Liu / Yang / Shen | Materials, Mechanical Engineering and Manufacture | Sonstiges | 978-3-03795-371-6 | sack.de

Sonstiges, Englisch, Band Volumes 268-270, 2236 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g

Reihe: Applied Mechanics and Materials

Liu / Yang / Shen

Materials, Mechanical Engineering and Manufacture


Selected, peer reviewed papers from the Second International Conference on Applied Mechanics, Materials and Manufacturing (ICAMMM 2012), November 17-18, 2012, Changsha, China

Sonstiges, Englisch, Band Volumes 268-270, 2236 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g

Reihe: Applied Mechanics and Materials

ISBN: 978-3-03795-371-6
Verlag: Trans Tech Publications

These proceedings contain the accepted papers from the Second International Conference on Applied Mechanics, Materials and Manufacturing (ICAMMM 2012), held in Changsha, China, November 17-18, 2012. The papers are grouped as follows: Chapter 1: Composites and Polymers; Chapter 2: Micro/Nano Materials; Chapter 3: Environmental-Friendly Materials and Biological Materials; Chapter 4: Iron, Steel and Alloys; Chapter 5: Materials Processing and Chemical Technologies; Chapter 6: Buildings and Constructions. Materials and Technologies; Chapter 7: CAD/CAM/CAE; Chapter 8: New Energy and Heat Transfer; Chapter 9: Applied Mechanics and Mechanical Engineering; Chapter 10: Mechatronics and Control Technology; Chapter 11: Measurement, Testing and Detection; Chapter 12: Applications of Information Technology and Computer in Industry; Chapter 13: Product Design Technology; Chapter 14: Engineering Management and Engineering Education.
Liu / Yang / Shen Materials, Mechanical Engineering and Manufacture jetzt bestellen!

Autoren/Hrsg.

