-OPLS-DA
Particle Loosening on the Surface of Dense Hydroxyapatite in Water
Research on the Relationship between Strength and Chemical Composition of Hemp Fiber
Lignocellulosic Microparticles Reconstituted from Legume Straw-1-Butyl-3-Methylimidazolium Chloride-Water Solution
Establishment and Analysis of the Fermentation Medium Model of Phellinus igniarius
Measurement of Total Phenolics, Antiradical Capacity and Reducing Power of Extracts of Chinese Medicinal Plants
Preparation Technology of Nanometer Ceramic Particles Reinforced Metal-Matrix Graded Coating by Laser Multi-Layer Cladding
Chapter 10: Thin Films
Selective Growth of B-Doped Diamond on Si-Doped Diamond Film
Characterization of Antibacterial Film Based on PVA and Clove Oil/ß-Cyclodextrin Inclusion Complex
Deposition and Application of CVD Diamond Film on the Interior-Hole Surface of Shaped-Wire Drawing Die
The Preparation and Properties of Ce0.5Ti0.5O2 Ion Storage Films
Facile Deposition of Zirconia Optical Films Based on the Solvothermal Treatment of Zirconyl Nitrate-Water-Methanol System
Bridge Action of Double-Deck Films Interface Electrons
The Micro-Indentation Detection of Multilayer Structured Transparent Film Based on Dark Field Illumination
Synthesis of Lithium Thin Film by Electrodeposition from Ionic Liquid
Corrosion Behaviors in Simulated Body Fluid for TiO2 Films Deposited on AZ31 Magnesium Alloys by Magnetron Sputtering
A Uniaxial Tensile Method and its Device Design Scheme Based on Single Rotary Drum Applied for Polymer Films
Deposition and Characterization of Boron-Doped HFCVD Diamond Films on Ti, SiC, Si and Ta Substrates
Preparation and Conductive Properties of Ag Thin Film by DC Magnetron Sputtering Method
Structure and Photocatalytic Properties of Fixed Porous TiO2 Composite Film on Steel Prepared by Plasma Electrolytic Oxidation
RETRACTED: Study of Parylene-C Thin Film Deposited on Flat Substrates
Research on the Influence of N2 Partial Pressure on the Performance of Ti/Al/N Composite Film
Chapter 11: Structure Materials and Earthquake Resistant Structures
Shear Strength of Atypical Reinforced Concrete Pile by Permanent Uni-Wall System
Fresh Concrete Anti-Carbonization and Application of Patching Material in Carbonizing Concrete Structure
A Summary of Strength Formation Mechanism of Light Wall Material
Effect of Binders on the Properties of Chromia/Alumina Refractory Castables
The Influence of Seismic Behavior of Web-Type Column - Transfer Structure Caused by Rigidity Variation of the Transfer Storey
The Analysis of a Frame Structure with Additional Shear-Bending Bars under Horizontal Earthquake Action
Displacement-Based Seismic Design of Steel Frames Strengthened by Buckling-Restrained Braces
Chapter 12: Functional Materials
Preparation of Porous Fe-Ni Soft Magnetic Powders by Fe-N Alloys Transformation
The Research of Microparticle Filling Agent in Protecting Hydrocarbon Reservoir Technology
Influence of Grain Composition and Sintering Temperature on Performance of Silicon Carbide Refractory Material
Effect of MnCO3 on ZnO-Pr6O11-Co2O3-Cr2O3 Varistor Ceramics
Etching Volume Effect on the Morphology of Silicon Etched by Metal-Assisted Chemical Method
The Research of the Bending Crack Resistance Ability of Reinforced Concrete Beam Mixed with Emulsified Asphalt
Research on Fire-Resistant Fabric Properties of Basalt Fiber
Electric-Rheological Properties of Nanometer Titania Doped with Europium Oxide in Hydroxyl Silicone Oil
Effects of Cross-Linking Agents on Synthesis of Heat-Resistant Resin from Ethylene Tar
Synthesis and Characterization of Polyaniline Conductive Composite Films
Study on the Performance of Woven Basalt Filament Diaphragm Fabric
Analysis of the D3O Materials in Baseball Protective Clothing
Synthesis of ZnIn2S4 via a Surfactant-Assisted Hydrothermal Method and their Visible Light Photocatalytic Properties of MO Degradation
