Selected, peer reviewed papers from the Second International Conference on Applied Mechanics, Materials and Manufacturing (ICAMMM 2012), November 17-18, 2012, Changsha, China
Buch, Englisch, 2236 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 3900 g
ISBN: 978-3-03785-579-9
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
- Technische Wissenschaften Maschinenbau | Werkstoffkunde Maschinenbau
- Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde
- Technische Wissenschaften Technik Allgemein Computeranwendungen in der Technik
- Technische Wissenschaften Elektronik | Nachrichtentechnik Nachrichten- und Kommunikationstechnik Regelungstechnik
- Technische Wissenschaften Technik Allgemein Mess- und Automatisierungstechnik
- Mathematik | Informatik EDV | Informatik Angewandte Informatik Computeranwendungen in Wissenschaft & Technologie
Weitere Infos & Material
Preface and Conference Organization
Chapter 1: Composites and Polymers
Finite Element Simulating of C/SiC Composite Bolt
The Preparation of CaZrO3 Coating Ultra-Fine Nickel Powders via Chemical Deposition
Theoretical Study of Energy-Level Splitting of Cs2NaPrCl6 Crystal
Preparation and Characterization of Fe3+-Doped TiO2/Diatomite Composite
Research on VARTM Technology for Fabricating Basalt Fiber/Vinyl Ester Composites
Design, Synthesis and Photophysical Properties of Novel Tetrahedral Carbazole-Bridged Silanes with Benzimidazole Groups
Load-Carrying Capacity of Cantilevers of Anti-Flood Barriers Made of FRP Composite Structural Profiles
Tribological Behavior of Si3N4-hBN Ceramic Materials Sliding against Fe-B Alloy without Lubrication
Isothermal Crystallization Behavior of Poly (L-lactic Acid)/ Surface-Grafted Silica Nanocomposites
Synthesis of High Solid Content Acrylic-Polyurethane Hybrid Emulsions with Low Viscosity
Electrochemical Polymerization and Electrochromic Properties of Poly(3-methoxythiophene)/NiO Composite Films
Preparation of Fly Ash Hollow Glass Bead/Titanium Dioxide Composites by Chemical Precipitation
Preparation of Aluminum Composite Ceramic Membrane by Inorganic Precursor Sol-Gel Method
Tribological Characteristics of Different Components on C/C-SiC Composites Fabricated by Warm Compacted In Situ Reaction
Magnetoelectric Effect of the Ba0.80Sr0.2TiO3-CoFe2O4 Ceramic Composites by Molten-Salt Synthesis Method
An Experimental Investigation of the Dynamic Mechanical Behaviors of Hollow Spheres Filled Syntactic Foam
Experimental Research on Failure of Filament Wound Composite Pipe under Axial Tension
Influence of Si3N4 Addition on the Mechanical Properties and Microstructure of Unfired A12O3-C Slide Plate
Performance and Microstructure of TiN/Cu EDM Electrodes
Effect of Fiber Volume Fraction on Low Cycle Fatigue Behavior of Al2O3f/Al-Si Composites
The Rotational Extrusion Alloying Al-Ti Composite
Preparation and Humidity Control Performances of a Novel Composite Humidity Control Paper
Fatigue Residual Properties of Ti/APC-2 Nanocomposite Laminates after Low-Velocity Impact
The Effects of Carbon Black Loading on the Characteristics of Carbon Composite Bipolar Plate by Utilizing Graphite Waste Products
Effect of Deposited Angle on Structure and Surface Morphology of Fluorocarbon Films Deposited by Pulsed Plasma Thruster
Rheological Properties of RLDPE/LLDPE Blends
Study on the Damping Properties of Multi-Layered Gradient Materials Based on Organic Hybrids
Study on the Rheological Behavior of Neat PLA Chips and PLA Composites for Meltblowing Nonwovens
Effect of Polymeric Coupling Agent on Mechanical Properties of Kenaf Fiber / Polystyrene Composites
Study of the Impact Toughness Experiment of SiCp/Al FGM and Numerical Simulation
Kinetics of Non-Isothermal Degradation of PFA
Surface Structure and Protein Resistance of PMMA/PS Copolymer Coatings
Experiment and Modeling Study on the Compaction Behavior of Bindered Textile Preforms
Chapter 2: Micro/Nano Materials
Ag Doped Co3O4 Nanowire Arrays as an Electrode Material for Electrochemical Capacitors
The Fabrication of MnO2 Nanoparticle for Supercapacitor Application
Study of Tension Process of Single Crystal Titanium Nano-Rod Based on the Molecular Dynamics
Preparation and Characterization of TiO2 Nanoparticles / CNTs Composite Particles
Hydrothermal Synthesis of Tungsten Oxide Nanoparticles
Synthesis and Characterization of Nano Cerium Oxide by Surfactant-Assisted Precipitation Method
Preparation of Nano-Scale Piece of Sericite by Using Mechanical Exfoliation Method and Ultrasonic Method
Facile Synthesis and Electrochemical Characterization of PbO@C Nanocomposites
