Sonstiges, Englisch, Band Volumes 217-219, 2920 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Sonstiges, Englisch, Band Volumes 217-219, 2920 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Applied Mechanics and Materials
ISBN: 978-3-03795-310-5
Verlag: Trans Tech Publications
The studies presented in this book cover the topics of: composites, micro/nano-materials and equipment, alloy materials, steel, polymer materials, optical/electronic/magnetic materials, energy materials and new energy technology, environmentally-friendly materials and waste utilization, biomaterials and preparation technology, thin films, structural materials and earthquake-resistant structures, functional materials, surface-engineering/coatings, modeling, analysis and simulation, materials processing technology, laser-processing technology, mechanical behavior and fracture, tooling testing and evaluation of materials, thermal engineering theory and applications, detection and control technology.
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Aluminium Titanate-Aluminia Composites Synthesized by Heterogeneous Precipitation MethodElectrochemical Behavior of Copper in the (NaCl-KCl-CuCl2) Molten SaltCorrosion Resistance of E-Glass Fiber in Simulated Oilfield EnvironmentA Study of Spectral Changes of Reactive DyesPiezoelectric Properties of 1-3 Piezoelectric Tubular CompositesEffects of B2O3 Flux on the Synthesis and Microstructure of Aluminum Metal Matrix CompositesThe Melting Temperature of CaO-(2CaO?SiO2)-B2O3-SiO2-(Al2O3) Slag SystemCalculation Model of Mass Action Concentrations for CaO-Al2O3-SiO2 Slag SystemStudy on Sintering Properties and Crystallization of Fused Quartz Ceramic Materials Containing BN-B4CEffect of Electromagnetic Stirring on Morphology Evolution of Mg2Si in Hypereutectic Al-Si Alloy CompositeNumerical Simulations of SFRC Projectile Penetrating into Limestone Using FEM/SPH Coupling MethodResearch on the Optimization of Porosity in Resin Mineral CompositePreparation and Properties of Closed Cell Aluminum?Fly Ash Floating Beads Composite FoamApplication of Advanced Carbon Fiber Composite Material in Sport EquipmentsTensile Behavior of 2.5D C/SiCN CompositesMicrostructure Evolution of In Situ Synthesized VC Reinforced Iron Matrix CompositesStudy on Antistatic PET/PTT-CNTs CompositesModeling of the Tensile Deformation Behavior of SiCp/Fe CompositesLow-Temperature Preparation of Porous Cordierite-Mullite Ceramics Using Rice Husk as Silica Source and Pore-Forming AgentReliability Based Buckling Analysis of Composite Panels with Tophat Stiffened TopologyDoping of Diamond Crystals with a Dopant of P3N5The Effects of the Aging Temperature on the Microstructure and Corrosion Resistance of the Nickel-Phosphorus Composite Al2O3 DepositInfluence of Phosphorous on the Tribological Properties of PM Iron-Based Sintered CompositesEffect of Pouring Temperature on the Microstructure of HCCI/Steel Composite HammerMicrostructure of In Situ Particles/7055Al Matrix Composites with Deep Cryogenic TreatmentEffect of CaO/SiO2 Ratio and TiO2 on Glass-Ceramics Made from Steel Slag and Fly AshExperimental Studies of Glass Reinforced Aluminum (GLARE) Bolted JointConductive Rubber Nanocomposites as Tensile and Pressure SensorsEffect of Coupling Agent Treatment on the Properties of Silicon Carbide Filled LLDPE CompositesHigh Strain-Rate Compressive Response of Epoxy CompositesPreparation of Nickel/Poly(m-Toluidine) Composites and its Magnetic PropertiesTribological Characteristics of Si3N4-HBN Ceramic Materials for Dry ApplicationEvaluation of Drag Reduction Agent Used in Oil Pipeline TransportationStudy of Wettability of Vinyl Resin on Carbon FiberConcrete Crack Control Technology in Chongqing Inch Container Terminal Box Letter of Application in EngineeringStudy on Physical and Dynamic Properties of BR Based Composites Filled with Different Particle Size of MagnesiaThermodynamic Parameters Analysis of MgS Superfine Inclusion in Grain BoundaryOptimization Design for Laminated Composite Structure Based on Kriging ModelStudy on the Performance of Pearl Fiber Composite YarnSteel-Concrete Bond Deterioration under Repeated Loading for Different Confinement LevelsTest and Analysis on Anti-Penetration Performance of Ceramic Multi-Layer Composite MediumStudy on Dynamics Performance of Nano-ConcreteEffect of Doping Transition Metal Ions on Photocatalysis of TiO2 NanowiresMechanism of Nanofibre Fabrication by MeltblowingSynthesis and Luminescent Properties of Micro ? Nanometer Ca0.69Sr0.23(PxMoy)O4:0.05Eu3+ by Co Precipitation ? Melted-Salt MethodExperimental Study on Ultrasonic Grinding of Nano-ZrO2 Ceramics by Single-GritTribological Characteristics of Nano Structured Nickel Coatings for Renivating of Extruding ShaftsIn-Plane Thermoelectric Generator of Carbon Nanotube Membrane Driven by Thermal Gas FlowSolid State Chemical Reaction Synthesis and Characterization of Nanocrystalline Cerium Oxalate under Ultrasonication SpectraApplication of Tetragonal Nano-Zirconia in Ceramic TeethEffect of Starting Powders on Microstructure and Properties of Silicon Nitride NanoceramicsProduction of Nano NiO Particle with Chemical Precipitation Method and their CharacteristicsStudy of Modification Mechanism of Ultrafine Silica Modified by PAMAMSize-Controlled Synthesis of Magnetite Nanoparticles from Iron Acetate by Thermal DecompositionPreparation and Characterization Nano-Cellulose and its Surface Modification by Silane Coupling AgentPolyethersulfone Composites Reinforced by Silica NanoparticlesPreparation and Application Study of Nano-Sized Organic Bentonite Used for Composite Flame RetardantImprovement Effect of Functionalized Cnts on Mechanical and Thermal Properties of Epoxy MatrixEffects of Deformation Ratio above Recrystallizaton Temperature on Microstructure and Properties of 2A12 Aluminum AlloyEffects of Pre-Ageing on Thermomechanical Treatment Process of 2A12 Aluminum AlloyInfluence of Stiffener Structural Parameters