Effect of Doping Nb2O5 on Microstructure and Properties of Piezoelectric Ceramics PSZT
Visible Light Photocatalytic Degradation of Reactive Deep Blue K-R by BiOI and BiOCl0.2Br0.1I0.7
Synthesis and Characterization of Thermally Stable B-Doped Polycrystalline Diamond
Experimental Investigation on Autoclaved Aerated Concrete Using Palladium-Platinum Tailings
Synthesize Boron Doped Diamond Films on Porous Ti Substrates by DC-PCVD
Applications of Titanium Dioxide Photocatalytic Technology in Degrading VOC in Cars
Use of Finite Element Method in Study of Air Conditioning Clothes
Synthesis of a Novel Hexanedioyl Thiourea Resin and its Adsorption Properties for Ag(I)
Chapter 13: Surface Engineering/Coatings
A Study of Double-Coating of Hot-Dip Aluminizing
Effects of Heat Treatment Conditions on the Mechanical Properties of AA 2024 Alloy
The Study on Preparation Process Optimization of Ceramic Membrane Layer
The Effects of Substrate Negative Bias Voltage on Morphology and Properties Base on Multi-Arc Ion Plating
Research on Corrosion Resistance of MWEDM Surface with Different Electrical Parameters
Research of a Plasma Arc Metal Surface Strengthening Robot
The Investigation on Wear Resistance of Fe-Based Alloy Coating by Argon Arc Cladding
Friction and Wear Behavior of CaO-MgO-Al2O3-SiO2 Glass-Ceramics Prepared by Waste Casting Sands
Corrosion Characteristic of Double Glow Plasma Hydrogen-Free Carburizing on Titanium
Features of Workpiece and Orificed Cathodes in Triple-Cathode Plasma Surface Alloying System
CFD Modelling of Cadmium Telluride (CdTe) Thin Film Coating with Inline AP-MOCVD
Research on the Tribological Properties of Ni-W Alloy Electric Brush Plating Coatings at Elevated Temperatures
Process Optimization of Reaction Nitrogen Arc Welding Cladding TiCN/Fe Metal Ceramic Composite Coating
Study on TiAl(CN) Particle Reinforce Composites Coating Prepared by Reaction Nitrogen Arc Welding Cladding Process
Research on Transfer Coater with High Precision for Electrodes
Machined Surfaces Texture Analysis Based on Hough Transform and Run Length Statistics
Wear Resistance of Plasma Surface Copper Infiltrated on 0Cr18Ni9 Stainless Steel
Effects of H2O2 on Characteristics of Films Formed on Surface of Ti6Al4V in Electrolyte by Micro-Arc Oxidation
Analysis on Residual Stress in TiN Coating with Different Thicknesses
A New Surface Reconstruction Algorithm for Noisy 3D Unorganized Points
Effect of Multilayer Technology on Surface Properties of Diamond Coated Silicon Carbide with Surface Defects
Preparation of Hydroxyapatite Coatings by Anodizing-Electrodeposition on Pure Titanium
Effects of C6H8O7 and C3H8O3 in the Na2SiO3 Electrolyte on Characteristics of Coating Formed on ZAlSi12Cu2Mg1 by Micro-Arc Oxidation
Optimization of Process Parameters of Ni-TiN-CeO2 Binary Nanocomposite Coatings by Ultrasound-Pulse Electrodeposition
Study on the Control System of Vertical Tin-Plating Process for Semi-Flexible Coaxial Cable
Tool Deflection Error Regularization and Compensation in End Milling of Contour Surfaces
Study on the Microstructure of FeCrAl/Aluminum Bronze Composite Coatings Prepared by Supersonic Electric Arc-Spraying
Microstructure and Wear Resistance of Laser Cladding Nano-Al2O3/MCrAlY Composite Graded Coating on TiAl Alloy
Microstructure and Wear Properties of Laser Synthesized Composite Coatings on Ti-6Al-4V
Investigation on the Interfacial Bonding Strength between Ni-P-W/Al2O3 Composite Coatings and NdFeB Matrix
Synthesis and Evaluation of Anionic Gemini Surfactant
Optimization of Processing Parameters for Electrolysis and Plasma Polishing
Chapter 14: Modelling, Analysis and Simulation
Springback Prediction Using the Split-Ring Test Based on a Combined Anisotropic Hardening Model
Modeling and Movement Simulation of the Interior Transmission Mechanism of the Hoist Based on ProE