Liu, Hua Wu
Yang, Yong Xin
Shen, Shi Jie
Zhong, Zhi Li
Zheng, Lai Jiu
Feng, Peng

Fachgebiete

Weitere Infos & Material

Finite Element Simulating of C/SiC Composite BoltThe Preparation of CaZrO3 Coating Ultra-Fine Nickel Powders via Chemical DepositionTheoretical Study of Energy-Level Splitting of Cs2NaPrCl6 CrystalPreparation and Characterization of Fe3+-Doped TiO2/Diatomite CompositeResearch on VARTM Technology for Fabricating Basalt Fiber/Vinyl Ester CompositesDesign, Synthesis and Photophysical Properties of Novel Tetrahedral Carbazole-Bridged Silanes with Benzimidazole GroupsLoad-Carrying Capacity of Cantilevers of Anti-Flood Barriers Made of FRP Composite Structural ProfilesTribological Behavior of Si3N4-hBN Ceramic Materials Sliding against Fe-B Alloy without LubricationIsothermal Crystallization Behavior of Poly (L-lactic Acid)/ Surface-Grafted Silica NanocompositesSynthesis of High Solid Content Acrylic-Polyurethane Hybrid Emulsions with Low ViscosityElectrochemical Polymerization and Electrochromic Properties of Poly(3-methoxythiophene)/NiO Composite FilmsPreparation of Fly Ash Hollow Glass Bead/Titanium Dioxide Composites by Chemical PrecipitationPreparation of Aluminum Composite Ceramic Membrane by Inorganic Precursor Sol-Gel MethodTribological Characteristics of Different Components on C/C-SiC Composites Fabricated by Warm Compacted In Situ ReactionMagnetoelectric Effect of the Ba0.80Sr0.2TiO3-CoFe2O4 Ceramic Composites by Molten-Salt Synthesis MethodAn Experimental Investigation of the Dynamic Mechanical Behaviors of Hollow Spheres Filled Syntactic FoamExperimental Research on Failure of Filament Wound Composite Pipe under Axial TensionInfluence of Si3N4 Addition on the Mechanical Properties and Microstructure of Unfired A12O3-C Slide PlatePerformance and Microstructure of TiN/Cu EDM ElectrodesEffect of Fiber Volume Fraction on Low Cycle Fatigue Behavior of Al2O3f/Al-Si CompositesThe Rotational Extrusion Alloying Al-Ti CompositePreparation and Humidity Control Performances of a Novel Composite Humidity Control PaperFatigue Residual Properties of Ti/APC-2 Nanocomposite Laminates after Low-Velocity ImpactThe Effects of Carbon Black Loading on the Characteristics of Carbon Composite Bipolar Plate by Utilizing Graphite Waste ProductsEffect of Deposited Angle on Structure and Surface Morphology of Fluorocarbon Films Deposited by Pulsed Plasma ThrusterRheological Properties of RLDPE/LLDPE BlendsStudy on the Damping Properties of Multi-Layered Gradient Materials Based on Organic HybridsStudy on the Rheological Behavior of Neat PLA Chips and PLA Composites for Meltblowing NonwovensEffect of Polymeric Coupling Agent on Mechanical Properties of Kenaf Fiber / Polystyrene CompositesStudy of the Impact Toughness Experiment of SiCp/Al FGM and Numerical SimulationKinetics of Non-Isothermal Degradation of PFASurface Structure and Protein Resistance of PMMA/PS Copolymer CoatingsExperiment and Modeling Study on the Compaction Behavior of Bindered Textile PreformsAg Doped Co3O4 Nanowire Arrays as an Electrode Material for Electrochemical CapacitorsThe Fabrication of MnO2 Nanoparticle for Supercapacitor ApplicationStudy of Tension Process of Single Crystal Titanium Nano-Rod Based on the Molecular DynamicsPreparation and Characterization of TiO2 Nanoparticles / CNTs Composite ParticlesHydrothermal Synthesis of Tungsten Oxide NanoparticlesSynthesis and Characterization of Nano Cerium Oxide by Surfactant-Assisted Precipitation MethodPreparation of Nano-Scale Piece of Sericite by Using Mechanical Exfoliation Method and Ultrasonic MethodFacile Synthesis and Electrochemical Characterization of PbO@C NanocompositesPreparation and Characterization on PU/CS Nanofiber MembraneResearch on Electrospinning Process of Pullulan NanofibersEnvelope Method Applied on the AZO Thin FilmsCdSe/ZnO Core/Shell Semiconductor Nanocrystals: Synthesis and CharacterizationEffects of Braiding Parameters on Radial Compressive Property of Intraluminal StentsTreatment of Chroma from Tannery Effluent by FlocculantThe Role of Copper in the Growth of Methylosinus trichosporium IMV 3011 and Poly-?-Hydroxybutyrate BiosynthesisSynthesis of PAN Fiber Supported Fe(bpy)32+ for RhB Degradation under Visible Light IrradiationPreparation and Adsorption Performance of Cu (II)-Imprinted ALG-CTS Complex MicrospheresEffects of Enzymes Treatment on Structure and Properties of Acellular Dermal MatrixExperimental Investigation of Microbial Paraffin Removal TechnologyStudies on the Property Changes of Environmental Degradation Mulching Film and Polyethylene Mulching Film in Water EnvironmentRamie Fiber Modification Trials under Different ConditionsCell Proliferation on the Hydroxyapatite Ceramics Derived from Animal BonesThe Thermal Hysteresis Temperature of ?HPLC-6?: Langmuir ModelThe Effect of Alkali Treatment to the Properties of Banana FibersSynthesis and Characterization of Spherical Aggregations of Organic-ZnS HybridsImprovement of Wear Resistances of AISI 316L Austenitic