on Compress Buckling Performance of Alloy Aluminum Stiffened PanelAge-Hardening Characteristics of Cu-Ni-Si Alloy after Cold DeformationThe Application of Abaqus Software in the Online-Quenching Process of 6005 Aluminum Alloy ProfileStudy on Structure Stability of Ti-Al Multilaminate Material at High TemperatureStudy on Tribological Performances of Friction Plate on MW Wind PowerProperties of Low-Carbon Al2O3-C Refractories with Different Critical Particle SizeResearch on the Tribology Performance of Copper-Bismuth Bearing MaterialEffect of Electromagnetic Stirring Process Parameters on Semi-Solid Fluid Field of Aluminum AlloyCoupled Simulation on Temperature Field and Microstructure Formation Process of K4169 Superalloy Blade in Investment CastingTensile Creep Behavior of Two NiAl-Based AlloysEffect of Divorced Eutectic on the Liquation Crack Susceptibility of Al-Cu AlloyReaction Hot-Pressed Sintering of Grain-Refined TiB2-TiC Composites by AlN-SiC Solid SolutionThe Heterogeneity of Composition and Microstructure in Cast Large Sized 3104 Alloy SlabEffect of Initial Texture on the Development of Microstructure and Mechanical Properties in AZ31 Magnesium Alloy after Rolling at 300?CInfluence of Jacket and Filling Materials Characteristics on PELE EffectsInfluences of Ultrasonic Wave on Polycrystalline Alumina Fibers SynthesizedRheological Behavior of Semisolid AlSi6Mg2 Alloy at Transient StateWorkability of ZK60A Alloy Depending on MicrostructureResearch on Synthesizing Process under Ultrasound Coupling and Refining Performance of Al-Ti-C Grain RefinerEffect of Alloying Elements on Microstructure, Texture Development, and Mechanical Properties of Magnesium AlloysBlock Shear Strength of Single Shear Four-Bolted Connections with Aluminum Alloys ? Experiment and Design Strength ComparisonAnalysis on Fatigue Crack Propagation and Fractography of A7075 Aluminum AlloyResearch on Cold-Rolled Bimetal of High-Tin Aluminum Alloy and SteelEffects of Cu and Sb on Corrosion Resistance of ZnAl27 AlloyVery Long Life Fatigue Behavior of Q345 Bridge SteelThe Study on the Precipitation Behavior of the Second Phase Particles for Fine Grain and High Strength IF SteelMicrostructure Evolution of Dynamic Recrystallization of 42CrMo Steel during Multi-Stage Forging by FEMThe Corrosion Behavior of a Low Carbon Bainite Steel in Simulated Atmosphere Environment Containing Chloride and/or SulfideThe Analysis of Magnesium Compound Desulfurizer and Compound Desulfurizer in PANGANGEffect of Phosphorus on the Mechanical Properties and Microstructure of Interstitial Free SteelStudy on the Key Technologies of Direct Reduction for Rotary Hearth Furnace Dealing with Carbon Containing PelletsStudy on Utilization Technology of Vanadium Titanium Magnetite Based on the Rotary Hearth Furnace Direct Reduction ProcessStudy on the Lining Erosion of Deep Reduction Electric Arc Furnace in Smelting Metallized Pellets Process Produced by Vanadium Titanium MagnetiteStudy on Desulphurization Technology in RH Refining for Electric SteelThe Application of the High Alumina Composite Slag in Semi-SteelmakingStudy on Residual Stress in High-Speed Cutting NAK80 Mold-SteelUltrasound-Assisted Electrospark Deposition of 3Cr2NiMo SteelEffect of the Strain Rate on Mechanical Properties and Microstructure of High Strength Low Alloy Steel HC340LAA Study on Recrystallization Behavior of Low Carbon Bainitic Steel during Multi-Pass DeformationCalculation of Carbon Diffusion Coefficient in Spheroidal Graphite Cast IronEffects of Sintering Conditions on Properties of a Warm Compacted Stainless Steel PowderMicromechanical Modelling for Bauschinger Effect of Dual Phase SteelResearch on Activities of CaO-SiO2-B2O3 (Al2O3, Fe2O3) Slag SystemStudy on Corrosion Behaviors of the PTA Plant in HalogenEBSD Investigation on the Primary Recrystallization in Warm Rolled Ti-IF SteelGAP-Like Scheduling Model of Byproduct Gas in Iron and Steel ProcessEffects of B2O3 and CaF2 on Melting Properties of CaO-Based SlagsEffect of Blowing Agent and Polyethylene Glycol on Cellular Structure and Mechanical Properties of Chloroprene RubberEvaluation of Mechanical Properties of Polyamide 6(PA6) Filled with Wollastonite and Inorganic Modified WollastoniteResearch on Magnetorheological Elastomers Air Spring Based NR/SBR RubberResearch on Electrical Insulating Property of Disk Insulator in High Voltage GIS Insulated Grounding ModuleThe Characterization and Synthesis of Polyaniline Doped by Peroxo?Polytungstic AcidPerformance Enhancements of Polysulfone Ultrafiltration Membranes through Blending with Functionalized Carbon Nanotubes and Polyaniline NanofibersEffect of DS on the Structure and Charged Properties of SPSf/PVDF Blend Membranes via Immersion Precipitation ProcessSynthesis and Characterization of Polyaniline CopolymerApplied Research on Modified Polyacrylonitrile Fiber with CollagenThe Comparative Analysis of Wood-Plastic Raw Material to Heat up the Experiment and Simulation of Heat Transfer ProcessInfluence of Diisocyanates on Dynamic Mechanical Properties of Castable Polyurethane ElastomersStudy on the Properties of Melt Spinning PAN/MWNTs Composite FibersPreparation and Properties of Polybenzoxazine/Lignin AlloySynthesis and Effect of Polycarboxylate Superplasticizer with Two Different Molecular Polyethers as Side ChainEffects of Thixotropic Agent and Storage Time on the Rheological Properties of Epoxy ResinA New Textile Sizing Prepared by the Hemp Core Cellulose EthersComparison of the Properties of Akund/Cotton Blended Yarn Produced by Compact Spinning with Pure Cotton YarnAdhesion Effect Model of a Single Biomimetic Fiber Based on JKR Contact TheoryStudy on Processing of Cotton / Akund Fibers Blended YarnEffect of Low Molecular Weight Ethylene Homopolymer on Structure and Properties of Bimodal High Density PolyethyleneStudy on Magnesium Hydroxide Sulfate Whisker and Organo- Modified MMT on Flame Retarded Liquid Silicone RubberApplication of SLP Method in Rubber