Reliability Optimization Design Based on the Blind Number Theory
Numerical Simulation of Compressive Experiment for Rock with a Natural Interlayer
Finite Element Simulation Analysis of Hydraulic Support Based on Virtual Prototype Technology
Numerical Simulation for Cup Shell Deep Drawn by Powder Flexible Cavity
Modeling and Simulation of Pharmaceutical Powder Compaction
Three-Dimensional Arc Modeling inside Non-Transferred Plasma Torch
Influence of Charges Shape on a Closely Air Blast Loading
A Study on Stoma Arrangement of Air-Cushion Lamination and Numerical Simulation of the Pressure Field
The Refined Theory of Axisymmetric Circular Cylinder in One-Dimensional Hexagonal Quasicrystals
Numerical Analysis on Cooling Process of Monocrystal Silicon Rod Manufactured with Czochralski Method
Numerical Study on a Drop-on-Demand Micro Droplet Print Head
The Simulation on Double Tank Water Level Control Based MATLAB
Finite-Element Analysis of Melt Flow in a Vertical Twin-Roll Casting
The Simulation Optimization for Job-Shop Scheduling Based on Plant Simulation Using Genetic Algorithm
Simulation Analysis for Supercavitation Projectiles Penetrating into Metal Targets
The Sensibility of Mold Dilation and Graphite Precipitation for the Simulated Porosity in Ductile Cast Iron
Numerical Simulation on Temperature Distributions to Cold Store
Research on Dynamic Balance of Linkage Considering the Influence of Elastic Deformation Based on Simulation
Hunting Search and Ant Colony Optimization Mechanisms on Modified Simplex Method for Grease Position Parameter Design
Heat Treatment Process Optimization Using Hunting Search and Ant Sense on Path of Steepest Ascent
Harmonic Analysis on Feed Kinematic Behaviors in Turning of Regular Polygon Section
Visualization of Random Particle Packing Model for Resin Concrete
Finite Element Analysis of Friction Effect on Deformation Behavior of Copper Rods in a Modified C2S2 Process
The Model and Simulation of SMT Production
Establishment of an ANSYS-Based Constitutive Modeling for Age Forming of Aluminum Alloy
Optimisation of Manufacturing Process Models via Intelligent Water Drop Algorithm
Modeling Flow Stress and Microstructural Development during Hot Working
The Pressure Distribution around Particles in Fluid in Confined Wedge Space
Effects of the Flow Speed on Dendritic Growth in Phase-Field Simulation of Binary Alloy with Convection
Process Parameters Modeling and Optimizing for Compound Machining with Ultrasonic Vibration on SiC Wafer
A Prediction Model of Deflection of Fixing Thin Parts
Simulation of the Wind Field of Gantry Cranes Based on FLUENT
Parameter Identification Model with the Control Term in Batch Anaerobic Fermentation
Modeling and Analysis of the Effect of Preloaded Pressing Force on Gap Formation during the Drilling of Double-Layered Material
The Research of Drilling Processing Technology Based on Fuzzy Optimization Design
Numerical and Experimental Research on the Feasibility for Plasma Arc Forming of Laminated Clad Metal Sheets Containing Defects
Establishment and Application of a Mathematic Model of Negative Pressure Equipment
Emerging Solutions in Modeling of Asymmetric Threats Regarding the Aeronautical System
Modeling and Optimization of Vibration Amplitude in Turning of Ti-6Al-4V Using Response Surface Methodology
Chapter 15: Materials Processing Technology
Modeling and Optimization of Vibration Amplitude in Turning of Stainless Steel AISI 304 at Various Tool Overhangs
Research and Application of Wire Cutting Mold Surface Roughness
Inserts Selection for Intermittent Turning of Magnesium Pieces
Vibration Drilling the 0Cr18Ni9Ti Stainless Steel Micro-Hole
The Effect of Temperature and Strain-Rate Sensitivity on Formability of AA 5754
A Study on DOE Methods for Hydromechanical Deep Drawing Process Parameters
Deformation of Serrated Chips Based on Minimum Energy Consumed for High Speed Machining