Preparation and Characterization on PU/CS Nanofiber Membrane
Research on Electrospinning Process of Pullulan Nanofibers
Envelope Method Applied on the AZO Thin Films
CdSe/ZnO Core/Shell Semiconductor Nanocrystals: Synthesis and Characterization
Chapter 3: Environmental-Friendly Materials and Biological Materials
Effects of Braiding Parameters on Radial Compressive Property of Intraluminal Stents
Treatment of Chroma from Tannery Effluent by Flocculant
The Role of Copper in the Growth of Methylosinus trichosporium IMV 3011 and Poly-ß-Hydroxybutyrate Biosynthesis
Synthesis of PAN Fiber Supported Fe(bpy)32+ for RhB Degradation under Visible Light Irradiation
Preparation and Adsorption Performance of Cu (II)-Imprinted ALG-CTS Complex Microspheres
Effects of Enzymes Treatment on Structure and Properties of Acellular Dermal Matrix
Experimental Investigation of Microbial Paraffin Removal Technology
Studies on the Property Changes of Environmental Degradation Mulching Film and Polyethylene Mulching Film in Water Environment
Ramie Fiber Modification Trials under Different Conditions
Cell Proliferation on the Hydroxyapatite Ceramics Derived from Animal Bones
The Thermal Hysteresis Temperature of ‘HPLC-6’: Langmuir Model
The Effect of Alkali Treatment to the Properties of Banana Fibers
Synthesis and Characterization of Spherical Aggregations of Organic-ZnS Hybrids
Chapter 4: Iron, Steel and Alloys. Metallurgical Engineering
Improvement of Wear Resistances of AISI 316L Austenitic Stainless Steels by Anodic Nitriding
Study of the Damage of Drills in Dry Drilling of NM360 Steels
An Experimental Study on the Shear Strength of Steel Structures Joints
Dissimilar Welding between AISI 304 Stainless Steel and AISI 1020 Carbon Steel Plates
Microstructure Evolution and Property of Austenitic Stainless Steel after ECAP
3-D Simulation of H-Beam Multi-Pass Hot Rolling and Microstructure Evolution
Multicomponent Y-M-Al-Co(M=Ce, Nd or Pr) Amorphous Alloys Developed by Equiatomic Substitution
The Constitutive Relation of Total Strain Theory Based on the Simple Experimental Data by the Application of Titanium Alloy
Effect of Isothermal Ageing on Damping Capacity of Cu-20.4Al-8.7Mn
Microstructures and Damping Capacities of AZ91D-0.7%Si Alloy
Multi-Fractional Research on Pore Distribution in the Sinter Ore with Different Basicity
Study on the Corrosion Resistance of High Boron Iron-Based Alloy
Study on Corrosion Behavior of Hot Extruded Mg-1Ca-0.5Mn Alloy in Sodium Chloride Water Solution
Model Analysis on Particles Size Distribution of Beryllium Powder
Effect of Sintering Temperature on Microstructure and Mechanical Properties of WC-16TiC-xTaC-9Co Cemented Carbides
Multi-Fractal Behaviors in Grain Size Distribution of Low Silica Sinter
Comparison Analysis of Aircraft Aluminum Alloy Corrosion Damage Forecasting Method
Anisotropy Affecting Dendrite Growth of Fe-C Alloy in a Forced Flow
Comprehensive Mathematical Model of Full Oxygen Blast Furnace with Top Recycle Gas Heated by Gasifier
Microstructure and High Temperature Mechanical Properties of Mg-1Si-1Y Alloy
Chapter 5: Materials Processing and Chemical Technologies
Numerical Simulation of Equal Channel Angular Pressing for Multi-Pass in Different Routes
Effects of Electromagnetic Field and Lubricate Condition on the Surface Quality of Aluminum Alloy Billet during LFEC Processing
A New Method of Processing High-Precision Micro-Hole with the Femtosecond Laser
Multi-Field Coupled Analysis on Preparation Process of CZ Crystal
The Research and Optimization of a 6061 Aluminum Rectangular Tube Extrusion Using Porthole Dies According to the Parameter of Split Ratio
Characterization of Stress Concentration Degree Based on 2-Dementional Magnetic Memory Signals
Process Optimization Based on Artificial Neural Network of Plant Oli to Preparing Biodiesel
Influence of Different Damp-Heat Setting Techniques on Crimp-Hair Setting Effect
Preparation and Apply of Adjustable Angle Machine for Friction Material on Mixing and Granulation
Microstructure Evolution of Al/Fe Liquid/Solid Interface
Modeling and Experiment of the Cutting Force for Aluminium Alloy Work-Piece
Functional Finishing of Cotton and Polyester/Cotton Fabrics with a Fluorine-Containing Water and Oil Repellent
A Method for Determination of Friction Coefficient in Sheet Metal Forming of Magnesium Alloy
Study of Using Internal Thread Whirling in Machining Titanium Dental Implant
Effect of Specific Ions in Preparing Water on Viscosity of Polyacrylamide Solution
Process Optimization of Synchronizer Ring Gear Extrusion