Powder WorkshopStudy on the Structure and the Properties of Akund FiberThe Reseach of the Morphology and Mechanical Properties of PA6/POE-g-MAH/OMMT Ternary BlendsShear Strength of Void Slab with Polystyrene FormsThe Influence of Temperature on Toughness of PA6/POE-G-MAH/OMMT BlendsThe Fluidity and AC Impedance of Polypropylene Composites Filled with Activated Carbon BlackAC Electrical Properties of Titanate-Linkcoupled Carbon Black Filled Polypropylene CompositesThe Effect of Hydrophilic Components of Zinc Based Copolymer on its Self Polishing BehaviorStudy on the Synthesis of Polyester Type Waterborne Polyurethane and Modifying by Nano-Sized ParticlesThe Effects of Synthesis Conditions on PUF Microcapsule MorphologyEffect of Nano-CuO on Luminous Intensity of Pyrotechnics Composite Containing KClO4 and AlExplorative Research on the Magnetostriction of Carbon Black Filled Polypropylene CompositesThe Synthesis and Morphology Control of High after-Grow Intensity SrAl2O4: Eu, Dy PhosphorsThe Lithium Doping Effect on (Na0.5K0.5)NbO3 Lead-Free Piezo-Ceramics Structure Stability and Ferroelectric CharacteristicsEfficiency Inorganic Thin Film Solar Cells with Flexible SubstrateThe Development of Permanent Strong Magnets and its Application in the Deironing of KaolinOptical and Dielectric Characteristics of Photoactive Layer Thin Films for Organic Photovoltaic CellsA LED Reflector Design and Research for Uniform Rectangular IlluminationThe Special Magnetic Transition in FeX/(In2O3)1-X Granular FilmsSize and Sp2 Fraction Dependence of Energy Gaps in Carbon DotsAn Alternative Design of Light Delivery System for Heat-Assisted Magnetic RecordingResearch on the New Multilayer Composite Lightning Electromagnetic Shielding MaterialsSynthesis of Diester Based Magnetic FluidFluorescence Response of Pyrene/Pyrrole Copolymer to Hg2+ in the Aqueous SolutionPhotocatalytic Oxidation Thiophene Using Nano-TiO2Luminescent Properties of Zn2SiO4:Eu3+,Dy3+ Phosphors via Sol-Gel ProcessProbing the Structure and Visible Light Photocatalytic Mechanism of LaVO4/TiO2 Composite Using XRD, BET, and EPREffects of Y2O3 and In2O3 on the Electrical Properties of SnO2-Based VaristorsThe Performance Analysis of LPG as the Vehicle FuelStudy on Influence of Geometric Parameters on DMFC Performance Based on Experiments and CFD SimulationsStudy on the Preparation and Properties of Li4Ti5O12 PowderThe Influences of Catalysts in the Thermal Decomposition of Barium Nitrate as Pyrotechnic OxidantsA Study on PEMFC Faults Diagnosis Based on Wavelet AnalysisExperimental Studies on Enriching Vanadium from Vanadium Tailings Carbon-Containing Pellets by EAF MeltingEffect of Fenton Reagent on the Thermal Stability of Proton-Exchange Membrane for Fuel CellImproving the Electrochemical Performance of LiFePO4/C Cathode by Selection of Carbon SourceResearch of LiFePO4 as Positive Electrode MaterialsAnalysis and Evaluation of Active Based on MnOx-CeO2 Catalysts in Process of Particle Combustion for Diesel Particulate FilterStudy on the Harmless Treatment of Valve Regulated Lead-Acid Batteries in SubstationsMPPT Control of Photovoltaic Cells Based on Dynamic Recurrent Fuzzy Neural NetworkModeling of Photovoltaic Cell Based on BP Neural Networks Improved by MEAComparative Analysis of Excess Sludge and Digested Sludge Pyrolysis CharacteristicsSynthesis of Magnetic Photocatalystic Particles for Bacterial ControlA Novel Method for POP Stacking WarpageSoil Pollution Prevention Planning of Poyang Lake Ecological Economic ZoneTCF High-Brightness Bleaching NaOH-AQ Pulp of Fast-Growing Poplar with Low Kappa NumberStudy on Removal of Iron and Manganese from Mine Water by Method of MedicamentThe Impact of Paper Formation on PrintabilityMechanism of CeVO4/TiO2 Photocatalytic Degradation of VOCs under Visible Light Irradiation: Electrochemical, Photoluminescence and Active Oxygen Species StudySol-Gel Synthesis of N-Doped Mesoporous TiO2 with High Crystallinity and High Visible Light Photocatalytic ActivityStudies on Phosphate Removal from Aqueous Solution by Honeycomb-Cinder SlagProperties of the Recycled Aggregate ConcreteProperties of Municipal Solid Waste Incineration (MSWI) Fly Ash during Heating ProcessPreparation and Characterization of Diatomite-Based Porous CeramicsRecycle of Trimethyl Chlorosilane from Chlorosilane WasteSynthesis of Cationic Starch Flocculant and PropertiesA Study on the Strengthened Oxygen Delignification of NaOH-AQ Pulp of Fast Growing Poplar with Low Kappa NumberResearch on the Application of Expanded Perlite Cement Grinding AidsStudy on the Concentration Process of Glutamic Supernatant Fluid by Vacuum Membrane Distillation and the Reuse of Product WaterStudy on the Reclamation Technology of Alkaline Phenol Formaldehyde Resin Bonded SandBiodegradability of Cellulose Fibers and the Fabrics in Activated SludgeExperimental Research on Hybrid Strategy and Desulfurization for White Mud and Coal SlurryStudy on Strategy Improvement of Yeast Transformation Experiment Based on ANP MethodDesign, Synthesis and Biological Evaluation of Novel Fentanyl Analogues as Agonist of ?-Opioid ReceptorAdhesive Evidence for Gecko-Inspired Biomimetic Fiber: Combination of Experiments and ModelingResearch on the Scale Density Extraction Technology of Cashmere and WoolGC?MS Analysis of Petroleum Ether and Butyl Alcohol Extracts of Longan SeedsElectricity Production in Microbial Fuel Cells Using Brush Bio-Anode and Bio-Cathode Made of PAN-Based Carbon FibersSeparation of Curcumine (a Functional Food Colourant Material) from Rhizoma curcuma longae by Aqueous Two-Phase SystemsNovel Preparation and Characterization of Calcium-Strontium HydroxyapatiteCrosslinking Characteristics of an Genipin-Fixed Porcine Acellular Dermal MatrixQuantitative Effects of Oxygen Supply on Mycelia Growth and Extracellular Polysaccharide of Ganoderma tsugaeAnalyze Efficacy of Traditional Chinese Medicine Based on OSC-OPLS-DAParticle Loosening on the Surface of Dense Hydroxyapatite in WaterResearch on the Relationship between Strength and Chemical Composition of Hemp FiberLignocellulosic Microparticles Reconstituted from Legume Straw-1-Butyl-3-Methylimidazolium Chloride-Water SolutionEstablishment and Analysis of the Fermentation Medium Model of Phellinus igniariusMeasurement of Total Phenolics, Antiradical Capacity and Reducing Power of Extracts of Chinese Medicinal PlantsPreparation Technology of Nanometer Ceramic Particles Reinforced Metal-Matrix Graded Coating by Laser Multi-Layer CladdingSelective Growth of B-Doped Diamond on Si-Doped Diamond FilmCharacterization of Antibacterial Film Based on PVA and Clove Oil/?