Research Progress of Methods to Improve Fatigue Strength of Welded Structures
Finite Element Mesh Model Analysis and Model Information Transform Method in Casting Simulation Process
Finite Element Numerical Simulation of Tubing Premium Connection
Surface Roughness Predictive Model of UNS A97075 Aluminum Pieces Obtained by Dry Turning Tests Based on the Cutting Forces
The Composition Forecasting Research for Cupola Melting Process
Study of the Machining Principle and Influencing of ELID Grinding on SiC
Simulation and Experimental Analysis of Moulding Processes of Glass Diffractive Optical Elements
Preliminary Study on the Rotational Indexing Machining Technology of Straight Bevel Gear
Rebound Deformation of Thin Part Caused by Clamping Force in End Milling
Experimental Study on the Possibilities to Decrease the Coefficient of Restitution after Impact
In Vitro Study on Dental Abrasive Finishing of Restorative Ceramics Using Diamond Burs in Dental Surgery
Practice and Analysis of the Technology of Direct-Tapping
Study on Microstructure Evolution in GH4169 Alloy Blade during Finish Forging
Advance in Chip Breaking Detection System by Monitoring of Cutting Temperature
Numerical Investigation of Manufacturability of Various Compound Shapes Using Sheet Hydroforming Process
Micro Hole Elliptical Supersonic Boring Quality Research
Influence of Technological Parameter for Ramie Yarn Hairiness on Compact Spinning with Suction Groove
Design and Performance Assessment of a 5-Axis Ultra-Precision Micro-Milling Machine
Rotary Ultrasonic-Assisted Grinding of Ceramic Material
Weld Quality Prediction for Resistance Microwelding of Fine Cu Wire Based on the Back-Propagation Neural Network
Study on Roller Profile for Cam Forming by Cross Wedge Rolling
Structure Design and Experimental Research on Spiral Boring Tool
The Effect of Axial Cutting Edge Angle on the Axial Milling Force of Helical Milling
The Effect of Welding Materials on 1Cr18Ni9Ti and 2Cr13 Steel Welding Joints Microstructure and Mechanical Properties
Temperature Field and Extrusion Load in Needle Piercing Extrusion Process Based on Ingot Billet for Large 7075 Aluminum Alloy Tube
Stress Field Simulation of Compound Cast Rollers during Centrifugal Casting Process
Simulation and Analysis of Stroke-Controlled Tube Hydroforming by Finite Element Method
Effects of Press on Compression Molding Bonded NdFeB Magnets’ Quality
Research of Fatigue Stress Cracking for Injection Mold Cavity Based on Ansys Workbench
Mechanism for Mechanical Properties of the A357 Connection Beam Casting from Solidification
Tooth-Leap Shaping Method for Helical Gears
Research on Friction Behavior in Tube Hydroforming Process
Predictive of Electron Beam Focus Position by Metal Powder Temperature
Design of LPDC Process for Thin-Walled Casting Based on Numerical Simulation
The Effect of Vibration on the Surface Topography in Micro-Milling
Numerical Simulations of the Influence of the Tool Geometric Parameters on Cutting Forces and Temperatures in High-Speed Machining of Ti6Al4V
First Principles Calculation on Adsorption of S on Fe(100) with Different Pressure
Research on the Molding Technology of Bonded NdFeB Magnets
Precision Control Calculation Method and Forming Technology of Aluminum Alloy Base
Test Study of Nickel-Base Superalloy 718 Superfine Deep-Hole Drilling
Chapter 15: Materials Processing Technology
Processing of Grinder Plate with Bone Chips Removal Facilities Based on CAD/CAM
Study of Ageing Treatment on Spray Forming Al-Zn-Mg-Cu Alloy
The Research on Fatigue of Crankshaft with the Method of Explicit Dynamic
The Influence of Longitudinal Magnetic Field on DCEN MAG Welding
The Design of X-Ray Testing System of SMT Solder
Study of Solid Solution Treatment on Spray Deposited 7A04 Alloy
Grinding Performance of Metal-Bonded CBN Wheels with Regular Pores