Physical Simulation on Forging Method with Horizontal V-Shaped Anvil
Study on the Forming Process Parameters of Sleeper Fixed Reinforcing Plate Using Orthogonal Experiment Method by Numerical Simulation Technology
Experimental Research of Al2O3 Micro-Particles Production by Supercritical Hydrolysis
Stress-Etching Using Laser Electrochemical Micromachining with Masks
Prediction of a New Form of the Cutting Tool According to Achieve the Desired Surface Quality
Numerical Simulations of Combustion and Decomposition Processes in Precalciner with Two Different Heights of Raw Meal Inlets
Influence of Melt Temperature on Structure of Polyacrylonitrile in Ionic Liquids during Plasticized Melt Spinning Process
A Study of Femtosecond Laser Machining Technology Applied in Air-Film Holes on Turbine Blades
FEM Simulation on Extrusion of Magnesium Alloys
Finite Element Analysis of High Speed Cutting Tool
Microwave-Assisted Synthesis of 2-(2-Nitroethenly)thiophene from 2-Thiophenecarboxaldehyde and Nitromethane
Research on Machining Accuracy in Milling Ti6Al4V Thin-Walled Component with Paraffin Reinforcement
Surface Modification of the Polyethersulfone Membrane by Low Pressure Argon Plasma Treatment
The Analysis of the Influence of Perforating Parameters on the Strength Security of Perforation String
The Casting Process Optimization of the Impellor of 65KZL Slurry Pump
Electrical and Optical Characterization of Cold Atmospheric Pressure Plasma Jet and the Effects of N2 Gas on Argon Plasma Discharge
Influence of Initial Temperature of Chilling Treatment on Residual Stress State of TIG Dressing Zone for T-Joint Welded Toe
Ignition Temperature and Stable Combustion Temperature of the In Situ Combustion Process
Copper-Based Mixed Oxides Catalyst of Water-Gas Shift Reaction for Fuel Cells: The Role of Alkali Charge
Analysis of HDPE Crystallization for Axial Symmetric Cast
Indoor Study of Viscosity Reducer for Thickened Oil of Huancai
Fluorescence Spectrum of CdTe Quantum Dots Solution in Ostwald Ripening Process at Room Temperature
Preparation and Characterization of High-Substituted Cationic Starches in Aqueous Solutions
Enhancement of Explosion Energy and Mechanical Strength of Energetic Material by Aluminum Fibre
Wear Analysis of Silicon Nitride (Si3N4) Cutting Tool in Dry Machining of T6061 Aluminium Alloy
Patent Analysis on Graphene Materials in Lithium-Ion Batteries
Study on Modification of UFRA by Enzyme Hydrolysis Prepared Oxidized Starch
Preparation of PCL/PVP/Ag Nanofiber Membranes by Electrospinning Method
Research and Development of the Low Twist Yarn
Influence of the Catalyst on the Synthesis of SIPE
Preparation and Application of Carboxymethyl Starch
Effect of Physical Factors on Viscosity of Polyacrylamide Solution Prepared by Oilfield Produced Water
Application of Twin Screw Extruder in Cellulose Dissolution with Ionic Liquid
Flow Characteristics of DC Plasma Torch Controlled by Magnetic Field
The Test of Amine Polymeric Alcohol Drilling Fluid System in Baka Block
Chapter 6: Buildings and Constructions. Materials and Technologies
Interpretation of the Early Hydration Procedure of Standard Cement Materials by Electrodeless Resistivity Method
Application of Magnesia-Phosphate Cement for Chromia/Alumina Castables
Cyclic Triaxial Tests of Saturated Clay and Stability Numerical Analysis of Inland Waterway Slope under Effect of Ship Wave
Geological Significance of Rare Earth Elements in Chinese Mount Huaying and their Applications
An Empirical Correlation between Unconfined Compression Strength and Curing Time for Cement-Soil
Seismic Vulnerability of Existing RC Buildings and Influence of the Decoupling of the Effective Masonry Panels from the Structural Frames
Study on the Technique of Filling Paste into Mine Goaf with Building Waste
Analysis of Waterproof Bonding Layer in Permeable Asphalt Pavement
Continuous Belt Mucking Technology of China Railway Tunnel Construction
Influence of Deep Foundation Pit Construction to the Surrounding Buildings - Take a Foundation Pit in Haikou as Example
Influential Factors and Structural Reliability
The Effect on the Dynamic Tests of Prestressed Concrete Simply-Supported Beams Caused by Bearing Constraints
FEM Analysis on a New Type of Anti-Tension Device
Chapter 6: Buildings and Constructions. Materials and Technologies
Test and FEM Analysis on a New Type of Anti-Wind Device
Response and Parameter Analysis of Reinforced Retaining Wall under Earthquake Loading
Shear Wall Construction in Buildings: A Conceptual Framework on the Aspect of Analysis and Design