-Cyclodextrin Inclusion ComplexDeposition and Application of CVD Diamond Film on the Interior-Hole Surface of Shaped-Wire Drawing DieThe Preparation and Properties of Ce0.5Ti0.5O2 Ion Storage FilmsFacile Deposition of Zirconia Optical Films Based on the Solvothermal Treatment of Zirconyl Nitrate-Water-Methanol SystemBridge Action of Double-Deck Films Interface ElectronsThe Micro-Indentation Detection of Multilayer Structured Transparent Film Based on Dark Field IlluminationSynthesis of Lithium Thin Film by Electrodeposition from Ionic LiquidCorrosion Behaviors in Simulated Body Fluid for TiO2 Films Deposited on AZ31 Magnesium Alloys by Magnetron SputteringA Uniaxial Tensile Method and its Device Design Scheme Based on Single Rotary Drum Applied for Polymer FilmsDeposition and Characterization of Boron-Doped HFCVD Diamond Films on Ti, SiC, Si and Ta SubstratesPreparation and Conductive Properties of Ag Thin Film by DC Magnetron Sputtering MethodStructure and Photocatalytic Properties of Fixed Porous TiO2 Composite Film on Steel Prepared by Plasma Electrolytic OxidationStudy of Parylene-C Thin Film Deposited on Flat SubstratesResearch on the Influence of N2 Partial Pressure on the Performance of Ti/Al/N Composite FilmShear Strength of Atypical Reinforced Concrete Pile by Permanent Uni-Wall SystemFresh Concrete Anti-Carbonization and Application of Patching Material in Carbonizing Concrete StructureA Summary of Strength Formation Mechanism of Light Wall MaterialEffect of Binders on the Properties of Chromia/Alumina Refractory CastablesThe Influence of Seismic Behavior of Web-Type Column - Transfer Structure Caused by Rigidity Variation of the Transfer StoreyThe Analysis of a Frame Structure with Additional Shear-Bending Bars under Horizontal Earthquake ActionDisplacement-Based Seismic Design of Steel Frames Strengthened by Buckling-Restrained BracesPreparation of Porous Fe-Ni Soft Magnetic Powders by Fe-N Alloys TransformationThe Research of Microparticle Filling Agent in Protecting Hydrocarbon Reservoir TechnologyInfluence of Grain Composition and Sintering Temperature on Performance of Silicon Carbide Refractory MaterialEffect of MnCO3 on ZnO-Pr6O11-Co2O3-Cr2O3 Varistor CeramicsEtching Volume Effect on the Morphology of Silicon Etched by Metal-Assisted Chemical MethodThe Research of the Bending Crack Resistance Ability of Reinforced Concrete Beam Mixed with Emulsified AsphaltResearch on Fire-Resistant Fabric Properties of Basalt FiberElectric-Rheological Properties of Nanometer Titania Doped with Europium Oxide in Hydroxyl Silicone OilEffects of Cross-Linking Agents on Synthesis of Heat-Resistant Resin from Ethylene TarSynthesis and Characterization of Polyaniline Conductive Composite FilmsStudy on the Performance of Woven Basalt Filament Diaphragm FabricAnalysis of the D3O Materials in Baseball Protective ClothingSynthesis of ZnIn2S4 via a Surfactant-Assisted Hydrothermal Method and their Visible Light Photocatalytic Properties of MO DegradationEffect of Doping Nb2O5 on Microstructure and Properties of Piezoelectric Ceramics PSZTVisible Light Photocatalytic Degradation of Reactive Deep Blue K-R by BiOI and BiOCl0.2Br0.1I0.7Synthesis and Characterization of Thermally Stable B-Doped Polycrystalline DiamondExperimental Investigation on Autoclaved Aerated Concrete Using Palladium-Platinum TailingsSynthesize Boron Doped Diamond Films on Porous Ti Substrates by DC-PCVDApplications of Titanium Dioxide Photocatalytic Technology in Degrading VOC in CarsUse of Finite Element Method in Study of Air Conditioning ClothesSynthesis of a Novel Hexanedioyl Thiourea Resin and its Adsorption Properties for Ag(I)A Study of Double-Coating of Hot-Dip AluminizingEffects of Heat Treatment Conditions on the Mechanical Properties of AA 2024 AlloyThe Study on Preparation Process Optimization of Ceramic Membrane LayerThe Effects of Substrate Negative Bias Voltage on Morphology and Properties Base on Multi-Arc Ion PlatingResearch on Corrosion Resistance of MWEDM Surface with Different Electrical ParametersResearch of a Plasma Arc Metal Surface Strengthening RobotThe Investigation on Wear Resistance of Fe-Based Alloy Coating by Argon Arc CladdingFriction and Wear Behavior of CaO-MgO-Al2O3-SiO2 Glass-Ceramics Prepared by Waste Casting SandsCorrosion Characteristic of Double Glow Plasma Hydrogen-Free Carburizing on TitaniumFeatures of Workpiece and Orificed Cathodes in Triple-Cathode Plasma Surface Alloying SystemCFD Modelling of Cadmium Telluride (CdTe) Thin Film Coating with Inline AP-MOCVDResearch on the Tribological Properties of Ni-W Alloy Electric Brush Plating Coatings at Elevated TemperaturesProcess Optimization of Reaction Nitrogen Arc Welding Cladding TiCN/Fe Metal Ceramic Composite CoatingStudy on TiAl(CN) Particle Reinforce Composites Coating Prepared by Reaction Nitrogen Arc Welding Cladding ProcessResearch on Transfer Coater with High Precision for ElectrodesMachined Surfaces Texture Analysis Based on Hough Transform and Run Length StatisticsWear Resistance of Plasma Surface Copper Infiltrated on 0Cr18Ni9 Stainless SteelEffects of H2O2 on Characteristics of Films Formed on Surface of Ti6Al4V in Electrolyte by Micro-Arc OxidationAnalysis on Residual Stress in TiN Coating with Different ThicknessesA New Surface Reconstruction Algorithm for Noisy 3D Unorganized