Stainless Steels by Anodic NitridingStudy of the Damage of Drills in Dry Drilling of NM360 SteelsAn Experimental Study on the Shear Strength of Steel Structures JointsDissimilar Welding between AISI 304 Stainless Steel and AISI 1020 Carbon Steel PlatesMicrostructure Evolution and Property of Austenitic Stainless Steel after ECAP3-D Simulation of H-Beam Multi-Pass Hot Rolling and Microstructure EvolutionMulticomponent Y-M-Al-Co(M=Ce, Nd or Pr) Amorphous Alloys Developed by Equiatomic SubstitutionThe Constitutive Relation of Total Strain Theory Based on the Simple Experimental Data by the Application of Titanium AlloyEffect of Isothermal Ageing on Damping Capacity of Cu-20.4Al-8.7MnMicrostructures and Damping Capacities of AZ91D-0.7%Si AlloyMulti-Fractional Research on Pore Distribution in the Sinter Ore with Different BasicityStudy on the Corrosion Resistance of High Boron Iron-Based AlloyStudy on Corrosion Behavior of Hot Extruded Mg-1Ca-0.5Mn Alloy in Sodium Chloride Water SolutionModel Analysis on Particles Size Distribution of Beryllium PowderEffect of Sintering Temperature on Microstructure and Mechanical Properties of WC-16TiC-xTaC-9Co Cemented CarbidesMulti-Fractal Behaviors in Grain Size Distribution of Low Silica SinterComparison Analysis of Aircraft Aluminum Alloy Corrosion Damage Forecasting MethodAnisotropy Affecting Dendrite Growth of Fe-C Alloy in a Forced FlowComprehensive Mathematical Model of Full Oxygen Blast Furnace with Top Recycle Gas Heated by GasifierMicrostructure and High Temperature Mechanical Properties of Mg-1Si-1Y AlloyNumerical Simulation of Equal Channel Angular Pressing for Multi-Pass in Different RoutesEffects of Electromagnetic Field and Lubricate Condition on the Surface Quality of Aluminum Alloy Billet during LFEC ProcessingA New Method of Processing High-Precision Micro-Hole with the Femtosecond LaserMulti-Field Coupled Analysis on Preparation Process of CZ CrystalThe Research and Optimization of a 6061 Aluminum Rectangular Tube Extrusion Using Porthole Dies According to the Parameter of Split RatioCharacterization of Stress Concentration Degree Based on 2-Dementional Magnetic Memory SignalsProcess Optimization Based on Artificial Neural Network of Plant Oli to Preparing BiodieselInfluence of Different Damp-Heat Setting Techniques on Crimp-Hair Setting EffectPreparation and Apply of Adjustable Angle Machine for Friction Material on Mixing and GranulationMicrostructure Evolution of Al/Fe Liquid/Solid InterfaceModeling and Experiment of the Cutting Force for Aluminium Alloy Work-PieceFunctional Finishing of Cotton and Polyester/Cotton Fabrics with a Fluorine-Containing Water and Oil RepellentA Method for Determination of Friction Coefficient in Sheet Metal Forming of Magnesium AlloyStudy of Using Internal Thread Whirling in Machining Titanium Dental ImplantEffect of Specific Ions in Preparing Water on Viscosity of Polyacrylamide SolutionProcess Optimization of Synchronizer Ring Gear ExtrusionPhysical Simulation on Forging Method with Horizontal V-Shaped AnvilStudy on the Forming Process Parameters of Sleeper Fixed Reinforcing Plate Using Orthogonal Experiment Method by Numerical Simulation TechnologyExperimental Research of Al2O3 Micro-Particles Production by Supercritical HydrolysisStress-Etching Using Laser Electrochemical Micromachining with MasksPrediction of a New Form of the Cutting Tool According to Achieve the Desired Surface QualityNumerical Simulations of Combustion and Decomposition Processes in Precalciner with Two Different Heights of Raw Meal InletsInfluence of Melt Temperature on Structure of Polyacrylonitrile in Ionic Liquids during Plasticized Melt Spinning ProcessA Study of Femtosecond Laser Machining Technology Applied in Air-Film Holes on Turbine BladesFEM Simulation on Extrusion of Magnesium AlloysFinite Element Analysis of High Speed Cutting ToolMicrowave-Assisted Synthesis of 2-(2-Nitroethenly)thiophene from 2-Thiophenecarboxaldehyde and NitromethaneResearch on Machining Accuracy in Milling Ti6Al4V Thin-Walled Component with Paraffin ReinforcementSurface Modification of the Polyethersulfone Membrane by Low Pressure Argon Plasma TreatmentThe Analysis of the Influence of Perforating Parameters on the Strength Security of Perforation StringThe Casting Process Optimization of the Impellor of 65KZL Slurry PumpElectrical and Optical Characterization of Cold Atmospheric Pressure Plasma Jet and the Effects of N2 Gas on Argon Plasma DischargeInfluence of Initial Temperature of Chilling Treatment on Residual Stress State of TIG Dressing Zone for T-Joint Welded ToeIgnition Temperature and Stable Combustion Temperature of the In Situ Combustion ProcessCopper-Based Mixed Oxides Catalyst of Water-Gas Shift Reaction for Fuel Cells: The Role of Alkali ChargeAnalysis of HDPE Crystallization for Axial Symmetric CastIndoor Study of Viscosity Reducer for Thickened Oil of HuancaiFluorescence Spectrum of CdTe Quantum Dots Solution in Ostwald Ripening Process at Room TemperaturePreparation