Constitutive Behavior of Salt Rock Coupled of Creep Deformation and Damage Development
The Numerical Simulation and Optimization of the Pre-Splitting Crack’s Length in Underground Deep Hole Blasting
Analytic and Numerical Solutions of Load and Stress of Casing and Cement in Cementing Section
A Double Inequality Method for Calculate the Loading Capacity of a Sheet Pile DIMSP
Elastic Seismic Response of Steel-Concrete Composite Frames with Partial Interaction
An Analysis of the Collapse Strength of Down-Hole Tubings Loaded by Axial Compressive Forces and Bending Moment
Analysis of Premium Connection of Connecting and Sealing Ability Loaded by Axial Tensile Loads
Modeling the Mechanical Behaviour of a Subsea Guide Base Subject to Installation and Operations Loads
Experimental Study on PC Beams Dynamic Performance with the Itial Effective Prestress
Comparative Study on Ultimate Pullout Resistance Test and Theoretical Derivation of Flexible Pressurized Anchor with Numerical Simulation Result
The Coupled Effects of Thickness and Distance between Holes on Stress and Strain Concentrations of Uniaxially Loaded Tensile Plates
The Interaction of Holes on Stress and Strain Concentrations in Uniaxially Loaded Tensile Plates
Fractured Reservoir Blocking Dosage Calculation Method
Experimental Study on Capability of EPS Beads-Mixed Lightweight Soil
Hybrid Effects on Strength of Steel-Polypropylene Hybrid Fiber Reinforced Concrete under Uniaxial and Triaxial Compression
Effect of Dynamic Compaction on Red Sand Soil Filling Embankment
The Influence Factors of the Workability of Roller Compacted Concrete
Study on Cumulative Damage of Tunnel Shotcrete under Blasting
Study the Axial Force-Time History of Reinforced Retaining Wall under Earthquake Loading
Effect of Admixtures Rich in Aluminium on Expansion due to Alkali-Silica Reaction
Application Performance of Aminosulphonic Acid-Based Superplasticizer
Effects of Adding Method of a Novel Haxogen-Free Flame Retardant Agent on the Properties of Wood-Plastic Composites
Preparation of Calcium Sulfate Whisker by Hydrothermal Method from Flue Gas Desulfurization (FGD) Gypsum
Discussion on Anchor Structures’ Deterioration Analysis Parameter Caused by Reinforcement Corrosion under Erosion Environment Condition
The Development and Application of Slug Test in Hydrogeology
Chapter 7: CAD/CAM/CAE
Finite Element Analysis and Optimization of S1110 Diesel Engine Body
Hydraulic System Simulation Analysis of Shearer's Cutting Part Based on AEMSim
An Assembly Process Model Involved Resource for Complex Products
Simulation and Optimization to Vehicle Interior Noise in Mid and High Frequency Using VAone
Mechanical System Simulation Analysis of Shearer Cutting Unit Based on Adams
McPherson Suspension Simulation Analysis Method Based on ADAMS
CNC Machining Simulation and Optimization Based on CATIA and VERICUT
Structural Parameters Optimization of Waveform Generator Based on LS-SVM and Simulated Annealing Algorithm
The Casting Process Optimization of the End Blade of ZLT1200 Axial Flow Pump
Research on the Model Reconstruction and Rapid Prototyping of Lumbar
Analysis of Acoustic Characteristics of a Car Cabin Using Computer-Aided Engineering
A New Design Method with CAD Software for Fruit Packaging Machinery
Overload Characteristics Analysis of Electromagnetic Release with Oil Dashpot Based on ADAMS
Numerical Simulation of Combustion Process in a 350t/d MSW Incinerator
Simulation Study of Space Spiral Gas-Liquid Separation Technology
UG-CAM Point Processing with NC Machining Simulation Software of Integrated Application
Dynamic Analyses of the Structure of the Horizontal Broaching Machine Based on Software of ANSYS
ANSYS Analysis of Heat Model for the Electromagnetic Drying Cylinder
Optimization Design of Towbarless Aircraft Tractor Frame Based on ANSYS Workbench
Development of Parrametric Modeling for the Spindle of NC Milling Machine Based on ANSYS
Chapter 8: New Energy and Heat Transfer
Energy Storage Control Based on Wind Farm
A Survey of Chaos in Photovoltaic Power System
The Synopsis of Stability in Wind Power Systems Based on Bifurcation Theory
Study the Thermal Impact of Massive Waste Material to Building Construction
Study on Cohesive Zones in COREX Melter Gasifier Using Hot Model
Study on the Importance of Wind Energy Development
A New Assessment Method for Energy Consumption of Thermal Power Unit
Study the Heat Sink Potential of Building Ground Floor Slab Integrated with ELT
Research on Simplified Reverse Method for Interfacial Heat Transfer Coefficient (IHTC)