PointsEffect of Multilayer Technology on Surface Properties of Diamond Coated Silicon Carbide with Surface DefectsPreparation of Hydroxyapatite Coatings by Anodizing-Electrodeposition on Pure TitaniumEffects of C6H8O7 and C3H8O3 in the Na2SiO3 Electrolyte on Characteristics of Coating Formed on ZAlSi12Cu2Mg1 by Micro-Arc OxidationOptimization of Process Parameters of Ni-TiN-CeO2 Binary Nanocomposite Coatings by Ultrasound-Pulse ElectrodepositionStudy on the Control System of Vertical Tin-Plating Process for Semi-Flexible Coaxial CableTool Deflection Error Regularization and Compensation in End Milling of Contour SurfacesStudy on the Microstructure of FeCrAl/Aluminum Bronze Composite Coatings Prepared by Supersonic Electric Arc-SprayingMicrostructure and Wear Resistance of Laser Cladding Nano-Al2O3/MCrAlY Composite Graded Coating on TiAl AlloyMicrostructure and Wear Properties of Laser Synthesized Composite Coatings on Ti-6Al-4VInvestigation on the Interfacial Bonding Strength between Ni-P-W/Al2O3 Composite Coatings and NdFeB MatrixSynthesis and Evaluation of Anionic Gemini SurfactantOptimization of Processing Parameters for Electrolysis and Plasma PolishingSpringback Prediction Using the Split-Ring Test Based on a Combined Anisotropic Hardening ModelModeling and Movement Simulation of the Interior Transmission Mechanism of the Hoist Based on ProEReliability Optimization Design Based on the Blind Number TheoryNumerical Simulation of Compressive Experiment for Rock with a Natural InterlayerFinite Element Simulation Analysis of Hydraulic Support Based on Virtual Prototype TechnologyNumerical Simulation for Cup Shell Deep Drawn by Powder Flexible CavityModeling and Simulation of Pharmaceutical Powder CompactionThree-Dimensional Arc Modeling inside Non-Transferred Plasma TorchInfluence of Charges Shape on a Closely Air Blast LoadingA Study on Stoma Arrangement of Air-Cushion Lamination and Numerical Simulation of the Pressure FieldThe Refined Theory of Axisymmetric Circular Cylinder in One-Dimensional Hexagonal QuasicrystalsNumerical Analysis on Cooling Process of Monocrystal Silicon Rod Manufactured with Czochralski MethodNumerical Study on a Drop-on-Demand Micro Droplet Print HeadThe Simulation on Double Tank Water Level Control Based MATLABFinite-Element Analysis of Melt Flow in a Vertical Twin-Roll CastingThe Simulation Optimization for Job-Shop Scheduling Based on Plant Simulation Using Genetic AlgorithmSimulation Analysis for Supercavitation Projectiles Penetrating into Metal TargetsThe Sensibility of Mold Dilation and Graphite Precipitation for the Simulated Porosity in Ductile Cast IronNumerical Simulation on Temperature Distributions to Cold StoreResearch on Dynamic Balance of Linkage Considering the Influence of Elastic Deformation Based on SimulationHunting Search and Ant Colony Optimization Mechanisms on Modified Simplex Method for Grease Position Parameter DesignHeat Treatment Process Optimization Using Hunting Search and Ant Sense on Path of Steepest AscentHarmonic Analysis on Feed Kinematic Behaviors in Turning of Regular Polygon SectionVisualization of Random Particle Packing Model for Resin ConcreteFinite Element Analysis of Friction Effect on Deformation Behavior of Copper Rods in a Modified C2S2 ProcessThe Model and Simulation of SMT ProductionEstablishment of an ANSYS-Based Constitutive Modeling for Age Forming of Aluminum AlloyOptimisation of Manufacturing Process Models via Intelligent Water Drop AlgorithmModeling Flow Stress and Microstructural Development during Hot WorkingThe Pressure Distribution around Particles in Fluid in Confined Wedge SpaceEffects of the Flow Speed on Dendritic Growth in Phase-Field Simulation of Binary Alloy with ConvectionProcess Parameters Modeling and Optimizing for Compound Machining with Ultrasonic Vibration on SiC WaferA Prediction Model of Deflection of Fixing Thin PartsSimulation of the Wind Field of Gantry Cranes Based on FLUENTParameter Identification Model with the Control Term in Batch Anaerobic FermentationModeling and Analysis of the Effect of Preloaded Pressing Force on Gap Formation during the Drilling of Double-Layered MaterialThe Research of Drilling Processing Technology Based on Fuzzy Optimization DesignNumerical and Experimental Research on the Feasibility for Plasma Arc Forming of Laminated Clad Metal Sheets Containing DefectsEstablishment and Application of a Mathematic Model of Negative Pressure EquipmentEmerging Solutions in Modeling of Asymmetric Threats Regarding the Aeronautical SystemModeling and Optimization of Vibration Amplitude in Turning of Ti-6Al-4V Using Response Surface MethodologyModeling and Optimization of Vibration Amplitude in Turning of Stainless Steel AISI 304 at Various Tool OverhangsResearch and Application of Wire Cutting Mold Surface RoughnessInserts Selection for Intermittent Turning of Magnesium PiecesVibration Drilling the 0Cr18Ni9Ti Stainless Steel Micro-HoleThe Effect of Temperature and Strain-Rate Sensitivity on Formability of AA 5754A Study on DOE Methods for Hydromechanical Deep Drawing Process ParametersDeformation of Serrated Chips Based on Minimum Energy Consumed for High Speed MachiningResearch Progress of Methods to Improve Fatigue Strength of Welded StructuresFinite Element Mesh Model Analysis and Model Information Transform Method in Casting Simulation ProcessFinite Element Numerical Simulation of Tubing Premium ConnectionSurface Roughness Predictive Model of UNS A97075 Aluminum Pieces Obtained by Dry Turning Tests Based on the Cutting ForcesThe Composition Forecasting Research for Cupola Melting ProcessStudy of the Machining Principle and Influencing of ELID Grinding on SiCSimulation and Experimental Analysis of Moulding Processes of Glass Diffractive Optical ElementsPreliminary Study on the Rotational Indexing Machining Technology of Straight Bevel GearRebound Deformation of Thin Part Caused by Clamping Force in End MillingExperimental Study on the Possibilities to Decrease the Coefficient of Restitution after Impact