and Characterization of High-Substituted Cationic Starches in Aqueous SolutionsEnhancement of Explosion Energy and Mechanical Strength of Energetic Material by Aluminum FibreWear Analysis of Silicon Nitride (Si3N4) Cutting Tool in Dry Machining of T6061 Aluminium AlloyPatent Analysis on Graphene Materials in Lithium-Ion BatteriesStudy on Modification of UFRA by Enzyme Hydrolysis Prepared Oxidized StarchPreparation of PCL/PVP/Ag Nanofiber Membranes by Electrospinning MethodResearch and Development of the Low Twist YarnInfluence of the Catalyst on the Synthesis of SIPEPreparation and Application of Carboxymethyl StarchEffect of Physical Factors on Viscosity of Polyacrylamide Solution Prepared by Oilfield Produced WaterApplication of Twin Screw Extruder in Cellulose Dissolution with Ionic LiquidFlow Characteristics of DC Plasma Torch Controlled by Magnetic FieldThe Test of Amine Polymeric Alcohol Drilling Fluid System in Baka BlockInterpretation of the Early Hydration Procedure of Standard Cement Materials by Electrodeless Resistivity MethodApplication of Magnesia-Phosphate Cement for Chromia/Alumina CastablesCyclic Triaxial Tests of Saturated Clay and Stability Numerical Analysis of Inland Waterway Slope under Effect of Ship WaveGeological Significance of Rare Earth Elements in Chinese Mount Huaying and their ApplicationsAn Empirical Correlation between Unconfined Compression Strength and Curing Time for Cement-SoilSeismic Vulnerability of Existing RC Buildings and Influence of the Decoupling of the Effective Masonry Panels from the Structural FramesStudy on the Technique of Filling Paste into Mine Goaf with Building WasteAnalysis of Waterproof Bonding Layer in Permeable Asphalt PavementContinuous Belt Mucking Technology of China Railway Tunnel ConstructionInfluence of Deep Foundation Pit Construction to the Surrounding Buildings - Take a Foundation Pit in Haikou as ExampleInfluential Factors and Structural ReliabilityThe Effect on the Dynamic Tests of Prestressed Concrete Simply-Supported Beams Caused by Bearing ConstraintsFEM Analysis on a New Type of Anti-Tension DeviceTest and FEM Analysis on a New Type of Anti-Wind DeviceResponse and Parameter Analysis of Reinforced Retaining Wall under Earthquake LoadingShear Wall Construction in Buildings: A Conceptual Framework on the Aspect of Analysis and DesignConstitutive Behavior of Salt Rock Coupled of Creep Deformation and Damage DevelopmentThe Numerical Simulation and Optimization of the Pre-Splitting Crack?s Length in Underground Deep Hole BlastingAnalytic and Numerical Solutions of Load and Stress of Casing and Cement in Cementing SectionA Double Inequality Method for Calculate the Loading Capacity of a Sheet Pile DIMSPElastic Seismic Response of Steel-Concrete Composite Frames with Partial InteractionAn Analysis of the Collapse Strength of Down-Hole Tubings Loaded by Axial Compressive Forces and Bending MomentAnalysis of Premium Connection of Connecting and Sealing Ability Loaded by Axial Tensile LoadsModeling the Mechanical Behaviour of a Subsea Guide Base Subject to Installation and Operations LoadsExperimental Study on PC Beams Dynamic Performance with the Itial Effective PrestressComparative Study on Ultimate Pullout Resistance Test and Theoretical Derivation of Flexible Pressurized Anchor with Numerical Simulation ResultThe Coupled Effects of Thickness and Distance between Holes on Stress and Strain Concentrations of Uniaxially Loaded Tensile PlatesThe Interaction of Holes on Stress and Strain Concentrations in Uniaxially Loaded Tensile PlatesFractured Reservoir Blocking Dosage Calculation MethodExperimental Study on Capability of EPS Beads-Mixed Lightweight SoilHybrid Effects on Strength of Steel-Polypropylene Hybrid Fiber Reinforced Concrete under Uniaxial and Triaxial CompressionEffect of Dynamic Compaction on Red Sand Soil Filling EmbankmentThe Influence Factors of the Workability of Roller Compacted ConcreteStudy on Cumulative Damage of Tunnel Shotcrete under BlastingStudy the Axial Force-Time History of Reinforced Retaining Wall under Earthquake LoadingEffect of Admixtures Rich in Aluminium on Expansion due to Alkali-Silica ReactionApplication Performance of Aminosulphonic Acid-Based SuperplasticizerEffects of Adding Method of a Novel Haxogen-Free Flame Retardant Agent on the Properties of Wood-Plastic CompositesPreparation of Calcium Sulfate Whisker by Hydrothermal Method from Flue Gas Desulfurization (FGD) GypsumDiscussion on Anchor Structures? Deterioration Analysis Parameter Caused by Reinforcement Corrosion under Erosion Environment ConditionThe Development and Application of Slug Test in HydrogeologyFinite Element Analysis and Optimization of S1110 Diesel Engine BodyHydraulic System Simulation Analysis of Shearer's Cutting Part Based on AEMSimAn Assembly Process Model Involved Resource for Complex ProductsSimulation and Optimization to Vehicle Interior Noise in Mid and High Frequency Using VAoneMechanical System Simulation Analysis of Shearer Cutting