Construction Technology and Economic Analysis of Ground-Source Heat Pump System
Modeling and Simulation of Induction Heating with Magnetic Flux Concentrator
The Stirring and Heating CFD Simulation Strategic Research on Food Waste Biological Treatment Processor
Design and Analysis of the Structure of the Fan Blade Maintenance Platform
Design of the Shape of Blade of the Semi-Submersible Ocean Current Power Generation Device Based on Fluent
Study on Low-Carbon Catalytic Combustion Furnace of Natural Gas
Method and Technique of Grade Recovery and Cascade Utilization (GRUC) Based on Sintering and Cooling Integration
Research on Collaborative Operation System of Wind Power and Electric Vehicle
Chapter 9: Applied Mechanics and Mechanical Engineering
Adaptive Vibration Control of Beraingless Permanent Magnet Synchronous Motor
Experimental Research of Heat Dissipation of Notebook
Based on Mechanical Clamping Device Lever Force Amplifier by Linear Motor
Reliability Design and Wear Extent Determination of a Cam Mechanism
New Construction Technology for Condenser Shell Module of Large Scale Nuclear Power Station
Kinematic and Dynamic Simulation of Automotive Manual Transmission
Study on a Modifying Method of Finite Element Model for Analyzing the Shaft Rotation System
Rigid-Flexible Coupling Dynamic Analysis of Excavator Drive Axle
Axial Force Test and Analysis in Riveting Assembly of Automotive Hub Bearing Unit
Study of the Dynamic Behavior of Face Gear Transmission System
Analysis of Temperature Field and Thermal Deformation for Lubricating Oil Transfer Pump
Method for Measuring Surface Mobility of a Finite Plate Subject to a Uniform Velocity Excitation
Analysis of Structure Dynamic Characteristics of a Metal Plate
Computational Analysis of Stress Field and Contact Pressure for Rubber Seal Based on Non-Linear Finite Element
Effects of Surface Tension on Drop Impact on a Horizontal Rotating Disk
Application of the New Interpolation Functions on Topology Optimization of Continuum Structure for Static and Mode Analysis
Hamiltonian Duality Equation on Three-Dimensional Problems of Magnetoelectroelastic Solids
On Spiral Spring in Elastic Deformation
Simulation and Evaluation of Wind-Induced Displacements of the Giant Airship in its Outbound Process
Influence by Casing Geometric Imperfection on Anti-Collapse Strength with Finite Element Calculation
Flow Characteristics of Viscoelastic Polymer Solution in Expansion Micro-Pores of Different Pore-Throat Ratio
The Analysis and Simulation of Granule Concentration Distribution in Cross Section of Spiral Slurry Pipeline
Effect of Exhaust Nozzle Diameter on Internal Flow Field Characteristics in Base Bleed Unit Simulator
Molecular Dynamics Simulation of Nanoscale Sliding Friction Process between Sphere and Plane
Direct Numerical Simulation on Transition of an Incompressible Boundary Layer on a Flat Plate
Stress Concentration Calculation of Silo Wall Opening Subjected to In-Plane Tension or Pressure
Experimental Investigation of the Edge Stress of Sphere-Cylinder Combined Shell
Phase Transition Determinated by Weighted Monte Carlo Simulations
A Simple Co-Rotational Finite Planar Beam Element of Geometrical and Material Nonlinearity
Error Analysis in Calculating the Internal Force of Plane Statically Determinate Truss by the Original Size Principle
Numerical Studies of Aerodynamic Performance of Gapped Flat Plates at High Angle of Attack
Vibration Analysis of an Axially Moving Viscoelastic Beam
Study of the New Exact Solutions of a (3+1)-Dimensional Nonlinear Evolution Equation
Variable Separation Solutions for the (2+1)-Dimensional General Ablowitz-Kaup-Newell-Segur Equation
Sectionalized Mechanical Models of Drilling Tool of Trenchless Directional Drilling
The Analysis of Pulse Pressure by Vascular Strain
Analysis of Stress-Strain Distribution for Wire Rope of Traction Hoister
Experiment Research on Influence of Mud Density to Wear Resistance of TP140 Casing
Productivity Prediction of Horizontal Well with Sulfur Deposition in Sour Gas Reservoir
Experimental Research on Degradation of Adhesively Bonded Box Beam under Cyclic Torsional Loads
Optimal Coupled Inversion for Jet Parameters in Flowing Ambient Fluid
Strength Analysis of Roller-Metallic Membrane Coupling
The Spatial Linkage Analysis and Synthesis of the Vector Fitting Method
Research on the Door Buckling Strength of Turbine Tower of HAWTs
The Dynamic Simulation of a Long Distance Natural Gas Pipeline
Spring’s Multi-Objective Optimal Design in Pre-Positioned Fixture of Shaft Pressing and Assembling Machine