In Vitro Study on Dental Abrasive Finishing of Restorative Ceramics Using Diamond Burs in Dental SurgeryPractice and Analysis of the Technology of Direct-TappingStudy on Microstructure Evolution in GH4169 Alloy Blade during Finish ForgingAdvance in Chip Breaking Detection System by Monitoring of Cutting TemperatureNumerical Investigation of Manufacturability of Various Compound Shapes Using Sheet Hydroforming ProcessMicro Hole Elliptical Supersonic Boring Quality ResearchInfluence of Technological Parameter for Ramie Yarn Hairiness on Compact Spinning with Suction GrooveDesign and Performance Assessment of a 5-Axis Ultra-Precision Micro-Milling MachineRotary Ultrasonic-Assisted Grinding of Ceramic MaterialWeld Quality Prediction for Resistance Microwelding of Fine Cu Wire Based on the Back-Propagation Neural NetworkStudy on Roller Profile for Cam Forming by Cross Wedge RollingStructure Design and Experimental Research on Spiral Boring ToolThe Effect of Axial Cutting Edge Angle on the Axial Milling Force of Helical MillingThe Effect of Welding Materials on 1Cr18Ni9Ti and 2Cr13 Steel Welding Joints Microstructure and Mechanical PropertiesTemperature Field and Extrusion Load in Needle Piercing Extrusion Process Based on Ingot Billet for Large 7075 Aluminum Alloy TubeStress Field Simulation of Compound Cast Rollers during Centrifugal Casting ProcessSimulation and Analysis of Stroke-Controlled Tube Hydroforming by Finite Element MethodEffects of Press on Compression Molding Bonded NdFeB Magnets? QualityResearch of Fatigue Stress Cracking for Injection Mold Cavity Based on Ansys WorkbenchMechanism for Mechanical Properties of the A357 Connection Beam Casting from SolidificationTooth-Leap Shaping Method for Helical GearsResearch on Friction Behavior in Tube Hydroforming ProcessPredictive of Electron Beam Focus Position by Metal Powder TemperatureDesign of LPDC Process for Thin-Walled Casting Based on Numerical SimulationThe Effect of Vibration on the Surface Topography in Micro-MillingNumerical Simulations of the Influence of the Tool Geometric Parameters on Cutting Forces and Temperatures in High-Speed Machining of Ti6Al4VFirst Principles Calculation on Adsorption of S on Fe(100) with Different PressureResearch on the Molding Technology of Bonded NdFeB MagnetsPrecision Control Calculation Method and Forming Technology of Aluminum Alloy BaseTest Study of Nickel-Base Superalloy 718 Superfine Deep-Hole DrillingProcessing of Grinder Plate with Bone Chips Removal Facilities Based on CAD/CAMStudy of Ageing Treatment on Spray Forming Al-Zn-Mg-Cu AlloyThe Research on Fatigue of Crankshaft with the Method of Explicit DynamicThe Influence of Longitudinal Magnetic Field on DCEN MAG WeldingThe Design of X-Ray Testing System of SMT SolderStudy of Solid Solution Treatment on Spray Deposited 7A04 AlloyGrinding Performance of Metal-Bonded CBN Wheels with Regular PoresExperimental Study of Ultrasonic Vibration Drilling Ceramic MaterialStudy on the Two-Side Direction Burr in Grinding-Hardening Machine Based on Orthogonal Experimental MethodFEM-Based Design and Analysis of a Smart Cutting Tool with Internal Cooling for Cutting Temperature Measurement and ControlExperimental Investigation of Mechanical Micro Machining for AL6061-T6 MaterialMulti-Objective Optimization of the Loading Path in Tube Hydroforming Process Using NCGAEffect of Charge Action on the Annular Molten Metal of Spray FormingExperimental Study on Drying Process of Green Body in Gelcasting of Metal PartShape Forming of Alumina by Step Pressure-Vacuum Hybrid Slip CastingComparsion of Foundry Properties of Traditional Foundry Sand and MicrospheresThe Influence of the Center-to-Center Distance on the Accuracy of the Serration with the New Gear HobExperimental Evaluation of Surface Roughness in Orthogonal Micro-Milling ProcessesTransient Liquid Phase Bonding of Aluminum Using Aluminum Base Interlayer under Argon FluxMicrostructure of Al-Li Alloy Electron Beam Welding Joint after Post-Weld Heat TreatmentAnalysis of Thermal Stress during of Twin-Roll Casting of Magnesium AlloyThe Technology of Multistage Extrusion for Thin Walled Brass CylinderThe Effect of Strain Field on Texture and Microstructure Evolution in Homogeneously Cold Rolled 93/7 BrassInfluence of Inner Cooler on Flow of Molten Steel in Slab Continuous Casting MoldThe Simulation and Experimental Analysis of Non-Abrasive Cryogenic Polishing on Metal Cylindrical SurfacesThe Effect of Mill Temperature on the Texture and Microstructutre Evolution in Warm Rolled a-BrassNumerical Analysis of Liquid Ammonia Storage Tank Welding StressNumerical Simulation on the Multi-Point Forming of Sail Surfaces under Force-Displacement Separated ControlAutomatic Segmentation of Pores in Weld Images Based on Transition Region ExtractionEffect of Die Angle on Electromagnetic Riveting InterferenceStudy of Bulging-Pressing Compound-Deforming Automobile Axle Housing with a Common PressPrediction on Cutting Heat of the Simulation in NC LatheInfluence of Surface Remelting Process on Corrosion Resistance of Welding Joints for SUS304 Stainless Steel by Electrode Arc WeldingAnalysis of Microstructure and Micro Mechanical Properties for Weld Joints of 1000MPa Class Steel by Nanoindentation TechniqueStress Analysis and Failure Mechanism of H13 Steel Hot-Forging Die for Automobile Engine CrankshaftKey Technologies Research on Color Contour Map of 3D Injection Molding Simulation ResultsNumerical Simulation of the Effect of Punch Paths on the Quality of Sheet Metal Stretch FormingNumerical Simulation on the Influence of Heated Mold Continuous Casting Process Parameters to Solid-Liquid InterfaceMinimum Quantity Lubrication (MQL) Using Ranque ? Hilsch Vortex Tube (RHVT) for Sustainable MachiningRapid Prototyping of Aerodynamics Research ModelsStudy on Hot Stamping Process of Cannonball Body Semiproduct Based on Numerical SimulationSupply Abrasive System of Premixed Abrasive Jet