Unit Based on AdamsMcPherson Suspension Simulation Analysis Method Based on ADAMSCNC Machining Simulation and Optimization Based on CATIA and VERICUTStructural Parameters Optimization of Waveform Generator Based on LS-SVM and Simulated Annealing AlgorithmThe Casting Process Optimization of the End Blade of ZLT1200 Axial Flow PumpResearch on the Model Reconstruction and Rapid Prototyping of LumbarAnalysis of Acoustic Characteristics of a Car Cabin Using Computer-Aided EngineeringA New Design Method with CAD Software for Fruit Packaging MachineryOverload Characteristics Analysis of Electromagnetic Release with Oil Dashpot Based on ADAMSNumerical Simulation of Combustion Process in a 350t/d MSW IncineratorSimulation Study of Space Spiral Gas-Liquid Separation TechnologyUG-CAM Point Processing with NC Machining Simulation Software of Integrated ApplicationDynamic Analyses of the Structure of the Horizontal Broaching Machine Based on Software of ANSYSANSYS Analysis of Heat Model for the Electromagnetic Drying CylinderOptimization Design of Towbarless Aircraft Tractor Frame Based on ANSYS WorkbenchDevelopment of Parrametric Modeling for the Spindle of NC Milling Machine Based on ANSYSEnergy Storage Control Based on Wind FarmA Survey of Chaos in Photovoltaic Power SystemThe Synopsis of Stability in Wind Power Systems Based on Bifurcation TheoryStudy the Thermal Impact of Massive Waste Material to Building ConstructionStudy on Cohesive Zones in COREX Melter Gasifier Using Hot ModelStudy on the Importance of Wind Energy DevelopmentA New Assessment Method for Energy Consumption of Thermal Power UnitStudy the Heat Sink Potential of Building Ground Floor Slab Integrated with ELTResearch on Simplified Reverse Method for Interfacial Heat Transfer Coefficient (IHTC)Construction Technology and Economic Analysis of Ground-Source Heat Pump SystemModeling and Simulation of Induction Heating with Magnetic Flux ConcentratorThe Stirring and Heating CFD Simulation Strategic Research on Food Waste Biological Treatment ProcessorDesign and Analysis of the Structure of the Fan Blade Maintenance PlatformDesign of the Shape of Blade of the Semi-Submersible Ocean Current Power Generation Device Based on FluentStudy on Low-Carbon Catalytic Combustion Furnace of Natural GasMethod and Technique of Grade Recovery and Cascade Utilization (GRUC) Based on Sintering and Cooling IntegrationResearch on Collaborative Operation System of Wind Power and Electric VehicleAdaptive Vibration Control of Beraingless Permanent Magnet Synchronous MotorExperimental Research of Heat Dissipation of NotebookBased on Mechanical Clamping Device Lever Force Amplifier by Linear MotorReliability Design and Wear Extent Determination of a Cam MechanismNew Construction Technology for Condenser Shell Module of Large Scale Nuclear Power StationKinematic and Dynamic Simulation of Automotive Manual TransmissionStudy on a Modifying Method of Finite Element Model for Analyzing the Shaft Rotation SystemRigid-Flexible Coupling Dynamic Analysis of Excavator Drive AxleAxial Force Test and Analysis in Riveting Assembly of Automotive Hub Bearing UnitStudy of the Dynamic Behavior of Face Gear Transmission SystemAnalysis of Temperature Field and Thermal Deformation for Lubricating Oil Transfer PumpMethod for Measuring Surface Mobility of a Finite Plate Subject to a Uniform Velocity ExcitationAnalysis of Structure Dynamic Characteristics of a Metal PlateComputational Analysis of Stress Field and Contact Pressure for Rubber Seal Based on Non-Linear Finite ElementEffects of Surface Tension on Drop Impact on a Horizontal Rotating DiskApplication of the New Interpolation Functions on Topology Optimization of Continuum Structure for Static and Mode AnalysisHamiltonian Duality Equation on Three-Dimensional Problems of Magnetoelectroelastic SolidsOn Spiral Spring in Elastic DeformationSimulation and Evaluation of Wind-Induced Displacements of the Giant Airship in its Outbound ProcessInfluence by Casing Geometric Imperfection on Anti-Collapse Strength with Finite Element CalculationFlow Characteristics of Viscoelastic Polymer Solution in Expansion Micro-Pores of Different Pore-Throat RatioThe Analysis and Simulation of Granule Concentration Distribution in Cross Section of Spiral Slurry PipelineEffect of Exhaust Nozzle Diameter on Internal Flow Field Characteristics in Base Bleed Unit SimulatorMolecular Dynamics Simulation of Nanoscale Sliding Friction Process between Sphere and PlaneDirect Numerical Simulation on Transition of an Incompressible Boundary Layer on a Flat PlateStress Concentration Calculation of Silo Wall Opening Subjected to In-Plane Tension or PressureExperimental Investigation of the Edge Stress of Sphere-Cylinder Combined ShellPhase Transition Determinated by Weighted Monte Carlo SimulationsA Simple Co-Rotational Finite Planar Beam Element of Geometrical and Material NonlinearityError Analysis in Calculating the Internal Force of Plane Statically Determinate Truss by the Original Size