Experimental Study of Ultrasonic Vibration Drilling Ceramic Material
Study on the Two-Side Direction Burr in Grinding-Hardening Machine Based on Orthogonal Experimental Method
FEM-Based Design and Analysis of a Smart Cutting Tool with Internal Cooling for Cutting Temperature Measurement and Control
Experimental Investigation of Mechanical Micro Machining for AL6061-T6 Material
Multi-Objective Optimization of the Loading Path in Tube Hydroforming Process Using NCGA
Effect of Charge Action on the Annular Molten Metal of Spray Forming
Experimental Study on Drying Process of Green Body in Gelcasting of Metal Part
Shape Forming of Alumina by Step Pressure-Vacuum Hybrid Slip Casting
Comparsion of Foundry Properties of Traditional Foundry Sand and Microspheres
The Influence of the Center-to-Center Distance on the Accuracy of the Serration with the New Gear Hob
Experimental Evaluation of Surface Roughness in Orthogonal Micro-Milling Processes
Transient Liquid Phase Bonding of Aluminum Using Aluminum Base Interlayer under Argon Flux
Microstructure of Al-Li Alloy Electron Beam Welding Joint after Post-Weld Heat Treatment
Analysis of Thermal Stress during of Twin-Roll Casting of Magnesium Alloy
The Technology of Multistage Extrusion for Thin Walled Brass Cylinder
The Effect of Strain Field on Texture and Microstructure Evolution in Homogeneously Cold Rolled 93/7 Brass
Influence of Inner Cooler on Flow of Molten Steel in Slab Continuous Casting Mold
The Simulation and Experimental Analysis of Non-Abrasive Cryogenic Polishing on Metal Cylindrical Surfaces
The Effect of Mill Temperature on the Texture and Microstructutre Evolution in Warm Rolled a-Brass
Numerical Analysis of Liquid Ammonia Storage Tank Welding Stress
Numerical Simulation on the Multi-Point Forming of Sail Surfaces under Force-Displacement Separated Control
Automatic Segmentation of Pores in Weld Images Based on Transition Region Extraction
Effect of Die Angle on Electromagnetic Riveting Interference
Study of Bulging-Pressing Compound-Deforming Automobile Axle Housing with a Common Press
Prediction on Cutting Heat of the Simulation in NC Lathe
Influence of Surface Remelting Process on Corrosion Resistance of Welding Joints for SUS304 Stainless Steel by Electrode Arc Welding
Analysis of Microstructure and Micro Mechanical Properties for Weld Joints of 1000MPa Class Steel by Nanoindentation Technique
Stress Analysis and Failure Mechanism of H13 Steel Hot-Forging Die for Automobile Engine Crankshaft
Key Technologies Research on Color Contour Map of 3D Injection Molding Simulation Results
Numerical Simulation of the Effect of Punch Paths on the Quality of Sheet Metal Stretch Forming
Numerical Simulation on the Influence of Heated Mold Continuous Casting Process Parameters to Solid-Liquid Interface
Minimum Quantity Lubrication (MQL) Using Ranque – Hilsch Vortex Tube (RHVT) for Sustainable Machining
Rapid Prototyping of Aerodynamics Research Models
Study on Hot Stamping Process of Cannonball Body Semiproduct Based on Numerical Simulation
Supply Abrasive System of Premixed Abrasive Jet and Derusting Application
Microstructure and Recrystallization Behavior of an as-Extruded PM Nickel-Base Superalloy
A Study of Hollow Jet on Spray Forming
Numerical Simulation for Technological Parameters of Vibratory Stress Relief in Large Welding Structures
The Adaptive Control of Grinding Force of CNC Cam Grinder Based on Neural Network
Contribution to Milling of Materials on Ni Base
Advances in Theoretical Investigation of Work Hardening for Metal Cutting
Analysis of Volumetric Shrinkage and Optimization of Process Parameters in Injection Molding
The Sealing Welding of Helium-Filled Hole on Nuclear Fuel Rod
Automatic Welding Method and Main Parameters Calculation of Tube Connected Five-Star Feet
Effect of Different Contents of CeO2 on Microstructure and Properties of Roller Surface Alloyed by Laser