and Derusting ApplicationMicrostructure and Recrystallization Behavior of an as-Extruded PM Nickel-Base SuperalloyA Study of Hollow Jet on Spray FormingNumerical Simulation for Technological Parameters of Vibratory Stress Relief in Large Welding StructuresThe Adaptive Control of Grinding Force of CNC Cam Grinder Based on Neural NetworkContribution to Milling of Materials on Ni BaseAdvances in Theoretical Investigation of Work Hardening for Metal CuttingAnalysis of Volumetric Shrinkage and Optimization of Process Parameters in Injection MoldingThe Sealing Welding of Helium-Filled Hole on Nuclear Fuel RodAutomatic Welding Method and Main Parameters Calculation of Tube Connected Five-Star FeetEffect of Different Contents of CeO2 on Microstructure and Properties of Roller Surface Alloyed by LaserStudy on Ausform Finishing Process and Gear Tooth Deformation for Hardened GearsResearch on Tool Wear and Compensation Method of Ultrasonic MillingResearch Status of High-Pressure Water Jet Incremental Sheet Metal Forming and Research on a New Method of the Straight-Walled Sheet Metal Part FormingInfluences of Blank Holding Force on Stamping of Large Ellipsoidal Heads Based on SimulationInvestigation of High Cycle and Low Cycle Fatigue Interaction on Fatigue Behavior of Welded JointsOptional Roughing Tool Diameter Sequence Determination for Pocket: Integrated Geometric Characteristics and Processing RulesAdaptive Model to Apply the Upper-Bound Theorem in Plain Strain ForgingFinite Element Analysis of Pharmaceutical Tablet CompactionStudy on Extending Tool Life of Micro WC Drills by Various Protective CoatingsWelding Deformation Controlling for the Truck Rack GirderExperimental Investigation on Cutting Performance of Face Milling CutterMolding Plano-Convex Lenses Using a through-Hole WC/Co Plate as the MoldDiscussing for a Rapid & Flexible Casting Design Method Based on Modeling, Simulation and Rapid Prototype MachineAn Optimization Design for Coefficient of Weld Reinforcement in Rapid Prototyping Based on Robotic Pulse MAG FormingNumerical Study of Transverse Impact Response of Single-Lap Adhesively Bonded JointFinite Element Analysis of the Combined Effect of Strain Hardening and Friction in Elementary Processes of ForgingStudy on Machining Characteristics of Ultrasonic Vibration Assisted Micro-EDMStudy on Thinning of a Boron-Doped Polycrystalline Diamond Wheel-Tool by Micro Rotary W-EDM ApproachAnalysis of Main Optimization Techniques in Predicting Surface Roughness in Metal Cutting ProcessesRobust Process Design towards through-Silicon via Quality Improvement Based on Grey-Taguchi MethodInvestigation of Vibration and Surface Roughness in Micro Milling of PMMAOverviews of the Behavior of Heat Transfer of Soft-Contact Electromagnetic Continuous Casting MoldAn Investigation of Heat Affected Zone of Round Steel Rods Welded by Friction WeldingHelical Drills Wear during Drilling of a New ELC Austenitic Stainless SteelsDevelopment of Mathematical Model for Chip Serration Frequency in Turning of Stainless Steel 304 Using RSMFemtosecond Laser Micromachining of High Quality Groove on Sapphire SurfaceInvestigation into Indirect Selective Laser Sintering Alumina Ceramic Parts Combined with Cold Isostatic PressingVariable White?Light Filaments Induced by Femtosecond Laser in PM567-Doped PMMASimulation of Temperature Field and Thermal Stress Field during Laser DrillingLow-Temperature Polycrystalline Silicon Thin-Film Transistors Enhanced by Diode-Pumped Solid State Green Continuous-Wave LaserNumerical Study on Strengthening Effect of Laser Shot Peening for Wrought Magnesium AlloyResearch of Fiber Laser Cladding Technology on Shaft-PartsThe Research on the Quality of the Cutting Mouth for Laser BlankingMicro Dimple Fabrication on OFHC Copper by Laser Shock ProcessingLaser Instant Shaping of Surface Microstructure Based on FunctionLaser Ablation of Ti-Al Alloy in Vacuum and Air EnvironmentsResearch and Design of Laser Scribing Robot Based on Surface MatchingEffect of Laser Irradiation Parameters on Healing Fatigue Damage for Polycrystalline Copper FilmFailure Analysis on Spring of Boiler Drum Safety ValveMechanical Analyze of Casing Failure with Sand Production in Loose Sandstone ReservoirCrack Propagation and Simulation of Thermal FatigueStudy on Eliminating the Effect of Bending Moment in Torque MeasurementWave Induced Deformation and Stress Responses in HDPE Circular Net Cage: A Numerical ApproachEffect of Initial Grain on Mechanical Properties of AZ31 Alloy during Warm FormingTwin-Shear Yield Criterion for V-Notches Brittle Fracture under Mixed ModesApplication of the R-Function Theory and Least Square Method for Torsion Problem with H-Shaped Cross-SectionStress Analysis under Cu Bump Bonding ProcessTest of Metal Material Fracture Toughness by Finite Element Simulation and Moire InterferometryOn the Measurement of Roller Skew of Tapered Roller BearingsA Novel Triangle Element Formulation for Static Analysis of SolidsStudy on Crack Detection System of PC Beam SurfaceThe Prediction of the Mechanical Properties of Gray Cast Iron Based on the Anatomy Experiment of the Engine Cylinder HeadFatigue Strength of Shaft with Diameter Enlarged Partially by Cyclic Bending and Axial Compressive LoadingAnalytical Procedure for Geometrical Evaluation of Flat Surfaces Formed by Multiple Indentation ProcessesMechanical Properties of AlMgB14 Prepared by Field-Activated, Pressure-Assisted Synthesis ProcessConstitutive Equations for a Model of Nonlocal Plasticity which Complies with a Nonlocal Maximum Plastic Dissipation PrincipleA Consistent Formulation of Constitutive Relations for a Model of Nonlocal ViscoplasticityPrediction of Surface Fracture of 6061 Al Processed by Equal-Channel Angular PressingQuality Assessment of Weldable Steel Mark P355NH from Decompression Chamber Construction for DivingInfluence of Low-Level Voltage in Pulse ECM on Electrode Wear and Machining AccuracyEffect of GaN Cap Layer on the Electrical