PrincipleNumerical Studies of Aerodynamic Performance of Gapped Flat Plates at High Angle of AttackVibration Analysis of an Axially Moving Viscoelastic BeamStudy of the New Exact Solutions of a (3+1)-Dimensional Nonlinear Evolution EquationVariable Separation Solutions for the (2+1)-Dimensional General Ablowitz-Kaup-Newell-Segur EquationSectionalized Mechanical Models of Drilling Tool of Trenchless Directional DrillingThe Analysis of Pulse Pressure by Vascular StrainAnalysis of Stress-Strain Distribution for Wire Rope of Traction HoisterExperiment Research on Influence of Mud Density to Wear Resistance of TP140 CasingProductivity Prediction of Horizontal Well with Sulfur Deposition in Sour Gas ReservoirExperimental Research on Degradation of Adhesively Bonded Box Beam under Cyclic Torsional LoadsOptimal Coupled Inversion for Jet Parameters in Flowing Ambient FluidStrength Analysis of Roller-Metallic Membrane CouplingThe Spatial Linkage Analysis and Synthesis of the Vector Fitting MethodResearch on the Door Buckling Strength of Turbine Tower of HAWTsThe Dynamic Simulation of a Long Distance Natural Gas PipelineSpring?s Multi-Objective Optimal Design in Pre-Positioned Fixture of Shaft Pressing and Assembling MachineDevelopment of 4UMS-2700 Cassava HarvesterVibration Experiment of Shearer Walking UnitHybrid Excavator Shafting Torsional Vibration AnalysisInfluences of Main Parameters on Performance of Seed-Filling Device in Plot SeederRocker Mechanism Study of Crank Angle between Extreme PositionsResearch on Sag and Phase-Phase Space Change by Installing Interphase Spacers for Transmission LinesResearch on the Design Loads of a Surface WarshipResearch on Combination Anti-Galloping Method between Interphase Spacer and Rotary Clamp Spacer for Transmission LinesR&D of Equipment for Deicing by Thermal Water-Jet and Mechanical Deicing MethodAerodynamic and Structural Design of Composite Wind Turbine BladesMOSFET Modeling Based on Electromagnetic Interference (EMI)Constraint Optimization of a Novel Flexure System with Two Rotation Freedom DegreeChaos in a Circuit System with Ferroelectric CapacitorAnalysis & Study of Harmonics? Impact on Analog Integrator?s CalibrationKED Modeling of PLS MechanismExperimental Study on Vibration of Pure Electric BusThe Design of an Electromagnetic Damping Vibration AbsorberDesign of Low Voltage Cell Fusion InstrumentSimulation of Power Transformer Windings Displacement Caused by Multiple Short-Circuit ForcesAuto-B?cklund Transformations Derived via the Implicit C-D PairThe Gear Modification of Wind Gearboxes High-Speed Gears on Romax SoftwareThe Temporal Diffraction Characteristic of a Femtosecond Laser Pulse by a Serrated ApertureEvaluating nMOSFET ESD Protection Designs: An OverviewPower MOSFET Devices and ESD Reliability EvaluationsDesign on Stepping Type Heating Furnace Control SystemInverted Pendulum System Modeling and Fuzzy Neural Networks ControlElectric Characteristic of Steel-Making Electric Furnace and the Process ControlThe Error Analysis and Compensation of Two-Dimensional Precision Positioning PlatformHigh-Low Voltage Drive of Asynchronous Motor Based on PLC Software Circular- AllottingA Review of Static Synchronous Compensators (STATCOM)Machine Vision-Aided Quality Decision System for Solder Joint Defect EvaluationThe Linkage Analysis of Electric Load Characteristic Statistical Indexes Based on VARDesign and Simulation of the Temperature Control System of Agricultural Product Baking EquipmentCharacteristics Identification of Straightness Error on Error Separation TechniqueResearch on the Forward Kinematics of Stewart Platform Using Memetic AlgorithmsResearch on Capture the Maximum Wind Energy Base on Fuzzy PID ControllerResearch on a Dynamic Binary Stack Anti-Collision AlgorithmDesign of Steeping Control System for Corn Wet Milling ProcessResearch on the Adaptive Cutting Method of RoadheaderThe Fault Detection and Diagnosis System of Hydraulic Excavator Based on PXI Interface TechnologyControl of the Mobile Robot Based on the Mobile-C Mobile AgentFinite Element Analysis of Electromagnetic Device in Magnetorheological Fluid BrakeSecond Development of Keller Based on Double-Arc MethodConsiderations on Designing Artificial Muscle Working at High PressureReview on the Development of the Accessory Rotary Ultrasonic Machining ToolsProcess Optimization of CNC End Milling of Integral Impeller ChannelsResearch of the Impact on Distance between Thermal Wires and Nozzle for Fluidic GyroscopePWM Design for Active Suspension without External Energy Supply Based on LQG ControlMultidisciplinary Collaborative Optimization of General Parameters of Low Orbit SpacecraftDesign of Intelligent Guide Vehicle for Blind PeopleResearch on Vacuum Consumable Arc Remelting Furnace Drop Testing System for Thyristor Power SupplyApplication of FMECA Method to Improve the Reliability of a CNC SystemUnbalance Compensation Control in Active Magnetic Bearings Using Bias Current ExcitationMilling Process Optimization