Study on Ausform Finishing Process and Gear Tooth Deformation for Hardened Gears
Research on Tool Wear and Compensation Method of Ultrasonic Milling
Research Status of High-Pressure Water Jet Incremental Sheet Metal Forming and Research on a New Method of the Straight-Walled Sheet Metal Part Forming
Influences of Blank Holding Force on Stamping of Large Ellipsoidal Heads Based on Simulation
Investigation of High Cycle and Low Cycle Fatigue Interaction on Fatigue Behavior of Welded Joints
Optional Roughing Tool Diameter Sequence Determination for Pocket: Integrated Geometric Characteristics and Processing Rules
Adaptive Model to Apply the Upper-Bound Theorem in Plain Strain Forging
Finite Element Analysis of Pharmaceutical Tablet Compaction
Study on Extending Tool Life of Micro WC Drills by Various Protective Coatings
Welding Deformation Controlling for the Truck Rack Girder
Experimental Investigation on Cutting Performance of Face Milling Cutter
Molding Plano-Convex Lenses Using a through-Hole WC/Co Plate as the Mold
Discussing for a Rapid & Flexible Casting Design Method Based on Modeling, Simulation and Rapid Prototype Machine
An Optimization Design for Coefficient of Weld Reinforcement in Rapid Prototyping Based on Robotic Pulse MAG Forming
Numerical Study of Transverse Impact Response of Single-Lap Adhesively Bonded Joint
Finite Element Analysis of the Combined Effect of Strain Hardening and Friction in Elementary Processes of Forging
Study on Machining Characteristics of Ultrasonic Vibration Assisted Micro-EDM
Study on Thinning of a Boron-Doped Polycrystalline Diamond Wheel-Tool by Micro Rotary W-EDM Approach
Analysis of Main Optimization Techniques in Predicting Surface Roughness in Metal Cutting Processes
Robust Process Design towards through-Silicon via Quality Improvement Based on Grey-Taguchi Method
Investigation of Vibration and Surface Roughness in Micro Milling of PMMA
Overviews of the Behavior of Heat Transfer of Soft-Contact Electromagnetic Continuous Casting Mold
An Investigation of Heat Affected Zone of Round Steel Rods Welded by Friction Welding
Helical Drills Wear during Drilling of a New ELC Austenitic Stainless Steels
Development of Mathematical Model for Chip Serration Frequency in Turning of Stainless Steel 304 Using RSM
Chapter 16: Laser Processing Technology
Femtosecond Laser Micromachining of High Quality Groove on Sapphire Surface
Investigation into Indirect Selective Laser Sintering Alumina Ceramic Parts Combined with Cold Isostatic Pressing
Variable White–Light Filaments Induced by Femtosecond Laser in PM567-Doped PMMA
Simulation of Temperature Field and Thermal Stress Field during Laser Drilling
Low-Temperature Polycrystalline Silicon Thin-Film Transistors Enhanced by Diode-Pumped Solid State Green Continuous-Wave Laser
Numerical Study on Strengthening Effect of Laser Shot Peening for Wrought Magnesium Alloy
Research of Fiber Laser Cladding Technology on Shaft-Parts
The Research on the Quality of the Cutting Mouth for Laser Blanking
Micro Dimple Fabrication on OFHC Copper by Laser Shock Processing
Laser Instant Shaping of Surface Microstructure Based on Function
Laser Ablation of Ti-Al Alloy in Vacuum and Air Environments
Research and Design of Laser Scribing Robot Based on Surface Matching
Effect of Laser Irradiation Parameters on Healing Fatigue Damage for Polycrystalline Copper Film
Chapter 17: Mechanical Behavior and Fracture
Failure Analysis on Spring of Boiler Drum Safety Valve
Mechanical Analyze of Casing Failure with Sand Production in Loose Sandstone Reservoir
Crack Propagation and Simulation of Thermal Fatigue
Study on Eliminating the Effect of Bending Moment in Torque Measurement
Wave Induced Deformation and Stress Responses in HDPE Circular Net Cage: A Numerical Approach