Development of 4UMS-2700 Cassava Harvester
Vibration Experiment of Shearer Walking Unit
Hybrid Excavator Shafting Torsional Vibration Analysis
Influences of Main Parameters on Performance of Seed-Filling Device in Plot Seeder
Rocker Mechanism Study of Crank Angle between Extreme Positions
Research on Sag and Phase-Phase Space Change by Installing Interphase Spacers for Transmission Lines
Research on the Design Loads of a Surface Warship
Research on Combination Anti-Galloping Method between Interphase Spacer and Rotary Clamp Spacer for Transmission Lines
R&D of Equipment for Deicing by Thermal Water-Jet and Mechanical Deicing Method
Aerodynamic and Structural Design of Composite Wind Turbine Blades
MOSFET Modeling Based on Electromagnetic Interference (EMI)
Constraint Optimization of a Novel Flexure System with Two Rotation Freedom Degree
Chaos in a Circuit System with Ferroelectric Capacitor
Analysis & Study of Harmonics’ Impact on Analog Integrator’s Calibration
KED Modeling of PLS Mechanism
Experimental Study on Vibration of Pure Electric Bus
The Design of an Electromagnetic Damping Vibration Absorber
Design of Low Voltage Cell Fusion Instrument
Simulation of Power Transformer Windings Displacement Caused by Multiple Short-Circuit Forces
Auto-Bäcklund Transformations Derived via the Implicit C-D Pair
The Gear Modification of Wind Gearboxes High-Speed Gears on Romax Software
The Temporal Diffraction Characteristic of a Femtosecond Laser Pulse by a Serrated Aperture
Evaluating nMOSFET ESD Protection Designs: An Overview
Power MOSFET Devices and ESD Reliability Evaluations
Chapter 10: Mechatronics and Control Technology
Design on Stepping Type Heating Furnace Control System
Inverted Pendulum System Modeling and Fuzzy Neural Networks Control
Electric Characteristic of Steel-Making Electric Furnace and the Process Control
The Error Analysis and Compensation of Two-Dimensional Precision Positioning Platform
High-Low Voltage Drive of Asynchronous Motor Based on PLC Software Circular- Allotting
A Review of Static Synchronous Compensators (STATCOM)
Machine Vision-Aided Quality Decision System for Solder Joint Defect Evaluation
Chapter 10: Mechatronics and Control Technology
The Linkage Analysis of Electric Load Characteristic Statistical Indexes Based on VAR
Design and Simulation of the Temperature Control System of Agricultural Product Baking Equipment
Characteristics Identification of Straightness Error on Error Separation Technique
Research on the Forward Kinematics of Stewart Platform Using Memetic Algorithms
Research on Capture the Maximum Wind Energy Base on Fuzzy PID Controller
Research on a Dynamic Binary Stack Anti-Collision Algorithm
Design of Steeping Control System for Corn Wet Milling Process
Research on the Adaptive Cutting Method of Roadheader
The Fault Detection and Diagnosis System of Hydraulic Excavator Based on PXI Interface Technology
Control of the Mobile Robot Based on the Mobile-C Mobile Agent
Finite Element Analysis of Electromagnetic Device in Magnetorheological Fluid Brake
Second Development of Keller Based on Double-Arc Method
Considerations on Designing Artificial Muscle Working at High Pressure
Review on the Development of the Accessory Rotary Ultrasonic Machining Tools
Process Optimization of CNC End Milling of Integral Impeller Channels
Research of the Impact on Distance between Thermal Wires and Nozzle for Fluidic Gyroscope
PWM Design for Active Suspension without External Energy Supply Based on LQG Control
Multidisciplinary Collaborative Optimization of General Parameters of Low Orbit Spacecraft
Design of Intelligent Guide Vehicle for Blind People
Research on Vacuum Consumable Arc Remelting Furnace Drop Testing System for Thyristor Power Supply
Application of FMECA Method to Improve the Reliability of a CNC System
Unbalance Compensation Control in Active Magnetic Bearings Using Bias Current Excitation
Milling Process Optimization Based on Data from Industrial Shop Floor
Study on Control Characteristics of Driving and Lifting System for Logistics and Loading Machinery
The Application of System Parameters in Eliminating Oscillation and Improving Machining Accuracy of CNC Machine Tool
Rotor Vibration Control of Active Magnetic Bearing System Using Adaptive Forced Balancing Method
Cartesian Impedance Control for Space Robotic Arm Based on End Force/Torque Sensor
Modal Analysis and Design of a Vertically Movable Gate Field Effect Transistor (VMGFET) Proposed for Low-Frequency Sensing Applications
Study on the Degree of Strain Uniformity of a new FBG Accelerometer