Based on Data from Industrial Shop FloorStudy on Control Characteristics of Driving and Lifting System for Logistics and Loading MachineryThe Application of System Parameters in Eliminating Oscillation and Improving Machining Accuracy of CNC Machine ToolRotor Vibration Control of Active Magnetic Bearing System Using Adaptive Forced Balancing MethodCartesian Impedance Control for Space Robotic Arm Based on End Force/Torque SensorModal Analysis and Design of a Vertically Movable Gate Field Effect Transistor (VMGFET) Proposed for Low-Frequency Sensing ApplicationsStudy on the Degree of Strain Uniformity of a new FBG AccelerometerDesign of a MEMS Temperature Difference Suspended Structure Gas FlowmeterDioptric Fisheye Panoramic Camera Calibration Based on Unifying Spherical Projection ModelInfluence of Sensitive Cavity Structure on the Resolution of Fluidic GyroscopeInfluence of Thermal Wires Position on Fluidic Gyroscope with Different CavitiesThe Application of Modern Electronic Technology to Automotive EngineUSB Communication Interface Design Based on the PDIUSBD11Design and Implementation of RAM Operation Conflict Arbiter IC in LED/LCD Display Control SystemDesign and Implementation of LED Display Screen Controller Based on STM32 and FPGAPad? Approximation Method for FDTD Modeling of Wave Propagation in Dispersive MediaThe Study on Detecting Failure in the Metal Beam Based on AE ParametersReal-Time Monitoring of Acetaldehyde in Air by Cataluminescence-Based Gas SensorDesign of Portable Instrument for the Concentration of Potassium Ions in Human Vitreous Humor to Estimate the Postmortem IntervalFault Mode Identification of Engine Based on Audible SoundPulse System Based on Noise Detection System ResearchStudy on a Novel Testing System for Aerodynamic Performance of Magnus Wind Turbine BladeTesting of Anchored Rock Bolt with Ultrasonic Guided WaveThe Piezoelectric and Piezomagnetic Effects on the Surface Wave SpeedThe Study of Infrared Photocarrier Radiometry Based on Si SemiconductorComposite Evaluation Using Contact and Non-Contact Ultrasound Excited ThermographyKey Technology in Thermal State Measurement Based on Structured Light Stereo Vision TechniqueMeasurement and Analysis of Knitting Fabric PressuretHcy Detected by High Performance Liquid Chromatography will be a Dangerous Factor for the Invasion of Occlusive Vascular DiseaseStudy of Flying Projectile?s Properties of Infrared RadiationThe Design and Implementation of the Iron and Steel Industry Sales System Based on Business IntelligenceResearch on XML Based Flexible Web Application DesignAnalysis and Implementation of MPEG-4 Motion CodecData Aggregation Scheme for WSN with Privacy ProtectionSimulation of Pattern on Computerized Embroidery Based on Image ProcessingAdaptive Resource Allocation for the Multi-Carrier GIS NetworksDirection Based Project Developing for Building Web-ServicesResearch on Aircraft Communication and Satellite Link Handoff Simulation for Spatial Information NetworkA Vague Words Retrieval Method in a Relational DatabaseThe Research of CR-Based Underwater Wireless NetworkDeterministic Bounds on Performance of Self-Similar Network Based on ETSThe Design and Realization of Real-Time Three-Dimensional Visualization System for Industrial Computed Tomography Based on GPUThe Implementation and Application of Information Management System of Commercial Vehicle Technical Performance Database Based on J2EEStudy on Optimization of Software Regressive Testing Based on RBF Neural NetworksDesign and Implementation of EPON Network Management System Based on RIAAn Image Compression Algorithm Based on Multilevel B-SplineA Granular Computing Based Decision Tree Algorithm and its Application in Intrusion DetectionEstimating Weights of Evaluation Factors on Basis of Monte Carlo SimulationSales Impacts of Location Based Advertising Using Wireless Communication TechnologyBased on Texture Feature of Color Image RetrievalDecision Tree Technology in Data ClassificationCustomer Demands Data Acquire Algorithm ResearchAttacks to Li et al.?s Billing Service User Authentication SchemeThe Strategic Interaction on Endogenous Infinite Lattice and the SimulationSteam Turbine Remote Maintenance Service Support Technology Based on RFIDAn Artificial Immune Algorithm and its Application in AVO InversionArtificial Neural Network for 4D Reservoir Modeling System DesignThe Study on Software Fault ToleranceRaceway Definition Using Digital Image Processing Technology in Blast Furnace ModelApplication of Data Mining in Continual Quality ImprovementApplication of Wireless Location Technology in AdvertisingThe Accuracy Assessment of Weapon System Using Grey Linear Regression MethodA Novel Video Stream Transmission Control AlgorithmMobile Agent Technology in Chinese High Tech Virtual Enterprise Research SummarizationExploration of Parameter Factor in the RSSI ModelThe Impact of Design Factors in Mobile Application Stores on Social PresenceStudy of Zhongguancun Intersection Based on