Effect of Initial Grain on Mechanical Properties of AZ31 Alloy during Warm Forming
Twin-Shear Yield Criterion for V-Notches Brittle Fracture under Mixed Modes
Application of the R-Function Theory and Least Square Method for Torsion Problem with H-Shaped Cross-Section
Stress Analysis under Cu Bump Bonding Process
Test of Metal Material Fracture Toughness by Finite Element Simulation and Moire Interferometry
On the Measurement of Roller Skew of Tapered Roller Bearings
A Novel Triangle Element Formulation for Static Analysis of Solids
Study on Crack Detection System of PC Beam Surface
The Prediction of the Mechanical Properties of Gray Cast Iron Based on the Anatomy Experiment of the Engine Cylinder Head
Fatigue Strength of Shaft with Diameter Enlarged Partially by Cyclic Bending and Axial Compressive Loading
Analytical Procedure for Geometrical Evaluation of Flat Surfaces Formed by Multiple Indentation Processes
Mechanical Properties of AlMgB14 Prepared by Field-Activated, Pressure-Assisted Synthesis Process
Constitutive Equations for a Model of Nonlocal Plasticity which Complies with a Nonlocal Maximum Plastic Dissipation Principle
A Consistent Formulation of Constitutive Relations for a Model of Nonlocal Viscoplasticity
Prediction of Surface Fracture of 6061 Al Processed by Equal-Channel Angular Pressing
Chapter 18: Tooling Testing and Evaluation of Materials
Quality Assessment of Weldable Steel Mark P355NH from Decompression Chamber Construction for Diving
Influence of Low-Level Voltage in Pulse ECM on Electrode Wear and Machining Accuracy
Effect of GaN Cap Layer on the Electrical Properties of AlGaN/GaN HEMT
A Simple and Sensitive Spectrophotometric Method for the Determination of Trace Ruthenium with its Catalytic Effect on the Oxidation of Rhodamine 6G by KBrO3 in Micellar Media
Experimental Study on Friction Damping Characteristics of Metallic Materials with Non-Conforming Contact
Thermal Deformation in a Static Pressure Dry Gas Seal
Wear Resistance of Nano TiN Strengthen High Chromium Cast Iron
Probabilistic Safety Factor of Soil Liquefaction
Study on Mathematical Model of Radial Runout Error
Analysis of Dimensional Accuracy of Spun Parts by Taguchi Approach
Evaluation of Residual Stresses in Butt-Welded Joints by Residual Magnetic Field Measurements
Parametric Analysis of Shear Behavior of Concrete Beams Reinforced with Continuous FRP Rectangular Spirals
A Practical Evaluation Approach to Form Deviation for Surface of Revolution Based on Discrete Point Coordinate Data
Influence of the Metal Sheet Parameters on the Results of the Erichsen Test
Chapter 19: Thermal Engineering Theory and Applications
Temperature Model of an Advanced Artificial Lift Technology--Cyclic Nature Gas Heat Insulation and Geothermal Temperature Heating Technology
Unsteady Numerical Simulation and Ground Tests of a Tailplane Electrothermal De-Icing System
Induction Heating Furnace Temperature Control Based on the Fuzzy PID
Thermal Design and Thermal Analysis of Control Cabinet for Pattern Sewing Machine
Prediction of Heat Dissipation Effect by Simulating Radiator Group of Mining Dump-Truck
Effect of Processing Parameters on Heat Transfer Performance of the Heat-Pipe Grinding Wheel
Analysis of Unsteady State Heat Conduction Performance in Anisotropic Materials
Sub-Optimal Control for Nonlinear Heat Equations
Numerical Predicts of Flow and Heat Transfer in Joule-Heated Rectangular Pool
The Gas Phase Reaction Crystallization Mechanisms of Amorphous SiCN Ceramic Annealed in Vacuum
The Two-Scale Finite Element Estimates for Thermoelasticity in Perforated Structure with Boundary Layer
Investigation on Numerical Calculation of Thermal Boundary Resistance between Superconducting Magnets
Research on Structural Analysis of Steering Based on Thermal-Structure
Necessity Analysis of Tundish Heating Technology Application