Properties of AlGaN/GaN HEMTA Simple and Sensitive Spectrophotometric Method for the Determination of Trace Ruthenium with its Catalytic Effect on the Oxidation of Rhodamine 6G by KBrO3 in Micellar MediaExperimental Study on Friction Damping Characteristics of Metallic Materials with Non-Conforming ContactThermal Deformation in a Static Pressure Dry Gas SealWear Resistance of Nano TiN Strengthen High Chromium Cast IronProbabilistic Safety Factor of Soil LiquefactionStudy on Mathematical Model of Radial Runout ErrorAnalysis of Dimensional Accuracy of Spun Parts by Taguchi ApproachEvaluation of Residual Stresses in Butt-Welded Joints by Residual Magnetic Field MeasurementsParametric Analysis of Shear Behavior of Concrete Beams Reinforced with Continuous FRP Rectangular SpiralsA Practical Evaluation Approach to Form Deviation for Surface of Revolution Based on Discrete Point Coordinate DataInfluence of the Metal Sheet Parameters on the Results of the Erichsen TestTemperature Model of an Advanced Artificial Lift Technology--Cyclic Nature Gas Heat Insulation and Geothermal Temperature Heating TechnologyUnsteady Numerical Simulation and Ground Tests of a Tailplane Electrothermal De-Icing SystemInduction Heating Furnace Temperature Control Based on the Fuzzy PIDThermal Design and Thermal Analysis of Control Cabinet for Pattern Sewing MachinePrediction of Heat Dissipation Effect by Simulating Radiator Group of Mining Dump-TruckEffect of Processing Parameters on Heat Transfer Performance of the Heat-Pipe Grinding WheelAnalysis of Unsteady State Heat Conduction Performance in Anisotropic MaterialsSub-Optimal Control for Nonlinear Heat EquationsNumerical Predicts of Flow and Heat Transfer in Joule-Heated Rectangular PoolThe Gas Phase Reaction Crystallization Mechanisms of Amorphous SiCN Ceramic Annealed in VacuumThe Two-Scale Finite Element Estimates for Thermoelasticity in Perforated Structure with Boundary LayerInvestigation on Numerical Calculation of Thermal Boundary Resistance between Superconducting MagnetsResearch on Structural Analysis of Steering Based on Thermal-StructureNecessity Analysis of Tundish Heating Technology ApplicationThermal Analysis and Research of Multi-Chip Component Substrate Based on Different Thermal Conductivity ModelsStudy on Thermal Deformation of Machining Center?s Spindle Box Based on ANSYSDesign and Fabrication of Micro-Variable RadiatorDesign and Manufacturing of a Constant Volume Test Combustion Chamber for Jet and Flame Visualization of CNG Direct InjectionRolling Bearing Fault Diagnosis Based on Blind Source SeparationThe Application for Underwater Special Monitoring Equipment Based on the PELCO-D ProtocolInvestigation of Machining Characteristics of Ultrasonic Vibration Assisted ECMA Case of Structural Integrity of Ageing Fighter Aircraft Leveraging on Condition Maintenance MethodologyPropagation Characteristic in 2D Phononic Crystals with Bending Linear DefectSystem of Premixed Abrasive Jet Cleaning and Derusting on Steel Tube InwallOn-Line Detection Distribution Strategy Research of Complex Surface Based on Bayesian NetworksMethod of Identifying Key Quality Characteristics in Multistage Manufacturing Process Based on PLSRTransformer Fault Diagnosis of Rough-Neural Network Based on MEAHydrodynamic Noise and Radiated Mechanism of 3D CavityThe Study on the Ultrasonic Testing and Defects in Quantitative Analysis for the Scroll-Type ProfileConcurrent Tolerancing Design Based on Time Value of Manufacture-Quality Loss CostSurvey and Analyze the Line Output Characteristics in Inkjet PrintingA Directional Multivariate Control Chart for Monitoring Univariate Autocorrelated ProcessesThe Application Research of PIC16F877 in the Pulse Power of WEDM-HSDevelopment of In Situ SAXS Detection System for the Pre-Oxidation and Carbonization of PAN PrecursorNew Methold on Power Transformer Fault DiagnosisA New Detection Way for Single- Phase to Ground Fault Based on Energy Function Intergral and Wavelet PacketsA New Circuit Detection Method and an Anomalous Frequency Recognition AlgorithmPre-Buckling Transverse Free Vibration of an Asymmetrically Supported Euler Beam Subjected to Distributed Follower ForcesThe Effect of Damper Components on the Performance of Impact DampingThe Study of Fault-Diagnosis Method of Reciprocating Compressor Based on Fuzzy Fault Tree TheoryWind Speed Forecasting Based on Variable Weight Combination Model of Neural Network and Grey ModelAnalysis and Design of PCB Multistage Process Quality Management Information SystemHigh-Speed and High-Accuracy Schemes of Coordinate Calculation and End Point Judgment for Elliptic InterpolationA Six-Probe Scanning Method for Guide Rail Straightness MeasurementNoise Character of Cooling Tower and Control DiscussionThe Evaluation about Vibratory Mixing MethodsGear Fault Diagnosis Based on Harmonic Wavelet Packet and BP Neural NetworkStudy on Chip-Breaking Technology for Numerical-Control Varying-Feed Drilling of Deep HoleResearch on a Method of Fault Signal Extraction Based on Improved AlgorithmThe Error Analysis and Detection of A/C Axes Bi-Rotary Milling HeadPrediction of Top Coal Caving Ability Based on Support Vector MachineAdaptive Interpolation of Tool Posture Vector in Five-Axis Flank MillingEffect of Structure Parameters on Dynamic Characteristics of Piezoelectric Vibrator in Ultrasonic EDM ProcessingImproved Atomic Force Microscopic Inspection Process of Liquid Crystal DisplayFault Diagnosis of Chemical Process Based on ACO-BP Neural NetworkFault Diagnosis for AP1000 Plant Feed Water System Based on the Fault Petri NetApplication Study on Automatic Particle Count Technology Used in Fuel Filtration Efficiency TestMultiaperture Connection Method for Three-Dimensional Mesasurement Based on QuaternionThe Analysis on Controllability of Angular Ball Bearings with Considering the Installation ErrorsApplication of Copula in Reliability TheoryApplication of FastICA Algorithm in Wind Turbine Condition Monitoring