Design of a MEMS Temperature Difference Suspended Structure Gas Flowmeter
Dioptric Fisheye Panoramic Camera Calibration Based on Unifying Spherical Projection Model
Influence of Sensitive Cavity Structure on the Resolution of Fluidic Gyroscope
Influence of Thermal Wires Position on Fluidic Gyroscope with Different Cavities
The Application of Modern Electronic Technology to Automotive Engine
USB Communication Interface Design Based on the PDIUSBD11
Design and Implementation of RAM Operation Conflict Arbiter IC in LED/LCD Display Control System
Design and Implementation of LED Display Screen Controller Based on STM32 and FPGA
Chapter 11: Measurement, Testing and Detection
Padé Approximation Method for FDTD Modeling of Wave Propagation in Dispersive Media
The Study on Detecting Failure in the Metal Beam Based on AE Parameters
Real-Time Monitoring of Acetaldehyde in Air by Cataluminescence-Based Gas Sensor
Design of Portable Instrument for the Concentration of Potassium Ions in Human Vitreous Humor to Estimate the Postmortem Interval
Fault Mode Identification of Engine Based on Audible Sound
Pulse System Based on Noise Detection System Research
Study on a Novel Testing System for Aerodynamic Performance of Magnus Wind Turbine Blade
Testing of Anchored Rock Bolt with Ultrasonic Guided Wave
The Piezoelectric and Piezomagnetic Effects on the Surface Wave Speed
The Study of Infrared Photocarrier Radiometry Based on Si Semiconductor
Composite Evaluation Using Contact and Non-Contact Ultrasound Excited Thermography
Key Technology in Thermal State Measurement Based on Structured Light Stereo Vision Technique
Measurement and Analysis of Knitting Fabric Pressure
tHcy Detected by High Performance Liquid Chromatography will be a Dangerous Factor for the Invasion of Occlusive Vascular Disease
Study of Flying Projectile’s Properties of Infrared Radiation
Chapter 12: Applications of Information Technology and Computer in Industry
The Design and Implementation of the Iron and Steel Industry Sales System Based on Business Intelligence
Research on XML Based Flexible Web Application Design
Analysis and Implementation of MPEG-4 Motion Codec
Data Aggregation Scheme for WSN with Privacy Protection
Simulation of Pattern on Computerized Embroidery Based on Image Processing
Adaptive Resource Allocation for the Multi-Carrier GIS Networks
Direction Based Project Developing for Building Web-Services
Research on Aircraft Communication and Satellite Link Handoff Simulation for Spatial Information Network
A Vague Words Retrieval Method in a Relational Database
The Research of CR-Based Underwater Wireless Network
Deterministic Bounds on Performance of Self-Similar Network Based on ETS
The Design and Realization of Real-Time Three-Dimensional Visualization System for Industrial Computed Tomography Based on GPU
The Implementation and Application of Information Management System of Commercial Vehicle Technical Performance Database Based on J2EE
Study on Optimization of Software Regressive Testing Based on RBF Neural Networks
Design and Implementation of EPON Network Management System Based on RIA
An Image Compression Algorithm Based on Multilevel B-Spline
A Granular Computing Based Decision Tree Algorithm and its Application in Intrusion Detection
Estimating Weights of Evaluation Factors on Basis of Monte Carlo Simulation
Sales Impacts of Location Based Advertising Using Wireless Communication Technology
Based on Texture Feature of Color Image Retrieval
Decision Tree Technology in Data Classification
Customer Demands Data Acquire Algorithm Research
Attacks to Li et al.’s Billing Service User Authentication Scheme
The Strategic Interaction on Endogenous Infinite Lattice and the Simulation
Steam Turbine Remote Maintenance Service Support Technology Based on RFID
An Artificial Immune Algorithm and its Application in AVO Inversion
Artificial Neural Network for 4D Reservoir Modeling System Design
The Study on Software Fault Tolerance
Raceway Definition Using Digital Image Processing Technology in Blast Furnace Model
Application of Data Mining in Continual Quality Improvement
Application of Wireless Location Technology in Advertising
The Accuracy Assessment of Weapon System Using Grey Linear Regression Method
A Novel Video Stream Transmission Control Algorithm
Mobile Agent Technology in Chinese High Tech Virtual Enterprise Research Summarization
Exploration of Parameter Factor in the RSSI Model
The Impact of Design Factors in Mobile Application Stores on Social Presence