Thermal Analysis and Research of Multi-Chip Component Substrate Based on Different Thermal Conductivity Models
Study on Thermal Deformation of Machining Center’s Spindle Box Based on ANSYS
Design and Fabrication of Micro-Variable Radiator
Chapter 20: Detection and Control Technology
Design and Manufacturing of a Constant Volume Test Combustion Chamber for Jet and Flame Visualization of CNG Direct Injection
Rolling Bearing Fault Diagnosis Based on Blind Source Separation
The Application for Underwater Special Monitoring Equipment Based on the PELCO-D Protocol
Investigation of Machining Characteristics of Ultrasonic Vibration Assisted ECM
A Case of Structural Integrity of Ageing Fighter Aircraft Leveraging on Condition Maintenance Methodology
Propagation Characteristic in 2D Phononic Crystals with Bending Linear Defect
System of Premixed Abrasive Jet Cleaning and Derusting on Steel Tube Inwall
On-Line Detection Distribution Strategy Research of Complex Surface Based on Bayesian Networks
Method of Identifying Key Quality Characteristics in Multistage Manufacturing Process Based on PLSR
Transformer Fault Diagnosis of Rough-Neural Network Based on MEA
Hydrodynamic Noise and Radiated Mechanism of 3D Cavity
The Study on the Ultrasonic Testing and Defects in Quantitative Analysis for the Scroll-Type Profile
Concurrent Tolerancing Design Based on Time Value of Manufacture-Quality Loss Cost
Survey and Analyze the Line Output Characteristics in Inkjet Printing
A Directional Multivariate Control Chart for Monitoring Univariate Autocorrelated Processes
The Application Research of PIC16F877 in the Pulse Power of WEDM-HS
Development of In Situ SAXS Detection System for the Pre-Oxidation and Carbonization of PAN Precursor
New Methold on Power Transformer Fault Diagnosis
A New Detection Way for Single- Phase to Ground Fault Based on Energy Function Intergral and Wavelet Packets
A New Circuit Detection Method and an Anomalous Frequency Recognition Algorithm
Pre-Buckling Transverse Free Vibration of an Asymmetrically Supported Euler Beam Subjected to Distributed Follower Forces
The Effect of Damper Components on the Performance of Impact Damping
The Study of Fault-Diagnosis Method of Reciprocating Compressor Based on Fuzzy Fault Tree Theory
Wind Speed Forecasting Based on Variable Weight Combination Model of Neural Network and Grey Model
Analysis and Design of PCB Multistage Process Quality Management Information System
High-Speed and High-Accuracy Schemes of Coordinate Calculation and End Point Judgment for Elliptic Interpolation
A Six-Probe Scanning Method for Guide Rail Straightness Measurement
Noise Character of Cooling Tower and Control Discussion
The Evaluation about Vibratory Mixing Methods
Gear Fault Diagnosis Based on Harmonic Wavelet Packet and BP Neural Network
Study on Chip-Breaking Technology for Numerical-Control Varying-Feed Drilling of Deep Hole
Research on a Method of Fault Signal Extraction Based on Improved Algorithm
The Error Analysis and Detection of A/C Axes Bi-Rotary Milling Head
Prediction of Top Coal Caving Ability Based on Support Vector Machine
Adaptive Interpolation of Tool Posture Vector in Five-Axis Flank Milling
Effect of Structure Parameters on Dynamic Characteristics of Piezoelectric Vibrator in Ultrasonic EDM Processing
Improved Atomic Force Microscopic Inspection Process of Liquid Crystal Display
Fault Diagnosis of Chemical Process Based on ACO-BP Neural Network
Fault Diagnosis for AP1000 Plant Feed Water System Based on the Fault Petri Net
Application Study on Automatic Particle Count Technology Used in Fuel Filtration Efficiency Test
Multiaperture Connection Method for Three-Dimensional Mesasurement Based on Quaternion
The Analysis on Controllability of Angular Ball Bearings with Considering the Installation Errors
Application of Copula in Reliability Theory
Application of FastICA Algorithm in Wind Turbine Condition Monitoring