Computation Simulation and AnalysisArid Environmental Characters Based on Eco-Information TransferE-Mail Classification Based Learning Algorithm Using Support Vector MachineAutomatic Automotive Panel Drawing Direction Algorithm Based on Genetic AlgorithmDesign of RFID Reader Based on Protocol of ISO/IEC 14443 TYPE AEntropy Based Attribute Reduction Algorithms for Rough SetsRandom Number Generation with Entropy Sources in the Graphics Processing UnitsResearch on Software Trusted Dynamic MeasurementRobust Software Watermarking for Protecting Three Dimension Applications Developed Using jMonkey EngineSoftware Reliability Assessment Based on Fuzzy EvaluationStudy on Forest Growth Predicting by Using MODIS-NDVI Time SeriesA Local Radial Point Interpolation Method for Two-Dimensional Schr?dinger EquationMine Water Irruption Flooding Spread Route Generation Algorithm Based on Directed GraphInformation Service System of Manufacturing Industry: Current Situation, Problem and Future TrendAnalysis and Design of Monitoring System in Coal Mine Based on Internet of ThingsEIT Image Processing Based on 2-D Empirical Mode DecompositionAn Adjustable Topology Control Algorithm for Three-Dimensional Wireless Sensor NetworksA Novel Vision Based Inspector with LightData Processing Method for High-Speed Signal Acquisition ModeDesign and Implementation of Campus 3D Virtual Walkthrough System - Take Hunan Science and Technology University as an ExampleStudy on the Miniature Picking Device for Hickory NutsResearch on the Extended Product Design Knowledge Classification System within a Distributed Knowledge Resources EnvironmentSupporting Research of Product Innovative Design Knowledge for NovicesPlatform Configuration Method of the Wheel Loader Products Based on the Customers? DemandsHome Leisure Seat Design Based on Leisure BehaviorAnalyzing Usability of Cookers Interface Based on the User Mental ModelStudy on Nature-Oriented Furniture DesignDevelopment History, Status and Trends of Plot SeederRedesign of Liangzhu Pottery Based on Form Style RecognitionA Brazilian Ergonomic Human-Robot Interface CaseWheelchair Comfort Evaluation Method Based on Neural NetworkEvaluation of Liangzhu Cultural Artifacts Based on Perceptual ImageThe Strategy Research of the Technology Innovation and Consumption of the Experience under the Electronic-Economic Business Affairs - Enlightenment of the Development of Fuji and KodakExploration and Practice of Engineering Mechanics Three-Dimensional Teaching Mode Based on the Training of Innovative TalentThe Research of the Training Model of Engineering Application TalentsThe Construction and Innovation of Harmonious Culture for College DormitoryQuality Information Management of Inventory Assets Based on Equipment Defect ArchivesThe Ideal of the Public Management Majors Setting up the National Affairs Management Course in Colleges and UniversitiesNeuro-Industrial Engineering: Research and PracticeA Study on Benign Construction of PETOE through Joint Training Model of University-Enterprise CooperationElementary Analysis on Construction of Assessment Index System of Cleaner Production of Cheese Dyeing EnterprisesTobacco Industry Collaborating Supply Chain Research and StrategyStudy of Influences on Interest Rate Changes between 2007 and 2011 to Real Estate Development Investment in Henan ProvinceConstruction of Patent Infringement Litigation Early Warning Index System for the Pharmaceutical EnterprisesSurvey on Technology of the Smart GridResearch on Maintenance Force Location ModelResearch on the External Characteristics & Binding Mechanism of the Environment ProjectThe Study of MTA Production Model and Production ProcessesAn Optimization Discusses of College Teaching Material Inventory Based on Supply Chain ManagementStudy of the Initial Well Production Line of Adjusted Wells in X OilfieldResearch on the Evaluation Index System of Technological Innovation Capability in Cement IndustryA Methodology for Evaluation of Distribution System Anti-Disaster Ability in Inclement WeatherThe Contribution Analysis of Science and Technology Service Industry of Shenyang to Manufacturing Industry - Based on Clustering Analysis on Direct Consumption CoefficientCountermeasure Research about Cost Control of Automatic Lathe Tool Changing SystemStatistical Analysis of the Failure Modes and Causes of the Failure Blades of the Aviation Engine

Ihre Fragen, Wünsche oder Anmerkungen
Vorname*
Nachname*
Ihre E-Mail-Adresse*
Kundennr.
Ihre Nachricht*
Lediglich mit * gekennzeichnete Felder sind Pflichtfelder.
Wenn Sie die im Kontaktformular eingegebenen Daten durch Klick auf den nachfolgenden Button übersenden, erklären Sie sich damit einverstanden, dass wir Ihr Angaben für die Beantwortung Ihrer Anfrage verwenden. Selbstverständlich werden Ihre Daten vertraulich behandelt und nicht an Dritte weitergegeben. Sie können der Verwendung Ihrer Daten jederzeit widersprechen. Das Datenhandling bei Sack Fachmedien erklären wir Ihnen in unserer Datenschutzerklärung.