Study of Zhongguancun Intersection Based on Computation Simulation and Analysis
Arid Environmental Characters Based on Eco-Information Transfer
E-Mail Classification Based Learning Algorithm Using Support Vector Machine
Automatic Automotive Panel Drawing Direction Algorithm Based on Genetic Algorithm
Design of RFID Reader Based on Protocol of ISO/IEC 14443 TYPE A
Entropy Based Attribute Reduction Algorithms for Rough Sets
Random Number Generation with Entropy Sources in the Graphics Processing Units
Research on Software Trusted Dynamic Measurement
Robust Software Watermarking for Protecting Three Dimension Applications Developed Using jMonkey Engine
Software Reliability Assessment Based on Fuzzy Evaluation
Study on Forest Growth Predicting by Using MODIS-NDVI Time Series
A Local Radial Point Interpolation Method for Two-Dimensional Schrödinger Equation
Mine Water Irruption Flooding Spread Route Generation Algorithm Based on Directed Graph
Information Service System of Manufacturing Industry: Current Situation, Problem and Future Trend
Analysis and Design of Monitoring System in Coal Mine Based on Internet of Things
EIT Image Processing Based on 2-D Empirical Mode Decomposition
An Adjustable Topology Control Algorithm for Three-Dimensional Wireless Sensor Networks
A Novel Vision Based Inspector with Light
Data Processing Method for High-Speed Signal Acquisition Mode
Design and Implementation of Campus 3D Virtual Walkthrough System - Take Hunan Science and Technology University as an Example
Chapter 13: Product Design Technology
Study on the Miniature Picking Device for Hickory Nuts
Research on the Extended Product Design Knowledge Classification System within a Distributed Knowledge Resources Environment
Supporting Research of Product Innovative Design Knowledge for Novices
Platform Configuration Method of the Wheel Loader Products Based on the Customers’ Demands
Home Leisure Seat Design Based on Leisure Behavior
Analyzing Usability of Cookers Interface Based on the User Mental Model
Study on Nature-Oriented Furniture Design
Development History, Status and Trends of Plot Seeder
Redesign of Liangzhu Pottery Based on Form Style Recognition
A Brazilian Ergonomic Human-Robot Interface Case
Wheelchair Comfort Evaluation Method Based on Neural Network
Evaluation of Liangzhu Cultural Artifacts Based on Perceptual Image
Chapter 14: Engineering Management and Engineering Education
The Strategy Research of the Technology Innovation and Consumption of the Experience under the Electronic-Economic Business Affairs - Enlightenment of the Development of Fuji and Kodak
Exploration and Practice of Engineering Mechanics Three-Dimensional Teaching Mode Based on the Training of Innovative Talent
The Research of the Training Model of Engineering Application Talents
The Construction and Innovation of Harmonious Culture for College Dormitory
Quality Information Management of Inventory Assets Based on Equipment Defect Archives
The Ideal of the Public Management Majors Setting up the National Affairs Management Course in Colleges and Universities
Neuro-Industrial Engineering: Research and Practice
A Study on Benign Construction of PETOE through Joint Training Model of University-Enterprise Cooperation
Elementary Analysis on Construction of Assessment Index System of Cleaner Production of Cheese Dyeing Enterprises
Tobacco Industry Collaborating Supply Chain Research and Strategy
Study of Influences on Interest Rate Changes between 2007 and 2011 to Real Estate Development Investment in Henan Province
Construction of Patent Infringement Litigation Early Warning Index System for the Pharmaceutical Enterprises
Survey on Technology of the Smart Grid
Research on Maintenance Force Location Model
Research on the External Characteristics & Binding Mechanism of the Environment Project
The Study of MTA Production Model and Production Processes
An Optimization Discusses of College Teaching Material Inventory Based on Supply Chain Management
Study of the Initial Well Production Line of Adjusted Wells in X Oilfield
Research on the Evaluation Index System of Technological Innovation Capability in Cement Industry
A Methodology for Evaluation of Distribution System Anti-Disaster Ability in Inclement Weather
The Contribution Analysis of Science and Technology Service Industry of Shenyang to Manufacturing Industry - Based on Clustering Analysis on Direct Consumption Coefficient
Countermeasure Research about Cost Control of Automatic Lathe Tool Changing System
Statistical Analysis of the Failure Modes and Causes of the Failure Blades of the Aviation Engine
